diff options
Diffstat (limited to 'drivers/char/ftape/lowlevel')
35 files changed, 10785 insertions, 0 deletions
diff --git a/drivers/char/ftape/lowlevel/Makefile b/drivers/char/ftape/lowlevel/Makefile new file mode 100644 index 000000000000..febab07ba427 --- /dev/null +++ b/drivers/char/ftape/lowlevel/Makefile @@ -0,0 +1,43 @@ +# +# Copyright (C) 1996, 1997 Clau-Justus Heine. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; see the file COPYING. If not, write to +# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. +# +# $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/Makefile,v $ +# $Revision: 1.4 $ +# $Date: 1997/10/07 09:26:02 $ +# +# Makefile for the lowlevel part QIC-40/80/3010/3020 floppy-tape +# driver for Linux. +# + +obj-$(CONFIG_FTAPE) += ftape.o + +ftape-objs := ftape-init.o fdc-io.o fdc-isr.o \ + ftape-bsm.o ftape-ctl.o ftape-read.o ftape-rw.o \ + ftape-write.o ftape-io.o ftape-calibr.o ftape-ecc.o fc-10.o \ + ftape-buffer.o ftape-format.o ftape_syms.o + +ifeq ($(CONFIG_FTAPE),y) +ftape-objs += ftape-setup.o +endif + +ifndef CONFIG_FT_NO_TRACE_AT_ALL +ftape-objs += ftape-tracing.o +endif + +ifeq ($(CONFIG_FT_PROC_FS),y) +ftape-objs += ftape-proc.o +endif diff --git a/drivers/char/ftape/lowlevel/fc-10.c b/drivers/char/ftape/lowlevel/fc-10.c new file mode 100644 index 000000000000..9bc1cddade76 --- /dev/null +++ b/drivers/char/ftape/lowlevel/fc-10.c @@ -0,0 +1,175 @@ +/* + * + + Copyright (C) 1993,1994 Jon Tombs. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + The entire guts of this program was written by dosemu, modified to + record reads and writes to the ports in the 0x180-0x188 address space, + while running the CMS program TAPE.EXE V2.0.5 supplied with the drive. + + Modified to use an array of addresses and generally cleaned up (made + much shorter) 4 June 94, dosemu isn't that good at writing short code it + would seem :-). Made independent of 0x180, but I doubt it will work + at any other address. + + Modified for distribution with ftape source. 21 June 94, SJL. + + Modifications on 20 October 95, by Daniel Cohen (catman@wpi.edu): + Modified to support different DMA, IRQ, and IO Ports. Borland's + Turbo Debugger in virtual 8086 mode (TD386.EXE with hardware breakpoints + provided by the TDH386.SYS Device Driver) was used on the CMS program + TAPE V4.0.5. I set breakpoints on I/O to ports 0x180-0x187. Note that + CMS's program will not successfully configure the tape drive if you set + breakpoints on IO Reads, but you can set them on IO Writes without problems. + Known problems: + - You can not use DMA Channels 5 or 7. + + Modification on 29 January 96, by Daniel Cohen (catman@wpi.edu): + Modified to only accept IRQs 3 - 7, or 9. Since we can only send a 3 bit + number representing the IRQ to the card, special handling is required when + IRQ 9 is selected. IRQ 2 and 9 are the same, and we should request IRQ 9 + from the kernel while telling the card to use IRQ 2. Thanks to Greg + Crider (gcrider@iclnet.org) for finding and locating this bug, as well as + testing the patch. + + Modification on 11 December 96, by Claus Heine (claus@momo.math.rwth-aachen.de): + Modified a little to use variahle ft_fdc_base, ft_fdc_irq, ft_fdc_dma + instead of preprocessor symbols. Thus we can compile this into the module + or kernel and let the user specify the options as command line arguments. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fc-10.c,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:04 $ + * + * This file contains code for the CMS FC-10/FC-20 card. + */ + +#include <asm/io.h> +#include <linux/ftape.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/fdc-io.h" +#include "../lowlevel/fc-10.h" + +static __u16 inbs_magic[] = { + 0x3, 0x3, 0x0, 0x4, 0x7, 0x2, 0x5, 0x3, 0x1, 0x4, + 0x3, 0x5, 0x2, 0x0, 0x3, 0x7, 0x4, 0x2, + 0x0, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7 +}; + +static __u16 fc10_ports[] = { + 0x180, 0x210, 0x2A0, 0x300, 0x330, 0x340, 0x370 +}; + +int fc10_enable(void) +{ + int i; + __u8 cardConfig = 0x00; + __u8 x; + TRACE_FUN(ft_t_flow); + +/* This code will only work if the FC-10 (or FC-20) is set to + * use DMA channels 1, 2, or 3. DMA channels 5 and 7 seem to be + * initialized by the same command as channels 1 and 3, respectively. + */ + if (ft_fdc_dma > 3) { + TRACE_ABORT(0, ft_t_err, +"Error: The FC-10/20 must be set to use DMA channels 1, 2, or 3!"); + } +/* Only allow the FC-10/20 to use IRQ 3-7, or 9. Note that CMS's program + * only accepts IRQ's 2-7, but in linux, IRQ 2 is the same as IRQ 9. + */ + if (ft_fdc_irq < 3 || ft_fdc_irq == 8 || ft_fdc_irq > 9) { + TRACE_ABORT(0, ft_t_err, +"Error: The FC-10/20 must be set to use IRQ levels 3 - 7, or 9!\n" +KERN_INFO "Note: IRQ 9 is the same as IRQ 2"); + } + /* Clear state machine ??? + */ + for (i = 0; i < NR_ITEMS(inbs_magic); i++) { + inb(ft_fdc_base + inbs_magic[i]); + } + outb(0x0, ft_fdc_base); + + x = inb(ft_fdc_base); + if (x == 0x13 || x == 0x93) { + for (i = 1; i < 8; i++) { + if (inb(ft_fdc_base + i) != x) { + TRACE_EXIT 0; + } + } + } else { + TRACE_EXIT 0; + } + + outb(0x8, ft_fdc_base); + + for (i = 0; i < 8; i++) { + if (inb(ft_fdc_base + i) != 0x0) { + TRACE_EXIT 0; + } + } + outb(0x10, ft_fdc_base); + + for (i = 0; i < 8; i++) { + if (inb(ft_fdc_base + i) != 0xff) { + TRACE_EXIT 0; + } + } + + /* Okay, we found a FC-10 card ! ??? + */ + outb(0x0, fdc.ccr); + + /* Clear state machine again ??? + */ + for (i = 0; i < NR_ITEMS(inbs_magic); i++) { + inb(ft_fdc_base + inbs_magic[i]); + } + /* Send io port */ + for (i = 0; i < NR_ITEMS(fc10_ports); i++) + if (ft_fdc_base == fc10_ports[i]) + cardConfig = i + 1; + if (cardConfig == 0) { + TRACE_EXIT 0; /* Invalid I/O Port */ + } + /* and IRQ - If using IRQ 9, tell the FC card it is actually IRQ 2 */ + if (ft_fdc_irq != 9) + cardConfig |= ft_fdc_irq << 3; + else + cardConfig |= 2 << 3; + + /* and finally DMA Channel */ + cardConfig |= ft_fdc_dma << 6; + outb(cardConfig, ft_fdc_base); /* DMA [2 bits]/IRQ [3 bits]/BASE [3 bits] */ + + /* Enable FC-10 ??? + */ + outb(0, fdc.ccr); + outb(0, fdc.dor2); + outb(FDC_DMA_MODE /* 8 */, fdc.dor); + outb(FDC_DMA_MODE /* 8 */, fdc.dor); + outb(1, fdc.dor2); + + /************************************* + * + * cH: why the hell should this be necessary? This is done + * by fdc_reset()!!! + * + *************************************/ + /* Initialize fdc, select drive B: + */ + outb(FDC_DMA_MODE, fdc.dor); /* assert reset, dma & irq enabled */ + /* 0x08 */ + outb(FDC_DMA_MODE|FDC_RESET_NOT, fdc.dor); /* release reset */ + /* 0x08 | 0x04 = 0x0c */ + outb(FDC_DMA_MODE|FDC_RESET_NOT|FDC_MOTOR_1|FTAPE_SEL_B, fdc.dor); + /* 0x08 | 0x04 | 0x20 | 0x01 = 0x2d */ + /* select drive 1 */ /* why not drive 0 ???? */ + TRACE_EXIT (x == 0x93) ? 2 : 1; +} diff --git a/drivers/char/ftape/lowlevel/fc-10.h b/drivers/char/ftape/lowlevel/fc-10.h new file mode 100644 index 000000000000..da7b88bca889 --- /dev/null +++ b/drivers/char/ftape/lowlevel/fc-10.h @@ -0,0 +1,39 @@ +#ifndef _FC_10_H +#define _FC_10_H + +/* + * Copyright (C) 1994-1996 Bas Laarhoven. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fc-10.h,v $ + * $Revision: 1.1 $ + * $Date: 1997/09/19 09:05:22 $ + * + * This file contains definitions for the FC-10 code + * of the QIC-40/80 floppy-tape driver for Linux. + */ + +/* + * fc-10.c defined global vars. + */ + +/* + * fc-10.c defined global functions. + */ +extern int fc10_enable(void); + +#endif diff --git a/drivers/char/ftape/lowlevel/fdc-io.c b/drivers/char/ftape/lowlevel/fdc-io.c new file mode 100644 index 000000000000..1704a2a57048 --- /dev/null +++ b/drivers/char/ftape/lowlevel/fdc-io.c @@ -0,0 +1,1352 @@ +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-io.c,v $ + * $Revision: 1.7.4.2 $ + * $Date: 1997/11/16 14:48:17 $ + * + * This file contains the low-level floppy disk interface code + * for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for + * Linux. + */ + +#include <linux/config.h> /* for CONFIG_FT_* */ +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <asm/system.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/irq.h> + +#include <linux/ftape.h> +#include <linux/qic117.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/fdc-io.h" +#include "../lowlevel/fdc-isr.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-calibr.h" +#include "../lowlevel/fc-10.h" + +/* Global vars. + */ +static int ftape_motor; +volatile int ftape_current_cylinder = -1; +volatile fdc_mode_enum fdc_mode = fdc_idle; +fdc_config_info fdc; +DECLARE_WAIT_QUEUE_HEAD(ftape_wait_intr); + +unsigned int ft_fdc_base = CONFIG_FT_FDC_BASE; +unsigned int ft_fdc_irq = CONFIG_FT_FDC_IRQ; +unsigned int ft_fdc_dma = CONFIG_FT_FDC_DMA; +unsigned int ft_fdc_threshold = CONFIG_FT_FDC_THR; /* bytes */ +unsigned int ft_fdc_rate_limit = CONFIG_FT_FDC_MAX_RATE; /* bits/sec */ +int ft_probe_fc10 = CONFIG_FT_PROBE_FC10; +int ft_mach2 = CONFIG_FT_MACH2; + +/* Local vars. + */ +static spinlock_t fdc_io_lock; +static unsigned int fdc_calibr_count; +static unsigned int fdc_calibr_time; +static int fdc_status; +volatile __u8 fdc_head; /* FDC head from sector id */ +volatile __u8 fdc_cyl; /* FDC track from sector id */ +volatile __u8 fdc_sect; /* FDC sector from sector id */ +static int fdc_data_rate = 500; /* data rate (Kbps) */ +static int fdc_rate_code; /* data rate code (0 == 500 Kbps) */ +static int fdc_seek_rate = 2; /* step rate (msec) */ +static void (*do_ftape) (void); +static int fdc_fifo_state; /* original fifo setting - fifo enabled */ +static int fdc_fifo_thr; /* original fifo setting - threshold */ +static int fdc_lock_state; /* original lock setting - locked */ +static int fdc_fifo_locked; /* has fifo && lock set ? */ +static __u8 fdc_precomp; /* default precomp. value (nsec) */ +static __u8 fdc_prec_code; /* fdc precomp. select code */ + +static char ftape_id[] = "ftape"; /* used by request irq and free irq */ + +static int fdc_set_seek_rate(int seek_rate); + +void fdc_catch_stray_interrupts(int count) +{ + unsigned long flags; + + spin_lock_irqsave(&fdc_io_lock, flags); + if (count == 0) { + ft_expected_stray_interrupts = 0; + } else { + ft_expected_stray_interrupts += count; + } + spin_unlock_irqrestore(&fdc_io_lock, flags); +} + +/* Wait during a timeout period for a given FDC status. + * If usecs == 0 then just test status, else wait at least for usecs. + * Returns -ETIME on timeout. Function must be calibrated first ! + */ +static int fdc_wait(unsigned int usecs, __u8 mask, __u8 state) +{ + int count_1 = (fdc_calibr_count * usecs + + fdc_calibr_count - 1) / fdc_calibr_time; + + do { + fdc_status = inb_p(fdc.msr); + if ((fdc_status & mask) == state) { + return 0; + } + } while (count_1-- >= 0); + return -ETIME; +} + +int fdc_ready_wait(unsigned int usecs) +{ + return fdc_wait(usecs, FDC_DATA_READY | FDC_BUSY, FDC_DATA_READY); +} + +/* Why can't we just use udelay()? + */ +static void fdc_usec_wait(unsigned int usecs) +{ + fdc_wait(usecs, 0, 1); /* will always timeout ! */ +} + +static int fdc_ready_out_wait(unsigned int usecs) +{ + fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ + return fdc_wait(usecs, FDC_DATA_OUT_READY, FDC_DATA_OUT_READY); +} + +void fdc_wait_calibrate(void) +{ + ftape_calibrate("fdc_wait", + fdc_usec_wait, &fdc_calibr_count, &fdc_calibr_time); +} + +/* Wait for a (short) while for the FDC to become ready + * and transfer the next command byte. + * Return -ETIME on timeout on getting ready (depends on hardware!). + */ +static int fdc_write(const __u8 data) +{ + fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ + if (fdc_wait(150, FDC_DATA_READY_MASK, FDC_DATA_IN_READY) < 0) { + return -ETIME; + } else { + outb(data, fdc.fifo); + return 0; + } +} + +/* Wait for a (short) while for the FDC to become ready + * and transfer the next result byte. + * Return -ETIME if timeout on getting ready (depends on hardware!). + */ +static int fdc_read(__u8 * data) +{ + fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ + if (fdc_wait(150, FDC_DATA_READY_MASK, FDC_DATA_OUT_READY) < 0) { + return -ETIME; + } else { + *data = inb(fdc.fifo); + return 0; + } +} + +/* Output a cmd_len long command string to the FDC. + * The FDC should be ready to receive a new command or + * an error (EBUSY or ETIME) will occur. + */ +int fdc_command(const __u8 * cmd_data, int cmd_len) +{ + int result = 0; + unsigned long flags; + int count = cmd_len; + int retry = 0; +#ifdef TESTING + static unsigned int last_time; + unsigned int time; +#endif + TRACE_FUN(ft_t_any); + + fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ + spin_lock_irqsave(&fdc_io_lock, flags); + if (!in_interrupt()) + /* Yes, I know, too much comments inside this function + * ... + * + * Yet another bug in the original driver. All that + * havoc is caused by the fact that the isr() sends + * itself a command to the floppy tape driver (pause, + * micro step pause). Now, the problem is that + * commands are transmitted via the fdc_seek + * command. But: the fdc performs seeks in the + * background i.e. it doesn't signal busy while + * sending the step pulses to the drive. Therefore the + * non-interrupt level driver has no chance to tell + * whether the isr() just has issued a seek. Therefore + * we HAVE TO have a look at the ft_hide_interrupt + * flag: it signals the non-interrupt level part of + * the driver that it has to wait for the fdc until it + * has completet seeking. + * + * THIS WAS PRESUMABLY THE REASON FOR ALL THAT + * "fdc_read timeout" errors, I HOPE :-) + */ + if (ft_hide_interrupt) { + restore_flags(flags); + TRACE(ft_t_info, + "Waiting for the isr() completing fdc_seek()"); + if (fdc_interrupt_wait(2 * FT_SECOND) < 0) { + TRACE(ft_t_warn, + "Warning: timeout waiting for isr() seek to complete"); + } + if (ft_hide_interrupt || !ft_seek_completed) { + /* There cannot be another + * interrupt. The isr() only stops + * the tape and the next interrupt + * won't come until we have send our + * command to the drive. + */ + TRACE_ABORT(-EIO, ft_t_bug, + "BUG? isr() is still seeking?\n" + KERN_INFO "hide: %d\n" + KERN_INFO "seek: %d", + ft_hide_interrupt, + ft_seek_completed); + + } + fdc_usec_wait(FT_RQM_DELAY); /* wait for valid RQM status */ + spin_lock_irqsave(&fdc_io_lock, flags); + } + fdc_status = inb(fdc.msr); + if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_IN_READY) { + spin_unlock_irqrestore(&fdc_io_lock, flags); + TRACE_ABORT(-EBUSY, ft_t_err, "fdc not ready"); + } + fdc_mode = *cmd_data; /* used by isr */ +#ifdef TESTING + if (fdc_mode == FDC_SEEK) { + time = ftape_timediff(last_time, ftape_timestamp()); + if (time < 6000) { + TRACE(ft_t_bug,"Warning: short timeout between seek commands: %d", + time); + } + } +#endif + if (!in_interrupt()) { + /* shouldn't be cleared if called from isr + */ + ft_interrupt_seen = 0; + } + while (count) { + result = fdc_write(*cmd_data); + if (result < 0) { + TRACE(ft_t_fdc_dma, + "fdc_mode = %02x, status = %02x at index %d", + (int) fdc_mode, (int) fdc_status, + cmd_len - count); + if (++retry <= 3) { + TRACE(ft_t_warn, "fdc_write timeout, retry"); + } else { + TRACE(ft_t_err, "fdc_write timeout, fatal"); + /* recover ??? */ + break; + } + } else { + --count; + ++cmd_data; + } + } +#ifdef TESTING + if (fdc_mode == FDC_SEEK) { + last_time = ftape_timestamp(); + } +#endif + spin_unlock_irqrestore(&fdc_io_lock, flags); + TRACE_EXIT result; +} + +/* Input a res_len long result string from the FDC. + * The FDC should be ready to send the result or an error + * (EBUSY or ETIME) will occur. + */ +int fdc_result(__u8 * res_data, int res_len) +{ + int result = 0; + unsigned long flags; + int count = res_len; + int retry = 0; + TRACE_FUN(ft_t_any); + + spin_lock_irqsave(&fdc_io_lock, flags); + fdc_status = inb(fdc.msr); + if ((fdc_status & FDC_DATA_READY_MASK) != FDC_DATA_OUT_READY) { + TRACE(ft_t_err, "fdc not ready"); + result = -EBUSY; + } else while (count) { + if (!(fdc_status & FDC_BUSY)) { + spin_unlock_irqrestore(&fdc_io_lock, flags); + TRACE_ABORT(-EIO, ft_t_err, "premature end of result phase"); + } + result = fdc_read(res_data); + if (result < 0) { + TRACE(ft_t_fdc_dma, + "fdc_mode = %02x, status = %02x at index %d", + (int) fdc_mode, + (int) fdc_status, + res_len - count); + if (++retry <= 3) { + TRACE(ft_t_warn, "fdc_read timeout, retry"); + } else { + TRACE(ft_t_err, "fdc_read timeout, fatal"); + /* recover ??? */ + break; + ++retry; + } + } else { + --count; + ++res_data; + } + } + spin_unlock_irqrestore(&fdc_io_lock, flags); + fdc_usec_wait(FT_RQM_DELAY); /* allow FDC to negate BSY */ + TRACE_EXIT result; +} + +/* Handle command and result phases for + * commands without data phase. + */ +static int fdc_issue_command(const __u8 * out_data, int out_count, + __u8 * in_data, int in_count) +{ + TRACE_FUN(ft_t_any); + + if (out_count > 0) { + TRACE_CATCH(fdc_command(out_data, out_count),); + } + /* will take 24 - 30 usec for fdc_sense_drive_status and + * fdc_sense_interrupt_status commands. + * 35 fails sometimes (5/9/93 SJL) + * On a loaded system it incidentally takes longer than + * this for the fdc to get ready ! ?????? WHY ?????? + * So until we know what's going on use a very long timeout. + */ + TRACE_CATCH(fdc_ready_out_wait(500 /* usec */),); + if (in_count > 0) { + TRACE_CATCH(fdc_result(in_data, in_count), + TRACE(ft_t_err, "result phase aborted")); + } + TRACE_EXIT 0; +} + +/* Wait for FDC interrupt with timeout (in milliseconds). + * Signals are blocked so the wait will not be aborted. + * Note: interrupts must be enabled ! (23/05/93 SJL) + */ +int fdc_interrupt_wait(unsigned int time) +{ + DECLARE_WAITQUEUE(wait,current); + sigset_t old_sigmask; + static int resetting; + long timeout; + + TRACE_FUN(ft_t_fdc_dma); + + if (waitqueue_active(&ftape_wait_intr)) { + TRACE_ABORT(-EIO, ft_t_err, "error: nested call"); + } + /* timeout time will be up to USPT microseconds too long ! */ + timeout = (1000 * time + FT_USPT - 1) / FT_USPT; + + spin_lock_irq(¤t->sighand->siglock); + old_sigmask = current->blocked; + sigfillset(¤t->blocked); + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&ftape_wait_intr, &wait); + while (!ft_interrupt_seen && timeout) { + set_current_state(TASK_INTERRUPTIBLE); + timeout = schedule_timeout(timeout); + } + + spin_lock_irq(¤t->sighand->siglock); + current->blocked = old_sigmask; + recalc_sigpending(); + spin_unlock_irq(¤t->sighand->siglock); + + remove_wait_queue(&ftape_wait_intr, &wait); + /* the following IS necessary. True: as well + * wake_up_interruptible() as the schedule() set TASK_RUNNING + * when they wakeup a task, BUT: it may very well be that + * ft_interrupt_seen is already set to 1 when we enter here + * in which case schedule() gets never called, and + * TASK_RUNNING never set. This has the funny effect that we + * execute all the code until we leave kernel space, but then + * the task is stopped (a task CANNOT be preempted while in + * kernel mode. Sending a pair of SIGSTOP/SIGCONT to the + * tasks wakes it up again. Funny! :-) + */ + current->state = TASK_RUNNING; + if (ft_interrupt_seen) { /* woken up by interrupt */ + ft_interrupt_seen = 0; + TRACE_EXIT 0; + } + /* Original comment: + * In first instance, next statement seems unnecessary since + * it will be cleared in fdc_command. However, a small part of + * the software seems to rely on this being cleared here + * (ftape_close might fail) so stick to it until things get fixed ! + */ + /* My deeply sought of knowledge: + * Behold NO! It is obvious. fdc_reset() doesn't call fdc_command() + * but nevertheless uses fdc_interrupt_wait(). OF COURSE this needs to + * be reset here. + */ + ft_interrupt_seen = 0; /* clear for next call */ + if (!resetting) { + resetting = 1; /* break infinite recursion if reset fails */ + TRACE(ft_t_any, "cleanup reset"); + fdc_reset(); + resetting = 0; + } + TRACE_EXIT (signal_pending(current)) ? -EINTR : -ETIME; +} + +/* Start/stop drive motor. Enable DMA mode. + */ +void fdc_motor(int motor) +{ + int unit = ft_drive_sel; + int data = unit | FDC_RESET_NOT | FDC_DMA_MODE; + TRACE_FUN(ft_t_any); + + ftape_motor = motor; + if (ftape_motor) { + data |= FDC_MOTOR_0 << unit; + TRACE(ft_t_noise, "turning motor %d on", unit); + } else { + TRACE(ft_t_noise, "turning motor %d off", unit); + } + if (ft_mach2) { + outb_p(data, fdc.dor2); + } else { + outb_p(data, fdc.dor); + } + ftape_sleep(10 * FT_MILLISECOND); + TRACE_EXIT; +} + +static void fdc_update_dsr(void) +{ + TRACE_FUN(ft_t_any); + + TRACE(ft_t_flow, "rate = %d Kbps, precomp = %d ns", + fdc_data_rate, fdc_precomp); + if (fdc.type >= i82077) { + outb_p((fdc_rate_code & 0x03) | fdc_prec_code, fdc.dsr); + } else { + outb_p(fdc_rate_code & 0x03, fdc.ccr); + } + TRACE_EXIT; +} + +void fdc_set_write_precomp(int precomp) +{ + TRACE_FUN(ft_t_any); + + TRACE(ft_t_noise, "New precomp: %d nsec", precomp); + fdc_precomp = precomp; + /* write precompensation can be set in multiples of 41.67 nsec. + * round the parameter to the nearest multiple and convert it + * into a fdc setting. Note that 0 means default to the fdc, + * 7 is used instead of that. + */ + fdc_prec_code = ((fdc_precomp + 21) / 42) << 2; + if (fdc_prec_code == 0 || fdc_prec_code > (6 << 2)) { + fdc_prec_code = 7 << 2; + } + fdc_update_dsr(); + TRACE_EXIT; +} + +/* Reprogram the 82078 registers to use Data Rate Table 1 on all drives. + */ +static void fdc_set_drive_specs(void) +{ + __u8 cmd[] = { FDC_DRIVE_SPEC, 0x00, 0x00, 0x00, 0x00, 0xc0}; + int result; + TRACE_FUN(ft_t_any); + + TRACE(ft_t_flow, "Setting of drive specs called"); + if (fdc.type >= i82078_1) { + cmd[1] = (0 << 5) | (2 << 2); + cmd[2] = (1 << 5) | (2 << 2); + cmd[3] = (2 << 5) | (2 << 2); + cmd[4] = (3 << 5) | (2 << 2); + result = fdc_command(cmd, NR_ITEMS(cmd)); + if (result < 0) { + TRACE(ft_t_err, "Setting of drive specs failed"); + } + } + TRACE_EXIT; +} + +/* Select clock for fdc, must correspond with tape drive setting ! + * This also influences the fdc timing so we must adjust some values. + */ +int fdc_set_data_rate(int rate) +{ + int bad_rate = 0; + TRACE_FUN(ft_t_any); + + /* Select clock for fdc, must correspond with tape drive setting ! + * This also influences the fdc timing so we must adjust some values. + */ + TRACE(ft_t_fdc_dma, "new rate = %d", rate); + switch (rate) { + case 250: + fdc_rate_code = fdc_data_rate_250; + break; + case 500: + fdc_rate_code = fdc_data_rate_500; + break; + case 1000: + if (fdc.type < i82077) { + bad_rate = 1; + } else { + fdc_rate_code = fdc_data_rate_1000; + } + break; + case 2000: + if (fdc.type < i82078_1) { + bad_rate = 1; + } else { + fdc_rate_code = fdc_data_rate_2000; + } + break; + default: + bad_rate = 1; + } + if (bad_rate) { + TRACE_ABORT(-EIO, + ft_t_fdc_dma, "%d is not a valid data rate", rate); + } + fdc_data_rate = rate; + fdc_update_dsr(); + fdc_set_seek_rate(fdc_seek_rate); /* clock changed! */ + ftape_udelay(1000); + TRACE_EXIT 0; +} + +/* keep the unit select if keep_select is != 0, + */ +static void fdc_dor_reset(int keep_select) +{ + __u8 fdc_ctl = ft_drive_sel; + + if (keep_select != 0) { + fdc_ctl |= FDC_DMA_MODE; + if (ftape_motor) { + fdc_ctl |= FDC_MOTOR_0 << ft_drive_sel; + } + } + ftape_udelay(10); /* ??? but seems to be necessary */ + if (ft_mach2) { + outb_p(fdc_ctl & 0x0f, fdc.dor); + outb_p(fdc_ctl, fdc.dor2); + } else { + outb_p(fdc_ctl, fdc.dor); + } + fdc_usec_wait(10); /* delay >= 14 fdc clocks */ + if (keep_select == 0) { + fdc_ctl = 0; + } + fdc_ctl |= FDC_RESET_NOT; + if (ft_mach2) { + outb_p(fdc_ctl & 0x0f, fdc.dor); + outb_p(fdc_ctl, fdc.dor2); + } else { + outb_p(fdc_ctl, fdc.dor); + } +} + +/* Reset the floppy disk controller. Leave the ftape_unit selected. + */ +void fdc_reset(void) +{ + int st0; + int i; + int dummy; + unsigned long flags; + TRACE_FUN(ft_t_any); + + spin_lock_irqsave(&fdc_io_lock, flags); + + fdc_dor_reset(1); /* keep unit selected */ + + fdc_mode = fdc_idle; + + /* maybe the cli()/sti() pair is not necessary, BUT: + * the following line MUST be here. Otherwise fdc_interrupt_wait() + * won't wait. Note that fdc_reset() is called from + * ftape_dumb_stop() when the fdc is busy transferring data. In this + * case fdc_isr() MOST PROBABLY sets ft_interrupt_seen, and tries + * to get the result bytes from the fdc etc. CLASH. + */ + ft_interrupt_seen = 0; + + /* Program data rate + */ + fdc_update_dsr(); /* restore data rate and precomp */ + + spin_unlock_irqrestore(&fdc_io_lock, flags); + + /* + * Wait for first polling cycle to complete + */ + if (fdc_interrupt_wait(1 * FT_SECOND) < 0) { + TRACE(ft_t_err, "no drive polling interrupt!"); + } else { /* clear all disk-changed statuses */ + for (i = 0; i < 4; ++i) { + if(fdc_sense_interrupt_status(&st0, &dummy) != 0) { + TRACE(ft_t_err, "sense failed for %d", i); + } + if (i == ft_drive_sel) { + ftape_current_cylinder = dummy; + } + } + TRACE(ft_t_noise, "drive polling completed"); + } + /* + * SPECIFY COMMAND + */ + fdc_set_seek_rate(fdc_seek_rate); + /* + * DRIVE SPECIFICATION COMMAND (if fdc type known) + */ + if (fdc.type >= i82078_1) { + fdc_set_drive_specs(); + } + TRACE_EXIT; +} + +#if !defined(CLK_48MHZ) +# define CLK_48MHZ 1 +#endif + +/* When we're done, put the fdc into reset mode so that the regular + * floppy disk driver will figure out that something is wrong and + * initialize the controller the way it wants. + */ +void fdc_disable(void) +{ + __u8 cmd1[] = {FDC_CONFIGURE, 0x00, 0x00, 0x00}; + __u8 cmd2[] = {FDC_LOCK}; + __u8 cmd3[] = {FDC_UNLOCK}; + __u8 stat[1]; + TRACE_FUN(ft_t_flow); + + if (!fdc_fifo_locked) { + fdc_reset(); + TRACE_EXIT; + } + if (fdc_issue_command(cmd3, 1, stat, 1) < 0 || stat[0] != 0x00) { + fdc_dor_reset(0); + TRACE_ABORT(/**/, ft_t_bug, + "couldn't unlock fifo, configuration remains changed"); + } + fdc_fifo_locked = 0; + if (CLK_48MHZ && fdc.type >= i82078) { + cmd1[0] |= FDC_CLK48_BIT; + } + cmd1[2] = ((fdc_fifo_state) ? 0 : 0x20) + (fdc_fifo_thr - 1); + if (fdc_command(cmd1, NR_ITEMS(cmd1)) < 0) { + fdc_dor_reset(0); + TRACE_ABORT(/**/, ft_t_bug, + "couldn't reconfigure fifo to old state"); + } + if (fdc_lock_state && + fdc_issue_command(cmd2, 1, stat, 1) < 0) { + fdc_dor_reset(0); + TRACE_ABORT(/**/, ft_t_bug, "couldn't lock old state again"); + } + TRACE(ft_t_noise, "fifo restored: %sabled, thr. %d, %slocked", + fdc_fifo_state ? "en" : "dis", + fdc_fifo_thr, (fdc_lock_state) ? "" : "not "); + fdc_dor_reset(0); + TRACE_EXIT; +} + +/* Specify FDC seek-rate (milliseconds) + */ +static int fdc_set_seek_rate(int seek_rate) +{ + /* set step rate, dma mode, and minimal head load and unload times + */ + __u8 in[3] = { FDC_SPECIFY, 1, (1 << 1)}; + + fdc_seek_rate = seek_rate; + in[1] |= (16 - (fdc_data_rate * fdc_seek_rate) / 500) << 4; + + return fdc_command(in, 3); +} + +/* Sense drive status: get unit's drive status (ST3) + */ +int fdc_sense_drive_status(int *st3) +{ + __u8 out[2]; + __u8 in[1]; + TRACE_FUN(ft_t_any); + + out[0] = FDC_SENSED; + out[1] = ft_drive_sel; + TRACE_CATCH(fdc_issue_command(out, 2, in, 1),); + *st3 = in[0]; + TRACE_EXIT 0; +} + +/* Sense Interrupt Status command: + * should be issued at the end of each seek. + * get ST0 and current cylinder. + */ +int fdc_sense_interrupt_status(int *st0, int *current_cylinder) +{ + __u8 out[1]; + __u8 in[2]; + TRACE_FUN(ft_t_any); + + out[0] = FDC_SENSEI; + TRACE_CATCH(fdc_issue_command(out, 1, in, 2),); + *st0 = in[0]; + *current_cylinder = in[1]; + TRACE_EXIT 0; +} + +/* step to track + */ +int fdc_seek(int track) +{ + __u8 out[3]; + int st0, pcn; +#ifdef TESTING + unsigned int time; +#endif + TRACE_FUN(ft_t_any); + + out[0] = FDC_SEEK; + out[1] = ft_drive_sel; + out[2] = track; +#ifdef TESTING + time = ftape_timestamp(); +#endif + /* We really need this command to work ! + */ + ft_seek_completed = 0; + TRACE_CATCH(fdc_command(out, 3), + fdc_reset(); + TRACE(ft_t_noise, "destination was: %d, resetting FDC...", + track)); + /* Handle interrupts until ft_seek_completed or timeout. + */ + for (;;) { + TRACE_CATCH(fdc_interrupt_wait(2 * FT_SECOND),); + if (ft_seek_completed) { + TRACE_CATCH(fdc_sense_interrupt_status(&st0, &pcn),); + if ((st0 & ST0_SEEK_END) == 0) { + TRACE_ABORT(-EIO, ft_t_err, + "no seek-end after seek completion !??"); + } + break; + } + } +#ifdef TESTING + time = ftape_timediff(time, ftape_timestamp()) / abs(track - ftape_current_cylinder); + if ((time < 900 || time > 3100) && abs(track - ftape_current_cylinder) > 5) { + TRACE(ft_t_warn, "Wrong FDC STEP interval: %d usecs (%d)", + time, track - ftape_current_cylinder); + } +#endif + /* Verify whether we issued the right tape command. + */ + /* Verify that we seek to the proper track. */ + if (pcn != track) { + TRACE_ABORT(-EIO, ft_t_err, "bad seek.."); + } + ftape_current_cylinder = track; + TRACE_EXIT 0; +} + +static int perpend_mode; /* set if fdc is in perpendicular mode */ + +static int perpend_off(void) +{ + __u8 perpend[] = {FDC_PERPEND, 0x00}; + TRACE_FUN(ft_t_any); + + if (perpend_mode) { + /* Turn off perpendicular mode */ + perpend[1] = 0x80; + TRACE_CATCH(fdc_command(perpend, 2), + TRACE(ft_t_err,"Perpendicular mode exit failed!")); + perpend_mode = 0; + } + TRACE_EXIT 0; +} + +static int handle_perpend(int segment_id) +{ + __u8 perpend[] = {FDC_PERPEND, 0x00}; + TRACE_FUN(ft_t_any); + + /* When writing QIC-3020 tapes, turn on perpendicular mode + * if tape is moving in forward direction (even tracks). + */ + if (ft_qic_std == QIC_TAPE_QIC3020 && + ((segment_id / ft_segments_per_track) & 1) == 0) { +/* FIXME: some i82077 seem to support perpendicular mode as + * well. + */ +#if 0 + if (fdc.type < i82077AA) {} +#else + if (fdc.type < i82077 && ft_data_rate < 1000) { +#endif + /* fdc does not support perpendicular mode: complain + */ + TRACE_ABORT(-EIO, ft_t_err, + "Your FDC does not support QIC-3020."); + } + perpend[1] = 0x03 /* 0x83 + (0x4 << ft_drive_sel) */ ; + TRACE_CATCH(fdc_command(perpend, 2), + TRACE(ft_t_err,"Perpendicular mode entry failed!")); + TRACE(ft_t_flow, "Perpendicular mode set"); + perpend_mode = 1; + TRACE_EXIT 0; + } + TRACE_EXIT perpend_off(); +} + +static inline void fdc_setup_dma(char mode, + volatile void *addr, unsigned int count) +{ + /* Program the DMA controller. + */ + disable_dma(fdc.dma); + clear_dma_ff(fdc.dma); + set_dma_mode(fdc.dma, mode); + set_dma_addr(fdc.dma, virt_to_bus((void*)addr)); + set_dma_count(fdc.dma, count); + enable_dma(fdc.dma); +} + +/* Setup fdc and dma for formatting the next segment + */ +int fdc_setup_formatting(buffer_struct * buff) +{ + unsigned long flags; + __u8 out[6] = { + FDC_FORMAT, 0x00, 3, 4 * FT_SECTORS_PER_SEGMENT, 0x00, 0x6b + }; + TRACE_FUN(ft_t_any); + + TRACE_CATCH(handle_perpend(buff->segment_id),); + /* Program the DMA controller. + */ + TRACE(ft_t_fdc_dma, + "phys. addr. = %lx", virt_to_bus((void*) buff->ptr)); + spin_lock_irqsave(&fdc_io_lock, flags); + fdc_setup_dma(DMA_MODE_WRITE, buff->ptr, FT_SECTORS_PER_SEGMENT * 4); + /* Issue FDC command to start reading/writing. + */ + out[1] = ft_drive_sel; + out[4] = buff->gap3; + TRACE_CATCH(fdc_setup_error = fdc_command(out, sizeof(out)), + restore_flags(flags); fdc_mode = fdc_idle); + spin_unlock_irqrestore(&fdc_io_lock, flags); + TRACE_EXIT 0; +} + + +/* Setup Floppy Disk Controller and DMA to read or write the next cluster + * of good sectors from or to the current segment. + */ +int fdc_setup_read_write(buffer_struct * buff, __u8 operation) +{ + unsigned long flags; + __u8 out[9]; + int dma_mode; + TRACE_FUN(ft_t_any); + + switch(operation) { + case FDC_VERIFY: + if (fdc.type < i82077) { + operation = FDC_READ; + } + case FDC_READ: + case FDC_READ_DELETED: + dma_mode = DMA_MODE_READ; + TRACE(ft_t_fdc_dma, "xfer %d sectors to 0x%p", + buff->sector_count, buff->ptr); + TRACE_CATCH(perpend_off(),); + break; + case FDC_WRITE_DELETED: + TRACE(ft_t_noise, "deleting segment %d", buff->segment_id); + case FDC_WRITE: + dma_mode = DMA_MODE_WRITE; + /* When writing QIC-3020 tapes, turn on perpendicular mode + * if tape is moving in forward direction (even tracks). + */ + TRACE_CATCH(handle_perpend(buff->segment_id),); + TRACE(ft_t_fdc_dma, "xfer %d sectors from 0x%p", + buff->sector_count, buff->ptr); + break; + default: + TRACE_ABORT(-EIO, + ft_t_bug, "bug: invalid operation parameter"); + } + TRACE(ft_t_fdc_dma, "phys. addr. = %lx",virt_to_bus((void*)buff->ptr)); + spin_lock_irqsave(&fdc_io_lock, flags); + if (operation != FDC_VERIFY) { + fdc_setup_dma(dma_mode, buff->ptr, + FT_SECTOR_SIZE * buff->sector_count); + } + /* Issue FDC command to start reading/writing. + */ + out[0] = operation; + out[1] = ft_drive_sel; + out[2] = buff->cyl; + out[3] = buff->head; + out[4] = buff->sect + buff->sector_offset; + out[5] = 3; /* Sector size of 1K. */ + out[6] = out[4] + buff->sector_count - 1; /* last sector */ + out[7] = 109; /* Gap length. */ + out[8] = 0xff; /* No limit to transfer size. */ + TRACE(ft_t_fdc_dma, "C: 0x%02x, H: 0x%02x, R: 0x%02x, cnt: 0x%02x", + out[2], out[3], out[4], out[6] - out[4] + 1); + spin_unlock_irqrestore(&fdc_io_lock, flags); + TRACE_CATCH(fdc_setup_error = fdc_command(out, 9),fdc_mode = fdc_idle); + TRACE_EXIT 0; +} + +int fdc_fifo_threshold(__u8 threshold, + int *fifo_state, int *lock_state, int *fifo_thr) +{ + const __u8 cmd0[] = {FDC_DUMPREGS}; + __u8 cmd1[] = {FDC_CONFIGURE, 0, (0x0f & (threshold - 1)), 0}; + const __u8 cmd2[] = {FDC_LOCK}; + const __u8 cmd3[] = {FDC_UNLOCK}; + __u8 reg[10]; + __u8 stat; + int i; + int result; + TRACE_FUN(ft_t_any); + + if (CLK_48MHZ && fdc.type >= i82078) { + cmd1[0] |= FDC_CLK48_BIT; + } + /* Dump fdc internal registers for examination + */ + TRACE_CATCH(fdc_command(cmd0, NR_ITEMS(cmd0)), + TRACE(ft_t_warn, "dumpreg cmd failed, fifo unchanged")); + /* Now read fdc internal registers from fifo + */ + for (i = 0; i < (int)NR_ITEMS(reg); ++i) { + fdc_read(®[i]); + TRACE(ft_t_fdc_dma, "Register %d = 0x%02x", i, reg[i]); + } + if (fifo_state && lock_state && fifo_thr) { + *fifo_state = (reg[8] & 0x20) == 0; + *lock_state = reg[7] & 0x80; + *fifo_thr = 1 + (reg[8] & 0x0f); + } + TRACE(ft_t_noise, + "original fifo state: %sabled, threshold %d, %slocked", + ((reg[8] & 0x20) == 0) ? "en" : "dis", + 1 + (reg[8] & 0x0f), (reg[7] & 0x80) ? "" : "not "); + /* If fdc is already locked, unlock it first ! */ + if (reg[7] & 0x80) { + fdc_ready_wait(100); + TRACE_CATCH(fdc_issue_command(cmd3, NR_ITEMS(cmd3), &stat, 1), + TRACE(ft_t_bug, "FDC unlock command failed, " + "configuration unchanged")); + } + fdc_fifo_locked = 0; + /* Enable fifo and set threshold at xx bytes to allow a + * reasonably large latency and reduce number of dma bursts. + */ + fdc_ready_wait(100); + if ((result = fdc_command(cmd1, NR_ITEMS(cmd1))) < 0) { + TRACE(ft_t_bug, "configure cmd failed, fifo unchanged"); + } + /* Now lock configuration so reset will not change it + */ + if(fdc_issue_command(cmd2, NR_ITEMS(cmd2), &stat, 1) < 0 || + stat != 0x10) { + TRACE_ABORT(-EIO, ft_t_bug, + "FDC lock command failed, stat = 0x%02x", stat); + } + fdc_fifo_locked = 1; + TRACE_EXIT result; +} + +static int fdc_fifo_enable(void) +{ + TRACE_FUN(ft_t_any); + + if (fdc_fifo_locked) { + TRACE_ABORT(0, ft_t_warn, "Fifo not enabled because locked"); + } + TRACE_CATCH(fdc_fifo_threshold(ft_fdc_threshold /* bytes */, + &fdc_fifo_state, + &fdc_lock_state, + &fdc_fifo_thr),); + TRACE_CATCH(fdc_fifo_threshold(ft_fdc_threshold /* bytes */, + NULL, NULL, NULL),); + TRACE_EXIT 0; +} + +/* Determine fd controller type + */ +static __u8 fdc_save_state[2]; + +static int fdc_probe(void) +{ + __u8 cmd[1]; + __u8 stat[16]; /* must be able to hold dumpregs & save results */ + int i; + TRACE_FUN(ft_t_any); + + /* Try to find out what kind of fd controller we have to deal with + * Scheme borrowed from floppy driver: + * first try if FDC_DUMPREGS command works + * (this indicates that we have a 82072 or better) + * then try the FDC_VERSION command (82072 doesn't support this) + * then try the FDC_UNLOCK command (some older 82077's don't support this) + * then try the FDC_PARTID command (82078's support this) + */ + cmd[0] = FDC_DUMPREGS; + if (fdc_issue_command(cmd, 1, stat, 1) != 0) { + TRACE_ABORT(no_fdc, ft_t_bug, "No FDC found"); + } + if (stat[0] == 0x80) { + /* invalid command: must be pre 82072 */ + TRACE_ABORT(i8272, + ft_t_warn, "Type 8272A/765A compatible FDC found"); + } + fdc_result(&stat[1], 9); + fdc_save_state[0] = stat[7]; + fdc_save_state[1] = stat[8]; + cmd[0] = FDC_VERSION; + if (fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] == 0x80) { + TRACE_ABORT(i8272, ft_t_warn, "Type 82072 FDC found"); + } + if (*stat != 0x90) { + TRACE_ABORT(i8272, ft_t_warn, "Unknown FDC found"); + } + cmd[0] = FDC_UNLOCK; + if(fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] != 0x00) { + TRACE_ABORT(i8272, ft_t_warn, + "Type pre-1991 82077 FDC found, " + "treating it like a 82072"); + } + if (fdc_save_state[0] & 0x80) { /* was locked */ + cmd[0] = FDC_LOCK; /* restore lock */ + (void)fdc_issue_command(cmd, 1, stat, 1); + TRACE(ft_t_warn, "FDC is already locked"); + } + /* Test for a i82078 FDC */ + cmd[0] = FDC_PARTID; + if (fdc_issue_command(cmd, 1, stat, 1) < 0 || stat[0] == 0x80) { + /* invalid command: not a i82078xx type FDC */ + for (i = 0; i < 4; ++i) { + outb_p(i, fdc.tdr); + if ((inb_p(fdc.tdr) & 0x03) != i) { + TRACE_ABORT(i82077, + ft_t_warn, "Type 82077 FDC found"); + } + } + TRACE_ABORT(i82077AA, ft_t_warn, "Type 82077AA FDC found"); + } + /* FDC_PARTID cmd succeeded */ + switch (stat[0] >> 5) { + case 0x0: + /* i82078SL or i82078-1. The SL part cannot run at + * 2Mbps (the SL and -1 dies are identical; they are + * speed graded after production, according to Intel). + * Some SL's can be detected by doing a SAVE cmd and + * look at bit 7 of the first byte (the SEL3V# bit). + * If it is 0, the part runs off 3Volts, and hence it + * is a SL. + */ + cmd[0] = FDC_SAVE; + if(fdc_issue_command(cmd, 1, stat, 16) < 0) { + TRACE(ft_t_err, "FDC_SAVE failed. Dunno why"); + /* guess we better claim the fdc to be a i82078 */ + TRACE_ABORT(i82078, + ft_t_warn, + "Type i82078 FDC (i suppose) found"); + } + if ((stat[0] & FDC_SEL3V_BIT)) { + /* fdc running off 5Volts; Pray that it's a i82078-1 + */ + TRACE_ABORT(i82078_1, ft_t_warn, + "Type i82078-1 or 5Volt i82078SL FDC found"); + } + TRACE_ABORT(i82078, ft_t_warn, + "Type 3Volt i82078SL FDC (1Mbps) found"); + case 0x1: + case 0x2: /* S82078B */ + /* The '78B isn't '78 compatible. Detect it as a '77AA */ + TRACE_ABORT(i82077AA, ft_t_warn, "Type i82077AA FDC found"); + case 0x3: /* NSC PC8744 core; used in several super-IO chips */ + TRACE_ABORT(i82077AA, + ft_t_warn, "Type 82077AA compatible FDC found"); + default: + TRACE(ft_t_warn, "A previously undetected FDC found"); + TRACE_ABORT(i82077AA, ft_t_warn, + "Treating it as a 82077AA. Please report partid= %d", + stat[0]); + } /* switch(stat[ 0] >> 5) */ + TRACE_EXIT no_fdc; +} + +static int fdc_request_regions(void) +{ + TRACE_FUN(ft_t_flow); + + if (ft_mach2 || ft_probe_fc10) { + if (!request_region(fdc.sra, 8, "fdc (ft)")) { +#ifndef BROKEN_FLOPPY_DRIVER + TRACE_EXIT -EBUSY; +#else + TRACE(ft_t_warn, +"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra); +#endif + } + } else { + if (!request_region(fdc.sra, 6, "fdc (ft)")) { +#ifndef BROKEN_FLOPPY_DRIVER + TRACE_EXIT -EBUSY; +#else + TRACE(ft_t_warn, +"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra); +#endif + } + if (!request_region(fdc.sra + 7, 1, "fdc (ft)")) { +#ifndef BROKEN_FLOPPY_DRIVER + release_region(fdc.sra, 6); + TRACE_EXIT -EBUSY; +#else + TRACE(ft_t_warn, +"address 0x%03x occupied (by floppy driver?), using it anyway", fdc.sra + 7); +#endif + } + } + TRACE_EXIT 0; +} + +void fdc_release_regions(void) +{ + TRACE_FUN(ft_t_flow); + + if (fdc.sra != 0) { + if (fdc.dor2 != 0) { + release_region(fdc.sra, 8); + } else { + release_region(fdc.sra, 6); + release_region(fdc.dir, 1); + } + } + TRACE_EXIT; +} + +static int fdc_config_regs(unsigned int fdc_base, + unsigned int fdc_irq, + unsigned int fdc_dma) +{ + TRACE_FUN(ft_t_flow); + + fdc.irq = fdc_irq; + fdc.dma = fdc_dma; + fdc.sra = fdc_base; + fdc.srb = fdc_base + 1; + fdc.dor = fdc_base + 2; + fdc.tdr = fdc_base + 3; + fdc.msr = fdc.dsr = fdc_base + 4; + fdc.fifo = fdc_base + 5; + fdc.dir = fdc.ccr = fdc_base + 7; + fdc.dor2 = (ft_mach2 || ft_probe_fc10) ? fdc_base + 6 : 0; + TRACE_CATCH(fdc_request_regions(), fdc.sra = 0); + TRACE_EXIT 0; +} + +static int fdc_config(void) +{ + static int already_done; + TRACE_FUN(ft_t_any); + + if (already_done) { + TRACE_CATCH(fdc_request_regions(),); + *(fdc.hook) = fdc_isr; /* hook our handler in */ + TRACE_EXIT 0; + } + if (ft_probe_fc10) { + int fc_type; + + TRACE_CATCH(fdc_config_regs(ft_fdc_base, + ft_fdc_irq, ft_fdc_dma),); + fc_type = fc10_enable(); + if (fc_type != 0) { + TRACE(ft_t_warn, "FC-%c0 controller found", '0' + fc_type); + fdc.type = fc10; + fdc.hook = &do_ftape; + *(fdc.hook) = fdc_isr; /* hook our handler in */ + already_done = 1; + TRACE_EXIT 0; + } else { + TRACE(ft_t_warn, "FC-10/20 controller not found"); + fdc_release_regions(); + fdc.type = no_fdc; + ft_probe_fc10 = 0; + ft_fdc_base = 0x3f0; + ft_fdc_irq = 6; + ft_fdc_dma = 2; + } + } + TRACE(ft_t_warn, "fdc base: 0x%x, irq: %d, dma: %d", + ft_fdc_base, ft_fdc_irq, ft_fdc_dma); + TRACE_CATCH(fdc_config_regs(ft_fdc_base, ft_fdc_irq, ft_fdc_dma),); + fdc.hook = &do_ftape; + *(fdc.hook) = fdc_isr; /* hook our handler in */ + already_done = 1; + TRACE_EXIT 0; +} + +static irqreturn_t ftape_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + void (*handler) (void) = *fdc.hook; + int handled = 0; + TRACE_FUN(ft_t_any); + + *fdc.hook = NULL; + if (handler) { + handled = 1; + handler(); + } else { + TRACE(ft_t_bug, "Unexpected ftape interrupt"); + } + TRACE_EXIT IRQ_RETVAL(handled); +} + +static int fdc_grab_irq_and_dma(void) +{ + TRACE_FUN(ft_t_any); + + if (fdc.hook == &do_ftape) { + /* Get fast interrupt handler. + */ + if (request_irq(fdc.irq, ftape_interrupt, + SA_INTERRUPT, "ft", ftape_id)) { + TRACE_ABORT(-EIO, ft_t_bug, + "Unable to grab IRQ%d for ftape driver", + fdc.irq); + } + if (request_dma(fdc.dma, ftape_id)) { + free_irq(fdc.irq, ftape_id); + TRACE_ABORT(-EIO, ft_t_bug, + "Unable to grab DMA%d for ftape driver", + fdc.dma); + } + } + if (ft_fdc_base != 0x3f0 && (ft_fdc_dma == 2 || ft_fdc_irq == 6)) { + /* Using same dma channel or irq as standard fdc, need + * to disable the dma-gate on the std fdc. This + * couldn't be done in the floppy driver as some + * laptops are using the dma-gate to enter a low power + * or even suspended state :-( + */ + outb_p(FDC_RESET_NOT, 0x3f2); + TRACE(ft_t_noise, "DMA-gate on standard fdc disabled"); + } + TRACE_EXIT 0; +} + +int fdc_release_irq_and_dma(void) +{ + TRACE_FUN(ft_t_any); + + if (fdc.hook == &do_ftape) { + disable_dma(fdc.dma); /* just in case... */ + free_dma(fdc.dma); + free_irq(fdc.irq, ftape_id); + } + if (ft_fdc_base != 0x3f0 && (ft_fdc_dma == 2 || ft_fdc_irq == 6)) { + /* Using same dma channel as standard fdc, need to + * disable the dma-gate on the std fdc. This couldn't + * be done in the floppy driver as some laptops are + * using the dma-gate to enter a low power or even + * suspended state :-( + */ + outb_p(FDC_RESET_NOT | FDC_DMA_MODE, 0x3f2); + TRACE(ft_t_noise, "DMA-gate on standard fdc enabled again"); + } + TRACE_EXIT 0; +} + +int fdc_init(void) +{ + TRACE_FUN(ft_t_any); + + /* find a FDC to use */ + TRACE_CATCH(fdc_config(),); + TRACE_CATCH(fdc_grab_irq_and_dma(), fdc_release_regions()); + ftape_motor = 0; + fdc_catch_stray_interrupts(0); /* clear number of awainted + * stray interrupte + */ + fdc_catch_stray_interrupts(1); /* one always comes (?) */ + TRACE(ft_t_flow, "resetting fdc"); + fdc_set_seek_rate(2); /* use nominal QIC step rate */ + fdc_reset(); /* init fdc & clear track counters */ + if (fdc.type == no_fdc) { /* no FC-10 or FC-20 found */ + fdc.type = fdc_probe(); + fdc_reset(); /* update with new knowledge */ + } + if (fdc.type == no_fdc) { + fdc_release_irq_and_dma(); + fdc_release_regions(); + TRACE_EXIT -ENXIO; + } + if (fdc.type >= i82077) { + if (fdc_fifo_enable() < 0) { + TRACE(ft_t_warn, "couldn't enable fdc fifo !"); + } else { + TRACE(ft_t_flow, "fdc fifo enabled and locked"); + } + } + TRACE_EXIT 0; +} diff --git a/drivers/char/ftape/lowlevel/fdc-io.h b/drivers/char/ftape/lowlevel/fdc-io.h new file mode 100644 index 000000000000..7ec3c72178bb --- /dev/null +++ b/drivers/char/ftape/lowlevel/fdc-io.h @@ -0,0 +1,252 @@ +#ifndef _FDC_IO_H +#define _FDC_IO_H + +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-io.h,v $ + * $Revision: 1.3 $ + * $Date: 1997/10/05 19:18:06 $ + * + * This file contains the declarations for the low level + * functions that communicate with the floppy disk controller, + * for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for + * Linux. + */ + +#include <linux/fdreg.h> + +#include "../lowlevel/ftape-bsm.h" + +#define FDC_SK_BIT (0x20) +#define FDC_MT_BIT (0x80) + +#define FDC_READ (FD_READ & ~(FDC_SK_BIT | FDC_MT_BIT)) +#define FDC_WRITE (FD_WRITE & ~FDC_MT_BIT) +#define FDC_READ_DELETED (0x4c) +#define FDC_WRITE_DELETED (0x49) +#define FDC_VERIFY (0x56) +#define FDC_READID (0x4a) +#define FDC_SENSED (0x04) +#define FDC_SENSEI (FD_SENSEI) +#define FDC_FORMAT (FD_FORMAT) +#define FDC_RECAL (FD_RECALIBRATE) +#define FDC_SEEK (FD_SEEK) +#define FDC_SPECIFY (FD_SPECIFY) +#define FDC_RECALIBR (FD_RECALIBRATE) +#define FDC_VERSION (FD_VERSION) +#define FDC_PERPEND (FD_PERPENDICULAR) +#define FDC_DUMPREGS (FD_DUMPREGS) +#define FDC_LOCK (FD_LOCK) +#define FDC_UNLOCK (FD_UNLOCK) +#define FDC_CONFIGURE (FD_CONFIGURE) +#define FDC_DRIVE_SPEC (0x8e) /* i82078 has this (any others?) */ +#define FDC_PARTID (0x18) /* i82078 has this */ +#define FDC_SAVE (0x2e) /* i82078 has this (any others?) */ +#define FDC_RESTORE (0x4e) /* i82078 has this (any others?) */ + +#define FDC_STATUS_MASK (STATUS_BUSY | STATUS_DMA | STATUS_DIR | STATUS_READY) +#define FDC_DATA_READY (STATUS_READY) +#define FDC_DATA_OUTPUT (STATUS_DIR) +#define FDC_DATA_READY_MASK (STATUS_READY | STATUS_DIR) +#define FDC_DATA_OUT_READY (STATUS_READY | STATUS_DIR) +#define FDC_DATA_IN_READY (STATUS_READY) +#define FDC_BUSY (STATUS_BUSY) +#define FDC_CLK48_BIT (0x80) +#define FDC_SEL3V_BIT (0x40) + +#define ST0_INT_MASK (ST0_INTR) +#define FDC_INT_NORMAL (ST0_INTR & 0x00) +#define FDC_INT_ABNORMAL (ST0_INTR & 0x40) +#define FDC_INT_INVALID (ST0_INTR & 0x80) +#define FDC_INT_READYCH (ST0_INTR & 0xC0) +#define ST0_SEEK_END (ST0_SE) +#define ST3_TRACK_0 (ST3_TZ) + +#define FDC_RESET_NOT (0x04) +#define FDC_DMA_MODE (0x08) +#define FDC_MOTOR_0 (0x10) +#define FDC_MOTOR_1 (0x20) + +typedef struct { + void (**hook) (void); /* our wedge into the isr */ + enum { + no_fdc, i8272, i82077, i82077AA, fc10, + i82078, i82078_1 + } type; /* FDC type */ + unsigned int irq; /* FDC irq nr */ + unsigned int dma; /* FDC dma channel nr */ + __u16 sra; /* Status register A (PS/2 only) */ + __u16 srb; /* Status register B (PS/2 only) */ + __u16 dor; /* Digital output register */ + __u16 tdr; /* Tape Drive Register (82077SL-1 & + 82078 only) */ + __u16 msr; /* Main Status Register */ + __u16 dsr; /* Datarate Select Register (8207x only) */ + __u16 fifo; /* Data register / Fifo on 8207x */ + __u16 dir; /* Digital Input Register */ + __u16 ccr; /* Configuration Control Register */ + __u16 dor2; /* Alternate dor on MACH-2 controller, + also used with FC-10, meaning unknown */ +} fdc_config_info; + +typedef enum { + fdc_data_rate_250 = 2, + fdc_data_rate_300 = 1, /* any fdc in default configuration */ + fdc_data_rate_500 = 0, + fdc_data_rate_1000 = 3, + fdc_data_rate_2000 = 1, /* i82078-1: when using Data Rate Table #2 */ +} fdc_data_rate_type; + +typedef enum { + fdc_idle = 0, + fdc_reading_data = FDC_READ, + fdc_seeking = FDC_SEEK, + fdc_writing_data = FDC_WRITE, + fdc_deleting = FDC_WRITE_DELETED, + fdc_reading_id = FDC_READID, + fdc_recalibrating = FDC_RECAL, + fdc_formatting = FDC_FORMAT, + fdc_verifying = FDC_VERIFY +} fdc_mode_enum; + +typedef enum { + waiting = 0, + reading, + writing, + formatting, + verifying, + deleting, + done, + error, + mmapped, +} buffer_state_enum; + +typedef struct { + __u8 *address; + volatile buffer_state_enum status; + volatile __u8 *ptr; + volatile unsigned int bytes; + volatile unsigned int segment_id; + + /* bitmap for remainder of segment not yet handled. + * one bit set for each bad sector that must be skipped. + */ + volatile SectorMap bad_sector_map; + + /* bitmap with bad data blocks in data buffer. + * the errors in this map may be retried. + */ + volatile SectorMap soft_error_map; + + /* bitmap with bad data blocks in data buffer + * the errors in this map may not be retried. + */ + volatile SectorMap hard_error_map; + + /* retry counter for soft errors. + */ + volatile int retry; + + /* sectors to skip on retry ??? + */ + volatile unsigned int skip; + + /* nr of data blocks in data buffer + */ + volatile unsigned int data_offset; + + /* offset in segment for first sector to be handled. + */ + volatile unsigned int sector_offset; + + /* size of cluster of good sectors to be handled. + */ + volatile unsigned int sector_count; + + /* size of remaining part of segment to be handled. + */ + volatile unsigned int remaining; + + /* points to next segment (contiguous) to be handled, + * or is zero if no read-ahead is allowed. + */ + volatile unsigned int next_segment; + + /* flag being set if deleted data was read. + */ + volatile int deleted; + + /* floppy coordinates of first sector in segment */ + volatile __u8 head; + volatile __u8 cyl; + volatile __u8 sect; + + /* gap to use when formatting */ + __u8 gap3; + /* flag set when buffer is mmaped */ + int mmapped; +} buffer_struct; + +/* + * fdc-io.c defined public variables + */ +extern volatile fdc_mode_enum fdc_mode; +extern int fdc_setup_error; /* outdated ??? */ +extern wait_queue_head_t ftape_wait_intr; +extern volatile int ftape_current_cylinder; /* track nr FDC thinks we're on */ +extern volatile __u8 fdc_head; /* FDC head */ +extern volatile __u8 fdc_cyl; /* FDC track */ +extern volatile __u8 fdc_sect; /* FDC sector */ +extern fdc_config_info fdc; /* FDC hardware configuration */ + +extern unsigned int ft_fdc_base; +extern unsigned int ft_fdc_irq; +extern unsigned int ft_fdc_dma; +extern unsigned int ft_fdc_threshold; +extern unsigned int ft_fdc_rate_limit; +extern int ft_probe_fc10; +extern int ft_mach2; +/* + * fdc-io.c defined public functions + */ +extern void fdc_catch_stray_interrupts(int count); +extern int fdc_ready_wait(unsigned int timeout); +extern int fdc_command(const __u8 * cmd_data, int cmd_len); +extern int fdc_result(__u8 * res_data, int res_len); +extern int fdc_interrupt_wait(unsigned int time); +extern int fdc_seek(int track); +extern int fdc_sense_drive_status(int *st3); +extern void fdc_motor(int motor); +extern void fdc_reset(void); +extern void fdc_disable(void); +extern int fdc_fifo_threshold(__u8 threshold, + int *fifo_state, int *lock_state, int *fifo_thr); +extern void fdc_wait_calibrate(void); +extern int fdc_sense_interrupt_status(int *st0, int *current_cylinder); +extern void fdc_save_drive_specs(void); +extern void fdc_restore_drive_specs(void); +extern int fdc_set_data_rate(int rate); +extern void fdc_set_write_precomp(int precomp); +extern int fdc_release_irq_and_dma(void); +extern void fdc_release_regions(void); +extern int fdc_init(void); +extern int fdc_setup_read_write(buffer_struct * buff, __u8 operation); +extern int fdc_setup_formatting(buffer_struct * buff); +#endif diff --git a/drivers/char/ftape/lowlevel/fdc-isr.c b/drivers/char/ftape/lowlevel/fdc-isr.c new file mode 100644 index 000000000000..ad2bc733ae1b --- /dev/null +++ b/drivers/char/ftape/lowlevel/fdc-isr.c @@ -0,0 +1,1170 @@ +/* + * Copyright (C) 1994-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-isr.c,v $ + * $Revision: 1.9 $ + * $Date: 1997/10/17 23:01:53 $ + * + * This file contains the interrupt service routine and + * associated code for the QIC-40/80/3010/3020 floppy-tape driver + * "ftape" for Linux. + */ + +#include <asm/io.h> +#include <asm/dma.h> + +#define volatile /* */ + +#include <linux/ftape.h> +#include <linux/qic117.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/fdc-isr.h" +#include "../lowlevel/fdc-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-calibr.h" +#include "../lowlevel/ftape-bsm.h" + +/* Global vars. + */ +volatile int ft_expected_stray_interrupts; +volatile int ft_interrupt_seen; +volatile int ft_seek_completed; +volatile int ft_hide_interrupt; +/* Local vars. + */ +typedef enum { + no_error = 0, id_am_error = 0x01, id_crc_error = 0x02, + data_am_error = 0x04, data_crc_error = 0x08, + no_data_error = 0x10, overrun_error = 0x20, +} error_cause; +static int stop_read_ahead; + + +static void print_error_cause(int cause) +{ + TRACE_FUN(ft_t_any); + + switch (cause) { + case no_data_error: + TRACE(ft_t_noise, "no data error"); + break; + case id_am_error: + TRACE(ft_t_noise, "id am error"); + break; + case id_crc_error: + TRACE(ft_t_noise, "id crc error"); + break; + case data_am_error: + TRACE(ft_t_noise, "data am error"); + break; + case data_crc_error: + TRACE(ft_t_noise, "data crc error"); + break; + case overrun_error: + TRACE(ft_t_noise, "overrun error"); + break; + default:; + } + TRACE_EXIT; +} + +static char *fdc_mode_txt(fdc_mode_enum mode) +{ + switch (mode) { + case fdc_idle: + return "fdc_idle"; + case fdc_reading_data: + return "fdc_reading_data"; + case fdc_seeking: + return "fdc_seeking"; + case fdc_writing_data: + return "fdc_writing_data"; + case fdc_reading_id: + return "fdc_reading_id"; + case fdc_recalibrating: + return "fdc_recalibrating"; + case fdc_formatting: + return "fdc_formatting"; + case fdc_verifying: + return "fdc_verifying"; + default: + return "unknown"; + } +} + +static inline error_cause decode_irq_cause(fdc_mode_enum mode, __u8 st[]) +{ + error_cause cause = no_error; + TRACE_FUN(ft_t_any); + + /* Valid st[], decode cause of interrupt. + */ + switch (st[0] & ST0_INT_MASK) { + case FDC_INT_NORMAL: + TRACE(ft_t_fdc_dma,"normal completion: %s",fdc_mode_txt(mode)); + break; + case FDC_INT_ABNORMAL: + TRACE(ft_t_flow, "abnormal completion %s", fdc_mode_txt(mode)); + TRACE(ft_t_fdc_dma, "ST0: 0x%02x, ST1: 0x%02x, ST2: 0x%02x", + st[0], st[1], st[2]); + TRACE(ft_t_fdc_dma, + "C: 0x%02x, H: 0x%02x, R: 0x%02x, N: 0x%02x", + st[3], st[4], st[5], st[6]); + if (st[1] & 0x01) { + if (st[2] & 0x01) { + cause = data_am_error; + } else { + cause = id_am_error; + } + } else if (st[1] & 0x20) { + if (st[2] & 0x20) { + cause = data_crc_error; + } else { + cause = id_crc_error; + } + } else if (st[1] & 0x04) { + cause = no_data_error; + } else if (st[1] & 0x10) { + cause = overrun_error; + } + print_error_cause(cause); + break; + case FDC_INT_INVALID: + TRACE(ft_t_flow, "invalid completion %s", fdc_mode_txt(mode)); + break; + case FDC_INT_READYCH: + if (st[0] & ST0_SEEK_END) { + TRACE(ft_t_flow, "drive poll completed"); + } else { + TRACE(ft_t_flow, "ready change %s",fdc_mode_txt(mode)); + } + break; + default: + break; + } + TRACE_EXIT cause; +} + +static void update_history(error_cause cause) +{ + switch (cause) { + case id_am_error: + ft_history.id_am_errors++; + break; + case id_crc_error: + ft_history.id_crc_errors++; + break; + case data_am_error: + ft_history.data_am_errors++; + break; + case data_crc_error: + ft_history.data_crc_errors++; + break; + case overrun_error: + ft_history.overrun_errors++; + break; + case no_data_error: + ft_history.no_data_errors++; + break; + default:; + } +} + +static void skip_bad_sector(buffer_struct * buff) +{ + TRACE_FUN(ft_t_any); + + /* Mark sector as soft error and skip it + */ + if (buff->remaining > 0) { + ++buff->sector_offset; + ++buff->data_offset; + --buff->remaining; + buff->ptr += FT_SECTOR_SIZE; + buff->bad_sector_map >>= 1; + } else { + /* Hey, what is this????????????? C code: if we shift + * more than 31 bits, we get no shift. That's bad!!!!!! + */ + ++buff->sector_offset; /* hack for error maps */ + TRACE(ft_t_warn, "skipping last sector in segment"); + } + TRACE_EXIT; +} + +static void update_error_maps(buffer_struct * buff, unsigned int error_offset) +{ + int hard = 0; + TRACE_FUN(ft_t_any); + + if (buff->retry < FT_SOFT_RETRIES) { + buff->soft_error_map |= (1 << error_offset); + } else { + buff->hard_error_map |= (1 << error_offset); + buff->soft_error_map &= ~buff->hard_error_map; + buff->retry = -1; /* will be set to 0 in setup_segment */ + hard = 1; + } + TRACE(ft_t_noise, "sector %d : %s error\n" + KERN_INFO "hard map: 0x%08lx\n" + KERN_INFO "soft map: 0x%08lx", + FT_SECTOR(error_offset), hard ? "hard" : "soft", + (long) buff->hard_error_map, (long) buff->soft_error_map); + TRACE_EXIT; +} + +static void print_progress(buffer_struct *buff, error_cause cause) +{ + TRACE_FUN(ft_t_any); + + switch (cause) { + case no_error: + TRACE(ft_t_flow,"%d Sector(s) transferred", buff->sector_count); + break; + case no_data_error: + TRACE(ft_t_flow, "Sector %d not found", + FT_SECTOR(buff->sector_offset)); + break; + case overrun_error: + /* got an overrun error on the first byte, must be a + * hardware problem + */ + TRACE(ft_t_bug, + "Unexpected error: failing DMA or FDC controller ?"); + break; + case data_crc_error: + TRACE(ft_t_flow, "Error in sector %d", + FT_SECTOR(buff->sector_offset - 1)); + break; + case id_crc_error: + case id_am_error: + case data_am_error: + TRACE(ft_t_flow, "Error in sector %d", + FT_SECTOR(buff->sector_offset)); + break; + default: + TRACE(ft_t_flow, "Unexpected error at sector %d", + FT_SECTOR(buff->sector_offset)); + break; + } + TRACE_EXIT; +} + +/* + * Error cause: Amount xferred: Action: + * + * id_am_error 0 mark bad and skip + * id_crc_error 0 mark bad and skip + * data_am_error 0 mark bad and skip + * data_crc_error % 1024 mark bad and skip + * no_data_error 0 retry on write + * mark bad and skip on read + * overrun_error [ 0..all-1 ] mark bad and skip + * no_error all continue + */ + +/* the arg `sector' is returned by the fdc and tells us at which sector we + * are positioned at (relative to starting sector of segment) + */ +static void determine_verify_progress(buffer_struct *buff, + error_cause cause, + __u8 sector) +{ + TRACE_FUN(ft_t_any); + + if (cause == no_error && sector == 1) { + buff->sector_offset = FT_SECTORS_PER_SEGMENT; + buff->remaining = 0; + if (TRACE_LEVEL >= ft_t_flow) { + print_progress(buff, cause); + } + } else { + buff->sector_offset = sector - buff->sect; + buff->remaining = FT_SECTORS_PER_SEGMENT - buff->sector_offset; + TRACE(ft_t_noise, "%ssector offset: 0x%04x", + (cause == no_error) ? "unexpected " : "", + buff->sector_offset); + switch (cause) { + case overrun_error: + break; +#if 0 + case no_data_error: + buff->retry = FT_SOFT_RETRIES; + if (buff->hard_error_map && + buff->sector_offset > 1 && + (buff->hard_error_map & + (1 << (buff->sector_offset-2)))) { + buff->retry --; + } + break; +#endif + default: + buff->retry = FT_SOFT_RETRIES; + break; + } + if (TRACE_LEVEL >= ft_t_flow) { + print_progress(buff, cause); + } + /* Sector_offset points to the problem area Now adjust + * sector_offset so it always points one past he failing + * sector. I.e. skip the bad sector. + */ + ++buff->sector_offset; + --buff->remaining; + update_error_maps(buff, buff->sector_offset - 1); + } + TRACE_EXIT; +} + +static void determine_progress(buffer_struct *buff, + error_cause cause, + __u8 sector) +{ + unsigned int dma_residue; + TRACE_FUN(ft_t_any); + + /* Using less preferred order of disable_dma and + * get_dma_residue because this seems to fail on at least one + * system if reversed! + */ + dma_residue = get_dma_residue(fdc.dma); + disable_dma(fdc.dma); + if (cause != no_error || dma_residue != 0) { + TRACE(ft_t_noise, "%sDMA residue: 0x%04x", + (cause == no_error) ? "unexpected " : "", + dma_residue); + /* adjust to actual value: */ + if (dma_residue == 0) { + /* this happens sometimes with overrun errors. + * I don't know whether we could ignore the + * overrun error. Play save. + */ + buff->sector_count --; + } else { + buff->sector_count -= ((dma_residue + + (FT_SECTOR_SIZE - 1)) / + FT_SECTOR_SIZE); + } + } + /* Update var's influenced by the DMA operation. + */ + if (buff->sector_count > 0) { + buff->sector_offset += buff->sector_count; + buff->data_offset += buff->sector_count; + buff->ptr += (buff->sector_count * + FT_SECTOR_SIZE); + buff->remaining -= buff->sector_count; + buff->bad_sector_map >>= buff->sector_count; + } + if (TRACE_LEVEL >= ft_t_flow) { + print_progress(buff, cause); + } + if (cause != no_error) { + if (buff->remaining == 0) { + TRACE(ft_t_warn, "foo?\n" + KERN_INFO "count : %d\n" + KERN_INFO "offset: %d\n" + KERN_INFO "soft : %08x\n" + KERN_INFO "hard : %08x", + buff->sector_count, + buff->sector_offset, + buff->soft_error_map, + buff->hard_error_map); + } + /* Sector_offset points to the problem area, except if we got + * a data_crc_error. In that case it points one past the + * failing sector. + * + * Now adjust sector_offset so it always points one past he + * failing sector. I.e. skip the bad sector. + */ + if (cause != data_crc_error) { + skip_bad_sector(buff); + } + update_error_maps(buff, buff->sector_offset - 1); + } + TRACE_EXIT; +} + +static int calc_steps(int cmd) +{ + if (ftape_current_cylinder > cmd) { + return ftape_current_cylinder - cmd; + } else { + return ftape_current_cylinder + cmd; + } +} + +static void pause_tape(int retry, int mode) +{ + int result; + __u8 out[3] = {FDC_SEEK, ft_drive_sel, 0}; + TRACE_FUN(ft_t_any); + + /* We'll use a raw seek command to get the tape to rewind and + * stop for a retry. + */ + ++ft_history.rewinds; + if (qic117_cmds[ftape_current_command].non_intr) { + TRACE(ft_t_warn, "motion command may be issued too soon"); + } + if (retry && (mode == fdc_reading_data || + mode == fdc_reading_id || + mode == fdc_verifying)) { + ftape_current_command = QIC_MICRO_STEP_PAUSE; + ftape_might_be_off_track = 1; + } else { + ftape_current_command = QIC_PAUSE; + } + out[2] = calc_steps(ftape_current_command); + result = fdc_command(out, 3); /* issue QIC_117 command */ + ftape_current_cylinder = out[ 2]; + if (result < 0) { + TRACE(ft_t_noise, "qic-pause failed, status = %d", result); + } else { + ft_location.known = 0; + ft_runner_status = idle; + ft_hide_interrupt = 1; + ftape_tape_running = 0; + } + TRACE_EXIT; +} + +static void continue_xfer(buffer_struct *buff, + fdc_mode_enum mode, + unsigned int skip) +{ + int write = 0; + TRACE_FUN(ft_t_any); + + if (mode == fdc_writing_data || mode == fdc_deleting) { + write = 1; + } + /* This part can be removed if it never happens + */ + if (skip > 0 && + (ft_runner_status != running || + (write && (buff->status != writing)) || + (!write && (buff->status != reading && + buff->status != verifying)))) { + TRACE(ft_t_err, "unexpected runner/buffer state %d/%d", + ft_runner_status, buff->status); + buff->status = error; + /* finish this buffer: */ + (void)ftape_next_buffer(ft_queue_head); + ft_runner_status = aborting; + fdc_mode = fdc_idle; + } else if (buff->remaining > 0 && ftape_calc_next_cluster(buff) > 0) { + /* still sectors left in current segment, continue + * with this segment + */ + if (fdc_setup_read_write(buff, mode) < 0) { + /* failed, abort operation + */ + buff->bytes = buff->ptr - buff->address; + buff->status = error; + /* finish this buffer: */ + (void)ftape_next_buffer(ft_queue_head); + ft_runner_status = aborting; + fdc_mode = fdc_idle; + } + } else { + /* current segment completed + */ + unsigned int last_segment = buff->segment_id; + int eot = ((last_segment + 1) % ft_segments_per_track) == 0; + unsigned int next = buff->next_segment; /* 0 means stop ! */ + + buff->bytes = buff->ptr - buff->address; + buff->status = done; + buff = ftape_next_buffer(ft_queue_head); + if (eot) { + /* finished last segment on current track, + * can't continue + */ + ft_runner_status = logical_eot; + fdc_mode = fdc_idle; + TRACE_EXIT; + } + if (next <= 0) { + /* don't continue with next segment + */ + TRACE(ft_t_noise, "no %s allowed, stopping tape", + (write) ? "write next" : "read ahead"); + pause_tape(0, mode); + ft_runner_status = idle; /* not quite true until + * next irq + */ + TRACE_EXIT; + } + /* continue with next segment + */ + if (buff->status != waiting) { + TRACE(ft_t_noise, "all input buffers %s, pausing tape", + (write) ? "empty" : "full"); + pause_tape(0, mode); + ft_runner_status = idle; /* not quite true until + * next irq + */ + TRACE_EXIT; + } + if (write && next != buff->segment_id) { + TRACE(ft_t_noise, + "segments out of order, aborting write"); + ft_runner_status = do_abort; + fdc_mode = fdc_idle; + TRACE_EXIT; + } + ftape_setup_new_segment(buff, next, 0); + if (stop_read_ahead) { + buff->next_segment = 0; + stop_read_ahead = 0; + } + if (ftape_calc_next_cluster(buff) == 0 || + fdc_setup_read_write(buff, mode) != 0) { + TRACE(ft_t_err, "couldn't start %s-ahead", + write ? "write" : "read"); + ft_runner_status = do_abort; + fdc_mode = fdc_idle; + } else { + /* keep on going */ + switch (ft_driver_state) { + case reading: buff->status = reading; break; + case verifying: buff->status = verifying; break; + case writing: buff->status = writing; break; + case deleting: buff->status = deleting; break; + default: + TRACE(ft_t_err, + "BUG: ft_driver_state %d should be one out of " + "{reading, writing, verifying, deleting}", + ft_driver_state); + buff->status = write ? writing : reading; + break; + } + } + } + TRACE_EXIT; +} + +static void retry_sector(buffer_struct *buff, + int mode, + unsigned int skip) +{ + TRACE_FUN(ft_t_any); + + TRACE(ft_t_noise, "%s error, will retry", + (mode == fdc_writing_data || mode == fdc_deleting) ? "write" : "read"); + pause_tape(1, mode); + ft_runner_status = aborting; + buff->status = error; + buff->skip = skip; + TRACE_EXIT; +} + +static unsigned int find_resume_point(buffer_struct *buff) +{ + int i = 0; + SectorMap mask; + SectorMap map; + TRACE_FUN(ft_t_any); + + /* This function is to be called after all variables have been + * updated to point past the failing sector. + * If there are any soft errors before the failing sector, + * find the first soft error and return the sector offset. + * Otherwise find the last hard error. + * Note: there should always be at least one hard or soft error ! + */ + if (buff->sector_offset < 1 || buff->sector_offset > 32) { + TRACE(ft_t_bug, "BUG: sector_offset = %d", + buff->sector_offset); + TRACE_EXIT 0; + } + if (buff->sector_offset >= 32) { /* C-limitation on shift ! */ + mask = 0xffffffff; + } else { + mask = (1 << buff->sector_offset) - 1; + } + map = buff->soft_error_map & mask; + if (map) { + while ((map & (1 << i)) == 0) { + ++i; + } + TRACE(ft_t_noise, "at sector %d", FT_SECTOR(i)); + } else { + map = buff->hard_error_map & mask; + i = buff->sector_offset - 1; + if (map) { + while ((map & (1 << i)) == 0) { + --i; + } + TRACE(ft_t_noise, "after sector %d", FT_SECTOR(i)); + ++i; /* first sector after last hard error */ + } else { + TRACE(ft_t_bug, "BUG: no soft or hard errors"); + } + } + TRACE_EXIT i; +} + +/* check possible dma residue when formatting, update position record in + * buffer struct. This is, of course, modelled after determine_progress(), but + * we don't need to set up for retries because the format process cannot be + * interrupted (except at the end of the tape track). + */ +static int determine_fmt_progress(buffer_struct *buff, error_cause cause) +{ + unsigned int dma_residue; + TRACE_FUN(ft_t_any); + + /* Using less preferred order of disable_dma and + * get_dma_residue because this seems to fail on at least one + * system if reversed! + */ + dma_residue = get_dma_residue(fdc.dma); + disable_dma(fdc.dma); + if (cause != no_error || dma_residue != 0) { + TRACE(ft_t_info, "DMA residue = 0x%04x", dma_residue); + fdc_mode = fdc_idle; + switch(cause) { + case no_error: + ft_runner_status = aborting; + buff->status = idle; + break; + case overrun_error: + /* got an overrun error on the first byte, must be a + * hardware problem + */ + TRACE(ft_t_bug, + "Unexpected error: failing DMA controller ?"); + ft_runner_status = do_abort; + buff->status = error; + break; + default: + TRACE(ft_t_noise, "Unexpected error at segment %d", + buff->segment_id); + ft_runner_status = do_abort; + buff->status = error; + break; + } + TRACE_EXIT -EIO; /* can only retry entire track in format mode + */ + } + /* Update var's influenced by the DMA operation. + */ + buff->ptr += FT_SECTORS_PER_SEGMENT * 4; + buff->bytes -= FT_SECTORS_PER_SEGMENT * 4; + buff->remaining -= FT_SECTORS_PER_SEGMENT; + buff->segment_id ++; /* done with segment */ + TRACE_EXIT 0; +} + +/* + * Continue formatting, switch buffers if there is no data left in + * current buffer. This is, of course, modelled after + * continue_xfer(), but we don't need to set up for retries because + * the format process cannot be interrupted (except at the end of the + * tape track). + */ +static void continue_formatting(buffer_struct *buff) +{ + TRACE_FUN(ft_t_any); + + if (buff->remaining <= 0) { /* no space left in dma buffer */ + unsigned int next = buff->next_segment; + + if (next == 0) { /* end of tape track */ + buff->status = done; + ft_runner_status = logical_eot; + fdc_mode = fdc_idle; + TRACE(ft_t_noise, "Done formatting track %d", + ft_location.track); + TRACE_EXIT; + } + /* + * switch to next buffer! + */ + buff->status = done; + buff = ftape_next_buffer(ft_queue_head); + + if (buff->status != waiting || next != buff->segment_id) { + goto format_setup_error; + } + } + if (fdc_setup_formatting(buff) < 0) { + goto format_setup_error; + } + buff->status = formatting; + TRACE(ft_t_fdc_dma, "Formatting segment %d on track %d", + buff->segment_id, ft_location.track); + TRACE_EXIT; + format_setup_error: + ft_runner_status = do_abort; + fdc_mode = fdc_idle; + buff->status = error; + TRACE(ft_t_err, "Error setting up for segment %d on track %d", + buff->segment_id, ft_location.track); + TRACE_EXIT; + +} + +/* this handles writing, read id, reading and formatting + */ +static void handle_fdc_busy(buffer_struct *buff) +{ + static int no_data_error_count; + int retry = 0; + error_cause cause; + __u8 in[7]; + int skip; + fdc_mode_enum fmode = fdc_mode; + TRACE_FUN(ft_t_any); + + if (fdc_result(in, 7) < 0) { /* better get it fast ! */ + TRACE(ft_t_err, + "Probably fatal error during FDC Result Phase\n" + KERN_INFO + "drive may hang until (power on) reset :-("); + /* what to do next ???? + */ + TRACE_EXIT; + } + cause = decode_irq_cause(fdc_mode, in); +#ifdef TESTING + { int i; + for (i = 0; i < (int)ft_nr_buffers; ++i) + TRACE(ft_t_any, "buffer[%d] status: %d, segment_id: %d", + i, ft_buffer[i]->status, ft_buffer[i]->segment_id); + } +#endif + if (fmode == fdc_reading_data && ft_driver_state == verifying) { + fmode = fdc_verifying; + } + switch (fmode) { + case fdc_verifying: + if (ft_runner_status == aborting || + ft_runner_status == do_abort) { + TRACE(ft_t_noise,"aborting %s",fdc_mode_txt(fdc_mode)); + break; + } + if (buff->retry > 0) { + TRACE(ft_t_flow, "this is retry nr %d", buff->retry); + } + switch (cause) { + case no_error: + no_data_error_count = 0; + determine_verify_progress(buff, cause, in[5]); + if (in[2] & 0x40) { + /* This should not happen when verifying + */ + TRACE(ft_t_warn, + "deleted data in segment %d/%d", + buff->segment_id, + FT_SECTOR(buff->sector_offset - 1)); + buff->remaining = 0; /* abort transfer */ + buff->hard_error_map = EMPTY_SEGMENT; + skip = 1; + } else { + skip = 0; + } + continue_xfer(buff, fdc_mode, skip); + break; + case no_data_error: + no_data_error_count ++; + case overrun_error: + retry ++; + case id_am_error: + case id_crc_error: + case data_am_error: + case data_crc_error: + determine_verify_progress(buff, cause, in[5]); + if (cause == no_data_error) { + if (no_data_error_count >= 2) { + TRACE(ft_t_warn, + "retrying because of successive " + "no data errors"); + no_data_error_count = 0; + } else { + retry --; + } + } else { + no_data_error_count = 0; + } + if (retry) { + skip = find_resume_point(buff); + } else { + skip = buff->sector_offset; + } + if (retry && skip < 32) { + retry_sector(buff, fdc_mode, skip); + } else { + continue_xfer(buff, fdc_mode, skip); + } + update_history(cause); + break; + default: + /* Don't know why this could happen + * but find out. + */ + determine_verify_progress(buff, cause, in[5]); + retry_sector(buff, fdc_mode, 0); + TRACE(ft_t_err, "Error: unexpected error"); + break; + } + break; + case fdc_reading_data: +#ifdef TESTING + /* I'm sorry, but: NOBODY ever used this trace + * messages for ages. I guess that Bas was the last person + * that ever really used this (thank you, between the lines) + */ + if (cause == no_error) { + TRACE(ft_t_flow,"reading segment %d",buff->segment_id); + } else { + TRACE(ft_t_noise, "error reading segment %d", + buff->segment_id); + TRACE(ft_t_noise, "\n" + KERN_INFO + "IRQ:C: 0x%02x, H: 0x%02x, R: 0x%02x, N: 0x%02x\n" + KERN_INFO + "BUF:C: 0x%02x, H: 0x%02x, R: 0x%02x", + in[3], in[4], in[5], in[6], + buff->cyl, buff->head, buff->sect); + } +#endif + if (ft_runner_status == aborting || + ft_runner_status == do_abort) { + TRACE(ft_t_noise,"aborting %s",fdc_mode_txt(fdc_mode)); + break; + } + if (buff->bad_sector_map == FAKE_SEGMENT) { + /* This condition occurs when reading a `fake' + * sector that's not accessible. Doesn't + * really matter as we would have ignored it + * anyway ! + * + * Chance is that we're past the next segment + * now, so the next operation may fail and + * result in a retry. + */ + buff->remaining = 0; /* skip failing sector */ + /* buff->ptr = buff->address; */ + /* fake success: */ + continue_xfer(buff, fdc_mode, 1); + /* trace calls are expensive: place them AFTER + * the real stuff has been done. + * + */ + TRACE(ft_t_noise, "skipping empty segment %d (read), size? %d", + buff->segment_id, buff->ptr - buff->address); + TRACE_EXIT; + } + if (buff->retry > 0) { + TRACE(ft_t_flow, "this is retry nr %d", buff->retry); + } + switch (cause) { + case no_error: + determine_progress(buff, cause, in[5]); + if (in[2] & 0x40) { + /* Handle deleted data in header segments. + * Skip segment and force read-ahead. + */ + TRACE(ft_t_warn, + "deleted data in segment %d/%d", + buff->segment_id, + FT_SECTOR(buff->sector_offset - 1)); + buff->deleted = 1; + buff->remaining = 0;/*abort transfer */ + buff->soft_error_map |= + (-1L << buff->sector_offset); + if (buff->segment_id == 0) { + /* stop on next segment */ + stop_read_ahead = 1; + } + /* force read-ahead: */ + buff->next_segment = + buff->segment_id + 1; + skip = (FT_SECTORS_PER_SEGMENT - + buff->sector_offset); + } else { + skip = 0; + } + continue_xfer(buff, fdc_mode, skip); + break; + case no_data_error: + /* Tape started too far ahead of or behind the + * right sector. This may also happen in the + * middle of a segment ! + * + * Handle no-data as soft error. If next + * sector fails too, a retry (with needed + * reposition) will follow. + */ + retry ++; + case id_am_error: + case id_crc_error: + case data_am_error: + case data_crc_error: + case overrun_error: + retry += (buff->soft_error_map != 0 || + buff->hard_error_map != 0); + determine_progress(buff, cause, in[5]); +#if 1 || defined(TESTING) + if (cause == overrun_error) retry ++; +#endif + if (retry) { + skip = find_resume_point(buff); + } else { + skip = buff->sector_offset; + } + /* Try to resume with next sector on single + * errors (let ecc correct it), but retry on + * no_data (we'll be past the target when we + * get here so we cannot retry) or on + * multiple errors (reduce chance on ecc + * failure). + */ + /* cH: 23/02/97: if the last sector in the + * segment was a hard error, then there is + * no sense in a retry. This occasion seldom + * occurs but ... @:³²¸`@%&§$ + */ + if (retry && skip < 32) { + retry_sector(buff, fdc_mode, skip); + } else { + continue_xfer(buff, fdc_mode, skip); + } + update_history(cause); + break; + default: + /* Don't know why this could happen + * but find out. + */ + determine_progress(buff, cause, in[5]); + retry_sector(buff, fdc_mode, 0); + TRACE(ft_t_err, "Error: unexpected error"); + break; + } + break; + case fdc_reading_id: + if (cause == no_error) { + fdc_cyl = in[3]; + fdc_head = in[4]; + fdc_sect = in[5]; + TRACE(ft_t_fdc_dma, + "id read: C: 0x%02x, H: 0x%02x, R: 0x%02x", + fdc_cyl, fdc_head, fdc_sect); + } else { /* no valid information, use invalid sector */ + fdc_cyl = fdc_head = fdc_sect = 0; + TRACE(ft_t_flow, "Didn't find valid sector Id"); + } + fdc_mode = fdc_idle; + break; + case fdc_deleting: + case fdc_writing_data: +#ifdef TESTING + if (cause == no_error) { + TRACE(ft_t_flow, "writing segment %d", buff->segment_id); + } else { + TRACE(ft_t_noise, "error writing segment %d", + buff->segment_id); + } +#endif + if (ft_runner_status == aborting || + ft_runner_status == do_abort) { + TRACE(ft_t_flow, "aborting %s",fdc_mode_txt(fdc_mode)); + break; + } + if (buff->retry > 0) { + TRACE(ft_t_flow, "this is retry nr %d", buff->retry); + } + if (buff->bad_sector_map == FAKE_SEGMENT) { + /* This condition occurs when trying to write to a + * `fake' sector that's not accessible. Doesn't really + * matter as it isn't used anyway ! Might be located + * at wrong segment, then we'll fail on the next + * segment. + */ + TRACE(ft_t_noise, "skipping empty segment (write)"); + buff->remaining = 0; /* skip failing sector */ + /* fake success: */ + continue_xfer(buff, fdc_mode, 1); + break; + } + switch (cause) { + case no_error: + determine_progress(buff, cause, in[5]); + continue_xfer(buff, fdc_mode, 0); + break; + case no_data_error: + case id_am_error: + case id_crc_error: + case data_am_error: + case overrun_error: + update_history(cause); + determine_progress(buff, cause, in[5]); + skip = find_resume_point(buff); + retry_sector(buff, fdc_mode, skip); + break; + default: + if (in[1] & 0x02) { + TRACE(ft_t_err, "media not writable"); + } else { + TRACE(ft_t_bug, "unforeseen write error"); + } + fdc_mode = fdc_idle; + break; + } + break; /* fdc_deleting || fdc_writing_data */ + case fdc_formatting: + /* The interrupt comes after formatting a segment. We then + * have to set up QUICKLY for the next segment. But + * afterwards, there is plenty of time. + */ + switch (cause) { + case no_error: + /* would like to keep most of the formatting stuff + * outside the isr code, but timing is too critical + */ + if (determine_fmt_progress(buff, cause) >= 0) { + continue_formatting(buff); + } + break; + case no_data_error: + case id_am_error: + case id_crc_error: + case data_am_error: + case overrun_error: + default: + determine_fmt_progress(buff, cause); + update_history(cause); + if (in[1] & 0x02) { + TRACE(ft_t_err, "media not writable"); + } else { + TRACE(ft_t_bug, "unforeseen write error"); + } + break; + } /* cause */ + break; + default: + TRACE(ft_t_warn, "Warning: unexpected irq during: %s", + fdc_mode_txt(fdc_mode)); + fdc_mode = fdc_idle; + break; + } + TRACE_EXIT; +} + +/* FDC interrupt service routine. + */ +void fdc_isr(void) +{ + static int isr_active; +#ifdef TESTING + unsigned int t0 = ftape_timestamp(); +#endif + TRACE_FUN(ft_t_any); + + if (isr_active++) { + --isr_active; + TRACE(ft_t_bug, "BUG: nested interrupt, not good !"); + *fdc.hook = fdc_isr; /* hook our handler into the fdc + * code again + */ + TRACE_EXIT; + } + sti(); + if (inb_p(fdc.msr) & FDC_BUSY) { /* Entering Result Phase */ + ft_hide_interrupt = 0; + handle_fdc_busy(ftape_get_buffer(ft_queue_head)); + if (ft_runner_status == do_abort) { + /* cease operation, remember tape position + */ + TRACE(ft_t_flow, "runner aborting"); + ft_runner_status = aborting; + ++ft_expected_stray_interrupts; + } + } else { /* !FDC_BUSY */ + /* clear interrupt, cause should be gotten by issuing + * a Sense Interrupt Status command. + */ + if (fdc_mode == fdc_recalibrating || fdc_mode == fdc_seeking) { + if (ft_hide_interrupt) { + int st0; + int pcn; + + if (fdc_sense_interrupt_status(&st0, &pcn) < 0) + TRACE(ft_t_err, + "sense interrupt status failed"); + ftape_current_cylinder = pcn; + TRACE(ft_t_flow, "handled hidden interrupt"); + } + ft_seek_completed = 1; + fdc_mode = fdc_idle; + } else if (!waitqueue_active(&ftape_wait_intr)) { + if (ft_expected_stray_interrupts == 0) { + TRACE(ft_t_warn, "unexpected stray interrupt"); + } else { + TRACE(ft_t_flow, "expected stray interrupt"); + --ft_expected_stray_interrupts; + } + } else { + if (fdc_mode == fdc_reading_data || + fdc_mode == fdc_verifying || + fdc_mode == fdc_writing_data || + fdc_mode == fdc_deleting || + fdc_mode == fdc_formatting || + fdc_mode == fdc_reading_id) { + if (inb_p(fdc.msr) & FDC_BUSY) { + TRACE(ft_t_bug, + "***** FDC failure, busy too late"); + } else { + TRACE(ft_t_bug, + "***** FDC failure, no busy"); + } + } else { + TRACE(ft_t_fdc_dma, "awaited stray interrupt"); + } + } + ft_hide_interrupt = 0; + } + /* Handle sleep code. + */ + if (!ft_hide_interrupt) { + ft_interrupt_seen ++; + if (waitqueue_active(&ftape_wait_intr)) { + wake_up_interruptible(&ftape_wait_intr); + } + } else { + TRACE(ft_t_flow, "hiding interrupt while %s", + waitqueue_active(&ftape_wait_intr) ? "waiting":"active"); + } +#ifdef TESTING + t0 = ftape_timediff(t0, ftape_timestamp()); + if (t0 >= 1000) { + /* only tell us about long calls */ + TRACE(ft_t_noise, "isr() duration: %5d usec", t0); + } +#endif + *fdc.hook = fdc_isr; /* hook our handler into the fdc code again */ + --isr_active; + TRACE_EXIT; +} diff --git a/drivers/char/ftape/lowlevel/fdc-isr.h b/drivers/char/ftape/lowlevel/fdc-isr.h new file mode 100644 index 000000000000..065aa978942d --- /dev/null +++ b/drivers/char/ftape/lowlevel/fdc-isr.h @@ -0,0 +1,55 @@ +#ifndef _FDC_ISR_H +#define _FDC_ISR_H + +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/fdc-isr.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:07 $ + * + * This file declares the global variables necessary to + * synchronize the interrupt service routine (isr) with the + * remainder of the QIC-40/80/3010/3020 floppy-tape driver + * "ftape" for Linux. + */ + +/* + * fdc-isr.c defined public variables + */ +extern volatile int ft_expected_stray_interrupts; /* masks stray interrupts */ +extern volatile int ft_seek_completed; /* flag set by isr */ +extern volatile int ft_interrupt_seen; /* flag set by isr */ +extern volatile int ft_hide_interrupt; /* flag set by isr */ + +/* + * fdc-io.c defined public functions + */ +extern void fdc_isr(void); + +/* + * A kernel hook that steals one interrupt from the floppy + * driver (Should be fixed when the new fdc driver gets ready) + * See the linux kernel source files: + * drivers/block/floppy.c & drivers/block/blk.h + * for the details. + */ +extern void (*do_floppy) (void); + +#endif diff --git a/drivers/char/ftape/lowlevel/ftape-bsm.c b/drivers/char/ftape/lowlevel/ftape-bsm.c new file mode 100644 index 000000000000..d1a301cc344f --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-bsm.c @@ -0,0 +1,491 @@ +/* + * Copyright (C) 1994-1996 Bas Laarhoven, + * (C) 1996-1997 Claus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-bsm.c,v $ + * $Revision: 1.3 $ + * $Date: 1997/10/05 19:15:15 $ + * + * This file contains the bad-sector map handling code for + * the QIC-117 floppy tape driver for Linux. + * QIC-40, QIC-80, QIC-3010 and QIC-3020 maps are implemented. + */ + +#include <linux/string.h> + +#include <linux/ftape.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-bsm.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-rw.h" + +/* Global vars. + */ + +/* Local vars. + */ +static __u8 *bad_sector_map; +static SectorCount *bsm_hash_ptr; + +typedef enum { + forward, backward +} mode_type; + +#if 0 +static void ftape_put_bad_sector_entry(int segment_id, SectorMap new_map); +#endif + +#if 0 +/* fix_tape converts a normal QIC-80 tape into a 'wide' tape. + * For testing purposes only ! + */ +void fix_tape(__u8 * buffer, ft_format_type new_code) +{ + static __u8 list[BAD_SECTOR_MAP_SIZE]; + SectorMap *src_ptr = (SectorMap *) list; + __u8 *dst_ptr = bad_sector_map; + SectorMap map; + unsigned int sector = 1; + int i; + + if (format_code != fmt_var && format_code != fmt_big) { + memcpy(list, bad_sector_map, sizeof(list)); + memset(bad_sector_map, 0, sizeof(bad_sector_map)); + while ((__u8 *) src_ptr - list < sizeof(list)) { + map = *src_ptr++; + if (map == EMPTY_SEGMENT) { + *(SectorMap *) dst_ptr = 0x800000 + sector; + dst_ptr += 3; + sector += SECTORS_PER_SEGMENT; + } else { + for (i = 0; i < SECTORS_PER_SEGMENT; ++i) { + if (map & 1) { + *(SewctorMap *) dst_ptr = sector; + dst_ptr += 3; + } + map >>= 1; + ++sector; + } + } + } + } + bad_sector_map_changed = 1; + *(buffer + 4) = new_code; /* put new format code */ + if (format_code != fmt_var && new_code == fmt_big) { + PUT4(buffer, FT_6_HSEG_1, (__u32)GET2(buffer, 6)); + PUT4(buffer, FT_6_HSEG_2, (__u32)GET2(buffer, 8)); + PUT4(buffer, FT_6_FRST_SEG, (__u32)GET2(buffer, 10)); + PUT4(buffer, FT_6_LAST_SEG, (__u32)GET2(buffer, 12)); + memset(buffer+6, '\0', 8); + } + format_code = new_code; +} + +#endif + +/* given buffer that contains a header segment, find the end of + * of the bsm list + */ +__u8 * ftape_find_end_of_bsm_list(__u8 * address) +{ + __u8 *ptr = address + FT_HEADER_END; /* start of bsm list */ + __u8 *limit = address + FT_SEGMENT_SIZE; + while (ptr + 2 < limit) { + if (ptr[0] || ptr[1] || ptr[2]) { + ptr += 3; + } else { + return ptr; + } + } + return NULL; +} + +static inline void put_sector(SectorCount *ptr, unsigned int sector) +{ + ptr->bytes[0] = sector & 0xff; + sector >>= 8; + ptr->bytes[1] = sector & 0xff; + sector >>= 8; + ptr->bytes[2] = sector & 0xff; +} + +static inline unsigned int get_sector(SectorCount *ptr) +{ +#if 1 + unsigned int sector; + + sector = ptr->bytes[0]; + sector += ptr->bytes[1] << 8; + sector += ptr->bytes[2] << 16; + + return sector; +#else + /* GET4 gets the next four bytes in Intel little endian order + * and converts them to host byte order and handles unaligned + * access. + */ + return (GET4(ptr, 0) & 0x00ffffff); /* back to host byte order */ +#endif +} + +static void bsm_debug_fake(void) +{ + /* for testing of bad sector handling at end of tape + */ +#if 0 + ftape_put_bad_sector_entry(segments_per_track * tracks_per_tape - 3, + 0x000003e0; + ftape_put_bad_sector_entry(segments_per_track * tracks_per_tape - 2, + 0xff3fffff; + ftape_put_bad_sector_entry(segments_per_track * tracks_per_tape - 1, + 0xffffe000; +#endif + /* Enable to test bad sector handling + */ +#if 0 + ftape_put_bad_sector_entry(30, 0xfffffffe) + ftape_put_bad_sector_entry(32, 0x7fffffff); + ftape_put_bad_sector_entry(34, 0xfffeffff); + ftape_put_bad_sector_entry(36, 0x55555555); + ftape_put_bad_sector_entry(38, 0xffffffff); + ftape_put_bad_sector_entry(50, 0xffff0000); + ftape_put_bad_sector_entry(51, 0xffffffff); + ftape_put_bad_sector_entry(52, 0xffffffff); + ftape_put_bad_sector_entry(53, 0x0000ffff); +#endif + /* Enable when testing multiple volume tar dumps. + */ +#if 0 + { + int i; + + for (i = ft_first_data_segment; + i <= ft_last_data_segment - 7; ++i) { + ftape_put_bad_sector_entry(i, EMPTY_SEGMENT); + } + } +#endif + /* Enable when testing bit positions in *_error_map + */ +#if 0 + { + int i; + + for (i = first_data_segment; i <= last_data_segment; ++i) { + ftape_put_bad_sector_entry(i, + ftape_get_bad_sector_entry(i) + | 0x00ff00ff); + } + } +#endif +} + +static void print_bad_sector_map(void) +{ + unsigned int good_sectors; + unsigned int total_bad = 0; + int i; + TRACE_FUN(ft_t_flow); + + if (ft_format_code == fmt_big || + ft_format_code == fmt_var || + ft_format_code == fmt_1100ft) { + SectorCount *ptr = (SectorCount *)bad_sector_map; + unsigned int sector; + __u16 *ptr16; + + while((sector = get_sector(ptr++)) != 0) { + if ((ft_format_code == fmt_big || + ft_format_code == fmt_var) && + sector & 0x800000) { + total_bad += FT_SECTORS_PER_SEGMENT - 3; + TRACE(ft_t_noise, "bad segment at sector: %6d", + sector & 0x7fffff); + } else { + ++total_bad; + TRACE(ft_t_noise, "bad sector: %6d", sector); + } + } + /* Display old ftape's end-of-file marks + */ + ptr16 = (__u16*)ptr; + while ((sector = get_unaligned(ptr16++)) != 0) { + TRACE(ft_t_noise, "Old ftape eof mark: %4d/%2d", + sector, get_unaligned(ptr16++)); + } + } else { /* fixed size format */ + for (i = ft_first_data_segment; + i < (int)(ft_segments_per_track * ft_tracks_per_tape); ++i) { + SectorMap map = ((SectorMap *) bad_sector_map)[i]; + + if (map) { + TRACE(ft_t_noise, + "bsm for segment %4d: 0x%08x", i, (unsigned int)map); + total_bad += ((map == EMPTY_SEGMENT) + ? FT_SECTORS_PER_SEGMENT - 3 + : count_ones(map)); + } + } + } + good_sectors = + ((ft_segments_per_track * ft_tracks_per_tape - ft_first_data_segment) + * (FT_SECTORS_PER_SEGMENT - 3)) - total_bad; + TRACE(ft_t_info, "%d Kb usable on this tape", good_sectors); + if (total_bad == 0) { + TRACE(ft_t_info, + "WARNING: this tape has no bad blocks registered !"); + } else { + TRACE(ft_t_info, "%d bad sectors", total_bad); + } + TRACE_EXIT; +} + + +void ftape_extract_bad_sector_map(__u8 * buffer) +{ + TRACE_FUN(ft_t_any); + + /* Fill the bad sector map with the contents of buffer. + */ + if (ft_format_code == fmt_var || ft_format_code == fmt_big) { + /* QIC-3010/3020 and wide QIC-80 tapes no longer have a failed + * sector log but use this area to extend the bad sector map. + */ + bad_sector_map = &buffer[FT_HEADER_END]; + } else { + /* non-wide QIC-80 tapes have a failed sector log area that + * mustn't be included in the bad sector map. + */ + bad_sector_map = &buffer[FT_FSL + FT_FSL_SIZE]; + } + if (ft_format_code == fmt_1100ft || + ft_format_code == fmt_var || + ft_format_code == fmt_big) { + bsm_hash_ptr = (SectorCount *)bad_sector_map; + } else { + bsm_hash_ptr = NULL; + } + bsm_debug_fake(); + if (TRACE_LEVEL >= ft_t_info) { + print_bad_sector_map(); + } + TRACE_EXIT; +} + +static inline SectorMap cvt2map(unsigned int sector) +{ + return 1 << (((sector & 0x7fffff) - 1) % FT_SECTORS_PER_SEGMENT); +} + +static inline int cvt2segment(unsigned int sector) +{ + return ((sector & 0x7fffff) - 1) / FT_SECTORS_PER_SEGMENT; +} + +static int forward_seek_entry(int segment_id, + SectorCount **ptr, + SectorMap *map) +{ + unsigned int sector; + int segment; + + do { + sector = get_sector((*ptr)++); + segment = cvt2segment(sector); + } while (sector != 0 && segment < segment_id); + (*ptr) --; /* point to first sector >= segment_id */ + /* Get all sectors in segment_id + */ + if (sector == 0 || segment != segment_id) { + *map = 0; + return 0; + } else if ((sector & 0x800000) && + (ft_format_code == fmt_var || ft_format_code == fmt_big)) { + *map = EMPTY_SEGMENT; + return FT_SECTORS_PER_SEGMENT; + } else { + int count = 1; + SectorCount *tmp_ptr = (*ptr) + 1; + + *map = cvt2map(sector); + while ((sector = get_sector(tmp_ptr++)) != 0 && + (segment = cvt2segment(sector)) == segment_id) { + *map |= cvt2map(sector); + ++count; + } + return count; + } +} + +static int backwards_seek_entry(int segment_id, + SectorCount **ptr, + SectorMap *map) +{ + unsigned int sector; + int segment; /* max unsigned int */ + + if (*ptr <= (SectorCount *)bad_sector_map) { + *map = 0; + return 0; + } + do { + sector = get_sector(--(*ptr)); + segment = cvt2segment(sector); + } while (*ptr > (SectorCount *)bad_sector_map && segment > segment_id); + if (segment > segment_id) { /* at start of list, no entry found */ + *map = 0; + return 0; + } else if (segment < segment_id) { + /* before smaller entry, adjust for overshoot */ + (*ptr) ++; + *map = 0; + return 0; + } else if ((sector & 0x800000) && + (ft_format_code == fmt_big || ft_format_code == fmt_var)) { + *map = EMPTY_SEGMENT; + return FT_SECTORS_PER_SEGMENT; + } else { /* get all sectors in segment_id */ + int count = 1; + + *map = cvt2map(sector); + while(*ptr > (SectorCount *)bad_sector_map) { + sector = get_sector(--(*ptr)); + segment = cvt2segment(sector); + if (segment != segment_id) { + break; + } + *map |= cvt2map(sector); + ++count; + } + if (segment < segment_id) { + (*ptr) ++; + } + return count; + } +} + +#if 0 +static void ftape_put_bad_sector_entry(int segment_id, SectorMap new_map) +{ + SectorCount *ptr = (SectorCount *)bad_sector_map; + int count; + int new_count; + SectorMap map; + TRACE_FUN(ft_t_any); + + if (ft_format_code == fmt_1100ft || + ft_format_code == fmt_var || + ft_format_code == fmt_big) { + count = forward_seek_entry(segment_id, &ptr, &map); + new_count = count_ones(new_map); + /* If format code == 4 put empty segment instead of 32 + * bad sectors. + */ + if (ft_format_code == fmt_var || ft_format_code == fmt_big) { + if (new_count == FT_SECTORS_PER_SEGMENT) { + new_count = 1; + } + if (count == FT_SECTORS_PER_SEGMENT) { + count = 1; + } + } + if (count != new_count) { + /* insert (or delete if < 0) new_count - count + * entries. Move trailing part of list + * including terminating 0. + */ + SectorCount *hi_ptr = ptr; + + do { + } while (get_sector(hi_ptr++) != 0); + /* Note: ptr is of type byte *, and each bad sector + * consumes 3 bytes. + */ + memmove(ptr + new_count, ptr + count, + (size_t)(hi_ptr - (ptr + count))*sizeof(SectorCount)); + } + TRACE(ft_t_noise, "putting map 0x%08x at %p, segment %d", + (unsigned int)new_map, ptr, segment_id); + if (new_count == 1 && new_map == EMPTY_SEGMENT) { + put_sector(ptr++, (0x800001 + + segment_id * + FT_SECTORS_PER_SEGMENT)); + } else { + int i = 0; + + while (new_map) { + if (new_map & 1) { + put_sector(ptr++, + 1 + segment_id * + FT_SECTORS_PER_SEGMENT + i); + } + ++i; + new_map >>= 1; + } + } + } else { + ((SectorMap *) bad_sector_map)[segment_id] = new_map; + } + TRACE_EXIT; +} +#endif /* 0 */ + +SectorMap ftape_get_bad_sector_entry(int segment_id) +{ + if (ft_used_header_segment == -1) { + /* When reading header segment we'll need a blank map. + */ + return 0; + } else if (bsm_hash_ptr != NULL) { + /* Invariants: + * map - mask value returned on last call. + * bsm_hash_ptr - points to first sector greater or equal to + * first sector in last_referenced segment. + * last_referenced - segment id used in the last call, + * sector and map belong to this id. + * This code is designed for sequential access and retries. + * For true random access it may have to be redesigned. + */ + static int last_reference = -1; + static SectorMap map; + + if (segment_id > last_reference) { + /* Skip all sectors before segment_id + */ + forward_seek_entry(segment_id, &bsm_hash_ptr, &map); + } else if (segment_id < last_reference) { + /* Skip backwards until begin of buffer or + * first sector in segment_id + */ + backwards_seek_entry(segment_id, &bsm_hash_ptr, &map); + } /* segment_id == last_reference : keep map */ + last_reference = segment_id; + return map; + } else { + return ((SectorMap *) bad_sector_map)[segment_id]; + } +} + +/* This is simply here to prevent us from overwriting other kernel + * data. Writes will result in NULL Pointer dereference. + */ +void ftape_init_bsm(void) +{ + bad_sector_map = NULL; + bsm_hash_ptr = NULL; +} diff --git a/drivers/char/ftape/lowlevel/ftape-bsm.h b/drivers/char/ftape/lowlevel/ftape-bsm.h new file mode 100644 index 000000000000..ed45465af4d4 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-bsm.h @@ -0,0 +1,66 @@ +#ifndef _FTAPE_BSM_H +#define _FTAPE_BSM_H + +/* + * Copyright (C) 1994-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-bsm.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:07 $ + * + * This file contains definitions for the bad sector map handling + * routines for the QIC-117 floppy-tape driver for Linux. + */ + +#include <linux/ftape.h> +#include <linux/ftape-header-segment.h> + +#define EMPTY_SEGMENT (0xffffffff) +#define FAKE_SEGMENT (0xfffffffe) + +/* maximum (format code 4) bad sector map size (bytes). + */ +#define BAD_SECTOR_MAP_SIZE (29 * SECTOR_SIZE - 256) + +/* format code 4 bad sector entry, ftape uses this + * internally for all format codes + */ +typedef __u32 SectorMap; +/* variable and 1100 ft bad sector map entry. These three bytes represent + * a single sector address measured from BOT. + */ +typedef struct NewSectorMap { + __u8 bytes[3]; +} SectorCount; + + +/* + * ftape-bsm.c defined global vars. + */ + +/* + * ftape-bsm.c defined global functions. + */ +extern void update_bad_sector_map(__u8 * buffer); +extern void ftape_extract_bad_sector_map(__u8 * buffer); +extern SectorMap ftape_get_bad_sector_entry(int segment_id); +extern __u8 *ftape_find_end_of_bsm_list(__u8 * address); +extern void ftape_init_bsm(void); + +#endif diff --git a/drivers/char/ftape/lowlevel/ftape-buffer.c b/drivers/char/ftape/lowlevel/ftape-buffer.c new file mode 100644 index 000000000000..54af20cd9a2c --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-buffer.c @@ -0,0 +1,129 @@ +/* + * Copyright (C) 1997 Claus-Justus Heine + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-buffer.c,v $ + * $Revision: 1.3 $ + * $Date: 1997/10/16 23:33:11 $ + * + * This file contains the allocator/dealloctor for ftape's dynamic dma + * buffer. + */ + +#include <linux/slab.h> +#include <linux/mm.h> +#include <linux/mman.h> +#include <asm/dma.h> + +#include <linux/ftape.h> +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-read.h" +#include "../lowlevel/ftape-tracing.h" + +/* DMA'able memory allocation stuff. + */ + +static inline void *dmaalloc(size_t size) +{ + unsigned long addr; + + if (size == 0) { + return NULL; + } + addr = __get_dma_pages(GFP_KERNEL, get_order(size)); + if (addr) { + struct page *page; + + for (page = virt_to_page(addr); page < virt_to_page(addr+size); page++) + SetPageReserved(page); + } + return (void *)addr; +} + +static inline void dmafree(void *addr, size_t size) +{ + if (size > 0) { + struct page *page; + + for (page = virt_to_page((unsigned long)addr); + page < virt_to_page((unsigned long)addr+size); page++) + ClearPageReserved(page); + free_pages((unsigned long) addr, get_order(size)); + } +} + +static int add_one_buffer(void) +{ + TRACE_FUN(ft_t_flow); + + if (ft_nr_buffers >= FT_MAX_NR_BUFFERS) { + TRACE_EXIT -ENOMEM; + } + ft_buffer[ft_nr_buffers] = kmalloc(sizeof(buffer_struct), GFP_KERNEL); + if (ft_buffer[ft_nr_buffers] == NULL) { + TRACE_EXIT -ENOMEM; + } + memset(ft_buffer[ft_nr_buffers], 0, sizeof(buffer_struct)); + ft_buffer[ft_nr_buffers]->address = dmaalloc(FT_BUFF_SIZE); + if (ft_buffer[ft_nr_buffers]->address == NULL) { + kfree(ft_buffer[ft_nr_buffers]); + ft_buffer[ft_nr_buffers] = NULL; + TRACE_EXIT -ENOMEM; + } + ft_nr_buffers ++; + TRACE(ft_t_info, "buffer nr #%d @ %p, dma area @ %p", + ft_nr_buffers, + ft_buffer[ft_nr_buffers-1], + ft_buffer[ft_nr_buffers-1]->address); + TRACE_EXIT 0; +} + +static void del_one_buffer(void) +{ + TRACE_FUN(ft_t_flow); + if (ft_nr_buffers > 0) { + TRACE(ft_t_info, "releasing buffer nr #%d @ %p, dma area @ %p", + ft_nr_buffers, + ft_buffer[ft_nr_buffers-1], + ft_buffer[ft_nr_buffers-1]->address); + ft_nr_buffers --; + dmafree(ft_buffer[ft_nr_buffers]->address, FT_BUFF_SIZE); + kfree(ft_buffer[ft_nr_buffers]); + ft_buffer[ft_nr_buffers] = NULL; + } + TRACE_EXIT; +} + +int ftape_set_nr_buffers(int cnt) +{ + int delta = cnt - ft_nr_buffers; + TRACE_FUN(ft_t_flow); + + if (delta > 0) { + while (delta--) { + if (add_one_buffer() < 0) { + TRACE_EXIT -ENOMEM; + } + } + } else if (delta < 0) { + while (delta++) { + del_one_buffer(); + } + } + ftape_zap_read_buffers(); + TRACE_EXIT 0; +} diff --git a/drivers/char/ftape/lowlevel/ftape-buffer.h b/drivers/char/ftape/lowlevel/ftape-buffer.h new file mode 100644 index 000000000000..eec99cee8f82 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-buffer.h @@ -0,0 +1,32 @@ +#ifndef _FTAPE_BUFFER_H +#define _FTAPE_BUFFER_H + +/* + * Copyright (C) 1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-buffer.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:08 $ + * + * This file contains the allocator/dealloctor for ftape's dynamic dma + * buffer. + */ + +extern int ftape_set_nr_buffers(int cnt); + +#endif diff --git a/drivers/char/ftape/lowlevel/ftape-calibr.c b/drivers/char/ftape/lowlevel/ftape-calibr.c new file mode 100644 index 000000000000..956b2586e138 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-calibr.c @@ -0,0 +1,276 @@ +/* + * Copyright (C) 1993-1996 Bas Laarhoven. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-calibr.c,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:08 $ + * + * GP calibration routine for processor speed dependent + * functions. + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/jiffies.h> +#include <asm/system.h> +#include <asm/io.h> +#if defined(__alpha__) +# include <asm/hwrpb.h> +#elif defined(__x86_64__) +# include <asm/msr.h> +# include <asm/timex.h> +#elif defined(__i386__) +# include <linux/timex.h> +#endif +#include <linux/ftape.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-calibr.h" +#include "../lowlevel/fdc-io.h" + +#undef DEBUG + +#if !defined(__alpha__) && !defined(__i386__) && !defined(__x86_64__) +# error Ftape is not implemented for this architecture! +#endif + +#if defined(__alpha__) || defined(__x86_64__) +static unsigned long ps_per_cycle = 0; +#endif + +static spinlock_t calibr_lock; + +/* + * Note: On Intel PCs, the clock ticks at 100 Hz (HZ==100) which is + * too slow for certain timeouts (and that clock doesn't even tick + * when interrupts are disabled). For that reason, the 8254 timer is + * used directly to implement fine-grained timeouts. However, on + * Alpha PCs, the 8254 is *not* used to implement the clock tick + * (which is 1024 Hz, normally) and the 8254 timer runs at some + * "random" frequency (it seems to run at 18Hz, but it's not safe to + * rely on this value). Instead, we use the Alpha's "rpcc" + * instruction to read cycle counts. As this is a 32 bit counter, + * it will overflow only once per 30 seconds (on a 200MHz machine), + * which is plenty. + */ + +unsigned int ftape_timestamp(void) +{ +#if defined(__alpha__) + unsigned long r; + + asm volatile ("rpcc %0" : "=r" (r)); + return r; +#elif defined(__x86_64__) + unsigned long r; + rdtscl(r); + return r; +#elif defined(__i386__) + +/* + * Note that there is some time between counter underflowing and jiffies + * increasing, so the code below won't always give correct output. + * -Vojtech + */ + + unsigned long flags; + __u16 lo; + __u16 hi; + + spin_lock_irqsave(&calibr_lock, flags); + outb_p(0x00, 0x43); /* latch the count ASAP */ + lo = inb_p(0x40); /* read the latched count */ + lo |= inb(0x40) << 8; + hi = jiffies; + spin_unlock_irqrestore(&calibr_lock, flags); + return ((hi + 1) * (unsigned int) LATCH) - lo; /* downcounter ! */ +#endif +} + +static unsigned int short_ftape_timestamp(void) +{ +#if defined(__alpha__) || defined(__x86_64__) + return ftape_timestamp(); +#elif defined(__i386__) + unsigned int count; + unsigned long flags; + + spin_lock_irqsave(&calibr_lock, flags); + outb_p(0x00, 0x43); /* latch the count ASAP */ + count = inb_p(0x40); /* read the latched count */ + count |= inb(0x40) << 8; + spin_unlock_irqrestore(&calibr_lock, flags); + return (LATCH - count); /* normal: downcounter */ +#endif +} + +static unsigned int diff(unsigned int t0, unsigned int t1) +{ +#if defined(__alpha__) || defined(__x86_64__) + return (t1 - t0); +#elif defined(__i386__) + /* + * This is tricky: to work for both short and full ftape_timestamps + * we'll have to discriminate between these. + * If it _looks_ like short stamps with wrapping around we'll + * asume it are. This will generate a small error if it really + * was a (very large) delta from full ftape_timestamps. + */ + return (t1 <= t0 && t0 <= LATCH) ? t1 + LATCH - t0 : t1 - t0; +#endif +} + +static unsigned int usecs(unsigned int count) +{ +#if defined(__alpha__) || defined(__x86_64__) + return (ps_per_cycle * count) / 1000000UL; +#elif defined(__i386__) + return (10000 * count) / ((CLOCK_TICK_RATE + 50) / 100); +#endif +} + +unsigned int ftape_timediff(unsigned int t0, unsigned int t1) +{ + /* + * Calculate difference in usec for ftape_timestamp results t0 & t1. + * Note that on the i386 platform with short time-stamps, the + * maximum allowed timespan is 1/HZ or we'll lose ticks! + */ + return usecs(diff(t0, t1)); +} + +/* To get an indication of the I/O performance, + * measure the duration of the inb() function. + */ +static void time_inb(void) +{ + int i; + int t0, t1; + unsigned long flags; + int status; + TRACE_FUN(ft_t_any); + + spin_lock_irqsave(&calibr_lock, flags); + t0 = short_ftape_timestamp(); + for (i = 0; i < 1000; ++i) { + status = inb(fdc.msr); + } + t1 = short_ftape_timestamp(); + spin_unlock_irqrestore(&calibr_lock, flags); + TRACE(ft_t_info, "inb() duration: %d nsec", ftape_timediff(t0, t1)); + TRACE_EXIT; +} + +static void init_clock(void) +{ + TRACE_FUN(ft_t_any); + +#if defined(__x86_64__) + ps_per_cycle = 1000000000UL / cpu_khz; +#elif defined(__alpha__) + extern struct hwrpb_struct *hwrpb; + ps_per_cycle = (1000*1000*1000*1000UL) / hwrpb->cycle_freq; +#endif + TRACE_EXIT; +} + +/* + * Input: function taking int count as parameter. + * pointers to calculated calibration variables. + */ +void ftape_calibrate(char *name, + void (*fun) (unsigned int), + unsigned int *calibr_count, + unsigned int *calibr_time) +{ + static int first_time = 1; + int i; + unsigned int tc = 0; + unsigned int count; + unsigned int time; +#if defined(__i386__) + unsigned int old_tc = 0; + unsigned int old_count = 1; + unsigned int old_time = 1; +#endif + TRACE_FUN(ft_t_flow); + + if (first_time) { /* get idea of I/O performance */ + init_clock(); + time_inb(); + first_time = 0; + } + /* value of timeout must be set so that on very slow systems + * it will give a time less than one jiffy, and on + * very fast systems it'll give reasonable precision. + */ + + count = 40; + for (i = 0; i < 15; ++i) { + unsigned int t0; + unsigned int t1; + unsigned int once; + unsigned int multiple; + unsigned long flags; + + *calibr_count = + *calibr_time = count; /* set TC to 1 */ + spin_lock_irqsave(&calibr_lock, flags); + fun(0); /* dummy, get code into cache */ + t0 = short_ftape_timestamp(); + fun(0); /* overhead + one test */ + t1 = short_ftape_timestamp(); + once = diff(t0, t1); + t0 = short_ftape_timestamp(); + fun(count); /* overhead + count tests */ + t1 = short_ftape_timestamp(); + multiple = diff(t0, t1); + spin_unlock_irqrestore(&calibr_lock, flags); + time = ftape_timediff(0, multiple - once); + tc = (1000 * time) / (count - 1); + TRACE(ft_t_any, "once:%3d us,%6d times:%6d us, TC:%5d ns", + usecs(once), count - 1, usecs(multiple), tc); +#if defined(__alpha__) || defined(__x86_64__) + /* + * Increase the calibration count exponentially until the + * calibration time exceeds 100 ms. + */ + if (time >= 100*1000) { + break; + } +#elif defined(__i386__) + /* + * increase the count until the resulting time nears 2/HZ, + * then the tc will drop sharply because we lose LATCH counts. + */ + if (tc <= old_tc / 2) { + time = old_time; + count = old_count; + break; + } + old_tc = tc; + old_count = count; + old_time = time; +#endif + count *= 2; + } + *calibr_count = count - 1; + *calibr_time = time; + TRACE(ft_t_info, "TC for `%s()' = %d nsec (at %d counts)", + name, (1000 * *calibr_time) / *calibr_count, *calibr_count); + TRACE_EXIT; +} diff --git a/drivers/char/ftape/lowlevel/ftape-calibr.h b/drivers/char/ftape/lowlevel/ftape-calibr.h new file mode 100644 index 000000000000..0c7e75246c7d --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-calibr.h @@ -0,0 +1,37 @@ +#ifndef _FTAPE_CALIBR_H +#define _FTAPE_CALIBR_H + +/* + * Copyright (C) 1993-1996 Bas Laarhoven. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-calibr.h,v $ + * $Revision: 1.1 $ + * $Date: 1997/09/19 09:05:26 $ + * + * This file contains a gp calibration routine for + * hardware dependent timeout functions. + */ + +extern void ftape_calibrate(char *name, + void (*fun) (unsigned int), + unsigned int *calibr_count, + unsigned int *calibr_time); +extern unsigned int ftape_timestamp(void); +extern unsigned int ftape_timediff(unsigned int t0, unsigned int t1); + +#endif /* _FTAPE_CALIBR_H */ diff --git a/drivers/char/ftape/lowlevel/ftape-ctl.c b/drivers/char/ftape/lowlevel/ftape-ctl.c new file mode 100644 index 000000000000..32e043911790 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-ctl.c @@ -0,0 +1,897 @@ +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ctl.c,v $ + * $Revision: 1.4 $ + * $Date: 1997/11/11 14:37:44 $ + * + * This file contains the non-read/write ftape functions for the + * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. + */ + +#include <linux/config.h> +#include <linux/errno.h> +#include <linux/mm.h> +#include <linux/mman.h> + +#include <linux/ftape.h> +#include <linux/qic117.h> +#include <asm/uaccess.h> +#include <asm/io.h> + +/* ease porting between pre-2.4.x and later kernels */ +#define vma_get_pgoff(v) ((v)->vm_pgoff) + +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-write.h" +#include "../lowlevel/ftape-read.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-bsm.h" + +/* Global vars. + */ +ftape_info ftape_status = { +/* vendor information */ + { 0, }, /* drive type */ +/* data rates */ + 500, /* used data rate */ + 500, /* drive max rate */ + 500, /* fdc max rate */ +/* drive selection, either FTAPE_SEL_A/B/C/D */ + -1, /* drive selection */ +/* flags set after decode the drive and tape status */ + 0, /* formatted */ + 1, /* no tape */ + 1, /* write protected */ + 1, /* new tape */ +/* values of last queried drive/tape status and error */ + {{0,}}, /* last error code */ + {{0,}}, /* drive status, configuration, tape status */ +/* cartridge geometry */ + 20, /* tracks_per_tape */ + 102, /* segments_per_track */ +/* location of header segments, etc. */ + -1, /* used_header_segment */ + -1, /* header_segment_1 */ + -1, /* header_segment_2 */ + -1, /* first_data_segment */ + -1, /* last_data_segment */ +/* the format code as stored in the header segment */ + fmt_normal, /* format code */ +/* the default for the qic std: unknown */ + -1, +/* is tape running? */ + idle, /* runner_state */ +/* is tape reading/writing/verifying/formatting/deleting */ + idle, /* driver state */ +/* flags fatal hardware error */ + 1, /* failure */ +/* history record */ + { 0, } /* history record */ +}; + +int ftape_segments_per_head = 1020; +int ftape_segments_per_cylinder = 4; +int ftape_init_drive_needed = 1; /* need to be global for ftape_reset_drive() + * in ftape-io.c + */ + +/* Local vars. + */ +static const vendor_struct vendors[] = QIC117_VENDORS; +static const wakeup_method methods[] = WAKEUP_METHODS; + +const ftape_info *ftape_get_status(void) +{ +#if defined(STATUS_PARANOYA) + static ftape_info get_status; + + get_status = ftape_status; + return &get_status; +#else + return &ftape_status; /* maybe return only a copy of it to assure + * read only access + */ +#endif +} + +static int ftape_not_operational(int status) +{ + /* return true if status indicates tape can not be used. + */ + return ((status ^ QIC_STATUS_CARTRIDGE_PRESENT) & + (QIC_STATUS_ERROR | + QIC_STATUS_CARTRIDGE_PRESENT | + QIC_STATUS_NEW_CARTRIDGE)); +} + +int ftape_seek_to_eot(void) +{ + int status; + TRACE_FUN(ft_t_any); + + TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),); + while ((status & QIC_STATUS_AT_EOT) == 0) { + if (ftape_not_operational(status)) { + TRACE_EXIT -EIO; + } + TRACE_CATCH(ftape_command_wait(QIC_PHYSICAL_FORWARD, + ftape_timeout.rewind,&status),); + } + TRACE_EXIT 0; +} + +int ftape_seek_to_bot(void) +{ + int status; + TRACE_FUN(ft_t_any); + + TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),); + while ((status & QIC_STATUS_AT_BOT) == 0) { + if (ftape_not_operational(status)) { + TRACE_EXIT -EIO; + } + TRACE_CATCH(ftape_command_wait(QIC_PHYSICAL_REVERSE, + ftape_timeout.rewind,&status),); + } + TRACE_EXIT 0; +} + +static int ftape_new_cartridge(void) +{ + ft_location.track = -1; /* force seek on first access */ + ftape_zap_read_buffers(); + ftape_zap_write_buffers(); + return 0; +} + +int ftape_abort_operation(void) +{ + int result = 0; + int status; + TRACE_FUN(ft_t_flow); + + if (ft_runner_status == running) { + TRACE(ft_t_noise, "aborting runner, waiting"); + + ft_runner_status = do_abort; + /* set timeout so that the tape will run to logical EOT + * if we missed the last sector and there are no queue pulses. + */ + result = ftape_dumb_stop(); + } + if (ft_runner_status != idle) { + if (ft_runner_status == do_abort) { + TRACE(ft_t_noise, "forcing runner abort"); + } + TRACE(ft_t_noise, "stopping tape"); + result = ftape_stop_tape(&status); + ft_location.known = 0; + ft_runner_status = idle; + } + ftape_reset_buffer(); + ftape_zap_read_buffers(); + ftape_set_state(idle); + TRACE_EXIT result; +} + +static int lookup_vendor_id(unsigned int vendor_id) +{ + int i = 0; + + while (vendors[i].vendor_id != vendor_id) { + if (++i >= NR_ITEMS(vendors)) { + return -1; + } + } + return i; +} + +static void ftape_detach_drive(void) +{ + TRACE_FUN(ft_t_any); + + TRACE(ft_t_flow, "disabling tape drive and fdc"); + ftape_put_drive_to_sleep(ft_drive_type.wake_up); + fdc_catch_stray_interrupts(1); /* one always comes */ + fdc_disable(); + fdc_release_irq_and_dma(); + fdc_release_regions(); + TRACE_EXIT; +} + +static void clear_history(void) +{ + ft_history.used = 0; + ft_history.id_am_errors = + ft_history.id_crc_errors = + ft_history.data_am_errors = + ft_history.data_crc_errors = + ft_history.overrun_errors = + ft_history.no_data_errors = + ft_history.retries = + ft_history.crc_errors = + ft_history.crc_failures = + ft_history.ecc_failures = + ft_history.corrected = + ft_history.defects = + ft_history.rewinds = 0; +} + +static int ftape_activate_drive(vendor_struct * drive_type) +{ + int result = 0; + TRACE_FUN(ft_t_flow); + + /* If we already know the drive type, wake it up. + * Else try to find out what kind of drive is attached. + */ + if (drive_type->wake_up != unknown_wake_up) { + TRACE(ft_t_flow, "enabling tape drive and fdc"); + result = ftape_wakeup_drive(drive_type->wake_up); + if (result < 0) { + TRACE(ft_t_err, "known wakeup method failed"); + } + } else { + wake_up_types method; + const ft_trace_t old_tracing = TRACE_LEVEL; + if (TRACE_LEVEL < ft_t_flow) { + SET_TRACE_LEVEL(ft_t_bug); + } + + /* Try to awaken the drive using all known methods. + * Lower tracing for a while. + */ + for (method=no_wake_up; method < NR_ITEMS(methods); ++method) { + drive_type->wake_up = method; +#ifdef CONFIG_FT_TWO_DRIVES + /* Test setup for dual drive configuration. + * /dev/rft2 uses mountain wakeup + * /dev/rft3 uses colorado wakeup + * Other systems will use the normal scheme. + */ + if ((ft_drive_sel < 2) || + (ft_drive_sel == 2 && method == FT_WAKE_UP_1) || + (ft_drive_sel == 3 && method == FT_WAKE_UP_2)) { + result=ftape_wakeup_drive(drive_type->wake_up); + } else { + result = -EIO; + } +#else + result = ftape_wakeup_drive(drive_type->wake_up); +#endif + if (result >= 0) { + TRACE(ft_t_warn, "drive wakeup method: %s", + methods[drive_type->wake_up].name); + break; + } + } + SET_TRACE_LEVEL(old_tracing); + + if (method >= NR_ITEMS(methods)) { + /* no response at all, cannot open this drive */ + drive_type->wake_up = unknown_wake_up; + TRACE(ft_t_err, "no tape drive found !"); + result = -ENODEV; + } + } + TRACE_EXIT result; +} + +static int ftape_get_drive_status(void) +{ + int result; + int status; + TRACE_FUN(ft_t_flow); + + ft_no_tape = ft_write_protected = 0; + /* Tape drive is activated now. + * First clear error status if present. + */ + do { + result = ftape_ready_wait(ftape_timeout.reset, &status); + if (result < 0) { + if (result == -ETIME) { + TRACE(ft_t_err, "ftape_ready_wait timeout"); + } else if (result == -EINTR) { + TRACE(ft_t_err, "ftape_ready_wait aborted"); + } else { + TRACE(ft_t_err, "ftape_ready_wait failed"); + } + TRACE_EXIT -EIO; + } + /* Clear error condition (drive is ready !) + */ + if (status & QIC_STATUS_ERROR) { + unsigned int error; + qic117_cmd_t command; + + TRACE(ft_t_err, "error status set"); + result = ftape_report_error(&error, &command, 1); + if (result < 0) { + TRACE(ft_t_err, + "report_error_code failed: %d", result); + /* hope it's working next time */ + ftape_reset_drive(); + TRACE_EXIT -EIO; + } else if (error != 0) { + TRACE(ft_t_noise, "error code : %d", error); + TRACE(ft_t_noise, "error command: %d", command); + } + } + if (status & QIC_STATUS_NEW_CARTRIDGE) { + unsigned int error; + qic117_cmd_t command; + const ft_trace_t old_tracing = TRACE_LEVEL; + SET_TRACE_LEVEL(ft_t_bug); + + /* Undocumented feature: Must clear (not present!) + * error here or we'll fail later. + */ + ftape_report_error(&error, &command, 1); + + SET_TRACE_LEVEL(old_tracing); + TRACE(ft_t_info, "status: new cartridge"); + ft_new_tape = 1; + } else { + ft_new_tape = 0; + } + FT_SIGNAL_EXIT(_DONT_BLOCK); + } while (status & QIC_STATUS_ERROR); + + ft_no_tape = !(status & QIC_STATUS_CARTRIDGE_PRESENT); + ft_write_protected = (status & QIC_STATUS_WRITE_PROTECT) != 0; + if (ft_no_tape) { + TRACE(ft_t_warn, "no cartridge present"); + } else { + if (ft_write_protected) { + TRACE(ft_t_noise, "Write protected cartridge"); + } + } + TRACE_EXIT 0; +} + +static void ftape_log_vendor_id(void) +{ + int vendor_index; + TRACE_FUN(ft_t_flow); + + ftape_report_vendor_id(&ft_drive_type.vendor_id); + vendor_index = lookup_vendor_id(ft_drive_type.vendor_id); + if (ft_drive_type.vendor_id == UNKNOWN_VENDOR && + ft_drive_type.wake_up == wake_up_colorado) { + vendor_index = 0; + /* hack to get rid of all this mail */ + ft_drive_type.vendor_id = 0; + } + if (vendor_index < 0) { + /* Unknown vendor id, first time opening device. The + * drive_type remains set to type found at wakeup + * time, this will probably keep the driver operating + * for this new vendor. + */ + TRACE(ft_t_warn, "\n" + KERN_INFO "============ unknown vendor id ===========\n" + KERN_INFO "A new, yet unsupported tape drive is found\n" + KERN_INFO "Please report the following values:\n" + KERN_INFO " Vendor id : 0x%04x\n" + KERN_INFO " Wakeup method : %s\n" + KERN_INFO "And a description of your tape drive\n" + KERN_INFO "to "THE_FTAPE_MAINTAINER"\n" + KERN_INFO "==========================================", + ft_drive_type.vendor_id, + methods[ft_drive_type.wake_up].name); + ft_drive_type.speed = 0; /* unknown */ + } else { + ft_drive_type.name = vendors[vendor_index].name; + ft_drive_type.speed = vendors[vendor_index].speed; + TRACE(ft_t_info, "tape drive type: %s", ft_drive_type.name); + /* scan all methods for this vendor_id in table */ + while(ft_drive_type.wake_up != vendors[vendor_index].wake_up) { + if (vendor_index < NR_ITEMS(vendors) - 1 && + vendors[vendor_index + 1].vendor_id + == + ft_drive_type.vendor_id) { + ++vendor_index; + } else { + break; + } + } + if (ft_drive_type.wake_up != vendors[vendor_index].wake_up) { + TRACE(ft_t_warn, "\n" + KERN_INFO "==========================================\n" + KERN_INFO "wakeup type mismatch:\n" + KERN_INFO "found: %s, expected: %s\n" + KERN_INFO "please report this to "THE_FTAPE_MAINTAINER"\n" + KERN_INFO "==========================================", + methods[ft_drive_type.wake_up].name, + methods[vendors[vendor_index].wake_up].name); + } + } + TRACE_EXIT; +} + +void ftape_calc_timeouts(unsigned int qic_std, + unsigned int data_rate, + unsigned int tape_len) +{ + int speed; /* deci-ips ! */ + int ff_speed; + int length; + TRACE_FUN(ft_t_any); + + /* tape transport speed + * data rate: QIC-40 QIC-80 QIC-3010 QIC-3020 + * + * 250 Kbps 25 ips n/a n/a n/a + * 500 Kbps 50 ips 34 ips 22.6 ips n/a + * 1 Mbps n/a 68 ips 45.2 ips 22.6 ips + * 2 Mbps n/a n/a n/a 45.2 ips + * + * fast tape transport speed is at least 68 ips. + */ + switch (qic_std) { + case QIC_TAPE_QIC40: + speed = (data_rate == 250) ? 250 : 500; + break; + case QIC_TAPE_QIC80: + speed = (data_rate == 500) ? 340 : 680; + break; + case QIC_TAPE_QIC3010: + speed = (data_rate == 500) ? 226 : 452; + break; + case QIC_TAPE_QIC3020: + speed = (data_rate == 1000) ? 226 : 452; + break; + default: + TRACE(ft_t_bug, "Unknown qic_std (bug) ?"); + speed = 500; + break; + } + if (ft_drive_type.speed == 0) { + unsigned long t0; + static int dt = 0; /* keep gcc from complaining */ + static int first_time = 1; + + /* Measure the time it takes to wind to EOT and back to BOT. + * If the tape length is known, calculate the rewind speed. + * Else keep the time value for calculation of the rewind + * speed later on, when the length _is_ known. + * Ask for a report only when length and speed are both known. + */ + if (first_time) { + ftape_seek_to_bot(); + t0 = jiffies; + ftape_seek_to_eot(); + ftape_seek_to_bot(); + dt = (int) (((jiffies - t0) * FT_USPT) / 1000); + if (dt < 1) { + dt = 1; /* prevent div by zero on failures */ + } + first_time = 0; + TRACE(ft_t_info, + "trying to determine seek timeout, got %d msec", + dt); + } + if (tape_len != 0) { + ft_drive_type.speed = + (2 * 12 * tape_len * 1000) / dt; + TRACE(ft_t_warn, "\n" + KERN_INFO "==========================================\n" + KERN_INFO "drive type: %s\n" + KERN_INFO "delta time = %d ms, length = %d ft\n" + KERN_INFO "has a maximum tape speed of %d ips\n" + KERN_INFO "please report this to "THE_FTAPE_MAINTAINER"\n" + KERN_INFO "==========================================", + ft_drive_type.name, dt, tape_len, + ft_drive_type.speed); + } + } + /* Handle unknown length tapes as very long ones. We'll + * determine the actual length from a header segment later. + * This is normal for all modern (Wide,TR1/2/3) formats. + */ + if (tape_len <= 0) { + TRACE(ft_t_noise, + "Unknown tape length, using maximal timeouts"); + length = QIC_TOP_TAPE_LEN; /* use worst case values */ + } else { + length = tape_len; /* use actual values */ + } + if (ft_drive_type.speed == 0) { + ff_speed = speed; + } else { + ff_speed = ft_drive_type.speed; + } + /* time to go from bot to eot at normal speed (data rate): + * time = (1+delta) * length (ft) * 12 (inch/ft) / speed (ips) + * delta = 10 % for seek speed, 20 % for rewind speed. + */ + ftape_timeout.seek = (length * 132 * FT_SECOND) / speed; + ftape_timeout.rewind = (length * 144 * FT_SECOND) / (10 * ff_speed); + ftape_timeout.reset = 20 * FT_SECOND + ftape_timeout.rewind; + TRACE(ft_t_noise, "timeouts for speed = %d, length = %d\n" + KERN_INFO "seek timeout : %d sec\n" + KERN_INFO "rewind timeout: %d sec\n" + KERN_INFO "reset timeout : %d sec", + speed, length, + (ftape_timeout.seek + 500) / 1000, + (ftape_timeout.rewind + 500) / 1000, + (ftape_timeout.reset + 500) / 1000); + TRACE_EXIT; +} + +/* This function calibrates the datarate (i.e. determines the maximal + * usable data rate) and sets the global variable ft_qic_std to qic_std + * + */ +int ftape_calibrate_data_rate(unsigned int qic_std) +{ + int rate = ft_fdc_rate_limit; + int result; + TRACE_FUN(ft_t_flow); + + ft_qic_std = qic_std; + + if (ft_qic_std == -1) { + TRACE_ABORT(-EIO, ft_t_err, + "Unable to determine data rate if QIC standard is unknown"); + } + + /* Select highest rate supported by both fdc and drive. + * Start with highest rate supported by the fdc. + */ + while (fdc_set_data_rate(rate) < 0 && rate > 250) { + rate /= 2; + } + TRACE(ft_t_info, + "Highest FDC supported data rate: %d Kbps", rate); + ft_fdc_max_rate = rate; + do { + result = ftape_set_data_rate(rate, ft_qic_std); + } while (result == -EINVAL && (rate /= 2) > 250); + if (result < 0) { + TRACE_ABORT(-EIO, ft_t_err, "set datarate failed"); + } + ft_data_rate = rate; + TRACE_EXIT 0; +} + +static int ftape_init_drive(void) +{ + int status; + qic_model model; + unsigned int qic_std; + unsigned int data_rate; + TRACE_FUN(ft_t_flow); + + ftape_init_drive_needed = 0; /* don't retry if this fails ? */ + TRACE_CATCH(ftape_report_raw_drive_status(&status),); + if (status & QIC_STATUS_CARTRIDGE_PRESENT) { + if (!(status & QIC_STATUS_AT_BOT)) { + /* Antique drives will get here after a soft reset, + * modern ones only if the driver is loaded when the + * tape wasn't rewound properly. + */ + /* Tape should be at bot if new cartridge ! */ + ftape_seek_to_bot(); + } + if (!(status & QIC_STATUS_REFERENCED)) { + TRACE(ft_t_flow, "starting seek_load_point"); + TRACE_CATCH(ftape_command_wait(QIC_SEEK_LOAD_POINT, + ftape_timeout.reset, + &status),); + } + } + ft_formatted = (status & QIC_STATUS_REFERENCED) != 0; + if (!ft_formatted) { + TRACE(ft_t_warn, "Warning: tape is not formatted !"); + } + + /* report configuration aborts when ftape_tape_len == -1 + * unknown qic_std is okay if not formatted. + */ + TRACE_CATCH(ftape_report_configuration(&model, + &data_rate, + &qic_std, + &ftape_tape_len),); + + /* Maybe add the following to the /proc entry + */ + TRACE(ft_t_info, "%s drive @ %d Kbps", + (model == prehistoric) ? "prehistoric" : + ((model == pre_qic117c) ? "pre QIC-117C" : + ((model == post_qic117b) ? "post QIC-117B" : + "post QIC-117D")), data_rate); + + if (ft_formatted) { + /* initialize ft_used_data_rate to maximum value + * and set ft_qic_std + */ + TRACE_CATCH(ftape_calibrate_data_rate(qic_std),); + if (ftape_tape_len == 0) { + TRACE(ft_t_info, "unknown length QIC-%s tape", + (ft_qic_std == QIC_TAPE_QIC40) ? "40" : + ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : + ((ft_qic_std == QIC_TAPE_QIC3010) + ? "3010" : "3020"))); + } else { + TRACE(ft_t_info, "%d ft. QIC-%s tape", ftape_tape_len, + (ft_qic_std == QIC_TAPE_QIC40) ? "40" : + ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : + ((ft_qic_std == QIC_TAPE_QIC3010) + ? "3010" : "3020"))); + } + ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len); + /* soft write-protect QIC-40/QIC-80 cartridges used with a + * Colorado T3000 drive. Buggy hardware! + */ + if ((ft_drive_type.vendor_id == 0x011c6) && + ((ft_qic_std == QIC_TAPE_QIC40 || + ft_qic_std == QIC_TAPE_QIC80) && + !ft_write_protected)) { + TRACE(ft_t_warn, "\n" + KERN_INFO "The famous Colorado T3000 bug:\n" + KERN_INFO "%s drives can't write QIC40 and QIC80\n" + KERN_INFO "cartridges but don't set the write-protect flag!", + ft_drive_type.name); + ft_write_protected = 1; + } + } else { + /* Doesn't make too much sense to set the data rate + * because we don't know what to use for the write + * precompensation. + * Need to do this again when formatting the cartridge. + */ + ft_data_rate = data_rate; + ftape_calc_timeouts(QIC_TAPE_QIC40, + data_rate, + ftape_tape_len); + } + ftape_new_cartridge(); + TRACE_EXIT 0; +} + +static void ftape_munmap(void) +{ + int i; + TRACE_FUN(ft_t_flow); + + for (i = 0; i < ft_nr_buffers; i++) { + ft_buffer[i]->mmapped = 0; + } + TRACE_EXIT; +} + +/* Map the dma buffers into the virtual address range given by vma. + * We only check the caller doesn't map non-existent buffers. We + * don't check for multiple mappings. + */ +int ftape_mmap(struct vm_area_struct *vma) +{ + int num_buffers; + int i; + TRACE_FUN(ft_t_flow); + + if (ft_failure) { + TRACE_EXIT -ENODEV; + } + if (!(vma->vm_flags & (VM_READ|VM_WRITE))) { + TRACE_ABORT(-EINVAL, ft_t_err, "Undefined mmap() access"); + } + if (vma_get_pgoff(vma) != 0) { + TRACE_ABORT(-EINVAL, ft_t_err, "page offset must be 0"); + } + if ((vma->vm_end - vma->vm_start) % FT_BUFF_SIZE != 0) { + TRACE_ABORT(-EINVAL, ft_t_err, + "size = %ld, should be a multiple of %d", + vma->vm_end - vma->vm_start, + FT_BUFF_SIZE); + } + num_buffers = (vma->vm_end - vma->vm_start) / FT_BUFF_SIZE; + if (num_buffers > ft_nr_buffers) { + TRACE_ABORT(-EINVAL, + ft_t_err, "size = %ld, should be less than %d", + vma->vm_end - vma->vm_start, + ft_nr_buffers * FT_BUFF_SIZE); + } + if (ft_driver_state != idle) { + /* this also clears the buffer states + */ + ftape_abort_operation(); + } else { + ftape_reset_buffer(); + } + for (i = 0; i < num_buffers; i++) { + unsigned long pfn; + + pfn = virt_to_phys(ft_buffer[i]->address) >> PAGE_SHIFT; + TRACE_CATCH(remap_pfn_range(vma, vma->vm_start + + i * FT_BUFF_SIZE, + pfn, + FT_BUFF_SIZE, + vma->vm_page_prot), + _res = -EAGAIN); + TRACE(ft_t_noise, "remapped dma buffer @ %p to location @ %p", + ft_buffer[i]->address, + (void *)(vma->vm_start + i * FT_BUFF_SIZE)); + } + for (i = 0; i < num_buffers; i++) { + memset(ft_buffer[i]->address, 0xAA, FT_BUFF_SIZE); + ft_buffer[i]->mmapped++; + } + TRACE_EXIT 0; +} + +static void ftape_init_driver(void); /* forward declaration */ + +/* OPEN routine called by kernel-interface code + */ +int ftape_enable(int drive_selection) +{ + TRACE_FUN(ft_t_any); + + if (ft_drive_sel == -1 || ft_drive_sel != drive_selection) { + /* Other selection than last time + */ + ftape_init_driver(); + } + ft_drive_sel = FTAPE_SEL(drive_selection); + ft_failure = 0; + TRACE_CATCH(fdc_init(),); /* init & detect fdc */ + TRACE_CATCH(ftape_activate_drive(&ft_drive_type), + fdc_disable(); + fdc_release_irq_and_dma(); + fdc_release_regions()); + TRACE_CATCH(ftape_get_drive_status(), ftape_detach_drive()); + if (ft_drive_type.vendor_id == UNKNOWN_VENDOR) { + ftape_log_vendor_id(); + } + if (ft_new_tape) { + ftape_init_drive_needed = 1; + } + if (!ft_no_tape && ftape_init_drive_needed) { + TRACE_CATCH(ftape_init_drive(), ftape_detach_drive()); + } + ftape_munmap(); /* clear the mmap flag */ + clear_history(); + TRACE_EXIT 0; +} + +/* release routine called by the high level interface modules + * zftape or sftape. + */ +void ftape_disable(void) +{ + int i; + TRACE_FUN(ft_t_any); + + for (i = 0; i < ft_nr_buffers; i++) { + if (ft_buffer[i]->mmapped) { + TRACE(ft_t_noise, "first byte of buffer %d: 0x%02x", + i, *ft_buffer[i]->address); + } + } + if (sigtestsetmask(¤t->pending.signal, _DONT_BLOCK) && + !(sigtestsetmask(¤t->pending.signal, _NEVER_BLOCK)) && + ftape_tape_running) { + TRACE(ft_t_warn, + "Interrupted by fatal signal and tape still running"); + ftape_dumb_stop(); + ftape_abort_operation(); /* it's annoying */ + } else { + ftape_set_state(idle); + } + ftape_detach_drive(); + if (ft_history.used) { + TRACE(ft_t_info, "== Non-fatal errors this run: =="); + TRACE(ft_t_info, "fdc isr statistics:\n" + KERN_INFO " id_am_errors : %3d\n" + KERN_INFO " id_crc_errors : %3d\n" + KERN_INFO " data_am_errors : %3d\n" + KERN_INFO " data_crc_errors : %3d\n" + KERN_INFO " overrun_errors : %3d\n" + KERN_INFO " no_data_errors : %3d\n" + KERN_INFO " retries : %3d", + ft_history.id_am_errors, ft_history.id_crc_errors, + ft_history.data_am_errors, ft_history.data_crc_errors, + ft_history.overrun_errors, ft_history.no_data_errors, + ft_history.retries); + if (ft_history.used & 1) { + TRACE(ft_t_info, "ecc statistics:\n" + KERN_INFO " crc_errors : %3d\n" + KERN_INFO " crc_failures : %3d\n" + KERN_INFO " ecc_failures : %3d\n" + KERN_INFO " sectors corrected: %3d", + ft_history.crc_errors, ft_history.crc_failures, + ft_history.ecc_failures, ft_history.corrected); + } + if (ft_history.defects > 0) { + TRACE(ft_t_warn, "Warning: %d media defects!", + ft_history.defects); + } + if (ft_history.rewinds > 0) { + TRACE(ft_t_info, "tape motion statistics:\n" + KERN_INFO "repositions : %3d", + ft_history.rewinds); + } + } + ft_failure = 1; + TRACE_EXIT; +} + +static void ftape_init_driver(void) +{ + TRACE_FUN(ft_t_flow); + + ft_drive_type.vendor_id = UNKNOWN_VENDOR; + ft_drive_type.speed = 0; + ft_drive_type.wake_up = unknown_wake_up; + ft_drive_type.name = "Unknown"; + + ftape_timeout.seek = 650 * FT_SECOND; + ftape_timeout.reset = 670 * FT_SECOND; + ftape_timeout.rewind = 650 * FT_SECOND; + ftape_timeout.head_seek = 15 * FT_SECOND; + ftape_timeout.stop = 5 * FT_SECOND; + ftape_timeout.pause = 16 * FT_SECOND; + + ft_qic_std = -1; + ftape_tape_len = 0; /* unknown */ + ftape_current_command = 0; + ftape_current_cylinder = -1; + + ft_segments_per_track = 102; + ftape_segments_per_head = 1020; + ftape_segments_per_cylinder = 4; + ft_tracks_per_tape = 20; + + ft_failure = 1; + + ft_formatted = 0; + ft_no_tape = 1; + ft_write_protected = 1; + ft_new_tape = 1; + + ft_driver_state = idle; + + ft_data_rate = + ft_fdc_max_rate = 500; + ft_drive_max_rate = 0; /* triggers set_rate_test() */ + + ftape_init_drive_needed = 1; + + ft_header_segment_1 = -1; + ft_header_segment_2 = -1; + ft_used_header_segment = -1; + ft_first_data_segment = -1; + ft_last_data_segment = -1; + + ft_location.track = -1; + ft_location.known = 0; + + ftape_tape_running = 0; + ftape_might_be_off_track = 1; + + ftape_new_cartridge(); /* init some tape related variables */ + ftape_init_bsm(); + TRACE_EXIT; +} diff --git a/drivers/char/ftape/lowlevel/ftape-ctl.h b/drivers/char/ftape/lowlevel/ftape-ctl.h new file mode 100644 index 000000000000..5f5e30bc3615 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-ctl.h @@ -0,0 +1,162 @@ +#ifndef _FTAPE_CTL_H +#define _FTAPE_CTL_H + +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ctl.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:09 $ + * + * This file contains the non-standard IOCTL related definitions + * for the QIC-40/80/3010/3020 floppy-tape driver "ftape" for + * Linux. + */ + +#include <linux/ioctl.h> +#include <linux/mtio.h> +#include <linux/ftape-vendors.h> + +#include "../lowlevel/ftape-rw.h" +#include <linux/ftape-header-segment.h> + +typedef struct { + int used; /* any reading or writing done */ + /* isr statistics */ + unsigned int id_am_errors; /* id address mark not found */ + unsigned int id_crc_errors; /* crc error in id address mark */ + unsigned int data_am_errors; /* data address mark not found */ + unsigned int data_crc_errors; /* crc error in data field */ + unsigned int overrun_errors; /* fdc access timing problem */ + unsigned int no_data_errors; /* sector not found */ + unsigned int retries; /* number of tape retries */ + /* ecc statistics */ + unsigned int crc_errors; /* crc error in data */ + unsigned int crc_failures; /* bad data without crc error */ + unsigned int ecc_failures; /* failed to correct */ + unsigned int corrected; /* total sectors corrected */ + /* general statistics */ + unsigned int rewinds; /* number of tape rewinds */ + unsigned int defects; /* bad sectors due to media defects */ +} history_record; + +/* this structure contains * ALL * information that we want + * our child modules to know about, but don't want them to + * modify. + */ +typedef struct { + /* vendor information */ + vendor_struct fti_drive_type; + /* data rates */ + unsigned int fti_used_data_rate; + unsigned int fti_drive_max_rate; + unsigned int fti_fdc_max_rate; + /* drive selection, either FTAPE_SEL_A/B/C/D */ + int fti_drive_sel; + /* flags set after decode the drive and tape status */ + unsigned int fti_formatted :1; + unsigned int fti_no_tape :1; + unsigned int fti_write_protected:1; + unsigned int fti_new_tape :1; + /* values of last queried drive/tape status and error */ + ft_drive_error fti_last_error; + ft_drive_status fti_last_status; + /* cartridge geometry */ + unsigned int fti_tracks_per_tape; + unsigned int fti_segments_per_track; + /* location of header segments, etc. */ + int fti_used_header_segment; + int fti_header_segment_1; + int fti_header_segment_2; + int fti_first_data_segment; + int fti_last_data_segment; + /* the format code as stored in the header segment */ + ft_format_type fti_format_code; + /* the following is the sole reason for the ftape_set_status() call */ + unsigned int fti_qic_std; + /* is tape running? */ + volatile enum runner_status_enum fti_runner_status; + /* is tape reading/writing/verifying/formatting/deleting */ + buffer_state_enum fti_state; + /* flags fatal hardware error */ + unsigned int fti_failure:1; + /* history record */ + history_record fti_history; +} ftape_info; + +/* vendor information */ +#define ft_drive_type ftape_status.fti_drive_type +/* data rates */ +#define ft_data_rate ftape_status.fti_used_data_rate +#define ft_drive_max_rate ftape_status.fti_drive_max_rate +#define ft_fdc_max_rate ftape_status.fti_fdc_max_rate +/* drive selection, either FTAPE_SEL_A/B/C/D */ +#define ft_drive_sel ftape_status.fti_drive_sel +/* flags set after decode the drive and tape status */ +#define ft_formatted ftape_status.fti_formatted +#define ft_no_tape ftape_status.fti_no_tape +#define ft_write_protected ftape_status.fti_write_protected +#define ft_new_tape ftape_status.fti_new_tape +/* values of last queried drive/tape status and error */ +#define ft_last_error ftape_status.fti_last_error +#define ft_last_status ftape_status.fti_last_status +/* cartridge geometry */ +#define ft_tracks_per_tape ftape_status.fti_tracks_per_tape +#define ft_segments_per_track ftape_status.fti_segments_per_track +/* the format code as stored in the header segment */ +#define ft_format_code ftape_status.fti_format_code +/* the qic status as returned by report drive configuration */ +#define ft_qic_std ftape_status.fti_qic_std +#define ft_used_header_segment ftape_status.fti_used_header_segment +#define ft_header_segment_1 ftape_status.fti_header_segment_1 +#define ft_header_segment_2 ftape_status.fti_header_segment_2 +#define ft_first_data_segment ftape_status.fti_first_data_segment +#define ft_last_data_segment ftape_status.fti_last_data_segment +/* is tape running? */ +#define ft_runner_status ftape_status.fti_runner_status +/* is tape reading/writing/verifying/formatting/deleting */ +#define ft_driver_state ftape_status.fti_state +/* flags fatal hardware error */ +#define ft_failure ftape_status.fti_failure +/* history record */ +#define ft_history ftape_status.fti_history + +/* + * ftape-ctl.c defined global vars. + */ +extern ftape_info ftape_status; +extern int ftape_segments_per_head; +extern int ftape_segments_per_cylinder; +extern int ftape_init_drive_needed; + +/* + * ftape-ctl.c defined global functions. + */ +extern int ftape_mmap(struct vm_area_struct *vma); +extern int ftape_enable(int drive_selection); +extern void ftape_disable(void); +extern int ftape_seek_to_bot(void); +extern int ftape_seek_to_eot(void); +extern int ftape_abort_operation(void); +extern void ftape_calc_timeouts(unsigned int qic_std, + unsigned int data_rate, + unsigned int tape_len); +extern int ftape_calibrate_data_rate(unsigned int qic_std); +extern const ftape_info *ftape_get_status(void); +#endif diff --git a/drivers/char/ftape/lowlevel/ftape-ecc.c b/drivers/char/ftape/lowlevel/ftape-ecc.c new file mode 100644 index 000000000000..e5632f674bc8 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-ecc.c @@ -0,0 +1,853 @@ +/* + * + * Copyright (c) 1993 Ning and David Mosberger. + + This is based on code originally written by Bas Laarhoven (bas@vimec.nl) + and David L. Brown, Jr., and incorporates improvements suggested by + Kai Harrekilde-Petersen. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2, or (at + your option) any later version. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, + USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ecc.c,v $ + * $Revision: 1.3 $ + * $Date: 1997/10/05 19:18:10 $ + * + * This file contains the Reed-Solomon error correction code + * for the QIC-40/80 floppy-tape driver for Linux. + */ + +#include <linux/ftape.h> + +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-ecc.h" + +/* Machines that are big-endian should define macro BIG_ENDIAN. + * Unfortunately, there doesn't appear to be a standard include file + * that works for all OSs. + */ + +#if defined(__sparc__) || defined(__hppa) +#define BIG_ENDIAN +#endif /* __sparc__ || __hppa */ + +#if defined(__mips__) +#error Find a smart way to determine the Endianness of the MIPS CPU +#endif + +/* Notice: to minimize the potential for confusion, we use r to + * denote the independent variable of the polynomials in the + * Galois Field GF(2^8). We reserve x for polynomials that + * that have coefficients in GF(2^8). + * + * The Galois Field in which coefficient arithmetic is performed are + * the polynomials over Z_2 (i.e., 0 and 1) modulo the irreducible + * polynomial f(r), where f(r)=r^8 + r^7 + r^2 + r + 1. A polynomial + * is represented as a byte with the MSB as the coefficient of r^7 and + * the LSB as the coefficient of r^0. For example, the binary + * representation of f(x) is 0x187 (of course, this doesn't fit into 8 + * bits). In this field, the polynomial r is a primitive element. + * That is, r^i with i in 0,...,255 enumerates all elements in the + * field. + * + * The generator polynomial for the QIC-80 ECC is + * + * g(x) = x^3 + r^105*x^2 + r^105*x + 1 + * + * which can be factored into: + * + * g(x) = (x-r^-1)(x-r^0)(x-r^1) + * + * the byte representation of the coefficients are: + * + * r^105 = 0xc0 + * r^-1 = 0xc3 + * r^0 = 0x01 + * r^1 = 0x02 + * + * Notice that r^-1 = r^254 as exponent arithmetic is performed + * modulo 2^8-1 = 255. + * + * For more information on Galois Fields and Reed-Solomon codes, refer + * to any good book. I found _An Introduction to Error Correcting + * Codes with Applications_ by S. A. Vanstone and P. C. van Oorschot + * to be a good introduction into the former. _CODING THEORY: The + * Essentials_ I found very useful for its concise description of + * Reed-Solomon encoding/decoding. + * + */ + +typedef __u8 Matrix[3][3]; + +/* + * gfpow[] is defined such that gfpow[i] returns r^i if + * i is in the range [0..255]. + */ +static const __u8 gfpow[] = +{ + 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, + 0x87, 0x89, 0x95, 0xad, 0xdd, 0x3d, 0x7a, 0xf4, + 0x6f, 0xde, 0x3b, 0x76, 0xec, 0x5f, 0xbe, 0xfb, + 0x71, 0xe2, 0x43, 0x86, 0x8b, 0x91, 0xa5, 0xcd, + 0x1d, 0x3a, 0x74, 0xe8, 0x57, 0xae, 0xdb, 0x31, + 0x62, 0xc4, 0x0f, 0x1e, 0x3c, 0x78, 0xf0, 0x67, + 0xce, 0x1b, 0x36, 0x6c, 0xd8, 0x37, 0x6e, 0xdc, + 0x3f, 0x7e, 0xfc, 0x7f, 0xfe, 0x7b, 0xf6, 0x6b, + 0xd6, 0x2b, 0x56, 0xac, 0xdf, 0x39, 0x72, 0xe4, + 0x4f, 0x9e, 0xbb, 0xf1, 0x65, 0xca, 0x13, 0x26, + 0x4c, 0x98, 0xb7, 0xe9, 0x55, 0xaa, 0xd3, 0x21, + 0x42, 0x84, 0x8f, 0x99, 0xb5, 0xed, 0x5d, 0xba, + 0xf3, 0x61, 0xc2, 0x03, 0x06, 0x0c, 0x18, 0x30, + 0x60, 0xc0, 0x07, 0x0e, 0x1c, 0x38, 0x70, 0xe0, + 0x47, 0x8e, 0x9b, 0xb1, 0xe5, 0x4d, 0x9a, 0xb3, + 0xe1, 0x45, 0x8a, 0x93, 0xa1, 0xc5, 0x0d, 0x1a, + 0x34, 0x68, 0xd0, 0x27, 0x4e, 0x9c, 0xbf, 0xf9, + 0x75, 0xea, 0x53, 0xa6, 0xcb, 0x11, 0x22, 0x44, + 0x88, 0x97, 0xa9, 0xd5, 0x2d, 0x5a, 0xb4, 0xef, + 0x59, 0xb2, 0xe3, 0x41, 0x82, 0x83, 0x81, 0x85, + 0x8d, 0x9d, 0xbd, 0xfd, 0x7d, 0xfa, 0x73, 0xe6, + 0x4b, 0x96, 0xab, 0xd1, 0x25, 0x4a, 0x94, 0xaf, + 0xd9, 0x35, 0x6a, 0xd4, 0x2f, 0x5e, 0xbc, 0xff, + 0x79, 0xf2, 0x63, 0xc6, 0x0b, 0x16, 0x2c, 0x58, + 0xb0, 0xe7, 0x49, 0x92, 0xa3, 0xc1, 0x05, 0x0a, + 0x14, 0x28, 0x50, 0xa0, 0xc7, 0x09, 0x12, 0x24, + 0x48, 0x90, 0xa7, 0xc9, 0x15, 0x2a, 0x54, 0xa8, + 0xd7, 0x29, 0x52, 0xa4, 0xcf, 0x19, 0x32, 0x64, + 0xc8, 0x17, 0x2e, 0x5c, 0xb8, 0xf7, 0x69, 0xd2, + 0x23, 0x46, 0x8c, 0x9f, 0xb9, 0xf5, 0x6d, 0xda, + 0x33, 0x66, 0xcc, 0x1f, 0x3e, 0x7c, 0xf8, 0x77, + 0xee, 0x5b, 0xb6, 0xeb, 0x51, 0xa2, 0xc3, 0x01 +}; + +/* + * This is a log table. That is, gflog[r^i] returns i (modulo f(r)). + * gflog[0] is undefined and the first element is therefore not valid. + */ +static const __u8 gflog[256] = +{ + 0xff, 0x00, 0x01, 0x63, 0x02, 0xc6, 0x64, 0x6a, + 0x03, 0xcd, 0xc7, 0xbc, 0x65, 0x7e, 0x6b, 0x2a, + 0x04, 0x8d, 0xce, 0x4e, 0xc8, 0xd4, 0xbd, 0xe1, + 0x66, 0xdd, 0x7f, 0x31, 0x6c, 0x20, 0x2b, 0xf3, + 0x05, 0x57, 0x8e, 0xe8, 0xcf, 0xac, 0x4f, 0x83, + 0xc9, 0xd9, 0xd5, 0x41, 0xbe, 0x94, 0xe2, 0xb4, + 0x67, 0x27, 0xde, 0xf0, 0x80, 0xb1, 0x32, 0x35, + 0x6d, 0x45, 0x21, 0x12, 0x2c, 0x0d, 0xf4, 0x38, + 0x06, 0x9b, 0x58, 0x1a, 0x8f, 0x79, 0xe9, 0x70, + 0xd0, 0xc2, 0xad, 0xa8, 0x50, 0x75, 0x84, 0x48, + 0xca, 0xfc, 0xda, 0x8a, 0xd6, 0x54, 0x42, 0x24, + 0xbf, 0x98, 0x95, 0xf9, 0xe3, 0x5e, 0xb5, 0x15, + 0x68, 0x61, 0x28, 0xba, 0xdf, 0x4c, 0xf1, 0x2f, + 0x81, 0xe6, 0xb2, 0x3f, 0x33, 0xee, 0x36, 0x10, + 0x6e, 0x18, 0x46, 0xa6, 0x22, 0x88, 0x13, 0xf7, + 0x2d, 0xb8, 0x0e, 0x3d, 0xf5, 0xa4, 0x39, 0x3b, + 0x07, 0x9e, 0x9c, 0x9d, 0x59, 0x9f, 0x1b, 0x08, + 0x90, 0x09, 0x7a, 0x1c, 0xea, 0xa0, 0x71, 0x5a, + 0xd1, 0x1d, 0xc3, 0x7b, 0xae, 0x0a, 0xa9, 0x91, + 0x51, 0x5b, 0x76, 0x72, 0x85, 0xa1, 0x49, 0xeb, + 0xcb, 0x7c, 0xfd, 0xc4, 0xdb, 0x1e, 0x8b, 0xd2, + 0xd7, 0x92, 0x55, 0xaa, 0x43, 0x0b, 0x25, 0xaf, + 0xc0, 0x73, 0x99, 0x77, 0x96, 0x5c, 0xfa, 0x52, + 0xe4, 0xec, 0x5f, 0x4a, 0xb6, 0xa2, 0x16, 0x86, + 0x69, 0xc5, 0x62, 0xfe, 0x29, 0x7d, 0xbb, 0xcc, + 0xe0, 0xd3, 0x4d, 0x8c, 0xf2, 0x1f, 0x30, 0xdc, + 0x82, 0xab, 0xe7, 0x56, 0xb3, 0x93, 0x40, 0xd8, + 0x34, 0xb0, 0xef, 0x26, 0x37, 0x0c, 0x11, 0x44, + 0x6f, 0x78, 0x19, 0x9a, 0x47, 0x74, 0xa7, 0xc1, + 0x23, 0x53, 0x89, 0xfb, 0x14, 0x5d, 0xf8, 0x97, + 0x2e, 0x4b, 0xb9, 0x60, 0x0f, 0xed, 0x3e, 0xe5, + 0xf6, 0x87, 0xa5, 0x17, 0x3a, 0xa3, 0x3c, 0xb7 +}; + +/* This is a multiplication table for the factor 0xc0 (i.e., r^105 (mod f(r)). + * gfmul_c0[f] returns r^105 * f(r) (modulo f(r)). + */ +static const __u8 gfmul_c0[256] = +{ + 0x00, 0xc0, 0x07, 0xc7, 0x0e, 0xce, 0x09, 0xc9, + 0x1c, 0xdc, 0x1b, 0xdb, 0x12, 0xd2, 0x15, 0xd5, + 0x38, 0xf8, 0x3f, 0xff, 0x36, 0xf6, 0x31, 0xf1, + 0x24, 0xe4, 0x23, 0xe3, 0x2a, 0xea, 0x2d, 0xed, + 0x70, 0xb0, 0x77, 0xb7, 0x7e, 0xbe, 0x79, 0xb9, + 0x6c, 0xac, 0x6b, 0xab, 0x62, 0xa2, 0x65, 0xa5, + 0x48, 0x88, 0x4f, 0x8f, 0x46, 0x86, 0x41, 0x81, + 0x54, 0x94, 0x53, 0x93, 0x5a, 0x9a, 0x5d, 0x9d, + 0xe0, 0x20, 0xe7, 0x27, 0xee, 0x2e, 0xe9, 0x29, + 0xfc, 0x3c, 0xfb, 0x3b, 0xf2, 0x32, 0xf5, 0x35, + 0xd8, 0x18, 0xdf, 0x1f, 0xd6, 0x16, 0xd1, 0x11, + 0xc4, 0x04, 0xc3, 0x03, 0xca, 0x0a, 0xcd, 0x0d, + 0x90, 0x50, 0x97, 0x57, 0x9e, 0x5e, 0x99, 0x59, + 0x8c, 0x4c, 0x8b, 0x4b, 0x82, 0x42, 0x85, 0x45, + 0xa8, 0x68, 0xaf, 0x6f, 0xa6, 0x66, 0xa1, 0x61, + 0xb4, 0x74, 0xb3, 0x73, 0xba, 0x7a, 0xbd, 0x7d, + 0x47, 0x87, 0x40, 0x80, 0x49, 0x89, 0x4e, 0x8e, + 0x5b, 0x9b, 0x5c, 0x9c, 0x55, 0x95, 0x52, 0x92, + 0x7f, 0xbf, 0x78, 0xb8, 0x71, 0xb1, 0x76, 0xb6, + 0x63, 0xa3, 0x64, 0xa4, 0x6d, 0xad, 0x6a, 0xaa, + 0x37, 0xf7, 0x30, 0xf0, 0x39, 0xf9, 0x3e, 0xfe, + 0x2b, 0xeb, 0x2c, 0xec, 0x25, 0xe5, 0x22, 0xe2, + 0x0f, 0xcf, 0x08, 0xc8, 0x01, 0xc1, 0x06, 0xc6, + 0x13, 0xd3, 0x14, 0xd4, 0x1d, 0xdd, 0x1a, 0xda, + 0xa7, 0x67, 0xa0, 0x60, 0xa9, 0x69, 0xae, 0x6e, + 0xbb, 0x7b, 0xbc, 0x7c, 0xb5, 0x75, 0xb2, 0x72, + 0x9f, 0x5f, 0x98, 0x58, 0x91, 0x51, 0x96, 0x56, + 0x83, 0x43, 0x84, 0x44, 0x8d, 0x4d, 0x8a, 0x4a, + 0xd7, 0x17, 0xd0, 0x10, 0xd9, 0x19, 0xde, 0x1e, + 0xcb, 0x0b, 0xcc, 0x0c, 0xc5, 0x05, 0xc2, 0x02, + 0xef, 0x2f, 0xe8, 0x28, 0xe1, 0x21, 0xe6, 0x26, + 0xf3, 0x33, 0xf4, 0x34, 0xfd, 0x3d, 0xfa, 0x3a +}; + + +/* Returns V modulo 255 provided V is in the range -255,-254,...,509. + */ +static inline __u8 mod255(int v) +{ + if (v > 0) { + if (v < 255) { + return v; + } else { + return v - 255; + } + } else { + return v + 255; + } +} + + +/* Add two numbers in the field. Addition in this field is equivalent + * to a bit-wise exclusive OR operation---subtraction is therefore + * identical to addition. + */ +static inline __u8 gfadd(__u8 a, __u8 b) +{ + return a ^ b; +} + + +/* Add two vectors of numbers in the field. Each byte in A and B gets + * added individually. + */ +static inline unsigned long gfadd_long(unsigned long a, unsigned long b) +{ + return a ^ b; +} + + +/* Multiply two numbers in the field: + */ +static inline __u8 gfmul(__u8 a, __u8 b) +{ + if (a && b) { + return gfpow[mod255(gflog[a] + gflog[b])]; + } else { + return 0; + } +} + + +/* Just like gfmul, except we have already looked up the log of the + * second number. + */ +static inline __u8 gfmul_exp(__u8 a, int b) +{ + if (a) { + return gfpow[mod255(gflog[a] + b)]; + } else { + return 0; + } +} + + +/* Just like gfmul_exp, except that A is a vector of numbers. That + * is, each byte in A gets multiplied by gfpow[mod255(B)]. + */ +static inline unsigned long gfmul_exp_long(unsigned long a, int b) +{ + __u8 t; + + if (sizeof(long) == 4) { + return ( + ((t = (__u32)a >> 24 & 0xff) ? + (((__u32) gfpow[mod255(gflog[t] + b)]) << 24) : 0) | + ((t = (__u32)a >> 16 & 0xff) ? + (((__u32) gfpow[mod255(gflog[t] + b)]) << 16) : 0) | + ((t = (__u32)a >> 8 & 0xff) ? + (((__u32) gfpow[mod255(gflog[t] + b)]) << 8) : 0) | + ((t = (__u32)a >> 0 & 0xff) ? + (((__u32) gfpow[mod255(gflog[t] + b)]) << 0) : 0)); + } else if (sizeof(long) == 8) { + return ( + ((t = (__u64)a >> 56 & 0xff) ? + (((__u64) gfpow[mod255(gflog[t] + b)]) << 56) : 0) | + ((t = (__u64)a >> 48 & 0xff) ? + (((__u64) gfpow[mod255(gflog[t] + b)]) << 48) : 0) | + ((t = (__u64)a >> 40 & 0xff) ? + (((__u64) gfpow[mod255(gflog[t] + b)]) << 40) : 0) | + ((t = (__u64)a >> 32 & 0xff) ? + (((__u64) gfpow[mod255(gflog[t] + b)]) << 32) : 0) | + ((t = (__u64)a >> 24 & 0xff) ? + (((__u64) gfpow[mod255(gflog[t] + b)]) << 24) : 0) | + ((t = (__u64)a >> 16 & 0xff) ? + (((__u64) gfpow[mod255(gflog[t] + b)]) << 16) : 0) | + ((t = (__u64)a >> 8 & 0xff) ? + (((__u64) gfpow[mod255(gflog[t] + b)]) << 8) : 0) | + ((t = (__u64)a >> 0 & 0xff) ? + (((__u64) gfpow[mod255(gflog[t] + b)]) << 0) : 0)); + } else { + TRACE_FUN(ft_t_any); + TRACE_ABORT(-1, ft_t_err, "Error: size of long is %d bytes", + (int)sizeof(long)); + } +} + + +/* Divide two numbers in the field. Returns a/b (modulo f(x)). + */ +static inline __u8 gfdiv(__u8 a, __u8 b) +{ + if (!b) { + TRACE_FUN(ft_t_any); + TRACE_ABORT(0xff, ft_t_bug, "Error: division by zero"); + } else if (a == 0) { + return 0; + } else { + return gfpow[mod255(gflog[a] - gflog[b])]; + } +} + + +/* The following functions return the inverse of the matrix of the + * linear system that needs to be solved to determine the error + * magnitudes. The first deals with matrices of rank 3, while the + * second deals with matrices of rank 2. The error indices are passed + * in arguments L0,..,L2 (0=first sector, 31=last sector). The error + * indices must be sorted in ascending order, i.e., L0<L1<L2. + * + * The linear system that needs to be solved for the error magnitudes + * is A * b = s, where s is the known vector of syndromes, b is the + * vector of error magnitudes and A in the ORDER=3 case: + * + * A_3 = {{1/r^L[0], 1/r^L[1], 1/r^L[2]}, + * { 1, 1, 1}, + * { r^L[0], r^L[1], r^L[2]}} + */ +static inline int gfinv3(__u8 l0, + __u8 l1, + __u8 l2, + Matrix Ainv) +{ + __u8 det; + __u8 t20, t10, t21, t12, t01, t02; + int log_det; + + /* compute some intermediate results: */ + t20 = gfpow[l2 - l0]; /* t20 = r^l2/r^l0 */ + t10 = gfpow[l1 - l0]; /* t10 = r^l1/r^l0 */ + t21 = gfpow[l2 - l1]; /* t21 = r^l2/r^l1 */ + t12 = gfpow[l1 - l2 + 255]; /* t12 = r^l1/r^l2 */ + t01 = gfpow[l0 - l1 + 255]; /* t01 = r^l0/r^l1 */ + t02 = gfpow[l0 - l2 + 255]; /* t02 = r^l0/r^l2 */ + /* Calculate the determinant of matrix A_3^-1 (sometimes + * called the Vandermonde determinant): + */ + det = gfadd(t20, gfadd(t10, gfadd(t21, gfadd(t12, gfadd(t01, t02))))); + if (!det) { + TRACE_FUN(ft_t_any); + TRACE_ABORT(0, ft_t_err, + "Inversion failed (3 CRC errors, >0 CRC failures)"); + } + log_det = 255 - gflog[det]; + + /* Now, calculate all of the coefficients: + */ + Ainv[0][0]= gfmul_exp(gfadd(gfpow[l1], gfpow[l2]), log_det); + Ainv[0][1]= gfmul_exp(gfadd(t21, t12), log_det); + Ainv[0][2]= gfmul_exp(gfadd(gfpow[255 - l1], gfpow[255 - l2]),log_det); + + Ainv[1][0]= gfmul_exp(gfadd(gfpow[l0], gfpow[l2]), log_det); + Ainv[1][1]= gfmul_exp(gfadd(t20, t02), log_det); + Ainv[1][2]= gfmul_exp(gfadd(gfpow[255 - l0], gfpow[255 - l2]),log_det); + + Ainv[2][0]= gfmul_exp(gfadd(gfpow[l0], gfpow[l1]), log_det); + Ainv[2][1]= gfmul_exp(gfadd(t10, t01), log_det); + Ainv[2][2]= gfmul_exp(gfadd(gfpow[255 - l0], gfpow[255 - l1]),log_det); + + return 1; +} + + +static inline int gfinv2(__u8 l0, __u8 l1, Matrix Ainv) +{ + __u8 det; + __u8 t1, t2; + int log_det; + + t1 = gfpow[255 - l0]; + t2 = gfpow[255 - l1]; + det = gfadd(t1, t2); + if (!det) { + TRACE_FUN(ft_t_any); + TRACE_ABORT(0, ft_t_err, + "Inversion failed (2 CRC errors, >0 CRC failures)"); + } + log_det = 255 - gflog[det]; + + /* Now, calculate all of the coefficients: + */ + Ainv[0][0] = Ainv[1][0] = gfpow[log_det]; + + Ainv[0][1] = gfmul_exp(t2, log_det); + Ainv[1][1] = gfmul_exp(t1, log_det); + + return 1; +} + + +/* Multiply matrix A by vector S and return result in vector B. M is + * assumed to be of order NxN, S and B of order Nx1. + */ +static inline void gfmat_mul(int n, Matrix A, + __u8 *s, __u8 *b) +{ + int i, j; + __u8 dot_prod; + + for (i = 0; i < n; ++i) { + dot_prod = 0; + for (j = 0; j < n; ++j) { + dot_prod = gfadd(dot_prod, gfmul(A[i][j], s[j])); + } + b[i] = dot_prod; + } +} + + + +/* The Reed Solomon ECC codes are computed over the N-th byte of each + * block, where N=SECTOR_SIZE. There are up to 29 blocks of data, and + * 3 blocks of ECC. The blocks are stored contiguously in memory. A + * segment, consequently, is assumed to have at least 4 blocks: one or + * more data blocks plus three ECC blocks. + * + * Notice: In QIC-80 speak, a CRC error is a sector with an incorrect + * CRC. A CRC failure is a sector with incorrect data, but + * a valid CRC. In the error control literature, the former + * is usually called "erasure", the latter "error." + */ +/* Compute the parity bytes for C columns of data, where C is the + * number of bytes that fit into a long integer. We use a linear + * feed-back register to do this. The parity bytes P[0], P[STRIDE], + * P[2*STRIDE] are computed such that: + * + * x^k * p(x) + m(x) = 0 (modulo g(x)) + * + * where k = NBLOCKS, + * p(x) = P[0] + P[STRIDE]*x + P[2*STRIDE]*x^2, and + * m(x) = sum_{i=0}^k m_i*x^i. + * m_i = DATA[i*SECTOR_SIZE] + */ +static inline void set_parity(unsigned long *data, + int nblocks, + unsigned long *p, + int stride) +{ + unsigned long p0, p1, p2, t1, t2, *end; + + end = data + nblocks * (FT_SECTOR_SIZE / sizeof(long)); + p0 = p1 = p2 = 0; + while (data < end) { + /* The new parity bytes p0_i, p1_i, p2_i are computed + * from the old values p0_{i-1}, p1_{i-1}, p2_{i-1} + * recursively as: + * + * p0_i = p1_{i-1} + r^105 * (m_{i-1} - p0_{i-1}) + * p1_i = p2_{i-1} + r^105 * (m_{i-1} - p0_{i-1}) + * p2_i = (m_{i-1} - p0_{i-1}) + * + * With the initial condition: p0_0 = p1_0 = p2_0 = 0. + */ + t1 = gfadd_long(*data, p0); + /* + * Multiply each byte in t1 by 0xc0: + */ + if (sizeof(long) == 4) { + t2= (((__u32) gfmul_c0[(__u32)t1 >> 24 & 0xff]) << 24 | + ((__u32) gfmul_c0[(__u32)t1 >> 16 & 0xff]) << 16 | + ((__u32) gfmul_c0[(__u32)t1 >> 8 & 0xff]) << 8 | + ((__u32) gfmul_c0[(__u32)t1 >> 0 & 0xff]) << 0); + } else if (sizeof(long) == 8) { + t2= (((__u64) gfmul_c0[(__u64)t1 >> 56 & 0xff]) << 56 | + ((__u64) gfmul_c0[(__u64)t1 >> 48 & 0xff]) << 48 | + ((__u64) gfmul_c0[(__u64)t1 >> 40 & 0xff]) << 40 | + ((__u64) gfmul_c0[(__u64)t1 >> 32 & 0xff]) << 32 | + ((__u64) gfmul_c0[(__u64)t1 >> 24 & 0xff]) << 24 | + ((__u64) gfmul_c0[(__u64)t1 >> 16 & 0xff]) << 16 | + ((__u64) gfmul_c0[(__u64)t1 >> 8 & 0xff]) << 8 | + ((__u64) gfmul_c0[(__u64)t1 >> 0 & 0xff]) << 0); + } else { + TRACE_FUN(ft_t_any); + TRACE(ft_t_err, "Error: long is of size %d", + (int) sizeof(long)); + TRACE_EXIT; + } + p0 = gfadd_long(t2, p1); + p1 = gfadd_long(t2, p2); + p2 = t1; + data += FT_SECTOR_SIZE / sizeof(long); + } + *p = p0; + p += stride; + *p = p1; + p += stride; + *p = p2; + return; +} + + +/* Compute the 3 syndrome values. DATA should point to the first byte + * of the column for which the syndromes are desired. The syndromes + * are computed over the first NBLOCKS of rows. The three bytes will + * be placed in S[0], S[1], and S[2]. + * + * S[i] is the value of the "message" polynomial m(x) evaluated at the + * i-th root of the generator polynomial g(x). + * + * As g(x)=(x-r^-1)(x-1)(x-r^1) we evaluate the message polynomial at + * x=r^-1 to get S[0], at x=r^0=1 to get S[1], and at x=r to get S[2]. + * This could be done directly and efficiently via the Horner scheme. + * However, it would require multiplication tables for the factors + * r^-1 (0xc3) and r (0x02). The following scheme does not require + * any multiplication tables beyond what's needed for set_parity() + * anyway and is slightly faster if there are no errors and slightly + * slower if there are errors. The latter is hopefully the infrequent + * case. + * + * To understand the alternative algorithm, notice that set_parity(m, + * k, p) computes parity bytes such that: + * + * x^k * p(x) = m(x) (modulo g(x)). + * + * That is, to evaluate m(r^m), where r^m is a root of g(x), we can + * simply evaluate (r^m)^k*p(r^m). Also, notice that p is 0 if and + * only if s is zero. That is, if all parity bytes are 0, we know + * there is no error in the data and consequently there is no need to + * compute s(x) at all! In all other cases, we compute s(x) from p(x) + * by evaluating (r^m)^k*p(r^m) for m=-1, m=0, and m=1. The p(x) + * polynomial is evaluated via the Horner scheme. + */ +static int compute_syndromes(unsigned long *data, int nblocks, unsigned long *s) +{ + unsigned long p[3]; + + set_parity(data, nblocks, p, 1); + if (p[0] | p[1] | p[2]) { + /* Some of the checked columns do not have a zero + * syndrome. For simplicity, we compute the syndromes + * for all columns that we have computed the + * remainders for. + */ + s[0] = gfmul_exp_long( + gfadd_long(p[0], + gfmul_exp_long( + gfadd_long(p[1], + gfmul_exp_long(p[2], -1)), + -1)), + -nblocks); + s[1] = gfadd_long(gfadd_long(p[2], p[1]), p[0]); + s[2] = gfmul_exp_long( + gfadd_long(p[0], + gfmul_exp_long( + gfadd_long(p[1], + gfmul_exp_long(p[2], 1)), + 1)), + nblocks); + return 0; + } else { + return 1; + } +} + + +/* Correct the block in the column pointed to by DATA. There are NBAD + * CRC errors and their indices are in BAD_LOC[0], up to + * BAD_LOC[NBAD-1]. If NBAD>1, Ainv holds the inverse of the matrix + * of the linear system that needs to be solved to determine the error + * magnitudes. S[0], S[1], and S[2] are the syndrome values. If row + * j gets corrected, then bit j will be set in CORRECTION_MAP. + */ +static inline int correct_block(__u8 *data, int nblocks, + int nbad, int *bad_loc, Matrix Ainv, + __u8 *s, + SectorMap * correction_map) +{ + int ncorrected = 0; + int i; + __u8 t1, t2; + __u8 c0, c1, c2; /* check bytes */ + __u8 error_mag[3], log_error_mag; + __u8 *dp, l, e; + TRACE_FUN(ft_t_any); + + switch (nbad) { + case 0: + /* might have a CRC failure: */ + if (s[0] == 0) { + /* more than one error */ + TRACE_ABORT(-1, ft_t_err, + "ECC failed (0 CRC errors, >1 CRC failures)"); + } + t1 = gfdiv(s[1], s[0]); + if ((bad_loc[nbad++] = gflog[t1]) >= nblocks) { + TRACE(ft_t_err, + "ECC failed (0 CRC errors, >1 CRC failures)"); + TRACE_ABORT(-1, ft_t_err, + "attempt to correct data at %d", bad_loc[0]); + } + error_mag[0] = s[1]; + break; + case 1: + t1 = gfadd(gfmul_exp(s[1], bad_loc[0]), s[2]); + t2 = gfadd(gfmul_exp(s[0], bad_loc[0]), s[1]); + if (t1 == 0 && t2 == 0) { + /* one erasure, no error: */ + Ainv[0][0] = gfpow[bad_loc[0]]; + } else if (t1 == 0 || t2 == 0) { + /* one erasure and more than one error: */ + TRACE_ABORT(-1, ft_t_err, + "ECC failed (1 erasure, >1 error)"); + } else { + /* one erasure, one error: */ + if ((bad_loc[nbad++] = gflog[gfdiv(t1, t2)]) + >= nblocks) { + TRACE(ft_t_err, "ECC failed " + "(1 CRC errors, >1 CRC failures)"); + TRACE_ABORT(-1, ft_t_err, + "attempt to correct data at %d", + bad_loc[1]); + } + if (!gfinv2(bad_loc[0], bad_loc[1], Ainv)) { + /* inversion failed---must have more + * than one error + */ + TRACE_EXIT -1; + } + } + /* FALL THROUGH TO ERROR MAGNITUDE COMPUTATION: + */ + case 2: + case 3: + /* compute error magnitudes: */ + gfmat_mul(nbad, Ainv, s, error_mag); + break; + + default: + TRACE_ABORT(-1, ft_t_err, + "Internal Error: number of CRC errors > 3"); + } + + /* Perform correction by adding ERROR_MAG[i] to the byte at + * offset BAD_LOC[i]. Also add the value of the computed + * error polynomial to the syndrome values. If the correction + * was successful, the resulting check bytes should be zero + * (i.e., the corrected data is a valid code word). + */ + c0 = s[0]; + c1 = s[1]; + c2 = s[2]; + for (i = 0; i < nbad; ++i) { + e = error_mag[i]; + if (e) { + /* correct the byte at offset L by magnitude E: */ + l = bad_loc[i]; + dp = &data[l * FT_SECTOR_SIZE]; + *dp = gfadd(*dp, e); + *correction_map |= 1 << l; + ++ncorrected; + + log_error_mag = gflog[e]; + c0 = gfadd(c0, gfpow[mod255(log_error_mag - l)]); + c1 = gfadd(c1, e); + c2 = gfadd(c2, gfpow[mod255(log_error_mag + l)]); + } + } + if (c0 || c1 || c2) { + TRACE_ABORT(-1, ft_t_err, + "ECC self-check failed, too many errors"); + } + TRACE_EXIT ncorrected; +} + + +#if defined(ECC_SANITY_CHECK) || defined(ECC_PARANOID) + +/* Perform a sanity check on the computed parity bytes: + */ +static int sanity_check(unsigned long *data, int nblocks) +{ + TRACE_FUN(ft_t_any); + unsigned long s[3]; + + if (!compute_syndromes(data, nblocks, s)) { + TRACE_ABORT(0, ft_bug, + "Internal Error: syndrome self-check failed"); + } + TRACE_EXIT 1; +} + +#endif /* defined(ECC_SANITY_CHECK) || defined(ECC_PARANOID) */ + +/* Compute the parity for an entire segment of data. + */ +int ftape_ecc_set_segment_parity(struct memory_segment *mseg) +{ + int i; + __u8 *parity_bytes; + + parity_bytes = &mseg->data[(mseg->blocks - 3) * FT_SECTOR_SIZE]; + for (i = 0; i < FT_SECTOR_SIZE; i += sizeof(long)) { + set_parity((unsigned long *) &mseg->data[i], mseg->blocks - 3, + (unsigned long *) &parity_bytes[i], + FT_SECTOR_SIZE / sizeof(long)); +#ifdef ECC_PARANOID + if (!sanity_check((unsigned long *) &mseg->data[i], + mseg->blocks)) { + return -1; + } +#endif /* ECC_PARANOID */ + } + return 0; +} + + +/* Checks and corrects (if possible) the segment MSEG. Returns one of + * ECC_OK, ECC_CORRECTED, and ECC_FAILED. + */ +int ftape_ecc_correct_data(struct memory_segment *mseg) +{ + int col, i, result; + int ncorrected = 0; + int nerasures = 0; /* # of erasures (CRC errors) */ + int erasure_loc[3]; /* erasure locations */ + unsigned long ss[3]; + __u8 s[3]; + Matrix Ainv; + TRACE_FUN(ft_t_flow); + + mseg->corrected = 0; + + /* find first column that has non-zero syndromes: */ + for (col = 0; col < FT_SECTOR_SIZE; col += sizeof(long)) { + if (!compute_syndromes((unsigned long *) &mseg->data[col], + mseg->blocks, ss)) { + /* something is wrong---have to fix things */ + break; + } + } + if (col >= FT_SECTOR_SIZE) { + /* all syndromes are ok, therefore nothing to correct */ + TRACE_EXIT ECC_OK; + } + /* count the number of CRC errors if there were any: */ + if (mseg->read_bad) { + for (i = 0; i < mseg->blocks; i++) { + if (BAD_CHECK(mseg->read_bad, i)) { + if (nerasures >= 3) { + /* this is too much for ECC */ + TRACE_ABORT(ECC_FAILED, ft_t_err, + "ECC failed (>3 CRC errors)"); + } /* if */ + erasure_loc[nerasures++] = i; + } + } + } + /* + * If there are at least 2 CRC errors, determine inverse of matrix + * of linear system to be solved: + */ + switch (nerasures) { + case 2: + if (!gfinv2(erasure_loc[0], erasure_loc[1], Ainv)) { + TRACE_EXIT ECC_FAILED; + } + break; + case 3: + if (!gfinv3(erasure_loc[0], erasure_loc[1], + erasure_loc[2], Ainv)) { + TRACE_EXIT ECC_FAILED; + } + break; + default: + /* this is not an error condition... */ + break; + } + + do { + for (i = 0; i < sizeof(long); ++i) { + s[0] = ss[0]; + s[1] = ss[1]; + s[2] = ss[2]; + if (s[0] | s[1] | s[2]) { +#ifdef BIG_ENDIAN + result = correct_block( + &mseg->data[col + sizeof(long) - 1 - i], + mseg->blocks, + nerasures, + erasure_loc, + Ainv, + s, + &mseg->corrected); +#else + result = correct_block(&mseg->data[col + i], + mseg->blocks, + nerasures, + erasure_loc, + Ainv, + s, + &mseg->corrected); +#endif + if (result < 0) { + TRACE_EXIT ECC_FAILED; + } + ncorrected += result; + } + ss[0] >>= 8; + ss[1] >>= 8; + ss[2] >>= 8; + } + +#ifdef ECC_SANITY_CHECK + if (!sanity_check((unsigned long *) &mseg->data[col], + mseg->blocks)) { + TRACE_EXIT ECC_FAILED; + } +#endif /* ECC_SANITY_CHECK */ + + /* find next column with non-zero syndromes: */ + while ((col += sizeof(long)) < FT_SECTOR_SIZE) { + if (!compute_syndromes((unsigned long *) + &mseg->data[col], mseg->blocks, ss)) { + /* something is wrong---have to fix things */ + break; + } + } + } while (col < FT_SECTOR_SIZE); + if (ncorrected && nerasures == 0) { + TRACE(ft_t_warn, "block contained error not caught by CRC"); + } + TRACE((ncorrected > 0) ? ft_t_noise : ft_t_any, "number of corrections: %d", ncorrected); + TRACE_EXIT ncorrected ? ECC_CORRECTED : ECC_OK; +} diff --git a/drivers/char/ftape/lowlevel/ftape-ecc.h b/drivers/char/ftape/lowlevel/ftape-ecc.h new file mode 100644 index 000000000000..4829146fe9a0 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-ecc.h @@ -0,0 +1,84 @@ +#ifndef _FTAPE_ECC_H_ +#define _FTAPE_ECC_H_ + +/* + * Copyright (C) 1993 Ning and David Mosberger. + * Original: + * Copyright (C) 1993 Bas Laarhoven. + * Copyright (C) 1992 David L. Brown, Jr. + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2, or (at + your option) any later version. + + This program is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, + USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-ecc.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:11 $ + * + * This file contains the definitions for the + * Reed-Solomon error correction code + * for the QIC-40/80 tape streamer device driver. + */ + +#include "../lowlevel/ftape-bsm.h" + +#define BAD_CLEAR(entry) ((entry)=0) +#define BAD_SET(entry,sector) ((entry)|=(1<<(sector))) +#define BAD_CHECK(entry,sector) ((entry)&(1<<(sector))) + +/* + * Return values for ecc_correct_data: + */ +enum { + ECC_OK, /* Data was correct. */ + ECC_CORRECTED, /* Correctable error in data. */ + ECC_FAILED, /* Could not correct data. */ +}; + +/* + * Representation of an in memory segment. MARKED_BAD lists the + * sectors that were marked bad during formatting. If the N-th sector + * in a segment is marked bad, bit 1<<N will be set in MARKED_BAD. + * The sectors should be read in from the disk and packed, as if the + * bad sectors were not there, and the segment just contained fewer + * sectors. READ_SECTORS is a bitmap of errors encountered while + * reading the data. These offsets are relative to the packed data. + * BLOCKS is a count of the sectors not marked bad. This is just to + * prevent having to count the zero bits in MARKED_BAD each time this + * is needed. DATA is the actual sector packed data from (or to) the + * tape. + */ + struct memory_segment { + SectorMap marked_bad; + SectorMap read_bad; + int blocks; + __u8 *data; + SectorMap corrected; + }; + +/* + * ecc.c defined global variables: + */ +#ifdef TEST +extern int ftape_ecc_tracing; +#endif + +/* + * ecc.c defined global functions: + */ +extern int ftape_ecc_correct_data(struct memory_segment *data); +extern int ftape_ecc_set_segment_parity(struct memory_segment *data); + +#endif /* _FTAPE_ECC_H_ */ diff --git a/drivers/char/ftape/lowlevel/ftape-format.c b/drivers/char/ftape/lowlevel/ftape-format.c new file mode 100644 index 000000000000..5dd4c59a3f34 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-format.c @@ -0,0 +1,344 @@ +/* + * Copyright (C) 1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-format.c,v $ + * $Revision: 1.2.4.1 $ + * $Date: 1997/11/14 16:05:39 $ + * + * This file contains the code to support formatting of floppy + * tape cartridges with the QIC-40/80/3010/3020 floppy-tape + * driver "ftape" for Linux. + */ + +#include <linux/string.h> +#include <linux/errno.h> + +#include <linux/ftape.h> +#include <linux/qic117.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-ecc.h" +#include "../lowlevel/ftape-bsm.h" +#include "../lowlevel/ftape-format.h" + +#if defined(TESTING) +#define FT_FMT_SEGS_PER_BUF 50 +#else +#define FT_FMT_SEGS_PER_BUF (FT_BUFF_SIZE/(4*FT_SECTORS_PER_SEGMENT)) +#endif + +static spinlock_t ftape_format_lock; + +/* + * first segment of the new buffer + */ +static int switch_segment; + +/* + * at most 256 segments fit into one 32 kb buffer. Even TR-1 cartridges have + * more than this many segments per track, so better be careful. + * + * buffer_struct *buff: buffer to store the formatting coordinates in + * int start: starting segment for this buffer. + * int spt: segments per track + * + * Note: segment ids are relative to the start of the track here. + */ +static void setup_format_buffer(buffer_struct *buff, int start, int spt, + __u8 gap3) +{ + int to_do = spt - start; + TRACE_FUN(ft_t_flow); + + if (to_do > FT_FMT_SEGS_PER_BUF) { + to_do = FT_FMT_SEGS_PER_BUF; + } + buff->ptr = buff->address; + buff->remaining = to_do * FT_SECTORS_PER_SEGMENT; /* # sectors */ + buff->bytes = buff->remaining * 4; /* need 4 bytes per sector */ + buff->gap3 = gap3; + buff->segment_id = start; + buff->next_segment = start + to_do; + if (buff->next_segment >= spt) { + buff->next_segment = 0; /* 0 means: stop runner */ + } + buff->status = waiting; /* tells the isr that it can use + * this buffer + */ + TRACE_EXIT; +} + + +/* + * start formatting a new track. + */ +int ftape_format_track(const unsigned int track, const __u8 gap3) +{ + unsigned long flags; + buffer_struct *tail, *head; + int status; + TRACE_FUN(ft_t_flow); + + TRACE_CATCH(ftape_ready_wait(ftape_timeout.pause, &status),); + if (track & 1) { + if (!(status & QIC_STATUS_AT_EOT)) { + TRACE_CATCH(ftape_seek_to_eot(),); + } + } else { + if (!(status & QIC_STATUS_AT_BOT)) { + TRACE_CATCH(ftape_seek_to_bot(),); + } + } + ftape_abort_operation(); /* this sets ft_head = ft_tail = 0 */ + ftape_set_state(formatting); + + TRACE(ft_t_noise, + "Formatting track %d, logical: from segment %d to %d", + track, track * ft_segments_per_track, + (track + 1) * ft_segments_per_track - 1); + + /* + * initialize the buffer switching protocol for this track + */ + head = ftape_get_buffer(ft_queue_head); /* tape isn't running yet */ + tail = ftape_get_buffer(ft_queue_tail); /* tape isn't running yet */ + switch_segment = 0; + do { + FT_SIGNAL_EXIT(_DONT_BLOCK); + setup_format_buffer(tail, switch_segment, + ft_segments_per_track, gap3); + switch_segment = tail->next_segment; + } while ((switch_segment != 0) && + ((tail = ftape_next_buffer(ft_queue_tail)) != head)); + /* go */ + head->status = formatting; + TRACE_CATCH(ftape_seek_head_to_track(track),); + TRACE_CATCH(ftape_command(QIC_LOGICAL_FORWARD),); + spin_lock_irqsave(&ftape_format_lock, flags); + TRACE_CATCH(fdc_setup_formatting(head), restore_flags(flags)); + spin_unlock_irqrestore(&ftape_format_lock, flags); + TRACE_EXIT 0; +} + +/* return segment id of segment currently being formatted and do the + * buffer switching stuff. + */ +int ftape_format_status(unsigned int *segment_id) +{ + buffer_struct *tail = ftape_get_buffer(ft_queue_tail); + int result; + TRACE_FUN(ft_t_flow); + + while (switch_segment != 0 && + ftape_get_buffer(ft_queue_head) != tail) { + FT_SIGNAL_EXIT(_DONT_BLOCK); + /* need more buffers, first wait for empty buffer + */ + TRACE_CATCH(ftape_wait_segment(formatting),); + /* don't worry for gap3. If we ever hit this piece of code, + * then all buffer already have the correct gap3 set! + */ + setup_format_buffer(tail, switch_segment, + ft_segments_per_track, tail->gap3); + switch_segment = tail->next_segment; + if (switch_segment != 0) { + tail = ftape_next_buffer(ft_queue_tail); + } + } + /* should runner stop ? + */ + if (ft_runner_status == aborting || ft_runner_status == do_abort) { + buffer_struct *head = ftape_get_buffer(ft_queue_head); + TRACE(ft_t_warn, "Error formatting segment %d", + ftape_get_buffer(ft_queue_head)->segment_id); + (void)ftape_abort_operation(); + TRACE_EXIT (head->status != error) ? -EAGAIN : -EIO; + } + /* + * don't care if the timer expires, this is just kind of a + * "select" operation that lets the calling process sleep + * until something has happened + */ + if (fdc_interrupt_wait(5 * FT_SECOND) < 0) { + TRACE(ft_t_noise, "End of track %d at segment %d", + ft_location.track, + ftape_get_buffer(ft_queue_head)->segment_id); + result = 1; /* end of track, unlock module */ + } else { + result = 0; + } + /* + * the calling process should use the seg id to determine + * which parts of the dma buffers can be safely overwritten + * with new data. + */ + *segment_id = ftape_get_buffer(ft_queue_head)->segment_id; + /* + * Internally we start counting segment ids from the start of + * each track when formatting, but externally we keep them + * relative to the start of the tape: + */ + *segment_id += ft_location.track * ft_segments_per_track; + TRACE_EXIT result; +} + +/* + * The segment id is relative to the start of the tape + */ +int ftape_verify_segment(const unsigned int segment_id, SectorMap *bsm) +{ + int result; + int verify_done = 0; + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "Verifying segment %d", segment_id); + + if (ft_driver_state != verifying) { + TRACE(ft_t_noise, "calling ftape_abort_operation"); + if (ftape_abort_operation() < 0) { + TRACE(ft_t_err, "ftape_abort_operation failed"); + TRACE_EXIT -EIO; + } + } + *bsm = 0x00000000; + ftape_set_state(verifying); + for (;;) { + buffer_struct *tail; + /* + * Allow escape from this loop on signal + */ + FT_SIGNAL_EXIT(_DONT_BLOCK); + /* + * Search all full buffers for the first matching the + * wanted segment. Clear other buffers on the fly. + */ + tail = ftape_get_buffer(ft_queue_tail); + while (!verify_done && tail->status == done) { + /* + * Allow escape from this loop on signal ! + */ + FT_SIGNAL_EXIT(_DONT_BLOCK); + if (tail->segment_id == segment_id) { + /* If out buffer is already full, + * return its contents. + */ + TRACE(ft_t_flow, "found segment in cache: %d", + segment_id); + if ((tail->soft_error_map | + tail->hard_error_map) != 0) { + TRACE(ft_t_info,"bsm[%d] = 0x%08lx", + segment_id, + (unsigned long) + (tail->soft_error_map | + tail->hard_error_map)); + *bsm = (tail->soft_error_map | + tail->hard_error_map); + } + verify_done = 1; + } else { + TRACE(ft_t_flow,"zapping segment in cache: %d", + tail->segment_id); + } + tail->status = waiting; + tail = ftape_next_buffer(ft_queue_tail); + } + if (!verify_done && tail->status == verifying) { + if (tail->segment_id == segment_id) { + switch(ftape_wait_segment(verifying)) { + case 0: + break; + case -EINTR: + TRACE_ABORT(-EINTR, ft_t_warn, + "interrupted by " + "non-blockable signal"); + break; + default: + ftape_abort_operation(); + ftape_set_state(verifying); + /* be picky */ + TRACE_ABORT(-EIO, ft_t_warn, + "wait_segment failed"); + } + } else { + /* We're reading the wrong segment, + * stop runner. + */ + TRACE(ft_t_noise, "verifying wrong segment"); + ftape_abort_operation(); + ftape_set_state(verifying); + } + } + /* should runner stop ? + */ + if (ft_runner_status == aborting) { + buffer_struct *head = ftape_get_buffer(ft_queue_head); + if (head->status == error || + head->status == verifying) { + /* no data or overrun error */ + head->status = waiting; + } + TRACE_CATCH(ftape_dumb_stop(),); + } else { + /* If just passed last segment on tape: wait + * for BOT or EOT mark. Sets ft_runner_status to + * idle if at lEOT and successful + */ + TRACE_CATCH(ftape_handle_logical_eot(),); + } + if (verify_done) { + TRACE_EXIT 0; + } + /* Now at least one buffer is idle! + * Restart runner & tape if needed. + */ + /* We could optimize the following a little bit. We know that + * the bad sector map is empty. + */ + tail = ftape_get_buffer(ft_queue_tail); + if (tail->status == waiting) { + buffer_struct *head = ftape_get_buffer(ft_queue_head); + + ftape_setup_new_segment(head, segment_id, -1); + ftape_calc_next_cluster(head); + if (ft_runner_status == idle) { + result = ftape_start_tape(segment_id, + head->sector_offset); + switch(result) { + case 0: + break; + case -ETIME: + case -EINTR: + TRACE_ABORT(result, ft_t_err, "Error: " + "segment %d unreachable", + segment_id); + break; + default: + *bsm = EMPTY_SEGMENT; + TRACE_EXIT 0; + break; + } + } + head->status = verifying; + fdc_setup_read_write(head, FDC_VERIFY); + } + } + /* not reached */ + TRACE_EXIT -EIO; +} diff --git a/drivers/char/ftape/lowlevel/ftape-format.h b/drivers/char/ftape/lowlevel/ftape-format.h new file mode 100644 index 000000000000..f15161566643 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-format.h @@ -0,0 +1,37 @@ +#ifndef _FTAPE_FORMAT_H +#define _FTAPE_FORMAT_H + +/* + * Copyright (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-format.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:13 $ + * + * This file contains the low level definitions for the + * formatting support for the QIC-40/80/3010/3020 floppy-tape + * driver "ftape" for Linux. + */ + +#ifdef __KERNEL__ +extern int ftape_format_track(const unsigned int track, const __u8 gap3); +extern int ftape_format_status(unsigned int *segment_id); +extern int ftape_verify_segment(const unsigned int segment_id, SectorMap *bsm); +#endif /* __KERNEL__ */ + +#endif diff --git a/drivers/char/ftape/lowlevel/ftape-init.c b/drivers/char/ftape/lowlevel/ftape-init.c new file mode 100644 index 000000000000..b54260d457c2 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-init.c @@ -0,0 +1,161 @@ +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * This file contains the code that interfaces the kernel + * for the QIC-40/80/3010/3020 floppy-tape driver for Linux. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/fs.h> +#include <linux/kernel.h> +#include <linux/signal.h> +#include <linux/major.h> + +#include <linux/ftape.h> +#include <linux/init.h> +#include <linux/qic117.h> +#ifdef CONFIG_ZFTAPE +#include <linux/zftape.h> +#endif + +#include "../lowlevel/ftape-init.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-read.h" +#include "../lowlevel/ftape-write.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/fdc-io.h" +#include "../lowlevel/ftape-buffer.h" +#include "../lowlevel/ftape-proc.h" +#include "../lowlevel/ftape-tracing.h" + + +#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL) +static int ft_tracing = -1; +#endif + + +/* Called by modules package when installing the driver + * or by kernel during the initialization phase + */ +static int __init ftape_init(void) +{ + TRACE_FUN(ft_t_flow); + +#ifdef MODULE +#ifndef CONFIG_FT_NO_TRACE_AT_ALL + if (ft_tracing != -1) { + ftape_tracing = ft_tracing; + } +#endif + printk(KERN_INFO FTAPE_VERSION "\n"); + if (TRACE_LEVEL >= ft_t_info) { + printk( +KERN_INFO "(c) 1993-1996 Bas Laarhoven (bas@vimec.nl)\n" +KERN_INFO "(c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no)\n" +KERN_INFO "(c) 1996-1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)\n" +KERN_INFO "QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives\n"); + } +#else /* !MODULE */ + /* print a short no-nonsense boot message */ + printk(KERN_INFO FTAPE_VERSION "\n"); +#endif /* MODULE */ + TRACE(ft_t_info, "installing QIC-117 floppy tape hardware drive ... "); + TRACE(ft_t_info, "ftape_init @ 0x%p", ftape_init); + /* Allocate the DMA buffers. They are deallocated at cleanup() time. + */ +#ifdef TESTING +#ifdef MODULE + while (ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS) < 0) { + ftape_sleep(FT_SECOND/20); + if (signal_pending(current)) { + (void)ftape_set_nr_buffers(0); + TRACE(ft_t_bug, + "Killed by signal while allocating buffers."); + TRACE_ABORT(-EINTR, + ft_t_bug, "Free up memory and retry"); + } + } +#else + TRACE_CATCH(ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS), + (void)ftape_set_nr_buffers(0)); +#endif +#else + TRACE_CATCH(ftape_set_nr_buffers(CONFIG_FT_NR_BUFFERS), + (void)ftape_set_nr_buffers(0)); +#endif + ft_drive_sel = -1; + ft_failure = 1; /* inhibit any operation but open */ + ftape_udelay_calibrate(); /* must be before fdc_wait_calibrate ! */ + fdc_wait_calibrate(); +#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) + (void)ftape_proc_init(); +#endif +#ifdef CONFIG_ZFTAPE + (void)zft_init(); +#endif + TRACE_EXIT 0; +} + +module_param(ft_fdc_base, uint, 0); +MODULE_PARM_DESC(ft_fdc_base, "Base address of FDC controller."); +module_param(ft_fdc_irq, uint, 0); +MODULE_PARM_DESC(ft_fdc_irq, "IRQ (interrupt channel) to use."); +module_param(ft_fdc_dma, uint, 0); +MODULE_PARM_DESC(ft_fdc_dma, "DMA channel to use."); +module_param(ft_fdc_threshold, uint, 0); +MODULE_PARM_DESC(ft_fdc_threshold, "Threshold of the FDC Fifo."); +module_param(ft_fdc_rate_limit, uint, 0); +MODULE_PARM_DESC(ft_fdc_rate_limit, "Maximal data rate for FDC."); +module_param(ft_probe_fc10, bool, 0); +MODULE_PARM_DESC(ft_probe_fc10, + "If non-zero, probe for a Colorado FC-10/FC-20 controller."); +module_param(ft_mach2, bool, 0); +MODULE_PARM_DESC(ft_mach2, + "If non-zero, probe for a Mountain MACH-2 controller."); +#if defined(MODULE) && !defined(CONFIG_FT_NO_TRACE_AT_ALL) +module_param(ft_tracing, int, 0644); +MODULE_PARM_DESC(ft_tracing, + "Amount of debugging output, 0 <= tracing <= 8, default 3."); +#endif + +MODULE_AUTHOR( + "(c) 1993-1996 Bas Laarhoven (bas@vimec.nl), " + "(c) 1995-1996 Kai Harrekilde-Petersen (khp@dolphinics.no), " + "(c) 1996, 1997 Claus-Justus Heine (claus@momo.math.rwth-aachen.de)"); +MODULE_DESCRIPTION( + "QIC-117 driver for QIC-40/80/3010/3020 floppy tape drives."); +MODULE_LICENSE("GPL"); + +static void __exit ftape_exit(void) +{ + TRACE_FUN(ft_t_flow); + +#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) + ftape_proc_destroy(); +#endif + (void)ftape_set_nr_buffers(0); + printk(KERN_INFO "ftape: unloaded.\n"); + TRACE_EXIT; +} + +module_init(ftape_init); +module_exit(ftape_exit); diff --git a/drivers/char/ftape/lowlevel/ftape-init.h b/drivers/char/ftape/lowlevel/ftape-init.h new file mode 100644 index 000000000000..99a7b8ab086f --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-init.h @@ -0,0 +1,43 @@ +#ifndef _FTAPE_INIT_H +#define _FTAPE_INIT_H + +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-init.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:16 $ + * + * This file contains the definitions for the interface to + * the Linux kernel for floppy tape driver ftape. + * + */ + +#include <linux/linkage.h> +#include <linux/signal.h> + +#define _NEVER_BLOCK (sigmask(SIGKILL) | sigmask(SIGSTOP)) +#define _DONT_BLOCK (_NEVER_BLOCK | sigmask(SIGINT)) +#define _DO_BLOCK (sigmask(SIGPIPE)) + +#ifndef QIC117_TAPE_MAJOR +#define QIC117_TAPE_MAJOR 27 +#endif + +#endif diff --git a/drivers/char/ftape/lowlevel/ftape-io.c b/drivers/char/ftape/lowlevel/ftape-io.c new file mode 100644 index 000000000000..259015aeff55 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-io.c @@ -0,0 +1,992 @@ +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996 Kai Harrekilde-Petersen, + * (C) 1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-io.c,v $ + * $Revision: 1.4 $ + * $Date: 1997/11/11 14:02:36 $ + * + * This file contains the general control functions for the + * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. + */ + +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/system.h> +#include <linux/ioctl.h> +#include <linux/mtio.h> +#include <linux/delay.h> + +#include <linux/ftape.h> +#include <linux/qic117.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/fdc-io.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-write.h" +#include "../lowlevel/ftape-read.h" +#include "../lowlevel/ftape-init.h" +#include "../lowlevel/ftape-calibr.h" + +/* Global vars. + */ +/* NOTE: sectors start numbering at 1, all others at 0 ! */ +ft_timeout_table ftape_timeout; +unsigned int ftape_tape_len; +volatile qic117_cmd_t ftape_current_command; +const struct qic117_command_table qic117_cmds[] = QIC117_COMMANDS; +int ftape_might_be_off_track; + +/* Local vars. + */ +static int diagnostic_mode; +static unsigned int ftape_udelay_count; +static unsigned int ftape_udelay_time; + +void ftape_udelay(unsigned int usecs) +{ + volatile int count = (ftape_udelay_count * usecs + + ftape_udelay_count - 1) / ftape_udelay_time; + volatile int i; + + while (count-- > 0) { + for (i = 0; i < 20; ++i); + } +} + +void ftape_udelay_calibrate(void) +{ + ftape_calibrate("ftape_udelay", + ftape_udelay, &ftape_udelay_count, &ftape_udelay_time); +} + +/* Delay (msec) routine. + */ +void ftape_sleep(unsigned int time) +{ + TRACE_FUN(ft_t_any); + + time *= 1000; /* msecs -> usecs */ + if (time < FT_USPT) { + /* Time too small for scheduler, do a busy wait ! */ + ftape_udelay(time); + } else { + long timeout; + unsigned long flags; + unsigned int ticks = (time + FT_USPT - 1) / FT_USPT; + + TRACE(ft_t_any, "%d msec, %d ticks", time/1000, ticks); + timeout = ticks; + save_flags(flags); + sti(); + msleep_interruptible(jiffies_to_msecs(timeout)); + /* Mmm. Isn't current->blocked == 0xffffffff ? + */ + if (signal_pending(current)) { + TRACE(ft_t_err, "awoken by non-blocked signal :-("); + } + restore_flags(flags); + } + TRACE_EXIT; +} + +/* send a command or parameter to the drive + * Generates # of step pulses. + */ +static inline int ft_send_to_drive(int arg) +{ + /* Always wait for a command_timeout period to separate + * individuals commands and/or parameters. + */ + ftape_sleep(3 * FT_MILLISECOND); + /* Keep cylinder nr within range, step towards home if possible. + */ + if (ftape_current_cylinder >= arg) { + return fdc_seek(ftape_current_cylinder - arg); + } else { + return fdc_seek(ftape_current_cylinder + arg); + } +} + +/* forward */ int ftape_report_raw_drive_status(int *status); + +static int ft_check_cmd_restrictions(qic117_cmd_t command) +{ + int status = -1; + TRACE_FUN(ft_t_any); + + TRACE(ft_t_flow, "%s", qic117_cmds[command].name); + /* A new motion command during an uninterruptible (motion) + * command requires a ready status before the new command can + * be issued. Otherwise a new motion command needs to be + * checked against required status. + */ + if (qic117_cmds[command].cmd_type == motion && + qic117_cmds[ftape_current_command].non_intr) { + ftape_report_raw_drive_status(&status); + if ((status & QIC_STATUS_READY) == 0) { + TRACE(ft_t_noise, + "motion cmd (%d) during non-intr cmd (%d)", + command, ftape_current_command); + TRACE(ft_t_noise, "waiting until drive gets ready"); + ftape_ready_wait(ftape_timeout.seek, + &status); + } + } + if (qic117_cmds[command].mask != 0) { + __u8 difference; + /* Some commands do require a certain status: + */ + if (status == -1) { /* not yet set */ + ftape_report_raw_drive_status(&status); + } + difference = ((status ^ qic117_cmds[command].state) & + qic117_cmds[command].mask); + /* Wait until the drive gets + * ready. This may last forever if + * the drive never gets ready... + */ + while ((difference & QIC_STATUS_READY) != 0) { + TRACE(ft_t_noise, "command %d issued while not ready", + command); + TRACE(ft_t_noise, "waiting until drive gets ready"); + if (ftape_ready_wait(ftape_timeout.seek, + &status) == -EINTR) { + /* Bail out on signal ! + */ + TRACE_ABORT(-EINTR, ft_t_warn, + "interrupted by non-blockable signal"); + } + difference = ((status ^ qic117_cmds[command].state) & + qic117_cmds[command].mask); + } + while ((difference & QIC_STATUS_ERROR) != 0) { + int err; + qic117_cmd_t cmd; + + TRACE(ft_t_noise, + "command %d issued while error pending", + command); + TRACE(ft_t_noise, "clearing error status"); + ftape_report_error(&err, &cmd, 1); + ftape_report_raw_drive_status(&status); + difference = ((status ^ qic117_cmds[command].state) & + qic117_cmds[command].mask); + if ((difference & QIC_STATUS_ERROR) != 0) { + /* Bail out on fatal signal ! + */ + FT_SIGNAL_EXIT(_NEVER_BLOCK); + } + } + if (difference) { + /* Any remaining difference can't be solved + * here. + */ + if (difference & (QIC_STATUS_CARTRIDGE_PRESENT | + QIC_STATUS_NEW_CARTRIDGE | + QIC_STATUS_REFERENCED)) { + TRACE(ft_t_warn, + "Fatal: tape removed or reinserted !"); + ft_failure = 1; + } else { + TRACE(ft_t_err, "wrong state: 0x%02x should be: 0x%02x", + status & qic117_cmds[command].mask, + qic117_cmds[command].state); + } + TRACE_EXIT -EIO; + } + if (~status & QIC_STATUS_READY & qic117_cmds[command].mask) { + TRACE_ABORT(-EBUSY, ft_t_err, "Bad: still busy!"); + } + } + TRACE_EXIT 0; +} + +/* Issue a tape command: + */ +int ftape_command(qic117_cmd_t command) +{ + int result = 0; + static int level; + TRACE_FUN(ft_t_any); + + if ((unsigned int)command > NR_ITEMS(qic117_cmds)) { + /* This is a bug we'll want to know about too. + */ + TRACE_ABORT(-EIO, ft_t_bug, "bug - bad command: %d", command); + } + if (++level > 5) { /* This is a bug we'll want to know about. */ + --level; + TRACE_ABORT(-EIO, ft_t_bug, "bug - recursion for command: %d", + command); + } + /* disable logging and restriction check for some commands, + * check all other commands that have a prescribed starting + * status. + */ + if (diagnostic_mode) { + TRACE(ft_t_flow, "diagnostic command %d", command); + } else if (command == QIC_REPORT_DRIVE_STATUS || + command == QIC_REPORT_NEXT_BIT) { + TRACE(ft_t_any, "%s", qic117_cmds[command].name); + } else { + TRACE_CATCH(ft_check_cmd_restrictions(command), --level); + } + /* Now all conditions are met or result was < 0. + */ + result = ft_send_to_drive((unsigned int)command); + if (qic117_cmds[command].cmd_type == motion && + command != QIC_LOGICAL_FORWARD && command != QIC_STOP_TAPE) { + ft_location.known = 0; + } + ftape_current_command = command; + --level; + TRACE_EXIT result; +} + +/* Send a tape command parameter: + * Generates command # of step pulses. + * Skips tape-status call ! + */ +int ftape_parameter(unsigned int parameter) +{ + TRACE_FUN(ft_t_any); + + TRACE(ft_t_flow, "called with parameter = %d", parameter); + TRACE_EXIT ft_send_to_drive(parameter + 2); +} + +/* Wait for the drive to get ready. + * timeout time in milli-seconds + * Returned status is valid if result != -EIO + * + * Should we allow to be killed by SIGINT? (^C) + * Would be nice at least for large timeouts. + */ +int ftape_ready_wait(unsigned int timeout, int *status) +{ + unsigned long t0; + unsigned int poll_delay; + int signal_retries; + TRACE_FUN(ft_t_any); + + /* the following ** REALLY ** reduces the system load when + * e.g. one simply rewinds or retensions. The tape is slow + * anyway. It is really not necessary to detect error + * conditions with 1/10 seconds granularity + * + * On my AMD 133MHZ 486: 100 ms: 23% system load + * 1 sec: 5% + * 5 sec: 0.6%, yeah + */ + if (timeout <= FT_SECOND) { + poll_delay = 100 * FT_MILLISECOND; + signal_retries = 20; /* two seconds */ + } else if (timeout < 20 * FT_SECOND) { + TRACE(ft_t_flow, "setting poll delay to 1 second"); + poll_delay = FT_SECOND; + signal_retries = 2; /* two seconds */ + } else { + TRACE(ft_t_flow, "setting poll delay to 5 seconds"); + poll_delay = 5 * FT_SECOND; + signal_retries = 1; /* five seconds */ + } + for (;;) { + t0 = jiffies; + TRACE_CATCH(ftape_report_raw_drive_status(status),); + if (*status & QIC_STATUS_READY) { + TRACE_EXIT 0; + } + if (!signal_retries--) { + FT_SIGNAL_EXIT(_NEVER_BLOCK); + } + if ((int)timeout >= 0) { + /* this will fail when jiffies wraps around about + * once every year :-) + */ + timeout -= ((jiffies - t0) * FT_SECOND) / HZ; + if (timeout <= 0) { + TRACE_ABORT(-ETIME, ft_t_err, "timeout"); + } + ftape_sleep(poll_delay); + timeout -= poll_delay; + } else { + ftape_sleep(poll_delay); + } + } + TRACE_EXIT -ETIME; +} + +/* Issue command and wait up to timeout milli seconds for drive ready + */ +int ftape_command_wait(qic117_cmd_t command, unsigned int timeout, int *status) +{ + int result; + + /* Drive should be ready, issue command + */ + result = ftape_command(command); + if (result >= 0) { + result = ftape_ready_wait(timeout, status); + } + return result; +} + +static int ftape_parameter_wait(unsigned int parm, unsigned int timeout, int *status) +{ + int result; + + /* Drive should be ready, issue command + */ + result = ftape_parameter(parm); + if (result >= 0) { + result = ftape_ready_wait(timeout, status); + } + return result; +} + +/*-------------------------------------------------------------------------- + * Report operations + */ + +/* Query the drive about its status. The command is sent and + result_length bits of status are returned (2 extra bits are read + for start and stop). */ + +int ftape_report_operation(int *status, + qic117_cmd_t command, + int result_length) +{ + int i, st3; + unsigned int t0; + unsigned int dt; + TRACE_FUN(ft_t_any); + + TRACE_CATCH(ftape_command(command),); + t0 = ftape_timestamp(); + i = 0; + do { + ++i; + ftape_sleep(3 * FT_MILLISECOND); /* see remark below */ + TRACE_CATCH(fdc_sense_drive_status(&st3),); + dt = ftape_timediff(t0, ftape_timestamp()); + /* Ack should be asserted within Ttimout + Tack = 6 msec. + * Looks like some drives fail to do this so extend this + * period to 300 msec. + */ + } while (!(st3 & ST3_TRACK_0) && dt < 300000); + if (!(st3 & ST3_TRACK_0)) { + TRACE(ft_t_err, + "No acknowledge after %u msec. (%i iter)", dt / 1000, i); + TRACE_ABORT(-EIO, ft_t_err, "timeout on Acknowledge"); + } + /* dt may be larger than expected because of other tasks + * scheduled while we were sleeping. + */ + if (i > 1 && dt > 6000) { + TRACE(ft_t_err, "Acknowledge after %u msec. (%i iter)", + dt / 1000, i); + } + *status = 0; + for (i = 0; i < result_length + 1; i++) { + TRACE_CATCH(ftape_command(QIC_REPORT_NEXT_BIT),); + TRACE_CATCH(fdc_sense_drive_status(&st3),); + if (i < result_length) { + *status |= ((st3 & ST3_TRACK_0) ? 1 : 0) << i; + } else if ((st3 & ST3_TRACK_0) == 0) { + TRACE_ABORT(-EIO, ft_t_err, "missing status stop bit"); + } + } + /* this command will put track zero and index back into normal state */ + (void)ftape_command(QIC_REPORT_NEXT_BIT); + TRACE_EXIT 0; +} + +/* Report the current drive status. */ + +int ftape_report_raw_drive_status(int *status) +{ + int result; + int count = 0; + TRACE_FUN(ft_t_any); + + do { + result = ftape_report_operation(status, + QIC_REPORT_DRIVE_STATUS, 8); + } while (result < 0 && ++count <= 3); + if (result < 0) { + TRACE_ABORT(-EIO, ft_t_err, + "report_operation failed after %d trials", count); + } + if ((*status & 0xff) == 0xff) { + TRACE_ABORT(-EIO, ft_t_err, + "impossible drive status 0xff"); + } + if (*status & QIC_STATUS_READY) { + ftape_current_command = QIC_NO_COMMAND; /* completed */ + } + ft_last_status.status.drive_status = (__u8)(*status & 0xff); + TRACE_EXIT 0; +} + +int ftape_report_drive_status(int *status) +{ + TRACE_FUN(ft_t_any); + + TRACE_CATCH(ftape_report_raw_drive_status(status),); + if (*status & QIC_STATUS_NEW_CARTRIDGE || + !(*status & QIC_STATUS_CARTRIDGE_PRESENT)) { + ft_failure = 1; /* will inhibit further operations */ + TRACE_EXIT -EIO; + } + if (*status & QIC_STATUS_READY && *status & QIC_STATUS_ERROR) { + /* Let caller handle all errors */ + TRACE_ABORT(1, ft_t_warn, "warning: error status set!"); + } + TRACE_EXIT 0; +} + +int ftape_report_error(unsigned int *error, + qic117_cmd_t *command, int report) +{ + static const ftape_error ftape_errors[] = QIC117_ERRORS; + int code; + TRACE_FUN(ft_t_any); + + TRACE_CATCH(ftape_report_operation(&code, QIC_REPORT_ERROR_CODE, 16),); + *error = (unsigned int)(code & 0xff); + *command = (qic117_cmd_t)((code>>8)&0xff); + /* remember hardware status, maybe useful for status ioctls + */ + ft_last_error.error.command = (__u8)*command; + ft_last_error.error.error = (__u8)*error; + if (!report) { + TRACE_EXIT 0; + } + if (*error == 0) { + TRACE_ABORT(0, ft_t_info, "No error"); + } + TRACE(ft_t_info, "errorcode: %d", *error); + if (*error < NR_ITEMS(ftape_errors)) { + TRACE(ft_t_noise, "%sFatal ERROR:", + (ftape_errors[*error].fatal ? "" : "Non-")); + TRACE(ft_t_noise, "%s ...", ftape_errors[*error].message); + } else { + TRACE(ft_t_noise, "Unknown ERROR !"); + } + if ((unsigned int)*command < NR_ITEMS(qic117_cmds) && + qic117_cmds[*command].name != NULL) { + TRACE(ft_t_noise, "... caused by command \'%s\'", + qic117_cmds[*command].name); + } else { + TRACE(ft_t_noise, "... caused by unknown command %d", + *command); + } + TRACE_EXIT 0; +} + +int ftape_report_configuration(qic_model *model, + unsigned int *rate, + int *qic_std, + int *tape_len) +{ + int result; + int config; + int status; + static const unsigned int qic_rates[ 4] = { 250, 2000, 500, 1000 }; + TRACE_FUN(ft_t_any); + + result = ftape_report_operation(&config, + QIC_REPORT_DRIVE_CONFIGURATION, 8); + if (result < 0) { + ft_last_status.status.drive_config = (__u8)0x00; + *model = prehistoric; + *rate = 500; + *qic_std = QIC_TAPE_QIC40; + *tape_len = 205; + TRACE_EXIT 0; + } else { + ft_last_status.status.drive_config = (__u8)(config & 0xff); + } + *rate = qic_rates[(config & QIC_CONFIG_RATE_MASK) >> QIC_CONFIG_RATE_SHIFT]; + result = ftape_report_operation(&status, QIC_REPORT_TAPE_STATUS, 8); + if (result < 0) { + ft_last_status.status.tape_status = (__u8)0x00; + /* pre- QIC117 rev C spec. drive, QIC_CONFIG_80 bit is valid. + */ + *qic_std = (config & QIC_CONFIG_80) ? + QIC_TAPE_QIC80 : QIC_TAPE_QIC40; + /* ?? how's about 425ft tapes? */ + *tape_len = (config & QIC_CONFIG_LONG) ? 307 : 0; + *model = pre_qic117c; + result = 0; + } else { + ft_last_status.status.tape_status = (__u8)(status & 0xff); + *model = post_qic117b; + TRACE(ft_t_any, "report tape status result = %02x", status); + /* post- QIC117 rev C spec. drive, QIC_CONFIG_80 bit is + * invalid. + */ + switch (status & QIC_TAPE_STD_MASK) { + case QIC_TAPE_QIC40: + case QIC_TAPE_QIC80: + case QIC_TAPE_QIC3020: + case QIC_TAPE_QIC3010: + *qic_std = status & QIC_TAPE_STD_MASK; + break; + default: + *qic_std = -1; + break; + } + switch (status & QIC_TAPE_LEN_MASK) { + case QIC_TAPE_205FT: + /* 205 or 425+ ft 550 Oe tape */ + *tape_len = 0; + break; + case QIC_TAPE_307FT: + /* 307.5 ft 550 Oe Extended Length (XL) tape */ + *tape_len = 307; + break; + case QIC_TAPE_VARIABLE: + /* Variable length 550 Oe tape */ + *tape_len = 0; + break; + case QIC_TAPE_1100FT: + /* 1100 ft 550 Oe tape */ + *tape_len = 1100; + break; + case QIC_TAPE_FLEX: + /* Variable length 900 Oe tape */ + *tape_len = 0; + break; + default: + *tape_len = -1; + break; + } + if (*qic_std == -1 || *tape_len == -1) { + TRACE(ft_t_any, + "post qic-117b spec drive with unknown tape"); + } + result = *tape_len == -1 ? -EIO : 0; + if (status & QIC_TAPE_WIDE) { + switch (*qic_std) { + case QIC_TAPE_QIC80: + TRACE(ft_t_info, "TR-1 tape detected"); + break; + case QIC_TAPE_QIC3010: + TRACE(ft_t_info, "TR-2 tape detected"); + break; + case QIC_TAPE_QIC3020: + TRACE(ft_t_info, "TR-3 tape detected"); + break; + default: + TRACE(ft_t_warn, + "Unknown Travan tape type detected"); + break; + } + } + } + TRACE_EXIT (result < 0) ? -EIO : 0; +} + +static int ftape_report_rom_version(int *version) +{ + + if (ftape_report_operation(version, QIC_REPORT_ROM_VERSION, 8) < 0) { + return -EIO; + } else { + return 0; + } +} + +void ftape_report_vendor_id(unsigned int *id) +{ + int result; + TRACE_FUN(ft_t_any); + + /* We'll try to get a vendor id from the drive. First + * according to the QIC-117 spec, a 16-bit id is requested. + * If that fails we'll try an 8-bit version, otherwise we'll + * try an undocumented query. + */ + result = ftape_report_operation((int *) id, QIC_REPORT_VENDOR_ID, 16); + if (result < 0) { + result = ftape_report_operation((int *) id, + QIC_REPORT_VENDOR_ID, 8); + if (result < 0) { + /* The following is an undocumented call found + * in the CMS code. + */ + result = ftape_report_operation((int *) id, 24, 8); + if (result < 0) { + *id = UNKNOWN_VENDOR; + } else { + TRACE(ft_t_noise, "got old 8 bit id: %04x", + *id); + *id |= 0x20000; + } + } else { + TRACE(ft_t_noise, "got 8 bit id: %04x", *id); + *id |= 0x10000; + } + } else { + TRACE(ft_t_noise, "got 16 bit id: %04x", *id); + } + if (*id == 0x0047) { + int version; + int sign; + + if (ftape_report_rom_version(&version) < 0) { + TRACE(ft_t_bug, "report rom version failed"); + TRACE_EXIT; + } + TRACE(ft_t_noise, "CMS rom version: %d", version); + ftape_command(QIC_ENTER_DIAGNOSTIC_1); + ftape_command(QIC_ENTER_DIAGNOSTIC_1); + diagnostic_mode = 1; + if (ftape_report_operation(&sign, 9, 8) < 0) { + unsigned int error; + qic117_cmd_t command; + + ftape_report_error(&error, &command, 1); + ftape_command(QIC_ENTER_PRIMARY_MODE); + diagnostic_mode = 0; + TRACE_EXIT; /* failure ! */ + } else { + TRACE(ft_t_noise, "CMS signature: %02x", sign); + } + if (sign == 0xa5) { + result = ftape_report_operation(&sign, 37, 8); + if (result < 0) { + if (version >= 63) { + *id = 0x8880; + TRACE(ft_t_noise, + "This is an Iomega drive !"); + } else { + *id = 0x0047; + TRACE(ft_t_noise, + "This is a real CMS drive !"); + } + } else { + *id = 0x0047; + TRACE(ft_t_noise, "CMS status: %d", sign); + } + } else { + *id = UNKNOWN_VENDOR; + } + ftape_command(QIC_ENTER_PRIMARY_MODE); + diagnostic_mode = 0; + } + TRACE_EXIT; +} + +static int qic_rate_code(unsigned int rate) +{ + switch (rate) { + case 250: + return QIC_CONFIG_RATE_250; + case 500: + return QIC_CONFIG_RATE_500; + case 1000: + return QIC_CONFIG_RATE_1000; + case 2000: + return QIC_CONFIG_RATE_2000; + default: + return QIC_CONFIG_RATE_500; + } +} + +static int ftape_set_rate_test(unsigned int *max_rate) +{ + unsigned int error; + qic117_cmd_t command; + int status; + int supported = 0; + TRACE_FUN(ft_t_any); + + /* Check if the drive does support the select rate command + * by testing all different settings. If any one is accepted + * we assume the command is supported, else not. + */ + for (*max_rate = 2000; *max_rate >= 250; *max_rate /= 2) { + if (ftape_command(QIC_SELECT_RATE) < 0) { + continue; + } + if (ftape_parameter_wait(qic_rate_code(*max_rate), + 1 * FT_SECOND, &status) < 0) { + continue; + } + if (status & QIC_STATUS_ERROR) { + ftape_report_error(&error, &command, 0); + continue; + } + supported = 1; /* did accept a request */ + break; + } + TRACE(ft_t_noise, "Select Rate command is%s supported", + supported ? "" : " not"); + TRACE_EXIT supported; +} + +int ftape_set_data_rate(unsigned int new_rate /* Kbps */, unsigned int qic_std) +{ + int status; + int result = 0; + unsigned int data_rate = new_rate; + static int supported; + int rate_changed = 0; + qic_model dummy_model; + unsigned int dummy_qic_std, dummy_tape_len; + TRACE_FUN(ft_t_any); + + if (ft_drive_max_rate == 0) { /* first time */ + supported = ftape_set_rate_test(&ft_drive_max_rate); + } + if (supported) { + ftape_command(QIC_SELECT_RATE); + result = ftape_parameter_wait(qic_rate_code(new_rate), + 1 * FT_SECOND, &status); + if (result >= 0 && !(status & QIC_STATUS_ERROR)) { + rate_changed = 1; + } + } + TRACE_CATCH(result = ftape_report_configuration(&dummy_model, + &data_rate, + &dummy_qic_std, + &dummy_tape_len),); + if (data_rate != new_rate) { + if (!supported) { + TRACE(ft_t_warn, "Rate change not supported!"); + } else if (rate_changed) { + TRACE(ft_t_warn, "Requested: %d, got %d", + new_rate, data_rate); + } else { + TRACE(ft_t_warn, "Rate change failed!"); + } + result = -EINVAL; + } + /* + * Set data rate and write precompensation as specified: + * + * | QIC-40/80 | QIC-3010/3020 + * rate | precomp | precomp + * ----------+-------------+-------------- + * 250 Kbps. | 250 ns. | 0 ns. + * 500 Kbps. | 125 ns. | 0 ns. + * 1 Mbps. | 42 ns. | 0 ns. + * 2 Mbps | N/A | 0 ns. + */ + if ((qic_std == QIC_TAPE_QIC40 && data_rate > 500) || + (qic_std == QIC_TAPE_QIC80 && data_rate > 1000)) { + TRACE_ABORT(-EINVAL, + ft_t_warn, "Datarate too high for QIC-mode"); + } + TRACE_CATCH(fdc_set_data_rate(data_rate),_res = -EINVAL); + ft_data_rate = data_rate; + if (qic_std == QIC_TAPE_QIC40 || qic_std == QIC_TAPE_QIC80) { + switch (data_rate) { + case 250: + fdc_set_write_precomp(250); + break; + default: + case 500: + fdc_set_write_precomp(125); + break; + case 1000: + fdc_set_write_precomp(42); + break; + } + } else { + fdc_set_write_precomp(0); + } + TRACE_EXIT result; +} + +/* The next two functions are used to cope with excessive overrun errors + */ +int ftape_increase_threshold(void) +{ + TRACE_FUN(ft_t_flow); + + if (fdc.type < i82077 || ft_fdc_threshold >= 12) { + TRACE_ABORT(-EIO, ft_t_err, "cannot increase fifo threshold"); + } + if (fdc_fifo_threshold(++ft_fdc_threshold, NULL, NULL, NULL) < 0) { + TRACE(ft_t_err, "cannot increase fifo threshold"); + ft_fdc_threshold --; + fdc_reset(); + } + TRACE(ft_t_info, "New FIFO threshold: %d", ft_fdc_threshold); + TRACE_EXIT 0; +} + +int ftape_half_data_rate(void) +{ + if (ft_data_rate < 500) { + return -1; + } + if (ftape_set_data_rate(ft_data_rate / 2, ft_qic_std) < 0) { + return -EIO; + } + ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len); + return 0; +} + +/* Seek the head to the specified track. + */ +int ftape_seek_head_to_track(unsigned int track) +{ + int status; + TRACE_FUN(ft_t_any); + + ft_location.track = -1; /* remains set in case of error */ + if (track >= ft_tracks_per_tape) { + TRACE_ABORT(-EINVAL, ft_t_bug, "track out of bounds"); + } + TRACE(ft_t_flow, "seeking track %d", track); + TRACE_CATCH(ftape_command(QIC_SEEK_HEAD_TO_TRACK),); + TRACE_CATCH(ftape_parameter_wait(track, ftape_timeout.head_seek, + &status),); + ft_location.track = track; + ftape_might_be_off_track = 0; + TRACE_EXIT 0; +} + +int ftape_wakeup_drive(wake_up_types method) +{ + int status; + int motor_on = 0; + TRACE_FUN(ft_t_any); + + switch (method) { + case wake_up_colorado: + TRACE_CATCH(ftape_command(QIC_PHANTOM_SELECT),); + TRACE_CATCH(ftape_parameter(0 /* ft_drive_sel ?? */),); + break; + case wake_up_mountain: + TRACE_CATCH(ftape_command(QIC_SOFT_SELECT),); + ftape_sleep(FT_MILLISECOND); /* NEEDED */ + TRACE_CATCH(ftape_parameter(18),); + break; + case wake_up_insight: + ftape_sleep(100 * FT_MILLISECOND); + motor_on = 1; + fdc_motor(motor_on); /* enable is done by motor-on */ + case no_wake_up: + break; + default: + TRACE_EXIT -ENODEV; /* unknown wakeup method */ + break; + } + /* If wakeup succeeded we shouldn't get an error here.. + */ + TRACE_CATCH(ftape_report_raw_drive_status(&status), + if (motor_on) { + fdc_motor(0); + }); + TRACE_EXIT 0; +} + +int ftape_put_drive_to_sleep(wake_up_types method) +{ + TRACE_FUN(ft_t_any); + + switch (method) { + case wake_up_colorado: + TRACE_CATCH(ftape_command(QIC_PHANTOM_DESELECT),); + break; + case wake_up_mountain: + TRACE_CATCH(ftape_command(QIC_SOFT_DESELECT),); + break; + case wake_up_insight: + fdc_motor(0); /* enable is done by motor-on */ + case no_wake_up: /* no wakeup / no sleep ! */ + break; + default: + TRACE_EXIT -ENODEV; /* unknown wakeup method */ + } + TRACE_EXIT 0; +} + +int ftape_reset_drive(void) +{ + int result = 0; + int status; + unsigned int err_code; + qic117_cmd_t err_command; + int i; + TRACE_FUN(ft_t_any); + + /* We want to re-establish contact with our drive. Fire a + * number of reset commands (single step pulses) and pray for + * success. + */ + for (i = 0; i < 2; ++i) { + TRACE(ft_t_flow, "Resetting fdc"); + fdc_reset(); + ftape_sleep(10 * FT_MILLISECOND); + TRACE(ft_t_flow, "Reset command to drive"); + result = ftape_command(QIC_RESET); + if (result == 0) { + ftape_sleep(1 * FT_SECOND); /* drive not + * accessible + * during 1 second + */ + TRACE(ft_t_flow, "Re-selecting drive"); + + /* Strange, the QIC-117 specs don't mention + * this but the drive gets deselected after a + * soft reset ! So we need to enable it + * again. + */ + if (ftape_wakeup_drive(ft_drive_type.wake_up) < 0) { + TRACE(ft_t_err, "Wakeup failed !"); + } + TRACE(ft_t_flow, "Waiting until drive gets ready"); + result= ftape_ready_wait(ftape_timeout.reset, &status); + if (result == 0 && (status & QIC_STATUS_ERROR)) { + result = ftape_report_error(&err_code, + &err_command, 1); + if (result == 0 && err_code == 27) { + /* Okay, drive saw reset + * command and responded as it + * should + */ + break; + } else { + result = -EIO; + } + } else { + result = -EIO; + } + } + FT_SIGNAL_EXIT(_DONT_BLOCK); + } + if (result != 0) { + TRACE(ft_t_err, "General failure to reset tape drive"); + } else { + /* Restore correct settings: keep original rate + */ + ftape_set_data_rate(ft_data_rate, ft_qic_std); + } + ftape_init_drive_needed = 1; + TRACE_EXIT result; +} diff --git a/drivers/char/ftape/lowlevel/ftape-io.h b/drivers/char/ftape/lowlevel/ftape-io.h new file mode 100644 index 000000000000..26a7baad8717 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-io.h @@ -0,0 +1,90 @@ +#ifndef _FTAPE_IO_H +#define _FTAPE_IO_H + +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-io.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:18 $ + * + * This file contains definitions for the glue part of the + * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. + */ + +#include <linux/qic117.h> +#include <linux/ftape-vendors.h> + +typedef struct { + unsigned int seek; + unsigned int reset; + unsigned int rewind; + unsigned int head_seek; + unsigned int stop; + unsigned int pause; +} ft_timeout_table; + +typedef enum { + prehistoric, pre_qic117c, post_qic117b, post_qic117d +} qic_model; + +/* + * ftape-io.c defined global vars. + */ +extern ft_timeout_table ftape_timeout; +extern unsigned int ftape_tape_len; +extern volatile qic117_cmd_t ftape_current_command; +extern const struct qic117_command_table qic117_cmds[]; +extern int ftape_might_be_off_track; + +/* + * ftape-io.c defined global functions. + */ +extern void ftape_udelay(unsigned int usecs); +extern void ftape_udelay_calibrate(void); +extern void ftape_sleep(unsigned int time); +extern void ftape_report_vendor_id(unsigned int *id); +extern int ftape_command(qic117_cmd_t command); +extern int ftape_command_wait(qic117_cmd_t command, + unsigned int timeout, + int *status); +extern int ftape_parameter(unsigned int parameter); +extern int ftape_report_operation(int *status, + qic117_cmd_t command, + int result_length); +extern int ftape_report_configuration(qic_model *model, + unsigned int *rate, + int *qic_std, + int *tape_len); +extern int ftape_report_drive_status(int *status); +extern int ftape_report_raw_drive_status(int *status); +extern int ftape_report_status(int *status); +extern int ftape_ready_wait(unsigned int timeout, int *status); +extern int ftape_seek_head_to_track(unsigned int track); +extern int ftape_set_data_rate(unsigned int new_rate, unsigned int qic_std); +extern int ftape_report_error(unsigned int *error, + qic117_cmd_t *command, + int report); +extern int ftape_reset_drive(void); +extern int ftape_put_drive_to_sleep(wake_up_types method); +extern int ftape_wakeup_drive(wake_up_types method); +extern int ftape_increase_threshold(void); +extern int ftape_half_data_rate(void); + +#endif diff --git a/drivers/char/ftape/lowlevel/ftape-proc.c b/drivers/char/ftape/lowlevel/ftape-proc.c new file mode 100644 index 000000000000..c66251e997ed --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-proc.c @@ -0,0 +1,215 @@ +/* + * Copyright (C) 1997 Claus-Justus Heine + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-proc.c,v $ + * $Revision: 1.11 $ + * $Date: 1997/10/24 14:47:37 $ + * + * This file contains the procfs interface for the + * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. + + * Old code removed, switched to dynamic proc entry. + */ + +#include <linux/config.h> + +#if defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) + +#include <linux/proc_fs.h> + +#include <linux/ftape.h> +#include <linux/init.h> +#include <linux/qic117.h> + +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-proc.h" +#include "../lowlevel/ftape-tracing.h" + +static size_t get_driver_info(char *buf) +{ + const char *debug_level[] = { "bugs" , + "errors", + "warnings", + "informational", + "noisy", + "program flow", + "fdc and dma", + "data flow", + "anything" }; + + return sprintf(buf, + "version : %s\n" + "used data rate: %d kbit/sec\n" + "dma memory : %d kb\n" + "debug messages: %s\n", + FTAPE_VERSION, + ft_data_rate, + FT_BUFF_SIZE * ft_nr_buffers >> 10, + debug_level[TRACE_LEVEL]); +} + +static size_t get_tapedrive_info(char *buf) +{ + return sprintf(buf, + "vendor id : 0x%04x\n" + "drive name: %s\n" + "wind speed: %d ips\n" + "wakeup : %s\n" + "max. rate : %d kbit/sec\n", + ft_drive_type.vendor_id, + ft_drive_type.name, + ft_drive_type.speed, + ((ft_drive_type.wake_up == no_wake_up) + ? "No wakeup needed" : + ((ft_drive_type.wake_up == wake_up_colorado) + ? "Colorado" : + ((ft_drive_type.wake_up == wake_up_mountain) + ? "Mountain" : + ((ft_drive_type.wake_up == wake_up_insight) + ? "Motor on" : + "Unknown")))), + ft_drive_max_rate); +} + +static size_t get_cartridge_info(char *buf) +{ + if (ftape_init_drive_needed) { + return sprintf(buf, "uninitialized\n"); + } + if (ft_no_tape) { + return sprintf(buf, "no cartridge inserted\n"); + } + return sprintf(buf, + "segments : %5d\n" + "tracks : %5d\n" + "length : %5dft\n" + "formatted : %3s\n" + "writable : %3s\n" + "QIC spec. : QIC-%s\n" + "fmt-code : %1d\n", + ft_segments_per_track, + ft_tracks_per_tape, + ftape_tape_len, + (ft_formatted == 1) ? "yes" : "no", + (ft_write_protected == 1) ? "no" : "yes", + ((ft_qic_std == QIC_TAPE_QIC40) ? "40" : + ((ft_qic_std == QIC_TAPE_QIC80) ? "80" : + ((ft_qic_std == QIC_TAPE_QIC3010) ? "3010" : + ((ft_qic_std == QIC_TAPE_QIC3020) ? "3020" : + "???")))), + ft_format_code); +} + +static size_t get_controller_info(char *buf) +{ + const char *fdc_name[] = { "no fdc", + "i8272", + "i82077", + "i82077AA", + "Colorado FC-10 or FC-20", + "i82078", + "i82078_1" }; + + return sprintf(buf, + "FDC type : %s\n" + "FDC base : 0x%03x\n" + "FDC irq : %d\n" + "FDC dma : %d\n" + "FDC thr. : %d\n" + "max. rate : %d kbit/sec\n", + ft_mach2 ? "Mountain MACH-2" : fdc_name[fdc.type], + fdc.sra, fdc.irq, fdc.dma, + ft_fdc_threshold, ft_fdc_max_rate); +} + +static size_t get_history_info(char *buf) +{ + size_t len; + + len = sprintf(buf, + "\nFDC isr statistics\n" + " id_am_errors : %3d\n" + " id_crc_errors : %3d\n" + " data_am_errors : %3d\n" + " data_crc_errors : %3d\n" + " overrun_errors : %3d\n" + " no_data_errors : %3d\n" + " retries : %3d\n", + ft_history.id_am_errors, ft_history.id_crc_errors, + ft_history.data_am_errors, ft_history.data_crc_errors, + ft_history.overrun_errors, ft_history.no_data_errors, + ft_history.retries); + len += sprintf(buf + len, + "\nECC statistics\n" + " crc_errors : %3d\n" + " crc_failures : %3d\n" + " ecc_failures : %3d\n" + " sectors corrected: %3d\n", + ft_history.crc_errors, ft_history.crc_failures, + ft_history.ecc_failures, ft_history.corrected); + len += sprintf(buf + len, + "\ntape quality statistics\n" + " media defects : %3d\n", + ft_history.defects); + len += sprintf(buf + len, + "\ntape motion statistics\n" + " repositions : %3d\n", + ft_history.rewinds); + return len; +} + +static int ftape_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + char *ptr = page; + size_t len; + + ptr += sprintf(ptr, "Kernel Driver\n\n"); + ptr += get_driver_info(ptr); + ptr += sprintf(ptr, "\nTape Drive\n\n"); + ptr += get_tapedrive_info(ptr); + ptr += sprintf(ptr, "\nFDC Controller\n\n"); + ptr += get_controller_info(ptr); + ptr += sprintf(ptr, "\nTape Cartridge\n\n"); + ptr += get_cartridge_info(ptr); + ptr += sprintf(ptr, "\nHistory Record\n\n"); + ptr += get_history_info(ptr); + + len = strlen(page); + *start = NULL; + if (off+count >= len) { + *eof = 1; + } else { + *eof = 0; + } + return len; +} + +int __init ftape_proc_init(void) +{ + return create_proc_read_entry("ftape", 0, &proc_root, + ftape_read_proc, NULL) != NULL; +} + +void ftape_proc_destroy(void) +{ + remove_proc_entry("ftape", &proc_root); +} + +#endif /* defined(CONFIG_PROC_FS) && defined(CONFIG_FT_PROC_FS) */ diff --git a/drivers/char/ftape/lowlevel/ftape-proc.h b/drivers/char/ftape/lowlevel/ftape-proc.h new file mode 100644 index 000000000000..264dfcc1d22d --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-proc.h @@ -0,0 +1,35 @@ +#ifndef _FTAPE_PROC_H +#define _FTAPE_PROC_H + +/* + * Copyright (C) 1997 Claus-Justus Heine + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-proc.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:20 $ + * + * This file contains definitions for the procfs interface of the + * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. + */ + +#include <linux/proc_fs.h> + +extern int ftape_proc_init(void); +extern void ftape_proc_destroy(void); + +#endif diff --git a/drivers/char/ftape/lowlevel/ftape-read.c b/drivers/char/ftape/lowlevel/ftape-read.c new file mode 100644 index 000000000000..d967d8cd86dc --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-read.c @@ -0,0 +1,621 @@ +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-read.c,v $ + * $Revision: 1.6 $ + * $Date: 1997/10/21 14:39:22 $ + * + * This file contains the reading code + * for the QIC-117 floppy-tape driver for Linux. + * + */ + +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/mm.h> + +#include <linux/ftape.h> +#include <linux/qic117.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-read.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-write.h" +#include "../lowlevel/ftape-ecc.h" +#include "../lowlevel/ftape-bsm.h" + +/* Global vars. + */ + +/* Local vars. + */ + +void ftape_zap_read_buffers(void) +{ + int i; + + for (i = 0; i < ft_nr_buffers; ++i) { +/* changed to "fit" with dynamic allocation of tape_buffer. --khp */ + ft_buffer[i]->status = waiting; + ft_buffer[i]->bytes = 0; + ft_buffer[i]->skip = 0; + ft_buffer[i]->retry = 0; + } +/* ftape_reset_buffer(); */ +} + +static SectorMap convert_sector_map(buffer_struct * buff) +{ + int i = 0; + SectorMap bad_map = ftape_get_bad_sector_entry(buff->segment_id); + SectorMap src_map = buff->soft_error_map | buff->hard_error_map; + SectorMap dst_map = 0; + TRACE_FUN(ft_t_any); + + if (bad_map || src_map) { + TRACE(ft_t_flow, "bad_map = 0x%08lx", (long) bad_map); + TRACE(ft_t_flow, "src_map = 0x%08lx", (long) src_map); + } + while (bad_map) { + while ((bad_map & 1) == 0) { + if (src_map & 1) { + dst_map |= (1 << i); + } + src_map >>= 1; + bad_map >>= 1; + ++i; + } + /* (bad_map & 1) == 1 */ + src_map >>= 1; + bad_map >>= 1; + } + if (src_map) { + dst_map |= (src_map << i); + } + if (dst_map) { + TRACE(ft_t_flow, "dst_map = 0x%08lx", (long) dst_map); + } + TRACE_EXIT dst_map; +} + +static int correct_and_copy_fraction(buffer_struct *buff, __u8 * destination, + int start, int size) +{ + struct memory_segment mseg; + int result; + SectorMap read_bad; + TRACE_FUN(ft_t_any); + + mseg.read_bad = convert_sector_map(buff); + mseg.marked_bad = 0; /* not used... */ + mseg.blocks = buff->bytes / FT_SECTOR_SIZE; + mseg.data = buff->address; + /* If there are no data sectors we can skip this segment. + */ + if (mseg.blocks <= 3) { + TRACE_ABORT(0, ft_t_noise, "empty segment"); + } + read_bad = mseg.read_bad; + ft_history.crc_errors += count_ones(read_bad); + result = ftape_ecc_correct_data(&mseg); + if (read_bad != 0 || mseg.corrected != 0) { + TRACE(ft_t_noise, "crc error map: 0x%08lx", (unsigned long)read_bad); + TRACE(ft_t_noise, "corrected map: 0x%08lx", (unsigned long)mseg.corrected); + ft_history.corrected += count_ones(mseg.corrected); + } + if (result == ECC_CORRECTED || result == ECC_OK) { + if (result == ECC_CORRECTED) { + TRACE(ft_t_info, "ecc corrected segment: %d", buff->segment_id); + } + if(start < 0) { + start= 0; + } + if((start+size) > ((mseg.blocks - 3) * FT_SECTOR_SIZE)) { + size = (mseg.blocks - 3) * FT_SECTOR_SIZE - start; + } + if (size < 0) { + size= 0; + } + if(size > 0) { + memcpy(destination + start, mseg.data + start, size); + } + if ((read_bad ^ mseg.corrected) & mseg.corrected) { + /* sectors corrected without crc errors set */ + ft_history.crc_failures++; + } + TRACE_EXIT size; /* (mseg.blocks - 3) * FT_SECTOR_SIZE; */ + } else { + ft_history.ecc_failures++; + TRACE_ABORT(-EAGAIN, + ft_t_err, "ecc failure on segment %d", + buff->segment_id); + } + TRACE_EXIT 0; +} + +/* Read given segment into buffer at address. + */ +int ftape_read_segment_fraction(const int segment_id, + void *address, + const ft_read_mode_t read_mode, + const int start, + const int size) +{ + int result = 0; + int retry = 0; + int bytes_read = 0; + int read_done = 0; + TRACE_FUN(ft_t_flow); + + ft_history.used |= 1; + TRACE(ft_t_data_flow, "segment_id = %d", segment_id); + if (ft_driver_state != reading) { + TRACE(ft_t_noise, "calling ftape_abort_operation"); + TRACE_CATCH(ftape_abort_operation(),); + ftape_set_state(reading); + } + for(;;) { + buffer_struct *tail; + /* Allow escape from this loop on signal ! + */ + FT_SIGNAL_EXIT(_DONT_BLOCK); + /* Search all full buffers for the first matching the + * wanted segment. Clear other buffers on the fly. + */ + tail = ftape_get_buffer(ft_queue_tail); + while (!read_done && tail->status == done) { + /* Allow escape from this loop on signal ! + */ + FT_SIGNAL_EXIT(_DONT_BLOCK); + if (tail->segment_id == segment_id) { + /* If out buffer is already full, + * return its contents. + */ + TRACE(ft_t_flow, "found segment in cache: %d", + segment_id); + if (tail->deleted) { + /* Return a value that + * read_header_segment + * understands. As this + * should only occur when + * searching for the header + * segments it shouldn't be + * misinterpreted elsewhere. + */ + TRACE_EXIT 0; + } + result = correct_and_copy_fraction( + tail, + address, + start, + size); + TRACE(ft_t_flow, "segment contains (bytes): %d", + result); + if (result < 0) { + if (result != -EAGAIN) { + TRACE_EXIT result; + } + /* keep read_done == 0, will + * trigger + * ftape_abort_operation + * because reading wrong + * segment. + */ + TRACE(ft_t_err, "ecc failed, retry"); + ++retry; + } else { + read_done = 1; + bytes_read = result; + } + } else { + TRACE(ft_t_flow,"zapping segment in cache: %d", + tail->segment_id); + } + tail->status = waiting; + tail = ftape_next_buffer(ft_queue_tail); + } + if (!read_done && tail->status == reading) { + if (tail->segment_id == segment_id) { + switch(ftape_wait_segment(reading)) { + case 0: + break; + case -EINTR: + TRACE_ABORT(-EINTR, ft_t_warn, + "interrupted by " + "non-blockable signal"); + break; + default: + TRACE(ft_t_noise, + "wait_segment failed"); + ftape_abort_operation(); + ftape_set_state(reading); + break; + } + } else { + /* We're reading the wrong segment, + * stop runner. + */ + TRACE(ft_t_noise, "reading wrong segment"); + ftape_abort_operation(); + ftape_set_state(reading); + } + } + /* should runner stop ? + */ + if (ft_runner_status == aborting) { + buffer_struct *head = ftape_get_buffer(ft_queue_head); + switch(head->status) { + case error: + ft_history.defects += + count_ones(head->hard_error_map); + case reading: + head->status = waiting; + break; + default: + break; + } + TRACE_CATCH(ftape_dumb_stop(),); + } else { + /* If just passed last segment on tape: wait + * for BOT or EOT mark. Sets ft_runner_status to + * idle if at lEOT and successful + */ + TRACE_CATCH(ftape_handle_logical_eot(),); + } + /* If we got a segment: quit, or else retry up to limit. + * + * If segment to read is empty, do not start runner for it, + * but wait for next read call. + */ + if (read_done || + ftape_get_bad_sector_entry(segment_id) == EMPTY_SEGMENT ) { + /* bytes_read = 0; should still be zero */ + TRACE_EXIT bytes_read; + + } + if (retry > FT_RETRIES_ON_ECC_ERROR) { + ft_history.defects++; + TRACE_ABORT(-ENODATA, ft_t_err, + "too many retries on ecc failure"); + } + /* Now at least one buffer is empty ! + * Restart runner & tape if needed. + */ + TRACE(ft_t_any, "head: %d, tail: %d, ft_runner_status: %d", + ftape_buffer_id(ft_queue_head), + ftape_buffer_id(ft_queue_tail), + ft_runner_status); + TRACE(ft_t_any, "buffer[].status, [head]: %d, [tail]: %d", + ftape_get_buffer(ft_queue_head)->status, + ftape_get_buffer(ft_queue_tail)->status); + tail = ftape_get_buffer(ft_queue_tail); + if (tail->status == waiting) { + buffer_struct *head = ftape_get_buffer(ft_queue_head); + + ftape_setup_new_segment(head, segment_id, -1); + if (read_mode == FT_RD_SINGLE) { + /* disable read-ahead */ + head->next_segment = 0; + } + ftape_calc_next_cluster(head); + if (ft_runner_status == idle) { + result = ftape_start_tape(segment_id, + head->sector_offset); + if (result < 0) { + TRACE_ABORT(result, ft_t_err, "Error: " + "segment %d unreachable", + segment_id); + } + } + head->status = reading; + fdc_setup_read_write(head, FDC_READ); + } + } + /* not reached */ + TRACE_EXIT -EIO; +} + +int ftape_read_header_segment(__u8 *address) +{ + int result; + int header_segment; + int first_failed = 0; + int status; + TRACE_FUN(ft_t_flow); + + ft_used_header_segment = -1; + TRACE_CATCH(ftape_report_drive_status(&status),); + TRACE(ft_t_flow, "reading..."); + /* We're looking for the first header segment. + * A header segment cannot contain bad sectors, therefor at the + * tape start, segments with bad sectors are (according to QIC-40/80) + * written with deleted data marks and must be skipped. + */ + memset(address, '\0', (FT_SECTORS_PER_SEGMENT - 3) * FT_SECTOR_SIZE); + result = 0; +#define HEADER_SEGMENT_BOUNDARY 68 /* why not 42? */ + for (header_segment = 0; + header_segment < HEADER_SEGMENT_BOUNDARY && result == 0; + ++header_segment) { + /* Set no read-ahead, the isr will force read-ahead whenever + * it encounters deleted data ! + */ + result = ftape_read_segment(header_segment, + address, + FT_RD_SINGLE); + if (result < 0 && !first_failed) { + TRACE(ft_t_err, "header segment damaged, trying backup"); + first_failed = 1; + result = 0; /* force read of next (backup) segment */ + } + } + if (result < 0 || header_segment >= HEADER_SEGMENT_BOUNDARY) { + TRACE_ABORT(-EIO, ft_t_err, + "no readable header segment found"); + } + TRACE_CATCH(ftape_abort_operation(),); + ft_used_header_segment = header_segment; + result = ftape_decode_header_segment(address); + TRACE_EXIT result; +} + +int ftape_decode_header_segment(__u8 *address) +{ + unsigned int max_floppy_side; + unsigned int max_floppy_track; + unsigned int max_floppy_sector; + unsigned int new_tape_len; + TRACE_FUN(ft_t_flow); + + if (GET4(address, FT_SIGNATURE) == FT_D2G_MAGIC) { + /* Ditto 2GB header segment. They encrypt the bad sector map. + * We decrypt it and store them in normal format. + * I hope this is correct. + */ + int i; + TRACE(ft_t_warn, + "Found Ditto 2GB tape, " + "trying to decrypt bad sector map"); + for (i=256; i < 29 * FT_SECTOR_SIZE; i++) { + address[i] = ~(address[i] - (i&0xff)); + } + PUT4(address, 0,FT_HSEG_MAGIC); + } else if (GET4(address, FT_SIGNATURE) != FT_HSEG_MAGIC) { + TRACE_ABORT(-EIO, ft_t_err, + "wrong signature in header segment"); + } + ft_format_code = (ft_format_type) address[FT_FMT_CODE]; + if (ft_format_code != fmt_big) { + ft_header_segment_1 = GET2(address, FT_HSEG_1); + ft_header_segment_2 = GET2(address, FT_HSEG_2); + ft_first_data_segment = GET2(address, FT_FRST_SEG); + ft_last_data_segment = GET2(address, FT_LAST_SEG); + } else { + ft_header_segment_1 = GET4(address, FT_6_HSEG_1); + ft_header_segment_2 = GET4(address, FT_6_HSEG_2); + ft_first_data_segment = GET4(address, FT_6_FRST_SEG); + ft_last_data_segment = GET4(address, FT_6_LAST_SEG); + } + TRACE(ft_t_noise, "first data segment: %d", ft_first_data_segment); + TRACE(ft_t_noise, "last data segment: %d", ft_last_data_segment); + TRACE(ft_t_noise, "header segments are %d and %d", + ft_header_segment_1, ft_header_segment_2); + + /* Verify tape parameters... + * QIC-40/80 spec: tape_parameters: + * + * segments-per-track segments_per_track + * tracks-per-cartridge tracks_per_tape + * max-floppy-side (segments_per_track * + * tracks_per_tape - 1) / + * ftape_segments_per_head + * max-floppy-track ftape_segments_per_head / + * ftape_segments_per_cylinder - 1 + * max-floppy-sector ftape_segments_per_cylinder * + * FT_SECTORS_PER_SEGMENT + */ + ft_segments_per_track = GET2(address, FT_SPT); + ft_tracks_per_tape = address[FT_TPC]; + max_floppy_side = address[FT_FHM]; + max_floppy_track = address[FT_FTM]; + max_floppy_sector = address[FT_FSM]; + TRACE(ft_t_noise, "(fmt/spt/tpc/fhm/ftm/fsm) = %d/%d/%d/%d/%d/%d", + ft_format_code, ft_segments_per_track, ft_tracks_per_tape, + max_floppy_side, max_floppy_track, max_floppy_sector); + new_tape_len = ftape_tape_len; + switch (ft_format_code) { + case fmt_425ft: + new_tape_len = 425; + break; + case fmt_normal: + if (ftape_tape_len == 0) { /* otherwise 307 ft */ + new_tape_len = 205; + } + break; + case fmt_1100ft: + new_tape_len = 1100; + break; + case fmt_var:{ + int segments_per_1000_inch = 1; /* non-zero default for switch */ + switch (ft_qic_std) { + case QIC_TAPE_QIC40: + segments_per_1000_inch = 332; + break; + case QIC_TAPE_QIC80: + segments_per_1000_inch = 488; + break; + case QIC_TAPE_QIC3010: + segments_per_1000_inch = 730; + break; + case QIC_TAPE_QIC3020: + segments_per_1000_inch = 1430; + break; + } + new_tape_len = (1000 * ft_segments_per_track + + (segments_per_1000_inch - 1)) / segments_per_1000_inch; + break; + } + case fmt_big:{ + int segments_per_1000_inch = 1; /* non-zero default for switch */ + switch (ft_qic_std) { + case QIC_TAPE_QIC40: + segments_per_1000_inch = 332; + break; + case QIC_TAPE_QIC80: + segments_per_1000_inch = 488; + break; + case QIC_TAPE_QIC3010: + segments_per_1000_inch = 730; + break; + case QIC_TAPE_QIC3020: + segments_per_1000_inch = 1430; + break; + default: + TRACE_ABORT(-EIO, ft_t_bug, + "%x QIC-standard with fmt-code %d, please report", + ft_qic_std, ft_format_code); + } + new_tape_len = ((1000 * ft_segments_per_track + + (segments_per_1000_inch - 1)) / + segments_per_1000_inch); + break; + } + default: + TRACE_ABORT(-EIO, ft_t_err, + "unknown tape format, please report !"); + } + if (new_tape_len != ftape_tape_len) { + ftape_tape_len = new_tape_len; + TRACE(ft_t_info, "calculated tape length is %d ft", + ftape_tape_len); + ftape_calc_timeouts(ft_qic_std, ft_data_rate, ftape_tape_len); + } + if (ft_segments_per_track == 0 && ft_tracks_per_tape == 0 && + max_floppy_side == 0 && max_floppy_track == 0 && + max_floppy_sector == 0) { + /* QIC-40 Rev E and earlier has no values in the header. + */ + ft_segments_per_track = 68; + ft_tracks_per_tape = 20; + max_floppy_side = 1; + max_floppy_track = 169; + max_floppy_sector = 128; + } + /* This test will compensate for the wrong parameter on tapes + * formatted by Conner software. + */ + if (ft_segments_per_track == 150 && + ft_tracks_per_tape == 28 && + max_floppy_side == 7 && + max_floppy_track == 149 && + max_floppy_sector == 128) { +TRACE(ft_t_info, "the famous CONNER bug: max_floppy_side off by one !"); + max_floppy_side = 6; + } + /* These tests will compensate for the wrong parameter on tapes + * formatted by ComByte Windows software. + * + * First, for 205 foot tapes + */ + if (ft_segments_per_track == 100 && + ft_tracks_per_tape == 28 && + max_floppy_side == 9 && + max_floppy_track == 149 && + max_floppy_sector == 128) { +TRACE(ft_t_info, "the ComByte bug: max_floppy_side incorrect!"); + max_floppy_side = 4; + } + /* Next, for 307 foot tapes. */ + if (ft_segments_per_track == 150 && + ft_tracks_per_tape == 28 && + max_floppy_side == 9 && + max_floppy_track == 149 && + max_floppy_sector == 128) { +TRACE(ft_t_info, "the ComByte bug: max_floppy_side incorrect!"); + max_floppy_side = 6; + } + /* This test will compensate for the wrong parameter on tapes + * formatted by Colorado Windows software. + */ + if (ft_segments_per_track == 150 && + ft_tracks_per_tape == 28 && + max_floppy_side == 6 && + max_floppy_track == 150 && + max_floppy_sector == 128) { +TRACE(ft_t_info, "the famous Colorado bug: max_floppy_track off by one !"); + max_floppy_track = 149; + } + ftape_segments_per_head = ((max_floppy_sector/FT_SECTORS_PER_SEGMENT) * + (max_floppy_track + 1)); + /* This test will compensate for some bug reported by Dima + * Brodsky. Seems to be a Colorado bug, either. (freebee + * Imation tape shipped together with Colorado T3000 + */ + if ((ft_format_code == fmt_var || ft_format_code == fmt_big) && + ft_tracks_per_tape == 50 && + max_floppy_side == 54 && + max_floppy_track == 255 && + max_floppy_sector == 128) { +TRACE(ft_t_info, "the famous ??? bug: max_floppy_track off by one !"); + max_floppy_track = 254; + } + /* + * Verify drive_configuration with tape parameters + */ + if (ftape_segments_per_head == 0 || ftape_segments_per_cylinder == 0 || + ((ft_segments_per_track * ft_tracks_per_tape - 1) / ftape_segments_per_head + != max_floppy_side) || + (ftape_segments_per_head / ftape_segments_per_cylinder - 1 != max_floppy_track) || + (ftape_segments_per_cylinder * FT_SECTORS_PER_SEGMENT != max_floppy_sector) +#ifdef TESTING + || ((ft_format_code == fmt_var || ft_format_code == fmt_big) && + (max_floppy_track != 254 || max_floppy_sector != 128)) +#endif + ) { + char segperheadz = ftape_segments_per_head ? ' ' : '?'; + char segpercylz = ftape_segments_per_cylinder ? ' ' : '?'; + TRACE(ft_t_err,"Tape parameters inconsistency, please report"); + TRACE(ft_t_err, "reported = %d/%d/%d/%d/%d/%d", + ft_format_code, + ft_segments_per_track, + ft_tracks_per_tape, + max_floppy_side, + max_floppy_track, + max_floppy_sector); + TRACE(ft_t_err, "required = %d/%d/%d/%d%c/%d%c/%d", + ft_format_code, + ft_segments_per_track, + ft_tracks_per_tape, + ftape_segments_per_head ? + ((ft_segments_per_track * ft_tracks_per_tape -1) / + ftape_segments_per_head ) : + (ft_segments_per_track * ft_tracks_per_tape -1), + segperheadz, + ftape_segments_per_cylinder ? + (ftape_segments_per_head / + ftape_segments_per_cylinder - 1 ) : + ftape_segments_per_head - 1, + segpercylz, + (ftape_segments_per_cylinder * FT_SECTORS_PER_SEGMENT)); + TRACE_EXIT -EIO; + } + ftape_extract_bad_sector_map(address); + TRACE_EXIT 0; +} diff --git a/drivers/char/ftape/lowlevel/ftape-read.h b/drivers/char/ftape/lowlevel/ftape-read.h new file mode 100644 index 000000000000..069f99f2a984 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-read.h @@ -0,0 +1,51 @@ +#ifndef _FTAPE_READ_H +#define _FTAPE_READ_H + +/* + * Copyright (C) 1994-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-read.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:22 $ + * + * This file contains the definitions for the read functions + * for the QIC-117 floppy-tape driver for Linux. + * + */ + +/* ftape-read.c defined global functions. + */ +typedef enum { + FT_RD_SINGLE = 0, + FT_RD_AHEAD = 1, +} ft_read_mode_t; + +extern int ftape_read_header_segment(__u8 *address); +extern int ftape_decode_header_segment(__u8 *address); +extern int ftape_read_segment_fraction(const int segment, + void *address, + const ft_read_mode_t read_mode, + const int start, + const int size); +#define ftape_read_segment(segment, address, read_mode) \ + ftape_read_segment_fraction(segment, address, read_mode, \ + 0, FT_SEGMENT_SIZE) +extern void ftape_zap_read_buffers(void); + +#endif /* _FTAPE_READ_H */ diff --git a/drivers/char/ftape/lowlevel/ftape-rw.c b/drivers/char/ftape/lowlevel/ftape-rw.c new file mode 100644 index 000000000000..c0d6dc2cbfd3 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-rw.c @@ -0,0 +1,1092 @@ +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-rw.c,v $ + * $Revision: 1.7 $ + * $Date: 1997/10/28 14:26:49 $ + * + * This file contains some common code for the segment read and + * segment write routines for the QIC-117 floppy-tape driver for + * Linux. + */ + +#include <linux/string.h> +#include <linux/errno.h> + +#include <linux/ftape.h> +#include <linux/qic117.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/fdc-io.h" +#include "../lowlevel/ftape-init.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-read.h" +#include "../lowlevel/ftape-ecc.h" +#include "../lowlevel/ftape-bsm.h" + +/* Global vars. + */ +int ft_nr_buffers; +buffer_struct *ft_buffer[FT_MAX_NR_BUFFERS]; +static volatile int ft_head; +static volatile int ft_tail; /* not volatile but need same type as head */ +int fdc_setup_error; +location_record ft_location = {-1, 0}; +volatile int ftape_tape_running; + +/* Local vars. + */ +static int overrun_count_offset; +static int inhibit_correction; + +/* maxmimal allowed overshoot when fast seeking + */ +#define OVERSHOOT_LIMIT 10 + +/* Increment cyclic buffer nr. + */ +buffer_struct *ftape_next_buffer(ft_buffer_queue_t pos) +{ + switch (pos) { + case ft_queue_head: + if (++ft_head >= ft_nr_buffers) { + ft_head = 0; + } + return ft_buffer[ft_head]; + case ft_queue_tail: + if (++ft_tail >= ft_nr_buffers) { + ft_tail = 0; + } + return ft_buffer[ft_tail]; + default: + return NULL; + } +} +int ftape_buffer_id(ft_buffer_queue_t pos) +{ + switch(pos) { + case ft_queue_head: return ft_head; + case ft_queue_tail: return ft_tail; + default: return -1; + } +} +buffer_struct *ftape_get_buffer(ft_buffer_queue_t pos) +{ + switch(pos) { + case ft_queue_head: return ft_buffer[ft_head]; + case ft_queue_tail: return ft_buffer[ft_tail]; + default: return NULL; + } +} +void ftape_reset_buffer(void) +{ + ft_head = ft_tail = 0; +} + +buffer_state_enum ftape_set_state(buffer_state_enum new_state) +{ + buffer_state_enum old_state = ft_driver_state; + + ft_driver_state = new_state; + return old_state; +} +/* Calculate Floppy Disk Controller and DMA parameters for a segment. + * head: selects buffer struct in array. + * offset: number of physical sectors to skip (including bad ones). + * count: number of physical sectors to handle (including bad ones). + */ +static int setup_segment(buffer_struct * buff, + int segment_id, + unsigned int sector_offset, + unsigned int sector_count, + int retry) +{ + SectorMap offset_mask; + SectorMap mask; + TRACE_FUN(ft_t_any); + + buff->segment_id = segment_id; + buff->sector_offset = sector_offset; + buff->remaining = sector_count; + buff->head = segment_id / ftape_segments_per_head; + buff->cyl = (segment_id % ftape_segments_per_head) / ftape_segments_per_cylinder; + buff->sect = (segment_id % ftape_segments_per_cylinder) * FT_SECTORS_PER_SEGMENT + 1; + buff->deleted = 0; + offset_mask = (1 << buff->sector_offset) - 1; + mask = ftape_get_bad_sector_entry(segment_id) & offset_mask; + while (mask) { + if (mask & 1) { + offset_mask >>= 1; /* don't count bad sector */ + } + mask >>= 1; + } + buff->data_offset = count_ones(offset_mask); /* good sectors to skip */ + buff->ptr = buff->address + buff->data_offset * FT_SECTOR_SIZE; + TRACE(ft_t_flow, "data offset = %d sectors", buff->data_offset); + if (retry) { + buff->soft_error_map &= offset_mask; /* keep skipped part */ + } else { + buff->hard_error_map = buff->soft_error_map = 0; + } + buff->bad_sector_map = ftape_get_bad_sector_entry(buff->segment_id); + if (buff->bad_sector_map != 0) { + TRACE(ft_t_noise, "segment: %d, bad sector map: %08lx", + buff->segment_id, (long)buff->bad_sector_map); + } else { + TRACE(ft_t_flow, "segment: %d", buff->segment_id); + } + if (buff->sector_offset > 0) { + buff->bad_sector_map >>= buff->sector_offset; + } + if (buff->sector_offset != 0 || buff->remaining != FT_SECTORS_PER_SEGMENT) { + TRACE(ft_t_flow, "sector offset = %d, count = %d", + buff->sector_offset, buff->remaining); + } + /* Segments with 3 or less sectors are not written with valid + * data because there is no space left for the ecc. The + * data written is whatever happens to be in the buffer. + * Reading such a segment will return a zero byte-count. + * To allow us to read/write segments with all bad sectors + * we fake one readable sector in the segment. This + * prevents having to handle these segments in a very + * special way. It is not important if the reading of this + * bad sector fails or not (the data is ignored). It is + * only read to keep the driver running. + * + * The QIC-40/80 spec. has no information on how to handle + * this case, so this is my interpretation. + */ + if (buff->bad_sector_map == EMPTY_SEGMENT) { + TRACE(ft_t_flow, "empty segment %d, fake first sector good", + buff->segment_id); + if (buff->ptr != buff->address) { + TRACE(ft_t_bug, "This is a bug: %p/%p", + buff->ptr, buff->address); + } + buff->bad_sector_map = FAKE_SEGMENT; + } + fdc_setup_error = 0; + buff->next_segment = segment_id + 1; + TRACE_EXIT 0; +} + +/* Calculate Floppy Disk Controller and DMA parameters for a new segment. + */ +int ftape_setup_new_segment(buffer_struct * buff, int segment_id, int skip) +{ + int result = 0; + static int old_segment_id = -1; + static buffer_state_enum old_ft_driver_state = idle; + int retry = 0; + unsigned offset = 0; + int count = FT_SECTORS_PER_SEGMENT; + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_flow, "%s segment %d (old = %d)", + (ft_driver_state == reading || ft_driver_state == verifying) + ? "reading" : "writing", + segment_id, old_segment_id); + if (ft_driver_state != old_ft_driver_state) { /* when verifying */ + old_segment_id = -1; + old_ft_driver_state = ft_driver_state; + } + if (segment_id == old_segment_id) { + ++buff->retry; + ++ft_history.retries; + TRACE(ft_t_flow, "setting up for retry nr %d", buff->retry); + retry = 1; + if (skip && buff->skip > 0) { /* allow skip on retry */ + offset = buff->skip; + count -= offset; + TRACE(ft_t_flow, "skipping %d sectors", offset); + } + } else { + buff->retry = 0; + buff->skip = 0; + old_segment_id = segment_id; + } + result = setup_segment(buff, segment_id, offset, count, retry); + TRACE_EXIT result; +} + +/* Determine size of next cluster of good sectors. + */ +int ftape_calc_next_cluster(buffer_struct * buff) +{ + /* Skip bad sectors. + */ + while (buff->remaining > 0 && (buff->bad_sector_map & 1) != 0) { + buff->bad_sector_map >>= 1; + ++buff->sector_offset; + --buff->remaining; + } + /* Find next cluster of good sectors + */ + if (buff->bad_sector_map == 0) { /* speed up */ + buff->sector_count = buff->remaining; + } else { + SectorMap map = buff->bad_sector_map; + + buff->sector_count = 0; + while (buff->sector_count < buff->remaining && (map & 1) == 0) { + ++buff->sector_count; + map >>= 1; + } + } + return buff->sector_count; +} + +/* if just passed the last segment on a track, wait for BOT + * or EOT mark. + */ +int ftape_handle_logical_eot(void) +{ + TRACE_FUN(ft_t_flow); + + if (ft_runner_status == logical_eot) { + int status; + + TRACE(ft_t_noise, "tape at logical EOT"); + TRACE_CATCH(ftape_ready_wait(ftape_timeout.seek, &status),); + if ((status & (QIC_STATUS_AT_BOT | QIC_STATUS_AT_EOT)) == 0) { + TRACE_ABORT(-EIO, ft_t_err, "eot/bot not reached"); + } + ft_runner_status = end_of_tape; + } + if (ft_runner_status == end_of_tape) { + TRACE(ft_t_noise, "runner stopped because of logical EOT"); + ft_runner_status = idle; + } + TRACE_EXIT 0; +} + +static int check_bot_eot(int status) +{ + TRACE_FUN(ft_t_flow); + + if (status & (QIC_STATUS_AT_BOT | QIC_STATUS_AT_EOT)) { + ft_location.bot = ((ft_location.track & 1) == 0 ? + (status & QIC_STATUS_AT_BOT) != 0: + (status & QIC_STATUS_AT_EOT) != 0); + ft_location.eot = !ft_location.bot; + ft_location.segment = (ft_location.track + + (ft_location.bot ? 0 : 1)) * ft_segments_per_track - 1; + ft_location.sector = -1; + ft_location.known = 1; + TRACE(ft_t_flow, "tape at logical %s", + ft_location.bot ? "bot" : "eot"); + TRACE(ft_t_flow, "segment = %d", ft_location.segment); + } else { + ft_location.known = 0; + } + TRACE_EXIT ft_location.known; +} + +/* Read Id of first sector passing tape head. + */ +static int ftape_read_id(void) +{ + int status; + __u8 out[2]; + TRACE_FUN(ft_t_any); + + /* Assume tape is running on entry, be able to handle + * situation where it stopped or is stopping. + */ + ft_location.known = 0; /* default is location not known */ + out[0] = FDC_READID; + out[1] = ft_drive_sel; + TRACE_CATCH(fdc_command(out, 2),); + switch (fdc_interrupt_wait(20 * FT_SECOND)) { + case 0: + if (fdc_sect == 0) { + if (ftape_report_drive_status(&status) >= 0 && + (status & QIC_STATUS_READY)) { + ftape_tape_running = 0; + TRACE(ft_t_flow, "tape has stopped"); + check_bot_eot(status); + } + } else { + ft_location.known = 1; + ft_location.segment = (ftape_segments_per_head + * fdc_head + + ftape_segments_per_cylinder + * fdc_cyl + + (fdc_sect - 1) + / FT_SECTORS_PER_SEGMENT); + ft_location.sector = ((fdc_sect - 1) + % FT_SECTORS_PER_SEGMENT); + ft_location.eot = ft_location.bot = 0; + } + break; + case -ETIME: + /* Didn't find id on tape, must be near end: Wait + * until stopped. + */ + if (ftape_ready_wait(FT_FOREVER, &status) >= 0) { + ftape_tape_running = 0; + TRACE(ft_t_flow, "tape has stopped"); + check_bot_eot(status); + } + break; + default: + /* Interrupted or otherwise failing + * fdc_interrupt_wait() + */ + TRACE(ft_t_err, "fdc_interrupt_wait failed"); + break; + } + if (!ft_location.known) { + TRACE_ABORT(-EIO, ft_t_flow, "no id found"); + } + if (ft_location.sector == 0) { + TRACE(ft_t_flow, "passing segment %d/%d", + ft_location.segment, ft_location.sector); + } else { + TRACE(ft_t_fdc_dma, "passing segment %d/%d", + ft_location.segment, ft_location.sector); + } + TRACE_EXIT 0; +} + +static int logical_forward(void) +{ + ftape_tape_running = 1; + return ftape_command(QIC_LOGICAL_FORWARD); +} + +int ftape_stop_tape(int *pstatus) +{ + int retry = 0; + int result; + TRACE_FUN(ft_t_flow); + + do { + result = ftape_command_wait(QIC_STOP_TAPE, + ftape_timeout.stop, pstatus); + if (result == 0) { + if ((*pstatus & QIC_STATUS_READY) == 0) { + result = -EIO; + } else { + ftape_tape_running = 0; + } + } + } while (result < 0 && ++retry <= 3); + if (result < 0) { + TRACE(ft_t_err, "failed ! (fatal)"); + } + TRACE_EXIT result; +} + +int ftape_dumb_stop(void) +{ + int result; + int status; + TRACE_FUN(ft_t_flow); + + /* Abort current fdc operation if it's busy (probably read + * or write operation pending) with a reset. + */ + if (fdc_ready_wait(100 /* usec */) < 0) { + TRACE(ft_t_noise, "aborting fdc operation"); + fdc_reset(); + } + /* Reading id's after the last segment on a track may fail + * but eventually the drive will become ready (logical eot). + */ + result = ftape_report_drive_status(&status); + ft_location.known = 0; + do { + if (result == 0 && status & QIC_STATUS_READY) { + /* Tape is not running any more. + */ + TRACE(ft_t_noise, "tape already halted"); + check_bot_eot(status); + ftape_tape_running = 0; + } else if (ftape_tape_running) { + /* Tape is (was) still moving. + */ +#ifdef TESTING + ftape_read_id(); +#endif + result = ftape_stop_tape(&status); + } else { + /* Tape not yet ready but stopped. + */ + result = ftape_ready_wait(ftape_timeout.pause,&status); + } + } while (ftape_tape_running + && !(sigtestsetmask(¤t->pending.signal, _NEVER_BLOCK))); +#ifndef TESTING + ft_location.known = 0; +#endif + if (ft_runner_status == aborting || ft_runner_status == do_abort) { + ft_runner_status = idle; + } + TRACE_EXIT result; +} + +/* Wait until runner has finished tail buffer. + * + */ +int ftape_wait_segment(buffer_state_enum state) +{ + int status; + int result = 0; + TRACE_FUN(ft_t_flow); + + while (ft_buffer[ft_tail]->status == state) { + TRACE(ft_t_flow, "state: %d", ft_buffer[ft_tail]->status); + /* First buffer still being worked on, wait up to timeout. + * + * Note: we check two times for being killed. 50 + * seconds are quite long. Note that + * fdc_interrupt_wait() is not killable by any + * means. ftape_read_segment() wants us to return + * -EINTR in case of a signal. + */ + FT_SIGNAL_EXIT(_DONT_BLOCK); + result = fdc_interrupt_wait(50 * FT_SECOND); + FT_SIGNAL_EXIT(_DONT_BLOCK); + if (result < 0) { + TRACE_ABORT(result, + ft_t_err, "fdc_interrupt_wait failed"); + } + if (fdc_setup_error) { + /* recover... FIXME */ + TRACE_ABORT(-EIO, ft_t_err, "setup error"); + } + } + if (ft_buffer[ft_tail]->status != error) { + TRACE_EXIT 0; + } + TRACE_CATCH(ftape_report_drive_status(&status),); + TRACE(ft_t_noise, "ftape_report_drive_status: 0x%02x", status); + if ((status & QIC_STATUS_READY) && + (status & QIC_STATUS_ERROR)) { + unsigned int error; + qic117_cmd_t command; + + /* Report and clear error state. + * In case the drive can't operate at the selected + * rate, select the next lower data rate. + */ + ftape_report_error(&error, &command, 1); + if (error == 31 && command == QIC_LOGICAL_FORWARD) { + /* drive does not accept this data rate */ + if (ft_data_rate > 250) { + TRACE(ft_t_info, + "Probable data rate conflict"); + TRACE(ft_t_info, + "Lowering data rate to %d Kbps", + ft_data_rate / 2); + ftape_half_data_rate(); + if (ft_buffer[ft_tail]->retry > 0) { + /* give it a chance */ + --ft_buffer[ft_tail]->retry; + } + } else { + /* no rate is accepted... */ + TRACE(ft_t_err, "We're dead :("); + } + } else { + TRACE(ft_t_err, "Unknown error"); + } + TRACE_EXIT -EIO; /* g.p. error */ + } + TRACE_EXIT 0; +} + +/* forward */ static int seek_forward(int segment_id, int fast); + +static int fast_seek(int count, int reverse) +{ + int result = 0; + int status; + TRACE_FUN(ft_t_flow); + + if (count > 0) { + /* If positioned at begin or end of tape, fast seeking needs + * special treatment. + * Starting from logical bot needs a (slow) seek to the first + * segment before the high speed seek. Most drives do this + * automatically but some older don't, so we treat them + * all the same. + * Starting from logical eot is even more difficult because + * we cannot (slow) reverse seek to the last segment. + * TO BE IMPLEMENTED. + */ + inhibit_correction = 0; + if (ft_location.known && + ((ft_location.bot && !reverse) || + (ft_location.eot && reverse))) { + if (!reverse) { + /* (slow) skip to first segment on a track + */ + seek_forward(ft_location.track * ft_segments_per_track, 0); + --count; + } else { + /* When seeking backwards from + * end-of-tape the number of erased + * gaps found seems to be higher than + * expected. Therefor the drive must + * skip some more segments than + * calculated, but we don't know how + * many. Thus we will prevent the + * re-calculation of offset and + * overshoot when seeking backwards. + */ + inhibit_correction = 1; + count += 3; /* best guess */ + } + } + } else { + TRACE(ft_t_flow, "warning: zero or negative count: %d", count); + } + if (count > 0) { + int i; + int nibbles = count > 255 ? 3 : 2; + + if (count > 4095) { + TRACE(ft_t_noise, "skipping clipped at 4095 segment"); + count = 4095; + } + /* Issue this tape command first. */ + if (!reverse) { + TRACE(ft_t_noise, "skipping %d segment(s)", count); + result = ftape_command(nibbles == 3 ? + QIC_SKIP_EXTENDED_FORWARD : QIC_SKIP_FORWARD); + } else { + TRACE(ft_t_noise, "backing up %d segment(s)", count); + result = ftape_command(nibbles == 3 ? + QIC_SKIP_EXTENDED_REVERSE : QIC_SKIP_REVERSE); + } + if (result < 0) { + TRACE(ft_t_noise, "Skip command failed"); + } else { + --count; /* 0 means one gap etc. */ + for (i = 0; i < nibbles; ++i) { + if (result >= 0) { + result = ftape_parameter(count & 15); + count /= 16; + } + } + result = ftape_ready_wait(ftape_timeout.rewind, &status); + if (result >= 0) { + ftape_tape_running = 0; + } + } + } + TRACE_EXIT result; +} + +static int validate(int id) +{ + /* Check to see if position found is off-track as reported + * once. Because all tracks in one direction lie next to + * each other, if off-track the error will be approximately + * 2 * ft_segments_per_track. + */ + if (ft_location.track == -1) { + return 1; /* unforseen situation, don't generate error */ + } else { + /* Use margin of ft_segments_per_track on both sides + * because ftape needs some margin and the error we're + * looking for is much larger ! + */ + int lo = (ft_location.track - 1) * ft_segments_per_track; + int hi = (ft_location.track + 2) * ft_segments_per_track; + + return (id >= lo && id < hi); + } +} + +static int seek_forward(int segment_id, int fast) +{ + int failures = 0; + int count; + static int margin = 1; /* fixed: stop this before target */ + static int overshoot = 1; + static int min_count = 8; + int expected = -1; + int target = segment_id - margin; + int fast_seeking; + int prev_segment = ft_location.segment; + TRACE_FUN(ft_t_flow); + + if (!ft_location.known) { + TRACE_ABORT(-EIO, ft_t_err, + "fatal: cannot seek from unknown location"); + } + if (!validate(segment_id)) { + ftape_sleep(1 * FT_SECOND); + ft_failure = 1; + TRACE_ABORT(-EIO, ft_t_err, + "fatal: head off track (bad hardware?)"); + } + TRACE(ft_t_noise, "from %d/%d to %d/0 - %d", + ft_location.segment, ft_location.sector,segment_id,margin); + count = target - ft_location.segment - overshoot; + fast_seeking = (fast && + count > (min_count + (ft_location.bot ? 1 : 0))); + if (fast_seeking) { + TRACE(ft_t_noise, "fast skipping %d segments", count); + expected = segment_id - margin; + fast_seek(count, 0); + } + if (!ftape_tape_running) { + logical_forward(); + } + while (ft_location.segment < segment_id) { + /* This requires at least one sector in a (bad) segment to + * have a valid and readable sector id ! + * It looks like this is not guaranteed, so we must try + * to find a way to skip an EMPTY_SEGMENT. !!! FIXME !!! + */ + if (ftape_read_id() < 0 || !ft_location.known || + sigtestsetmask(¤t->pending.signal, _DONT_BLOCK)) { + ft_location.known = 0; + if (!ftape_tape_running || + ++failures > FT_SECTORS_PER_SEGMENT) { + TRACE_ABORT(-EIO, ft_t_err, + "read_id failed completely"); + } + FT_SIGNAL_EXIT(_DONT_BLOCK); + TRACE(ft_t_flow, "read_id failed, retry (%d)", + failures); + continue; + } + if (fast_seeking) { + TRACE(ft_t_noise, "ended at %d/%d (%d,%d)", + ft_location.segment, ft_location.sector, + overshoot, inhibit_correction); + if (!inhibit_correction && + (ft_location.segment < expected || + ft_location.segment > expected + margin)) { + int error = ft_location.segment - expected; + TRACE(ft_t_noise, + "adjusting overshoot from %d to %d", + overshoot, overshoot + error); + overshoot += error; + /* All overshoots have the same + * direction, so it should never + * become negative, but who knows. + */ + if (overshoot < -5 || + overshoot > OVERSHOOT_LIMIT) { + if (overshoot < 0) { + /* keep sane value */ + overshoot = -5; + } else { + /* keep sane value */ + overshoot = OVERSHOOT_LIMIT; + } + TRACE(ft_t_noise, + "clipped overshoot to %d", + overshoot); + } + } + fast_seeking = 0; + } + if (ft_location.known) { + if (ft_location.segment > prev_segment + 1) { + TRACE(ft_t_noise, + "missed segment %d while skipping", + prev_segment + 1); + } + prev_segment = ft_location.segment; + } + } + if (ft_location.segment > segment_id) { + TRACE_ABORT(-EIO, + ft_t_noise, "failed: skip ended at segment %d/%d", + ft_location.segment, ft_location.sector); + } + TRACE_EXIT 0; +} + +static int skip_reverse(int segment_id, int *pstatus) +{ + int failures = 0; + static int overshoot = 1; + static int min_rewind = 2; /* 1 + overshoot */ + static const int margin = 1; /* stop this before target */ + int expected = 0; + int count = 1; + int short_seek; + int target = segment_id - margin; + TRACE_FUN(ft_t_flow); + + if (ft_location.known && !validate(segment_id)) { + ftape_sleep(1 * FT_SECOND); + ft_failure = 1; + TRACE_ABORT(-EIO, ft_t_err, + "fatal: head off track (bad hardware?)"); + } + do { + if (!ft_location.known) { + TRACE(ft_t_warn, "warning: location not known"); + } + TRACE(ft_t_noise, "from %d/%d to %d/0 - %d", + ft_location.segment, ft_location.sector, + segment_id, margin); + /* min_rewind == 1 + overshoot_when_doing_minimum_rewind + * overshoot == overshoot_when_doing_larger_rewind + * Initially min_rewind == 1 + overshoot, optimization + * of both values will be done separately. + * overshoot and min_rewind can be negative as both are + * sums of three components: + * any_overshoot == rewind_overshoot - + * stop_overshoot - + * start_overshoot + */ + if (ft_location.segment - target - (min_rewind - 1) < 1) { + short_seek = 1; + } else { + count = ft_location.segment - target - overshoot; + short_seek = (count < 1); + } + if (short_seek) { + count = 1; /* do shortest rewind */ + expected = ft_location.segment - min_rewind; + if (expected/ft_segments_per_track != ft_location.track) { + expected = (ft_location.track * + ft_segments_per_track); + } + } else { + expected = target; + } + fast_seek(count, 1); + logical_forward(); + if (ftape_read_id() < 0 || !ft_location.known || + (sigtestsetmask(¤t->pending.signal, _DONT_BLOCK))) { + if ((!ftape_tape_running && !ft_location.known) || + ++failures > FT_SECTORS_PER_SEGMENT) { + TRACE_ABORT(-EIO, ft_t_err, + "read_id failed completely"); + } + FT_SIGNAL_EXIT(_DONT_BLOCK); + TRACE_CATCH(ftape_report_drive_status(pstatus),); + TRACE(ft_t_noise, "ftape_read_id failed, retry (%d)", + failures); + continue; + } + TRACE(ft_t_noise, "ended at %d/%d (%d,%d,%d)", + ft_location.segment, ft_location.sector, + min_rewind, overshoot, inhibit_correction); + if (!inhibit_correction && + (ft_location.segment < expected || + ft_location.segment > expected + margin)) { + int error = expected - ft_location.segment; + if (short_seek) { + TRACE(ft_t_noise, + "adjusting min_rewind from %d to %d", + min_rewind, min_rewind + error); + min_rewind += error; + if (min_rewind < -5) { + /* is this right ? FIXME ! */ + /* keep sane value */ + min_rewind = -5; + TRACE(ft_t_noise, + "clipped min_rewind to %d", + min_rewind); + } + } else { + TRACE(ft_t_noise, + "adjusting overshoot from %d to %d", + overshoot, overshoot + error); + overshoot += error; + if (overshoot < -5 || + overshoot > OVERSHOOT_LIMIT) { + if (overshoot < 0) { + /* keep sane value */ + overshoot = -5; + } else { + /* keep sane value */ + overshoot = OVERSHOOT_LIMIT; + } + TRACE(ft_t_noise, + "clipped overshoot to %d", + overshoot); + } + } + } + } while (ft_location.segment > segment_id); + if (ft_location.known) { + TRACE(ft_t_noise, "current location: %d/%d", + ft_location.segment, ft_location.sector); + } + TRACE_EXIT 0; +} + +static int determine_position(void) +{ + int retry = 0; + int status; + int result; + TRACE_FUN(ft_t_flow); + + if (!ftape_tape_running) { + /* This should only happen if tape is stopped by isr. + */ + TRACE(ft_t_flow, "waiting for tape stop"); + if (ftape_ready_wait(ftape_timeout.pause, &status) < 0) { + TRACE(ft_t_flow, "drive still running (fatal)"); + ftape_tape_running = 1; /* ? */ + } + } else { + ftape_report_drive_status(&status); + } + if (status & QIC_STATUS_READY) { + /* Drive must be ready to check error state ! + */ + TRACE(ft_t_flow, "drive is ready"); + if (status & QIC_STATUS_ERROR) { + unsigned int error; + qic117_cmd_t command; + + /* Report and clear error state, try to continue. + */ + TRACE(ft_t_flow, "error status set"); + ftape_report_error(&error, &command, 1); + ftape_ready_wait(ftape_timeout.reset, &status); + ftape_tape_running = 0; /* ? */ + } + if (check_bot_eot(status)) { + if (ft_location.bot) { + if ((status & QIC_STATUS_READY) == 0) { + /* tape moving away from + * bot/eot, let's see if we + * can catch up with the first + * segment on this track. + */ + } else { + TRACE(ft_t_flow, + "start tape from logical bot"); + logical_forward(); /* start moving */ + } + } else { + if ((status & QIC_STATUS_READY) == 0) { + TRACE(ft_t_noise, "waiting for logical end of track"); + result = ftape_ready_wait(ftape_timeout.reset, &status); + /* error handling needed ? */ + } else { + TRACE(ft_t_noise, + "tape at logical end of track"); + } + } + } else { + TRACE(ft_t_flow, "start tape"); + logical_forward(); /* start moving */ + ft_location.known = 0; /* not cleared by logical forward ! */ + } + } + /* tape should be moving now, start reading id's + */ + while (!ft_location.known && + retry++ < FT_SECTORS_PER_SEGMENT && + (result = ftape_read_id()) < 0) { + + TRACE(ft_t_flow, "location unknown"); + + /* exit on signal + */ + FT_SIGNAL_EXIT(_DONT_BLOCK); + + /* read-id somehow failed, tape may + * have reached end or some other + * error happened. + */ + TRACE(ft_t_flow, "read-id failed"); + TRACE_CATCH(ftape_report_drive_status(&status),); + TRACE(ft_t_err, "ftape_report_drive_status: 0x%02x", status); + if (status & QIC_STATUS_READY) { + ftape_tape_running = 0; + TRACE(ft_t_noise, "tape stopped for unknown reason! " + "status = 0x%02x", status); + if (status & QIC_STATUS_ERROR || + !check_bot_eot(status)) { + /* oops, tape stopped but not at end! + */ + TRACE_EXIT -EIO; + } + } + } + TRACE(ft_t_flow, + "tape is positioned at segment %d", ft_location.segment); + TRACE_EXIT ft_location.known ? 0 : -EIO; +} + +/* Get the tape running and position it just before the + * requested segment. + * Seek tape-track and reposition as needed. + */ +int ftape_start_tape(int segment_id, int sector_offset) +{ + int track = segment_id / ft_segments_per_track; + int result = -EIO; + int status; + static int last_segment = -1; + static int bad_bus_timing = 0; + /* number of segments passing the head between starting the tape + * and being able to access the first sector. + */ + static int start_offset = 1; + int retry; + TRACE_FUN(ft_t_flow); + + /* If sector_offset > 0, seek into wanted segment instead of + * into previous. + * This allows error recovery if a part of the segment is bad + * (erased) causing the tape drive to generate an index pulse + * thus causing a no-data error before the requested sector + * is reached. + */ + ftape_tape_running = 0; + TRACE(ft_t_noise, "target segment: %d/%d%s", segment_id, sector_offset, + ft_buffer[ft_head]->retry > 0 ? " retry" : ""); + if (ft_buffer[ft_head]->retry > 0) { /* this is a retry */ + int dist = segment_id - last_segment; + + if ((int)ft_history.overrun_errors < overrun_count_offset) { + overrun_count_offset = ft_history.overrun_errors; + } else if (dist < 0 || dist > 50) { + overrun_count_offset = ft_history.overrun_errors; + } else if ((ft_history.overrun_errors - + overrun_count_offset) >= 8) { + if (ftape_increase_threshold() >= 0) { + --ft_buffer[ft_head]->retry; + overrun_count_offset = + ft_history.overrun_errors; + TRACE(ft_t_warn, "increased threshold because " + "of excessive overrun errors"); + } else if (!bad_bus_timing && ft_data_rate >= 1000) { + ftape_half_data_rate(); + --ft_buffer[ft_head]->retry; + bad_bus_timing = 1; + overrun_count_offset = + ft_history.overrun_errors; + TRACE(ft_t_warn, "reduced datarate because " + "of excessive overrun errors"); + } + } + } + last_segment = segment_id; + if (ft_location.track != track || + (ftape_might_be_off_track && ft_buffer[ft_head]->retry== 0)) { + /* current track unknown or not equal to destination + */ + ftape_ready_wait(ftape_timeout.seek, &status); + ftape_seek_head_to_track(track); + /* overrun_count_offset = ft_history.overrun_errors; */ + } + result = -EIO; + retry = 0; + while (result < 0 && + retry++ <= 5 && + !ft_failure && + !(sigtestsetmask(¤t->pending.signal, _DONT_BLOCK))) { + + if (retry && start_offset < 5) { + start_offset ++; + } + /* Check if we are able to catch the requested + * segment in time. + */ + if ((ft_location.known || (determine_position() == 0)) && + ft_location.segment >= + (segment_id - + ((ftape_tape_running || ft_location.bot) + ? 0 : start_offset))) { + /* Too far ahead (in or past target segment). + */ + if (ftape_tape_running) { + if ((result = ftape_stop_tape(&status)) < 0) { + TRACE(ft_t_err, + "stop tape failed with code %d", + result); + break; + } + TRACE(ft_t_noise, "tape stopped"); + ftape_tape_running = 0; + } + TRACE(ft_t_noise, "repositioning"); + ++ft_history.rewinds; + if (segment_id % ft_segments_per_track < start_offset){ + TRACE(ft_t_noise, "end of track condition\n" + KERN_INFO "segment_id : %d\n" + KERN_INFO "ft_segments_per_track: %d\n" + KERN_INFO "start_offset : %d", + segment_id, ft_segments_per_track, + start_offset); + + /* If seeking to first segments on + * track better do a complete rewind + * to logical begin of track to get a + * more steady tape motion. + */ + result = ftape_command_wait( + (ft_location.track & 1) + ? QIC_PHYSICAL_FORWARD + : QIC_PHYSICAL_REVERSE, + ftape_timeout.rewind, &status); + check_bot_eot(status); /* update location */ + } else { + result= skip_reverse(segment_id - start_offset, + &status); + } + } + if (!ft_location.known) { + TRACE(ft_t_bug, "panic: location not known"); + result = -EIO; + continue; /* while() will check for failure */ + } + TRACE(ft_t_noise, "current segment: %d/%d", + ft_location.segment, ft_location.sector); + /* We're on the right track somewhere before the + * wanted segment. Start tape movement if needed and + * skip to just before or inside the requested + * segment. Keep tape running. + */ + result = 0; + if (ft_location.segment < + (segment_id - ((ftape_tape_running || ft_location.bot) + ? 0 : start_offset))) { + if (sector_offset > 0) { + result = seek_forward(segment_id, + retry <= 3); + } else { + result = seek_forward(segment_id - 1, + retry <= 3); + } + } + if (result == 0 && + ft_location.segment != + (segment_id - (sector_offset > 0 ? 0 : 1))) { + result = -EIO; + } + } + if (result < 0) { + TRACE(ft_t_err, "failed to reposition"); + } else { + ft_runner_status = running; + } + TRACE_EXIT result; +} diff --git a/drivers/char/ftape/lowlevel/ftape-rw.h b/drivers/char/ftape/lowlevel/ftape-rw.h new file mode 100644 index 000000000000..32f4feeb887c --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-rw.h @@ -0,0 +1,111 @@ +#ifndef _FTAPE_RW_H +#define _FTAPE_RW_H + +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-rw.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:25 $ + * + * This file contains the definitions for the read and write + * functions for the QIC-117 floppy-tape driver for Linux. + * + * Claus-Justus Heine (1996/09/20): Add definition of format code 6 + * Claus-Justus Heine (1996/10/04): Changed GET/PUT macros to cast to (__u8 *) + * + */ + +#include "../lowlevel/fdc-io.h" +#include "../lowlevel/ftape-init.h" +#include "../lowlevel/ftape-bsm.h" + +#include <asm/unaligned.h> + +#define GET2(address, offset) get_unaligned((__u16*)((__u8 *)address + offset)) +#define GET4(address, offset) get_unaligned((__u32*)((__u8 *)address + offset)) +#define GET8(address, offset) get_unaligned((__u64*)((__u8 *)address + offset)) +#define PUT2(address, offset , value) put_unaligned((value), (__u16*)((__u8 *)address + offset)) +#define PUT4(address, offset , value) put_unaligned((value), (__u32*)((__u8 *)address + offset)) +#define PUT8(address, offset , value) put_unaligned((value), (__u64*)((__u8 *)address + offset)) + +enum runner_status_enum { + idle = 0, + running, + do_abort, + aborting, + logical_eot, + end_of_tape, +}; + +typedef enum ft_buffer_queue { + ft_queue_head = 0, + ft_queue_tail = 1 +} ft_buffer_queue_t; + + +typedef struct { + int track; /* tape head position */ + volatile int segment; /* current segment */ + volatile int sector; /* sector offset within current segment */ + volatile unsigned int bot; /* logical begin of track */ + volatile unsigned int eot; /* logical end of track */ + volatile unsigned int known; /* validates bot, segment, sector */ +} location_record; + +/* Count nr of 1's in pattern. + */ +static inline int count_ones(unsigned long mask) +{ + int bits; + + for (bits = 0; mask != 0; mask >>= 1) { + if (mask & 1) { + ++bits; + } + } + return bits; +} + +#define FT_MAX_NR_BUFFERS 16 /* arbitrary value */ +/* ftape-rw.c defined global vars. + */ +extern buffer_struct *ft_buffer[FT_MAX_NR_BUFFERS]; +extern int ft_nr_buffers; +extern location_record ft_location; +extern volatile int ftape_tape_running; + +/* ftape-rw.c defined global functions. + */ +extern int ftape_setup_new_segment(buffer_struct * buff, + int segment_id, + int offset); +extern int ftape_calc_next_cluster(buffer_struct * buff); +extern buffer_struct *ftape_next_buffer (ft_buffer_queue_t pos); +extern buffer_struct *ftape_get_buffer (ft_buffer_queue_t pos); +extern int ftape_buffer_id (ft_buffer_queue_t pos); +extern void ftape_reset_buffer(void); +extern void ftape_tape_parameters(__u8 drive_configuration); +extern int ftape_wait_segment(buffer_state_enum state); +extern int ftape_dumb_stop(void); +extern int ftape_start_tape(int segment_id, int offset); +extern int ftape_stop_tape(int *pstatus); +extern int ftape_handle_logical_eot(void); +extern buffer_state_enum ftape_set_state(buffer_state_enum new_state); +#endif /* _FTAPE_RW_H */ diff --git a/drivers/char/ftape/lowlevel/ftape-setup.c b/drivers/char/ftape/lowlevel/ftape-setup.c new file mode 100644 index 000000000000..280a1a55d87e --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-setup.c @@ -0,0 +1,105 @@ +/* + * Copyright (C) 1996, 1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-setup.c,v $ + * $Revision: 1.7 $ + * $Date: 1997/10/10 09:57:06 $ + * + * This file contains the code for processing the kernel command + * line options for the QIC-40/80/3010/3020 floppy-tape driver + * "ftape" for Linux. + */ + +#include <linux/config.h> +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/mm.h> + +#include <linux/ftape.h> +#include <linux/init.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/fdc-io.h" + +static struct param_table { + const char *name; + int *var; + int def_param; + int min; + int max; +} config_params[] __initdata = { +#ifndef CONFIG_FT_NO_TRACE_AT_ALL + { "tracing", &ftape_tracing, 3, ft_t_bug, ft_t_any}, +#endif + { "ioport", &ft_fdc_base, CONFIG_FT_FDC_BASE, 0x0, 0xfff}, + { "irq", &ft_fdc_irq, CONFIG_FT_FDC_IRQ, 2, 15}, + { "dma", &ft_fdc_dma, CONFIG_FT_FDC_DMA, 0, 3}, + { "threshold", &ft_fdc_threshold, CONFIG_FT_FDC_THR, 1, 16}, + { "datarate", &ft_fdc_rate_limit, CONFIG_FT_FDC_MAX_RATE, 500, 2000}, + { "fc10", &ft_probe_fc10, CONFIG_FT_PROBE_FC10, 0, 1}, + { "mach2", &ft_mach2, CONFIG_FT_MACH2, 0, 1} +}; + +static int __init ftape_setup(char *str) +{ + int i; + int param; + int ints[2]; + + TRACE_FUN(ft_t_flow); + + str = get_options(str, ARRAY_SIZE(ints), ints); + if (str) { + for (i=0; i < NR_ITEMS(config_params); i++) { + if (strcmp(str,config_params[i].name) == 0){ + if (ints[0]) { + param = ints[1]; + } else { + param = config_params[i].def_param; + } + if (param < config_params[i].min || + param > config_params[i].max) { + TRACE(ft_t_err, + "parameter %s out of range %d ... %d", + config_params[i].name, + config_params[i].min, + config_params[i].max); + goto out; + } + if(config_params[i].var) { + TRACE(ft_t_info, "%s=%d", str, param); + *config_params[i].var = param; + } + goto out; + } + } + } + if (str) { + TRACE(ft_t_err, "unknown ftape option [%s]", str); + + TRACE(ft_t_err, "allowed options are:"); + for (i=0; i < NR_ITEMS(config_params); i++) { + TRACE(ft_t_err, " %s",config_params[i].name); + } + } else { + TRACE(ft_t_err, "botched ftape option"); + } + out: + TRACE_EXIT 1; +} + +__setup("ftape=", ftape_setup); diff --git a/drivers/char/ftape/lowlevel/ftape-tracing.c b/drivers/char/ftape/lowlevel/ftape-tracing.c new file mode 100644 index 000000000000..7fdc6567440b --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-tracing.c @@ -0,0 +1,118 @@ +/* + * Copyright (C) 1993-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-tracing.c,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:27 $ + * + * This file contains the reading code + * for the QIC-117 floppy-tape driver for Linux. + */ + +#include <linux/ftape.h> +#include "../lowlevel/ftape-tracing.h" + +/* Global vars. + */ +/* tracing + * set it to: to log : + * 0 bugs + * 1 + errors + * 2 + warnings + * 3 + information + * 4 + more information + * 5 + program flow + * 6 + fdc/dma info + * 7 + data flow + * 8 + everything else + */ +ft_trace_t ftape_tracing = ft_t_info; /* Default level: information and up */ +int ftape_function_nest_level; + +/* Local vars. + */ +static __u8 trace_id; +static char spacing[] = "* "; + +void ftape_trace_call(const char *file, const char *name) +{ + char *indent; + + /* Since printk seems not to work with "%*s" format + * we'll use this work-around. + */ + if (ftape_function_nest_level < 0) { + printk(KERN_INFO "function nest level (%d) < 0\n", + ftape_function_nest_level); + ftape_function_nest_level = 0; + } + if (ftape_function_nest_level < sizeof(spacing)) { + indent = (spacing + + sizeof(spacing) - 1 - + ftape_function_nest_level); + } else { + indent = spacing; + } + printk(KERN_INFO "[%03d]%s+%s (%s)\n", + (int) trace_id++, indent, file, name); +} + +void ftape_trace_exit(const char *file, const char *name) +{ + char *indent; + + /* Since printk seems not to work with "%*s" format + * we'll use this work-around. + */ + if (ftape_function_nest_level < 0) { + printk(KERN_INFO "function nest level (%d) < 0\n", ftape_function_nest_level); + ftape_function_nest_level = 0; + } + if (ftape_function_nest_level < sizeof(spacing)) { + indent = (spacing + + sizeof(spacing) - 1 - + ftape_function_nest_level); + } else { + indent = spacing; + } + printk(KERN_INFO "[%03d]%s-%s (%s)\n", + (int) trace_id++, indent, file, name); +} + +void ftape_trace_log(const char *file, const char *function) +{ + char *indent; + + /* Since printk seems not to work with "%*s" format + * we'll use this work-around. + */ + if (ftape_function_nest_level < 0) { + printk(KERN_INFO "function nest level (%d) < 0\n", ftape_function_nest_level); + ftape_function_nest_level = 0; + } + if (ftape_function_nest_level < sizeof(spacing)) { + indent = (spacing + + sizeof(spacing) - 1 - + ftape_function_nest_level); + } else { + indent = spacing; + } + printk(KERN_INFO "[%03d]%s%s (%s) - ", + (int) trace_id++, indent, file, function); +} diff --git a/drivers/char/ftape/lowlevel/ftape-tracing.h b/drivers/char/ftape/lowlevel/ftape-tracing.h new file mode 100644 index 000000000000..fa7cd20ee66c --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-tracing.h @@ -0,0 +1,180 @@ +#ifndef _FTAPE_TRACING_H +#define _FTAPE_TRACING_H + +/* + * Copyright (C) 1994-1996 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-tracing.h,v $ + * $Revision: 1.2 $ + * $Date: 1997/10/05 19:18:28 $ + * + * This file contains definitions that eases the debugging of the + * QIC-40/80/3010/3020 floppy-tape driver "ftape" for Linux. + */ + +#include <linux/config.h> +#include <linux/kernel.h> + +/* + * Be very careful with TRACE_EXIT and TRACE_ABORT. + * + * if (something) TRACE_EXIT error; + * + * will NOT work. Use + * + * if (something) { + * TRACE_EXIT error; + * } + * + * instead. Maybe a bit dangerous, but save lots of lines of code. + */ + +#define LL_X "%d/%d KB" +#define LL(x) (unsigned int)((__u64)(x)>>10), (unsigned int)((x)&1023) + +typedef enum { + ft_t_nil = -1, + ft_t_bug, + ft_t_err, + ft_t_warn, + ft_t_info, + ft_t_noise, + ft_t_flow, + ft_t_fdc_dma, + ft_t_data_flow, + ft_t_any +} ft_trace_t; + +#ifdef CONFIG_FT_NO_TRACE_AT_ALL +/* the compiler will optimize away most TRACE() macros + */ +#define FT_TRACE_TOP_LEVEL ft_t_bug +#define TRACE_FUN(level) do {} while(0) +#define TRACE_EXIT return +#define TRACE(l, m, i...) \ +{ \ + if ((ft_trace_t)(l) == FT_TRACE_TOP_LEVEL) { \ + printk(KERN_INFO"ftape%s(%s):\n" \ + KERN_INFO m".\n" ,__FILE__, __FUNCTION__ , ##i); \ + } \ +} +#define SET_TRACE_LEVEL(l) if ((l) == (l)) do {} while(0) +#define TRACE_LEVEL FT_TRACE_TOP_LEVEL + +#else + +#ifdef CONFIG_FT_NO_TRACE +/* the compiler will optimize away many TRACE() macros + * the ftape_simple_trace_call() function simply increments + * the function nest level. + */ +#define FT_TRACE_TOP_LEVEL ft_t_warn +#define TRACE_FUN(level) ftape_function_nest_level++ +#define TRACE_EXIT ftape_function_nest_level--; return + +#else +#ifdef CONFIG_FT_FULL_DEBUG +#define FT_TRACE_TOP_LEVEL ft_t_any +#else +#define FT_TRACE_TOP_LEVEL ft_t_flow +#endif +#define TRACE_FUN(level) \ + const ft_trace_t _tracing = level; \ + if (ftape_tracing >= (ft_trace_t)(level) && \ + (ft_trace_t)(level) <= FT_TRACE_TOP_LEVEL) \ + ftape_trace_call(__FILE__, __FUNCTION__); \ + ftape_function_nest_level ++; + +#define TRACE_EXIT \ + --ftape_function_nest_level; \ + if (ftape_tracing >= (ft_trace_t)(_tracing) && \ + (ft_trace_t)(_tracing) <= FT_TRACE_TOP_LEVEL) \ + ftape_trace_exit(__FILE__, __FUNCTION__); \ + return + +#endif + +#define TRACE(l, m, i...) \ +{ \ + if (ftape_tracing >= (ft_trace_t)(l) && \ + (ft_trace_t)(l) <= FT_TRACE_TOP_LEVEL) { \ + ftape_trace_log(__FILE__, __FUNCTION__); \ + printk(m".\n" ,##i); \ + } \ +} + +#define SET_TRACE_LEVEL(l) \ +{ \ + if ((ft_trace_t)(l) <= FT_TRACE_TOP_LEVEL) { \ + ftape_tracing = (ft_trace_t)(l); \ + } else { \ + ftape_tracing = FT_TRACE_TOP_LEVEL; \ + } \ +} +#define TRACE_LEVEL \ +((ftape_tracing <= FT_TRACE_TOP_LEVEL) ? ftape_tracing : FT_TRACE_TOP_LEVEL) + + +/* Global variables declared in tracing.c + */ +extern ft_trace_t ftape_tracing; /* sets default level */ +extern int ftape_function_nest_level; + +/* Global functions declared in tracing.c + */ +extern void ftape_trace_call(const char *file, const char *name); +extern void ftape_trace_exit(const char *file, const char *name); +extern void ftape_trace_log (const char *file, const char *name); + +#endif /* !defined(CONFIG_FT_NO_TRACE_AT_ALL) */ + +/* + * Abort with a message. + */ +#define TRACE_ABORT(res, i...) \ +{ \ + TRACE(i); \ + TRACE_EXIT res; \ +} + +/* The following transforms the common "if(result < 0) ... " into a + * one-liner. + */ +#define _TRACE_CATCH(level, fun, action) \ +{ \ + int _res = (fun); \ + if (_res < 0) { \ + do { action /* */ ; } while(0); \ + TRACE_ABORT(_res, level, "%s failed: %d", #fun, _res); \ + } \ +} + +#define TRACE_CATCH(fun, fail) _TRACE_CATCH(ft_t_err, fun, fail) + +/* Abort the current function when signalled. This doesn't belong here, + * but rather into ftape-rw.h (maybe) + */ +#define FT_SIGNAL_EXIT(sig_mask) \ + if (sigtestsetmask(¤t->pending.signal, sig_mask)) { \ + TRACE_ABORT(-EINTR, \ + ft_t_warn, \ + "interrupted by non-blockable signal"); \ + } + +#endif /* _FTAPE_TRACING_H */ diff --git a/drivers/char/ftape/lowlevel/ftape-write.c b/drivers/char/ftape/lowlevel/ftape-write.c new file mode 100644 index 000000000000..45601ec801ee --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-write.c @@ -0,0 +1,336 @@ +/* + * Copyright (C) 1993-1995 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-write.c,v $ + * $Revision: 1.3.4.1 $ + * $Date: 1997/11/14 18:07:04 $ + * + * This file contains the writing code + * for the QIC-117 floppy-tape driver for Linux. + */ + +#include <linux/string.h> +#include <linux/errno.h> +#include <linux/mm.h> + +#include <linux/ftape.h> +#include <linux/qic117.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-write.h" +#include "../lowlevel/ftape-read.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-ecc.h" +#include "../lowlevel/ftape-bsm.h" +#include "../lowlevel/fdc-isr.h" + +/* Global vars. + */ + +/* Local vars. + */ +static int last_write_failed; + +void ftape_zap_write_buffers(void) +{ + int i; + + for (i = 0; i < ft_nr_buffers; ++i) { + ft_buffer[i]->status = done; + } + ftape_reset_buffer(); +} + +static int copy_and_gen_ecc(void *destination, + const void *source, + const SectorMap bad_sector_map) +{ + int result; + struct memory_segment mseg; + int bads = count_ones(bad_sector_map); + TRACE_FUN(ft_t_any); + + if (bads > 0) { + TRACE(ft_t_noise, "bad sectors in map: %d", bads); + } + if (bads + 3 >= FT_SECTORS_PER_SEGMENT) { + TRACE(ft_t_noise, "empty segment"); + mseg.blocks = 0; /* skip entire segment */ + result = 0; /* nothing written */ + } else { + mseg.blocks = FT_SECTORS_PER_SEGMENT - bads; + mseg.data = destination; + memcpy(mseg.data, source, (mseg.blocks - 3) * FT_SECTOR_SIZE); + result = ftape_ecc_set_segment_parity(&mseg); + if (result < 0) { + TRACE(ft_t_err, "ecc_set_segment_parity failed"); + } else { + result = (mseg.blocks - 3) * FT_SECTOR_SIZE; + } + } + TRACE_EXIT result; +} + + +int ftape_start_writing(const ft_write_mode_t mode) +{ + buffer_struct *head = ftape_get_buffer(ft_queue_head); + int segment_id = head->segment_id; + int result; + buffer_state_enum wanted_state = (mode == FT_WR_DELETE + ? deleting + : writing); + TRACE_FUN(ft_t_flow); + + if ((ft_driver_state != wanted_state) || head->status != waiting) { + TRACE_EXIT 0; + } + ftape_setup_new_segment(head, segment_id, 1); + if (mode == FT_WR_SINGLE) { + /* stop tape instead of pause */ + head->next_segment = 0; + } + ftape_calc_next_cluster(head); /* prepare */ + head->status = ft_driver_state; /* either writing or deleting */ + if (ft_runner_status == idle) { + TRACE(ft_t_noise, + "starting runner for segment %d", segment_id); + TRACE_CATCH(ftape_start_tape(segment_id,head->sector_offset),); + } else { + TRACE(ft_t_noise, "runner not idle, not starting tape"); + } + /* go */ + result = fdc_setup_read_write(head, (mode == FT_WR_DELETE + ? FDC_WRITE_DELETED : FDC_WRITE)); + ftape_set_state(wanted_state); /* should not be necessary */ + TRACE_EXIT result; +} + +/* Wait until all data is actually written to tape. + * + * There is a problem: when the tape runs into logical EOT, then this + * failes. We need to restart the runner in this case. + */ +int ftape_loop_until_writes_done(void) +{ + buffer_struct *head; + TRACE_FUN(ft_t_flow); + + while ((ft_driver_state == writing || ft_driver_state == deleting) && + ftape_get_buffer(ft_queue_head)->status != done) { + /* set the runner status to idle if at lEOT */ + TRACE_CATCH(ftape_handle_logical_eot(), last_write_failed = 1); + /* restart the tape if necessary */ + if (ft_runner_status == idle) { + TRACE(ft_t_noise, "runner is idle, restarting"); + if (ft_driver_state == deleting) { + TRACE_CATCH(ftape_start_writing(FT_WR_DELETE), + last_write_failed = 1); + } else { + TRACE_CATCH(ftape_start_writing(FT_WR_MULTI), + last_write_failed = 1); + } + } + TRACE(ft_t_noise, "tail: %d, head: %d", + ftape_buffer_id(ft_queue_tail), + ftape_buffer_id(ft_queue_head)); + TRACE_CATCH(fdc_interrupt_wait(5 * FT_SECOND), + last_write_failed = 1); + head = ftape_get_buffer(ft_queue_head); + if (head->status == error) { + /* Allow escape from loop when signaled ! + */ + FT_SIGNAL_EXIT(_DONT_BLOCK); + if (head->hard_error_map != 0) { + /* Implement hard write error recovery here + */ + } + /* retry this one */ + head->status = waiting; + if (ft_runner_status == aborting) { + ftape_dumb_stop(); + } + if (ft_runner_status != idle) { + TRACE_ABORT(-EIO, ft_t_err, + "unexpected state: " + "ft_runner_status != idle"); + } + ftape_start_writing(ft_driver_state == deleting + ? FT_WR_MULTI : FT_WR_DELETE); + } + TRACE(ft_t_noise, "looping until writes done"); + } + ftape_set_state(idle); + TRACE_EXIT 0; +} + +/* Write given segment from buffer at address to tape. + */ +static int write_segment(const int segment_id, + const void *address, + const ft_write_mode_t write_mode) +{ + int bytes_written = 0; + buffer_struct *tail; + buffer_state_enum wanted_state = (write_mode == FT_WR_DELETE + ? deleting : writing); + TRACE_FUN(ft_t_flow); + + TRACE(ft_t_noise, "segment_id = %d", segment_id); + if (ft_driver_state != wanted_state) { + if (ft_driver_state == deleting || + wanted_state == deleting) { + TRACE_CATCH(ftape_loop_until_writes_done(),); + } + TRACE(ft_t_noise, "calling ftape_abort_operation"); + TRACE_CATCH(ftape_abort_operation(),); + ftape_zap_write_buffers(); + ftape_set_state(wanted_state); + } + /* if all buffers full we'll have to wait... + */ + ftape_wait_segment(wanted_state); + tail = ftape_get_buffer(ft_queue_tail); + switch(tail->status) { + case done: + ft_history.defects += count_ones(tail->hard_error_map); + break; + case waiting: + /* this could happen with multiple EMPTY_SEGMENTs, but + * shouldn't happen any more as we re-start the runner even + * with an empty segment. + */ + bytes_written = -EAGAIN; + break; + case error: + /* setup for a retry + */ + tail->status = waiting; + bytes_written = -EAGAIN; /* force retry */ + if (tail->hard_error_map != 0) { + TRACE(ft_t_warn, + "warning: %d hard error(s) in written segment", + count_ones(tail->hard_error_map)); + TRACE(ft_t_noise, "hard_error_map = 0x%08lx", + (long)tail->hard_error_map); + /* Implement hard write error recovery here + */ + } + break; + default: + TRACE_ABORT(-EIO, ft_t_err, + "wait for empty segment failed, tail status: %d", + tail->status); + } + /* should runner stop ? + */ + if (ft_runner_status == aborting) { + buffer_struct *head = ftape_get_buffer(ft_queue_head); + if (head->status == wanted_state) { + head->status = done; /* ???? */ + } + /* don't call abort_operation(), we don't want to zap + * the dma buffers + */ + TRACE_CATCH(ftape_dumb_stop(),); + } else { + /* If just passed last segment on tape: wait for BOT + * or EOT mark. Sets ft_runner_status to idle if at lEOT + * and successful + */ + TRACE_CATCH(ftape_handle_logical_eot(),); + } + if (tail->status == done) { + /* now at least one buffer is empty, fill it with our + * data. skip bad sectors and generate ecc. + * copy_and_gen_ecc return nr of bytes written, range + * 0..29 Kb inclusive! + * + * Empty segments are handled inside coyp_and_gen_ecc() + */ + if (write_mode != FT_WR_DELETE) { + TRACE_CATCH(bytes_written = copy_and_gen_ecc( + tail->address, address, + ftape_get_bad_sector_entry(segment_id)),); + } + tail->segment_id = segment_id; + tail->status = waiting; + tail = ftape_next_buffer(ft_queue_tail); + } + /* Start tape only if all buffers full or flush mode. + * This will give higher probability of streaming. + */ + if (ft_runner_status != running && + ((tail->status == waiting && + ftape_get_buffer(ft_queue_head) == tail) || + write_mode != FT_WR_ASYNC)) { + TRACE_CATCH(ftape_start_writing(write_mode),); + } + TRACE_EXIT bytes_written; +} + +/* Write as much as fits from buffer to the given segment on tape + * and handle retries. + * Return the number of bytes written (>= 0), or: + * -EIO write failed + * -EINTR interrupted by signal + * -ENOSPC device full + */ +int ftape_write_segment(const int segment_id, + const void *buffer, + const ft_write_mode_t flush) +{ + int retry = 0; + int result; + TRACE_FUN(ft_t_flow); + + ft_history.used |= 2; + if (segment_id >= ft_tracks_per_tape*ft_segments_per_track) { + /* tape full */ + TRACE_ABORT(-ENOSPC, ft_t_err, + "invalid segment id: %d (max %d)", + segment_id, + ft_tracks_per_tape * ft_segments_per_track -1); + } + for (;;) { + if ((result = write_segment(segment_id, buffer, flush)) >= 0) { + if (result == 0) { /* empty segment */ + TRACE(ft_t_noise, + "empty segment, nothing written"); + } + TRACE_EXIT result; + } + if (result == -EAGAIN) { + if (++retry > 100) { /* give up */ + TRACE_ABORT(-EIO, ft_t_err, + "write failed, >100 retries in segment"); + } + TRACE(ft_t_warn, "write error, retry %d (%d)", + retry, + ftape_get_buffer(ft_queue_tail)->segment_id); + } else { + TRACE_ABORT(result, ft_t_err, + "write_segment failed, error: %d", result); + } + /* Allow escape from loop when signaled ! + */ + FT_SIGNAL_EXIT(_DONT_BLOCK); + } +} diff --git a/drivers/char/ftape/lowlevel/ftape-write.h b/drivers/char/ftape/lowlevel/ftape-write.h new file mode 100644 index 000000000000..0e7f898b7af9 --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape-write.h @@ -0,0 +1,53 @@ +#ifndef _FTAPE_WRITE_H +#define _FTAPE_WRITE_H + +/* + * Copyright (C) 1994-1995 Bas Laarhoven, + * (C) 1996-1997 Claus-Justus Heine. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape-write.h,v $ + $Author: claus $ + * + $Revision: 1.2 $ + $Date: 1997/10/05 19:18:30 $ + $State: Exp $ + * + * This file contains the definitions for the write functions + * for the QIC-117 floppy-tape driver for Linux. + * + */ + + +/* ftape-write.c defined global functions. + */ +typedef enum { + FT_WR_ASYNC = 0, /* start tape only when all buffers are full */ + FT_WR_MULTI = 1, /* start tape, but don't necessarily stop */ + FT_WR_SINGLE = 2, /* write a single segment and stop afterwards */ + FT_WR_DELETE = 3 /* write deleted data marks */ +} ft_write_mode_t; + +extern int ftape_start_writing(const ft_write_mode_t mode); +extern int ftape_write_segment(const int segment, + const void *address, + const ft_write_mode_t flushing); +extern void ftape_zap_write_buffers(void); +extern int ftape_loop_until_writes_done(void); + +#endif /* _FTAPE_WRITE_H */ + diff --git a/drivers/char/ftape/lowlevel/ftape_syms.c b/drivers/char/ftape/lowlevel/ftape_syms.c new file mode 100644 index 000000000000..5dc3a380c9bf --- /dev/null +++ b/drivers/char/ftape/lowlevel/ftape_syms.c @@ -0,0 +1,88 @@ +/* + * Copyright (C) 1996-1997 Claus-Justus Heine + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2, or (at your option) + any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; see the file COPYING. If not, write to + the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + + * + * $Source: /homes/cvs/ftape-stacked/ftape/lowlevel/ftape_syms.c,v $ + * $Revision: 1.4 $ + * $Date: 1997/10/17 00:03:51 $ + * + * This file contains the symbols that the ftape low level + * part of the QIC-40/80/3010/3020 floppy-tape driver "ftape" + * exports to its high level clients + */ + +#include <linux/config.h> +#include <linux/module.h> + +#include <linux/ftape.h> +#include "../lowlevel/ftape-tracing.h" +#include "../lowlevel/ftape-init.h" +#include "../lowlevel/fdc-io.h" +#include "../lowlevel/ftape-read.h" +#include "../lowlevel/ftape-write.h" +#include "../lowlevel/ftape-io.h" +#include "../lowlevel/ftape-ctl.h" +#include "../lowlevel/ftape-rw.h" +#include "../lowlevel/ftape-bsm.h" +#include "../lowlevel/ftape-buffer.h" +#include "../lowlevel/ftape-format.h" + +/* bad sector handling from ftape-bsm.c */ +EXPORT_SYMBOL(ftape_get_bad_sector_entry); +EXPORT_SYMBOL(ftape_find_end_of_bsm_list); +/* from ftape-rw.c */ +EXPORT_SYMBOL(ftape_set_state); +/* from ftape-ctl.c */ +EXPORT_SYMBOL(ftape_seek_to_bot); +EXPORT_SYMBOL(ftape_seek_to_eot); +EXPORT_SYMBOL(ftape_abort_operation); +EXPORT_SYMBOL(ftape_get_status); +EXPORT_SYMBOL(ftape_enable); +EXPORT_SYMBOL(ftape_disable); +EXPORT_SYMBOL(ftape_mmap); +EXPORT_SYMBOL(ftape_calibrate_data_rate); +/* from ftape-io.c */ +EXPORT_SYMBOL(ftape_reset_drive); +EXPORT_SYMBOL(ftape_command); +EXPORT_SYMBOL(ftape_parameter); +EXPORT_SYMBOL(ftape_ready_wait); +EXPORT_SYMBOL(ftape_report_operation); +EXPORT_SYMBOL(ftape_report_error); +/* from ftape-read.c */ +EXPORT_SYMBOL(ftape_read_segment_fraction); +EXPORT_SYMBOL(ftape_zap_read_buffers); +EXPORT_SYMBOL(ftape_read_header_segment); +EXPORT_SYMBOL(ftape_decode_header_segment); +/* from ftape-write.c */ +EXPORT_SYMBOL(ftape_write_segment); +EXPORT_SYMBOL(ftape_start_writing); +EXPORT_SYMBOL(ftape_loop_until_writes_done); +/* from ftape-buffer.h */ +EXPORT_SYMBOL(ftape_set_nr_buffers); +/* from ftape-format.h */ +EXPORT_SYMBOL(ftape_format_track); +EXPORT_SYMBOL(ftape_format_status); +EXPORT_SYMBOL(ftape_verify_segment); +/* from tracing.c */ +#ifndef CONFIG_FT_NO_TRACE_AT_ALL +EXPORT_SYMBOL(ftape_tracing); +EXPORT_SYMBOL(ftape_function_nest_level); +EXPORT_SYMBOL(ftape_trace_call); +EXPORT_SYMBOL(ftape_trace_exit); +EXPORT_SYMBOL(ftape_trace_log); +#endif + |