diff options
Diffstat (limited to 'drivers/char/drm/i915_drv.h')
| -rw-r--r-- | drivers/char/drm/i915_drv.h | 790 |
1 files changed, 789 insertions, 1 deletions
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index f8cc71915c8e..661e2f571195 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -114,6 +114,85 @@ typedef struct drm_i915_private { spinlock_t swaps_lock; drm_i915_vbl_swap_t vbl_swaps; unsigned int swaps_pending; + + /* Register state */ + u8 saveLBB; + u32 saveDSPACNTR; + u32 saveDSPBCNTR; + u32 savePIPEACONF; + u32 savePIPEBCONF; + u32 savePIPEASRC; + u32 savePIPEBSRC; + u32 saveFPA0; + u32 saveFPA1; + u32 saveDPLL_A; + u32 saveDPLL_A_MD; + u32 saveHTOTAL_A; + u32 saveHBLANK_A; + u32 saveHSYNC_A; + u32 saveVTOTAL_A; + u32 saveVBLANK_A; + u32 saveVSYNC_A; + u32 saveBCLRPAT_A; + u32 saveDSPASTRIDE; + u32 saveDSPASIZE; + u32 saveDSPAPOS; + u32 saveDSPABASE; + u32 saveDSPASURF; + u32 saveDSPATILEOFF; + u32 savePFIT_PGM_RATIOS; + u32 saveBLC_PWM_CTL; + u32 saveBLC_PWM_CTL2; + u32 saveFPB0; + u32 saveFPB1; + u32 saveDPLL_B; + u32 saveDPLL_B_MD; + u32 saveHTOTAL_B; + u32 saveHBLANK_B; + u32 saveHSYNC_B; + u32 saveVTOTAL_B; + u32 saveVBLANK_B; + u32 saveVSYNC_B; + u32 saveBCLRPAT_B; + u32 saveDSPBSTRIDE; + u32 saveDSPBSIZE; + u32 saveDSPBPOS; + u32 saveDSPBBASE; + u32 saveDSPBSURF; + u32 saveDSPBTILEOFF; + u32 saveVCLK_DIVISOR_VGA0; + u32 saveVCLK_DIVISOR_VGA1; + u32 saveVCLK_POST_DIV; + u32 saveVGACNTRL; + u32 saveADPA; + u32 saveLVDS; + u32 saveLVDSPP_ON; + u32 saveLVDSPP_OFF; + u32 saveDVOA; + u32 saveDVOB; + u32 saveDVOC; + u32 savePP_ON; + u32 savePP_OFF; + u32 savePP_CONTROL; + u32 savePP_CYCLE; + u32 savePFIT_CONTROL; + u32 save_palette_a[256]; + u32 save_palette_b[256]; + u32 saveFBC_CFB_BASE; + u32 saveFBC_LL_BASE; + u32 saveFBC_CONTROL; + u32 saveFBC_CONTROL2; + u32 saveSWF0[16]; + u32 saveSWF1[16]; + u32 saveSWF2[3]; + u8 saveMSR; + u8 saveSR[8]; + u8 saveGR[24]; + u8 saveAR_INDEX; + u8 saveAR[20]; + u8 saveDACMASK; + u8 saveDACDATA[256*3]; /* 256 3-byte colors */ + u8 saveCR[36]; } drm_i915_private_t; extern struct drm_ioctl_desc i915_ioctls[]; @@ -122,6 +201,7 @@ extern int i915_max_ioctl; /* i915_dma.c */ extern void i915_kernel_lost_context(struct drm_device * dev); extern int i915_driver_load(struct drm_device *, unsigned long flags); +extern int i915_driver_unload(struct drm_device *); extern void i915_driver_lastclose(struct drm_device * dev); extern void i915_driver_preclose(struct drm_device *dev, struct drm_file *file_priv); @@ -200,6 +280,50 @@ extern void i915_mem_release(struct drm_device * dev, extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); +/* Extended config space */ +#define LBB 0xf4 + +/* VGA stuff */ + +#define VGA_ST01_MDA 0x3ba +#define VGA_ST01_CGA 0x3da + +#define VGA_MSR_WRITE 0x3c2 +#define VGA_MSR_READ 0x3cc +#define VGA_MSR_MEM_EN (1<<1) +#define VGA_MSR_CGA_MODE (1<<0) + +#define VGA_SR_INDEX 0x3c4 +#define VGA_SR_DATA 0x3c5 + +#define VGA_AR_INDEX 0x3c0 +#define VGA_AR_VID_EN (1<<5) +#define VGA_AR_DATA_WRITE 0x3c0 +#define VGA_AR_DATA_READ 0x3c1 + +#define VGA_GR_INDEX 0x3ce +#define VGA_GR_DATA 0x3cf +/* GR05 */ +#define VGA_GR_MEM_READ_MODE_SHIFT 3 +#define VGA_GR_MEM_READ_MODE_PLANE 1 +/* GR06 */ +#define VGA_GR_MEM_MODE_MASK 0xc +#define VGA_GR_MEM_MODE_SHIFT 2 +#define VGA_GR_MEM_A0000_AFFFF 0 +#define VGA_GR_MEM_A0000_BFFFF 1 +#define VGA_GR_MEM_B0000_B7FFF 2 +#define VGA_GR_MEM_B0000_BFFFF 3 + +#define VGA_DACMASK 0x3c6 +#define VGA_DACRX 0x3c7 +#define VGA_DACWX 0x3c8 +#define VGA_DACDATA 0x3c9 + +#define VGA_CR_INDEX_MDA 0x3b4 +#define VGA_CR_DATA_MDA 0x3b5 +#define VGA_CR_INDEX_CGA 0x3d4 +#define VGA_CR_DATA_CGA 0x3d5 + #define GFX_OP_USER_INTERRUPT ((0<<29)|(2<<23)) #define GFX_OP_BREAKPOINT_INTERRUPT ((0<<29)|(1<<23)) #define CMD_REPORT_HEAD (7<<23) @@ -215,6 +339,44 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define BB1_UNPROTECTED (0<<0) #define BB2_END_ADDR_MASK (~0x7) +/* Framebuffer compression */ +#define FBC_CFB_BASE 0x03200 /* 4k page aligned */ +#define FBC_LL_BASE 0x03204 /* 4k page aligned */ +#define FBC_CONTROL 0x03208 +#define FBC_CTL_EN (1<<31) +#define FBC_CTL_PERIODIC (1<<30) +#define FBC_CTL_INTERVAL_SHIFT (16) +#define FBC_CTL_UNCOMPRESSIBLE (1<<14) +#define FBC_CTL_STRIDE_SHIFT (5) +#define FBC_CTL_FENCENO (1<<0) +#define FBC_COMMAND 0x0320c +#define FBC_CMD_COMPRESS (1<<0) +#define FBC_STATUS 0x03210 +#define FBC_STAT_COMPRESSING (1<<31) +#define FBC_STAT_COMPRESSED (1<<30) +#define FBC_STAT_MODIFIED (1<<29) +#define FBC_STAT_CURRENT_LINE (1<<0) +#define FBC_CONTROL2 0x03214 +#define FBC_CTL_FENCE_DBL (0<<4) +#define FBC_CTL_IDLE_IMM (0<<2) +#define FBC_CTL_IDLE_FULL (1<<2) +#define FBC_CTL_IDLE_LINE (2<<2) +#define FBC_CTL_IDLE_DEBUG (3<<2) +#define FBC_CTL_CPU_FENCE (1<<1) +#define FBC_CTL_PLANEA (0<<0) +#define FBC_CTL_PLANEB (1<<0) +#define FBC_FENCE_OFF 0x0321b + +#define FBC_LL_SIZE (1536) +#define FBC_LL_PAD (32) + +/* Interrupt bits: + */ +#define USER_INT_FLAG (1<<1) +#define VSYNC_PIPEB_FLAG (1<<5) +#define VSYNC_PIPEA_FLAG (1<<7) +#define HWB_OOM_FLAG (1<<13) /* binner out of memory */ + #define I915REG_HWSTAM 0x02098 #define I915REG_INT_IDENTITY_R 0x020a4 #define I915REG_INT_MASK_R 0x020a8 @@ -251,6 +413,10 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define NOPID 0x2094 #define LP_RING 0x2030 #define HP_RING 0x2040 +/* The binner has its own ring buffer: + */ +#define HWB_RING 0x2400 + #define RING_TAIL 0x00 #define TAIL_ADDR 0x001FFFF8 #define RING_HEAD 0x04 @@ -269,11 +435,105 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define RING_VALID 0x00000001 #define RING_INVALID 0x00000000 +/* Instruction parser error reg: + */ +#define IPEIR 0x2088 + +/* Scratch pad debug 0 reg: + */ +#define SCPD0 0x209c + +/* Error status reg: + */ +#define ESR 0x20b8 + +/* Secondary DMA fetch address debug reg: + */ +#define DMA_FADD_S 0x20d4 + +/* Cache mode 0 reg. + * - Manipulating render cache behaviour is central + * to the concept of zone rendering, tuning this reg can help avoid + * unnecessary render cache reads and even writes (for z/stencil) + * at beginning and end of scene. + * + * - To change a bit, write to this reg with a mask bit set and the + * bit of interest either set or cleared. EG: (BIT<<16) | BIT to set. + */ +#define Cache_Mode_0 0x2120 +#define CM0_MASK_SHIFT 16 +#define CM0_IZ_OPT_DISABLE (1<<6) +#define CM0_ZR_OPT_DISABLE (1<<5) +#define CM0_DEPTH_EVICT_DISABLE (1<<4) +#define CM0_COLOR_EVICT_DISABLE (1<<3) +#define CM0_DEPTH_WRITE_DISABLE (1<<1) +#define CM0_RC_OP_FLUSH_DISABLE (1<<0) + + +/* Graphics flush control. A CPU write flushes the GWB of all writes. + * The data is discarded. + */ +#define GFX_FLSH_CNTL 0x2170 + +/* Binner control. Defines the location of the bin pointer list: + */ +#define BINCTL 0x2420 +#define BC_MASK (1 << 9) + +/* Binned scene info. + */ +#define BINSCENE 0x2428 +#define BS_OP_LOAD (1 << 8) +#define BS_MASK (1 << 22) + +/* Bin command parser debug reg: + */ +#define BCPD 0x2480 + +/* Bin memory control debug reg: + */ +#define BMCD 0x2484 + +/* Bin data cache debug reg: + */ +#define BDCD 0x2488 + +/* Binner pointer cache debug reg: + */ +#define BPCD 0x248c + +/* Binner scratch pad debug reg: + */ +#define BINSKPD 0x24f0 + +/* HWB scratch pad debug reg: + */ +#define HWBSKPD 0x24f4 + +/* Binner memory pool reg: + */ +#define BMP_BUFFER 0x2430 +#define BMP_PAGE_SIZE_4K (0 << 10) +#define BMP_BUFFER_SIZE_SHIFT 1 +#define BMP_ENABLE (1 << 0) + +/* Get/put memory from the binner memory pool: + */ +#define BMP_GET 0x2438 +#define BMP_PUT 0x2440 +#define BMP_OFFSET_SHIFT 5 + +/* 3D state packets: + */ +#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) + #define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) #define SC_UPDATE_SCISSOR (0x1<<1) #define SC_ENABLE_MASK (0x1<<0) #define SC_ENABLE (0x1<<0) +#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) + #define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) #define SCI_YMIN_MASK (0xffff<<16) #define SCI_XMIN_MASK (0xffff<<0) @@ -290,6 +550,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) +#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) #define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) #define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) #define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) @@ -301,6 +562,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define MI_BATCH_NON_SECURE_I965 (1<<8) #define MI_WAIT_FOR_EVENT ((0x3<<23)) +#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) #define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) #define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) @@ -308,9 +570,535 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) #define ASYNC_FLIP (1<<22) +#define DISPLAY_PLANE_A (0<<20) +#define DISPLAY_PLANE_B (1<<20) + +/* Display regs */ +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) + +/* Define the region of interest for the binner: + */ +#define CMD_OP_BIN_CONTROL ((0x3<<29)|(0x1d<<24)|(0x84<<16)|4) #define CMD_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) -#define READ_BREADCRUMB(dev_priv) (((u32 *)(dev_priv->hw_status_page))[5]) +#define CMD_MI_FLUSH (0x04 << 23) +#define MI_NO_WRITE_FLUSH (1 << 2) +#define MI_READ_FLUSH (1 << 0) +#define MI_EXE_FLUSH (1 << 1) +#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ +#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ + +#define BREADCRUMB_BITS 31 +#define BREADCRUMB_MASK ((1U << BREADCRUMB_BITS) - 1) + +#define READ_BREADCRUMB(dev_priv) (((volatile u32*)(dev_priv->hw_status_page))[5]) +#define READ_HWSP(dev_priv, reg) (((volatile u32*)(dev_priv->hw_status_page))[reg]) + +#define BLC_PWM_CTL 0x61254 +#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) + +#define BLC_PWM_CTL2 0x61250 +/** + * This is the most significant 15 bits of the number of backlight cycles in a + * complete cycle of the modulated backlight control. + * + * The actual value is this field multiplied by two. + */ +#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) +#define BLM_LEGACY_MODE (1 << 16) +/** + * This is the number of cycles out of the backlight modulation cycle for which + * the backlight is on. + * + * This field must be no greater than the number of cycles in the complete + * backlight modulation cycle. + */ +#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) +#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) + +#define I915_GCFGC 0xf0 +#define I915_LOW_FREQUENCY_ENABLE (1 << 7) +#define I915_DISPLAY_CLOCK_190_200_MHZ (0 << 4) +#define I915_DISPLAY_CLOCK_333_MHZ (4 << 4) +#define I915_DISPLAY_CLOCK_MASK (7 << 4) + +#define I855_HPLLCC 0xc0 +#define I855_CLOCK_CONTROL_MASK (3 << 0) +#define I855_CLOCK_133_200 (0 << 0) +#define I855_CLOCK_100_200 (1 << 0) +#define I855_CLOCK_100_133 (2 << 0) +#define I855_CLOCK_166_250 (3 << 0) + +/* p317, 319 + */ +#define VCLK2_VCO_M 0x6008 /* treat as 16 bit? (includes msbs) */ +#define VCLK2_VCO_N 0x600a +#define VCLK2_VCO_DIV_SEL 0x6012 + +#define VCLK_DIVISOR_VGA0 0x6000 +#define VCLK_DIVISOR_VGA1 0x6004 +#define VCLK_POST_DIV 0x6010 +/** Selects a post divisor of 4 instead of 2. */ +# define VGA1_PD_P2_DIV_4 (1 << 15) +/** Overrides the p2 post divisor field */ +# define VGA1_PD_P1_DIV_2 (1 << 13) +# define VGA1_PD_P1_SHIFT 8 +/** P1 value is 2 greater than this field */ +# define VGA1_PD_P1_MASK (0x1f << 8) +/** Selects a post divisor of 4 instead of 2. */ +# define VGA0_PD_P2_DIV_4 (1 << 7) +/** Overrides the p2 post divisor field */ +# define VGA0_PD_P1_DIV_2 (1 << 5) +# define VGA0_PD_P1_SHIFT 0 +/** P1 value is 2 greater than this field */ +# define VGA0_PD_P1_MASK (0x1f << 0) + +/* I830 CRTC registers */ +#define HTOTAL_A 0x60000 +#define HBLANK_A 0x60004 +#define HSYNC_A 0x60008 +#define VTOTAL_A 0x6000c +#define VBLANK_A 0x60010 +#define VSYNC_A 0x60014 +#define PIPEASRC 0x6001c +#define BCLRPAT_A 0x60020 +#define VSYNCSHIFT_A 0x60028 + +#define HTOTAL_B 0x61000 +#define HBLANK_B 0x61004 +#define HSYNC_B 0x61008 +#define VTOTAL_B 0x6100c +#define VBLANK_B 0x61010 +#define VSYNC_B 0x61014 +#define PIPEBSRC 0x6101c +#define BCLRPAT_B 0x61020 +#define VSYNCSHIFT_B 0x61028 + +#define PP_STATUS 0x61200 +# define PP_ON (1 << 31) +/** + * Indicates that all dependencies of the panel are on: + * + * - PLL enabled + * - pipe enabled + * - LVDS/DVOB/DVOC on + */ +# define PP_READY (1 << 30) +# define PP_SEQUENCE_NONE (0 << 28) +# define PP_SEQUENCE_ON (1 << 28) +# define PP_SEQUENCE_OFF (2 << 28) +# define PP_SEQUENCE_MASK 0x30000000 +#define PP_CONTROL 0x61204 +# define POWER_TARGET_ON (1 << 0) + +#define LVDSPP_ON 0x61208 +#define LVDSPP_OFF 0x6120c +#define PP_CYCLE 0x61210 + +#define PFIT_CONTROL 0x61230 +# define PFIT_ENABLE (1 << 31) +# define PFIT_PIPE_MASK (3 << 29) +# define PFIT_PIPE_SHIFT 29 +# define VERT_INTERP_DISABLE (0 << 10) +# define VERT_INTERP_BILINEAR (1 << 10) +# define VERT_INTERP_MASK (3 << 10) +# define VERT_AUTO_SCALE (1 << 9) +# define HORIZ_INTERP_DISABLE (0 << 6) +# define HORIZ_INTERP_BILINEAR (1 << 6) +# define HORIZ_INTERP_MASK (3 << 6) +# define HORIZ_AUTO_SCALE (1 << 5) +# define PANEL_8TO6_DITHER_ENABLE (1 << 3) + +#define PFIT_PGM_RATIOS 0x61234 +# define PFIT_VERT_SCALE_MASK 0xfff00000 +# define PFIT_HORIZ_SCALE_MASK 0x0000fff0 + +#define PFIT_AUTO_RATIOS 0x61238 + + +#define DPLL_A 0x06014 +#define DPLL_B 0x06018 +# define DPLL_VCO_ENABLE (1 << 31) +# define DPLL_DVO_HIGH_SPEED (1 << 30) +# define DPLL_SYNCLOCK_ENABLE (1 << 29) +# define DPLL_VGA_MODE_DIS (1 << 28) +# define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ +# define DPLLB_MODE_LVDS (2 << 26) /* i915 */ +# define DPLL_MODE_MASK (3 << 26) +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ +# define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ +# define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ +# define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ +# define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ +/** + * The i830 generation, in DAC/serial mode, defines p1 as two plus this + * bitfield, or just 2 if PLL_P1_DIVIDE_BY_TWO is set. + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 +/** + * The i830 generation, in LVDS mode, defines P1 as the bit number set within + * this field (only one bit may be set). + */ +# define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 +# define DPLL_FPA01_P1_POST_DIV_SHIFT 16 +# define PLL_P2_DIVIDE_BY_4 (1 << 23) /* i830, required in DVO non-gang */ +# define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ +# define PLL_REF_INPUT_DREFCLK (0 << 13) +# define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ +# define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ +# define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) +# define PLL_REF_INPUT_MASK (3 << 13) +# define PLL_LOAD_PULSE_PHASE_SHIFT 9 +/* + * Parallel to Serial Load Pulse phase selection. + * Selects the phase for the 10X DPLL clock for the PCIe + * digital display port. The range is 4 to 13; 10 or more + * is just a flip delay. The default is 6 + */ +# define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) +# define DISPLAY_RATE_SELECT_FPA1 (1 << 8) + +/** + * SDVO multiplier for 945G/GM. Not used on 965. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +# define SDVO_MULTIPLIER_MASK 0x000000ff +# define SDVO_MULTIPLIER_SHIFT_HIRES 4 +# define SDVO_MULTIPLIER_SHIFT_VGA 0 + +/** @defgroup DPLL_MD + * @{ + */ +/** Pipe A SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_A_MD 0x0601c +/** Pipe B SDVO/UDI clock multiplier/divider register for G965. */ +#define DPLL_B_MD 0x06020 +/** + * UDI pixel divider, controlling how many pixels are stuffed into a packet. + * + * Value is pixels minus 1. Must be set to 1 pixel for SDVO. + */ +# define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 +# define DPLL_MD_UDI_DIVIDER_SHIFT 24 +/** UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ +# define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 +# define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 +/** + * SDVO/UDI pixel multiplier. + * + * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus + * clock rate is 10 times the DPLL clock. At low resolution/refresh rate + * modes, the bus rate would be below the limits, so SDVO allows for stuffing + * dummy bytes in the datastream at an increased clock rate, with both sides of + * the link knowing how many bytes are fill. + * + * So, for a mode with a dotclock of 65Mhz, we would want to double the clock + * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be + * set to 130Mhz, and the SDVO multiplier set to 2x in this register and + * through an SDVO command. + * + * This register field has values of multiplication factor minus 1, with + * a maximum multiplier of 5 for SDVO. + */ +# define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 +# define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 +/** SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. + * This best be set to the default value (3) or the CRT won't work. No, + * I don't entirely understand what this does... + */ +# define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f +# define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 +/** @} */ + +#define DPLL_TEST 0x606c +# define DPLLB_TEST_SDVO_DIV_1 (0 << 22) +# define DPLLB_TEST_SDVO_DIV_2 (1 << 22) +# define DPLLB_TEST_SDVO_DIV_4 (2 << 22) +# define DPLLB_TEST_SDVO_DIV_MASK (3 << 22) +# define DPLLB_TEST_N_BYPASS (1 << 19) +# define DPLLB_TEST_M_BYPASS (1 << 18) +# define DPLLB_INPUT_BUFFER_ENABLE (1 << 16) +# define DPLLA_TEST_N_BYPASS (1 << 3) +# define DPLLA_TEST_M_BYPASS (1 << 2) +# define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) + +#define ADPA 0x61100 +#define ADPA_DAC_ENABLE (1<<31) +#define ADPA_DAC_DISABLE 0 +#define ADPA_PIPE_SELECT_MASK (1<<30) +#define ADPA_PIPE_A_SELECT 0 +#define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_USE_VGA_HVPOLARITY (1<<15) +#define ADPA_SETS_HVPOLARITY 0 +#define ADPA_VSYNC_CNTL_DISABLE (1<<11) +#define ADPA_VSYNC_CNTL_ENABLE 0 +#define ADPA_HSYNC_CNTL_DISABLE (1<<10) +#define ADPA_HSYNC_CNTL_ENABLE 0 +#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) +#define ADPA_VSYNC_ACTIVE_LOW 0 +#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) +#define ADPA_HSYNC_ACTIVE_LOW 0 + +#define FPA0 0x06040 +#define FPA1 0x06044 +#define FPB0 0x06048 +#define FPB1 0x0604c +# define FP_N_DIV_MASK 0x003f0000 +# define FP_N_DIV_SHIFT 16 +# define FP_M1_DIV_MASK 0x00003f00 +# define FP_M1_DIV_SHIFT 8 +# define FP_M2_DIV_MASK 0x0000003f +# define FP_M2_DIV_SHIFT 0 + + +#define PORT_HOTPLUG_EN 0x61110 +# define SDVOB_HOTPLUG_INT_EN (1 << 26) +# define SDVOC_HOTPLUG_INT_EN (1 << 25) +# define TV_HOTPLUG_INT_EN (1 << 18) +# define CRT_HOTPLUG_INT_EN (1 << 9) +# define CRT_HOTPLUG_FORCE_DETECT (1 << 3) + +#define PORT_HOTPLUG_STAT 0x61114 +# define CRT_HOTPLUG_INT_STATUS (1 << 11) +# define TV_HOTPLUG_INT_STATUS (1 << 10) +# define CRT_HOTPLUG_MONITOR_MASK (3 << 8) +# define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) +# define CRT_HOTPLUG_MONITOR_MONO (2 << 8) +# define CRT_HOTPLUG_MONITOR_NONE (0 << 8) +# define SDVOC_HOTPLUG_INT_STATUS (1 << 7) +# define SDVOB_HOTPLUG_INT_STATUS (1 << 6) + +#define SDVOB 0x61140 +#define SDVOC 0x61160 +#define SDVO_ENABLE (1 << 31) +#define SDVO_PIPE_B_SELECT (1 << 30) +#define SDVO_STALL_SELECT (1 << 29) +#define SDVO_INTERRUPT_ENABLE (1 << 26) +/** + * 915G/GM SDVO pixel multiplier. + * + * Programmed value is multiplier - 1, up to 5x. + * + * \sa DPLL_MD_UDI_MULTIPLIER_MASK + */ +#define SDVO_PORT_MULTIPLY_MASK (7 << 23) +#define SDVO_PORT_MULTIPLY_SHIFT 23 +#define SDVO_PHASE_SELECT_MASK (15 << 19) +#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) +#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) +#define SDVOC_GANG_MODE (1 << 16) +#define SDVO_BORDER_ENABLE (1 << 7) +#define SDVOB_PCIE_CONCURRENCY (1 << 3) +#define SDVO_DETECTED (1 << 2) +/* Bits to be preserved when writing */ +#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14)) +#define SDVOC_PRESERVE_MASK (1 << 17) + +/** @defgroup LVDS + * @{ + */ +/** + * This register controls the LVDS output enable, pipe selection, and data + * format selection. + * + * All of the clock/data pairs are force powered down by power sequencing. + */ +#define LVDS 0x61180 +/** + * Enables the LVDS port. This bit must be set before DPLLs are enabled, as + * the DPLL semantics change when the LVDS is assigned to that pipe. + */ +# define LVDS_PORT_EN (1 << 31) +/** Selects pipe B for LVDS data. Must be set on pre-965. */ +# define LVDS_PIPEB_SELECT (1 << 30) + +/** + * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per + * pixel. + */ +# define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) +# define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) +# define LVDS_A0A2_CLKA_POWER_UP (3 << 8) +/** + * Controls the A3 data pair, which contains the additional LSBs for 24 bit + * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be + * on. + */ +# define LVDS_A3_POWER_MASK (3 << 6) +# define LVDS_A3_POWER_DOWN (0 << 6) +# define LVDS_A3_POWER_UP (3 << 6) +/** + * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP + * is set. + */ +# define LVDS_CLKB_POWER_MASK (3 << 4) +# define LVDS_CLKB_POWER_DOWN (0 << 4) +# define LVDS_CLKB_POWER_UP (3 << 4) + +/** + * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 + * setting for whether we are in dual-channel mode. The B3 pair will + * additionally only be powered up when LVDS_A3_POWER_UP is set. + */ +# define LVDS_B0B3_POWER_MASK (3 << 2) +# define LVDS_B0B3_POWER_DOWN (0 << 2) +# define LVDS_B0B3_POWER_UP (3 << 2) + +#define PIPEACONF 0x70008 +#define PIPEACONF_ENABLE (1<<31) +#define PIPEACONF_DISABLE 0 +#define PIPEACONF_DOUBLE_WIDE (1<<30) +#define I965_PIPECONF_ACTIVE (1<<30) +#define PIPEACONF_SINGLE_WIDE 0 +#define PIPEACONF_PIPE_UNLOCKED 0 +#define PIPEACONF_PIPE_LOCKED (1<<25) +#define PIPEACONF_PALETTE 0 +#define PIPEACONF_GAMMA (1<<24) +#define PIPECONF_FORCE_BORDER (1<<25) +#define PIPECONF_PROGRESSIVE (0 << 21) +#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) +#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) + +#define PIPEBCONF 0x71008 +#define PIPEBCONF_ENABLE (1<<31) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_DOUBLE_WIDE (1<<30) +#define PIPEBCONF_DISABLE 0 +#define PIPEBCONF_GAMMA (1<<24) +#define PIPEBCONF_PALETTE 0 + +#define PIPEBGCMAXRED 0x71010 +#define PIPEBGCMAXGREEN 0x71014 +#define PIPEBGCMAXBLUE 0x71018 +#define PIPEBSTAT 0x71024 +#define PIPEBFRAMEHIGH 0x71040 +#define PIPEBFRAMEPIXEL 0x71044 + +#define DSPACNTR 0x70180 +#define DSPBCNTR 0x71180 +#define DISPLAY_PLANE_ENABLE (1<<31) +#define DISPLAY_PLANE_DISABLE 0 +#define DISPPLANE_GAMMA_ENABLE (1<<30) +#define DISPPLANE_GAMMA_DISABLE 0 +#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) +#define DISPPLANE_8BPP (0x2<<26) +#define DISPPLANE_15_16BPP (0x4<<26) +#define DISPPLANE_16BPP (0x5<<26) +#define DISPPLANE_32BPP_NO_ALPHA (0x6<<26) +#define DISPPLANE_32BPP (0x7<<26) +#define DISPPLANE_STEREO_ENABLE (1<<25) +#define DISPPLANE_STEREO_DISABLE 0 +#define DISPPLANE_SEL_PIPE_MASK (1<<24) +#define DISPPLANE_SEL_PIPE_A 0 +#define DISPPLANE_SEL_PIPE_B (1<<24) +#define DISPPLANE_SRC_KEY_ENABLE (1<<22) +#define DISPPLANE_SRC_KEY_DISABLE 0 +#define DISPPLANE_LINE_DOUBLE (1<<20) +#define DISPPLANE_NO_LINE_DOUBLE 0 +#define DISPPLANE_STEREO_POLARITY_FIRST 0 +#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) +/* plane B only */ +#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) +#define DISPPLANE_ALPHA_TRANS_DISABLE 0 +#define DISPPLANE_SPRITE_ABOVE_DISPLAYA 0 +#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) + +#define DSPABASE 0x70184 +#define DSPASTRIDE 0x70188 + +#define DSPBBASE 0x71184 +#define DSPBADDR DSPBBASE +#define DSPBSTRIDE 0x71188 + +#define DSPAKEYVAL 0x70194 +#define DSPAKEYMASK 0x70198 + +#define DSPAPOS 0x7018C /* reserved */ +#define DSPASIZE 0x70190 +#define DSPBPOS 0x7118C +#define DSPBSIZE 0x71190 + +#define DSPASURF 0x7019C +#define DSPATILEOFF 0x701A4 + +#define DSPBSURF 0x7119C +#define DSPBTILEOFF 0x711A4 + +#define VGACNTRL 0x71400 +# define VGA_DISP_DISABLE (1 << 31) +# define VGA_2X_MODE (1 << 30) +# define VGA_PIPE_B_SELECT (1 << 29) + +/* + * Some BIOS scratch area registers. The 845 (and 830?) store the amount + * of video memory available to the BIOS in SWF1. + */ + +#define SWF0 0x71410 + +/* + * 855 scratch registers. + */ +#define SWF10 0x70410 + +#define SWF30 0x72414 + +/* + * Overlay registers. These are overlay registers accessed via MMIO. + * Those loaded via the overlay register page are defined in i830_video.c. + */ +#define OVADD 0x30000 + +#define DOVSTA 0x30008 +#define OC_BUF (0x3<<20) + +#define OGAMC5 0x30010 +#define OGAMC4 0x30014 +#define OGAMC3 0x30018 +#define OGAMC2 0x3001c +#define OGAMC1 0x30020 +#define OGAMC0 0x30024 +/* + * Palette registers + */ +#define PALETTE_A 0x0a000 +#define PALETTE_B 0x0a800 + +#define IS_I830(dev) ((dev)->pci_device == 0x3577) +#define IS_845G(dev) ((dev)->pci_device == 0x2562) +#define IS_I85X(dev) ((dev)->pci_device == 0x3582) +#define IS_I855(dev) ((dev)->pci_device == 0x3582) +#define IS_I865G(dev) ((dev)->pci_device == 0x2572) + +#define IS_I915G(dev) (dev->pci_device == 0x2582)/* || dev->pci_device == PCI_DEVICE_ID_INTELPCI_CHIP_E7221_G)*/ +#define IS_I915GM(dev) ((dev)->pci_device == 0x2592) +#define IS_I945G(dev) ((dev)->pci_device == 0x2772) +#define IS_I945GM(dev) ((dev)->pci_device == 0x27A2) + +#define IS_I965G(dev) ((dev)->pci_device == 0x2972 || \ + (dev)->pci_device == 0x2982 || \ + (dev)->pci_device == 0x2992 || \ + (dev)->pci_device == 0x29A2 || \ + (dev)->pci_device == 0x2A02 || \ + (dev)->pci_device == 0x2A12) + +#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) + +#define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ + (dev)->pci_device == 0x29B2 || \ + (dev)->pci_device == 0x29D2) + +#define IS_I9XX(dev) (IS_I915G(dev) || IS_I915GM(dev) || IS_I945G(dev) || \ + IS_I945GM(dev) || IS_I965G(dev) || IS_G33(dev)) + +#define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ + IS_I945GM(dev) || IS_I965GM(dev)) + +#define PRIMARY_RINGBUFFER_SIZE (128*1024) #endif |