1 files changed, 809 insertions, 0 deletions

diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
new file mode 100644
index 000000000000..b67817e440c5
--- /dev/null
+++ b/drivers/ata/sata_inic162x.c
@@ -0,0 +1,809 @@
+/*
+ * sata_inic162x.c - Driver for Initio 162x SATA controllers
+ *
+ * Copyright 2006  SUSE Linux Products GmbH
+ * Copyright 2006  Tejun Heo <teheo@novell.com>
+ *
+ * This file is released under GPL v2.
+ *
+ * This controller is eccentric and easily locks up if something isn't
+ * right.  Documentation is available at initio's website but it only
+ * documents registers (not programming model).
+ *
+ * - ATA disks work.
+ * - Hotplug works.
+ * - ATAPI read works but burning doesn't.  This thing is really
+ *   peculiar about ATAPI and I couldn't figure out how ATAPI PIO and
+ *   ATAPI DMA WRITE should be programmed.  If you've got a clue, be
+ *   my guest.
+ * - Both STR and STD work.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_device.h>
+
+#define DRV_NAME	"sata_inic162x"
+#define DRV_VERSION	"0.1"
+
+enum {
+	MMIO_BAR		= 5,
+
+	NR_PORTS		= 2,
+
+	HOST_CTL		= 0x7c,
+	HOST_STAT		= 0x7e,
+	HOST_IRQ_STAT		= 0xbc,
+	HOST_IRQ_MASK		= 0xbe,
+
+	PORT_SIZE		= 0x40,
+
+	/* registers for ATA TF operation */
+	PORT_TF			= 0x00,
+	PORT_ALT_STAT		= 0x08,
+	PORT_IRQ_STAT		= 0x09,
+	PORT_IRQ_MASK		= 0x0a,
+	PORT_PRD_CTL		= 0x0b,
+	PORT_PRD_ADDR		= 0x0c,
+	PORT_PRD_XFERLEN	= 0x10,
+
+	/* IDMA register */
+	PORT_IDMA_CTL		= 0x14,
+
+	PORT_SCR		= 0x20,
+
+	/* HOST_CTL bits */
+	HCTL_IRQOFF		= (1 << 8),  /* global IRQ off */
+	HCTL_PWRDWN		= (1 << 13), /* power down PHYs */
+	HCTL_SOFTRST		= (1 << 13), /* global reset (no phy reset) */
+	HCTL_RPGSEL		= (1 << 15), /* register page select */
+
+	HCTL_KNOWN_BITS		= HCTL_IRQOFF | HCTL_PWRDWN | HCTL_SOFTRST |
+				  HCTL_RPGSEL,
+
+	/* HOST_IRQ_(STAT|MASK) bits */
+	HIRQ_PORT0		= (1 << 0),
+	HIRQ_PORT1		= (1 << 1),
+	HIRQ_SOFT		= (1 << 14),
+	HIRQ_GLOBAL		= (1 << 15), /* STAT only */
+
+	/* PORT_IRQ_(STAT|MASK) bits */
+	PIRQ_OFFLINE		= (1 << 0),  /* device unplugged */
+	PIRQ_ONLINE		= (1 << 1),  /* device plugged */
+	PIRQ_COMPLETE		= (1 << 2),  /* completion interrupt */
+	PIRQ_FATAL		= (1 << 3),  /* fatal error */
+	PIRQ_ATA		= (1 << 4),  /* ATA interrupt */
+	PIRQ_REPLY		= (1 << 5),  /* reply FIFO not empty */
+	PIRQ_PENDING		= (1 << 7),  /* port IRQ pending (STAT only) */
+
+	PIRQ_ERR		= PIRQ_OFFLINE | PIRQ_ONLINE | PIRQ_FATAL,
+
+	PIRQ_MASK_DMA_READ	= PIRQ_REPLY | PIRQ_ATA,
+	PIRQ_MASK_OTHER		= PIRQ_REPLY | PIRQ_COMPLETE,
+	PIRQ_MASK_FREEZE	= 0xff,
+
+	/* PORT_PRD_CTL bits */
+	PRD_CTL_START		= (1 << 0),
+	PRD_CTL_WR		= (1 << 3),
+	PRD_CTL_DMAEN		= (1 << 7),  /* DMA enable */
+
+	/* PORT_IDMA_CTL bits */
+	IDMA_CTL_RST_ATA	= (1 << 2),  /* hardreset ATA bus */
+	IDMA_CTL_RST_IDMA	= (1 << 5),  /* reset IDMA machinary */
+	IDMA_CTL_GO		= (1 << 7),  /* IDMA mode go */
+	IDMA_CTL_ATA_NIEN	= (1 << 8),  /* ATA IRQ disable */
+};
+
+struct inic_host_priv {
+	u16	cached_hctl;
+};
+
+struct inic_port_priv {
+	u8	dfl_prdctl;
+	u8	cached_prdctl;
+	u8	cached_pirq_mask;
+};
+
+static int inic_slave_config(struct scsi_device *sdev)
+{
+	/* This controller is braindamaged.  dma_boundary is 0xffff
+	 * like others but it will lock up the whole machine HARD if
+	 * 65536 byte PRD entry is fed.  Reduce maximum segment size.
+	 */
+	blk_queue_max_segment_size(sdev->request_queue, 65536 - 512);
+
+	return ata_scsi_slave_config(sdev);
+}
+
+static struct scsi_host_template inic_sht = {
+	.module			= THIS_MODULE,
+	.name			= DRV_NAME,
+	.ioctl			= ata_scsi_ioctl,
+	.queuecommand		= ata_scsi_queuecmd,
+	.can_queue		= ATA_DEF_QUEUE,
+	.this_id		= ATA_SHT_THIS_ID,
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
+	.emulated		= ATA_SHT_EMULATED,
+	.use_clustering		= ATA_SHT_USE_CLUSTERING,
+	.proc_name		= DRV_NAME,
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+	.slave_configure	= inic_slave_config,
+	.slave_destroy		= ata_scsi_slave_destroy,
+	.bios_param		= ata_std_bios_param,
+	.suspend		= ata_scsi_device_suspend,
+	.resume			= ata_scsi_device_resume,
+};
+
+static const int scr_map[] = {
+	[SCR_STATUS]	= 0,
+	[SCR_ERROR]	= 1,
+	[SCR_CONTROL]	= 2,
+};
+
+static void __iomem * inic_port_base(struct ata_port *ap)
+{
+	return ap->host->mmio_base + ap->port_no * PORT_SIZE;
+}
+
+static void __inic_set_pirq_mask(struct ata_port *ap, u8 mask)
+{
+	void __iomem *port_base = inic_port_base(ap);
+	struct inic_port_priv *pp = ap->private_data;
+
+	writeb(mask, port_base + PORT_IRQ_MASK);
+	pp->cached_pirq_mask = mask;
+}
+
+static void inic_set_pirq_mask(struct ata_port *ap, u8 mask)
+{
+	struct inic_port_priv *pp = ap->private_data;
+
+	if (pp->cached_pirq_mask != mask)
+		__inic_set_pirq_mask(ap, mask);
+}
+
+static void inic_reset_port(void __iomem *port_base)
+{
+	void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
+	u16 ctl;
+
+	ctl = readw(idma_ctl);
+	ctl &= ~(IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN | IDMA_CTL_GO);
+
+	/* mask IRQ and assert reset */
+	writew(ctl | IDMA_CTL_RST_IDMA | IDMA_CTL_ATA_NIEN, idma_ctl);
+	readw(idma_ctl); /* flush */
+
+	/* give it some time */
+	msleep(1);
+
+	/* release reset */
+	writew(ctl | IDMA_CTL_ATA_NIEN, idma_ctl);
+
+	/* clear irq */
+	writeb(0xff, port_base + PORT_IRQ_STAT);
+
+	/* reenable ATA IRQ, turn off IDMA mode */
+	writew(ctl, idma_ctl);
+}
+
+static u32 inic_scr_read(struct ata_port *ap, unsigned sc_reg)
+{
+	void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+	void __iomem *addr;
+	u32 val;
+
+	if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
+		return 0xffffffffU;
+
+	addr = scr_addr + scr_map[sc_reg] * 4;
+	val = readl(scr_addr + scr_map[sc_reg] * 4);
+
+	/* this controller has stuck DIAG.N, ignore it */
+	if (sc_reg == SCR_ERROR)
+		val &= ~SERR_PHYRDY_CHG;
+	return val;
+}
+
+static void inic_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val)
+{
+	void __iomem *scr_addr = (void __iomem *)ap->ioaddr.scr_addr;
+	void __iomem *addr;
+
+	if (unlikely(sc_reg >= ARRAY_SIZE(scr_map)))
+		return;
+
+	addr = scr_addr + scr_map[sc_reg] * 4;
+	writel(val, scr_addr + scr_map[sc_reg] * 4);
+}
+
+/*
+ * In TF mode, inic162x is very similar to SFF device.  TF registers
+ * function the same.  DMA engine behaves similary using the same PRD
+ * format as BMDMA but different command register, interrupt and event
+ * notification methods are used.  The following inic_bmdma_*()
+ * functions do the impedance matching.
+ */
+static void inic_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct inic_port_priv *pp = ap->private_data;
+	void __iomem *port_base = inic_port_base(ap);
+	int rw = qc->tf.flags & ATA_TFLAG_WRITE;
+
+	/* make sure device sees PRD table writes */
+	wmb();
+
+	/* load transfer length */
+	writel(qc->nbytes, port_base + PORT_PRD_XFERLEN);
+
+	/* turn on DMA and specify data direction */
+	pp->cached_prdctl = pp->dfl_prdctl | PRD_CTL_DMAEN;
+	if (!rw)
+		pp->cached_prdctl |= PRD_CTL_WR;
+	writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
+
+	/* issue r/w command */
+	ap->ops->exec_command(ap, &qc->tf);
+}
+
+static void inic_bmdma_start(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct inic_port_priv *pp = ap->private_data;
+	void __iomem *port_base = inic_port_base(ap);
+
+	/* start host DMA transaction */
+	pp->cached_prdctl |= PRD_CTL_START;
+	writeb(pp->cached_prdctl, port_base + PORT_PRD_CTL);
+}
+
+static void inic_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct inic_port_priv *pp = ap->private_data;
+	void __iomem *port_base = inic_port_base(ap);
+
+	/* stop DMA engine */
+	writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
+}
+
+static u8 inic_bmdma_status(struct ata_port *ap)
+{
+	/* event is already verified by the interrupt handler */
+	return ATA_DMA_INTR;
+}
+
+static void inic_irq_clear(struct ata_port *ap)
+{
+	/* noop */
+}
+
+static void inic_host_intr(struct ata_port *ap)
+{
+	void __iomem *port_base = inic_port_base(ap);
+	struct ata_eh_info *ehi = &ap->eh_info;
+	u8 irq_stat;
+
+	/* fetch and clear irq */
+	irq_stat = readb(port_base + PORT_IRQ_STAT);
+	writeb(irq_stat, port_base + PORT_IRQ_STAT);
+
+	if (likely(!(irq_stat & PIRQ_ERR))) {
+		struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+
+		if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+			ata_chk_status(ap);	/* clear ATA interrupt */
+			return;
+		}
+
+		if (likely(ata_host_intr(ap, qc)))
+			return;
+
+		ata_chk_status(ap);	/* clear ATA interrupt */
+		ata_port_printk(ap, KERN_WARNING, "unhandled "
+				"interrupt, irq_stat=%x\n", irq_stat);
+		return;
+	}
+
+	/* error */
+	ata_ehi_push_desc(ehi, "irq_stat=0x%x", irq_stat);
+
+	if (irq_stat & (PIRQ_OFFLINE | PIRQ_ONLINE)) {
+		ata_ehi_hotplugged(ehi);
+		ata_port_freeze(ap);
+	} else
+		ata_port_abort(ap);
+}
+
+static irqreturn_t inic_interrupt(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	void __iomem *mmio_base = host->mmio_base;
+	u16 host_irq_stat;
+	int i, handled = 0;;
+
+	host_irq_stat = readw(mmio_base + HOST_IRQ_STAT);
+
+	if (unlikely(!(host_irq_stat & HIRQ_GLOBAL)))
+		goto out;
+
+	spin_lock(&host->lock);
+
+	for (i = 0; i < NR_PORTS; i++) {
+		struct ata_port *ap = host->ports[i];
+
+		if (!(host_irq_stat & (HIRQ_PORT0 << i)))
+			continue;
+
+		if (likely(ap && !(ap->flags & ATA_FLAG_DISABLED))) {
+			inic_host_intr(ap);
+			handled++;
+		} else {
+			if (ata_ratelimit())
+				dev_printk(KERN_ERR, host->dev, "interrupt "
+					   "from disabled port %d (0x%x)\n",
+					   i, host_irq_stat);
+		}
+	}
+
+	spin_unlock(&host->lock);
+
+ out:
+	return IRQ_RETVAL(handled);
+}
+
+static unsigned int inic_qc_issue(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+
+	/* ATA IRQ doesn't wait for DMA transfer completion and vice
+	 * versa.  Mask IRQ selectively to detect command completion.
+	 * Without it, ATA DMA read command can cause data corruption.
+	 *
+	 * Something similar might be needed for ATAPI writes.  I
+	 * tried a lot of combinations but couldn't find the solution.
+	 */
+	if (qc->tf.protocol == ATA_PROT_DMA &&
+	    !(qc->tf.flags & ATA_TFLAG_WRITE))
+		inic_set_pirq_mask(ap, PIRQ_MASK_DMA_READ);
+	else
+		inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+
+	/* Issuing a command to yet uninitialized port locks up the
+	 * controller.  Most of the time, this happens for the first
+	 * command after reset which are ATA and ATAPI IDENTIFYs.
+	 * Fast fail if stat is 0x7f or 0xff for those commands.
+	 */
+	if (unlikely(qc->tf.command == ATA_CMD_ID_ATA ||
+		     qc->tf.command == ATA_CMD_ID_ATAPI)) {
+		u8 stat = ata_chk_status(ap);
+		if (stat == 0x7f || stat == 0xff)
+			return AC_ERR_HSM;
+	}
+
+	return ata_qc_issue_prot(qc);
+}
+
+static void inic_freeze(struct ata_port *ap)
+{
+	void __iomem *port_base = inic_port_base(ap);
+
+	__inic_set_pirq_mask(ap, PIRQ_MASK_FREEZE);
+
+	ata_chk_status(ap);
+	writeb(0xff, port_base + PORT_IRQ_STAT);
+
+	readb(port_base + PORT_IRQ_STAT); /* flush */
+}
+
+static void inic_thaw(struct ata_port *ap)
+{
+	void __iomem *port_base = inic_port_base(ap);
+
+	ata_chk_status(ap);
+	writeb(0xff, port_base + PORT_IRQ_STAT);
+
+	__inic_set_pirq_mask(ap, PIRQ_MASK_OTHER);
+
+	readb(port_base + PORT_IRQ_STAT); /* flush */
+}
+
+/*
+ * SRST and SControl hardreset don't give valid signature on this
+ * controller.  Only controller specific hardreset mechanism works.
+ */
+static int inic_hardreset(struct ata_port *ap, unsigned int *class)
+{
+	void __iomem *port_base = inic_port_base(ap);
+	void __iomem *idma_ctl = port_base + PORT_IDMA_CTL;
+	const unsigned long *timing = sata_ehc_deb_timing(&ap->eh_context);
+	u16 val;
+	int rc;
+
+	/* hammer it into sane state */
+	inic_reset_port(port_base);
+
+	if (ata_port_offline(ap)) {
+		*class = ATA_DEV_NONE;
+		return 0;
+	}
+
+	val = readw(idma_ctl);
+	writew(val | IDMA_CTL_RST_ATA, idma_ctl);
+	readw(idma_ctl);	/* flush */
+	msleep(1);
+	writew(val & ~IDMA_CTL_RST_ATA, idma_ctl);
+
+	rc = sata_phy_resume(ap, timing);
+	if (rc) {
+		ata_port_printk(ap, KERN_WARNING, "failed to resume "
+				"link for reset (errno=%d)\n", rc);
+		return rc;
+	}
+
+	msleep(150);
+
+	*class = ATA_DEV_NONE;
+	if (ata_port_online(ap)) {
+		struct ata_taskfile tf;
+
+		if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
+			ata_port_printk(ap, KERN_WARNING,
+					"device busy after hardreset\n");
+			return -EIO;
+		}
+
+		ata_tf_read(ap, &tf);
+		*class = ata_dev_classify(&tf);
+		if (*class == ATA_DEV_UNKNOWN)
+			*class = ATA_DEV_NONE;
+	}
+
+	return 0;
+}
+
+static void inic_error_handler(struct ata_port *ap)
+{
+	void __iomem *port_base = inic_port_base(ap);
+	struct inic_port_priv *pp = ap->private_data;
+	unsigned long flags;
+
+	/* reset PIO HSM and stop DMA engine */
+	inic_reset_port(port_base);
+
+	spin_lock_irqsave(ap->lock, flags);
+	ap->hsm_task_state = HSM_ST_IDLE;
+	writeb(pp->dfl_prdctl, port_base + PORT_PRD_CTL);
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	/* PIO and DMA engines have been stopped, perform recovery */
+	ata_do_eh(ap, ata_std_prereset, NULL, inic_hardreset,
+		  ata_std_postreset);
+}
+
+static void inic_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+	/* make DMA engine forget about the failed command */
+	if (qc->err_mask)
+		inic_reset_port(inic_port_base(qc->ap));
+}
+
+static void inic_dev_config(struct ata_port *ap, struct ata_device *dev)
+{
+	/* inic can only handle upto LBA28 max sectors */
+	if (dev->max_sectors > ATA_MAX_SECTORS)
+		dev->max_sectors = ATA_MAX_SECTORS;
+}
+
+static void init_port(struct ata_port *ap)
+{
+	void __iomem *port_base = inic_port_base(ap);
+
+	/* Setup PRD address */
+	writel(ap->prd_dma, port_base + PORT_PRD_ADDR);
+}
+
+static int inic_port_resume(struct ata_port *ap)
+{
+	init_port(ap);
+	return 0;
+}
+
+static int inic_port_start(struct ata_port *ap)
+{
+	void __iomem *port_base = inic_port_base(ap);
+	struct inic_port_priv *pp;
+	u8 tmp;
+	int rc;
+
+	/* alloc and initialize private data */
+	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
+	if (!pp)
+		return -ENOMEM;
+	ap->private_data = pp;
+
+	/* default PRD_CTL value, DMAEN, WR and START off */
+	tmp = readb(port_base + PORT_PRD_CTL);
+	tmp &= ~(PRD_CTL_DMAEN | PRD_CTL_WR | PRD_CTL_START);
+	pp->dfl_prdctl = tmp;
+
+	/* Alloc resources */
+	rc = ata_port_start(ap);
+	if (rc) {
+		kfree(pp);
+		return rc;
+	}
+
+	init_port(ap);
+
+	return 0;
+}
+
+static void inic_port_stop(struct ata_port *ap)
+{
+	ata_port_stop(ap);
+	kfree(ap->private_data);
+}
+
+static struct ata_port_operations inic_port_ops = {
+	.port_disable		= ata_port_disable,
+	.tf_load		= ata_tf_load,
+	.tf_read		= ata_tf_read,
+	.check_status		= ata_check_status,
+	.exec_command		= ata_exec_command,
+	.dev_select		= ata_std_dev_select,
+
+	.scr_read		= inic_scr_read,
+	.scr_write		= inic_scr_write,
+
+	.bmdma_setup		= inic_bmdma_setup,
+	.bmdma_start		= inic_bmdma_start,
+	.bmdma_stop		= inic_bmdma_stop,
+	.bmdma_status		= inic_bmdma_status,
+
+	.irq_handler		= inic_interrupt,
+	.irq_clear		= inic_irq_clear,
+
+	.qc_prep	 	= ata_qc_prep,
+	.qc_issue		= inic_qc_issue,
+	.data_xfer		= ata_pio_data_xfer,
+
+	.freeze			= inic_freeze,
+	.thaw			= inic_thaw,
+	.error_handler		= inic_error_handler,
+	.post_internal_cmd	= inic_post_internal_cmd,
+	.dev_config		= inic_dev_config,
+
+	.port_resume		= inic_port_resume,
+
+	.port_start		= inic_port_start,
+	.port_stop		= inic_port_stop,
+	.host_stop		= ata_pci_host_stop
+};
+
+static struct ata_port_info inic_port_info = {
+	.sht			= &inic_sht,
+	/* For some reason, ATA_PROT_ATAPI is broken on this
+	 * controller, and no, PIO_POLLING does't fix it.  It somehow
+	 * manages to report the wrong ireason and ignoring ireason
+	 * results in machine lock up.  Tell libata to always prefer
+	 * DMA.
+	 */
+	.flags			= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
+	.pio_mask		= 0x1f,	/* pio0-4 */
+	.mwdma_mask		= 0x07, /* mwdma0-2 */
+	.udma_mask		= 0x7f,	/* udma0-6 */
+	.port_ops		= &inic_port_ops
+};
+
+static int init_controller(void __iomem *mmio_base, u16 hctl)
+{
+	int i;
+	u16 val;
+
+	hctl &= ~HCTL_KNOWN_BITS;
+
+	/* Soft reset whole controller.  Spec says reset duration is 3
+	 * PCI clocks, be generous and give it 10ms.
+	 */
+	writew(hctl | HCTL_SOFTRST, mmio_base + HOST_CTL);
+	readw(mmio_base + HOST_CTL); /* flush */
+
+	for (i = 0; i < 10; i++) {
+		msleep(1);
+		val = readw(mmio_base + HOST_CTL);
+		if (!(val & HCTL_SOFTRST))
+			break;
+	}
+
+	if (val & HCTL_SOFTRST)
+		return -EIO;
+
+	/* mask all interrupts and reset ports */
+	for (i = 0; i < NR_PORTS; i++) {
+		void __iomem *port_base = mmio_base + i * PORT_SIZE;
+
+		writeb(0xff, port_base + PORT_IRQ_MASK);
+		inic_reset_port(port_base);
+	}
+
+	/* port IRQ is masked now, unmask global IRQ */
+	writew(hctl & ~HCTL_IRQOFF, mmio_base + HOST_CTL);
+	val = readw(mmio_base + HOST_IRQ_MASK);
+	val &= ~(HIRQ_PORT0 | HIRQ_PORT1);
+	writew(val, mmio_base + HOST_IRQ_MASK);
+
+	return 0;
+}
+
+static int inic_pci_device_resume(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct inic_host_priv *hpriv = host->private_data;
+	void __iomem *mmio_base = host->mmio_base;
+	int rc;
+
+	ata_pci_device_do_resume(pdev);
+
+	if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
+		printk("XXX\n");
+		rc = init_controller(mmio_base, hpriv->cached_hctl);
+		if (rc)
+			return rc;
+	}
+
+	ata_host_resume(host);
+
+	return 0;
+}
+
+static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	static int printed_version;
+	struct ata_port_info *pinfo = &inic_port_info;
+	struct ata_probe_ent *probe_ent;
+	struct inic_host_priv *hpriv;
+	void __iomem *mmio_base;
+	int i, rc;
+
+	if (!printed_version++)
+		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+	rc = pci_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc)
+		goto err_out;
+
+	rc = -ENOMEM;
+	mmio_base = pci_iomap(pdev, MMIO_BAR, 0);
+	if (!mmio_base)
+		goto err_out_regions;
+
+	/* Set dma_mask.  This devices doesn't support 64bit addressing. */
+	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	if (rc) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "32-bit DMA enable failed\n");
+		goto err_out_map;
+	}
+
+	rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+	if (rc) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "32-bit consistent DMA enable failed\n");
+		goto err_out_map;
+	}
+
+	rc = -ENOMEM;
+	probe_ent = kzalloc(sizeof(*probe_ent), GFP_KERNEL);
+	if (!probe_ent)
+		goto err_out_map;
+
+	hpriv = kzalloc(sizeof(*hpriv), GFP_KERNEL);
+	if (!hpriv)
+		goto err_out_ent;
+
+	probe_ent->dev = &pdev->dev;
+	INIT_LIST_HEAD(&probe_ent->node);
+
+	probe_ent->sht			= pinfo->sht;
+	probe_ent->port_flags		= pinfo->flags;
+	probe_ent->pio_mask		= pinfo->pio_mask;
+	probe_ent->mwdma_mask		= pinfo->mwdma_mask;
+	probe_ent->udma_mask		= pinfo->udma_mask;
+	probe_ent->port_ops		= pinfo->port_ops;
+	probe_ent->n_ports		= NR_PORTS;
+
+	probe_ent->irq = pdev->irq;
+	probe_ent->irq_flags = SA_SHIRQ;
+
+	probe_ent->mmio_base = mmio_base;
+
+	for (i = 0; i < NR_PORTS; i++) {
+		struct ata_ioports *port = &probe_ent->port[i];
+		unsigned long port_base =
+			(unsigned long)mmio_base + i * PORT_SIZE;
+
+		port->cmd_addr = pci_resource_start(pdev, 2 * i);
+		port->altstatus_addr =
+		port->ctl_addr =
+			pci_resource_start(pdev, 2 * i + 1) | ATA_PCI_CTL_OFS;
+		port->scr_addr = port_base + PORT_SCR;
+
+		ata_std_ports(port);
+	}
+
+	probe_ent->private_data = hpriv;
+	hpriv->cached_hctl = readw(mmio_base + HOST_CTL);
+
+	rc = init_controller(mmio_base, hpriv->cached_hctl);
+	if (rc) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "failed to initialize controller\n");
+		goto err_out_hpriv;
+	}
+
+	pci_set_master(pdev);
+
+	rc = -ENODEV;
+	if (!ata_device_add(probe_ent))
+		goto err_out_hpriv;
+
+	kfree(probe_ent);
+
+	return 0;
+
+ err_out_hpriv:
+	kfree(hpriv);
+ err_out_ent:
+	kfree(probe_ent);
+ err_out_map:
+	pci_iounmap(pdev, mmio_base);
+ err_out_regions:
+	pci_release_regions(pdev);
+ err_out:
+	pci_disable_device(pdev);
+	return rc;
+}
+
+static const struct pci_device_id inic_pci_tbl[] = {
+	{ PCI_VDEVICE(INIT, 0x1622), },
+	{ },
+};
+
+static struct pci_driver inic_pci_driver = {
+	.name 		= DRV_NAME,
+	.id_table	= inic_pci_tbl,
+	.suspend	= ata_pci_device_suspend,
+	.resume		= inic_pci_device_resume,
+	.probe 		= inic_init_one,
+	.remove		= ata_pci_remove_one,
+};
+
+static int __init inic_init(void)
+{
+	return pci_register_driver(&inic_pci_driver);
+}
+
+static void __exit inic_exit(void)
+{
+	pci_unregister_driver(&inic_pci_driver);
+}
+
+MODULE_AUTHOR("Tejun Heo");
+MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(inic_init);
+module_exit(inic_exit);