diff options
Diffstat (limited to 'drivers/ata/sata_nv.c')
| -rw-r--r-- | drivers/ata/sata_nv.c | 131 |
1 files changed, 81 insertions, 50 deletions
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6cda12ba8122..b2d11f300c39 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -305,8 +305,8 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); -static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); static void nv_ck804_freeze(struct ata_port *ap); @@ -406,49 +406,82 @@ static struct scsi_host_template nv_swncq_sht = { .slave_configure = nv_swncq_slave_config, }; -static struct ata_port_operations nv_common_ops = { +/* + * NV SATA controllers have various different problems with hardreset + * protocol depending on the specific controller and device. + * + * GENERIC: + * + * bko11195 reports that link doesn't come online after hardreset on + * generic nv's and there have been several other similar reports on + * linux-ide. + * + * bko12351#c23 reports that warmplug on MCP61 doesn't work with + * softreset. + * + * NF2/3: + * + * bko3352 reports nf2/3 controllers can't determine device signature + * reliably after hardreset. The following thread reports detection + * failure on cold boot with the standard debouncing timing. + * + * http://thread.gmane.org/gmane.linux.ide/34098 + * + * bko12176 reports that hardreset fails to bring up the link during + * boot on nf2. + * + * CK804: + * + * For initial probing after boot and hot plugging, hardreset mostly + * works fine on CK804 but curiously, reprobing on the initial port + * by rescanning or rmmod/insmod fails to acquire the initial D2H Reg + * FIS in somewhat undeterministic way. + * + * SWNCQ: + * + * bko12351 reports that when SWNCQ is enabled, for hotplug to work, + * hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. + * + * bko12703 reports that boot probing fails for intel SSD with + * hardreset. Link fails to come online. Softreset works fine. + * + * The failures are varied but the following patterns seem true for + * all flavors. + * + * - Softreset during boot always works. + * + * - Hardreset during boot sometimes fails to bring up the link on + * certain comibnations and device signature acquisition is + * unreliable. + * + * - Hardreset is often necessary after hotplug. + * + * So, preferring softreset for boot probing and error handling (as + * hardreset might bring down the link) but using hardreset for + * post-boot probing should work around the above issues in most + * cases. Define nv_hardreset() which only kicks in for post-boot + * probing and use it for all variants. + */ +static struct ata_port_operations nv_generic_ops = { .inherits = &ata_bmdma_port_ops, .lost_interrupt = ATA_OP_NULL, .scr_read = nv_scr_read, .scr_write = nv_scr_write, + .hardreset = nv_hardreset, }; -/* OSDL bz11195 reports that link doesn't come online after hardreset - * on generic nv's and there have been several other similar reports - * on linux-ide. Disable hardreset for generic nv's. - */ -static struct ata_port_operations nv_generic_ops = { - .inherits = &nv_common_ops, - .hardreset = ATA_OP_NULL, -}; - -/* nf2 is ripe with hardreset related problems. - * - * kernel bz#3352 reports nf2/3 controllers can't determine device - * signature reliably. The following thread reports detection failure - * on cold boot with the standard debouncing timing. - * - * http://thread.gmane.org/gmane.linux.ide/34098 - * - * And bz#12176 reports that hardreset simply doesn't work on nf2. - * Give up on it and just don't do hardreset. - */ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_generic_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, }; -/* For initial probing after boot and hot plugging, hardreset mostly - * works fine on CK804 but curiously, reprobing on the initial port by - * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS - * in somewhat undeterministic way. Use noclassify hardreset. - */ static struct ata_port_operations nv_ck804_ops = { - .inherits = &nv_common_ops, + .inherits = &nv_generic_ops, .freeze = nv_ck804_freeze, .thaw = nv_ck804_thaw, - .hardreset = nv_noclassify_hardreset, .host_stop = nv_ck804_host_stop, }; @@ -476,19 +509,8 @@ static struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; -/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to - * work, hardreset should be used and hardreset can't report proper - * signature, which suggests that mcp5x is closer to nf2 as long as - * reset quirkiness is concerned. Define separate ops for mcp5x with - * nv_noclassify_hardreset(). - */ -static struct ata_port_operations nv_mcp5x_ops = { - .inherits = &nv_common_ops, - .hardreset = nv_noclassify_hardreset, -}; - static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_mcp5x_ops, + .inherits = &nv_generic_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -557,7 +579,7 @@ static const struct ata_port_info nv_port_info[] = { .pio_mask = NV_PIO_MASK, .mwdma_mask = NV_MWDMA_MASK, .udma_mask = NV_UDMA_MASK, - .port_ops = &nv_mcp5x_ops, + .port_ops = &nv_generic_ops, .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), }, /* SWNCQ */ @@ -1559,15 +1581,24 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } -static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int nv_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) { - bool online; - int rc; + struct ata_eh_context *ehc = &link->eh_context; - rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, - &online, NULL); - return online ? -EAGAIN : rc; + /* Do hardreset iff it's post-boot probing, please read the + * comment above port ops for details. + */ + if (!(link->ap->pflags & ATA_PFLAG_LOADING) && + !ata_dev_enabled(link->device)) + sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + NULL, NULL); + else if (!(ehc->i.flags & ATA_EHI_QUIET)) + ata_link_printk(link, KERN_INFO, + "nv: skipping hardreset on occupied port\n"); + + /* device signature acquisition is unreliable */ + return -EAGAIN; } static void nv_nf2_freeze(struct ata_port *ap) |