diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/ahci.c | 57 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 29 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 30 | ||||
-rw-r--r-- | drivers/ata/libata-sff.c | 27 | ||||
-rw-r--r-- | drivers/ata/pata_hpt37x.c | 22 | ||||
-rw-r--r-- | drivers/ata/pata_legacy.c | 37 | ||||
-rw-r--r-- | drivers/ata/pata_ninja32.c | 4 | ||||
-rw-r--r-- | drivers/ata/pata_via.c | 74 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 58 | ||||
-rw-r--r-- | drivers/ata/sata_via.c | 2 |
10 files changed, 251 insertions, 89 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 57be6bea48eb..08186ecbaf8d 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -114,6 +114,7 @@ enum { board_ahci_sb700 = 5, /* for SB700 and SB800 */ board_ahci_mcp65 = 6, board_ahci_nopmp = 7, + board_ahci_yesncq = 8, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -469,6 +470,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_yesncq */ + { + AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -535,30 +544,30 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */ - { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */ - { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0553), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0554), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0555), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0556), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0557), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0558), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x0559), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055a), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x055b), board_ahci_yesncq }, /* MCP67 */ + { PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci_yesncq }, /* MCP73 */ + { PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci_yesncq }, /* MCP73 */ { PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */ { PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */ { PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e7ea77cf6069..17c5d48a75d2 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1231,6 +1231,9 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) * * We follow the current spec and consider that 0x69/0x96 * identifies a port multiplier and 0x3c/0xc3 a SEMB device. + * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports + * SEMB signature. This is worked around in + * ata_dev_read_id(). */ if ((tf->lbam == 0) && (tf->lbah == 0)) { DPRINTK("found ATA device by sig\n"); @@ -1248,8 +1251,8 @@ unsigned int ata_dev_classify(const struct ata_taskfile *tf) } if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) { - printk(KERN_INFO "ata: SEMB device ignored\n"); - return ATA_DEV_SEMB_UNSUP; /* not yet */ + DPRINTK("found SEMB device by sig (could be ATA device)\n"); + return ATA_DEV_SEMB; } DPRINTK("unknown device\n"); @@ -1653,8 +1656,8 @@ unsigned long ata_id_xfermask(const u16 *id) /* * Process compact flash extended modes */ - int pio = id[163] & 0x7; - int dma = (id[163] >> 3) & 7; + int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7; + int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7; if (pio) pio_mask |= (1 << 5); @@ -2080,6 +2083,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class, struct ata_taskfile tf; unsigned int err_mask = 0; const char *reason; + bool is_semb = class == ATA_DEV_SEMB; int may_fallback = 1, tried_spinup = 0; int rc; @@ -2090,6 +2094,8 @@ retry: ata_tf_init(dev, &tf); switch (class) { + case ATA_DEV_SEMB: + class = ATA_DEV_ATA; /* some hard drives report SEMB sig */ case ATA_DEV_ATA: tf.command = ATA_CMD_ID_ATA; break; @@ -2126,6 +2132,14 @@ retry: return -ENOENT; } + if (is_semb) { + ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on " + "device w/ SEMB sig, disabled\n"); + /* SEMB is not supported yet */ + *p_class = ATA_DEV_SEMB_UNSUP; + return 0; + } + if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) { /* Device or controller might have reported * the wrong device class. Give a shot at the @@ -2412,7 +2426,8 @@ int ata_dev_configure(struct ata_device *dev) /* ATA-specific feature tests */ if (dev->class == ATA_DEV_ATA) { if (ata_id_is_cfa(id)) { - if (id[162] & 1) /* CPRM may make this media unusable */ + /* CPRM may make this media unusable */ + if (id[ATA_ID_CFA_KEY_MGMT] & 1) ata_dev_printk(dev, KERN_WARNING, "supports DRM functions and may " "not be fully accessable.\n"); @@ -6110,13 +6125,11 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht) ata_port_printk(ap, KERN_INFO, "DUMMY\n"); } - /* perform each probe synchronously */ - DPRINTK("probe begin\n"); + /* perform each probe asynchronously */ for (i = 0; i < host->n_ports; i++) { struct ata_port *ap = host->ports[i]; async_schedule(async_port_probe, ap); } - DPRINTK("probe end\n"); return 0; } diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index b9747fa59e54..2733b0c90b75 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -647,23 +647,45 @@ int ata_task_ioctl(struct scsi_device *scsidev, void __user *arg) return rc; } +static int ata_ioc32(struct ata_port *ap) +{ + if (ap->flags & ATA_FLAG_PIO_DMA) + return 1; + if (ap->pflags & ATA_PFLAG_PIO32) + return 1; + return 0; +} + int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev, int cmd, void __user *arg) { int val = -EINVAL, rc = -EINVAL; + unsigned long flags; switch (cmd) { case ATA_IOC_GET_IO32: - val = 0; + spin_lock_irqsave(ap->lock, flags); + val = ata_ioc32(ap); + spin_unlock_irqrestore(ap->lock, flags); if (copy_to_user(arg, &val, 1)) return -EFAULT; return 0; case ATA_IOC_SET_IO32: val = (unsigned long) arg; - if (val != 0) - return -EINVAL; - return 0; + rc = 0; + spin_lock_irqsave(ap->lock, flags); + if (ap->pflags & ATA_PFLAG_PIO32CHANGE) { + if (val) + ap->pflags |= ATA_PFLAG_PIO32; + else + ap->pflags &= ~ATA_PFLAG_PIO32; + } else { + if (val != ata_ioc32(ap)) + rc = -EINVAL; + } + spin_unlock_irqrestore(ap->lock, flags); + return rc; case HDIO_GET_IDENTITY: return ata_get_identity(ap, scsidev, arg); diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 8332e97a9de3..bb18415d3d63 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -87,6 +87,7 @@ const struct ata_port_operations ata_bmdma32_port_ops = { .inherits = &ata_bmdma_port_ops, .sff_data_xfer = ata_sff_data_xfer32, + .port_start = ata_sff_port_start32, }; EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); @@ -769,6 +770,9 @@ unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf, void __iomem *data_addr = ap->ioaddr.data_addr; unsigned int words = buflen >> 2; int slop = buflen & 3; + + if (!(ap->pflags & ATA_PFLAG_PIO32)) + return ata_sff_data_xfer(dev, buf, buflen, rw); /* Transfer multiple of 4 bytes */ if (rw == READ) @@ -2402,6 +2406,29 @@ int ata_sff_port_start(struct ata_port *ap) EXPORT_SYMBOL_GPL(ata_sff_port_start); /** + * ata_sff_port_start32 - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table if the device + * is DMA capable SFF. + * + * May be used as the port_start() entry in ata_port_operations for + * devices that are capable of 32bit PIO. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sff_port_start32(struct ata_port *ap) +{ + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + if (ap->ioaddr.bmdma_addr) + return ata_port_start(ap); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sff_port_start32); + +/** * ata_sff_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized * diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c index 81ab57003aba..122c786449a9 100644 --- a/drivers/ata/pata_hpt37x.c +++ b/drivers/ata/pata_hpt37x.c @@ -8,7 +8,7 @@ * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org> * Portions Copyright (C) 2001 Sun Microsystems, Inc. * Portions Copyright (C) 2003 Red Hat Inc - * Portions Copyright (C) 2005-2007 MontaVista Software, Inc. + * Portions Copyright (C) 2005-2009 MontaVista Software, Inc. * * TODO * Look into engine reset on timeout errors. Should not be required. @@ -24,7 +24,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_hpt37x" -#define DRV_VERSION "0.6.11" +#define DRV_VERSION "0.6.12" struct hpt_clock { u8 xfer_speed; @@ -445,23 +445,6 @@ static void hpt370_set_dmamode(struct ata_port *ap, struct ata_device *adev) } /** - * hpt370_bmdma_start - DMA engine begin - * @qc: ATA command - * - * The 370 and 370A want us to reset the DMA engine each time we - * use it. The 372 and later are fine. - */ - -static void hpt370_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct pci_dev *pdev = to_pci_dev(ap->host->dev); - pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37); - udelay(10); - ata_bmdma_start(qc); -} - -/** * hpt370_bmdma_end - DMA engine stop * @qc: ATA command * @@ -598,7 +581,6 @@ static struct scsi_host_template hpt37x_sht = { static struct ata_port_operations hpt370_port_ops = { .inherits = &ata_bmdma_port_ops, - .bmdma_start = hpt370_bmdma_start, .bmdma_stop = hpt370_bmdma_stop, .mode_filter = hpt370_filter, diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index 3f830f0fe2cc..f72c6c5b820f 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -108,6 +108,7 @@ struct legacy_controller { struct ata_port_operations *ops; unsigned int pio_mask; unsigned int flags; + unsigned int pflags; int (*setup)(struct platform_device *, struct legacy_probe *probe, struct legacy_data *data); }; @@ -284,9 +285,11 @@ static unsigned int pdc_data_xfer_vlb(struct ata_device *dev, unsigned char *buf, unsigned int buflen, int rw) { int slop = buflen & 3; + struct ata_port *ap = dev->link->ap; + /* 32bit I/O capable *and* we need to write a whole number of dwords */ - if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) { - struct ata_port *ap = dev->link->ap; + if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { unsigned long flags; local_irq_save(flags); @@ -736,7 +739,8 @@ static unsigned int vlb32_data_xfer(struct ata_device *adev, unsigned char *buf, struct ata_port *ap = adev->link->ap; int slop = buflen & 3; - if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) { + if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3) + && (ap->pflags & ATA_PFLAG_PIO32)) { if (rw == WRITE) iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2); else @@ -858,27 +862,30 @@ static struct ata_port_operations winbond_port_ops = { static struct legacy_controller controllers[] = { {"BIOS", &legacy_port_ops, 0x1F, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"Snooping", &simple_port_ops, 0x1F, - 0 , NULL }, + 0, 0, NULL }, {"PDC20230", &pdc20230_port_ops, 0x7, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL }, {"HT6560A", &ht6560a_port_ops, 0x07, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"HT6560B", &ht6560b_port_ops, 0x1F, - ATA_FLAG_NO_IORDY, NULL }, + ATA_FLAG_NO_IORDY, 0, NULL }, {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, - 0 , NULL }, + 0, 0, NULL }, {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, - 0 , NULL }, + 0, 0, NULL }, {"QDI6500", &qdi6500_port_ops, 0x07, - ATA_FLAG_NO_IORDY, qdi_port }, + ATA_FLAG_NO_IORDY, + ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"QDI6580", &qdi6580_port_ops, 0x1F, - 0 , qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, - 0 , qdi_port }, + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, {"W83759A", &winbond_port_ops, 0x1F, - 0 , winbond_port } + 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, + winbond_port } }; /** @@ -1008,6 +1015,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) ap->ops = ops; ap->pio_mask = pio_modes; ap->flags |= ATA_FLAG_SLAVE_POSS | iordy; + ap->pflags |= controller->pflags; ap->ioaddr.cmd_addr = io_addr; ap->ioaddr.altstatus_addr = ctrl_addr; ap->ioaddr.ctl_addr = ctrl_addr; @@ -1032,6 +1040,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) return 0; } } + ata_host_detach(host); fail: platform_device_unregister(pdev); return ret; diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c index 0fb6b1b1e634..dd53a66b19e3 100644 --- a/drivers/ata/pata_ninja32.c +++ b/drivers/ata/pata_ninja32.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_ninja32" -#define DRV_VERSION "0.1.3" +#define DRV_VERSION "0.1.5" /** @@ -86,6 +86,7 @@ static struct ata_port_operations ninja32_port_ops = { .sff_dev_select = ninja32_dev_select, .cable_detect = ata_cable_40wire, .set_piomode = ninja32_set_piomode, + .sff_data_xfer = ata_sff_data_xfer32 }; static void ninja32_program(void __iomem *base) @@ -144,6 +145,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id) ap->ioaddr.altstatus_addr = base + 0x1E; ap->ioaddr.bmdma_addr = base; ata_sff_std_ports(&ap->ioaddr); + ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; ninja32_program(base); /* FIXME: Should we disable them at remove ? */ diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index b08e6e0f82b6..45657cacec43 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -62,7 +62,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_via" -#define DRV_VERSION "0.3.3" +#define DRV_VERSION "0.3.4" /* * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx @@ -136,6 +136,9 @@ static const struct via_isa_bridge { { NULL } }; +struct via_port { + u8 cached_device; +}; /* * Cable special cases @@ -346,14 +349,70 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev) */ static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) { - struct ata_taskfile tmp_tf; + struct ata_ioports *ioaddr = &ap->ioaddr; + struct via_port *vp = ap->private_data; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + int newctl = 0; + + if (tf->ctl != ap->last_ctl) { + iowrite8(tf->ctl, ioaddr->ctl_addr); + ap->last_ctl = tf->ctl; + ata_wait_idle(ap); + newctl = 1; + } + + if (tf->flags & ATA_TFLAG_DEVICE) { + iowrite8(tf->device, ioaddr->device_addr); + vp->cached_device = tf->device; + } else if (newctl) + iowrite8(vp->cached_device, ioaddr->device_addr); + + if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { + WARN_ON_ONCE(!ioaddr->ctl_addr); + iowrite8(tf->hob_feature, ioaddr->feature_addr); + iowrite8(tf->hob_nsect, ioaddr->nsect_addr); + iowrite8(tf->hob_lbal, ioaddr->lbal_addr); + iowrite8(tf->hob_lbam, ioaddr->lbam_addr); + iowrite8(tf->hob_lbah, ioaddr->lbah_addr); + VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n", + tf->hob_feature, + tf->hob_nsect, + tf->hob_lbal, + tf->hob_lbam, + tf->hob_lbah); + } - if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) { - tmp_tf = *tf; - tmp_tf.flags |= ATA_TFLAG_DEVICE; - tf = &tmp_tf; + if (is_addr) { + iowrite8(tf->feature, ioaddr->feature_addr); + iowrite8(tf->nsect, ioaddr->nsect_addr); + iowrite8(tf->lbal, ioaddr->lbal_addr); + iowrite8(tf->lbam, ioaddr->lbam_addr); + iowrite8(tf->lbah, ioaddr->lbah_addr); + VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n", + tf->feature, + tf->nsect, + tf->lbal, + tf->lbam, + tf->lbah); } - ata_sff_tf_load(ap, tf); + + ata_wait_idle(ap); +} + +static int via_port_start(struct ata_port *ap) +{ + struct via_port *vp; + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + + int ret = ata_sff_port_start(ap); + if (ret < 0) + return ret; + + vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL); + if (vp == NULL) + return -ENOMEM; + ap->private_data = vp; + return 0; } static struct scsi_host_template via_sht = { @@ -367,6 +426,7 @@ static struct ata_port_operations via_port_ops = { .set_dmamode = via_set_dmamode, .prereset = via_pre_reset, .sff_tf_load = via_tf_load, + .port_start = via_port_start, }; static struct ata_port_operations via_port_ops_noirq = { diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 37ae5dc1070c..870dcfd82357 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1881,6 +1881,39 @@ static u8 mv_bmdma_status(struct ata_port *ap) return status; } +static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc) +{ + struct ata_taskfile *tf = &qc->tf; + /* + * Workaround for 88SX60x1 FEr SATA#24. + * + * Chip may corrupt WRITEs if multi_count >= 4kB. + * Note that READs are unaffected. + * + * It's not clear if this errata really means "4K bytes", + * or if it always happens for multi_count > 7 + * regardless of device sector_size. + * + * So, for safety, any write with multi_count > 7 + * gets converted here into a regular PIO write instead: + */ + if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) { + if (qc->dev->multi_count > 7) { + switch (tf->command) { + case ATA_CMD_WRITE_MULTI: + tf->command = ATA_CMD_PIO_WRITE; + break; + case ATA_CMD_WRITE_MULTI_FUA_EXT: + tf->flags &= ~ATA_TFLAG_FUA; /* ugh */ + /* fall through */ + case ATA_CMD_WRITE_MULTI_EXT: + tf->command = ATA_CMD_PIO_WRITE_EXT; + break; + } + } + } +} + /** * mv_qc_prep - Host specific command preparation. * @qc: queued command to prepare @@ -1898,17 +1931,24 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct mv_port_priv *pp = ap->private_data; __le16 *cw; - struct ata_taskfile *tf; + struct ata_taskfile *tf = &qc->tf; u16 flags = 0; unsigned in_index; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) + switch (tf->protocol) { + case ATA_PROT_DMA: + case ATA_PROT_NCQ: + break; /* continue below */ + case ATA_PROT_PIO: + mv_rw_multi_errata_sata24(qc); + return; + default: return; + } /* Fill in command request block */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + if (!(tf->flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); flags |= qc->tag << CRQB_TAG_SHIFT; @@ -1924,7 +1964,6 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags); cw = &pp->crqb[in_index].ata_cmd[0]; - tf = &qc->tf; /* Sadly, the CRQB cannot accomodate all registers--there are * only 11 bytes...so we must pick and choose required @@ -1990,16 +2029,16 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct mv_port_priv *pp = ap->private_data; struct mv_crqb_iie *crqb; - struct ata_taskfile *tf; + struct ata_taskfile *tf = &qc->tf; unsigned in_index; u32 flags = 0; - if ((qc->tf.protocol != ATA_PROT_DMA) && - (qc->tf.protocol != ATA_PROT_NCQ)) + if ((tf->protocol != ATA_PROT_DMA) && + (tf->protocol != ATA_PROT_NCQ)) return; /* Fill in Gen IIE command request block */ - if (!(qc->tf.flags & ATA_TFLAG_WRITE)) + if (!(tf->flags & ATA_TFLAG_WRITE)) flags |= CRQB_FLAG_READ; WARN_ON(MV_MAX_Q_DEPTH <= qc->tag); @@ -2015,7 +2054,6 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc) crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16); crqb->flags = cpu_to_le32(flags); - tf = &qc->tf; crqb->ata_cmd[0] = cpu_to_le32( (tf->command << 16) | (tf->feature << 24) diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 98e8c50703b3..bdd43c7f432e 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -566,7 +566,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static int printed_version; unsigned int i; int rc; - struct ata_host *host; + struct ata_host *host = NULL; int board_id = (int) ent->driver_data; const unsigned *bar_sizes; |