diff options
Diffstat (limited to 'drivers/ata/pata_hpt37x.c')
| -rw-r--r-- | drivers/ata/pata_hpt37x.c | 61 |
1 files changed, 20 insertions, 41 deletions
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index fb37e3a161fc..c10fcd31418d 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -341,19 +341,7 @@ static int hpt37x_pre_reset(struct ata_link *link, unsigned long deadline) return ata_std_prereset(link, deadline); } -/** - * hpt37x_error_handler - reset the hpt374 - * @ap: ATA port to reset - * - * Perform probe for HPT37x, except for HPT374 channel 2 - */ - -static void hpt37x_error_handler(struct ata_port *ap) -{ - ata_bmdma_drive_eh(ap, hpt37x_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - -static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline) +static int hpt374_fn1_pre_reset(struct ata_link *link, unsigned long deadline) { static const struct pci_bits hpt37x_enable_bits[] = { { 0x50, 1, 0x04, 0x04 }, @@ -390,25 +378,6 @@ static int hpt374_pre_reset(struct ata_link *link, unsigned long deadline) } /** - * hpt374_error_handler - reset the hpt374 - * @classes: - * - * The 374 cable detect is a little different due to the extra - * channels. The function 0 channels work like usual but function 1 - * is special - */ - -static void hpt374_error_handler(struct ata_port *ap) -{ - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - - if (!(PCI_FUNC(pdev->devfn) & 1)) - hpt37x_error_handler(ap); - else - ata_bmdma_drive_eh(ap, hpt374_pre_reset, ata_std_softreset, NULL, ata_std_postreset); -} - -/** * hpt370_set_piomode - PIO setup * @ap: ATA interface * @adev: device on the interface @@ -635,7 +604,7 @@ static struct ata_port_operations hpt370_port_ops = { .mode_filter = hpt370_filter, .set_piomode = hpt370_set_piomode, .set_dmamode = hpt370_set_dmamode, - .error_handler = hpt37x_error_handler, + .prereset = hpt37x_pre_reset, }; /* @@ -659,17 +628,17 @@ static struct ata_port_operations hpt372_port_ops = { .set_piomode = hpt372_set_piomode, .set_dmamode = hpt372_set_dmamode, - .error_handler = hpt37x_error_handler, + .prereset = hpt37x_pre_reset, }; /* * Configuration for HPT374. Mode setting works like 372 and friends - * but we have a different cable detection procedure. + * but we have a different cable detection procedure for function 1. */ -static struct ata_port_operations hpt374_port_ops = { +static struct ata_port_operations hpt374_fn1_port_ops = { .inherits = &hpt372_port_ops, - .error_handler = hpt374_error_handler, + .prereset = hpt374_fn1_pre_reset, }; /** @@ -821,13 +790,20 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) .udma_mask = ATA_UDMA6, .port_ops = &hpt372_port_ops }; - /* HPT374 - UDMA100 */ - static const struct ata_port_info info_hpt374 = { + /* HPT374 - UDMA100, function 1 uses different prereset method */ + static const struct ata_port_info info_hpt374_fn0 = { + .flags = ATA_FLAG_SLAVE_POSS, + .pio_mask = 0x1f, + .mwdma_mask = 0x07, + .udma_mask = ATA_UDMA5, + .port_ops = &hpt372_port_ops + }; + static const struct ata_port_info info_hpt374_fn1 = { .flags = ATA_FLAG_SLAVE_POSS, .pio_mask = 0x1f, .mwdma_mask = 0x07, .udma_mask = ATA_UDMA5, - .port_ops = &hpt374_port_ops + .port_ops = &hpt374_fn1_port_ops }; static const int MHz[4] = { 33, 40, 50, 66 }; @@ -912,7 +888,10 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id) break; case PCI_DEVICE_ID_TTI_HPT374: chip_table = &hpt374; - ppi[0] = &info_hpt374; + if (!(PCI_FUNC(dev->devfn) & 1)) + *ppi = &info_hpt374_fn0; + else + *ppi = &info_hpt374_fn1; break; default: printk(KERN_ERR "pata_hpt37x: PCI table is bogus please report (%d).\n", dev->device); |