diff options
Diffstat (limited to 'drivers/char/dtlk.c')
| -rw-r--r-- | drivers/char/dtlk.c | 659 |
1 files changed, 659 insertions, 0 deletions
diff --git a/drivers/char/dtlk.c b/drivers/char/dtlk.c new file mode 100644 index 000000000000..903e4c3cc209 --- /dev/null +++ b/drivers/char/dtlk.c @@ -0,0 +1,659 @@ +/* -*- linux-c -*- + * dtlk.c - DoubleTalk PC driver for Linux + * + * Original author: Chris Pallotta <chris@allmedia.com> + * Current maintainer: Jim Van Zandt <jrv@vanzandt.mv.com> + * + * 2000-03-18 Jim Van Zandt: Fix polling. + * Eliminate dtlk_timer_active flag and separate dtlk_stop_timer + * function. Don't restart timer in dtlk_timer_tick. Restart timer + * in dtlk_poll after every poll. dtlk_poll returns mask (duh). + * Eliminate unused function dtlk_write_byte. Misc. code cleanups. + */ + +/* This driver is for the DoubleTalk PC, a speech synthesizer + manufactured by RC Systems (http://www.rcsys.com/). It was written + based on documentation in their User's Manual file and Developer's + Tools disk. + + The DoubleTalk PC contains four voice synthesizers: text-to-speech + (TTS), linear predictive coding (LPC), PCM/ADPCM, and CVSD. It + also has a tone generator. Output data for LPC are written to the + LPC port, and output data for the other modes are written to the + TTS port. + + Two kinds of data can be read from the DoubleTalk: status + information (in response to the "\001?" interrogation command) is + read from the TTS port, and index markers (which mark the progress + of the speech) are read from the LPC port. Not all models of the + DoubleTalk PC implement index markers. Both the TTS and LPC ports + can also display status flags. + + The DoubleTalk PC generates no interrupts. + + These characteristics are mapped into the Unix stream I/O model as + follows: + + "write" sends bytes to the TTS port. It is the responsibility of + the user program to switch modes among TTS, PCM/ADPCM, and CVSD. + This driver was written for use with the text-to-speech + synthesizer. If LPC output is needed some day, other minor device + numbers can be used to select among output modes. + + "read" gets index markers from the LPC port. If the device does + not implement index markers, the read will fail with error EINVAL. + + Status information is available using the DTLK_INTERROGATE ioctl. + + */ + +#include <linux/module.h> + +#define KERNEL +#include <linux/types.h> +#include <linux/fs.h> +#include <linux/mm.h> /* for verify_area */ +#include <linux/errno.h> /* for -EBUSY */ +#include <linux/ioport.h> /* for request_region */ +#include <linux/delay.h> /* for loops_per_jiffy */ +#include <asm/io.h> /* for inb_p, outb_p, inb, outb, etc. */ +#include <asm/uaccess.h> /* for get_user, etc. */ +#include <linux/wait.h> /* for wait_queue */ +#include <linux/init.h> /* for __init, module_{init,exit} */ +#include <linux/poll.h> /* for POLLIN, etc. */ +#include <linux/dtlk.h> /* local header file for DoubleTalk values */ +#include <linux/devfs_fs_kernel.h> +#include <linux/smp_lock.h> + +#ifdef TRACING +#define TRACE_TEXT(str) printk(str); +#define TRACE_RET printk(")") +#else /* !TRACING */ +#define TRACE_TEXT(str) ((void) 0) +#define TRACE_RET ((void) 0) +#endif /* TRACING */ + + +static int dtlk_major; +static int dtlk_port_lpc; +static int dtlk_port_tts; +static int dtlk_busy; +static int dtlk_has_indexing; +static unsigned int dtlk_portlist[] = +{0x25e, 0x29e, 0x2de, 0x31e, 0x35e, 0x39e, 0}; +static wait_queue_head_t dtlk_process_list; +static struct timer_list dtlk_timer; + +/* prototypes for file_operations struct */ +static ssize_t dtlk_read(struct file *, char __user *, + size_t nbytes, loff_t * ppos); +static ssize_t dtlk_write(struct file *, const char __user *, + size_t nbytes, loff_t * ppos); +static unsigned int dtlk_poll(struct file *, poll_table *); +static int dtlk_open(struct inode *, struct file *); +static int dtlk_release(struct inode *, struct file *); +static int dtlk_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); + +static struct file_operations dtlk_fops = +{ + .owner = THIS_MODULE, + .read = dtlk_read, + .write = dtlk_write, + .poll = dtlk_poll, + .ioctl = dtlk_ioctl, + .open = dtlk_open, + .release = dtlk_release, +}; + +/* local prototypes */ +static int dtlk_dev_probe(void); +static struct dtlk_settings *dtlk_interrogate(void); +static int dtlk_readable(void); +static char dtlk_read_lpc(void); +static char dtlk_read_tts(void); +static int dtlk_writeable(void); +static char dtlk_write_bytes(const char *buf, int n); +static char dtlk_write_tts(char); +/* + static void dtlk_handle_error(char, char, unsigned int); + */ +static void dtlk_timer_tick(unsigned long data); + +static ssize_t dtlk_read(struct file *file, char __user *buf, + size_t count, loff_t * ppos) +{ + unsigned int minor = iminor(file->f_dentry->d_inode); + char ch; + int i = 0, retries; + + TRACE_TEXT("(dtlk_read"); + /* printk("DoubleTalk PC - dtlk_read()\n"); */ + + if (minor != DTLK_MINOR || !dtlk_has_indexing) + return -EINVAL; + + for (retries = 0; retries < loops_per_jiffy; retries++) { + while (i < count && dtlk_readable()) { + ch = dtlk_read_lpc(); + /* printk("dtlk_read() reads 0x%02x\n", ch); */ + if (put_user(ch, buf++)) + return -EFAULT; + i++; + } + if (i) + return i; + if (file->f_flags & O_NONBLOCK) + break; + msleep_interruptible(100); + } + if (retries == loops_per_jiffy) + printk(KERN_ERR "dtlk_read times out\n"); + TRACE_RET; + return -EAGAIN; +} + +static ssize_t dtlk_write(struct file *file, const char __user *buf, + size_t count, loff_t * ppos) +{ + int i = 0, retries = 0, ch; + + TRACE_TEXT("(dtlk_write"); +#ifdef TRACING + printk(" \""); + { + int i, ch; + for (i = 0; i < count; i++) { + if (get_user(ch, buf + i)) + return -EFAULT; + if (' ' <= ch && ch <= '~') + printk("%c", ch); + else + printk("\\%03o", ch); + } + printk("\""); + } +#endif + + if (iminor(file->f_dentry->d_inode) != DTLK_MINOR) + return -EINVAL; + + while (1) { + while (i < count && !get_user(ch, buf) && + (ch == DTLK_CLEAR || dtlk_writeable())) { + dtlk_write_tts(ch); + buf++; + i++; + if (i % 5 == 0) + /* We yield our time until scheduled + again. This reduces the transfer + rate to 500 bytes/sec, but that's + still enough to keep up with the + speech synthesizer. */ + msleep_interruptible(1); + else { + /* the RDY bit goes zero 2-3 usec + after writing, and goes 1 again + 180-190 usec later. Here, we wait + up to 250 usec for the RDY bit to + go nonzero. */ + for (retries = 0; + retries < loops_per_jiffy / (4000/HZ); + retries++) + if (inb_p(dtlk_port_tts) & + TTS_WRITABLE) + break; + } + retries = 0; + } + if (i == count) + return i; + if (file->f_flags & O_NONBLOCK) + break; + + msleep_interruptible(1); + + if (++retries > 10 * HZ) { /* wait no more than 10 sec + from last write */ + printk("dtlk: write timeout. " + "inb_p(dtlk_port_tts) = 0x%02x\n", + inb_p(dtlk_port_tts)); + TRACE_RET; + return -EBUSY; + } + } + TRACE_RET; + return -EAGAIN; +} + +static unsigned int dtlk_poll(struct file *file, poll_table * wait) +{ + int mask = 0; + unsigned long expires; + + TRACE_TEXT(" dtlk_poll"); + /* + static long int j; + printk("."); + printk("<%ld>", jiffies-j); + j=jiffies; + */ + poll_wait(file, &dtlk_process_list, wait); + + if (dtlk_has_indexing && dtlk_readable()) { + del_timer(&dtlk_timer); + mask = POLLIN | POLLRDNORM; + } + if (dtlk_writeable()) { + del_timer(&dtlk_timer); + mask |= POLLOUT | POLLWRNORM; + } + /* there are no exception conditions */ + + /* There won't be any interrupts, so we set a timer instead. */ + expires = jiffies + 3*HZ / 100; + mod_timer(&dtlk_timer, expires); + + return mask; +} + +static void dtlk_timer_tick(unsigned long data) +{ + TRACE_TEXT(" dtlk_timer_tick"); + wake_up_interruptible(&dtlk_process_list); +} + +static int dtlk_ioctl(struct inode *inode, + struct file *file, + unsigned int cmd, + unsigned long arg) +{ + char __user *argp = (char __user *)arg; + struct dtlk_settings *sp; + char portval; + TRACE_TEXT(" dtlk_ioctl"); + + switch (cmd) { + + case DTLK_INTERROGATE: + sp = dtlk_interrogate(); + if (copy_to_user(argp, sp, sizeof(struct dtlk_settings))) + return -EINVAL; + return 0; + + case DTLK_STATUS: + portval = inb_p(dtlk_port_tts); + return put_user(portval, argp); + + default: + return -EINVAL; + } +} + +static int dtlk_open(struct inode *inode, struct file *file) +{ + TRACE_TEXT("(dtlk_open"); + + nonseekable_open(inode, file); + switch (iminor(inode)) { + case DTLK_MINOR: + if (dtlk_busy) + return -EBUSY; + return nonseekable_open(inode, file); + + default: + return -ENXIO; + } +} + +static int dtlk_release(struct inode *inode, struct file *file) +{ + TRACE_TEXT("(dtlk_release"); + + switch (iminor(inode)) { + case DTLK_MINOR: + break; + + default: + break; + } + TRACE_RET; + + del_timer(&dtlk_timer); + + return 0; +} + +static int __init dtlk_init(void) +{ + dtlk_port_lpc = 0; + dtlk_port_tts = 0; + dtlk_busy = 0; + dtlk_major = register_chrdev(0, "dtlk", &dtlk_fops); + if (dtlk_major == 0) { + printk(KERN_ERR "DoubleTalk PC - cannot register device\n"); + return 0; + } + if (dtlk_dev_probe() == 0) + printk(", MAJOR %d\n", dtlk_major); + + devfs_mk_cdev(MKDEV(dtlk_major, DTLK_MINOR), + S_IFCHR | S_IRUSR | S_IWUSR, "dtlk"); + + init_timer(&dtlk_timer); + dtlk_timer.function = dtlk_timer_tick; + init_waitqueue_head(&dtlk_process_list); + + return 0; +} + +static void __exit dtlk_cleanup (void) +{ + dtlk_write_bytes("goodbye", 8); + msleep_interruptible(500); /* nap 0.50 sec but + could be awakened + earlier by + signals... */ + + dtlk_write_tts(DTLK_CLEAR); + unregister_chrdev(dtlk_major, "dtlk"); + devfs_remove("dtlk"); + release_region(dtlk_port_lpc, DTLK_IO_EXTENT); +} + +module_init(dtlk_init); +module_exit(dtlk_cleanup); + +/* ------------------------------------------------------------------------ */ + +static int dtlk_readable(void) +{ +#ifdef TRACING + printk(" dtlk_readable=%u@%u", inb_p(dtlk_port_lpc) != 0x7f, jiffies); +#endif + return inb_p(dtlk_port_lpc) != 0x7f; +} + +static int dtlk_writeable(void) +{ + /* TRACE_TEXT(" dtlk_writeable"); */ +#ifdef TRACINGMORE + printk(" dtlk_writeable=%u", (inb_p(dtlk_port_tts) & TTS_WRITABLE)!=0); +#endif + return inb_p(dtlk_port_tts) & TTS_WRITABLE; +} + +static int __init dtlk_dev_probe(void) +{ + unsigned int testval = 0; + int i = 0; + struct dtlk_settings *sp; + + if (dtlk_port_lpc | dtlk_port_tts) + return -EBUSY; + + for (i = 0; dtlk_portlist[i]; i++) { +#if 0 + printk("DoubleTalk PC - Port %03x = %04x\n", + dtlk_portlist[i], (testval = inw_p(dtlk_portlist[i]))); +#endif + + if (!request_region(dtlk_portlist[i], DTLK_IO_EXTENT, + "dtlk")) + continue; + testval = inw_p(dtlk_portlist[i]); + if ((testval &= 0xfbff) == 0x107f) { + dtlk_port_lpc = dtlk_portlist[i]; + dtlk_port_tts = dtlk_port_lpc + 1; + + sp = dtlk_interrogate(); + printk("DoubleTalk PC at %03x-%03x, " + "ROM version %s, serial number %u", + dtlk_portlist[i], dtlk_portlist[i] + + DTLK_IO_EXTENT - 1, + sp->rom_version, sp->serial_number); + + /* put LPC port into known state, so + dtlk_readable() gives valid result */ + outb_p(0xff, dtlk_port_lpc); + + /* INIT string and index marker */ + dtlk_write_bytes("\036\1@\0\0012I\r", 8); + /* posting an index takes 18 msec. Here, we + wait up to 100 msec to see whether it + appears. */ + msleep_interruptible(100); + dtlk_has_indexing = dtlk_readable(); +#ifdef TRACING + printk(", indexing %d\n", dtlk_has_indexing); +#endif +#ifdef INSCOPE + { +/* This macro records ten samples read from the LPC port, for later display */ +#define LOOK \ +for (i = 0; i < 10; i++) \ + { \ + buffer[b++] = inb_p(dtlk_port_lpc); \ + __delay(loops_per_jiffy/(1000000/HZ)); \ + } + char buffer[1000]; + int b = 0, i, j; + + LOOK + outb_p(0xff, dtlk_port_lpc); + buffer[b++] = 0; + LOOK + dtlk_write_bytes("\0012I\r", 4); + buffer[b++] = 0; + __delay(50 * loops_per_jiffy / (1000/HZ)); + outb_p(0xff, dtlk_port_lpc); + buffer[b++] = 0; + LOOK + + printk("\n"); + for (j = 0; j < b; j++) + printk(" %02x", buffer[j]); + printk("\n"); + } +#endif /* INSCOPE */ + +#ifdef OUTSCOPE + { +/* This macro records ten samples read from the TTS port, for later display */ +#define LOOK \ +for (i = 0; i < 10; i++) \ + { \ + buffer[b++] = inb_p(dtlk_port_tts); \ + __delay(loops_per_jiffy/(1000000/HZ)); /* 1 us */ \ + } + char buffer[1000]; + int b = 0, i, j; + + mdelay(10); /* 10 ms */ + LOOK + outb_p(0x03, dtlk_port_tts); + buffer[b++] = 0; + LOOK + LOOK + + printk("\n"); + for (j = 0; j < b; j++) + printk(" %02x", buffer[j]); + printk("\n"); + } +#endif /* OUTSCOPE */ + + dtlk_write_bytes("Double Talk found", 18); + + return 0; + } + release_region(dtlk_portlist[i], DTLK_IO_EXTENT); + } + + printk(KERN_INFO "\nDoubleTalk PC - not found\n"); + return -ENODEV; +} + +/* + static void dtlk_handle_error(char op, char rc, unsigned int minor) + { + printk(KERN_INFO"\nDoubleTalk PC - MINOR: %d, OPCODE: %d, ERROR: %d\n", + minor, op, rc); + return; + } + */ + +/* interrogate the DoubleTalk PC and return its settings */ +static struct dtlk_settings *dtlk_interrogate(void) +{ + unsigned char *t; + static char buf[sizeof(struct dtlk_settings) + 1]; + int total, i; + static struct dtlk_settings status; + TRACE_TEXT("(dtlk_interrogate"); + dtlk_write_bytes("\030\001?", 3); + for (total = 0, i = 0; i < 50; i++) { + buf[total] = dtlk_read_tts(); + if (total > 2 && buf[total] == 0x7f) + break; + if (total < sizeof(struct dtlk_settings)) + total++; + } + /* + if (i==50) printk("interrogate() read overrun\n"); + for (i=0; i<sizeof(buf); i++) + printk(" %02x", buf[i]); + printk("\n"); + */ + t = buf; + status.serial_number = t[0] + t[1] * 256; /* serial number is + little endian */ + t += 2; + + i = 0; + while (*t != '\r') { + status.rom_version[i] = *t; + if (i < sizeof(status.rom_version) - 1) + i++; + t++; + } + status.rom_version[i] = 0; + t++; + + status.mode = *t++; + status.punc_level = *t++; + status.formant_freq = *t++; + status.pitch = *t++; + status.speed = *t++; + status.volume = *t++; + status.tone = *t++; + status.expression = *t++; + status.ext_dict_loaded = *t++; + status.ext_dict_status = *t++; + status.free_ram = *t++; + status.articulation = *t++; + status.reverb = *t++; + status.eob = *t++; + status.has_indexing = dtlk_has_indexing; + TRACE_RET; + return &status; +} + +static char dtlk_read_tts(void) +{ + int portval, retries = 0; + char ch; + TRACE_TEXT("(dtlk_read_tts"); + + /* verify DT is ready, read char, wait for ACK */ + do { + portval = inb_p(dtlk_port_tts); + } while ((portval & TTS_READABLE) == 0 && + retries++ < DTLK_MAX_RETRIES); + if (retries == DTLK_MAX_RETRIES) + printk(KERN_ERR "dtlk_read_tts() timeout\n"); + + ch = inb_p(dtlk_port_tts); /* input from TTS port */ + ch &= 0x7f; + outb_p(ch, dtlk_port_tts); + + retries = 0; + do { + portval = inb_p(dtlk_port_tts); + } while ((portval & TTS_READABLE) != 0 && + retries++ < DTLK_MAX_RETRIES); + if (retries == DTLK_MAX_RETRIES) + printk(KERN_ERR "dtlk_read_tts() timeout\n"); + + TRACE_RET; + return ch; +} + +static char dtlk_read_lpc(void) +{ + int retries = 0; + char ch; + TRACE_TEXT("(dtlk_read_lpc"); + + /* no need to test -- this is only called when the port is readable */ + + ch = inb_p(dtlk_port_lpc); /* input from LPC port */ + + outb_p(0xff, dtlk_port_lpc); + + /* acknowledging a read takes 3-4 + usec. Here, we wait up to 20 usec + for the acknowledgement */ + retries = (loops_per_jiffy * 20) / (1000000/HZ); + while (inb_p(dtlk_port_lpc) != 0x7f && --retries > 0); + if (retries == 0) + printk(KERN_ERR "dtlk_read_lpc() timeout\n"); + + TRACE_RET; + return ch; +} + +/* write n bytes to tts port */ +static char dtlk_write_bytes(const char *buf, int n) +{ + char val = 0; + /* printk("dtlk_write_bytes(\"%-*s\", %d)\n", n, buf, n); */ + TRACE_TEXT("(dtlk_write_bytes"); + while (n-- > 0) + val = dtlk_write_tts(*buf++); + TRACE_RET; + return val; +} + +static char dtlk_write_tts(char ch) +{ + int retries = 0; +#ifdef TRACINGMORE + printk(" dtlk_write_tts("); + if (' ' <= ch && ch <= '~') + printk("'%c'", ch); + else + printk("0x%02x", ch); +#endif + if (ch != DTLK_CLEAR) /* no flow control for CLEAR command */ + while ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0 && + retries++ < DTLK_MAX_RETRIES) /* DT ready? */ + ; + if (retries == DTLK_MAX_RETRIES) + printk(KERN_ERR "dtlk_write_tts() timeout\n"); + + outb_p(ch, dtlk_port_tts); /* output to TTS port */ + /* the RDY bit goes zero 2-3 usec after writing, and goes + 1 again 180-190 usec later. Here, we wait up to 10 + usec for the RDY bit to go zero. */ + for (retries = 0; retries < loops_per_jiffy / (100000/HZ); retries++) + if ((inb_p(dtlk_port_tts) & TTS_WRITABLE) == 0) + break; + +#ifdef TRACINGMORE + printk(")\n"); +#endif + return 0; +} + +MODULE_LICENSE("GPL"); |