diff options
Diffstat (limited to 'drivers/char/ipmi')
| -rw-r--r-- | drivers/char/ipmi/Makefile | 4 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_bt_sm.c | 153 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_kcs_sm.c | 153 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_msghandler.c | 1508 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_poweroff.c | 206 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 698 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_sm.h | 89 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_smic_sm.c | 149 | ||||
| -rw-r--r-- | drivers/char/ipmi/ipmi_watchdog.c | 244 |
9 files changed, 1766 insertions, 1438 deletions
diff --git a/drivers/char/ipmi/Makefile b/drivers/char/ipmi/Makefile index 553f0a408eda..eb8a1a8c188e 100644 --- a/drivers/char/ipmi/Makefile +++ b/drivers/char/ipmi/Makefile @@ -9,7 +9,3 @@ obj-$(CONFIG_IPMI_DEVICE_INTERFACE) += ipmi_devintf.o obj-$(CONFIG_IPMI_SI) += ipmi_si.o obj-$(CONFIG_IPMI_WATCHDOG) += ipmi_watchdog.o obj-$(CONFIG_IPMI_POWEROFF) += ipmi_poweroff.o - -ipmi_si.o: $(ipmi_si-objs) - $(LD) -r -o $@ $(ipmi_si-objs) - diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index e736119b6497..7b98c067190a 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -37,26 +37,32 @@ #define BT_DEBUG_ENABLE 1 /* Generic messages */ #define BT_DEBUG_MSG 2 /* Prints all request/response buffers */ #define BT_DEBUG_STATES 4 /* Verbose look at state changes */ -/* BT_DEBUG_OFF must be zero to correspond to the default uninitialized - value */ +/* + * BT_DEBUG_OFF must be zero to correspond to the default uninitialized + * value + */ static int bt_debug; /* 0 == BT_DEBUG_OFF */ module_param(bt_debug, int, 0644); MODULE_PARM_DESC(bt_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); -/* Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds, - and 64 byte buffers. However, one HP implementation wants 255 bytes of - buffer (with a documented message of 160 bytes) so go for the max. - Since the Open IPMI architecture is single-message oriented at this - stage, the queue depth of BT is of no concern. */ +/* + * Typical "Get BT Capabilities" values are 2-3 retries, 5-10 seconds, + * and 64 byte buffers. However, one HP implementation wants 255 bytes of + * buffer (with a documented message of 160 bytes) so go for the max. + * Since the Open IPMI architecture is single-message oriented at this + * stage, the queue depth of BT is of no concern. + */ #define BT_NORMAL_TIMEOUT 5 /* seconds */ #define BT_NORMAL_RETRY_LIMIT 2 #define BT_RESET_DELAY 6 /* seconds after warm reset */ -/* States are written in chronological order and usually cover - multiple rows of the state table discussion in the IPMI spec. */ +/* + * States are written in chronological order and usually cover + * multiple rows of the state table discussion in the IPMI spec. + */ enum bt_states { BT_STATE_IDLE = 0, /* Order is critical in this list */ @@ -76,10 +82,12 @@ enum bt_states { BT_STATE_LONG_BUSY /* BT doesn't get hosed :-) */ }; -/* Macros seen at the end of state "case" blocks. They help with legibility - and debugging. */ +/* + * Macros seen at the end of state "case" blocks. They help with legibility + * and debugging. + */ -#define BT_STATE_CHANGE(X,Y) { bt->state = X; return Y; } +#define BT_STATE_CHANGE(X, Y) { bt->state = X; return Y; } #define BT_SI_SM_RETURN(Y) { last_printed = BT_STATE_PRINTME; return Y; } @@ -110,11 +118,13 @@ struct si_sm_data { #define BT_H_BUSY 0x40 #define BT_B_BUSY 0x80 -/* Some bits are toggled on each write: write once to set it, once - more to clear it; writing a zero does nothing. To absolutely - clear it, check its state and write if set. This avoids the "get - current then use as mask" scheme to modify one bit. Note that the - variable "bt" is hardcoded into these macros. */ +/* + * Some bits are toggled on each write: write once to set it, once + * more to clear it; writing a zero does nothing. To absolutely + * clear it, check its state and write if set. This avoids the "get + * current then use as mask" scheme to modify one bit. Note that the + * variable "bt" is hardcoded into these macros. + */ #define BT_STATUS bt->io->inputb(bt->io, 0) #define BT_CONTROL(x) bt->io->outputb(bt->io, 0, x) @@ -125,8 +135,10 @@ struct si_sm_data { #define BT_INTMASK_R bt->io->inputb(bt->io, 2) #define BT_INTMASK_W(x) bt->io->outputb(bt->io, 2, x) -/* Convenience routines for debugging. These are not multi-open safe! - Note the macros have hardcoded variables in them. */ +/* + * Convenience routines for debugging. These are not multi-open safe! + * Note the macros have hardcoded variables in them. + */ static char *state2txt(unsigned char state) { @@ -182,7 +194,8 @@ static char *status2txt(unsigned char status) static unsigned int bt_init_data(struct si_sm_data *bt, struct si_sm_io *io) { memset(bt, 0, sizeof(struct si_sm_data)); - if (bt->io != io) { /* external: one-time only things */ + if (bt->io != io) { + /* external: one-time only things */ bt->io = io; bt->seq = 0; } @@ -229,7 +242,7 @@ static int bt_start_transaction(struct si_sm_data *bt, printk(KERN_WARNING "BT: +++++++++++++++++ New command\n"); printk(KERN_WARNING "BT: NetFn/LUN CMD [%d data]:", size - 2); for (i = 0; i < size; i ++) - printk (" %02x", data[i]); + printk(" %02x", data[i]); printk("\n"); } bt->write_data[0] = size + 1; /* all data plus seq byte */ @@ -246,8 +259,10 @@ static int bt_start_transaction(struct si_sm_data *bt, return 0; } -/* After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE - it calls this. Strip out the length and seq bytes. */ +/* + * After the upper state machine has been told SI_SM_TRANSACTION_COMPLETE + * it calls this. Strip out the length and seq bytes. + */ static int bt_get_result(struct si_sm_data *bt, unsigned char *data, @@ -269,10 +284,10 @@ static int bt_get_result(struct si_sm_data *bt, memcpy(data + 2, bt->read_data + 4, msg_len - 2); if (bt_debug & BT_DEBUG_MSG) { - printk (KERN_WARNING "BT: result %d bytes:", msg_len); + printk(KERN_WARNING "BT: result %d bytes:", msg_len); for (i = 0; i < msg_len; i++) printk(" %02x", data[i]); - printk ("\n"); + printk("\n"); } return msg_len; } @@ -292,8 +307,10 @@ static void reset_flags(struct si_sm_data *bt) BT_INTMASK_W(BT_BMC_HWRST); } -/* Get rid of an unwanted/stale response. This should only be needed for - BMCs that support multiple outstanding requests. */ +/* + * Get rid of an unwanted/stale response. This should only be needed for + * BMCs that support multiple outstanding requests. + */ static void drain_BMC2HOST(struct si_sm_data *bt) { @@ -326,8 +343,8 @@ static inline void write_all_bytes(struct si_sm_data *bt) printk(KERN_WARNING "BT: write %d bytes seq=0x%02X", bt->write_count, bt->seq); for (i = 0; i < bt->write_count; i++) - printk (" %02x", bt->write_data[i]); - printk ("\n"); + printk(" %02x", bt->write_data[i]); + printk("\n"); } for (i = 0; i < bt->write_count; i++) HOST2BMC(bt->write_data[i]); @@ -337,8 +354,10 @@ static inline int read_all_bytes(struct si_sm_data *bt) { unsigned char i; - /* length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode. - Keep layout of first four bytes aligned with write_data[] */ + /* + * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode. + * Keep layout of first four bytes aligned with write_data[] + */ bt->read_data[0] = BMC2HOST; bt->read_count = bt->read_data[0]; @@ -362,8 +381,8 @@ static inline int read_all_bytes(struct si_sm_data *bt) if (max > 16) max = 16; for (i = 0; i < max; i++) - printk (" %02x", bt->read_data[i]); - printk ("%s\n", bt->read_count == max ? "" : " ..."); + printk(KERN_CONT " %02x", bt->read_data[i]); + printk(KERN_CONT "%s\n", bt->read_count == max ? "" : " ..."); } /* per the spec, the (NetFn[1], Seq[2], Cmd[3]) tuples must match */ @@ -402,8 +421,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt, printk(KERN_WARNING "IPMI BT: %s in %s %s ", /* open-ended line */ reason, STATE2TXT, STATUS2TXT); - /* Per the IPMI spec, retries are based on the sequence number - known only to this module, so manage a restart here. */ + /* + * Per the IPMI spec, retries are based on the sequence number + * known only to this module, so manage a restart here. + */ (bt->error_retries)++; if (bt->error_retries < bt->BT_CAP_retries) { printk("%d retries left\n", @@ -412,8 +433,8 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt, return SI_SM_CALL_WITHOUT_DELAY; } - printk("failed %d retries, sending error response\n", - bt->BT_CAP_retries); + printk(KERN_WARNING "failed %d retries, sending error response\n", + bt->BT_CAP_retries); if (!bt->nonzero_status) printk(KERN_ERR "IPMI BT: stuck, try power cycle\n"); @@ -424,8 +445,10 @@ static enum si_sm_result error_recovery(struct si_sm_data *bt, return SI_SM_CALL_WITHOUT_DELAY; } - /* Concoct a useful error message, set up the next state, and - be done with this sequence. */ + /* + * Concoct a useful error message, set up the next state, and + * be done with this sequence. + */ bt->state = BT_STATE_IDLE; switch (cCode) { @@ -461,10 +484,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) last_printed = bt->state; } - /* Commands that time out may still (eventually) provide a response. - This stale response will get in the way of a new response so remove - it if possible (hopefully during IDLE). Even if it comes up later - it will be rejected by its (now-forgotten) seq number. */ + /* + * Commands that time out may still (eventually) provide a response. + * This stale response will get in the way of a new response so remove + * it if possible (hopefully during IDLE). Even if it comes up later + * it will be rejected by its (now-forgotten) seq number. + */ if ((bt->state < BT_STATE_WRITE_BYTES) && (status & BT_B2H_ATN)) { drain_BMC2HOST(bt); @@ -472,7 +497,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) } if ((bt->state != BT_STATE_IDLE) && - (bt->state < BT_STATE_PRINTME)) { /* check timeout */ + (bt->state < BT_STATE_PRINTME)) { + /* check timeout */ bt->timeout -= time; if ((bt->timeout < 0) && (bt->state < BT_STATE_RESET1)) return error_recovery(bt, @@ -482,8 +508,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) switch (bt->state) { - /* Idle state first checks for asynchronous messages from another - channel, then does some opportunistic housekeeping. */ + /* + * Idle state first checks for asynchronous messages from another + * channel, then does some opportunistic housekeeping. + */ case BT_STATE_IDLE: if (status & BT_SMS_ATN) { @@ -531,16 +559,19 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); BT_CONTROL(BT_H_BUSY); /* set */ - /* Uncached, ordered writes should just proceeed serially but - some BMCs don't clear B2H_ATN with one hit. Fast-path a - workaround without too much penalty to the general case. */ + /* + * Uncached, ordered writes should just proceeed serially but + * some BMCs don't clear B2H_ATN with one hit. Fast-path a + * workaround without too much penalty to the general case. + */ BT_CONTROL(BT_B2H_ATN); /* clear it to ACK the BMC */ BT_STATE_CHANGE(BT_STATE_CLEAR_B2H, SI_SM_CALL_WITHOUT_DELAY); case BT_STATE_CLEAR_B2H: - if (status & BT_B2H_ATN) { /* keep hitting it */ + if (status & BT_B2H_ATN) { + /* keep hitting it */ BT_CONTROL(BT_B2H_ATN); BT_SI_SM_RETURN(SI_SM_CALL_WITH_DELAY); } @@ -548,7 +579,8 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) SI_SM_CALL_WITHOUT_DELAY); case BT_STATE_READ_BYTES: - if (!(status & BT_H_BUSY)) /* check in case of retry */ + if (!(status & BT_H_BUSY)) + /* check in case of retry */ BT_CONTROL(BT_H_BUSY); BT_CONTROL(BT_CLR_RD_PTR); /* start of BMC2HOST buffer */ i = read_all_bytes(bt); /* true == packet seq match */ @@ -599,8 +631,10 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) BT_STATE_CHANGE(BT_STATE_XACTION_START, SI_SM_CALL_WITH_DELAY); - /* Get BT Capabilities, using timing of upper level state machine. - Set outreqs to prevent infinite loop on timeout. */ + /* + * Get BT Capabilities, using timing of upper level state machine. + * Set outreqs to prevent infinite loop on timeout. + */ case BT_STATE_CAPABILITIES_BEGIN: bt->BT_CAP_outreqs = 1; { @@ -638,10 +672,12 @@ static enum si_sm_result bt_event(struct si_sm_data *bt, long time) static int bt_detect(struct si_sm_data *bt) { - /* It's impossible for the BT status and interrupt registers to be - all 1's, (assuming a properly functioning, self-initialized BMC) - but that's what you get from reading a bogus address, so we - test that first. The calling routine uses negative logic. */ + /* + * It's impossible for the BT status and interrupt registers to be + * all 1's, (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. The calling routine uses negative logic. + */ if ((BT_STATUS == 0xFF) && (BT_INTMASK_R == 0xFF)) return 1; @@ -658,8 +694,7 @@ static int bt_size(void) return sizeof(struct si_sm_data); } -struct si_sm_handlers bt_smi_handlers = -{ +struct si_sm_handlers bt_smi_handlers = { .init_data = bt_init_data, .start_transaction = bt_start_transaction, .get_result = bt_get_result, diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c index c1b8228cb7b6..80704875794c 100644 --- a/drivers/char/ipmi/ipmi_kcs_sm.c +++ b/drivers/char/ipmi/ipmi_kcs_sm.c @@ -60,37 +60,58 @@ MODULE_PARM_DESC(kcs_debug, "debug bitmask, 1=enable, 2=messages, 4=states"); /* The states the KCS driver may be in. */ enum kcs_states { - KCS_IDLE, /* The KCS interface is currently - doing nothing. */ - KCS_START_OP, /* We are starting an operation. The - data is in the output buffer, but - nothing has been done to the - interface yet. This was added to - the state machine in the spec to - wait for the initial IBF. */ - KCS_WAIT_WRITE_START, /* We have written a write cmd to the - interface. */ - KCS_WAIT_WRITE, /* We are writing bytes to the - interface. */ - KCS_WAIT_WRITE_END, /* We have written the write end cmd - to the interface, and still need to - write the last byte. */ - KCS_WAIT_READ, /* We are waiting to read data from - the interface. */ - KCS_ERROR0, /* State to transition to the error - handler, this was added to the - state machine in the spec to be - sure IBF was there. */ - KCS_ERROR1, /* First stage error handler, wait for - the interface to respond. */ - KCS_ERROR2, /* The abort cmd has been written, - wait for the interface to - respond. */ - KCS_ERROR3, /* We wrote some data to the - interface, wait for it to switch to - read mode. */ - KCS_HOSED /* The hardware failed to follow the - state machine. */ + /* The KCS interface is currently doing nothing. */ + KCS_IDLE, + + /* + * We are starting an operation. The data is in the output + * buffer, but nothing has been done to the interface yet. This + * was added to the state machine in the spec to wait for the + * initial IBF. + */ + KCS_START_OP, + + /* We have written a write cmd to the interface. */ + KCS_WAIT_WRITE_START, + + /* We are writing bytes to the interface. */ + KCS_WAIT_WRITE, + + /* + * We have written the write end cmd to the interface, and + * still need to write the last byte. + */ + KCS_WAIT_WRITE_END, + + /* We are waiting to read data from the interface. */ + KCS_WAIT_READ, + + /* + * State to transition to the error handler, this was added to + * the state machine in the spec to be sure IBF was there. + */ + KCS_ERROR0, + + /* + * First stage error handler, wait for the interface to + * respond. + */ + KCS_ERROR1, + + /* + * The abort cmd has been written, wait for the interface to + * respond. + */ + KCS_ERROR2, + + /* + * We wrote some data to the interface, wait for it to switch + * to read mode. + */ + KCS_ERROR3, + + /* The hardware failed to follow the state machine. */ + KCS_HOSED }; #define MAX_KCS_READ_SIZE IPMI_MAX_MSG_LENGTH @@ -102,8 +123,7 @@ enum kcs_states { #define MAX_ERROR_RETRIES 10 #define ERROR0_OBF_WAIT_JIFFIES (2*HZ) -struct si_sm_data -{ +struct si_sm_data { enum kcs_states state; struct si_sm_io *io; unsigned char write_data[MAX_KCS_WRITE_SIZE]; @@ -187,7 +207,8 @@ static inline void start_error_recovery(struct si_sm_data *kcs, char *reason) (kcs->error_retries)++; if (kcs->error_retries > MAX_ERROR_RETRIES) { if (kcs_debug & KCS_DEBUG_ENABLE) - printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", reason); + printk(KERN_DEBUG "ipmi_kcs_sm: kcs hosed: %s\n", + reason); kcs->state = KCS_HOSED; } else { kcs->error0_timeout = jiffies + ERROR0_OBF_WAIT_JIFFIES; @@ -271,10 +292,9 @@ static int start_kcs_transaction(struct si_sm_data *kcs, unsigned char *data, if (kcs_debug & KCS_DEBUG_MSG) { printk(KERN_DEBUG "start_kcs_transaction -"); - for (i = 0; i < size; i ++) { + for (i = 0; i < size; i++) printk(" %02x", (unsigned char) (data [i])); - } - printk ("\n"); + printk("\n"); } kcs->error_retries = 0; memcpy(kcs->write_data, data, size); @@ -305,9 +325,11 @@ static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data, kcs->read_pos = 3; } if (kcs->truncated) { - /* Report a truncated error. We might overwrite - another error, but that's too bad, the user needs - to know it was truncated. */ + /* + * Report a truncated error. We might overwrite + * another error, but that's too bad, the user needs + * to know it was truncated. + */ data[2] = IPMI_ERR_MSG_TRUNCATED; kcs->truncated = 0; } @@ -315,9 +337,11 @@ static int get_kcs_result(struct si_sm_data *kcs, unsigned char *data, return kcs->read_pos; } -/* This implements the state machine defined in the IPMI manual, see - that for details on how this works. Divide that flowchart into - sections delimited by "Wait for IBF" and this will become clear. */ +/* + * This implements the state machine defined in the IPMI manual, see + * that for details on how this works. Divide that flowchart into + * sections delimited by "Wait for IBF" and this will become clear. + */ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) { unsigned char status; @@ -388,11 +412,12 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) write_next_byte(kcs); } break; - + case KCS_WAIT_WRITE_END: if (state != KCS_WRITE_STATE) { start_error_recovery(kcs, - "Not in write state for write end"); + "Not in write state" + " for write end"); break; } clear_obf(kcs, status); @@ -413,13 +438,15 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) return SI_SM_CALL_WITH_DELAY; read_next_byte(kcs); } else { - /* We don't implement this exactly like the state - machine in the spec. Some broken hardware - does not write the final dummy byte to the - read register. Thus obf will never go high - here. We just go straight to idle, and we - handle clearing out obf in idle state if it - happens to come in. */ + /* + * We don't implement this exactly like the state + * machine in the spec. Some broken hardware + * does not write the final dummy byte to the + * read register. Thus obf will never go high + * here. We just go straight to idle, and we + * handle clearing out obf in idle state if it + * happens to come in. + */ clear_obf(kcs, status); kcs->orig_write_count = 0; kcs->state = KCS_IDLE; @@ -430,7 +457,8 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) case KCS_ERROR0: clear_obf(kcs, status); status = read_status(kcs); - if (GET_STATUS_OBF(status)) /* controller isn't responding */ + if (GET_STATUS_OBF(status)) + /* controller isn't responding */ if (time_before(jiffies, kcs->error0_timeout)) return SI_SM_CALL_WITH_TICK_DELAY; write_cmd(kcs, KCS_GET_STATUS_ABORT); @@ -442,7 +470,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) write_data(kcs, 0); kcs->state = KCS_ERROR2; break; - + case KCS_ERROR2: if (state != KCS_READ_STATE) { start_error_recovery(kcs, @@ -456,7 +484,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) write_data(kcs, KCS_READ_BYTE); kcs->state = KCS_ERROR3; break; - + case KCS_ERROR3: if (state != KCS_IDLE_STATE) { start_error_recovery(kcs, @@ -475,7 +503,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) return SI_SM_TRANSACTION_COMPLETE; } break; - + case KCS_HOSED: break; } @@ -495,10 +523,12 @@ static int kcs_size(void) static int kcs_detect(struct si_sm_data *kcs) { - /* It's impossible for the KCS status register to be all 1's, - (assuming a properly functioning, self-initialized BMC) - but that's what you get from reading a bogus address, so we - test that first. */ + /* + * It's impossible for the KCS status register to be all 1's, + * (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. + */ if (read_status(kcs) == 0xff) return 1; @@ -509,8 +539,7 @@ static void kcs_cleanup(struct si_sm_data *kcs) { } -struct si_sm_handlers kcs_smi_handlers = -{ +struct si_sm_handlers kcs_smi_handlers = { .init_data = init_kcs_data, .start_transaction = start_kcs_transaction, .get_result = get_kcs_result, diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 32b2b22996dc..8a59aaa21be5 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -47,7 +47,7 @@ #define PFX "IPMI message handler: " -#define IPMI_DRIVER_VERSION "39.1" +#define IPMI_DRIVER_VERSION "39.2" static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); static int ipmi_init_msghandler(void); @@ -63,16 +63,16 @@ static struct proc_dir_entry *proc_ipmi_root; #define MAX_EVENTS_IN_QUEUE 25 -/* Don't let a message sit in a queue forever, always time it with at lest - the max message timer. This is in milliseconds. */ +/* + * Don't let a message sit in a queue forever, always time it with at lest + * the max message timer. This is in milliseconds. + */ #define MAX_MSG_TIMEOUT 60000 - /* * The main "user" data structure. */ -struct ipmi_user -{ +struct ipmi_user { struct list_head link; /* Set to "0" when the user is destroyed. */ @@ -91,8 +91,7 @@ struct ipmi_user int gets_events; }; -struct cmd_rcvr -{ +struct cmd_rcvr { struct list_head link; ipmi_user_t user; @@ -106,12 +105,12 @@ struct cmd_rcvr * or change any data until the RCU period completes. So we * use this next variable during mass deletion so we can have * a list and don't have to wait and restart the search on - * every individual deletion of a command. */ + * every individual deletion of a command. + */ struct cmd_rcvr *next; }; -struct seq_table -{ +struct seq_table { unsigned int inuse : 1; unsigned int broadcast : 1; @@ -119,53 +118,60 @@ struct seq_table unsigned long orig_timeout; unsigned int retries_left; - /* To verify on an incoming send message response that this is - the message that the response is for, we keep a sequence id - and increment it every time we send a message. */ + /* + * To verify on an incoming send message response that this is + * the message that the response is for, we keep a sequence id + * and increment it every time we send a message. + */ long seqid; - /* This is held so we can properly respond to the message on a - timeout, and it is used to hold the temporary data for - retransmission, too. */ + /* + * This is held so we can properly respond to the message on a + * timeout, and it is used to hold the temporary data for + * retransmission, too. + */ struct ipmi_recv_msg *recv_msg; }; -/* Store the information in a msgid (long) to allow us to find a - sequence table entry from the msgid. */ +/* + * Store the information in a msgid (long) to allow us to find a + * sequence table entry from the msgid. + */ #define STORE_SEQ_IN_MSGID(seq, seqid) (((seq&0xff)<<26) | (seqid&0x3ffffff)) #define GET_SEQ_FROM_MSGID(msgid, seq, seqid) \ do { \ seq = ((msgid >> 26) & 0x3f); \ seqid = (msgid & 0x3fffff); \ - } while (0) + } while (0) #define NEXT_SEQID(seqid) (((seqid) + 1) & 0x3fffff) -struct ipmi_channel -{ +struct ipmi_channel { unsigned char medium; unsigned char protocol; - /* My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR, - but may be changed by the user. */ + /* + * My slave address. This is initialized to IPMI_BMC_SLAVE_ADDR, + * but may be changed by the user. + */ unsigned char address; - /* My LUN. This should generally stay the SMS LUN, but just in - case... */ + /* + * My LUN. This should generally stay the SMS LUN, but just in + * case... + */ unsigned char lun; }; #ifdef CONFIG_PROC_FS -struct ipmi_proc_entry -{ +struct ipmi_proc_entry { char *name; struct ipmi_proc_entry *next; }; #endif -struct bmc_device -{ +struct bmc_device { struct platform_device *dev; struct ipmi_device_id id; unsigned char guid[16]; @@ -186,10 +192,108 @@ struct bmc_device struct device_attribute aux_firmware_rev_attr; }; +/* + * Various statistics for IPMI, these index stats[] in the ipmi_smi + * structure. + */ +enum ipmi_stat_indexes { + /* Commands we got from the user that were invalid. */ + IPMI_STAT_sent_invalid_commands = 0, + + /* Commands we sent to the MC. */ + IPMI_STAT_sent_local_commands, + + /* Responses from the MC that were delivered to a user. */ + IPMI_STAT_handled_local_responses, + + /* Responses from the MC that were not delivered to a user. */ + IPMI_STAT_unhandled_local_responses, + + /* Commands we sent out to the IPMB bus. */ + IPMI_STAT_sent_ipmb_commands, + + /* Commands sent on the IPMB that had errors on the SEND CMD */ + IPMI_STAT_sent_ipmb_command_errs, + + /* Each retransmit increments this count. */ + IPMI_STAT_retransmitted_ipmb_commands, + + /* + * When a message times out (runs out of retransmits) this is + * incremented. + */ + IPMI_STAT_timed_out_ipmb_commands, + + /* + * This is like above, but for broadcasts. Broadcasts are + * *not* included in the above count (they are expected to + * time out). + */ + IPMI_STAT_timed_out_ipmb_broadcasts, + + /* Responses I have sent to the IPMB bus. */ + IPMI_STAT_sent_ipmb_responses, + + /* The response was delivered to the user. */ + IPMI_STAT_handled_ipmb_responses, + + /* The response had invalid data in it. */ + IPMI_STAT_invalid_ipmb_responses, + + /* The response didn't have anyone waiting for it. */ + IPMI_STAT_unhandled_ipmb_responses, + + /* Commands we sent out to the IPMB bus. */ + IPMI_STAT_sent_lan_commands, + + /* Commands sent on the IPMB that had errors on the SEND CMD */ + IPMI_STAT_sent_lan_command_errs, + + /* Each retransmit increments this count. */ + IPMI_STAT_retransmitted_lan_commands, + + /* + * When a message times out (runs out of retransmits) this is + * incremented. + */ + IPMI_STAT_timed_out_lan_commands, + + /* Responses I have sent to the IPMB bus. */ + IPMI_STAT_sent_lan_responses, + + /* The response was delivered to the user. */ + IPMI_STAT_handled_lan_responses, + + /* The response had invalid data in it. */ + IPMI_STAT_invalid_lan_responses, + + /* The response didn't have anyone waiting for it. */ + IPMI_STAT_unhandled_lan_responses, + + /* The command was delivered to the user. */ + IPMI_STAT_handled_commands, + + /* The command had invalid data in it. */ + IPMI_STAT_invalid_commands, + + /* The command didn't have anyone waiting for it. */ + IPMI_STAT_unhandled_commands, + + /* Invalid data in an event. */ + IPMI_STAT_invalid_events, + + /* Events that were received with the proper format. */ + IPMI_STAT_events, + + + /* This *must* remain last, add new values above this. */ + IPMI_NUM_STATS +}; + + #define IPMI_IPMB_NUM_SEQ 64 #define IPMI_MAX_CHANNELS 16 -struct ipmi_smi -{ +struct ipmi_smi { /* What interface number are we? */ int intf_num; @@ -198,8 +302,10 @@ struct ipmi_smi /* Used for a list of interfaces. */ struct list_head link; - /* The list of upper layers that are using me. seq_lock - * protects this. */ + /* + * The list of upper layers that are using me. seq_lock + * protects this. + */ struct list_head users; /* Information to supply to users. */ @@ -213,10 +319,12 @@ struct ipmi_smi char *my_dev_name; char *sysfs_name; - /* This is the lower-layer's sender routine. Note that you + /* + * This is the lower-layer's sender routine. Note that you * must either be holding the ipmi_interfaces_mutex or be in * an umpreemptible region to use this. You must fetch the - * value into a local variable and make sure it is not NULL. */ + * value into a local variable and make sure it is not NULL. + */ struct ipmi_smi_handlers *handlers; void *send_info; @@ -229,34 +337,45 @@ struct ipmi_smi /* Driver-model device for the system interface. */ struct device *si_dev; - /* A table of sequence numbers for this interface. We use the - sequence numbers for IPMB messages that go out of the - interface to match them up with their responses. A routine - is called periodically to time the items in this list. */ + /* + * A table of sequence numbers for this interface. We use the + * sequence numbers for IPMB messages that go out of the + * interface to match them up with their responses. A routine + * is called periodically to time the items in this list. + */ spinlock_t seq_lock; struct seq_table seq_table[IPMI_IPMB_NUM_SEQ]; int curr_seq; - /* Messages that were delayed for some reason (out of memory, - for instance), will go in here to be processed later in a - periodic timer interrupt. */ + /* + * Messages that were delayed for some reason (out of memory, + * for instance), will go in here to be processed later in a + * periodic timer interrupt. + */ spinlock_t waiting_msgs_lock; struct list_head waiting_msgs; - /* The list of command receivers that are registered for commands - on this interface. */ + /* + * The list of command receivers that are registered for commands + * on this interface. + */ struct mutex cmd_rcvrs_mutex; struct list_head cmd_rcvrs; - /* Events that were queues because no one was there to receive - them. */ + /* + * Events that were queues because no one was there to receive + * them. + */ spinlock_t events_lock; /* For dealing with event stuff. */ struct list_head waiting_events; unsigned int waiting_events_count; /* How many events in queue? */ - int delivering_events; + char delivering_events; + char event_msg_printed; - /* The event receiver for my BMC, only really used at panic - shutdown as a place to store this. */ + /* + * The event receiver for my BMC, only really used at panic + * shutdown as a place to store this. + */ unsigned char event_receiver; unsigned char event_receiver_lun; unsigned char local_sel_device; @@ -268,14 +387,18 @@ struct ipmi_smi int auto_maintenance_timeout; spinlock_t maintenance_mode_lock; /* Used in a timer... */ - /* A cheap hack, if this is non-null and a message to an - interface comes in with a NULL user, call this routine with - it. Note that the message will still be freed by the - caller. This only works on the system interface. */ + /* + * A cheap hack, if this is non-null and a message to an + * interface comes in with a NULL user, call this routine with + * it. Note that the message will still be freed by the + * caller. This only works on the system interface. + */ void (*null_user_handler)(ipmi_smi_t intf, struct ipmi_recv_msg *msg); - /* When we are scanning the channels for an SMI, this will - tell which channel we are scanning. */ + /* + * When we are scanning the channels for an SMI, this will + * tell which channel we are scanning. + */ int curr_channel; /* Channel information */ @@ -285,74 +408,14 @@ struct ipmi_smi struct proc_dir_entry *proc_dir; char proc_dir_name[10]; - spinlock_t counter_lock; /* For making counters atomic. */ - - /* Commands we got that were invalid. */ - unsigned int sent_invalid_commands; - - /* Commands we sent to the MC. */ - unsigned int sent_local_commands; - /* Responses from the MC that were delivered to a user. */ - unsigned int handled_local_responses; - /* Responses from the MC that were not delivered to a user. */ - unsigned int unhandled_local_responses; - - /* Commands we sent out to the IPMB bus. */ - unsigned int sent_ipmb_commands; - /* Commands sent on the IPMB that had errors on the SEND CMD */ - unsigned int sent_ipmb_command_errs; - /* Each retransmit increments this count. */ - unsigned int retransmitted_ipmb_commands; - /* When a message times out (runs out of retransmits) this is - incremented. */ - unsigned int timed_out_ipmb_commands; - - /* This is like above, but for broadcasts. Broadcasts are - *not* included in the above count (they are expected to - time out). */ - unsigned int timed_out_ipmb_broadcasts; + atomic_t stats[IPMI_NUM_STATS]; - /* Responses I have sent to the IPMB bus. */ - unsigned int sent_ipmb_responses; - - /* The response was delivered to the user. */ - unsigned int handled_ipmb_responses; - /* The response had invalid data in it. */ - unsigned int invalid_ipmb_responses; - /* The response didn't have anyone waiting for it. */ - unsigned int unhandled_ipmb_responses; - - /* Commands we sent out to the IPMB bus. */ - unsigned int sent_lan_commands; - /* Commands sent on the IPMB that had errors on the SEND CMD */ - unsigned int sent_lan_command_errs; - /* Each retransmit increments this count. */ - unsigned int retransmitted_lan_commands; - /* When a message times out (runs out of retransmits) this is - incremented. */ - unsigned int timed_out_lan_commands; - - /* Responses I have sent to the IPMB bus. */ - unsigned int sent_lan_responses; - - /* The response was delivered to the user. */ - unsigned int handled_lan_responses; - /* The response had invalid data in it. */ - unsigned int invalid_lan_responses; - /* The response didn't have anyone waiting for it. */ - unsigned int unhandled_lan_responses; - - /* The command was delivered to the user. */ - unsigned int handled_commands; - /* The command had invalid data in it. */ - unsigned int invalid_commands; - /* The command didn't have anyone waiting for it. */ - unsigned int unhandled_commands; - - /* Invalid data in an event. */ - unsigned int invalid_events; - /* Events that were received with the proper format. */ - unsigned int events; + /* + * run_to_completion duplicate of smb_info, smi_info + * and ipmi_serial_info structures. Used to decrease numbers of + * parameters passed by "low" level IPMI code. + */ + int run_to_completion; }; #define to_si_intf_from_dev(device) container_of(device, struct ipmi_smi, dev) @@ -368,12 +431,19 @@ static DEFINE_MUTEX(ipmidriver_mutex); static LIST_HEAD(ipmi_interfaces); static DEFINE_MUTEX(ipmi_interfaces_mutex); -/* List of watchers that want to know when smi's are added and - deleted. */ +/* + * List of watchers that want to know when smi's are added and deleted. + */ static LIST_HEAD(smi_watchers); static DEFINE_MUTEX(smi_watchers_mutex); +#define ipmi_inc_stat(intf, stat) \ + atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat]) +#define ipmi_get_stat(intf, stat) \ + ((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat])) + + static void free_recv_msg_list(struct list_head *q) { struct ipmi_recv_msg *msg, *msg2; @@ -417,10 +487,8 @@ static void clean_up_interface_data(ipmi_smi_t intf) for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { if ((intf->seq_table[i].inuse) - && (intf->seq_table[i].recv_msg)) - { + && (intf->seq_table[i].recv_msg)) ipmi_free_recv_msg(intf->seq_table[i].recv_msg); - } } } @@ -487,6 +555,7 @@ int ipmi_smi_watcher_register(struct ipmi_smi_watcher *watcher) } return -ENOMEM; } +EXPORT_SYMBOL(ipmi_smi_watcher_register); int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher) { @@ -495,6 +564,7 @@ int ipmi_smi_watcher_unregister(struct ipmi_smi_watcher *watcher) mutex_unlock(&smi_watchers_mutex); return 0; } +EXPORT_SYMBOL(ipmi_smi_watcher_unregister); /* * Must be called with smi_watchers_mutex held. @@ -530,8 +600,7 @@ ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) } if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE) - || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) - { + || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) { struct ipmi_ipmb_addr *ipmb_addr1 = (struct ipmi_ipmb_addr *) addr1; struct ipmi_ipmb_addr *ipmb_addr2 @@ -559,9 +628,8 @@ ipmi_addr_equal(struct ipmi_addr *addr1, struct ipmi_addr *addr2) int ipmi_validate_addr(struct ipmi_addr *addr, int len) { - if (len < sizeof(struct ipmi_system_interface_addr)) { + if (len < sizeof(struct ipmi_system_interface_addr)) return -EINVAL; - } if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { if (addr->channel != IPMI_BMC_CHANNEL) @@ -575,23 +643,21 @@ int ipmi_validate_addr(struct ipmi_addr *addr, int len) return -EINVAL; if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) - || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) - { - if (len < sizeof(struct ipmi_ipmb_addr)) { + || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) { + if (len < sizeof(struct ipmi_ipmb_addr)) return -EINVAL; - } return 0; } if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { - if (len < sizeof(struct ipmi_lan_addr)) { + if (len < sizeof(struct ipmi_lan_addr)) return -EINVAL; - } return 0; } return -EINVAL; } +EXPORT_SYMBOL(ipmi_validate_addr); unsigned int ipmi_addr_length(int addr_type) { @@ -599,34 +665,28 @@ unsigned int ipmi_addr_length(int addr_type) return sizeof(struct ipmi_system_interface_addr); if ((addr_type == IPMI_IPMB_ADDR_TYPE) - || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) - { + || (addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) return sizeof(struct ipmi_ipmb_addr); - } if (addr_type == IPMI_LAN_ADDR_TYPE) return sizeof(struct ipmi_lan_addr); return 0; } +EXPORT_SYMBOL(ipmi_addr_length); static void deliver_response(struct ipmi_recv_msg *msg) { if (!msg->user) { ipmi_smi_t intf = msg->user_msg_data; - unsigned long flags; /* Special handling for NULL users. */ if (intf->null_user_handler) { intf->null_user_handler(intf, msg); - spin_lock_irqsave(&intf->counter_lock, flags); - intf->handled_local_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, handled_local_responses); } else { /* No handler, so give up. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->unhandled_local_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, unhandled_local_responses); } ipmi_free_recv_msg(msg); } else { @@ -646,9 +706,11 @@ deliver_err_response(struct ipmi_recv_msg *msg, int err) deliver_response(msg); } -/* Find the next sequence number not being used and add the given - message with the given timeout to the sequence table. This must be - called with the interface's seq_lock held. */ +/* + * Find the next sequence number not being used and add the given + * message with the given timeout to the sequence table. This must be + * called with the interface's seq_lock held. + */ static int intf_next_seq(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, unsigned long timeout, @@ -660,10 +722,8 @@ static int intf_next_seq(ipmi_smi_t intf, int rv = 0; unsigned int i; - for (i = intf->curr_seq; - (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq; - i = (i+1)%IPMI_IPMB_NUM_SEQ) - { + for (i = intf->curr_seq; (i+1)%IPMI_IPMB_NUM_SEQ != intf->curr_seq; + i = (i+1)%IPMI_IPMB_NUM_SEQ) { if (!intf->seq_table[i].inuse) break; } @@ -671,8 +731,10 @@ static int intf_next_seq(ipmi_smi_t intf, if (!intf->seq_table[i].inuse) { intf->seq_table[i].recv_msg = recv_msg; - /* Start with the maximum timeout, when the send response - comes in we will start the real timer. */ + /* + * Start with the maximum timeout, when the send response + * comes in we will start the real timer. + */ intf->seq_table[i].timeout = MAX_MSG_TIMEOUT; intf->seq_table[i].orig_timeout = timeout; intf->seq_table[i].retries_left = retries; @@ -685,15 +747,17 @@ static int intf_next_seq(ipmi_smi_t intf, } else { rv = -EAGAIN; } - + return rv; } -/* Return the receive message for the given sequence number and - release the sequence number so it can be reused. Some other data - is passed in to be sure the message matches up correctly (to help - guard against message coming in after their timeout and the - sequence number being reused). */ +/* + * Return the receive message for the given sequence number and + * release the sequence number so it can be reused. Some other data + * is passed in to be sure the message matches up correctly (to help + * guard against message coming in after their timeout and the + * sequence number being reused). + */ static int intf_find_seq(ipmi_smi_t intf, unsigned char seq, short channel, @@ -712,11 +776,9 @@ static int intf_find_seq(ipmi_smi_t intf, if (intf->seq_table[seq].inuse) { struct ipmi_recv_msg *msg = intf->seq_table[seq].recv_msg; - if ((msg->addr.channel == channel) - && (msg->msg.cmd == cmd) - && (msg->msg.netfn == netfn) - && (ipmi_addr_equal(addr, &(msg->addr)))) - { + if ((msg->addr.channel == channel) && (msg->msg.cmd == cmd) + && (msg->msg.netfn == netfn) + && (ipmi_addr_equal(addr, &(msg->addr)))) { *recv_msg = msg; intf->seq_table[seq].inuse = 0; rv = 0; @@ -741,11 +803,12 @@ static int intf_start_seq_timer(ipmi_smi_t intf, GET_SEQ_FROM_MSGID(msgid, seq, seqid); spin_lock_irqsave(&(intf->seq_lock), flags); - /* We do this verification because the user can be deleted - while a message is outstanding. */ + /* + * We do this verification because the user can be deleted + * while a message is outstanding. + */ if ((intf->seq_table[seq].inuse) - && (intf->seq_table[seq].seqid == seqid)) - { + && (intf->seq_table[seq].seqid == seqid)) { struct seq_table *ent = &(intf->seq_table[seq]); ent->timeout = ent->orig_timeout; rv = 0; @@ -770,11 +833,12 @@ static int intf_err_seq(ipmi_smi_t intf, GET_SEQ_FROM_MSGID(msgid, seq, seqid); spin_lock_irqsave(&(intf->seq_lock), flags); - /* We do this verification because the user can be deleted - while a message is outstanding. */ + /* + * We do this verification because the user can be deleted + * while a message is outstanding. + */ if ((intf->seq_table[seq].inuse) - && (intf->seq_table[seq].seqid == seqid)) - { + && (intf->seq_table[seq].seqid == seqid)) { struct seq_table *ent = &(intf->seq_table[seq]); ent->inuse = 0; @@ -800,24 +864,30 @@ int ipmi_create_user(unsigned int if_num, int rv = 0; ipmi_smi_t intf; - /* There is no module usecount here, because it's not - required. Since this can only be used by and called from - other modules, they will implicitly use this module, and - thus this can't be removed unless the other modules are - removed. */ + /* + * There is no module usecount here, because it's not + * required. Since this can only be used by and called from + * other modules, they will implicitly use this module, and + * thus this can't be removed unless the other modules are + * removed. + */ if (handler == NULL) return -EINVAL; - /* Make sure the driver is actually initialized, this handles - problems with initialization order. */ + /* + * Make sure the driver is actually initialized, this handles + * problems with initialization order. + */ if (!initialized) { rv = ipmi_init_msghandler(); if (rv) return rv; - /* The init code doesn't return an error if it was turned - off, but it won't initialize. Check that. */ + /* + * The init code doesn't return an error if it was turned + * off, but it won't initialize. Check that. + */ if (!initialized) return -ENODEV; } @@ -858,8 +928,10 @@ int ipmi_create_user(unsigned int if_num, } } - /* Hold the lock so intf->handlers is guaranteed to be good - * until now */ + /* + * Hold the lock so intf->handlers is guaranteed to be good + * until now + */ mutex_unlock(&ipmi_interfaces_mutex); new_user->valid = 1; @@ -876,6 +948,7 @@ out_kfree: kfree(new_user); return rv; } +EXPORT_SYMBOL(ipmi_create_user); static void free_user(struct kref *ref) { @@ -899,8 +972,7 @@ int ipmi_destroy_user(ipmi_user_t user) for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) { if (intf->seq_table[i].inuse - && (intf->seq_table[i].recv_msg->user == user)) - { + && (intf->seq_table[i].recv_msg->user == user)) { intf->seq_table[i].inuse = 0; ipmi_free_recv_msg(intf->seq_table[i].recv_msg); } @@ -943,6 +1015,7 @@ int ipmi_destroy_user(ipmi_user_t user) return 0; } +EXPORT_SYMBOL(ipmi_destroy_user); void ipmi_get_version(ipmi_user_t user, unsigned char *major, @@ -951,6 +1024,7 @@ void ipmi_get_version(ipmi_user_t user, *major = user->intf->ipmi_version_major; *minor = user->intf->ipmi_version_minor; } +EXPORT_SYMBOL(ipmi_get_version); int ipmi_set_my_address(ipmi_user_t user, unsigned int channel, @@ -961,6 +1035,7 @@ int ipmi_set_my_address(ipmi_user_t user, user->intf->channels[channel].address = address; return 0; } +EXPORT_SYMBOL(ipmi_set_my_address); int ipmi_get_my_address(ipmi_user_t user, unsigned int channel, @@ -971,6 +1046,7 @@ int ipmi_get_my_address(ipmi_user_t user, *address = user->intf->channels[channel].address; return 0; } +EXPORT_SYMBOL(ipmi_get_my_address); int ipmi_set_my_LUN(ipmi_user_t user, unsigned int channel, @@ -981,6 +1057,7 @@ int ipmi_set_my_LUN(ipmi_user_t user, user->intf->channels[channel].lun = LUN & 0x3; return 0; } +EXPORT_SYMBOL(ipmi_set_my_LUN); int ipmi_get_my_LUN(ipmi_user_t user, unsigned int channel, @@ -991,6 +1068,7 @@ int ipmi_get_my_LUN(ipmi_user_t user, *address = user->intf->channels[channel].lun; return 0; } +EXPORT_SYMBOL(ipmi_get_my_LUN); int ipmi_get_maintenance_mode(ipmi_user_t user) { @@ -1075,6 +1153,11 @@ int ipmi_set_gets_events(ipmi_user_t user, int val) list_for_each_entry_safe(msg, msg2, &intf->waiting_events, link) list_move_tail(&msg->link, &msgs); intf->waiting_events_count = 0; + if (intf->event_msg_printed) { + printk(KERN_WARNING PFX "Event queue no longer" + " full\n"); + intf->event_msg_printed = 0; + } intf->delivering_events = 1; spin_unlock_irqrestore(&intf->events_lock, flags); @@ -1094,6 +1177,7 @@ int ipmi_set_gets_events(ipmi_user_t user, int val) return 0; } +EXPORT_SYMBOL(ipmi_set_gets_events); static struct cmd_rcvr *find_cmd_rcvr(ipmi_smi_t intf, unsigned char netfn, @@ -1159,6 +1243,7 @@ int ipmi_register_for_cmd(ipmi_user_t user, return rv; } +EXPORT_SYMBOL(ipmi_register_for_cmd); int ipmi_unregister_for_cmd(ipmi_user_t user, unsigned char netfn, @@ -1196,19 +1281,13 @@ int ipmi_unregister_for_cmd(ipmi_user_t user, } return rv; } - -void ipmi_user_set_run_to_completion(ipmi_user_t user, int val) -{ - ipmi_smi_t intf = user->intf; - if (intf->handlers) - intf->handlers->set_run_to_completion(intf->send_info, val); -} +EXPORT_SYMBOL(ipmi_unregister_for_cmd); static unsigned char ipmb_checksum(unsigned char *data, int size) { unsigned char csum = 0; - + for (; size > 0; size--, data++) csum += *data; @@ -1250,8 +1329,10 @@ static inline void format_ipmb_msg(struct ipmi_smi_msg *smi_msg, = ipmb_checksum(&(smi_msg->data[i+6]), smi_msg->data_size-6); - /* Add on the checksum size and the offset from the - broadcast. */ + /* + * Add on the checksum size and the offset from the + * broadcast. + */ smi_msg->data_size += 1 + i; smi_msg->msgid = msgid; @@ -1287,17 +1368,21 @@ static inline void format_lan_msg(struct ipmi_smi_msg *smi_msg, = ipmb_checksum(&(smi_msg->data[7]), smi_msg->data_size-7); - /* Add on the checksum size and the offset from the - broadcast. */ + /* + * Add on the checksum size and the offset from the + * broadcast. + */ smi_msg->data_size += 1; smi_msg->msgid = msgid; } -/* Separate from ipmi_request so that the user does not have to be - supplied in certain circumstances (mainly at panic time). If - messages are supplied, they will be freed, even if an error - occurs. */ +/* + * Separate from ipmi_request so that the user does not have to be + * supplied in certain circumstances (mainly at panic time). If + * messages are supplied, they will be freed, even if an error + * occurs. + */ static int i_ipmi_request(ipmi_user_t user, ipmi_smi_t intf, struct ipmi_addr *addr, @@ -1319,19 +1404,18 @@ static int i_ipmi_request(ipmi_user_t user, struct ipmi_smi_handlers *handlers; - if (supplied_recv) { + if (supplied_recv) recv_msg = supplied_recv; - } else { + else { recv_msg = ipmi_alloc_recv_msg(); - if (recv_msg == NULL) { + if (recv_msg == NULL) return -ENOMEM; - } } recv_msg->user_msg_data = user_msg_data; - if (supplied_smi) { + if (supplied_smi) smi_msg = (struct ipmi_smi_msg *) supplied_smi; - } else { + else { smi_msg = ipmi_alloc_smi_msg(); if (smi_msg == NULL) { ipmi_free_recv_msg(recv_msg); @@ -1350,8 +1434,10 @@ static int i_ipmi_request(ipmi_user_t user, if (user) kref_get(&user->refcount); recv_msg->msgid = msgid; - /* Store the message to send in the receive message so timeout - responses can get the proper response data. */ + /* + * Store the message to send in the receive message so timeout + * responses can get the proper response data. + */ recv_msg->msg = *msg; if (addr->addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) { @@ -1365,9 +1451,7 @@ static int i_ipmi_request(ipmi_user_t user, smi_addr = (struct ipmi_system_interface_addr *) addr; if (smi_addr->lun > 3) { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } @@ -1377,13 +1461,12 @@ static int i_ipmi_request(ipmi_user_t user, if ((msg->netfn == IPMI_NETFN_APP_REQUEST) && ((msg->cmd == IPMI_SEND_MSG_CMD) || (msg->cmd == IPMI_GET_MSG_CMD) - || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD))) - { - /* We don't let the user do these, since we manage - the sequence numbers. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + || (msg->cmd == IPMI_READ_EVENT_MSG_BUFFER_CMD))) { + /* + * We don't let the user do these, since we manage + * the sequence numbers. + */ + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } @@ -1391,14 +1474,12 @@ static int i_ipmi_request(ipmi_user_t user, if (((msg->netfn == IPMI_NETFN_APP_REQUEST) && ((msg->cmd == IPMI_COLD_RESET_CMD) || (msg->cmd == IPMI_WARM_RESET_CMD))) - || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST)) - { + || (msg->netfn == IPMI_NETFN_FIRMWARE_REQUEST)) { spin_lock_irqsave(&intf->maintenance_mode_lock, flags); intf->auto_maintenance_timeout = IPMI_MAINTENANCE_MODE_TIMEOUT; if (!intf->maintenance_mode - && !intf->maintenance_mode_enable) - { + && !intf->maintenance_mode_enable) { intf->maintenance_mode_enable = 1; maintenance_mode_update(intf); } @@ -1407,9 +1488,7 @@ static int i_ipmi_request(ipmi_user_t user, } if ((msg->data_len + 2) > IPMI_MAX_MSG_LENGTH) { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EMSGSIZE; goto out_err; } @@ -1421,31 +1500,23 @@ static int i_ipmi_request(ipmi_user_t user, if (msg->data_len > 0) memcpy(&(smi_msg->data[2]), msg->data, msg->data_len); smi_msg->data_size = msg->data_len + 2; - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_local_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_local_commands); } else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE) - || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) - { + || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) { struct ipmi_ipmb_addr *ipmb_addr; unsigned char ipmb_seq; long seqid; int broadcast = 0; if (addr->channel >= IPMI_MAX_CHANNELS) { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } if (intf->channels[addr->channel].medium - != IPMI_CHANNEL_MEDIUM_IPMB) - { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + != IPMI_CHANNEL_MEDIUM_IPMB) { + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } @@ -1457,9 +1528,11 @@ static int i_ipmi_request(ipmi_user_t user, retries = 4; } if (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE) { - /* Broadcasts add a zero at the beginning of the - message, but otherwise is the same as an IPMB - address. */ + /* + * Broadcasts add a zero at the beginning of the + * message, but otherwise is the same as an IPMB + * address. + */ addr->addr_type = IPMI_IPMB_ADDR_TYPE; broadcast = 1; } @@ -1469,21 +1542,19 @@ static int i_ipmi_request(ipmi_user_t user, if (retry_time_ms == 0) retry_time_ms = 1000; - /* 9 for the header and 1 for the checksum, plus - possibly one for the broadcast. */ + /* + * 9 for the header and 1 for the checksum, plus + * possibly one for the broadcast. + */ if ((msg->data_len + 10 + broadcast) > IPMI_MAX_MSG_LENGTH) { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EMSGSIZE; goto out_err; } ipmb_addr = (struct ipmi_ipmb_addr *) addr; if (ipmb_addr->lun > 3) { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } @@ -1491,29 +1562,31 @@ static int i_ipmi_request(ipmi_user_t user, memcpy(&recv_msg->addr, ipmb_addr, sizeof(*ipmb_addr)); if (recv_msg->msg.netfn & 0x1) { - /* It's a response, so use the user's sequence - from msgid. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_ipmb_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + /* + * It's a response, so use the user's sequence + * from msgid. + */ + ipmi_inc_stat(intf, sent_ipmb_responses); format_ipmb_msg(smi_msg, msg, ipmb_addr, msgid, msgid, broadcast, source_address, source_lun); - /* Save the receive message so we can use it - to deliver the response. */ + /* + * Save the receive message so we can use it + * to deliver the response. + */ smi_msg->user_data = recv_msg; } else { /* It's a command, so get a sequence for it. */ spin_lock_irqsave(&(intf->seq_lock), flags); - spin_lock(&intf->counter_lock); - intf->sent_ipmb_commands++; - spin_unlock(&intf->counter_lock); + ipmi_inc_stat(intf, sent_ipmb_commands); - /* Create a sequence number with a 1 second - timeout and 4 retries. */ + /* + * Create a sequence number with a 1 second + * timeout and 4 retries. + */ rv = intf_next_seq(intf, recv_msg, retry_time_ms, @@ -1522,34 +1595,42 @@ static int i_ipmi_request(ipmi_user_t user, &ipmb_seq, &seqid); if (rv) { - /* We have used up all the sequence numbers, - probably, so abort. */ + /* + * We have used up all the sequence numbers, + * probably, so abort. + */ spin_unlock_irqrestore(&(intf->seq_lock), flags); goto out_err; } - /* Store the sequence number in the message, - so that when the send message response - comes back we can start the timer. */ + /* + * Store the sequence number in the message, + * so that when the send message response + * comes back we can start the timer. + */ format_ipmb_msg(smi_msg, msg, ipmb_addr, STORE_SEQ_IN_MSGID(ipmb_seq, seqid), ipmb_seq, broadcast, source_address, source_lun); - /* Copy the message into the recv message data, so we - can retransmit it later if necessary. */ + /* + * Copy the message into the recv message data, so we + * can retransmit it later if necessary. + */ memcpy(recv_msg->msg_data, smi_msg->data, smi_msg->data_size); recv_msg->msg.data = recv_msg->msg_data; recv_msg->msg.data_len = smi_msg->data_size; - /* We don't unlock until here, because we need - to copy the completed message into the - recv_msg before we release the lock. - Otherwise, race conditions may bite us. I - know that's pretty paranoid, but I prefer - to be correct. */ + /* + * We don't unlock until here, because we need + * to copy the completed message into the + * recv_msg before we release the lock. + * Otherwise, race conditions may bite us. I + * know that's pretty paranoid, but I prefer + * to be correct. + */ spin_unlock_irqrestore(&(intf->seq_lock), flags); } } else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) { @@ -1558,21 +1639,16 @@ static int i_ipmi_request(ipmi_user_t user, long seqid; if (addr->channel >= IPMI_MAX_CHANNELS) { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } if ((intf->channels[addr->channel].medium - != IPMI_CHANNEL_MEDIUM_8023LAN) + != IPMI_CHANNEL_MEDIUM_8023LAN) && (intf->channels[addr->channel].medium - != IPMI_CHANNEL_MEDIUM_ASYNC)) - { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + != IPMI_CHANNEL_MEDIUM_ASYNC)) { + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } @@ -1585,18 +1661,14 @@ static int i_ipmi_request(ipmi_user_t user, /* 11 for the header and 1 for the checksum. */ if ((msg->data_len + 12) > IPMI_MAX_MSG_LENGTH) { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EMSGSIZE; goto out_err; } lan_addr = (struct ipmi_lan_addr *) addr; if (lan_addr->lun > 3) { - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } @@ -1604,28 +1676,30 @@ static int i_ipmi_request(ipmi_user_t user, memcpy(&recv_msg->addr, lan_addr, sizeof(*lan_addr)); if (recv_msg->msg.netfn & 0x1) { - /* It's a response, so use the user's sequence - from msgid. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_lan_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + /* + * It's a response, so use the user's sequence + * from msgid. + */ + ipmi_inc_stat(intf, sent_lan_responses); format_lan_msg(smi_msg, msg, lan_addr, msgid, msgid, source_lun); - /* Save the receive message so we can use it - to deliver the response. */ + /* + * Save the receive message so we can use it + * to deliver the response. + */ smi_msg->user_data = recv_msg; } else { /* It's a command, so get a sequence for it. */ spin_lock_irqsave(&(intf->seq_lock), flags); - spin_lock(&intf->counter_lock); - intf->sent_lan_commands++; - spin_unlock(&intf->counter_lock); + ipmi_inc_stat(intf, sent_lan_commands); - /* Create a sequence number with a 1 second - timeout and 4 retries. */ + /* + * Create a sequence number with a 1 second + * timeout and 4 retries. + */ rv = intf_next_seq(intf, recv_msg, retry_time_ms, @@ -1634,40 +1708,46 @@ static int i_ipmi_request(ipmi_user_t user, &ipmb_seq, &seqid); if (rv) { - /* We have used up all the sequence numbers, - probably, so abort. */ + /* + * We have used up all the sequence numbers, + * probably, so abort. + */ spin_unlock_irqrestore(&(intf->seq_lock), flags); goto out_err; } - /* Store the sequence number in the message, - so that when the send message response - comes back we can start the timer. */ + /* + * Store the sequence number in the message, + * so that when the send message response + * comes back we can start the timer. + */ format_lan_msg(smi_msg, msg, lan_addr, STORE_SEQ_IN_MSGID(ipmb_seq, seqid), ipmb_seq, source_lun); - /* Copy the message into the recv message data, so we - can retransmit it later if necessary. */ + /* + * Copy the message into the recv message data, so we + * can retransmit it later if necessary. + */ memcpy(recv_msg->msg_data, smi_msg->data, smi_msg->data_size); recv_msg->msg.data = recv_msg->msg_data; recv_msg->msg.data_len = smi_msg->data_size; - /* We don't unlock until here, because we need - to copy the completed message into the - recv_msg before we release the lock. - Otherwise, race conditions may bite us. I - know that's pretty paranoid, but I prefer - to be correct. */ + /* + * We don't unlock until here, because we need + * to copy the completed message into the + * recv_msg before we release the lock. + * Otherwise, race conditions may bite us. I + * know that's pretty paranoid, but I prefer + * to be correct. + */ spin_unlock_irqrestore(&(intf->seq_lock), flags); } } else { /* Unknown address type. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->sent_invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_invalid_commands); rv = -EINVAL; goto out_err; } @@ -1735,6 +1815,7 @@ int ipmi_request_settime(ipmi_user_t user, retries, retry_time_ms); } +EXPORT_SYMBOL(ipmi_request_settime); int ipmi_request_supply_msgs(ipmi_user_t user, struct ipmi_addr *addr, @@ -1766,6 +1847,7 @@ int ipmi_request_supply_msgs(ipmi_user_t user, lun, -1, 0); } +EXPORT_SYMBOL(ipmi_request_supply_msgs); #ifdef CONFIG_PROC_FS static int ipmb_file_read_proc(char *page, char **start, off_t off, @@ -1790,7 +1872,7 @@ static int version_file_read_proc(char *page, char **start, off_t off, char *out = (char *) page; ipmi_smi_t intf = data; - return sprintf(out, "%d.%d\n", + return sprintf(out, "%u.%u\n", ipmi_version_major(&intf->bmc->id), ipmi_version_minor(&intf->bmc->id)); } @@ -1801,65 +1883,65 @@ static int stat_file_read_proc(char *page, char **start, off_t off, char *out = (char *) page; ipmi_smi_t intf = data; - out += sprintf(out, "sent_invalid_commands: %d\n", - intf->sent_invalid_commands); - out += sprintf(out, "sent_local_commands: %d\n", - intf->sent_local_commands); - out += sprintf(out, "handled_local_responses: %d\n", - intf->handled_local_responses); - out += sprintf(out, "unhandled_local_responses: %d\n", - intf->unhandled_local_responses); - out += sprintf(out, "sent_ipmb_commands: %d\n", - intf->sent_ipmb_commands); - out += sprintf(out, "sent_ipmb_command_errs: %d\n", - intf->sent_ipmb_command_errs); - out += sprintf(out, "retransmitted_ipmb_commands: %d\n", - intf->retransmitted_ipmb_commands); - out += sprintf(out, "timed_out_ipmb_commands: %d\n", - intf->timed_out_ipmb_commands); - out += sprintf(out, "timed_out_ipmb_broadcasts: %d\n", - intf->timed_out_ipmb_broadcasts); - out += sprintf(out, "sent_ipmb_responses: %d\n", - intf->sent_ipmb_responses); - out += sprintf(out, "handled_ipmb_responses: %d\n", - intf->handled_ipmb_responses); - out += sprintf(out, "invalid_ipmb_responses: %d\n", - intf->invalid_ipmb_responses); - out += sprintf(out, "unhandled_ipmb_responses: %d\n", - intf->unhandled_ipmb_responses); - out += sprintf(out, "sent_lan_commands: %d\n", - intf->sent_lan_commands); - out += sprintf(out, "sent_lan_command_errs: %d\n", - intf->sent_lan_command_errs); - out += sprintf(out, "retransmitted_lan_commands: %d\n", - intf->retransmitted_lan_commands); - out += sprintf(out, "timed_out_lan_commands: %d\n", - intf->timed_out_lan_commands); - out += sprintf(out, "sent_lan_responses: %d\n", - intf->sent_lan_responses); - out += sprintf(out, "handled_lan_responses: %d\n", - intf->handled_lan_responses); - out += sprintf(out, "invalid_lan_responses: %d\n", - intf->invalid_lan_responses); - out += sprintf(out, "unhandled_lan_responses: %d\n", - intf->unhandled_lan_responses); - out += sprintf(out, "handled_commands: %d\n", - intf->handled_commands); - out += sprintf(out, "invalid_commands: %d\n", - intf->invalid_commands); - out += sprintf(out, "unhandled_commands: %d\n", - intf->unhandled_commands); - out += sprintf(out, "invalid_events: %d\n", - intf->invalid_events); - out += sprintf(out, "events: %d\n", - intf->events); + out += sprintf(out, "sent_invalid_commands: %u\n", + ipmi_get_stat(intf, sent_invalid_commands)); + out += sprintf(out, "sent_local_commands: %u\n", + ipmi_get_stat(intf, sent_local_commands)); + out += sprintf(out, "handled_local_responses: %u\n", + ipmi_get_stat(intf, handled_local_responses)); + out += sprintf(out, "unhandled_local_responses: %u\n", + ipmi_get_stat(intf, unhandled_local_responses)); + out += sprintf(out, "sent_ipmb_commands: %u\n", + ipmi_get_stat(intf, sent_ipmb_commands)); + out += sprintf(out, "sent_ipmb_command_errs: %u\n", + ipmi_get_stat(intf, sent_ipmb_command_errs)); + out += sprintf(out, "retransmitted_ipmb_commands: %u\n", + ipmi_get_stat(intf, retransmitted_ipmb_commands)); + out += sprintf(out, "timed_out_ipmb_commands: %u\n", + ipmi_get_stat(intf, timed_out_ipmb_commands)); + out += sprintf(out, "timed_out_ipmb_broadcasts: %u\n", + ipmi_get_stat(intf, timed_out_ipmb_broadcasts)); + out += sprintf(out, "sent_ipmb_responses: %u\n", + ipmi_get_stat(intf, sent_ipmb_responses)); + out += sprintf(out, "handled_ipmb_responses: %u\n", + ipmi_get_stat(intf, handled_ipmb_responses)); + out += sprintf(out, "invalid_ipmb_responses: %u\n", + ipmi_get_stat(intf, invalid_ipmb_responses)); + out += sprintf(out, "unhandled_ipmb_responses: %u\n", + ipmi_get_stat(intf, unhandled_ipmb_responses)); + out += sprintf(out, "sent_lan_commands: %u\n", + ipmi_get_stat(intf, sent_lan_commands)); + out += sprintf(out, "sent_lan_command_errs: %u\n", + ipmi_get_stat(intf, sent_lan_command_errs)); + out += sprintf(out, "retransmitted_lan_commands: %u\n", + ipmi_get_stat(intf, retransmitted_lan_commands)); + out += sprintf(out, "timed_out_lan_commands: %u\n", + ipmi_get_stat(intf, timed_out_lan_commands)); + out += sprintf(out, "sent_lan_responses: %u\n", + ipmi_get_stat(intf, sent_lan_responses)); + out += sprintf(out, "handled_lan_responses: %u\n", + ipmi_get_stat(intf, handled_lan_responses)); + out += sprintf(out, "invalid_lan_responses: %u\n", + ipmi_get_stat(intf, invalid_lan_responses)); + out += sprintf(out, "unhandled_lan_responses: %u\n", + ipmi_get_stat(intf, unhandled_lan_responses)); + out += sprintf(out, "handled_commands: %u\n", + ipmi_get_stat(intf, handled_commands)); + out += sprintf(out, "invalid_commands: %u\n", + ipmi_get_stat(intf, invalid_commands)); + out += sprintf(out, "unhandled_commands: %u\n", + ipmi_get_stat(intf, unhandled_commands)); + out += sprintf(out, "invalid_events: %u\n", + ipmi_get_stat(intf, invalid_events)); + out += sprintf(out, "events: %u\n", + ipmi_get_stat(intf, events)); return (out - ((char *) page)); } #endif /* CONFIG_PROC_FS */ int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, - read_proc_t *read_proc, write_proc_t *write_proc, + read_proc_t *read_proc, void *data, struct module *owner) { int rv = 0; @@ -1886,7 +1968,6 @@ int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, } else { file->data = data; file->read_proc = read_proc; - file->write_proc = write_proc; file->owner = owner; mutex_lock(&smi->proc_entry_lock); @@ -1899,6 +1980,7 @@ int ipmi_smi_add_proc_entry(ipmi_smi_t smi, char *name, return rv; } +EXPORT_SYMBOL(ipmi_smi_add_proc_entry); static int add_proc_entries(ipmi_smi_t smi, int num) { @@ -1909,23 +1991,22 @@ static int add_proc_entries(ipmi_smi_t smi, int num) smi->proc_dir = proc_mkdir(smi->proc_dir_name, proc_ipmi_root); if (!smi->proc_dir) rv = -ENOMEM; - else { + else smi->proc_dir->owner = THIS_MODULE; - } if (rv == 0) rv = ipmi_smi_add_proc_entry(smi, "stats", - stat_file_read_proc, NULL, + stat_file_read_proc, smi, THIS_MODULE); if (rv == 0) rv = ipmi_smi_add_proc_entry(smi, "ipmb", - ipmb_file_read_proc, NULL, + ipmb_file_read_proc, smi, THIS_MODULE); if (rv == 0) rv = ipmi_smi_add_proc_entry(smi, "version", - version_file_read_proc, NULL, + version_file_read_proc, smi, THIS_MODULE); #endif /* CONFIG_PROC_FS */ @@ -2210,37 +2291,47 @@ static int create_files(struct bmc_device *bmc) err = device_create_file(&bmc->dev->dev, &bmc->device_id_attr); - if (err) goto out; + if (err) + goto out; err = device_create_file(&bmc->dev->dev, &bmc->provides_dev_sdrs_attr); - if (err) goto out_devid; + if (err) + goto out_devid; err = device_create_file(&bmc->dev->dev, &bmc->revision_attr); - if (err) goto out_sdrs; + if (err) + goto out_sdrs; err = device_create_file(&bmc->dev->dev, &bmc->firmware_rev_attr); - if (err) goto out_rev; + if (err) + goto out_rev; err = device_create_file(&bmc->dev->dev, &bmc->version_attr); - if (err) goto out_firm; + if (err) + goto out_firm; err = device_create_file(&bmc->dev->dev, &bmc->add_dev_support_attr); - if (err) goto out_version; + if (err) + goto out_version; err = device_create_file(&bmc->dev->dev, &bmc->manufacturer_id_attr); - if (err) goto out_add_dev; + if (err) + goto out_add_dev; err = device_create_file(&bmc->dev->dev, &bmc->product_id_attr); - if (err) goto out_manu; + if (err) + goto out_manu; if (bmc->id.aux_firmware_revision_set) { err = device_create_file(&bmc->dev->dev, &bmc->aux_firmware_rev_attr); - if (err) goto out_prod_id; + if (err) + goto out_prod_id; } if (bmc->guid_set) { err = device_create_file(&bmc->dev->dev, &bmc->guid_attr); - if (err) goto out_aux_firm; + if (err) + goto out_aux_firm; } return 0; @@ -2368,8 +2459,10 @@ static int ipmi_bmc_register(ipmi_smi_t intf, int ifnum, "ipmi_msghandler:" " Unable to register bmc device: %d\n", rv); - /* Don't go to out_err, you can only do that if - the device is registered already. */ + /* + * Don't go to out_err, you can only do that if + * the device is registered already. + */ return rv; } @@ -2560,17 +2653,18 @@ channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) - && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD)) - { + && (msg->msg.cmd == IPMI_GET_CHANNEL_INFO_CMD)) { /* It's the one we want */ if (msg->msg.data[0] != 0) { /* Got an error from the channel, just go on. */ if (msg->msg.data[0] == IPMI_INVALID_COMMAND_ERR) { - /* If the MC does not support this - command, that is legal. We just - assume it has one IPMB at channel - zero. */ + /* + * If the MC does not support this + * command, that is legal. We just + * assume it has one IPMB at channel + * zero. + */ intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB; intf->channels[0].protocol @@ -2591,7 +2685,7 @@ channel_handler(ipmi_smi_t intf, struct ipmi_recv_msg *msg) intf->channels[chan].medium = msg->msg.data[2] & 0x7f; intf->channels[chan].protocol = msg->msg.data[3] & 0x1f; - next_channel: + next_channel: intf->curr_channel++; if (intf->curr_channel >= IPMI_MAX_CHANNELS) wake_up(&intf->waitq); @@ -2619,6 +2713,7 @@ void ipmi_poll_interface(ipmi_user_t user) if (intf->handlers->poll) intf->handlers->poll(intf->send_info); } +EXPORT_SYMBOL(ipmi_poll_interface); int ipmi_register_smi(struct ipmi_smi_handlers *handlers, void *send_info, @@ -2633,14 +2728,18 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, ipmi_smi_t tintf; struct list_head *link; - /* Make sure the driver is actually initialized, this handles - problems with initialization order. */ + /* + * Make sure the driver is actually initialized, this handles + * problems with initialization order. + */ if (!initialized) { rv = ipmi_init_msghandler(); if (rv) return rv; - /* The init code doesn't return an error if it was turned - off, but it won't initialize. Check that. */ + /* + * The init code doesn't return an error if it was turned + * off, but it won't initialize. Check that. + */ if (!initialized) return -ENODEV; } @@ -2688,8 +2787,9 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, spin_lock_init(&intf->maintenance_mode_lock); INIT_LIST_HEAD(&intf->cmd_rcvrs); init_waitqueue_head(&intf->waitq); + for (i = 0; i < IPMI_NUM_STATS; i++) + atomic_set(&intf->stats[i], 0); - spin_lock_init(&intf->counter_lock); intf->proc_dir = NULL; mutex_lock(&smi_watchers_mutex); @@ -2717,11 +2817,12 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, get_guid(intf); if ((intf->ipmi_version_major > 1) - || ((intf->ipmi_version_major == 1) - && (intf->ipmi_version_minor >= 5))) - { - /* Start scanning the channels to see what is - available. */ + || ((intf->ipmi_version_major == 1) + && (intf->ipmi_version_minor >= 5))) { + /* + * Start scanning the channels to see what is + * available. + */ intf->null_user_handler = channel_handler; intf->curr_channel = 0; rv = send_channel_info_cmd(intf, 0); @@ -2769,6 +2870,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, return rv; } +EXPORT_SYMBOL(ipmi_register_smi); static void cleanup_smi_msgs(ipmi_smi_t intf) { @@ -2803,8 +2905,10 @@ int ipmi_unregister_smi(ipmi_smi_t intf) remove_proc_entries(intf); - /* Call all the watcher interfaces to tell them that - an interface is gone. */ + /* + * Call all the watcher interfaces to tell them that + * an interface is gone. + */ list_for_each_entry(w, &smi_watchers, link) w->smi_gone(intf_num); mutex_unlock(&smi_watchers_mutex); @@ -2812,22 +2916,21 @@ int ipmi_unregister_smi(ipmi_smi_t intf) kref_put(&intf->refcount, intf_free); return 0; } +EXPORT_SYMBOL(ipmi_unregister_smi); static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf, struct ipmi_smi_msg *msg) { struct ipmi_ipmb_addr ipmb_addr; struct ipmi_recv_msg *recv_msg; - unsigned long flags; - - /* This is 11, not 10, because the response must contain a - * completion code. */ + /* + * This is 11, not 10, because the response must contain a + * completion code. + */ if (msg->rsp_size < 11) { /* Message not big enough, just ignore it. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->invalid_ipmb_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, invalid_ipmb_responses); return 0; } @@ -2841,37 +2944,38 @@ static int handle_ipmb_get_msg_rsp(ipmi_smi_t intf, ipmb_addr.channel = msg->rsp[3] & 0x0f; ipmb_addr.lun = msg->rsp[7] & 3; - /* It's a response from a remote entity. Look up the sequence - number and handle the response. */ + /* + * It's a response from a remote entity. Look up the sequence + * number and handle the response. + */ if (intf_find_seq(intf, msg->rsp[7] >> 2, msg->rsp[3] & 0x0f, msg->rsp[8], (msg->rsp[4] >> 2) & (~1), (struct ipmi_addr *) &(ipmb_addr), - &recv_msg)) - { - /* We were unable to find the sequence number, - so just nuke the message. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->unhandled_ipmb_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + &recv_msg)) { + /* + * We were unable to find the sequence number, + * so just nuke the message. + */ + ipmi_inc_stat(intf, unhandled_ipmb_responses); return 0; } memcpy(recv_msg->msg_data, &(msg->rsp[9]), msg->rsp_size - 9); - /* THe other fields matched, so no need to set them, except - for netfn, which needs to be the response that was - returned, not the request value. */ + /* + * The other fields matched, so no need to set them, except + * for netfn, which needs to be the response that was + * returned, not the request value. + */ recv_msg->msg.netfn = msg->rsp[4] >> 2; recv_msg->msg.data = recv_msg->msg_data; recv_msg->msg.data_len = msg->rsp_size - 10; recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; - spin_lock_irqsave(&intf->counter_lock, flags); - intf->handled_ipmb_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, handled_ipmb_responses); deliver_response(recv_msg); return 0; @@ -2888,14 +2992,11 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf, ipmi_user_t user = NULL; struct ipmi_ipmb_addr *ipmb_addr; struct ipmi_recv_msg *recv_msg; - unsigned long flags; struct ipmi_smi_handlers *handlers; if (msg->rsp_size < 10) { /* Message not big enough, just ignore it. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, invalid_commands); return 0; } @@ -2919,19 +3020,17 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf, if (user == NULL) { /* We didn't find a user, deliver an error response. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->unhandled_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, unhandled_commands); msg->data[0] = (IPMI_NETFN_APP_REQUEST << 2); msg->data[1] = IPMI_SEND_MSG_CMD; msg->data[2] = msg->rsp[3]; msg->data[3] = msg->rsp[6]; - msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3); + msg->data[4] = ((netfn + 1) << 2) | (msg->rsp[7] & 0x3); msg->data[5] = ipmb_checksum(&(msg->data[3]), 2); msg->data[6] = intf->channels[msg->rsp[3] & 0xf].address; - /* rqseq/lun */ - msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3); + /* rqseq/lun */ + msg->data[7] = (msg->rsp[7] & 0xfc) | (msg->rsp[4] & 0x3); msg->data[8] = msg->rsp[8]; /* cmd */ msg->data[9] = IPMI_INVALID_CMD_COMPLETION_CODE; msg->data[10] = ipmb_checksum(&(msg->data[6]), 4); @@ -2950,23 +3049,25 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf, handlers = intf->handlers; if (handlers) { handlers->sender(intf->send_info, msg, 0); - /* We used the message, so return the value - that causes it to not be freed or - queued. */ + /* + * We used the message, so return the value + * that causes it to not be freed or + * queued. + */ rv = -1; } rcu_read_unlock(); } else { /* Deliver the message to the user. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->handled_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, handled_commands); recv_msg = ipmi_alloc_recv_msg(); if (!recv_msg) { - /* We couldn't allocate memory for the - message, so requeue it for handling - later. */ + /* + * We couldn't allocate memory for the + * message, so requeue it for handling + * later. + */ rv = 1; kref_put(&user->refcount, free_user); } else { @@ -2977,8 +3078,10 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf, ipmb_addr->lun = msg->rsp[7] & 3; ipmb_addr->channel = msg->rsp[3] & 0xf; - /* Extract the rest of the message information - from the IPMB header.*/ + /* + * Extract the rest of the message information + * from the IPMB header. + */ recv_msg->user = user; recv_msg->recv_type = IPMI_CMD_RECV_TYPE; recv_msg->msgid = msg->rsp[7] >> 2; @@ -2986,8 +3089,10 @@ static int handle_ipmb_get_msg_cmd(ipmi_smi_t intf, recv_msg->msg.cmd = msg->rsp[8]; recv_msg->msg.data = recv_msg->msg_data; - /* We chop off 10, not 9 bytes because the checksum - at the end also needs to be removed. */ + /* + * We chop off 10, not 9 bytes because the checksum + * at the end also needs to be removed. + */ recv_msg->msg.data_len = msg->rsp_size - 10; memcpy(recv_msg->msg_data, &(msg->rsp[9]), @@ -3004,16 +3109,15 @@ static int handle_lan_get_msg_rsp(ipmi_smi_t intf, { struct ipmi_lan_addr lan_addr; struct ipmi_recv_msg *recv_msg; - unsigned long flags; - /* This is 13, not 12, because the response must contain a - * completion code. */ + /* + * This is 13, not 12, because the response must contain a + * completion code. + */ if (msg->rsp_size < 13) { /* Message not big enough, just ignore it. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->invalid_lan_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, invalid_lan_responses); return 0; } @@ -3030,37 +3134,38 @@ static int handle_lan_get_msg_rsp(ipmi_smi_t intf, lan_addr.privilege = msg->rsp[3] >> 4; lan_addr.lun = msg->rsp[9] & 3; - /* It's a response from a remote entity. Look up the sequence - number and handle the response. */ + /* + * It's a response from a remote entity. Look up the sequence + * number and handle the response. + */ if (intf_find_seq(intf, msg->rsp[9] >> 2, msg->rsp[3] & 0x0f, msg->rsp[10], (msg->rsp[6] >> 2) & (~1), (struct ipmi_addr *) &(lan_addr), - &recv_msg)) - { - /* We were unable to find the sequence number, - so just nuke the message. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->unhandled_lan_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + &recv_msg)) { + /* + * We were unable to find the sequence number, + * so just nuke the message. + */ + ipmi_inc_stat(intf, unhandled_lan_responses); return 0; } memcpy(recv_msg->msg_data, &(msg->rsp[11]), msg->rsp_size - 11); - /* The other fields matched, so no need to set them, except - for netfn, which needs to be the response that was - returned, not the request value. */ + /* + * The other fields matched, so no need to set them, except + * for netfn, which needs to be the response that was + * returned, not the request value. + */ recv_msg->msg.netfn = msg->rsp[6] >> 2; recv_msg->msg.data = recv_msg->msg_data; recv_msg->msg.data_len = msg->rsp_size - 12; recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; - spin_lock_irqsave(&intf->counter_lock, flags); - intf->handled_lan_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, handled_lan_responses); deliver_response(recv_msg); return 0; @@ -3077,13 +3182,10 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf, ipmi_user_t user = NULL; struct ipmi_lan_addr *lan_addr; struct ipmi_recv_msg *recv_msg; - unsigned long flags; if (msg->rsp_size < 12) { /* Message not big enough, just ignore it. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->invalid_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, invalid_commands); return 0; } @@ -3107,23 +3209,23 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf, if (user == NULL) { /* We didn't find a user, just give up. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->unhandled_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, unhandled_commands); - rv = 0; /* Don't do anything with these messages, just - allow them to be freed. */ + /* + * Don't do anything with these messages, just allow + * them to be freed. + */ + rv = 0; } else { /* Deliver the message to the user. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->handled_commands++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, handled_commands); recv_msg = ipmi_alloc_recv_msg(); if (!recv_msg) { - /* We couldn't allocate memory for the - message, so requeue it for handling - later. */ + /* + * We couldn't allocate memory for the + * message, so requeue it for handling later. + */ rv = 1; kref_put(&user->refcount, free_user); } else { @@ -3137,8 +3239,10 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf, lan_addr->channel = msg->rsp[3] & 0xf; lan_addr->privilege = msg->rsp[3] >> 4; - /* Extract the rest of the message information - from the IPMB header.*/ + /* + * Extract the rest of the message information + * from the IPMB header. + */ recv_msg->user = user; recv_msg->recv_type = IPMI_CMD_RECV_TYPE; recv_msg->msgid = msg->rsp[9] >> 2; @@ -3146,8 +3250,10 @@ static int handle_lan_get_msg_cmd(ipmi_smi_t intf, recv_msg->msg.cmd = msg->rsp[10]; recv_msg->msg.data = recv_msg->msg_data; - /* We chop off 12, not 11 bytes because the checksum - at the end also needs to be removed. */ + /* + * We chop off 12, not 11 bytes because the checksum + * at the end also needs to be removed. + */ recv_msg->msg.data_len = msg->rsp_size - 12; memcpy(recv_msg->msg_data, &(msg->rsp[11]), @@ -3163,7 +3269,7 @@ static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg, struct ipmi_smi_msg *msg) { struct ipmi_system_interface_addr *smi_addr; - + recv_msg->msgid = 0; smi_addr = (struct ipmi_system_interface_addr *) &(recv_msg->addr); smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; @@ -3189,9 +3295,7 @@ static int handle_read_event_rsp(ipmi_smi_t intf, if (msg->rsp_size < 19) { /* Message is too small to be an IPMB event. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->invalid_events++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, invalid_events); return 0; } @@ -3204,12 +3308,12 @@ static int handle_read_event_rsp(ipmi_smi_t intf, spin_lock_irqsave(&intf->events_lock, flags); - spin_lock(&intf->counter_lock); - intf->events++; - spin_unlock(&intf->counter_lock); + ipmi_inc_stat(intf, events); - /* Allocate and fill in one message for every user that is getting - events. */ + /* + * Allocate and fill in one message for every user that is + * getting events. + */ rcu_read_lock(); list_for_each_entry_rcu(user, &intf->users, link) { if (!user->gets_events) @@ -3223,9 +3327,11 @@ static int handle_read_event_rsp(ipmi_smi_t intf, list_del(&recv_msg->link); ipmi_free_recv_msg(recv_msg); } - /* We couldn't allocate memory for the - message, so requeue it for handling - later. */ + /* + * We couldn't allocate memory for the + * message, so requeue it for handling + * later. + */ rv = 1; goto out; } @@ -3246,13 +3352,17 @@ static int handle_read_event_rsp(ipmi_smi_t intf, deliver_response(recv_msg); } } else if (intf->waiting_events_count < MAX_EVENTS_IN_QUEUE) { - /* No one to receive the message, put it in queue if there's - not already too many things in the queue. */ + /* + * No one to receive the message, put it in queue if there's + * not already too many things in the queue. + */ recv_msg = ipmi_alloc_recv_msg(); if (!recv_msg) { - /* We couldn't allocate memory for the - message, so requeue it for handling - later. */ + /* + * We couldn't allocate memory for the + * message, so requeue it for handling + * later. + */ rv = 1; goto out; } @@ -3260,11 +3370,14 @@ static int handle_read_event_rsp(ipmi_smi_t intf, copy_event_into_recv_msg(recv_msg, msg); list_add_tail(&(recv_msg->link), &(intf->waiting_events)); intf->waiting_events_count++; - } else { - /* There's too many things in the queue, discard this - message. */ - printk(KERN_WARNING PFX "Event queue full, discarding an" - " incoming event\n"); + } else if (!intf->event_msg_printed) { + /* + * There's too many things in the queue, discard this + * message. + */ + printk(KERN_WARNING PFX "Event queue full, discarding" + " incoming events\n"); + intf->event_msg_printed = 1; } out: @@ -3277,16 +3390,15 @@ static int handle_bmc_rsp(ipmi_smi_t intf, struct ipmi_smi_msg *msg) { struct ipmi_recv_msg *recv_msg; - unsigned long flags; struct ipmi_user *user; recv_msg = (struct ipmi_recv_msg *) msg->user_data; - if (recv_msg == NULL) - { - printk(KERN_WARNING"IPMI message received with no owner. This\n" - "could be because of a malformed message, or\n" - "because of a hardware error. Contact your\n" - "hardware vender for assistance\n"); + if (recv_msg == NULL) { + printk(KERN_WARNING + "IPMI message received with no owner. This\n" + "could be because of a malformed message, or\n" + "because of a hardware error. Contact your\n" + "hardware vender for assistance\n"); return 0; } @@ -3294,16 +3406,12 @@ static int handle_bmc_rsp(ipmi_smi_t intf, /* Make sure the user still exists. */ if (user && !user->valid) { /* The user for the message went away, so give up. */ - spin_lock_irqsave(&intf->counter_lock, flags); - intf->unhandled_local_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, unhandled_local_responses); ipmi_free_recv_msg(recv_msg); } else { struct ipmi_system_interface_addr *smi_addr; - spin_lock_irqsave(&intf->counter_lock, flags); - intf->handled_local_responses++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, handled_local_responses); recv_msg->recv_type = IPMI_RESPONSE_RECV_TYPE; recv_msg->msgid = msg->msgid; smi_addr = ((struct ipmi_system_interface_addr *) @@ -3324,9 +3432,11 @@ static int handle_bmc_rsp(ipmi_smi_t intf, return 0; } -/* Handle a new message. Return 1 if the message should be requeued, - 0 if the message should be freed, or -1 if the message should not - be freed or requeued. */ +/* + * Handle a new message. Return 1 if the message should be requeued, + * 0 if the message should be freed, or -1 if the message should not + * be freed or requeued. + */ static int handle_new_recv_msg(ipmi_smi_t intf, struct ipmi_smi_msg *msg) { @@ -3351,10 +3461,12 @@ static int handle_new_recv_msg(ipmi_smi_t intf, msg->rsp[1] = msg->data[1]; msg->rsp[2] = IPMI_ERR_UNSPECIFIED; msg->rsp_size = 3; - } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1))/* Netfn */ - || (msg->rsp[1] != msg->data[1])) /* Command */ - { - /* The response is not even marginally correct. */ + } else if (((msg->rsp[0] >> 2) != ((msg->data[0] >> 2) | 1)) + || (msg->rsp[1] != msg->data[1])) { + /* + * The NetFN and Command in the response is not even + * marginally correct. + */ printk(KERN_WARNING PFX "BMC returned incorrect response," " expected netfn %x cmd %x, got netfn %x cmd %x\n", (msg->data[0] >> 2) | 1, msg->data[1], @@ -3369,10 +3481,11 @@ static int handle_new_recv_msg(ipmi_smi_t intf, if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) && (msg->rsp[1] == IPMI_SEND_MSG_CMD) - && (msg->user_data != NULL)) - { - /* It's a response to a response we sent. For this we - deliver a send message response to the user. */ + && (msg->user_data != NULL)) { + /* + * It's a response to a response we sent. For this we + * deliver a send message response to the user. + */ struct ipmi_recv_msg *recv_msg = msg->user_data; requeue = 0; @@ -3398,8 +3511,7 @@ static int handle_new_recv_msg(ipmi_smi_t intf, recv_msg->msg_data[0] = msg->rsp[2]; deliver_response(recv_msg); } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) - && (msg->rsp[1] == IPMI_GET_MSG_CMD)) - { + && (msg->rsp[1] == IPMI_GET_MSG_CMD)) { /* It's from the receive queue. */ chan = msg->rsp[3] & 0xf; if (chan >= IPMI_MAX_CHANNELS) { @@ -3411,12 +3523,16 @@ static int handle_new_recv_msg(ipmi_smi_t intf, switch (intf->channels[chan].medium) { case IPMI_CHANNEL_MEDIUM_IPMB: if (msg->rsp[4] & 0x04) { - /* It's a response, so find the - requesting message and send it up. */ + /* + * It's a response, so find the + * requesting message and send it up. + */ requeue = handle_ipmb_get_msg_rsp(intf, msg); } else { - /* It's a command to the SMS from some other - entity. Handle that. */ + /* + * It's a command to the SMS from some other + * entity. Handle that. + */ requeue = handle_ipmb_get_msg_cmd(intf, msg); } break; @@ -3424,25 +3540,30 @@ static int handle_new_recv_msg(ipmi_smi_t intf, case IPMI_CHANNEL_MEDIUM_8023LAN: case IPMI_CHANNEL_MEDIUM_ASYNC: if (msg->rsp[6] & 0x04) { - /* It's a response, so find the - requesting message and send it up. */ + /* + * It's a response, so find the + * requesting message and send it up. + */ requeue = handle_lan_get_msg_rsp(intf, msg); } else { - /* It's a command to the SMS from some other - entity. Handle that. */ + /* + * It's a command to the SMS from some other + * entity. Handle that. + */ requeue = handle_lan_get_msg_cmd(intf, msg); } break; default: - /* We don't handle the channel type, so just - * free the message. */ + /* + * We don't handle the channel type, so just + * free the message. + */ requeue = 0; } } else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2)) - && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) - { + && (msg->rsp[1] == IPMI_READ_EVENT_MSG_BUFFER_CMD)) { /* It's an asyncronous event. */ requeue = handle_read_event_rsp(intf, msg); } else { @@ -3458,71 +3579,82 @@ static int handle_new_recv_msg(ipmi_smi_t intf, void ipmi_smi_msg_received(ipmi_smi_t intf, struct ipmi_smi_msg *msg) { - unsigned long flags; + unsigned long flags = 0; /* keep us warning-free. */ int rv; + int run_to_completion; if ((msg->data_size >= 2) && (msg->data[0] == (IPMI_NETFN_APP_REQUEST << 2)) && (msg->data[1] == IPMI_SEND_MSG_CMD) - && (msg->user_data == NULL)) - { - /* This is the local response to a command send, start - the timer for these. The user_data will not be - NULL if this is a response send, and we will let - response sends just go through. */ - - /* Check for errors, if we get certain errors (ones - that mean basically we can try again later), we - ignore them and start the timer. Otherwise we - report the error immediately. */ + && (msg->user_data == NULL)) { + /* + * This is the local response to a command send, start + * the timer for these. The user_data will not be + * NULL if this is a response send, and we will let + * response sends just go through. + */ + + /* + * Check for errors, if we get certain errors (ones + * that mean basically we can try again later), we + * ignore them and start the timer. Otherwise we + * report the error immediately. + */ if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR) && (msg->rsp[2] != IPMI_BUS_ERR) - && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) - { + && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) { int chan = msg->rsp[3] & 0xf; /* Got an error sending the message, handle it. */ - spin_lock_irqsave(&intf->counter_lock, flags); if (chan >= IPMI_MAX_CHANNELS) ; /* This shouldn't happen */ else if ((intf->channels[chan].medium == IPMI_CHANNEL_MEDIUM_8023LAN) || (intf->channels[chan].medium == IPMI_CHANNEL_MEDIUM_ASYNC)) - intf->sent_lan_command_errs++; + ipmi_inc_stat(intf, sent_lan_command_errs); else - intf->sent_ipmb_command_errs++; - spin_unlock_irqrestore(&intf->counter_lock, flags); + ipmi_inc_stat(intf, sent_ipmb_command_errs); intf_err_seq(intf, msg->msgid, msg->rsp[2]); - } else { + } else /* The message was sent, start the timer. */ intf_start_seq_timer(intf, msg->msgid); - } ipmi_free_smi_msg(msg); goto out; } - /* To preserve message order, if the list is not empty, we - tack this message onto the end of the list. */ - spin_lock_irqsave(&intf->waiting_msgs_lock, flags); + /* + * To preserve message order, if the list is not empty, we + * tack this message onto the end of the list. + */ + run_to_completion = intf->run_to_completion; + if (!run_to_completion) + spin_lock_irqsave(&intf->waiting_msgs_lock, flags); if (!list_empty(&intf->waiting_msgs)) { list_add_tail(&msg->link, &intf->waiting_msgs); - spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); + if (!run_to_completion) + spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); goto out; } - spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); - + if (!run_to_completion) + spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); + rv = handle_new_recv_msg(intf, msg); if (rv > 0) { - /* Could not handle the message now, just add it to a - list to handle later. */ - spin_lock_irqsave(&intf->waiting_msgs_lock, flags); + /* + * Could not handle the message now, just add it to a + * list to handle later. + */ + run_to_completion = intf->run_to_completion; + if (!run_to_completion) + spin_lock_irqsave(&intf->waiting_msgs_lock, flags); list_add_tail(&msg->link, &intf->waiting_msgs); - spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); + if (!run_to_completion) + spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); } else if (rv == 0) { ipmi_free_smi_msg(msg); } @@ -3530,6 +3662,7 @@ void ipmi_smi_msg_received(ipmi_smi_t intf, out: return; } +EXPORT_SYMBOL(ipmi_smi_msg_received); void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf) { @@ -3544,7 +3677,7 @@ void ipmi_smi_watchdog_pretimeout(ipmi_smi_t intf) } rcu_read_unlock(); } - +EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout); static struct ipmi_smi_msg * smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, @@ -3552,14 +3685,16 @@ smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, { struct ipmi_smi_msg *smi_msg = ipmi_alloc_smi_msg(); if (!smi_msg) - /* If we can't allocate the message, then just return, we - get 4 retries, so this should be ok. */ + /* + * If we can't allocate the message, then just return, we + * get 4 retries, so this should be ok. + */ return NULL; memcpy(smi_msg->data, recv_msg->msg.data, recv_msg->msg.data_len); smi_msg->data_size = recv_msg->msg.data_len; smi_msg->msgid = STORE_SEQ_IN_MSGID(seq, seqid); - + #ifdef DEBUG_MSGING { int m; @@ -3594,28 +3729,26 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, ent->inuse = 0; msg = ent->recv_msg; list_add_tail(&msg->link, timeouts); - spin_lock(&intf->counter_lock); if (ent->broadcast) - intf->timed_out_ipmb_broadcasts++; + ipmi_inc_stat(intf, timed_out_ipmb_broadcasts); else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE) - intf->timed_out_lan_commands++; + ipmi_inc_stat(intf, timed_out_lan_commands); else - intf->timed_out_ipmb_commands++; - spin_unlock(&intf->counter_lock); + ipmi_inc_stat(intf, timed_out_ipmb_commands); } else { struct ipmi_smi_msg *smi_msg; /* More retries, send again. */ - /* Start with the max timer, set to normal - timer after the message is sent. */ + /* + * Start with the max timer, set to normal timer after + * the message is sent. + */ ent->timeout = MAX_MSG_TIMEOUT; ent->retries_left--; - spin_lock(&intf->counter_lock); if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE) - intf->retransmitted_lan_commands++; + ipmi_inc_stat(intf, retransmitted_lan_commands); else - intf->retransmitted_ipmb_commands++; - spin_unlock(&intf->counter_lock); + ipmi_inc_stat(intf, retransmitted_ipmb_commands); smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot, ent->seqid); @@ -3624,11 +3757,13 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, spin_unlock_irqrestore(&intf->seq_lock, *flags); - /* Send the new message. We send with a zero - * priority. It timed out, I doubt time is - * that critical now, and high priority - * messages are really only for messages to the - * local MC, which don't get resent. */ + /* + * Send the new message. We send with a zero + * priority. It timed out, I doubt time is that + * critical now, and high priority messages are really + * only for messages to the local MC, which don't get + * resent. + */ handlers = intf->handlers; if (handlers) intf->handlers->sender(intf->send_info, @@ -3659,16 +3794,20 @@ static void ipmi_timeout_handler(long timeout_period) list_del(&smi_msg->link); ipmi_free_smi_msg(smi_msg); } else { - /* To preserve message order, quit if we - can't handle a message. */ + /* + * To preserve message order, quit if we + * can't handle a message. + */ break; } } spin_unlock_irqrestore(&intf->waiting_msgs_lock, flags); - /* Go through the seq table and find any messages that - have timed out, putting them in the timeouts - list. */ + /* + * Go through the seq table and find any messages that + * have timed out, putting them in the timeouts + * list. + */ INIT_LIST_HEAD(&timeouts); spin_lock_irqsave(&intf->seq_lock, flags); for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) @@ -3694,8 +3833,7 @@ static void ipmi_timeout_handler(long timeout_period) intf->auto_maintenance_timeout -= timeout_period; if (!intf->maintenance_mode - && (intf->auto_maintenance_timeout <= 0)) - { + && (intf->auto_maintenance_timeout <= 0)) { intf->maintenance_mode_enable = 0; maintenance_mode_update(intf); } @@ -3713,8 +3851,10 @@ static void ipmi_request_event(void) struct ipmi_smi_handlers *handlers; rcu_read_lock(); - /* Called from the timer, no need to check if handlers is - * valid. */ + /* + * Called from the timer, no need to check if handlers is + * valid. + */ list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { /* No event requests when in maintenance mode. */ if (intf->maintenance_mode_enable) @@ -3735,10 +3875,12 @@ static struct timer_list ipmi_timer; /* How many jiffies does it take to get to the timeout time. */ #define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000) -/* Request events from the queue every second (this is the number of - IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the - future, IPMI will add a way to know immediately if an event is in - the queue and this silliness can go away. */ +/* + * Request events from the queue every second (this is the number of + * IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the + * future, IPMI will add a way to know immediately if an event is in + * the queue and this silliness can go away. + */ #define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME)) static atomic_t stop_operation; @@ -3782,6 +3924,7 @@ struct ipmi_smi_msg *ipmi_alloc_smi_msg(void) } return rv; } +EXPORT_SYMBOL(ipmi_alloc_smi_msg); static void free_recv_msg(struct ipmi_recv_msg *msg) { @@ -3789,7 +3932,7 @@ static void free_recv_msg(struct ipmi_recv_msg *msg) kfree(msg); } -struct ipmi_recv_msg *ipmi_alloc_recv_msg(void) +static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void) { struct ipmi_recv_msg *rv; @@ -3808,6 +3951,7 @@ void ipmi_free_recv_msg(struct ipmi_recv_msg *msg) kref_put(&msg->user->refcount, free_user); msg->done(msg); } +EXPORT_SYMBOL(ipmi_free_recv_msg); #ifdef CONFIG_IPMI_PANIC_EVENT @@ -3825,8 +3969,7 @@ static void event_receiver_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) && (msg->msg.netfn == IPMI_NETFN_SENSOR_EVENT_RESPONSE) && (msg->msg.cmd == IPMI_GET_EVENT_RECEIVER_CMD) - && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) - { + && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) { /* A get event receiver command, save it. */ intf->event_receiver = msg->msg.data[1]; intf->event_receiver_lun = msg->msg.data[2] & 0x3; @@ -3838,10 +3981,11 @@ static void device_id_fetcher(ipmi_smi_t intf, struct ipmi_recv_msg *msg) if ((msg->addr.addr_type == IPMI_SYSTEM_INTERFACE_ADDR_TYPE) && (msg->msg.netfn == IPMI_NETFN_APP_RESPONSE) && (msg->msg.cmd == IPMI_GET_DEVICE_ID_CMD) - && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) - { - /* A get device id command, save if we are an event - receiver or generator. */ + && (msg->msg.data[0] == IPMI_CC_NO_ERROR)) { + /* + * A get device id command, save if we are an event + * receiver or generator. + */ intf->local_sel_device = (msg->msg.data[6] >> 2) & 1; intf->local_event_generator = (msg->msg.data[6] >> 5) & 1; } @@ -3874,8 +4018,10 @@ static void send_panic_events(char *str) data[4] = 0x6f; /* Sensor specific, IPMI table 36-1 */ data[5] = 0xa1; /* Runtime stop OEM bytes 2 & 3. */ - /* Put a few breadcrumbs in. Hopefully later we can add more things - to make the panic events more useful. */ + /* + * Put a few breadcrumbs in. Hopefully later we can add more things + * to make the panic events more useful. + */ if (str) { data[3] = str[0]; data[6] = str[1]; @@ -3891,6 +4037,7 @@ static void send_panic_events(char *str) /* Interface is not ready. */ continue; + intf->run_to_completion = 1; /* Send the event announcing the panic. */ intf->handlers->set_run_to_completion(intf->send_info, 1); i_ipmi_request(NULL, @@ -3908,9 +4055,11 @@ static void send_panic_events(char *str) } #ifdef CONFIG_IPMI_PANIC_STRING - /* On every interface, dump a bunch of OEM event holding the - string. */ - if (!str) + /* + * On every interface, dump a bunch of OEM event holding the + * string. + */ + if (!str) return; /* For every registered interface, send the event. */ @@ -3931,11 +4080,13 @@ static void send_panic_events(char *str) */ smp_rmb(); - /* First job here is to figure out where to send the - OEM events. There's no way in IPMI to send OEM - events using an event send command, so we have to - find the SEL to put them in and stick them in - there. */ + /* + * First job here is to figure out where to send the + * OEM events. There's no way in IPMI to send OEM + * events using an event send command, so we have to + * find the SEL to put them in and stick them in + * there. + */ /* Get capabilities from the get device id. */ intf->local_sel_device = 0; @@ -3983,24 +4134,29 @@ static void send_panic_events(char *str) } intf->null_user_handler = NULL; - /* Validate the event receiver. The low bit must not - be 1 (it must be a valid IPMB address), it cannot - be zero, and it must not be my address. */ - if (((intf->event_receiver & 1) == 0) + /* + * Validate the event receiver. The low bit must not + * be 1 (it must be a valid IPMB address), it cannot + * be zero, and it must not be my address. + */ + if (((intf->event_receiver & 1) == 0) && (intf->event_receiver != 0) - && (intf->event_receiver != intf->channels[0].address)) - { - /* The event receiver is valid, send an IPMB - message. */ + && (intf->event_receiver != intf->channels[0].address)) { + /* + * The event receiver is valid, send an IPMB + * message. + */ ipmb = (struct ipmi_ipmb_addr *) &addr; ipmb->addr_type = IPMI_IPMB_ADDR_TYPE; ipmb->channel = 0; /* FIXME - is this right? */ ipmb->lun = intf->event_receiver_lun; ipmb->slave_addr = intf->event_receiver; } else if (intf->local_sel_device) { - /* The event receiver was not valid (or was - me), but I am an SEL device, just dump it - in my SEL. */ + /* + * The event receiver was not valid (or was + * me), but I am an SEL device, just dump it + * in my SEL. + */ si = (struct ipmi_system_interface_addr *) &addr; si->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; si->channel = IPMI_BMC_CHANNEL; @@ -4008,7 +4164,6 @@ static void send_panic_events(char *str) } else continue; /* No where to send the event. */ - msg.netfn = IPMI_NETFN_STORAGE_REQUEST; /* Storage. */ msg.cmd = IPMI_ADD_SEL_ENTRY_CMD; msg.data = data; @@ -4025,8 +4180,10 @@ static void send_panic_events(char *str) data[2] = 0xf0; /* OEM event without timestamp. */ data[3] = intf->channels[0].address; data[4] = j++; /* sequence # */ - /* Always give 11 bytes, so strncpy will fill - it with zeroes for me. */ + /* + * Always give 11 bytes, so strncpy will fill + * it with zeroes for me. + */ strncpy(data+5, p, 11); p += size; @@ -4043,7 +4200,7 @@ static void send_panic_events(char *str) intf->channels[0].lun, 0, 1); /* no retry, and no wait. */ } - } + } #endif /* CONFIG_IPMI_PANIC_STRING */ } #endif /* CONFIG_IPMI_PANIC_EVENT */ @@ -4052,7 +4209,7 @@ static int has_panicked; static int panic_event(struct notifier_block *this, unsigned long event, - void *ptr) + void *ptr) { ipmi_smi_t intf; @@ -4066,6 +4223,7 @@ static int panic_event(struct notifier_block *this, /* Interface is not ready. */ continue; + intf->run_to_completion = 1; intf->handlers->set_run_to_completion(intf->send_info, 1); } @@ -4133,11 +4291,16 @@ static __exit void cleanup_ipmi(void) atomic_notifier_chain_unregister(&panic_notifier_list, &panic_block); - /* This can't be called if any interfaces exist, so no worry about - shutting down the interfaces. */ + /* + * This can't be called if any interfaces exist, so no worry + * about shutting down the interfaces. + */ - /* Tell the timer to stop, then wait for it to stop. This avoids - problems with race conditions removing the timer here. */ + /* + * Tell the timer to stop, then wait for it to stop. This + * avoids problems with race conditions removing the timer + * here. + */ atomic_inc(&stop_operation); del_timer_sync(&ipmi_timer); @@ -4164,31 +4327,6 @@ module_exit(cleanup_ipmi); module_init(ipmi_init_msghandler_mod); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); -MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI interface."); +MODULE_DESCRIPTION("Incoming and outgoing message routing for an IPMI" + " interface."); MODULE_VERSION(IPMI_DRIVER_VERSION); - -EXPORT_SYMBOL(ipmi_create_user); -EXPORT_SYMBOL(ipmi_destroy_user); -EXPORT_SYMBOL(ipmi_get_version); -EXPORT_SYMBOL(ipmi_request_settime); -EXPORT_SYMBOL(ipmi_request_supply_msgs); -EXPORT_SYMBOL(ipmi_poll_interface); -EXPORT_SYMBOL(ipmi_register_smi); -EXPORT_SYMBOL(ipmi_unregister_smi); -EXPORT_SYMBOL(ipmi_register_for_cmd); -EXPORT_SYMBOL(ipmi_unregister_for_cmd); -EXPORT_SYMBOL(ipmi_smi_msg_received); -EXPORT_SYMBOL(ipmi_smi_watchdog_pretimeout); -EXPORT_SYMBOL(ipmi_alloc_smi_msg); -EXPORT_SYMBOL(ipmi_addr_length); -EXPORT_SYMBOL(ipmi_validate_addr); -EXPORT_SYMBOL(ipmi_set_gets_events); -EXPORT_SYMBOL(ipmi_smi_watcher_register); -EXPORT_SYMBOL(ipmi_smi_watcher_unregister); -EXPORT_SYMBOL(ipmi_set_my_address); -EXPORT_SYMBOL(ipmi_get_my_address); -EXPORT_SYMBOL(ipmi_set_my_LUN); -EXPORT_SYMBOL(ipmi_get_my_LUN); -EXPORT_SYMBOL(ipmi_smi_add_proc_entry); -EXPORT_SYMBOL(ipmi_user_set_run_to_completion); -EXPORT_SYMBOL(ipmi_free_recv_msg); diff --git a/drivers/char/ipmi/ipmi_poweroff.c b/drivers/char/ipmi/ipmi_poweroff.c index b86186de7f07..a261bd735dfb 100644 --- a/drivers/char/ipmi/ipmi_poweroff.c +++ b/drivers/char/ipmi/ipmi_poweroff.c @@ -87,7 +87,10 @@ MODULE_PARM_DESC(ifnum_to_use, "The interface number to use for the watchdog " /* parameter definition to allow user to flag power cycle */ module_param(poweroff_powercycle, int, 0644); -MODULE_PARM_DESC(poweroff_powercycle, " Set to non-zero to enable power cycle instead of power down. Power cycle is contingent on hardware support, otherwise it defaults back to power down."); +MODULE_PARM_DESC(poweroff_powercycle, + " Set to non-zero to enable power cycle instead of power" + " down. Power cycle is contingent on hardware support," + " otherwise it defaults back to power down."); /* Stuff from the get device id command. */ static unsigned int mfg_id; @@ -95,22 +98,25 @@ static unsigned int prod_id; static unsigned char capabilities; static unsigned char ipmi_version; -/* We use our own messages for this operation, we don't let the system - allocate them, since we may be in a panic situation. The whole - thing is single-threaded, anyway, so multiple messages are not - required. */ +/* + * We use our own messages for this operation, we don't let the system + * allocate them, since we may be in a panic situation. The whole + * thing is single-threaded, anyway, so multiple messages are not + * required. + */ +static atomic_t dummy_count = ATOMIC_INIT(0); static void dummy_smi_free(struct ipmi_smi_msg *msg) { + atomic_dec(&dummy_count); } static void dummy_recv_free(struct ipmi_recv_msg *msg) { + atomic_dec(&dummy_count); } -static struct ipmi_smi_msg halt_smi_msg = -{ +static struct ipmi_smi_msg halt_smi_msg = { .done = dummy_smi_free }; -static struct ipmi_recv_msg halt_recv_msg = -{ +static struct ipmi_recv_msg halt_recv_msg = { .done = dummy_recv_free }; @@ -127,8 +133,7 @@ static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data) complete(comp); } -static struct ipmi_user_hndl ipmi_poweroff_handler = -{ +static struct ipmi_user_hndl ipmi_poweroff_handler = { .ipmi_recv_hndl = receive_handler }; @@ -152,17 +157,28 @@ static int ipmi_request_wait_for_response(ipmi_user_t user, return halt_recv_msg.msg.data[0]; } -/* We are in run-to-completion mode, no completion is desired. */ +/* Wait for message to complete, spinning. */ static int ipmi_request_in_rc_mode(ipmi_user_t user, struct ipmi_addr *addr, struct kernel_ipmi_msg *send_msg) { int rv; + atomic_set(&dummy_count, 2); rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL, &halt_smi_msg, &halt_recv_msg, 0); - if (rv) + if (rv) { + atomic_set(&dummy_count, 0); return rv; + } + + /* + * Spin until our message is done. + */ + while (atomic_read(&dummy_count) > 0) { + ipmi_poll_interface(user); + cpu_relax(); + } return halt_recv_msg.msg.data[0]; } @@ -184,47 +200,47 @@ static int ipmi_request_in_rc_mode(ipmi_user_t user, static void (*atca_oem_poweroff_hook)(ipmi_user_t user); -static void pps_poweroff_atca (ipmi_user_t user) +static void pps_poweroff_atca(ipmi_user_t user) { - struct ipmi_system_interface_addr smi_addr; - struct kernel_ipmi_msg send_msg; - int rv; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; - - printk(KERN_INFO PFX "PPS powerdown hook used"); - - send_msg.netfn = IPMI_NETFN_OEM; - send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART; - send_msg.data = IPMI_ATCA_PPS_IANA; - send_msg.data_len = 3; - rv = ipmi_request_in_rc_mode(user, - (struct ipmi_addr *) &smi_addr, - &send_msg); - if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { - printk(KERN_ERR PFX "Unable to send ATCA ," - " IPMI error 0x%x\n", rv); - } + struct ipmi_system_interface_addr smi_addr; + struct kernel_ipmi_msg send_msg; + int rv; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; + + printk(KERN_INFO PFX "PPS powerdown hook used"); + + send_msg.netfn = IPMI_NETFN_OEM; + send_msg.cmd = IPMI_ATCA_PPS_GRACEFUL_RESTART; + send_msg.data = IPMI_ATCA_PPS_IANA; + send_msg.data_len = 3; + rv = ipmi_request_in_rc_mode(user, + (struct ipmi_addr *) &smi_addr, + &send_msg); + if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { + printk(KERN_ERR PFX "Unable to send ATCA ," + " IPMI error 0x%x\n", rv); + } return; } -static int ipmi_atca_detect (ipmi_user_t user) +static int ipmi_atca_detect(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[1]; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; /* * Use get address info to check and see if we are ATCA @@ -238,28 +254,30 @@ static int ipmi_atca_detect (ipmi_user_t user) (struct ipmi_addr *) &smi_addr, &send_msg); - printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", mfg_id, prod_id); - if((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID) - && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) { - printk(KERN_INFO PFX "Installing Pigeon Point Systems Poweroff Hook\n"); + printk(KERN_INFO PFX "ATCA Detect mfg 0x%X prod 0x%X\n", + mfg_id, prod_id); + if ((mfg_id == IPMI_MOTOROLA_MANUFACTURER_ID) + && (prod_id == IPMI_MOTOROLA_PPS_IPMC_PRODUCT_ID)) { + printk(KERN_INFO PFX + "Installing Pigeon Point Systems Poweroff Hook\n"); atca_oem_poweroff_hook = pps_poweroff_atca; } return !rv; } -static void ipmi_poweroff_atca (ipmi_user_t user) +static void ipmi_poweroff_atca(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[4]; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; printk(KERN_INFO PFX "Powering down via ATCA power command\n"); @@ -273,23 +291,24 @@ static void ipmi_poweroff_atca (ipmi_user_t user) data[2] = 0; /* Power Level */ data[3] = 0; /* Don't change saved presets */ send_msg.data = data; - send_msg.data_len = sizeof (data); + send_msg.data_len = sizeof(data); rv = ipmi_request_in_rc_mode(user, (struct ipmi_addr *) &smi_addr, &send_msg); - /** At this point, the system may be shutting down, and most - ** serial drivers (if used) will have interrupts turned off - ** it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE - ** return code - **/ - if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { + /* + * At this point, the system may be shutting down, and most + * serial drivers (if used) will have interrupts turned off + * it may be better to ignore IPMI_UNKNOWN_ERR_COMPLETION_CODE + * return code + */ + if (rv && rv != IPMI_UNKNOWN_ERR_COMPLETION_CODE) { printk(KERN_ERR PFX "Unable to send ATCA powerdown message," " IPMI error 0x%x\n", rv); goto out; } - if(atca_oem_poweroff_hook) - return atca_oem_poweroff_hook(user); + if (atca_oem_poweroff_hook) + atca_oem_poweroff_hook(user); out: return; } @@ -310,13 +329,13 @@ static void ipmi_poweroff_atca (ipmi_user_t user) #define IPMI_CPI1_PRODUCT_ID 0x000157 #define IPMI_CPI1_MANUFACTURER_ID 0x0108 -static int ipmi_cpi1_detect (ipmi_user_t user) +static int ipmi_cpi1_detect(ipmi_user_t user) { return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID) && (prod_id == IPMI_CPI1_PRODUCT_ID)); } -static void ipmi_poweroff_cpi1 (ipmi_user_t user) +static void ipmi_poweroff_cpi1(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct ipmi_ipmb_addr ipmb_addr; @@ -328,12 +347,12 @@ static void ipmi_poweroff_cpi1 (ipmi_user_t user) unsigned char aer_addr; unsigned char aer_lun; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; printk(KERN_INFO PFX "Powering down via CPI1 power command\n"); @@ -425,7 +444,7 @@ static void ipmi_poweroff_cpi1 (ipmi_user_t user) */ #define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} -static int ipmi_dell_chassis_detect (ipmi_user_t user) +static int ipmi_dell_chassis_detect(ipmi_user_t user) { const char ipmi_version_major = ipmi_version & 0xF; const char ipmi_version_minor = (ipmi_version >> 4) & 0xF; @@ -444,25 +463,25 @@ static int ipmi_dell_chassis_detect (ipmi_user_t user) #define IPMI_NETFN_CHASSIS_REQUEST 0 #define IPMI_CHASSIS_CONTROL_CMD 0x02 -static int ipmi_chassis_detect (ipmi_user_t user) +static int ipmi_chassis_detect(ipmi_user_t user) { /* Chassis support, use it. */ return (capabilities & 0x80); } -static void ipmi_poweroff_chassis (ipmi_user_t user) +static void ipmi_poweroff_chassis(ipmi_user_t user) { struct ipmi_system_interface_addr smi_addr; struct kernel_ipmi_msg send_msg; int rv; unsigned char data[1]; - /* - * Configure IPMI address for local access - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + /* + * Configure IPMI address for local access + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; powercyclefailed: printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n", @@ -525,15 +544,13 @@ static struct poweroff_function poweroff_functions[] = { /* Called on a powerdown request. */ -static void ipmi_poweroff_function (void) +static void ipmi_poweroff_function(void) { if (!ready) return; /* Use run-to-completion mode, since interrupts may be off. */ - ipmi_user_set_run_to_completion(ipmi_user, 1); specific_poweroff_func(ipmi_user); - ipmi_user_set_run_to_completion(ipmi_user, 0); } /* Wait for an IPMI interface to be installed, the first one installed @@ -561,13 +578,13 @@ static void ipmi_po_new_smi(int if_num, struct device *device) ipmi_ifnum = if_num; - /* - * Do a get device ide and store some results, since this is + /* + * Do a get device ide and store some results, since this is * used by several functions. - */ - smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; - smi_addr.channel = IPMI_BMC_CHANNEL; - smi_addr.lun = 0; + */ + smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + smi_addr.channel = IPMI_BMC_CHANNEL; + smi_addr.lun = 0; send_msg.netfn = IPMI_NETFN_APP_REQUEST; send_msg.cmd = IPMI_GET_DEVICE_ID_CMD; @@ -632,8 +649,7 @@ static void ipmi_po_smi_gone(int if_num) pm_power_off = old_poweroff_func; } -static struct ipmi_smi_watcher smi_watcher = -{ +static struct ipmi_smi_watcher smi_watcher = { .owner = THIS_MODULE, .new_smi = ipmi_po_new_smi, .smi_gone = ipmi_po_smi_gone @@ -675,12 +691,12 @@ static struct ctl_table_header *ipmi_table_header; /* * Startup and shutdown functions. */ -static int ipmi_poweroff_init (void) +static int ipmi_poweroff_init(void) { int rv; - printk (KERN_INFO "Copyright (C) 2004 MontaVista Software -" - " IPMI Powerdown via sys_reboot.\n"); + printk(KERN_INFO "Copyright (C) 2004 MontaVista Software -" + " IPMI Powerdown via sys_reboot.\n"); if (poweroff_powercycle) printk(KERN_INFO PFX "Power cycle is enabled.\n"); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 4f560d0bb808..5a5455585c1d 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -80,7 +80,7 @@ #define SI_USEC_PER_JIFFY (1000000/HZ) #define SI_TIMEOUT_JIFFIES (SI_TIMEOUT_TIME_USEC/SI_USEC_PER_JIFFY) #define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a - short timeout */ + short timeout */ /* Bit for BMC global enables. */ #define IPMI_BMC_RCV_MSG_INTR 0x01 @@ -114,14 +114,61 @@ static char *si_to_str[] = { "kcs", "smic", "bt" }; #define DEVICE_NAME "ipmi_si" -static struct device_driver ipmi_driver = -{ +static struct device_driver ipmi_driver = { .name = DEVICE_NAME, .bus = &platform_bus_type }; -struct smi_info -{ + +/* + * Indexes into stats[] in smi_info below. + */ +enum si_stat_indexes { + /* + * Number of times the driver requested a timer while an operation + * was in progress. + */ + SI_STAT_short_timeouts = 0, + + /* + * Number of times the driver requested a timer while nothing was in + * progress. + */ + SI_STAT_long_timeouts, + + /* Number of times the interface was idle while being polled. */ + SI_STAT_idles, + + /* Number of interrupts the driver handled. */ + SI_STAT_interrupts, + + /* Number of time the driver got an ATTN from the hardware. */ + SI_STAT_attentions, + + /* Number of times the driver requested flags from the hardware. */ + SI_STAT_flag_fetches, + + /* Number of times the hardware didn't follow the state machine. */ + SI_STAT_hosed_count, + + /* Number of completed messages. */ + SI_STAT_complete_transactions, + + /* Number of IPMI events received from the hardware. */ + SI_STAT_events, + + /* Number of watchdog pretimeouts. */ + SI_STAT_watchdog_pretimeouts, + + /* Number of asyncronous messages received. */ + SI_STAT_incoming_messages, + + + /* This *must* remain last, add new values above this. */ + SI_NUM_STATS +}; + +struct smi_info { int intf_num; ipmi_smi_t intf; struct si_sm_data *si_sm; @@ -134,8 +181,10 @@ struct smi_info struct ipmi_smi_msg *curr_msg; enum si_intf_state si_state; - /* Used to handle the various types of I/O that can occur with - IPMI */ + /* + * Used to handle the various types of I/O that can occur with + * IPMI + */ struct si_sm_io io; int (*io_setup)(struct smi_info *info); void (*io_cleanup)(struct smi_info *info); @@ -146,15 +195,18 @@ struct smi_info void (*addr_source_cleanup)(struct smi_info *info); void *addr_source_data; - /* Per-OEM handler, called from handle_flags(). - Returns 1 when handle_flags() needs to be re-run - or 0 indicating it set si_state itself. - */ + /* + * Per-OEM handler, called from handle_flags(). Returns 1 + * when handle_flags() needs to be re-run or 0 indicating it + * set si_state itself. + */ int (*oem_data_avail_handler)(struct smi_info *smi_info); - /* Flags from the last GET_MSG_FLAGS command, used when an ATTN - is set to hold the flags until we are done handling everything - from the flags. */ + /* + * Flags from the last GET_MSG_FLAGS command, used when an ATTN + * is set to hold the flags until we are done handling everything + * from the flags. + */ #define RECEIVE_MSG_AVAIL 0x01 #define EVENT_MSG_BUFFER_FULL 0x02 #define WDT_PRE_TIMEOUT_INT 0x08 @@ -162,25 +214,31 @@ struct smi_info #define OEM1_DATA_AVAIL 0x40 #define OEM2_DATA_AVAIL 0x80 #define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \ - OEM1_DATA_AVAIL | \ - OEM2_DATA_AVAIL) + OEM1_DATA_AVAIL | \ + OEM2_DATA_AVAIL) unsigned char msg_flags; - /* If set to true, this will request events the next time the - state machine is idle. */ + /* + * If set to true, this will request events the next time the + * state machine is idle. + */ atomic_t req_events; - /* If true, run the state machine to completion on every send - call. Generally used after a panic to make sure stuff goes - out. */ + /* + * If true, run the state machine to completion on every send + * call. Generally used after a panic to make sure stuff goes + * out. + */ int run_to_completion; /* The I/O port of an SI interface. */ int port; - /* The space between start addresses of the two ports. For - instance, if the first port is 0xca2 and the spacing is 4, then - the second port is 0xca6. */ + /* + * The space between start addresses of the two ports. For + * instance, if the first port is 0xca2 and the spacing is 4, then + * the second port is 0xca6. + */ unsigned int spacing; /* zero if no irq; */ @@ -195,10 +253,12 @@ struct smi_info /* Used to gracefully stop the timer without race conditions. */ atomic_t stop_operation; - /* The driver will disable interrupts when it gets into a - situation where it cannot handle messages due to lack of - memory. Once that situation clears up, it will re-enable - interrupts. */ + /* + * The driver will disable interrupts when it gets into a + * situation where it cannot handle messages due to lack of + * memory. Once that situation clears up, it will re-enable + * interrupts. + */ int interrupt_disabled; /* From the get device id response... */ @@ -208,33 +268,28 @@ struct smi_info struct device *dev; struct platform_device *pdev; - /* True if we allocated the device, false if it came from - * someplace else (like PCI). */ + /* + * True if we allocated the device, false if it came from + * someplace else (like PCI). + */ int dev_registered; /* Slave address, could be reported from DMI. */ unsigned char slave_addr; /* Counters and things for the proc filesystem. */ - spinlock_t count_lock; - unsigned long short_timeouts; - unsigned long long_timeouts; - unsigned long timeout_restarts; - unsigned long idles; - unsigned long interrupts; - unsigned long attentions; - unsigned long flag_fetches; - unsigned long hosed_count; - unsigned long complete_transactions; - unsigned long events; - unsigned long watchdog_pretimeouts; - unsigned long incoming_messages; - - struct task_struct *thread; + atomic_t stats[SI_NUM_STATS]; + + struct task_struct *thread; struct list_head link; }; +#define smi_inc_stat(smi, stat) \ + atomic_inc(&(smi)->stats[SI_STAT_ ## stat]) +#define smi_get_stat(smi, stat) \ + ((unsigned int) atomic_read(&(smi)->stats[SI_STAT_ ## stat])) + #define SI_MAX_PARMS 4 static int force_kipmid[SI_MAX_PARMS]; @@ -246,7 +301,7 @@ static int try_smi_init(struct smi_info *smi); static void cleanup_one_si(struct smi_info *to_clean); static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list); -static int register_xaction_notifier(struct notifier_block * nb) +static int register_xaction_notifier(struct notifier_block *nb) { return atomic_notifier_chain_register(&xaction_notifier_list, nb); } @@ -255,7 +310,7 @@ static void deliver_recv_msg(struct smi_info *smi_info, struct ipmi_smi_msg *msg) { /* Deliver the message to the upper layer with the lock - released. */ + released. */ spin_unlock(&(smi_info->si_lock)); ipmi_smi_msg_received(smi_info->intf, msg); spin_lock(&(smi_info->si_lock)); @@ -287,9 +342,12 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) struct timeval t; #endif - /* No need to save flags, we aleady have interrupts off and we - already hold the SMI lock. */ - spin_lock(&(smi_info->msg_lock)); + /* + * No need to save flags, we aleady have interrupts off and we + * already hold the SMI lock. + */ + if (!smi_info->run_to_completion) + spin_lock(&(smi_info->msg_lock)); /* Pick the high priority queue first. */ if (!list_empty(&(smi_info->hp_xmit_msgs))) { @@ -310,7 +368,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) link); #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif err = atomic_notifier_call_chain(&xaction_notifier_list, 0, smi_info); @@ -322,14 +380,14 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) smi_info->si_sm, smi_info->curr_msg->data, smi_info->curr_msg->data_size); - if (err) { + if (err) return_hosed_msg(smi_info, err); - } rv = SI_SM_CALL_WITHOUT_DELAY; } - out: - spin_unlock(&(smi_info->msg_lock)); + out: + if (!smi_info->run_to_completion) + spin_unlock(&(smi_info->msg_lock)); return rv; } @@ -338,8 +396,10 @@ static void start_enable_irq(struct smi_info *smi_info) { unsigned char msg[2]; - /* If we are enabling interrupts, we have to tell the - BMC to use them. */ + /* + * If we are enabling interrupts, we have to tell the + * BMC to use them. + */ msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD; @@ -371,10 +431,12 @@ static void start_clear_flags(struct smi_info *smi_info) smi_info->si_state = SI_CLEARING_FLAGS; } -/* When we have a situtaion where we run out of memory and cannot - allocate messages, we just leave them in the BMC and run the system - polled until we can allocate some memory. Once we have some - memory, we will re-enable the interrupt. */ +/* + * When we have a situtaion where we run out of memory and cannot + * allocate messages, we just leave them in the BMC and run the system + * polled until we can allocate some memory. Once we have some + * memory, we will re-enable the interrupt. + */ static inline void disable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { @@ -396,9 +458,7 @@ static void handle_flags(struct smi_info *smi_info) retry: if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) { /* Watchdog pre-timeout */ - spin_lock(&smi_info->count_lock); - smi_info->watchdog_pretimeouts++; - spin_unlock(&smi_info->count_lock); + smi_inc_stat(smi_info, watchdog_pretimeouts); start_clear_flags(smi_info); smi_info->msg_flags &= ~WDT_PRE_TIMEOUT_INT; @@ -444,12 +504,11 @@ static void handle_flags(struct smi_info *smi_info) smi_info->curr_msg->data_size); smi_info->si_state = SI_GETTING_EVENTS; } else if (smi_info->msg_flags & OEM_DATA_AVAIL && - smi_info->oem_data_avail_handler) { + smi_info->oem_data_avail_handler) { if (smi_info->oem_data_avail_handler(smi_info)) goto retry; - } else { + } else smi_info->si_state = SI_NORMAL; - } } static void handle_transaction_done(struct smi_info *smi_info) @@ -459,7 +518,7 @@ static void handle_transaction_done(struct smi_info *smi_info) struct timeval t; do_gettimeofday(&t); - printk("**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Done: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif switch (smi_info->si_state) { case SI_NORMAL: @@ -472,9 +531,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; deliver_recv_msg(smi_info, msg); @@ -488,12 +549,13 @@ static void handle_transaction_done(struct smi_info *smi_info) /* We got the flags from the SMI, now handle them. */ len = smi_info->handlers->get_result(smi_info->si_sm, msg, 4); if (msg[2] != 0) { - /* Error fetching flags, just give up for - now. */ + /* Error fetching flags, just give up for now. */ smi_info->si_state = SI_NORMAL; } else if (len < 4) { - /* Hmm, no flags. That's technically illegal, but - don't use uninitialized data. */ + /* + * Hmm, no flags. That's technically illegal, but + * don't use uninitialized data. + */ smi_info->si_state = SI_NORMAL; } else { smi_info->msg_flags = msg[3]; @@ -530,9 +592,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; if (msg->rsp[2] != 0) { @@ -543,14 +607,14 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->msg_flags &= ~EVENT_MSG_BUFFER_FULL; handle_flags(smi_info); } else { - spin_lock(&smi_info->count_lock); - smi_info->events++; - spin_unlock(&smi_info->count_lock); - - /* Do this before we deliver the message - because delivering the message releases the - lock and something else can mess with the - state. */ + smi_inc_stat(smi_info, events); + + /* + * Do this before we deliver the message + * because delivering the message releases the + * lock and something else can mess with the + * state. + */ handle_flags(smi_info); deliver_recv_msg(smi_info, msg); @@ -566,9 +630,11 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->curr_msg->rsp, IPMI_MAX_MSG_LENGTH); - /* Do this here becase deliver_recv_msg() releases the - lock, and a new message can be put in during the - time the lock is released. */ + /* + * Do this here becase deliver_recv_msg() releases the + * lock, and a new message can be put in during the + * time the lock is released. + */ msg = smi_info->curr_msg; smi_info->curr_msg = NULL; if (msg->rsp[2] != 0) { @@ -579,14 +645,14 @@ static void handle_transaction_done(struct smi_info *smi_info) smi_info->msg_flags &= ~RECEIVE_MSG_AVAIL; handle_flags(smi_info); } else { - spin_lock(&smi_info->count_lock); - smi_info->incoming_messages++; - spin_unlock(&smi_info->count_lock); - - /* Do this before we deliver the message - because delivering the message releases the - lock and something else can mess with the - state. */ + smi_inc_stat(smi_info, incoming_messages); + + /* + * Do this before we deliver the message + * because delivering the message releases the + * lock and something else can mess with the + * state. + */ handle_flags(smi_info); deliver_recv_msg(smi_info, msg); @@ -674,69 +740,70 @@ static void handle_transaction_done(struct smi_info *smi_info) } } -/* Called on timeouts and events. Timeouts should pass the elapsed - time, interrupts should pass in zero. Must be called with - si_lock held and interrupts disabled. */ +/* + * Called on timeouts and events. Timeouts should pass the elapsed + * time, interrupts should pass in zero. Must be called with + * si_lock held and interrupts disabled. + */ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, int time) { enum si_sm_result si_sm_result; restart: - /* There used to be a loop here that waited a little while - (around 25us) before giving up. That turned out to be - pointless, the minimum delays I was seeing were in the 300us - range, which is far too long to wait in an interrupt. So - we just run until the state machine tells us something - happened or it needs a delay. */ + /* + * There used to be a loop here that waited a little while + * (around 25us) before giving up. That turned out to be + * pointless, the minimum delays I was seeing were in the 300us + * range, which is far too long to wait in an interrupt. So + * we just run until the state machine tells us something + * happened or it needs a delay. + */ si_sm_result = smi_info->handlers->event(smi_info->si_sm, time); time = 0; while (si_sm_result == SI_SM_CALL_WITHOUT_DELAY) - { si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); - } - if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) - { - spin_lock(&smi_info->count_lock); - smi_info->complete_transactions++; - spin_unlock(&smi_info->count_lock); + if (si_sm_result == SI_SM_TRANSACTION_COMPLETE) { + smi_inc_stat(smi_info, complete_transactions); handle_transaction_done(smi_info); si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); - } - else if (si_sm_result == SI_SM_HOSED) - { - spin_lock(&smi_info->count_lock); - smi_info->hosed_count++; - spin_unlock(&smi_info->count_lock); + } else if (si_sm_result == SI_SM_HOSED) { + smi_inc_stat(smi_info, hosed_count); - /* Do the before return_hosed_msg, because that - releases the lock. */ + /* + * Do the before return_hosed_msg, because that + * releases the lock. + */ smi_info->si_state = SI_NORMAL; if (smi_info->curr_msg != NULL) { - /* If we were handling a user message, format - a response to send to the upper layer to - tell it about the error. */ + /* + * If we were handling a user message, format + * a response to send to the upper layer to + * tell it about the error. + */ return_hosed_msg(smi_info, IPMI_ERR_UNSPECIFIED); } si_sm_result = smi_info->handlers->event(smi_info->si_sm, 0); } - /* We prefer handling attn over new messages. */ - if (si_sm_result == SI_SM_ATTN) - { + /* + * We prefer handling attn over new messages. But don't do + * this if there is not yet an upper layer to handle anything. + */ + if (likely(smi_info->intf) && si_sm_result == SI_SM_ATTN) { unsigned char msg[2]; - spin_lock(&smi_info->count_lock); - smi_info->attentions++; - spin_unlock(&smi_info->count_lock); + smi_inc_stat(smi_info, attentions); - /* Got a attn, send down a get message flags to see - what's causing it. It would be better to handle - this in the upper layer, but due to the way - interrupts work with the SMI, that's not really - possible. */ + /* + * Got a attn, send down a get message flags to see + * what's causing it. It would be better to handle + * this in the upper layer, but due to the way + * interrupts work with the SMI, that's not really + * possible. + */ msg[0] = (IPMI_NETFN_APP_REQUEST << 2); msg[1] = IPMI_GET_MSG_FLAGS_CMD; @@ -748,20 +815,19 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, /* If we are currently idle, try to start the next message. */ if (si_sm_result == SI_SM_IDLE) { - spin_lock(&smi_info->count_lock); - smi_info->idles++; - spin_unlock(&smi_info->count_lock); + smi_inc_stat(smi_info, idles); si_sm_result = start_next_msg(smi_info); if (si_sm_result != SI_SM_IDLE) goto restart; - } + } if ((si_sm_result == SI_SM_IDLE) - && (atomic_read(&smi_info->req_events))) - { - /* We are idle and the upper layer requested that I fetch - events, so do so. */ + && (atomic_read(&smi_info->req_events))) { + /* + * We are idle and the upper layer requested that I fetch + * events, so do so. + */ atomic_set(&smi_info->req_events, 0); smi_info->curr_msg = ipmi_alloc_smi_msg(); @@ -803,56 +869,50 @@ static void sender(void *send_info, return; } - spin_lock_irqsave(&(smi_info->msg_lock), flags); #ifdef DEBUG_TIMING do_gettimeofday(&t); printk("**Enqueue: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif if (smi_info->run_to_completion) { - /* If we are running to completion, then throw it in - the list and run transactions until everything is - clear. Priority doesn't matter here. */ + /* + * If we are running to completion, then throw it in + * the list and run transactions until everything is + * clear. Priority doesn't matter here. + */ + + /* + * Run to completion means we are single-threaded, no + * need for locks. + */ list_add_tail(&(msg->link), &(smi_info->xmit_msgs)); - /* We have to release the msg lock and claim the smi - lock in this case, because of race conditions. */ - spin_unlock_irqrestore(&(smi_info->msg_lock), flags); - - spin_lock_irqsave(&(smi_info->si_lock), flags); result = smi_event_handler(smi_info, 0); while (result != SI_SM_IDLE) { udelay(SI_SHORT_TIMEOUT_USEC); result = smi_event_handler(smi_info, SI_SHORT_TIMEOUT_USEC); } - spin_unlock_irqrestore(&(smi_info->si_lock), flags); return; - } else { - if (priority > 0) { - list_add_tail(&(msg->link), &(smi_info->hp_xmit_msgs)); - } else { - list_add_tail(&(msg->link), &(smi_info->xmit_msgs)); - } } - spin_unlock_irqrestore(&(smi_info->msg_lock), flags); - spin_lock_irqsave(&(smi_info->si_lock), flags); - if ((smi_info->si_state == SI_NORMAL) - && (smi_info->curr_msg == NULL)) - { + spin_lock_irqsave(&smi_info->msg_lock, flags); + if (priority > 0) + list_add_tail(&msg->link, &smi_info->hp_xmit_msgs); + else + list_add_tail(&msg->link, &smi_info->xmit_msgs); + spin_unlock_irqrestore(&smi_info->msg_lock, flags); + + spin_lock_irqsave(&smi_info->si_lock, flags); + if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) start_next_msg(smi_info); - } - spin_unlock_irqrestore(&(smi_info->si_lock), flags); + spin_unlock_irqrestore(&smi_info->si_lock, flags); } static void set_run_to_completion(void *send_info, int i_run_to_completion) { struct smi_info *smi_info = send_info; enum si_sm_result result; - unsigned long flags; - - spin_lock_irqsave(&(smi_info->si_lock), flags); smi_info->run_to_completion = i_run_to_completion; if (i_run_to_completion) { @@ -863,8 +923,6 @@ static void set_run_to_completion(void *send_info, int i_run_to_completion) SI_SHORT_TIMEOUT_USEC); } } - - spin_unlock_irqrestore(&(smi_info->si_lock), flags); } static int ipmi_thread(void *data) @@ -878,9 +936,8 @@ static int ipmi_thread(void *data) spin_lock_irqsave(&(smi_info->si_lock), flags); smi_result = smi_event_handler(smi_info, 0); spin_unlock_irqrestore(&(smi_info->si_lock), flags); - if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { - /* do nothing */ - } + if (smi_result == SI_SM_CALL_WITHOUT_DELAY) + ; /* do nothing */ else if (smi_result == SI_SM_CALL_WITH_DELAY) schedule(); else @@ -931,7 +988,7 @@ static void smi_timeout(unsigned long data) spin_lock_irqsave(&(smi_info->si_lock), flags); #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Timer: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif jiffies_now = jiffies; time_diff = (((long)jiffies_now - (long)smi_info->last_timeout_jiffies) @@ -945,23 +1002,19 @@ static void smi_timeout(unsigned long data) if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { /* Running with interrupts, only do long timeouts. */ smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; - spin_lock_irqsave(&smi_info->count_lock, flags); - smi_info->long_timeouts++; - spin_unlock_irqrestore(&smi_info->count_lock, flags); + smi_inc_stat(smi_info, long_timeouts); goto do_add_timer; } - /* If the state machine asks for a short delay, then shorten - the timer timeout. */ + /* + * If the state machine asks for a short delay, then shorten + * the timer timeout. + */ if (smi_result == SI_SM_CALL_WITH_DELAY) { - spin_lock_irqsave(&smi_info->count_lock, flags); - smi_info->short_timeouts++; - spin_unlock_irqrestore(&smi_info->count_lock, flags); + smi_inc_stat(smi_info, short_timeouts); smi_info->si_timer.expires = jiffies + 1; } else { - spin_lock_irqsave(&smi_info->count_lock, flags); - smi_info->long_timeouts++; - spin_unlock_irqrestore(&smi_info->count_lock, flags); + smi_inc_stat(smi_info, long_timeouts); smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; } @@ -979,13 +1032,11 @@ static irqreturn_t si_irq_handler(int irq, void *data) spin_lock_irqsave(&(smi_info->si_lock), flags); - spin_lock(&smi_info->count_lock); - smi_info->interrupts++; - spin_unlock(&smi_info->count_lock); + smi_inc_stat(smi_info, interrupts); #ifdef DEBUG_TIMING do_gettimeofday(&t); - printk("**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); + printk(KERN_DEBUG "**Interrupt: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif smi_event_handler(smi_info, 0); spin_unlock_irqrestore(&(smi_info->si_lock), flags); @@ -1028,7 +1079,7 @@ static int smi_start_processing(void *send_info, * The BT interface is efficient enough to not need a thread, * and there is no need for a thread if we have interrupts. */ - else if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) + else if ((new_smi->si_type != SI_BT) && (!new_smi->irq)) enable = 1; if (enable) { @@ -1054,8 +1105,7 @@ static void set_maintenance_mode(void *send_info, int enable) atomic_set(&smi_info->req_events, 0); } -static struct ipmi_smi_handlers handlers = -{ +static struct ipmi_smi_handlers handlers = { .owner = THIS_MODULE, .start_processing = smi_start_processing, .sender = sender, @@ -1065,8 +1115,10 @@ static struct ipmi_smi_handlers handlers = .poll = poll, }; -/* There can be 4 IO ports passed in (with or without IRQs), 4 addresses, - a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */ +/* + * There can be 4 IO ports passed in (with or without IRQs), 4 addresses, + * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS. + */ static LIST_HEAD(smi_infos); static DEFINE_MUTEX(smi_infos_lock); @@ -1257,10 +1309,9 @@ static void port_cleanup(struct smi_info *info) int idx; if (addr) { - for (idx = 0; idx < info->io_size; idx++) { + for (idx = 0; idx < info->io_size; idx++) release_region(addr + idx * info->io.regspacing, info->io.regsize); - } } } @@ -1274,8 +1325,10 @@ static int port_setup(struct smi_info *info) info->io_cleanup = port_cleanup; - /* Figure out the actual inb/inw/inl/etc routine to use based - upon the register size. */ + /* + * Figure out the actual inb/inw/inl/etc routine to use based + * upon the register size. + */ switch (info->io.regsize) { case 1: info->io.inputb = port_inb; @@ -1290,17 +1343,18 @@ static int port_setup(struct smi_info *info) info->io.outputb = port_outl; break; default: - printk("ipmi_si: Invalid register size: %d\n", + printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n", info->io.regsize); return -EINVAL; } - /* Some BIOSes reserve disjoint I/O regions in their ACPI + /* + * Some BIOSes reserve disjoint I/O regions in their ACPI * tables. This causes problems when trying to register the * entire I/O region. Therefore we must register each I/O * port separately. */ - for (idx = 0; idx < info->io_size; idx++) { + for (idx = 0; idx < info->io_size; idx++) { if (request_region(addr + idx * info->io.regspacing, info->io.regsize, DEVICE_NAME) == NULL) { /* Undo allocations */ @@ -1388,8 +1442,10 @@ static int mem_setup(struct smi_info *info) info->io_cleanup = mem_cleanup; - /* Figure out the actual readb/readw/readl/etc routine to use based - upon the register size. */ + /* + * Figure out the actual readb/readw/readl/etc routine to use based + * upon the register size. + */ switch (info->io.regsize) { case 1: info->io.inputb = intf_mem_inb; @@ -1410,16 +1466,18 @@ static int mem_setup(struct smi_info *info) break; #endif default: - printk("ipmi_si: Invalid register size: %d\n", + printk(KERN_WARNING "ipmi_si: Invalid register size: %d\n", info->io.regsize); return -EINVAL; } - /* Calculate the total amount of memory to claim. This is an + /* + * Calculate the total amount of memory to claim. This is an * unusual looking calculation, but it avoids claiming any * more memory than it has to. It will claim everything * between the first address to the end of the last full - * register. */ + * register. + */ mapsize = ((info->io_size * info->io.regspacing) - (info->io.regspacing - info->io.regsize)); @@ -1749,9 +1807,11 @@ static __devinit void hardcode_find_bmc(void) #include <linux/acpi.h> -/* Once we get an ACPI failure, we don't try any more, because we go - through the tables sequentially. Once we don't find a table, there - are no more. */ +/* + * Once we get an ACPI failure, we don't try any more, because we go + * through the tables sequentially. Once we don't find a table, there + * are no more. + */ static int acpi_failure; /* For GPE-type interrupts. */ @@ -1765,9 +1825,7 @@ static u32 ipmi_acpi_gpe(void *context) spin_lock_irqsave(&(smi_info->si_lock), flags); - spin_lock(&smi_info->count_lock); - smi_info->interrupts++; - spin_unlock(&smi_info->count_lock); + smi_inc_stat(smi_info, interrupts); #ifdef DEBUG_TIMING do_gettimeofday(&t); @@ -1816,7 +1874,8 @@ static int acpi_gpe_irq_setup(struct smi_info *info) /* * Defined at - * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf + * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/ + * Docs/TechPapers/IA64/hpspmi.pdf */ struct SPMITable { s8 Signature[4]; @@ -1838,14 +1897,18 @@ struct SPMITable { */ u8 InterruptType; - /* If bit 0 of InterruptType is set, then this is the SCI - interrupt in the GPEx_STS register. */ + /* + * If bit 0 of InterruptType is set, then this is the SCI + * interrupt in the GPEx_STS register. + */ u8 GPE; s16 Reserved; - /* If bit 1 of InterruptType is set, then this is the I/O - APIC/SAPIC interrupt. */ + /* + * If bit 1 of InterruptType is set, then this is the I/O + * APIC/SAPIC interrupt. + */ u32 GlobalSystemInterrupt; /* The actual register address. */ @@ -1863,7 +1926,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) if (spmi->IPMIlegacy != 1) { printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy); - return -ENODEV; + return -ENODEV; } if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) @@ -1880,8 +1943,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) info->addr_source = "ACPI"; /* Figure out the interface type. */ - switch (spmi->InterfaceType) - { + switch (spmi->InterfaceType) { case 1: /* KCS */ info->si_type = SI_KCS; break; @@ -1929,7 +1991,8 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) info->io.addr_type = IPMI_IO_ADDR_SPACE; } else { kfree(info); - printk("ipmi_si: Unknown ACPI I/O Address type\n"); + printk(KERN_WARNING + "ipmi_si: Unknown ACPI I/O Address type\n"); return -EIO; } info->io.addr_data = spmi->addr.address; @@ -1963,8 +2026,7 @@ static __devinit void acpi_find_bmc(void) #endif #ifdef CONFIG_DMI -struct dmi_ipmi_data -{ +struct dmi_ipmi_data { u8 type; u8 addr_space; unsigned long base_addr; @@ -1989,11 +2051,10 @@ static int __devinit decode_dmi(const struct dmi_header *dm, /* I/O */ base_addr &= 0xFFFE; dmi->addr_space = IPMI_IO_ADDR_SPACE; - } - else { + } else /* Memory */ dmi->addr_space = IPMI_MEM_ADDR_SPACE; - } + /* If bit 4 of byte 0x10 is set, then the lsb for the address is odd. */ dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); @@ -2002,7 +2063,7 @@ static int __devinit decode_dmi(const struct dmi_header *dm, /* The top two bits of byte 0x10 hold the register spacing. */ reg_spacing = (data[0x10] & 0xC0) >> 6; - switch(reg_spacing){ + switch (reg_spacing) { case 0x00: /* Byte boundaries */ dmi->offset = 1; break; @@ -2018,12 +2079,14 @@ static int __devinit decode_dmi(const struct dmi_header *dm, } } else { /* Old DMI spec. */ - /* Note that technically, the lower bit of the base + /* + * Note that technically, the lower bit of the base * address should be 1 if the address is I/O and 0 if * the address is in memory. So many systems get that * wrong (and all that I have seen are I/O) so we just * ignore that bit and assume I/O. Systems that use - * memory should use the newer spec, anyway. */ + * memory should use the newer spec, anyway. + */ dmi->base_addr = base_addr & 0xfffe; dmi->addr_space = IPMI_IO_ADDR_SPACE; dmi->offset = 1; @@ -2230,13 +2293,13 @@ static struct pci_device_id ipmi_pci_devices[] = { MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); static struct pci_driver ipmi_pci_driver = { - .name = DEVICE_NAME, - .id_table = ipmi_pci_devices, - .probe = ipmi_pci_probe, - .remove = __devexit_p(ipmi_pci_remove), + .name = DEVICE_NAME, + .id_table = ipmi_pci_devices, + .probe = ipmi_pci_probe, + .remove = __devexit_p(ipmi_pci_remove), #ifdef CONFIG_PM - .suspend = ipmi_pci_suspend, - .resume = ipmi_pci_resume, + .suspend = ipmi_pci_suspend, + .resume = ipmi_pci_resume, #endif }; #endif /* CONFIG_PCI */ @@ -2306,7 +2369,7 @@ static int __devinit ipmi_of_probe(struct of_device *dev, info->io.addr_data, info->io.regsize, info->io.regspacing, info->irq); - dev->dev.driver_data = (void*) info; + dev->dev.driver_data = (void *) info; return try_smi_init(info); } @@ -2319,14 +2382,16 @@ static int __devexit ipmi_of_remove(struct of_device *dev) static struct of_device_id ipmi_match[] = { - { .type = "ipmi", .compatible = "ipmi-kcs", .data = (void *)(unsigned long) SI_KCS }, - { .type = "ipmi", .compatible = "ipmi-smic", .data = (void *)(unsigned long) SI_SMIC }, - { .type = "ipmi", .compatible = "ipmi-bt", .data = (void *)(unsigned long) SI_BT }, + { .type = "ipmi", .compatible = "ipmi-kcs", + .data = (void *)(unsigned long) SI_KCS }, + { .type = "ipmi", .compatible = "ipmi-smic", + .data = (void *)(unsigned long) SI_SMIC }, + { .type = "ipmi", .compatible = "ipmi-bt", + .data = (void *)(unsigned long) SI_BT }, {}, }; -static struct of_platform_driver ipmi_of_platform_driver = -{ +static struct of_platform_driver ipmi_of_platform_driver = { .name = "ipmi", .match_table = ipmi_match, .probe = ipmi_of_probe, @@ -2347,32 +2412,32 @@ static int try_get_dev_id(struct smi_info *smi_info) if (!resp) return -ENOMEM; - /* Do a Get Device ID command, since it comes back with some - useful info. */ + /* + * Do a Get Device ID command, since it comes back with some + * useful info. + */ msg[0] = IPMI_NETFN_APP_REQUEST << 2; msg[1] = IPMI_GET_DEVICE_ID_CMD; smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2); smi_result = smi_info->handlers->event(smi_info->si_sm, 0); - for (;;) - { + for (;;) { if (smi_result == SI_SM_CALL_WITH_DELAY || smi_result == SI_SM_CALL_WITH_TICK_DELAY) { schedule_timeout_uninterruptible(1); smi_result = smi_info->handlers->event( smi_info->si_sm, 100); - } - else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) - { + } else if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { smi_result = smi_info->handlers->event( smi_info->si_sm, 0); - } - else + } else break; } if (smi_result == SI_SM_HOSED) { - /* We couldn't get the state machine to run, so whatever's at - the port is probably not an IPMI SMI interface. */ + /* + * We couldn't get the state machine to run, so whatever's at + * the port is probably not an IPMI SMI interface. + */ rv = -ENODEV; goto out; } @@ -2405,30 +2470,28 @@ static int stat_file_read_proc(char *page, char **start, off_t off, out += sprintf(out, "interrupts_enabled: %d\n", smi->irq && !smi->interrupt_disabled); - out += sprintf(out, "short_timeouts: %ld\n", - smi->short_timeouts); - out += sprintf(out, "long_timeouts: %ld\n", - smi->long_timeouts); - out += sprintf(out, "timeout_restarts: %ld\n", - smi->timeout_restarts); - out += sprintf(out, "idles: %ld\n", - smi->idles); - out += sprintf(out, "interrupts: %ld\n", - smi->interrupts); - out += sprintf(out, "attentions: %ld\n", - smi->attentions); - out += sprintf(out, "flag_fetches: %ld\n", - smi->flag_fetches); - out += sprintf(out, "hosed_count: %ld\n", - smi->hosed_count); - out += sprintf(out, "complete_transactions: %ld\n", - smi->complete_transactions); - out += sprintf(out, "events: %ld\n", - smi->events); - out += sprintf(out, "watchdog_pretimeouts: %ld\n", - smi->watchdog_pretimeouts); - out += sprintf(out, "incoming_messages: %ld\n", - smi->incoming_messages); + out += sprintf(out, "short_timeouts: %u\n", + smi_get_stat(smi, short_timeouts)); + out += sprintf(out, "long_timeouts: %u\n", + smi_get_stat(smi, long_timeouts)); + out += sprintf(out, "idles: %u\n", + smi_get_stat(smi, idles)); + out += sprintf(out, "interrupts: %u\n", + smi_get_stat(smi, interrupts)); + out += sprintf(out, "attentions: %u\n", + smi_get_stat(smi, attentions)); + out += sprintf(out, "flag_fetches: %u\n", + smi_get_stat(smi, flag_fetches)); + out += sprintf(out, "hosed_count: %u\n", + smi_get_stat(smi, hosed_count)); + out += sprintf(out, "complete_transactions: %u\n", + smi_get_stat(smi, complete_transactions)); + out += sprintf(out, "events: %u\n", + smi_get_stat(smi, events)); + out += sprintf(out, "watchdog_pretimeouts: %u\n", + smi_get_stat(smi, watchdog_pretimeouts)); + out += sprintf(out, "incoming_messages: %u\n", + smi_get_stat(smi, incoming_messages)); return out - page; } @@ -2460,7 +2523,7 @@ static int param_read_proc(char *page, char **start, off_t off, static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info) { smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) | - RECEIVE_MSG_AVAIL); + RECEIVE_MSG_AVAIL); return 1; } @@ -2502,10 +2565,9 @@ static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info) id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) { smi_info->oem_data_avail_handler = oem_data_avail_to_receive_msg_avail; - } - else if (ipmi_version_major(id) < 1 || - (ipmi_version_major(id) == 1 && - ipmi_version_minor(id) < 5)) { + } else if (ipmi_version_major(id) < 1 || + (ipmi_version_major(id) == 1 && + ipmi_version_minor(id) < 5)) { smi_info->oem_data_avail_handler = oem_data_avail_to_receive_msg_avail; } @@ -2597,8 +2659,10 @@ static void setup_xaction_handlers(struct smi_info *smi_info) static inline void wait_for_timer_and_thread(struct smi_info *smi_info) { if (smi_info->intf) { - /* The timer and thread are only running if the - interface has been started up and registered. */ + /* + * The timer and thread are only running if the + * interface has been started up and registered. + */ if (smi_info->thread != NULL) kthread_stop(smi_info->thread); del_timer_sync(&smi_info->si_timer); @@ -2676,6 +2740,7 @@ static int is_new_interface(struct smi_info *info) static int try_smi_init(struct smi_info *new_smi) { int rv; + int i; if (new_smi->addr_source) { printk(KERN_INFO "ipmi_si: Trying %s-specified %s state" @@ -2722,7 +2787,7 @@ static int try_smi_init(struct smi_info *new_smi) /* Allocate the state machine's data and initialize it. */ new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL); if (!new_smi->si_sm) { - printk(" Could not allocate state machine memory\n"); + printk(KERN_ERR "Could not allocate state machine memory\n"); rv = -ENOMEM; goto out_err; } @@ -2732,13 +2797,12 @@ static int try_smi_init(struct smi_info *new_smi) /* Now that we know the I/O size, we can set up the I/O. */ rv = new_smi->io_setup(new_smi); if (rv) { - printk(" Could not set up I/O space\n"); + printk(KERN_ERR "Could not set up I/O space\n"); goto out_err; } spin_lock_init(&(new_smi->si_lock)); spin_lock_init(&(new_smi->msg_lock)); - spin_lock_init(&(new_smi->count_lock)); /* Do low-level detection first. */ if (new_smi->handlers->detect(new_smi->si_sm)) { @@ -2749,8 +2813,10 @@ static int try_smi_init(struct smi_info *new_smi) goto out_err; } - /* Attempt a get device id command. If it fails, we probably - don't have a BMC here. */ + /* + * Attempt a get device id command. If it fails, we probably + * don't have a BMC here. + */ rv = try_get_dev_id(new_smi); if (rv) { if (new_smi->addr_source) @@ -2767,22 +2833,28 @@ static int try_smi_init(struct smi_info *new_smi) new_smi->curr_msg = NULL; atomic_set(&new_smi->req_events, 0); new_smi->run_to_completion = 0; + for (i = 0; i < SI_NUM_STATS; i++) + atomic_set(&new_smi->stats[i], 0); new_smi->interrupt_disabled = 0; atomic_set(&new_smi->stop_operation, 0); new_smi->intf_num = smi_num; smi_num++; - /* Start clearing the flags before we enable interrupts or the - timer to avoid racing with the timer. */ + /* + * Start clearing the flags before we enable interrupts or the + * timer to avoid racing with the timer. + */ start_clear_flags(new_smi); /* IRQ is defined to be set when non-zero. */ if (new_smi->irq) new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ; if (!new_smi->dev) { - /* If we don't already have a device from something - * else (like PCI), then register a new one. */ + /* + * If we don't already have a device from something + * else (like PCI), then register a new one. + */ new_smi->pdev = platform_device_alloc("ipmi_si", new_smi->intf_num); if (rv) { @@ -2820,7 +2892,7 @@ static int try_smi_init(struct smi_info *new_smi) } rv = ipmi_smi_add_proc_entry(new_smi->intf, "type", - type_file_read_proc, NULL, + type_file_read_proc, new_smi, THIS_MODULE); if (rv) { printk(KERN_ERR @@ -2830,7 +2902,7 @@ static int try_smi_init(struct smi_info *new_smi) } rv = ipmi_smi_add_proc_entry(new_smi->intf, "si_stats", - stat_file_read_proc, NULL, + stat_file_read_proc, new_smi, THIS_MODULE); if (rv) { printk(KERN_ERR @@ -2840,7 +2912,7 @@ static int try_smi_init(struct smi_info *new_smi) } rv = ipmi_smi_add_proc_entry(new_smi->intf, "params", - param_read_proc, NULL, + param_read_proc, new_smi, THIS_MODULE); if (rv) { printk(KERN_ERR @@ -2853,7 +2925,8 @@ static int try_smi_init(struct smi_info *new_smi) mutex_unlock(&smi_infos_lock); - printk(KERN_INFO "IPMI %s interface initialized\n",si_to_str[new_smi->si_type]); + printk(KERN_INFO "IPMI %s interface initialized\n", + si_to_str[new_smi->si_type]); return 0; @@ -2868,9 +2941,11 @@ static int try_smi_init(struct smi_info *new_smi) if (new_smi->irq_cleanup) new_smi->irq_cleanup(new_smi); - /* Wait until we know that we are out of any interrupt - handlers might have been running before we freed the - interrupt. */ + /* + * Wait until we know that we are out of any interrupt + * handlers might have been running before we freed the + * interrupt. + */ synchronize_sched(); if (new_smi->si_sm) { @@ -2942,11 +3017,10 @@ static __devinit int init_ipmi_si(void) #ifdef CONFIG_PCI rv = pci_register_driver(&ipmi_pci_driver); - if (rv){ + if (rv) printk(KERN_ERR "init_ipmi_si: Unable to register PCI driver: %d\n", rv); - } #endif #ifdef CONFIG_PPC_OF @@ -2975,7 +3049,8 @@ static __devinit int init_ipmi_si(void) of_unregister_platform_driver(&ipmi_of_platform_driver); #endif driver_unregister(&ipmi_driver); - printk("ipmi_si: Unable to find any System Interface(s)\n"); + printk(KERN_WARNING + "ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; } else { mutex_unlock(&smi_infos_lock); @@ -2997,13 +3072,17 @@ static void cleanup_one_si(struct smi_info *to_clean) /* Tell the driver that we are shutting down. */ atomic_inc(&to_clean->stop_operation); - /* Make sure the timer and thread are stopped and will not run - again. */ + /* + * Make sure the timer and thread are stopped and will not run + * again. + */ wait_for_timer_and_thread(to_clean); - /* Timeouts are stopped, now make sure the interrupts are off - for the device. A little tricky with locks to make sure - there are no races. */ + /* + * Timeouts are stopped, now make sure the interrupts are off + * for the device. A little tricky with locks to make sure + * there are no races. + */ spin_lock_irqsave(&to_clean->si_lock, flags); while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { spin_unlock_irqrestore(&to_clean->si_lock, flags); @@ -3074,4 +3153,5 @@ module_exit(cleanup_ipmi_si); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); -MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces."); +MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT" + " system interfaces."); diff --git a/drivers/char/ipmi/ipmi_si_sm.h b/drivers/char/ipmi/ipmi_si_sm.h index 4b731b24dc16..df89f73475fb 100644 --- a/drivers/char/ipmi/ipmi_si_sm.h +++ b/drivers/char/ipmi/ipmi_si_sm.h @@ -34,22 +34,27 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -/* This is defined by the state machines themselves, it is an opaque - data type for them to use. */ +/* + * This is defined by the state machines themselves, it is an opaque + * data type for them to use. + */ struct si_sm_data; -/* The structure for doing I/O in the state machine. The state - machine doesn't have the actual I/O routines, they are done through - this interface. */ -struct si_sm_io -{ +/* + * The structure for doing I/O in the state machine. The state + * machine doesn't have the actual I/O routines, they are done through + * this interface. + */ +struct si_sm_io { unsigned char (*inputb)(struct si_sm_io *io, unsigned int offset); void (*outputb)(struct si_sm_io *io, unsigned int offset, unsigned char b); - /* Generic info used by the actual handling routines, the - state machine shouldn't touch these. */ + /* + * Generic info used by the actual handling routines, the + * state machine shouldn't touch these. + */ void __iomem *addr; int regspacing; int regsize; @@ -59,53 +64,67 @@ struct si_sm_io }; /* Results of SMI events. */ -enum si_sm_result -{ +enum si_sm_result { SI_SM_CALL_WITHOUT_DELAY, /* Call the driver again immediately */ SI_SM_CALL_WITH_DELAY, /* Delay some before calling again. */ - SI_SM_CALL_WITH_TICK_DELAY, /* Delay at least 1 tick before calling again. */ + SI_SM_CALL_WITH_TICK_DELAY,/* Delay >=1 tick before calling again. */ SI_SM_TRANSACTION_COMPLETE, /* A transaction is finished. */ SI_SM_IDLE, /* The SM is in idle state. */ SI_SM_HOSED, /* The hardware violated the state machine. */ - SI_SM_ATTN /* The hardware is asserting attn and the - state machine is idle. */ + + /* + * The hardware is asserting attn and the state machine is + * idle. + */ + SI_SM_ATTN }; /* Handlers for the SMI state machine. */ -struct si_sm_handlers -{ - /* Put the version number of the state machine here so the - upper layer can print it. */ +struct si_sm_handlers { + /* + * Put the version number of the state machine here so the + * upper layer can print it. + */ char *version; - /* Initialize the data and return the amount of I/O space to - reserve for the space. */ + /* + * Initialize the data and return the amount of I/O space to + * reserve for the space. + */ unsigned int (*init_data)(struct si_sm_data *smi, struct si_sm_io *io); - /* Start a new transaction in the state machine. This will - return -2 if the state machine is not idle, -1 if the size - is invalid (to large or too small), or 0 if the transaction - is successfully completed. */ + /* + * Start a new transaction in the state machine. This will + * return -2 if the state machine is not idle, -1 if the size + * is invalid (to large or too small), or 0 if the transaction + * is successfully completed. + */ int (*start_transaction)(struct si_sm_data *smi, unsigned char *data, unsigned int size); - /* Return the results after the transaction. This will return - -1 if the buffer is too small, zero if no transaction is - present, or the actual length of the result data. */ + /* + * Return the results after the transaction. This will return + * -1 if the buffer is too small, zero if no transaction is + * present, or the actual length of the result data. + */ int (*get_result)(struct si_sm_data *smi, unsigned char *data, unsigned int length); - /* Call this periodically (for a polled interface) or upon - receiving an interrupt (for a interrupt-driven interface). - If interrupt driven, you should probably poll this - periodically when not in idle state. This should be called - with the time that passed since the last call, if it is - significant. Time is in microseconds. */ + /* + * Call this periodically (for a polled interface) or upon + * receiving an interrupt (for a interrupt-driven interface). + * If interrupt driven, you should probably poll this + * periodically when not in idle state. This should be called + * with the time that passed since the last call, if it is + * significant. Time is in microseconds. + */ enum si_sm_result (*event)(struct si_sm_data *smi, long time); - /* Attempt to detect an SMI. Returns 0 on success or nonzero - on failure. */ + /* + * Attempt to detect an SMI. Returns 0 on success or nonzero + * on failure. + */ int (*detect)(struct si_sm_data *smi); /* The interface is shutting down, so clean it up. */ diff --git a/drivers/char/ipmi/ipmi_smic_sm.c b/drivers/char/ipmi/ipmi_smic_sm.c index e64ea7d25d24..faed92971907 100644 --- a/drivers/char/ipmi/ipmi_smic_sm.c +++ b/drivers/char/ipmi/ipmi_smic_sm.c @@ -85,6 +85,7 @@ enum smic_states { /* SMIC Flags Register Bits */ #define SMIC_RX_DATA_READY 0x80 #define SMIC_TX_DATA_READY 0x40 + /* * SMIC_SMI and SMIC_EVM_DATA_AVAIL are only used by * a few systems, and then only by Systems Management @@ -104,23 +105,22 @@ enum smic_states { #define EC_ILLEGAL_COMMAND 0x04 #define EC_BUFFER_FULL 0x05 -struct si_sm_data -{ +struct si_sm_data { enum smic_states state; struct si_sm_io *io; - unsigned char write_data[MAX_SMIC_WRITE_SIZE]; - int write_pos; - int write_count; - int orig_write_count; - unsigned char read_data[MAX_SMIC_READ_SIZE]; - int read_pos; - int truncated; - unsigned int error_retries; - long smic_timeout; + unsigned char write_data[MAX_SMIC_WRITE_SIZE]; + int write_pos; + int write_count; + int orig_write_count; + unsigned char read_data[MAX_SMIC_READ_SIZE]; + int read_pos; + int truncated; + unsigned int error_retries; + long smic_timeout; }; -static unsigned int init_smic_data (struct si_sm_data *smic, - struct si_sm_io *io) +static unsigned int init_smic_data(struct si_sm_data *smic, + struct si_sm_io *io) { smic->state = SMIC_IDLE; smic->io = io; @@ -150,11 +150,10 @@ static int start_smic_transaction(struct si_sm_data *smic, return IPMI_NOT_IN_MY_STATE_ERR; if (smic_debug & SMIC_DEBUG_MSG) { - printk(KERN_INFO "start_smic_transaction -"); - for (i = 0; i < size; i ++) { - printk (" %02x", (unsigned char) (data [i])); - } - printk ("\n"); + printk(KERN_DEBUG "start_smic_transaction -"); + for (i = 0; i < size; i++) + printk(" %02x", (unsigned char) data[i]); + printk("\n"); } smic->error_retries = 0; memcpy(smic->write_data, data, size); @@ -173,11 +172,10 @@ static int smic_get_result(struct si_sm_data *smic, int i; if (smic_debug & SMIC_DEBUG_MSG) { - printk (KERN_INFO "smic_get result -"); - for (i = 0; i < smic->read_pos; i ++) { - printk (" %02x", (smic->read_data [i])); - } - printk ("\n"); + printk(KERN_DEBUG "smic_get result -"); + for (i = 0; i < smic->read_pos; i++) + printk(" %02x", smic->read_data[i]); + printk("\n"); } if (length < smic->read_pos) { smic->read_pos = length; @@ -223,8 +221,8 @@ static inline void write_smic_control(struct si_sm_data *smic, smic->io->outputb(smic->io, 1, control); } -static inline void write_si_sm_data (struct si_sm_data *smic, - unsigned char data) +static inline void write_si_sm_data(struct si_sm_data *smic, + unsigned char data) { smic->io->outputb(smic->io, 0, data); } @@ -233,10 +231,9 @@ static inline void start_error_recovery(struct si_sm_data *smic, char *reason) { (smic->error_retries)++; if (smic->error_retries > SMIC_MAX_ERROR_RETRIES) { - if (smic_debug & SMIC_DEBUG_ENABLE) { + if (smic_debug & SMIC_DEBUG_ENABLE) printk(KERN_WARNING "ipmi_smic_drv: smic hosed: %s\n", reason); - } smic->state = SMIC_HOSED; } else { smic->write_count = smic->orig_write_count; @@ -254,14 +251,14 @@ static inline void write_next_byte(struct si_sm_data *smic) (smic->write_count)--; } -static inline void read_next_byte (struct si_sm_data *smic) +static inline void read_next_byte(struct si_sm_data *smic) { if (smic->read_pos >= MAX_SMIC_READ_SIZE) { - read_smic_data (smic); + read_smic_data(smic); smic->truncated = 1; } else { smic->read_data[smic->read_pos] = read_smic_data(smic); - (smic->read_pos)++; + smic->read_pos++; } } @@ -336,7 +333,7 @@ static inline void read_next_byte (struct si_sm_data *smic) SMIC_SC_SMS_RD_END 0xC6 */ -static enum si_sm_result smic_event (struct si_sm_data *smic, long time) +static enum si_sm_result smic_event(struct si_sm_data *smic, long time) { unsigned char status; unsigned char flags; @@ -347,13 +344,15 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) return SI_SM_HOSED; } if (smic->state != SMIC_IDLE) { - if (smic_debug & SMIC_DEBUG_STATES) { - printk(KERN_INFO + if (smic_debug & SMIC_DEBUG_STATES) + printk(KERN_DEBUG "smic_event - smic->smic_timeout = %ld," " time = %ld\n", smic->smic_timeout, time); - } -/* FIXME: smic_event is sometimes called with time > SMIC_RETRY_TIMEOUT */ + /* + * FIXME: smic_event is sometimes called with time > + * SMIC_RETRY_TIMEOUT + */ if (time < SMIC_RETRY_TIMEOUT) { smic->smic_timeout -= time; if (smic->smic_timeout < 0) { @@ -366,9 +365,9 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) if (flags & SMIC_FLAG_BSY) return SI_SM_CALL_WITH_DELAY; - status = read_smic_status (smic); + status = read_smic_status(smic); if (smic_debug & SMIC_DEBUG_STATES) - printk(KERN_INFO + printk(KERN_DEBUG "smic_event - state = %d, flags = 0x%02x," " status = 0x%02x\n", smic->state, flags, status); @@ -377,9 +376,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) case SMIC_IDLE: /* in IDLE we check for available messages */ if (flags & SMIC_SMS_DATA_AVAIL) - { return SI_SM_ATTN; - } return SI_SM_IDLE; case SMIC_START_OP: @@ -391,7 +388,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) case SMIC_OP_OK: if (status != SMIC_SC_SMS_READY) { - /* this should not happen */ + /* this should not happen */ start_error_recovery(smic, "state = SMIC_OP_OK," " status != SMIC_SC_SMS_READY"); @@ -411,8 +408,10 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) "status != SMIC_SC_SMS_WR_START"); return SI_SM_CALL_WITH_DELAY; } - /* we must not issue WR_(NEXT|END) unless - TX_DATA_READY is set */ + /* + * we must not issue WR_(NEXT|END) unless + * TX_DATA_READY is set + * */ if (flags & SMIC_TX_DATA_READY) { if (smic->write_count == 1) { /* last byte */ @@ -424,10 +423,8 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) } write_next_byte(smic); write_smic_flags(smic, flags | SMIC_FLAG_BSY); - } - else { + } else return SI_SM_CALL_WITH_DELAY; - } break; case SMIC_WRITE_NEXT: @@ -442,52 +439,48 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) if (smic->write_count == 1) { write_smic_control(smic, SMIC_CC_SMS_WR_END); smic->state = SMIC_WRITE_END; - } - else { + } else { write_smic_control(smic, SMIC_CC_SMS_WR_NEXT); smic->state = SMIC_WRITE_NEXT; } write_next_byte(smic); write_smic_flags(smic, flags | SMIC_FLAG_BSY); - } - else { + } else return SI_SM_CALL_WITH_DELAY; - } break; case SMIC_WRITE_END: if (status != SMIC_SC_SMS_WR_END) { - start_error_recovery (smic, - "state = SMIC_WRITE_END, " - "status != SMIC_SC_SMS_WR_END"); + start_error_recovery(smic, + "state = SMIC_WRITE_END, " + "status != SMIC_SC_SMS_WR_END"); return SI_SM_CALL_WITH_DELAY; } /* data register holds an error code */ data = read_smic_data(smic); if (data != 0) { - if (smic_debug & SMIC_DEBUG_ENABLE) { - printk(KERN_INFO + if (smic_debug & SMIC_DEBUG_ENABLE) + printk(KERN_DEBUG "SMIC_WRITE_END: data = %02x\n", data); - } start_error_recovery(smic, "state = SMIC_WRITE_END, " "data != SUCCESS"); return SI_SM_CALL_WITH_DELAY; - } else { + } else smic->state = SMIC_WRITE2READ; - } break; case SMIC_WRITE2READ: - /* we must wait for RX_DATA_READY to be set before we - can continue */ + /* + * we must wait for RX_DATA_READY to be set before we + * can continue + */ if (flags & SMIC_RX_DATA_READY) { write_smic_control(smic, SMIC_CC_SMS_RD_START); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_START; - } else { + } else return SI_SM_CALL_WITH_DELAY; - } break; case SMIC_READ_START: @@ -502,15 +495,16 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_NEXT; - } else { + } else return SI_SM_CALL_WITH_DELAY; - } break; case SMIC_READ_NEXT: switch (status) { - /* smic tells us that this is the last byte to be read - --> clean up */ + /* + * smic tells us that this is the last byte to be read + * --> clean up + */ case SMIC_SC_SMS_RD_END: read_next_byte(smic); write_smic_control(smic, SMIC_CC_SMS_RD_END); @@ -523,9 +517,8 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) write_smic_control(smic, SMIC_CC_SMS_RD_NEXT); write_smic_flags(smic, flags | SMIC_FLAG_BSY); smic->state = SMIC_READ_NEXT; - } else { + } else return SI_SM_CALL_WITH_DELAY; - } break; default: start_error_recovery( @@ -546,10 +539,9 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) data = read_smic_data(smic); /* data register holds an error code */ if (data != 0) { - if (smic_debug & SMIC_DEBUG_ENABLE) { - printk(KERN_INFO + if (smic_debug & SMIC_DEBUG_ENABLE) + printk(KERN_DEBUG "SMIC_READ_END: data = %02x\n", data); - } start_error_recovery(smic, "state = SMIC_READ_END, " "data != SUCCESS"); @@ -565,7 +557,7 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) default: if (smic_debug & SMIC_DEBUG_ENABLE) { - printk(KERN_WARNING "smic->state = %d\n", smic->state); + printk(KERN_DEBUG "smic->state = %d\n", smic->state); start_error_recovery(smic, "state = UNKNOWN"); return SI_SM_CALL_WITH_DELAY; } @@ -576,10 +568,12 @@ static enum si_sm_result smic_event (struct si_sm_data *smic, long time) static int smic_detect(struct si_sm_data *smic) { - /* It's impossible for the SMIC fnags register to be all 1's, - (assuming a properly functioning, self-initialized BMC) - but that's what you get from reading a bogus address, so we - test that first. */ + /* + * It's impossible for the SMIC fnags register to be all 1's, + * (assuming a properly functioning, self-initialized BMC) + * but that's what you get from reading a bogus address, so we + * test that first. + */ if (read_smic_flags(smic) == 0xff) return 1; @@ -595,8 +589,7 @@ static int smic_size(void) return sizeof(struct si_sm_data); } -struct si_sm_handlers smic_smi_handlers = -{ +struct si_sm_handlers smic_smi_handlers = { .init_data = init_smic_data, .start_transaction = start_smic_transaction, .get_result = smic_get_result, diff --git a/drivers/char/ipmi/ipmi_watchdog.c b/drivers/char/ipmi/ipmi_watchdog.c index 8f45ca9235ad..1b9a87047817 100644 --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -54,13 +54,15 @@ #include <asm/atomic.h> #ifdef CONFIG_X86 -/* This is ugly, but I've determined that x86 is the only architecture - that can reasonably support the IPMI NMI watchdog timeout at this - time. If another architecture adds this capability somehow, it - will have to be a somewhat different mechanism and I have no idea - how it will work. So in the unlikely event that another - architecture supports this, we can figure out a good generic - mechanism for it at that time. */ +/* + * This is ugly, but I've determined that x86 is the only architecture + * that can reasonably support the IPMI NMI watchdog timeout at this + * time. If another architecture adds this capability somehow, it + * will have to be a somewhat different mechanism and I have no idea + * how it will work. So in the unlikely event that another + * architecture supports this, we can figure out a good generic + * mechanism for it at that time. + */ #include <asm/kdebug.h> #define HAVE_DIE_NMI #endif @@ -95,9 +97,8 @@ /* Operations that can be performed on a pretimout. */ #define WDOG_PREOP_NONE 0 #define WDOG_PREOP_PANIC 1 -#define WDOG_PREOP_GIVE_DATA 2 /* Cause data to be available to - read. Doesn't work in NMI - mode. */ +/* Cause data to be available to read. Doesn't work in NMI mode. */ +#define WDOG_PREOP_GIVE_DATA 2 /* Actions to perform on a full timeout. */ #define WDOG_SET_TIMEOUT_ACT(byte, use) \ @@ -108,8 +109,10 @@ #define WDOG_TIMEOUT_POWER_DOWN 2 #define WDOG_TIMEOUT_POWER_CYCLE 3 -/* Byte 3 of the get command, byte 4 of the get response is the - pre-timeout in seconds. */ +/* + * Byte 3 of the get command, byte 4 of the get response is the + * pre-timeout in seconds. + */ /* Bits for setting byte 4 of the set command, byte 5 of the get response. */ #define WDOG_EXPIRE_CLEAR_BIOS_FRB2 (1 << 1) @@ -118,11 +121,13 @@ #define WDOG_EXPIRE_CLEAR_SMS_OS (1 << 4) #define WDOG_EXPIRE_CLEAR_OEM (1 << 5) -/* Setting/getting the watchdog timer value. This is for bytes 5 and - 6 (the timeout time) of the set command, and bytes 6 and 7 (the - timeout time) and 8 and 9 (the current countdown value) of the - response. The timeout value is given in seconds (in the command it - is 100ms intervals). */ +/* + * Setting/getting the watchdog timer value. This is for bytes 5 and + * 6 (the timeout time) of the set command, and bytes 6 and 7 (the + * timeout time) and 8 and 9 (the current countdown value) of the + * response. The timeout value is given in seconds (in the command it + * is 100ms intervals). + */ #define WDOG_SET_TIMEOUT(byte1, byte2, val) \ (byte1) = (((val) * 10) & 0xff), (byte2) = (((val) * 10) >> 8) #define WDOG_GET_TIMEOUT(byte1, byte2) \ @@ -184,8 +189,10 @@ static int ipmi_set_timeout(int do_heartbeat); static void ipmi_register_watchdog(int ipmi_intf); static void ipmi_unregister_watchdog(int ipmi_intf); -/* If true, the driver will start running as soon as it is configured - and ready. */ +/* + * If true, the driver will start running as soon as it is configured + * and ready. + */ static int start_now; static int set_param_int(const char *val, struct kernel_param *kp) @@ -309,10 +316,12 @@ static int ipmi_ignore_heartbeat; /* Is someone using the watchdog? Only one user is allowed. */ static unsigned long ipmi_wdog_open; -/* If set to 1, the heartbeat command will set the state to reset and - start the timer. The timer doesn't normally run when the driver is - first opened until the heartbeat is set the first time, this - variable is used to accomplish this. */ +/* + * If set to 1, the heartbeat command will set the state to reset and + * start the timer. The timer doesn't normally run when the driver is + * first opened until the heartbeat is set the first time, this + * variable is used to accomplish this. + */ static int ipmi_start_timer_on_heartbeat; /* IPMI version of the BMC. */ @@ -329,10 +338,12 @@ static int nmi_handler_registered; static int ipmi_heartbeat(void); -/* We use a mutex to make sure that only one thing can send a set - timeout at one time, because we only have one copy of the data. - The mutex is claimed when the set_timeout is sent and freed - when both messages are free. */ +/* + * We use a mutex to make sure that only one thing can send a set + * timeout at one time, because we only have one copy of the data. + * The mutex is claimed when the set_timeout is sent and freed + * when both messages are free. + */ static atomic_t set_timeout_tofree = ATOMIC_INIT(0); static DEFINE_MUTEX(set_timeout_lock); static DECLARE_COMPLETION(set_timeout_wait); @@ -346,15 +357,13 @@ static void set_timeout_free_recv(struct ipmi_recv_msg *msg) if (atomic_dec_and_test(&set_timeout_tofree)) complete(&set_timeout_wait); } -static struct ipmi_smi_msg set_timeout_smi_msg = -{ +static struct ipmi_smi_msg set_timeout_smi_msg = { .done = set_timeout_free_smi }; -static struct ipmi_recv_msg set_timeout_recv_msg = -{ +static struct ipmi_recv_msg set_timeout_recv_msg = { .done = set_timeout_free_recv }; - + static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg, struct ipmi_recv_msg *recv_msg, int *send_heartbeat_now) @@ -373,13 +382,14 @@ static int i_ipmi_set_timeout(struct ipmi_smi_msg *smi_msg, WDOG_SET_TIMER_USE(data[0], WDOG_TIMER_USE_SMS_OS); if ((ipmi_version_major > 1) - || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) - { + || ((ipmi_version_major == 1) && (ipmi_version_minor >= 5))) { /* This is an IPMI 1.5-only feature. */ data[0] |= WDOG_DONT_STOP_ON_SET; } else if (ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { - /* In ipmi 1.0, setting the timer stops the watchdog, we - need to start it back up again. */ + /* + * In ipmi 1.0, setting the timer stops the watchdog, we + * need to start it back up again. + */ hbnow = 1; } @@ -465,12 +475,10 @@ static void panic_recv_free(struct ipmi_recv_msg *msg) atomic_dec(&panic_done_count); } -static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = -{ +static struct ipmi_smi_msg panic_halt_heartbeat_smi_msg = { .done = panic_smi_free }; -static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = -{ +static struct ipmi_recv_msg panic_halt_heartbeat_recv_msg = { .done = panic_recv_free }; @@ -480,8 +488,10 @@ static void panic_halt_ipmi_heartbeat(void) struct ipmi_system_interface_addr addr; int rv; - /* Don't reset the timer if we have the timer turned off, that - re-enables the watchdog. */ + /* + * Don't reset the timer if we have the timer turned off, that + * re-enables the watchdog. + */ if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) return; @@ -505,19 +515,19 @@ static void panic_halt_ipmi_heartbeat(void) atomic_add(2, &panic_done_count); } -static struct ipmi_smi_msg panic_halt_smi_msg = -{ +static struct ipmi_smi_msg panic_halt_smi_msg = { .done = panic_smi_free }; -static struct ipmi_recv_msg panic_halt_recv_msg = -{ +static struct ipmi_recv_msg panic_halt_recv_msg = { .done = panic_recv_free }; -/* Special call, doesn't claim any locks. This is only to be called - at panic or halt time, in run-to-completion mode, when the caller - is the only CPU and the only thing that will be going is these IPMI - calls. */ +/* + * Special call, doesn't claim any locks. This is only to be called + * at panic or halt time, in run-to-completion mode, when the caller + * is the only CPU and the only thing that will be going is these IPMI + * calls. + */ static void panic_halt_ipmi_set_timeout(void) { int send_heartbeat_now; @@ -540,10 +550,12 @@ static void panic_halt_ipmi_set_timeout(void) ipmi_poll_interface(watchdog_user); } -/* We use a semaphore to make sure that only one thing can send a - heartbeat at one time, because we only have one copy of the data. - The semaphore is claimed when the set_timeout is sent and freed - when both messages are free. */ +/* + * We use a mutex to make sure that only one thing can send a + * heartbeat at one time, because we only have one copy of the data. + * The semaphore is claimed when the set_timeout is sent and freed + * when both messages are free. + */ static atomic_t heartbeat_tofree = ATOMIC_INIT(0); static DEFINE_MUTEX(heartbeat_lock); static DECLARE_COMPLETION(heartbeat_wait); @@ -557,15 +569,13 @@ static void heartbeat_free_recv(struct ipmi_recv_msg *msg) if (atomic_dec_and_test(&heartbeat_tofree)) complete(&heartbeat_wait); } -static struct ipmi_smi_msg heartbeat_smi_msg = -{ +static struct ipmi_smi_msg heartbeat_smi_msg = { .done = heartbeat_free_smi }; -static struct ipmi_recv_msg heartbeat_recv_msg = -{ +static struct ipmi_recv_msg heartbeat_recv_msg = { .done = heartbeat_free_recv }; - + static int ipmi_heartbeat(void) { struct kernel_ipmi_msg msg; @@ -580,10 +590,12 @@ static int ipmi_heartbeat(void) ipmi_watchdog_state = action_val; return ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); } else if (pretimeout_since_last_heartbeat) { - /* A pretimeout occurred, make sure we set the timeout. - We don't want to set the action, though, we want to - leave that alone (thus it can't be combined with the - above operation. */ + /* + * A pretimeout occurred, make sure we set the timeout. + * We don't want to set the action, though, we want to + * leave that alone (thus it can't be combined with the + * above operation. + */ return ipmi_set_timeout(IPMI_SET_TIMEOUT_HB_IF_NECESSARY); } @@ -591,8 +603,10 @@ static int ipmi_heartbeat(void) atomic_set(&heartbeat_tofree, 2); - /* Don't reset the timer if we have the timer turned off, that - re-enables the watchdog. */ + /* + * Don't reset the timer if we have the timer turned off, that + * re-enables the watchdog. + */ if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) { mutex_unlock(&heartbeat_lock); return 0; @@ -625,10 +639,12 @@ static int ipmi_heartbeat(void) wait_for_completion(&heartbeat_wait); if (heartbeat_recv_msg.msg.data[0] != 0) { - /* Got an error in the heartbeat response. It was already - reported in ipmi_wdog_msg_handler, but we should return - an error here. */ - rv = -EINVAL; + /* + * Got an error in the heartbeat response. It was already + * reported in ipmi_wdog_msg_handler, but we should return + * an error here. + */ + rv = -EINVAL; } mutex_unlock(&heartbeat_lock); @@ -636,8 +652,7 @@ static int ipmi_heartbeat(void) return rv; } -static struct watchdog_info ident = -{ +static struct watchdog_info ident = { .options = 0, /* WDIOF_SETTIMEOUT, */ .firmware_version = 1, .identity = "IPMI" @@ -650,7 +665,7 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, int i; int val; - switch(cmd) { + switch (cmd) { case WDIOC_GETSUPPORT: i = copy_to_user(argp, &ident, sizeof(ident)); return i ? -EFAULT : 0; @@ -690,15 +705,13 @@ static int ipmi_ioctl(struct inode *inode, struct file *file, i = copy_from_user(&val, argp, sizeof(int)); if (i) return -EFAULT; - if (val & WDIOS_DISABLECARD) - { + if (val & WDIOS_DISABLECARD) { ipmi_watchdog_state = WDOG_TIMEOUT_NONE; ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB); ipmi_start_timer_on_heartbeat = 0; } - if (val & WDIOS_ENABLECARD) - { + if (val & WDIOS_ENABLECARD) { ipmi_watchdog_state = action_val; ipmi_set_timeout(IPMI_SET_TIMEOUT_FORCE_HB); } @@ -724,13 +737,13 @@ static ssize_t ipmi_write(struct file *file, int rv; if (len) { - if (!nowayout) { - size_t i; + if (!nowayout) { + size_t i; /* In case it was set long ago */ expect_close = 0; - for (i = 0; i != len; i++) { + for (i = 0; i != len; i++) { char c; if (get_user(c, buf + i)) @@ -758,15 +771,17 @@ static ssize_t ipmi_read(struct file *file, if (count <= 0) return 0; - /* Reading returns if the pretimeout has gone off, and it only does - it once per pretimeout. */ + /* + * Reading returns if the pretimeout has gone off, and it only does + * it once per pretimeout. + */ spin_lock(&ipmi_read_lock); if (!data_to_read) { if (file->f_flags & O_NONBLOCK) { rv = -EAGAIN; goto out; } - + init_waitqueue_entry(&wait, current); add_wait_queue(&read_q, &wait); while (!data_to_read) { @@ -776,7 +791,7 @@ static ssize_t ipmi_read(struct file *file, spin_lock(&ipmi_read_lock); } remove_wait_queue(&read_q, &wait); - + if (signal_pending(current)) { rv = -ERESTARTSYS; goto out; @@ -799,25 +814,27 @@ static ssize_t ipmi_read(struct file *file, static int ipmi_open(struct inode *ino, struct file *filep) { - switch (iminor(ino)) { - case WATCHDOG_MINOR: + switch (iminor(ino)) { + case WATCHDOG_MINOR: if (test_and_set_bit(0, &ipmi_wdog_open)) - return -EBUSY; + return -EBUSY; - /* Don't start the timer now, let it start on the - first heartbeat. */ + /* + * Don't start the timer now, let it start on the + * first heartbeat. + */ ipmi_start_timer_on_heartbeat = 1; return nonseekable_open(ino, filep); default: return (-ENODEV); - } + } } static unsigned int ipmi_poll(struct file *file, poll_table *wait) { unsigned int mask = 0; - + poll_wait(file, &read_q, wait); spin_lock(&ipmi_read_lock); @@ -851,7 +868,7 @@ static int ipmi_close(struct inode *ino, struct file *filep) clear_bit(0, &ipmi_wdog_open); } - ipmi_fasync (-1, filep, 0); + ipmi_fasync(-1, filep, 0); expect_close = 0; return 0; @@ -882,7 +899,7 @@ static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg, msg->msg.data[0], msg->msg.cmd); } - + ipmi_free_recv_msg(msg); } @@ -902,14 +919,14 @@ static void ipmi_wdog_pretimeout_handler(void *handler_data) } } - /* On some machines, the heartbeat will give - an error and not work unless we re-enable - the timer. So do so. */ + /* + * On some machines, the heartbeat will give an error and not + * work unless we re-enable the timer. So do so. + */ pretimeout_since_last_heartbeat = 1; } -static struct ipmi_user_hndl ipmi_hndlrs = -{ +static struct ipmi_user_hndl ipmi_hndlrs = { .ipmi_recv_hndl = ipmi_wdog_msg_handler, .ipmi_watchdog_pretimeout = ipmi_wdog_pretimeout_handler }; @@ -949,8 +966,10 @@ static void ipmi_register_watchdog(int ipmi_intf) int old_timeout = timeout; int old_preop_val = preop_val; - /* Set the pretimeout to go off in a second and give - ourselves plenty of time to stop the timer. */ + /* + * Set the pretimeout to go off in a second and give + * ourselves plenty of time to stop the timer. + */ ipmi_watchdog_state = WDOG_TIMEOUT_RESET; preop_val = WDOG_PREOP_NONE; /* Make sure nothing happens */ pretimeout = 99; @@ -974,7 +993,7 @@ static void ipmi_register_watchdog(int ipmi_intf) " occur. The NMI pretimeout will" " likely not work\n"); } - out_restore: + out_restore: testing_nmi = 0; preop_val = old_preop_val; pretimeout = old_pretimeout; @@ -1009,9 +1028,11 @@ static void ipmi_unregister_watchdog(int ipmi_intf) /* Make sure no one can call us any more. */ misc_deregister(&ipmi_wdog_miscdev); - /* Wait to make sure the message makes it out. The lower layer has - pointers to our buffers, we want to make sure they are done before - we release our memory. */ + /* + * Wait to make sure the message makes it out. The lower layer has + * pointers to our buffers, we want to make sure they are done before + * we release our memory. + */ while (atomic_read(&set_timeout_tofree)) schedule_timeout_uninterruptible(1); @@ -1052,15 +1073,17 @@ ipmi_nmi(struct notifier_block *self, unsigned long val, void *data) return NOTIFY_STOP; } - /* If we are not expecting a timeout, ignore it. */ + /* If we are not expecting a timeout, ignore it. */ if (ipmi_watchdog_state == WDOG_TIMEOUT_NONE) return NOTIFY_OK; if (preaction_val != WDOG_PRETIMEOUT_NMI) return NOTIFY_OK; - /* If no one else handled the NMI, we assume it was the IPMI - watchdog. */ + /* + * If no one else handled the NMI, we assume it was the IPMI + * watchdog. + */ if (preop_val == WDOG_PREOP_PANIC) { /* On some machines, the heartbeat will give an error and not work unless we re-enable @@ -1082,7 +1105,7 @@ static int wdog_reboot_handler(struct notifier_block *this, unsigned long code, void *unused) { - static int reboot_event_handled = 0; + static int reboot_event_handled; if ((watchdog_user) && (!reboot_event_handled)) { /* Make sure we only do this once. */ @@ -1115,7 +1138,7 @@ static int wdog_panic_handler(struct notifier_block *this, unsigned long event, void *unused) { - static int panic_event_handled = 0; + static int panic_event_handled; /* On a panic, if we have a panic timeout, make sure to extend the watchdog timer to a reasonable value to complete the @@ -1125,7 +1148,7 @@ static int wdog_panic_handler(struct notifier_block *this, ipmi_watchdog_state != WDOG_TIMEOUT_NONE) { /* Make sure we do this only once. */ panic_event_handled = 1; - + timeout = 255; pretimeout = 0; panic_halt_ipmi_set_timeout(); @@ -1151,8 +1174,7 @@ static void ipmi_smi_gone(int if_num) ipmi_unregister_watchdog(if_num); } -static struct ipmi_smi_watcher smi_watcher = -{ +static struct ipmi_smi_watcher smi_watcher = { .owner = THIS_MODULE, .new_smi = ipmi_new_smi, .smi_gone = ipmi_smi_gone |