diff options
Diffstat (limited to 'drivers/clk')
32 files changed, 1331 insertions, 434 deletions
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig index bace9e98f75d..823f62d900ba 100644 --- a/drivers/clk/Kconfig +++ b/drivers/clk/Kconfig @@ -42,10 +42,12 @@ config COMMON_CLK_WM831X config COMMON_CLK_VERSATILE bool "Clock driver for ARM Reference designs" - depends on ARCH_INTEGRATOR || ARCH_REALVIEW + depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS ---help--- - Supports clocking on ARM Reference designs Integrator/AP, - Integrator/CP, RealView PB1176, EB, PB11MP and PBX. + Supports clocking on ARM Reference designs: + - Integrator/AP and Integrator/CP + - RealView PB1176, EB, PB11MP and PBX + - Versatile Express config COMMON_CLK_MAX77686 tristate "Clock driver for Maxim 77686 MFD" @@ -53,4 +55,12 @@ config COMMON_CLK_MAX77686 ---help--- This driver supports Maxim 77686 crystal oscillator clock. +config CLK_TWL6040 + tristate "External McPDM functional clock from twl6040" + depends on TWL6040_CORE + ---help--- + Enable the external functional clock support on OMAP4+ platforms for + McPDM. McPDM module is using the external bit clock on the McPDM bus + as functional clock. + endmenu diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 71a25b91de00..2701235d5757 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -23,3 +23,4 @@ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o # Chip specific obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o +obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o diff --git a/drivers/clk/clk-bcm2835.c b/drivers/clk/clk-bcm2835.c index 59e0fd8016bf..e69991aab43a 100644 --- a/drivers/clk/clk-bcm2835.c +++ b/drivers/clk/clk-bcm2835.c @@ -33,17 +33,17 @@ void __init bcm2835_init_clocks(void) clk = clk_register_fixed_rate(NULL, "sys_pclk", NULL, CLK_IS_ROOT, 250000000); - if (!clk) + if (IS_ERR(clk)) pr_err("sys_pclk not registered\n"); clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 126000000); - if (!clk) + if (IS_ERR(clk)) pr_err("apb_pclk not registered\n"); clk = clk_register_fixed_rate(NULL, "uart0_pclk", NULL, CLK_IS_ROOT, 3000000); - if (!clk) + if (IS_ERR(clk)) pr_err("uart0_pclk not registered\n"); ret = clk_register_clkdev(clk, NULL, "20201000.uart"); if (ret) @@ -51,7 +51,7 @@ void __init bcm2835_init_clocks(void) clk = clk_register_fixed_rate(NULL, "uart1_pclk", NULL, CLK_IS_ROOT, 125000000); - if (!clk) + if (IS_ERR(clk)) pr_err("uart1_pclk not registered\n"); ret = clk_register_clkdev(clk, NULL, "20215000.uart"); if (ret) diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index f5ec0eebd4d7..af78ed6b67ef 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -97,7 +97,7 @@ void __init of_fixed_clk_setup(struct device_node *node) of_property_read_string(node, "clock-output-names", &clk_name); clk = clk_register_fixed_rate(NULL, clk_name, NULL, CLK_IS_ROOT, rate); - if (clk) + if (!IS_ERR(clk)) of_clk_add_provider(node, of_clk_src_simple_get, clk); } EXPORT_SYMBOL_GPL(of_fixed_clk_setup); diff --git a/drivers/clk/clk-max77686.c b/drivers/clk/clk-max77686.c index ac5f5434cb9a..d098f72e1d5f 100644 --- a/drivers/clk/clk-max77686.c +++ b/drivers/clk/clk-max77686.c @@ -143,7 +143,7 @@ static int max77686_clk_register(struct device *dev, return 0; } -static __devinit int max77686_clk_probe(struct platform_device *pdev) +static int max77686_clk_probe(struct platform_device *pdev) { struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct max77686_clk **max77686_clks; @@ -199,7 +199,7 @@ out: return ret; } -static int __devexit max77686_clk_remove(struct platform_device *pdev) +static int max77686_clk_remove(struct platform_device *pdev) { struct max77686_clk **max77686_clks = platform_get_drvdata(pdev); int i; @@ -223,7 +223,7 @@ static struct platform_driver max77686_clk_driver = { .owner = THIS_MODULE, }, .probe = max77686_clk_probe, - .remove = __devexit_p(max77686_clk_remove), + .remove = max77686_clk_remove, .id_table = max77686_clk_id, }; diff --git a/drivers/clk/clk-prima2.c b/drivers/clk/clk-prima2.c index 517874fa6858..a203ecccdc4f 100644 --- a/drivers/clk/clk-prima2.c +++ b/drivers/clk/clk-prima2.c @@ -1054,118 +1054,118 @@ void __init sirfsoc_of_clk_init(void) /* These are always available (RTC and 26MHz OSC)*/ clk = clk_register_fixed_rate(NULL, "rtc", NULL, CLK_IS_ROOT, 32768); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register_fixed_rate(NULL, "osc", NULL, CLK_IS_ROOT, 26000000); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_pll3.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mem.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_sys.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_security.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b8030000.security"); clk = clk_register(NULL, &clk_dsp.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_gps.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "a8010000.gps"); clk = clk_register(NULL, &clk_mf.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_io.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "io"); clk = clk_register(NULL, &clk_cpu.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "cpu"); clk = clk_register(NULL, &clk_uart0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0050000.uart"); clk = clk_register(NULL, &clk_uart1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0060000.uart"); clk = clk_register(NULL, &clk_uart2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0070000.uart"); clk = clk_register(NULL, &clk_tsc.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0110000.tsc"); clk = clk_register(NULL, &clk_i2c0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00e0000.i2c"); clk = clk_register(NULL, &clk_i2c1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00f0000.i2c"); clk = clk_register(NULL, &clk_spi0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00d0000.spi"); clk = clk_register(NULL, &clk_spi1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0170000.spi"); clk = clk_register(NULL, &clk_pwmc.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0130000.pwm"); clk = clk_register(NULL, &clk_efuse.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0140000.efusesys"); clk = clk_register(NULL, &clk_pulse.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0150000.pulsec"); clk = clk_register(NULL, &clk_dmac0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00b0000.dma-controller"); clk = clk_register(NULL, &clk_dmac1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0160000.dma-controller"); clk = clk_register(NULL, &clk_nand.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0030000.nand"); clk = clk_register(NULL, &clk_audio.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0040000.audio"); clk = clk_register(NULL, &clk_usp0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0080000.usp"); clk = clk_register(NULL, &clk_usp1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b0090000.usp"); clk = clk_register(NULL, &clk_usp2.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00a0000.usp"); clk = clk_register(NULL, &clk_vip.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00c0000.vip"); clk = clk_register(NULL, &clk_gfx.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "98000000.graphics"); clk = clk_register(NULL, &clk_mm.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "a0000000.multimedia"); clk = clk_register(NULL, &clk_lcd.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "90010000.display"); clk = clk_register(NULL, &clk_vpp.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "90020000.vpp"); clk = clk_register(NULL, &clk_mmc01.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mmc23.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_mmc45.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &usb_pll_clk_hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk = clk_register(NULL, &clk_usb0.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00e0000.usb"); clk = clk_register(NULL, &clk_usb1.hw); - BUG_ON(!clk); + BUG_ON(IS_ERR(clk)); clk_register_clkdev(clk, NULL, "b00f0000.usb"); } diff --git a/drivers/clk/clk-twl6040.c b/drivers/clk/clk-twl6040.c new file mode 100644 index 000000000000..bc1e713e7b9c --- /dev/null +++ b/drivers/clk/clk-twl6040.c @@ -0,0 +1,126 @@ +/* +* TWL6040 clock module driver for OMAP4 McPDM functional clock +* +* Copyright (C) 2012 Texas Instruments Inc. +* Peter Ujfalusi <peter.ujfalusi@ti.com> +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License +* version 2 as published by the Free Software Foundation. +* +* This program is distributed in the hope that it will be useful, but +* WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +* General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA +* 02110-1301 USA +* +*/ + +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/mfd/twl6040.h> +#include <linux/clk-provider.h> + +struct twl6040_clk { + struct twl6040 *twl6040; + struct device *dev; + struct clk_hw mcpdm_fclk; + struct clk *clk; + int enabled; +}; + +static int twl6040_bitclk_is_enabled(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + return twl6040_clk->enabled; +} + +static int twl6040_bitclk_prepare(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + int ret; + + ret = twl6040_power(twl6040_clk->twl6040, 1); + if (!ret) + twl6040_clk->enabled = 1; + + return ret; +} + +static void twl6040_bitclk_unprepare(struct clk_hw *hw) +{ + struct twl6040_clk *twl6040_clk = container_of(hw, struct twl6040_clk, + mcpdm_fclk); + int ret; + + ret = twl6040_power(twl6040_clk->twl6040, 0); + if (!ret) + twl6040_clk->enabled = 0; +} + +static const struct clk_ops twl6040_mcpdm_ops = { + .is_enabled = twl6040_bitclk_is_enabled, + .prepare = twl6040_bitclk_prepare, + .unprepare = twl6040_bitclk_unprepare, +}; + +static struct clk_init_data wm831x_clkout_init = { + .name = "mcpdm_fclk", + .ops = &twl6040_mcpdm_ops, + .flags = CLK_IS_ROOT, +}; + +static int __devinit twl6040_clk_probe(struct platform_device *pdev) +{ + struct twl6040 *twl6040 = dev_get_drvdata(pdev->dev.parent); + struct twl6040_clk *clkdata; + + clkdata = devm_kzalloc(&pdev->dev, sizeof(*clkdata), GFP_KERNEL); + if (!clkdata) + return -ENOMEM; + + clkdata->dev = &pdev->dev; + clkdata->twl6040 = twl6040; + + clkdata->mcpdm_fclk.init = &wm831x_clkout_init; + clkdata->clk = clk_register(&pdev->dev, &clkdata->mcpdm_fclk); + if (IS_ERR(clkdata->clk)) + return PTR_ERR(clkdata->clk); + + dev_set_drvdata(&pdev->dev, clkdata); + + return 0; +} + +static int __devexit twl6040_clk_remove(struct platform_device *pdev) +{ + struct twl6040_clk *clkdata = dev_get_drvdata(&pdev->dev); + + clk_unregister(clkdata->clk); + + return 0; +} + +static struct platform_driver twl6040_clk_driver = { + .driver = { + .name = "twl6040-clk", + .owner = THIS_MODULE, + }, + .probe = twl6040_clk_probe, + .remove = __devexit_p(twl6040_clk_remove), +}; + +module_platform_driver(twl6040_clk_driver); + +MODULE_DESCRIPTION("TWL6040 clock driver for McPDM functional clock"); +MODULE_AUTHOR("Peter Ujfalusi <peter.ujfalusi@ti.com>"); +MODULE_ALIAS("platform:twl6040-clk"); +MODULE_LICENSE("GPL"); diff --git a/drivers/clk/clk-vt8500.c b/drivers/clk/clk-vt8500.c index a885600f5270..fe25570874d6 100644 --- a/drivers/clk/clk-vt8500.c +++ b/drivers/clk/clk-vt8500.c @@ -120,8 +120,17 @@ static unsigned long vt8500_dclk_recalc_rate(struct clk_hw *hw, static long vt8500_dclk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { + struct clk_device *cdev = to_clk_device(hw); u32 divisor = *prate / rate; + /* + * If this is a request for SDMMC we have to adjust the divisor + * when >31 to use the fixed predivisor + */ + if ((cdev->div_mask == 0x3F) && (divisor > 31)) { + divisor = 64 * ((divisor / 64) + 1); + } + return *prate / divisor; } @@ -135,6 +144,15 @@ static int vt8500_dclk_set_rate(struct clk_hw *hw, unsigned long rate, if (divisor == cdev->div_mask + 1) divisor = 0; + /* SDMMC mask may need to be corrected before testing if its valid */ + if ((cdev->div_mask == 0x3F) && (divisor > 31)) { + /* + * Bit 5 is a fixed /64 predivisor. If the requested divisor + * is >31 then correct for the fixed divisor being required. + */ + divisor = 0x20 + (divisor / 64); + } + if (divisor > cdev->div_mask) { pr_err("%s: invalid divisor for clock\n", __func__); return -EINVAL; diff --git a/drivers/clk/clk-wm831x.c b/drivers/clk/clk-wm831x.c index e7b7765e85f3..16ed06808554 100644 --- a/drivers/clk/clk-wm831x.c +++ b/drivers/clk/clk-wm831x.c @@ -350,7 +350,7 @@ static struct clk_init_data wm831x_clkout_init = { .flags = CLK_SET_RATE_PARENT, }; -static __devinit int wm831x_clk_probe(struct platform_device *pdev) +static int wm831x_clk_probe(struct platform_device *pdev) { struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent); struct wm831x_clk *clkdata; @@ -370,49 +370,33 @@ static __devinit int wm831x_clk_probe(struct platform_device *pdev) clkdata->xtal_ena = ret & WM831X_XTAL_ENA; clkdata->xtal_hw.init = &wm831x_xtal_init; - clkdata->xtal = clk_register(&pdev->dev, &clkdata->xtal_hw); - if (!clkdata->xtal) - return -EINVAL; + clkdata->xtal = devm_clk_register(&pdev->dev, &clkdata->xtal_hw); + if (IS_ERR(clkdata->xtal)) + return PTR_ERR(clkdata->xtal); clkdata->fll_hw.init = &wm831x_fll_init; - clkdata->fll = clk_register(&pdev->dev, &clkdata->fll_hw); - if (!clkdata->fll) { - ret = -EINVAL; - goto err_xtal; - } + clkdata->fll = devm_clk_register(&pdev->dev, &clkdata->fll_hw); + if (IS_ERR(clkdata->fll)) + return PTR_ERR(clkdata->fll); clkdata->clkout_hw.init = &wm831x_clkout_init; - clkdata->clkout = clk_register(&pdev->dev, &clkdata->clkout_hw); - if (!clkdata->clkout) { - ret = -EINVAL; - goto err_fll; - } + clkdata->clkout = devm_clk_register(&pdev->dev, &clkdata->clkout_hw); + if (IS_ERR(clkdata->clkout)) + return PTR_ERR(clkdata->clkout); dev_set_drvdata(&pdev->dev, clkdata); return 0; - -err_fll: - clk_unregister(clkdata->fll); -err_xtal: - clk_unregister(clkdata->xtal); - return ret; } -static int __devexit wm831x_clk_remove(struct platform_device *pdev) +static int wm831x_clk_remove(struct platform_device *pdev) { - struct wm831x_clk *clkdata = dev_get_drvdata(&pdev->dev); - - clk_unregister(clkdata->clkout); - clk_unregister(clkdata->fll); - clk_unregister(clkdata->xtal); - return 0; } static struct platform_driver wm831x_clk_driver = { .probe = wm831x_clk_probe, - .remove = __devexit_p(wm831x_clk_remove), + .remove = wm831x_clk_remove, .driver = { .name = "wm831x-clk", .owner = THIS_MODULE, diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c index 56e4495ebeb1..251e45d6024d 100644 --- a/drivers/clk/clk.c +++ b/drivers/clk/clk.c @@ -17,6 +17,7 @@ #include <linux/list.h> #include <linux/slab.h> #include <linux/of.h> +#include <linux/device.h> static DEFINE_SPINLOCK(enable_lock); static DEFINE_MUTEX(prepare_lock); @@ -218,8 +219,17 @@ static void clk_disable_unused_subtree(struct clk *clk) if (clk->flags & CLK_IGNORE_UNUSED) goto unlock_out; - if (__clk_is_enabled(clk) && clk->ops->disable) - clk->ops->disable(clk->hw); + /* + * some gate clocks have special needs during the disable-unused + * sequence. call .disable_unused if available, otherwise fall + * back to .disable + */ + if (__clk_is_enabled(clk)) { + if (clk->ops->disable_unused) + clk->ops->disable_unused(clk->hw); + else if (clk->ops->disable) + clk->ops->disable(clk->hw); + } unlock_out: spin_unlock_irqrestore(&enable_lock, flags); @@ -261,7 +271,7 @@ inline struct clk_hw *__clk_get_hw(struct clk *clk) inline u8 __clk_get_num_parents(struct clk *clk) { - return !clk ? -EINVAL : clk->num_parents; + return !clk ? 0 : clk->num_parents; } inline struct clk *__clk_get_parent(struct clk *clk) @@ -269,14 +279,14 @@ inline struct clk *__clk_get_parent(struct clk *clk) return !clk ? NULL : clk->parent; } -inline int __clk_get_enable_count(struct clk *clk) +inline unsigned int __clk_get_enable_count(struct clk *clk) { - return !clk ? -EINVAL : clk->enable_count; + return !clk ? 0 : clk->enable_count; } -inline int __clk_get_prepare_count(struct clk *clk) +inline unsigned int __clk_get_prepare_count(struct clk *clk) { - return !clk ? -EINVAL : clk->prepare_count; + return !clk ? 0 : clk->prepare_count; } unsigned long __clk_get_rate(struct clk *clk) @@ -302,15 +312,15 @@ out: inline unsigned long __clk_get_flags(struct clk *clk) { - return !clk ? -EINVAL : clk->flags; + return !clk ? 0 : clk->flags; } -int __clk_is_enabled(struct clk *clk) +bool __clk_is_enabled(struct clk *clk) { int ret; if (!clk) - return -EINVAL; + return false; /* * .is_enabled is only mandatory for clocks that gate @@ -323,7 +333,7 @@ int __clk_is_enabled(struct clk *clk) ret = clk->ops->is_enabled(clk->hw); out: - return ret; + return !!ret; } static struct clk *__clk_lookup_subtree(const char *name, struct clk *clk) @@ -568,7 +578,7 @@ unsigned long __clk_round_rate(struct clk *clk, unsigned long rate) unsigned long parent_rate = 0; if (!clk) - return -EINVAL; + return 0; if (!clk->ops->round_rate) { if (clk->flags & CLK_SET_RATE_PARENT) @@ -1297,12 +1307,20 @@ int __clk_init(struct device *dev, struct clk *clk) * walk the list of orphan clocks and reparent any that are children of * this clock */ - hlist_for_each_entry_safe(orphan, tmp, tmp2, &clk_orphan_list, child_node) + hlist_for_each_entry_safe(orphan, tmp, tmp2, &clk_orphan_list, child_node) { + if (orphan->ops->get_parent) { + i = orphan->ops->get_parent(orphan->hw); + if (!strcmp(clk->name, orphan->parent_names[i])) + __clk_reparent(orphan, clk); + continue; + } + for (i = 0; i < orphan->num_parents; i++) if (!strcmp(clk->name, orphan->parent_names[i])) { __clk_reparent(orphan, clk); break; } + } /* * optional platform-specific magic @@ -1361,28 +1379,9 @@ struct clk *__clk_register(struct device *dev, struct clk_hw *hw) } EXPORT_SYMBOL_GPL(__clk_register); -/** - * clk_register - allocate a new clock, register it and return an opaque cookie - * @dev: device that is registering this clock - * @hw: link to hardware-specific clock data - * - * clk_register is the primary interface for populating the clock tree with new - * clock nodes. It returns a pointer to the newly allocated struct clk which - * cannot be dereferenced by driver code but may be used in conjuction with the - * rest of the clock API. In the event of an error clk_register will return an - * error code; drivers must test for an error code after calling clk_register. - */ -struct clk *clk_register(struct device *dev, struct clk_hw *hw) +static int _clk_register(struct device *dev, struct clk_hw *hw, struct clk *clk) { int i, ret; - struct clk *clk; - - clk = kzalloc(sizeof(*clk), GFP_KERNEL); - if (!clk) { - pr_err("%s: could not allocate clk\n", __func__); - ret = -ENOMEM; - goto fail_out; - } clk->name = kstrdup(hw->init->name, GFP_KERNEL); if (!clk->name) { @@ -1420,7 +1419,7 @@ struct clk *clk_register(struct device *dev, struct clk_hw *hw) ret = __clk_init(dev, clk); if (!ret) - return clk; + return 0; fail_parent_names_copy: while (--i >= 0) @@ -1429,6 +1428,36 @@ fail_parent_names_copy: fail_parent_names: kfree(clk->name); fail_name: + return ret; +} + +/** + * clk_register - allocate a new clock, register it and return an opaque cookie + * @dev: device that is registering this clock + * @hw: link to hardware-specific clock data + * + * clk_register is the primary interface for populating the clock tree with new + * clock nodes. It returns a pointer to the newly allocated struct clk which + * cannot be dereferenced by driver code but may be used in conjuction with the + * rest of the clock API. In the event of an error clk_register will return an + * error code; drivers must test for an error code after calling clk_register. + */ +struct clk *clk_register(struct device *dev, struct clk_hw *hw) +{ + int ret; + struct clk *clk; + + clk = kzalloc(sizeof(*clk), GFP_KERNEL); + if (!clk) { + pr_err("%s: could not allocate clk\n", __func__); + ret = -ENOMEM; + goto fail_out; + } + + ret = _clk_register(dev, hw, clk); + if (!ret) + return clk; + kfree(clk); fail_out: return ERR_PTR(ret); @@ -1444,6 +1473,63 @@ EXPORT_SYMBOL_GPL(clk_register); void clk_unregister(struct clk *clk) {} EXPORT_SYMBOL_GPL(clk_unregister); +static void devm_clk_release(struct device *dev, void *res) +{ + clk_unregister(res); +} + +/** + * devm_clk_register - resource managed clk_register() + * @dev: device that is registering this clock + * @hw: link to hardware-specific clock data + * + * Managed clk_register(). Clocks returned from this function are + * automatically clk_unregister()ed on driver detach. See clk_register() for + * more information. + */ +struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw) +{ + struct clk *clk; + int ret; + + clk = devres_alloc(devm_clk_release, sizeof(*clk), GFP_KERNEL); + if (!clk) + return ERR_PTR(-ENOMEM); + + ret = _clk_register(dev, hw, clk); + if (!ret) { + devres_add(dev, clk); + } else { + devres_free(clk); + clk = ERR_PTR(ret); + } + + return clk; +} +EXPORT_SYMBOL_GPL(devm_clk_register); + +static int devm_clk_match(struct device *dev, void *res, void *data) +{ + struct clk *c = res; + if (WARN_ON(!c)) + return 0; + return c == data; +} + +/** + * devm_clk_unregister - resource managed clk_unregister() + * @clk: clock to unregister + * + * Deallocate a clock allocated with devm_clk_register(). Normally + * this function will not need to be called and the resource management + * code will ensure that the resource is freed. + */ +void devm_clk_unregister(struct device *dev, struct clk *clk) +{ + WARN_ON(devres_release(dev, devm_clk_release, devm_clk_match, clk)); +} +EXPORT_SYMBOL_GPL(devm_clk_unregister); + /*** clk rate change notifiers ***/ /** diff --git a/drivers/clk/mxs/clk-imx23.c b/drivers/clk/mxs/clk-imx23.c index f00dffb9ad60..8dd476e2a9c5 100644 --- a/drivers/clk/mxs/clk-imx23.c +++ b/drivers/clk/mxs/clk-imx23.c @@ -85,7 +85,7 @@ enum imx23_clk { cpu_xtal, hbus, xbus, lcdif_div, ssp_div, gpmi_div, emi_pll, emi_xtal, etm_div, saif_div, clk32k_div, rtc, adc, spdif_div, clk32k, dri, pwm, filt, uart, ssp, gpmi, spdif, emi, saif, - lcdif, etm, usb, usb_pwr, + lcdif, etm, usb, usb_phy, clk_max }; @@ -143,8 +143,8 @@ int __init mx23_clocks_init(void) clks[saif] = mxs_clk_gate("saif", "saif_div", SAIF, 31); clks[lcdif] = mxs_clk_gate("lcdif", "lcdif_div", PIX, 31); clks[etm] = mxs_clk_gate("etm", "etm_div", ETM, 31); - clks[usb] = mxs_clk_gate("usb", "usb_pwr", DIGCTRL, 2); - clks[usb_pwr] = clk_register_gate(NULL, "usb_pwr", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock); + clks[usb] = mxs_clk_gate("usb", "usb_phy", DIGCTRL, 2); + clks[usb_phy] = clk_register_gate(NULL, "usb_phy", "pll", 0, PLLCTRL0, 18, 0, &mxs_lock); for (i = 0; i < ARRAY_SIZE(clks); i++) if (IS_ERR(clks[i])) { diff --git a/drivers/clk/mxs/clk-imx28.c b/drivers/clk/mxs/clk-imx28.c index 42978f1b4bd2..db3af0874121 100644 --- a/drivers/clk/mxs/clk-imx28.c +++ b/drivers/clk/mxs/clk-imx28.c @@ -140,7 +140,7 @@ enum imx28_clk { emi_xtal, lcdif_div, etm_div, ptp, saif0_div, saif1_div, clk32k_div, rtc, lradc, spdif_div, clk32k, pwm, uart, ssp0, ssp1, ssp2, ssp3, gpmi, spdif, emi, saif0, saif1, lcdif, etm, - fec, can0, can1, usb0, usb1, usb0_pwr, usb1_pwr, enet_out, + fec, can0, can1, usb0, usb1, usb0_phy, usb1_phy, enet_out, clk_max }; @@ -218,10 +218,10 @@ int __init mx28_clocks_init(void) clks[fec] = mxs_clk_gate("fec", "hbus", ENET, 30); clks[can0] = mxs_clk_gate("can0", "ref_xtal", FLEXCAN, 30); clks[can1] = mxs_clk_gate("can1", "ref_xtal", FLEXCAN, 28); - clks[usb0] = mxs_clk_gate("usb0", "usb0_pwr", DIGCTRL, 2); - clks[usb1] = mxs_clk_gate("usb1", "usb1_pwr", DIGCTRL, 16); - clks[usb0_pwr] = clk_register_gate(NULL, "usb0_pwr", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock); - clks[usb1_pwr] = clk_register_gate(NULL, "usb1_pwr", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock); + clks[usb0] = mxs_clk_gate("usb0", "usb0_phy", DIGCTRL, 2); + clks[usb1] = mxs_clk_gate("usb1", "usb1_phy", DIGCTRL, 16); + clks[usb0_phy] = clk_register_gate(NULL, "usb0_phy", "pll0", 0, PLL0CTRL0, 18, 0, &mxs_lock); + clks[usb1_phy] = clk_register_gate(NULL, "usb1_phy", "pll1", 0, PLL1CTRL0, 18, 0, &mxs_lock); clks[enet_out] = clk_register_gate(NULL, "enet_out", "pll2", 0, ENET, 18, 0, &mxs_lock); for (i = 0; i < ARRAY_SIZE(clks); i++) diff --git a/drivers/clk/spear/clk-aux-synth.c b/drivers/clk/spear/clk-aux-synth.c index 6756e7c3bc07..bdfb4421c643 100644 --- a/drivers/clk/spear/clk-aux-synth.c +++ b/drivers/clk/spear/clk-aux-synth.c @@ -179,7 +179,8 @@ struct clk *clk_register_aux(const char *aux_name, const char *gate_name, if (gate_name) { struct clk *tgate_clk; - tgate_clk = clk_register_gate(NULL, gate_name, aux_name, 0, reg, + tgate_clk = clk_register_gate(NULL, gate_name, aux_name, + CLK_SET_RATE_PARENT, reg, aux->masks->enable_bit, 0, lock); if (IS_ERR_OR_NULL(tgate_clk)) goto free_aux; diff --git a/drivers/clk/spear/clk-vco-pll.c b/drivers/clk/spear/clk-vco-pll.c index 5f1b6badeb15..1b9b65bca51e 100644 --- a/drivers/clk/spear/clk-vco-pll.c +++ b/drivers/clk/spear/clk-vco-pll.c @@ -147,7 +147,7 @@ static int clk_pll_set_rate(struct clk_hw *hw, unsigned long drate, struct clk_pll *pll = to_clk_pll(hw); struct pll_rate_tbl *rtbl = pll->vco->rtbl; unsigned long flags = 0, val; - int i; + int uninitialized_var(i); clk_pll_round_rate_index(hw, drate, NULL, &i); diff --git a/drivers/clk/spear/clk.c b/drivers/clk/spear/clk.c index 7cd63788d546..628b6d5ed3d9 100644 --- a/drivers/clk/spear/clk.c +++ b/drivers/clk/spear/clk.c @@ -32,5 +32,8 @@ long clk_round_rate_index(struct clk_hw *hw, unsigned long drate, } } + if ((*index) == rtbl_cnt) + (*index)--; + return rate; } diff --git a/drivers/clk/spear/spear1310_clock.c b/drivers/clk/spear/spear1310_clock.c index 0fcec2aae19c..147e25f00405 100644 --- a/drivers/clk/spear/spear1310_clock.c +++ b/drivers/clk/spear/spear1310_clock.c @@ -313,6 +313,20 @@ static struct aux_clk_masks i2s_sclk_masks = { /* i2s prs1 aux rate configuration table, in ascending order of rates */ static struct aux_rate_tbl i2s_prs1_rtbl[] = { /* For parent clk = 49.152 MHz */ + {.xscale = 1, .yscale = 12, .eq = 0}, /* 2.048 MHz, smp freq = 8Khz */ + {.xscale = 11, .yscale = 96, .eq = 0}, /* 2.816 MHz, smp freq = 11Khz */ + {.xscale = 1, .yscale = 6, .eq = 0}, /* 4.096 MHz, smp freq = 16Khz */ + {.xscale = 11, .yscale = 48, .eq = 0}, /* 5.632 MHz, smp freq = 22Khz */ + + /* + * with parent clk = 49.152, freq gen is 8.192 MHz, smp freq = 32Khz + * with parent clk = 12.288, freq gen is 2.048 MHz, smp freq = 8Khz + */ + {.xscale = 1, .yscale = 3, .eq = 0}, + + /* For parent clk = 49.152 MHz */ + {.xscale = 17, .yscale = 37, .eq = 0}, /* 11.289 MHz, smp freq = 44Khz*/ + {.xscale = 1, .yscale = 2, .eq = 0}, /* 12.288 MHz */ }; @@ -374,9 +388,6 @@ void __init spear1310_clk_init(void) { struct clk *clk, *clk1; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); clk_register_clkdev(clk, "osc_32k_clk", NULL); @@ -401,7 +412,7 @@ void __init spear1310_clk_init(void) clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_RTC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "fc900000.rtc"); + clk_register_clkdev(clk, NULL, "e0580000.rtc"); /* clock derived from 24 or 25 MHz osc clk */ /* vco-pll */ @@ -483,13 +494,18 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "ddr_clk", NULL); /* clock derived from pll1 clk */ - clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 2); + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", + CLK_SET_RATE_PARENT, 1, 2); clk_register_clkdev(clk, "cpu_clk", NULL); clk = clk_register_fixed_factor(NULL, "wdt_clk", "cpu_clk", 0, 1, 2); clk_register_clkdev(clk, NULL, "ec800620.wdt"); + clk = clk_register_fixed_factor(NULL, "smp_twd_clk", "cpu_clk", 0, 1, + 2); + clk_register_clkdev(clk, NULL, "smp_twd"); + clk = clk_register_fixed_factor(NULL, "ahb_clk", "pll1_clk", 0, 1, 6); clk_register_clkdev(clk, "ahb_clk", NULL); @@ -547,14 +563,14 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk1, "uart_syn_gclk", NULL); clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, - ARRAY_SIZE(uart0_parents), 0, SPEAR1310_PERIP_CLK_CFG, - SPEAR1310_UART_CLK_SHIFT, SPEAR1310_UART_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT, + SPEAR1310_PERIP_CLK_CFG, SPEAR1310_UART_CLK_SHIFT, + SPEAR1310_UART_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0, - SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UART_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", + CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB, + SPEAR1310_UART_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0000000.serial"); clk = clk_register_aux("sdhci_syn_clk", "sdhci_syn_gclk", @@ -563,9 +579,9 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "sdhci_syn_clk", NULL); clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL); - clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0, - SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SDHCI_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB, + SPEAR1310_SDHCI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b3000000.sdhci"); clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk", @@ -574,9 +590,9 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "cfxd_syn_clk", NULL); clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL); - clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0, - SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CFXD_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB, + SPEAR1310_CFXD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b2800000.cf"); clk_register_clkdev(clk, NULL, "arasan_xd"); @@ -587,9 +603,9 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk1, "c3_syn_gclk", NULL); clk = clk_register_mux(NULL, "c3_mclk", c3_parents, - ARRAY_SIZE(c3_parents), 0, SPEAR1310_PERIP_CLK_CFG, - SPEAR1310_C3_CLK_SHIFT, SPEAR1310_C3_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(c3_parents), CLK_SET_RATE_PARENT, + SPEAR1310_PERIP_CLK_CFG, SPEAR1310_C3_CLK_SHIFT, + SPEAR1310_C3_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "c3_mclk", NULL); clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0, @@ -615,7 +631,7 @@ void __init spear1310_clk_init(void) ARRAY_SIZE(gmac_phy_parents), 0, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_GMAC_PHY_CLK_SHIFT, SPEAR1310_GMAC_PHY_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, NULL, "stmmacphy.0"); + clk_register_clkdev(clk, "stmmacphy.0", NULL); /* clcd */ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents, @@ -630,22 +646,22 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "clcd_syn_clk", NULL); clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents, - ARRAY_SIZE(clcd_pixel_parents), 0, + ARRAY_SIZE(clcd_pixel_parents), CLK_SET_RATE_PARENT, SPEAR1310_PERIP_CLK_CFG, SPEAR1310_CLCD_CLK_SHIFT, SPEAR1310_CLCD_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "clcd_pixel_clk", NULL); + clk_register_clkdev(clk, "clcd_pixel_mclk", NULL); clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_CLCD_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "clcd_clk", NULL); + clk_register_clkdev(clk, NULL, "e1000000.clcd"); /* i2s */ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents, ARRAY_SIZE(i2s_src_parents), 0, SPEAR1310_I2S_CLK_CFG, SPEAR1310_I2S_SRC_CLK_SHIFT, SPEAR1310_I2S_SRC_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2s_src_clk", NULL); + clk_register_clkdev(clk, "i2s_src_mclk", NULL); clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0, SPEAR1310_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, @@ -653,10 +669,10 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "i2s_prs1_clk", NULL); clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents, - ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1310_I2S_CLK_CFG, - SPEAR1310_I2S_REF_SHIFT, SPEAR1310_I2S_REF_SEL_MASK, 0, - &_lock); - clk_register_clkdev(clk, "i2s_ref_clk", NULL); + ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT, + SPEAR1310_I2S_CLK_CFG, SPEAR1310_I2S_REF_SHIFT, + SPEAR1310_I2S_REF_SEL_MASK, 0, &_lock); + clk_register_clkdev(clk, "i2s_ref_mclk", NULL); clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0, SPEAR1310_PERIP2_CLK_ENB, SPEAR1310_I2S_REF_PAD_CLK_ENB, @@ -664,7 +680,7 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "i2s_ref_pad_clk", NULL); clk = clk_register_aux("i2s_sclk_clk", "i2s_sclk_gclk", - "i2s_ref_pad_clk", 0, SPEAR1310_I2S_CLK_CFG, + "i2s_ref_mclk", 0, SPEAR1310_I2S_CLK_CFG, &i2s_sclk_masks, i2s_sclk_rtbl, ARRAY_SIZE(i2s_sclk_rtbl), &_lock, &clk1); clk_register_clkdev(clk, "i2s_sclk_clk", NULL); @@ -705,35 +721,37 @@ void __init spear1310_clk_init(void) clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh.0_clk", NULL); + clk_register_clkdev(clk, NULL, "e4000000.ohci"); + clk_register_clkdev(clk, NULL, "e4800000.ehci"); clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UHC1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh.1_clk", NULL); + clk_register_clkdev(clk, NULL, "e5000000.ohci"); + clk_register_clkdev(clk, NULL, "e5800000.ehci"); clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_UOC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "uoc"); + clk_register_clkdev(clk, NULL, "e3800000.otg"); clk = clk_register_gate(NULL, "pcie_sata_0_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "dw_pcie.0"); - clk_register_clkdev(clk, NULL, "ahci.0"); + clk_register_clkdev(clk, NULL, "b1000000.ahci"); clk = clk_register_gate(NULL, "pcie_sata_1_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_1_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "dw_pcie.1"); - clk_register_clkdev(clk, NULL, "ahci.1"); + clk_register_clkdev(clk, NULL, "b1800000.ahci"); clk = clk_register_gate(NULL, "pcie_sata_2_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_PCIE_SATA_2_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "dw_pcie.2"); - clk_register_clkdev(clk, NULL, "ahci.2"); + clk_register_clkdev(clk, NULL, "b4000000.ahci"); clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0, SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_SYSRAM0_CLK_ENB, 0, @@ -751,10 +769,10 @@ void __init spear1310_clk_init(void) clk_register_clkdev(clk, "adc_syn_clk", NULL); clk_register_clkdev(clk1, "adc_syn_gclk", NULL); - clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0, - SPEAR1310_PERIP1_CLK_ENB, SPEAR1310_ADC_CLK_ENB, 0, - &_lock); - clk_register_clkdev(clk, NULL, "adc_clk"); + clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1310_PERIP1_CLK_ENB, + SPEAR1310_ADC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "e0080000.adc"); /* clock derived from apb clk */ clk = clk_register_gate(NULL, "ssp0_clk", "apb_clk", 0, @@ -916,15 +934,15 @@ void __init spear1310_clk_init(void) SPEAR1310_RAS_CTRL_REG1, SPEAR1310_SMII_RGMII_PHY_CLK_SHIFT, SPEAR1310_PHY_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, NULL, "stmmacphy.1"); - clk_register_clkdev(clk, NULL, "stmmacphy.2"); - clk_register_clkdev(clk, NULL, "stmmacphy.4"); + clk_register_clkdev(clk, "stmmacphy.1", NULL); + clk_register_clkdev(clk, "stmmacphy.2", NULL); + clk_register_clkdev(clk, "stmmacphy.4", NULL); clk = clk_register_mux(NULL, "rmii_phy_mclk", rmii_phy_parents, ARRAY_SIZE(rmii_phy_parents), 0, SPEAR1310_RAS_CTRL_REG1, SPEAR1310_RMII_PHY_CLK_SHIFT, SPEAR1310_PHY_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, NULL, "stmmacphy.3"); + clk_register_clkdev(clk, "stmmacphy.3", NULL); clk = clk_register_mux(NULL, "uart1_mclk", uart_parents, ARRAY_SIZE(uart_parents), 0, SPEAR1310_RAS_CTRL_REG0, diff --git a/drivers/clk/spear/spear1340_clock.c b/drivers/clk/spear/spear1340_clock.c index 2352cee7f645..82abea366b78 100644 --- a/drivers/clk/spear/spear1340_clock.c +++ b/drivers/clk/spear/spear1340_clock.c @@ -190,6 +190,7 @@ static struct pll_rate_tbl pll4_rtbl[] = { * different values of vco1div2 */ static struct frac_rate_tbl amba_synth_rtbl[] = { + {.div = 0x073A8}, /* for vco1div2 = 600 MHz */ {.div = 0x06062}, /* for vco1div2 = 500 MHz */ {.div = 0x04D1B}, /* for vco1div2 = 400 MHz */ {.div = 0x04000}, /* for vco1div2 = 332 MHz */ @@ -220,6 +221,12 @@ static struct frac_rate_tbl amba_synth_rtbl[] = { * 500 400 200 0x02800 * 500 500 250 0x02000 * -------------------------------------------------------------------- + * 600 200 100 0x06000 + * 600 250 125 0x04CCE + * 600 332 166 0x039D5 + * 600 400 200 0x03000 + * 600 500 250 0x02666 + * -------------------------------------------------------------------- * 664 200 100 0x06a38 * 664 250 125 0x054FD * 664 332 166 0x04000 @@ -238,28 +245,50 @@ static struct frac_rate_tbl sys_synth_rtbl[] = { {.div = 0x08000}, {.div = 0x06a38}, {.div = 0x06666}, + {.div = 0x06000}, {.div = 0x054FD}, {.div = 0x05000}, {.div = 0x04D18}, + {.div = 0x04CCE}, {.div = 0x04000}, + {.div = 0x039D5}, {.div = 0x0351E}, {.div = 0x03333}, {.div = 0x03031}, + {.div = 0x03000}, {.div = 0x02A7E}, {.div = 0x02800}, {.div = 0x0268D}, + {.div = 0x02666}, {.div = 0x02000}, }; /* aux rate configuration table, in ascending order of rates */ static struct aux_rate_tbl aux_rtbl[] = { - /* For VCO1div2 = 500 MHz */ - {.xscale = 10, .yscale = 204, .eq = 0}, /* 12.29 MHz */ - {.xscale = 4, .yscale = 21, .eq = 0}, /* 48 MHz */ - {.xscale = 2, .yscale = 6, .eq = 0}, /* 83 MHz */ - {.xscale = 2, .yscale = 4, .eq = 0}, /* 125 MHz */ - {.xscale = 1, .yscale = 3, .eq = 1}, /* 166 MHz */ - {.xscale = 1, .yscale = 2, .eq = 1}, /* 250 MHz */ + /* 12.29MHz for vic1div2=600MHz and 10.24MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 122, .eq = 0}, + /* 14.70MHz for vic1div2=600MHz and 12.29MHz for VCO1div2=500MHz */ + {.xscale = 10, .yscale = 204, .eq = 0}, + /* 48MHz for vic1div2=600MHz and 40 MHz for VCO1div2=500MHz */ + {.xscale = 4, .yscale = 25, .eq = 0}, + /* 57.14MHz for vic1div2=600MHz and 48 MHz for VCO1div2=500MHz */ + {.xscale = 4, .yscale = 21, .eq = 0}, + /* 83.33MHz for vic1div2=600MHz and 69.44MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 18, .eq = 0}, + /* 100MHz for vic1div2=600MHz and 83.33 MHz for VCO1div2=500MHz */ + {.xscale = 2, .yscale = 6, .eq = 0}, + /* 125MHz for vic1div2=600MHz and 104.1MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 12, .eq = 0}, + /* 150MHz for vic1div2=600MHz and 125MHz for VCO1div2=500MHz */ + {.xscale = 2, .yscale = 4, .eq = 0}, + /* 166MHz for vic1div2=600MHz and 138.88MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 18, .eq = 1}, + /* 200MHz for vic1div2=600MHz and 166MHz for VCO1div2=500MHz */ + {.xscale = 1, .yscale = 3, .eq = 1}, + /* 250MHz for vic1div2=600MHz and 208.33MHz for VCO1div2=500MHz */ + {.xscale = 5, .yscale = 12, .eq = 1}, + /* 300MHz for vic1div2=600MHz and 250MHz for VCO1div2=500MHz */ + {.xscale = 1, .yscale = 2, .eq = 1}, }; /* gmac rate configuration table, in ascending order of rates */ @@ -273,16 +302,23 @@ static struct aux_rate_tbl gmac_rtbl[] = { /* clcd rate configuration table, in ascending order of rates */ static struct frac_rate_tbl clcd_rtbl[] = { + {.div = 0x18000}, /* 25 Mhz , for vc01div4 = 300 MHz*/ + {.div = 0x1638E}, /* 27 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x14000}, /* 25 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x1284B}, /* 27 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x0D8D3}, /* 58 Mhz , for vco1div4 = 393 MHz */ {.div = 0x0B72C}, /* 58 Mhz , for vco1div4 = 332 MHz */ + {.div = 0x0A584}, /* 58 Mhz , for vco1div4 = 300 MHz */ + {.div = 0x093B1}, /* 65 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x089EE}, /* 58 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x081BA}, /* 74 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x07BA0}, /* 65 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x06f1C}, /* 72 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x06E58}, /* 58 Mhz , for vco1div4 = 200 MHz */ {.div = 0x06c1B}, /* 74 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x058E3}, /* 108 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x04A12}, /* 108 Mhz , for vc01div4 = 250 MHz*/ + {.div = 0x040A5}, /* 148.5 Mhz , for vc01div4 = 300 MHz*/ {.div = 0x0378E}, /* 144 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x0360D}, /* 148 Mhz , for vc01div4 = 250 MHz*/ {.div = 0x035E0}, /* 148.5 MHz, for vc01div4 = 250 MHz*/ @@ -351,26 +387,37 @@ static struct aux_rate_tbl adc_rtbl[] = { /* General synth rate configuration table, in ascending order of rates */ static struct frac_rate_tbl gen_rtbl[] = { - /* For vco1div4 = 250 MHz */ - {.div = 0x1624E}, /* 22.5792 MHz */ - {.div = 0x14585}, /* 24.576 MHz */ - {.div = 0x14000}, /* 25 MHz */ - {.div = 0x0B127}, /* 45.1584 MHz */ - {.div = 0x0A000}, /* 50 MHz */ - {.div = 0x061A8}, /* 81.92 MHz */ - {.div = 0x05000}, /* 100 MHz */ - {.div = 0x02800}, /* 200 MHz */ - {.div = 0x02620}, /* 210 MHz */ - {.div = 0x02460}, /* 220 MHz */ - {.div = 0x022C0}, /* 230 MHz */ - {.div = 0x02160}, /* 240 MHz */ - {.div = 0x02000}, /* 250 MHz */ + {.div = 0x1A92B}, /* 22.5792 MHz for vco1div4=300 MHz*/ + {.div = 0x186A0}, /* 24.576 MHz for vco1div4=300 MHz*/ + {.div = 0x18000}, /* 25 MHz for vco1div4=300 MHz*/ + {.div = 0x1624E}, /* 22.5792 MHz for vco1div4=250 MHz*/ + {.div = 0x14585}, /* 24.576 MHz for vco1div4=250 MHz*/ + {.div = 0x14000}, /* 25 MHz for vco1div4=250 MHz*/ + {.div = 0x0D495}, /* 45.1584 MHz for vco1div4=300 MHz*/ + {.div = 0x0C000}, /* 50 MHz for vco1div4=300 MHz*/ + {.div = 0x0B127}, /* 45.1584 MHz for vco1div4=250 MHz*/ + {.div = 0x0A000}, /* 50 MHz for vco1div4=250 MHz*/ + {.div = 0x07530}, /* 81.92 MHz for vco1div4=300 MHz*/ + {.div = 0x061A8}, /* 81.92 MHz for vco1div4=250 MHz*/ + {.div = 0x06000}, /* 100 MHz for vco1div4=300 MHz*/ + {.div = 0x05000}, /* 100 MHz for vco1div4=250 MHz*/ + {.div = 0x03000}, /* 200 MHz for vco1div4=300 MHz*/ + {.div = 0x02DB6}, /* 210 MHz for vco1div4=300 MHz*/ + {.div = 0x02BA2}, /* 220 MHz for vco1div4=300 MHz*/ + {.div = 0x029BD}, /* 230 MHz for vco1div4=300 MHz*/ + {.div = 0x02800}, /* 200 MHz for vco1div4=250 MHz*/ + {.div = 0x02666}, /* 250 MHz for vco1div4=300 MHz*/ + {.div = 0x02620}, /* 210 MHz for vco1div4=250 MHz*/ + {.div = 0x02460}, /* 220 MHz for vco1div4=250 MHz*/ + {.div = 0x022C0}, /* 230 MHz for vco1div4=250 MHz*/ + {.div = 0x02160}, /* 240 MHz for vco1div4=250 MHz*/ + {.div = 0x02000}, /* 250 MHz for vco1div4=250 MHz*/ }; /* clock parents */ static const char *vco_parents[] = { "osc_24m_clk", "osc_25m_clk", }; static const char *sys_parents[] = { "pll1_clk", "pll1_clk", "pll1_clk", - "pll1_clk", "sys_synth_clk", "sys_synth_clk", "pll2_clk", "pll3_clk", }; + "pll1_clk", "sys_syn_clk", "sys_syn_clk", "pll2_clk", "pll3_clk", }; static const char *ahb_parents[] = { "cpu_div3_clk", "amba_syn_clk", }; static const char *gpt_parents[] = { "osc_24m_clk", "apb_clk", }; static const char *uart0_parents[] = { "pll5_clk", "osc_24m_clk", @@ -391,16 +438,13 @@ static const char *spdif_in_parents[] = { "pll2_clk", "gen_syn3_clk", }; static const char *gen_synth0_1_parents[] = { "vco1div4_clk", "vco3div2_clk", "pll3_clk", }; -static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco3div2_clk", +static const char *gen_synth2_3_parents[] = { "vco1div4_clk", "vco2div2_clk", "pll2_clk", }; void __init spear1340_clk_init(void) { struct clk *clk, *clk1; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); clk_register_clkdev(clk, "osc_32k_clk", NULL); @@ -425,7 +469,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "rtc-spear", "osc_32k_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_RTC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "fc900000.rtc"); + clk_register_clkdev(clk, NULL, "e0580000.rtc"); /* clock derived from 24 or 25 MHz osc clk */ /* vco-pll */ @@ -499,7 +543,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "thermal_gclk", "thermal_clk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_THSENS_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_thermal"); + clk_register_clkdev(clk, NULL, "e07008c4.thermal"); /* clock derived from pll4 clk */ clk = clk_register_fixed_factor(NULL, "ddr_clk", "pll4_clk", 0, 1, @@ -521,7 +565,7 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(sys_parents), 0, SPEAR1340_SYS_CLK_CTRL, SPEAR1340_SCLK_SRC_SEL_SHIFT, SPEAR1340_SCLK_SRC_SEL_MASK, 0, &_lock); - clk_register_clkdev(clk, "sys_clk", NULL); + clk_register_clkdev(clk, "sys_mclk", NULL); clk = clk_register_fixed_factor(NULL, "cpu_clk", "sys_mclk", 0, 1, 2); @@ -535,6 +579,10 @@ void __init spear1340_clk_init(void) 2); clk_register_clkdev(clk, NULL, "ec800620.wdt"); + clk = clk_register_fixed_factor(NULL, "smp_twd_clk", "cpu_clk", 0, 1, + 2); + clk_register_clkdev(clk, NULL, "smp_twd"); + clk = clk_register_mux(NULL, "ahb_clk", ahb_parents, ARRAY_SIZE(ahb_parents), 0, SPEAR1340_SYS_CLK_CTRL, SPEAR1340_HCLK_SRC_SEL_SHIFT, @@ -594,14 +642,14 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk1, "uart0_syn_gclk", NULL); clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, - ARRAY_SIZE(uart0_parents), 0, SPEAR1340_PERIP_CLK_CFG, - SPEAR1340_UART0_CLK_SHIFT, SPEAR1340_UART_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT, + SPEAR1340_PERIP_CLK_CFG, SPEAR1340_UART0_CLK_SHIFT, + SPEAR1340_UART_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UART0_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "uart0_clk", "uart0_mclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, + SPEAR1340_UART0_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "e0000000.serial"); clk = clk_register_aux("uart1_syn_clk", "uart1_syn_gclk", @@ -627,9 +675,9 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "sdhci_syn_clk", NULL); clk_register_clkdev(clk1, "sdhci_syn_gclk", NULL); - clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SDHCI_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "sdhci_clk", "sdhci_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, + SPEAR1340_SDHCI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b3000000.sdhci"); clk = clk_register_aux("cfxd_syn_clk", "cfxd_syn_gclk", "vco1div2_clk", @@ -638,9 +686,9 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "cfxd_syn_clk", NULL); clk_register_clkdev(clk1, "cfxd_syn_gclk", NULL); - clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CFXD_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "cfxd_clk", "cfxd_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, + SPEAR1340_CFXD_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "b2800000.cf"); clk_register_clkdev(clk, NULL, "arasan_xd"); @@ -651,15 +699,15 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk1, "c3_syn_gclk", NULL); clk = clk_register_mux(NULL, "c3_mclk", c3_parents, - ARRAY_SIZE(c3_parents), 0, SPEAR1340_PERIP_CLK_CFG, - SPEAR1340_C3_CLK_SHIFT, SPEAR1340_C3_CLK_MASK, 0, - &_lock); + ARRAY_SIZE(c3_parents), CLK_SET_RATE_PARENT, + SPEAR1340_PERIP_CLK_CFG, SPEAR1340_C3_CLK_SHIFT, + SPEAR1340_C3_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "c3_mclk", NULL); - clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", 0, + clk = clk_register_gate(NULL, "c3_clk", "c3_mclk", CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_C3_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "c3"); + clk_register_clkdev(clk, NULL, "e1800000.c3"); /* gmac */ clk = clk_register_mux(NULL, "phy_input_mclk", gmac_phy_input_parents, @@ -679,7 +727,7 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(gmac_phy_parents), 0, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_GMAC_PHY_CLK_SHIFT, SPEAR1340_GMAC_PHY_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, NULL, "stmmacphy.0"); + clk_register_clkdev(clk, "stmmacphy.0", NULL); /* clcd */ clk = clk_register_mux(NULL, "clcd_syn_mclk", clcd_synth_parents, @@ -694,33 +742,34 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "clcd_syn_clk", NULL); clk = clk_register_mux(NULL, "clcd_pixel_mclk", clcd_pixel_parents, - ARRAY_SIZE(clcd_pixel_parents), 0, + ARRAY_SIZE(clcd_pixel_parents), CLK_SET_RATE_PARENT, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_CLCD_CLK_SHIFT, SPEAR1340_CLCD_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "clcd_pixel_clk", NULL); + clk_register_clkdev(clk, "clcd_pixel_mclk", NULL); clk = clk_register_gate(NULL, "clcd_clk", "clcd_pixel_mclk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_CLCD_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "clcd_clk", NULL); + clk_register_clkdev(clk, NULL, "e1000000.clcd"); /* i2s */ clk = clk_register_mux(NULL, "i2s_src_mclk", i2s_src_parents, ARRAY_SIZE(i2s_src_parents), 0, SPEAR1340_I2S_CLK_CFG, SPEAR1340_I2S_SRC_CLK_SHIFT, SPEAR1340_I2S_SRC_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "i2s_src_clk", NULL); + clk_register_clkdev(clk, "i2s_src_mclk", NULL); - clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", 0, - SPEAR1340_I2S_CLK_CFG, &i2s_prs1_masks, i2s_prs1_rtbl, + clk = clk_register_aux("i2s_prs1_clk", NULL, "i2s_src_mclk", + CLK_SET_RATE_PARENT, SPEAR1340_I2S_CLK_CFG, + &i2s_prs1_masks, i2s_prs1_rtbl, ARRAY_SIZE(i2s_prs1_rtbl), &_lock, NULL); clk_register_clkdev(clk, "i2s_prs1_clk", NULL); clk = clk_register_mux(NULL, "i2s_ref_mclk", i2s_ref_parents, - ARRAY_SIZE(i2s_ref_parents), 0, SPEAR1340_I2S_CLK_CFG, - SPEAR1340_I2S_REF_SHIFT, SPEAR1340_I2S_REF_SEL_MASK, 0, - &_lock); - clk_register_clkdev(clk, "i2s_ref_clk", NULL); + ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT, + SPEAR1340_I2S_CLK_CFG, SPEAR1340_I2S_REF_SHIFT, + SPEAR1340_I2S_REF_SEL_MASK, 0, &_lock); + clk_register_clkdev(clk, "i2s_ref_mclk", NULL); clk = clk_register_gate(NULL, "i2s_ref_pad_clk", "i2s_ref_mclk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_I2S_REF_PAD_CLK_ENB, @@ -769,23 +818,25 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "usbh0_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh.0_clk", NULL); + clk_register_clkdev(clk, NULL, "e4000000.ohci"); + clk_register_clkdev(clk, NULL, "e4800000.ehci"); clk = clk_register_gate(NULL, "usbh1_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UHC1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh.1_clk", NULL); + clk_register_clkdev(clk, NULL, "e5000000.ohci"); + clk_register_clkdev(clk, NULL, "e5800000.ehci"); clk = clk_register_gate(NULL, "uoc_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_UOC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "uoc"); + clk_register_clkdev(clk, NULL, "e3800000.otg"); clk = clk_register_gate(NULL, "pcie_sata_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_PCIE_SATA_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "dw_pcie"); - clk_register_clkdev(clk, NULL, "ahci"); + clk_register_clkdev(clk, NULL, "b1000000.ahci"); clk = clk_register_gate(NULL, "sysram0_clk", "ahb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_SYSRAM0_CLK_ENB, 0, @@ -803,10 +854,10 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, "adc_syn_clk", NULL); clk_register_clkdev(clk1, "adc_syn_gclk", NULL); - clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", 0, - SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_ADC_CLK_ENB, 0, - &_lock); - clk_register_clkdev(clk, NULL, "adc_clk"); + clk = clk_register_gate(NULL, "adc_clk", "adc_syn_gclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP1_CLK_ENB, + SPEAR1340_ADC_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "e0080000.adc"); /* clock derived from apb clk */ clk = clk_register_gate(NULL, "ssp_clk", "apb_clk", 0, @@ -827,12 +878,12 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "i2s_play_clk", "apb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_PLAY_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "b2400000.i2s"); + clk_register_clkdev(clk, NULL, "b2400000.i2s-play"); clk = clk_register_gate(NULL, "i2s_rec_clk", "apb_clk", 0, SPEAR1340_PERIP1_CLK_ENB, SPEAR1340_I2S_REC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "b2000000.i2s"); + clk_register_clkdev(clk, NULL, "b2000000.i2s-rec"); clk = clk_register_gate(NULL, "kbd_clk", "apb_clk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_KBD_CLK_ENB, 0, @@ -844,37 +895,37 @@ void __init spear1340_clk_init(void) ARRAY_SIZE(gen_synth0_1_parents), 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT0_1_CLK_SHIFT, SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen_syn0_1_clk", NULL); + clk_register_clkdev(clk, "gen_syn0_1_mclk", NULL); clk = clk_register_mux(NULL, "gen_syn2_3_mclk", gen_synth2_3_parents, ARRAY_SIZE(gen_synth2_3_parents), 0, SPEAR1340_PLL_CFG, SPEAR1340_GEN_SYNT2_3_CLK_SHIFT, SPEAR1340_GEN_SYNT_CLK_MASK, 0, &_lock); - clk_register_clkdev(clk, "gen_syn2_3_clk", NULL); + clk_register_clkdev(clk, "gen_syn2_3_mclk", NULL); - clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_clk", 0, + clk = clk_register_frac("gen_syn0_clk", "gen_syn0_1_mclk", 0, SPEAR1340_GEN_CLK_SYNT0, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); clk_register_clkdev(clk, "gen_syn0_clk", NULL); - clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_clk", 0, + clk = clk_register_frac("gen_syn1_clk", "gen_syn0_1_mclk", 0, SPEAR1340_GEN_CLK_SYNT1, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); clk_register_clkdev(clk, "gen_syn1_clk", NULL); - clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_clk", 0, + clk = clk_register_frac("gen_syn2_clk", "gen_syn2_3_mclk", 0, SPEAR1340_GEN_CLK_SYNT2, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); clk_register_clkdev(clk, "gen_syn2_clk", NULL); - clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_clk", 0, + clk = clk_register_frac("gen_syn3_clk", "gen_syn2_3_mclk", 0, SPEAR1340_GEN_CLK_SYNT3, gen_rtbl, ARRAY_SIZE(gen_rtbl), &_lock); clk_register_clkdev(clk, "gen_syn3_clk", NULL); - clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", 0, - SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_MALI_CLK_ENB, 0, - &_lock); + clk = clk_register_gate(NULL, "mali_clk", "gen_syn3_clk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB, + SPEAR1340_MALI_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, NULL, "mali"); clk = clk_register_gate(NULL, "cec0_clk", "ahb_clk", 0, @@ -888,26 +939,26 @@ void __init spear1340_clk_init(void) clk_register_clkdev(clk, NULL, "spear_cec.1"); clk = clk_register_mux(NULL, "spdif_out_mclk", spdif_out_parents, - ARRAY_SIZE(spdif_out_parents), 0, + ARRAY_SIZE(spdif_out_parents), CLK_SET_RATE_PARENT, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_OUT_CLK_SHIFT, SPEAR1340_SPDIF_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "spdif_out_mclk", NULL); - clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", 0, - SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_OUT_CLK_ENB, - 0, &_lock); - clk_register_clkdev(clk, NULL, "spdif-out"); + clk = clk_register_gate(NULL, "spdif_out_clk", "spdif_out_mclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB, + SPEAR1340_SPDIF_OUT_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0000000.spdif-out"); clk = clk_register_mux(NULL, "spdif_in_mclk", spdif_in_parents, - ARRAY_SIZE(spdif_in_parents), 0, + ARRAY_SIZE(spdif_in_parents), CLK_SET_RATE_PARENT, SPEAR1340_PERIP_CLK_CFG, SPEAR1340_SPDIF_IN_CLK_SHIFT, SPEAR1340_SPDIF_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "spdif_in_mclk", NULL); - clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", 0, - SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_SPDIF_IN_CLK_ENB, 0, - &_lock); - clk_register_clkdev(clk, NULL, "spdif-in"); + clk = clk_register_gate(NULL, "spdif_in_clk", "spdif_in_mclk", + CLK_SET_RATE_PARENT, SPEAR1340_PERIP3_CLK_ENB, + SPEAR1340_SPDIF_IN_CLK_ENB, 0, &_lock); + clk_register_clkdev(clk, NULL, "d0100000.spdif-in"); clk = clk_register_gate(NULL, "acp_clk", "acp_mclk", 0, SPEAR1340_PERIP2_CLK_ENB, SPEAR1340_ACP_CLK_ENB, 0, @@ -917,7 +968,7 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "plgpio_clk", "plgpio_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PLGPIO_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "plgpio"); + clk_register_clkdev(clk, NULL, "e2800000.gpio"); clk = clk_register_gate(NULL, "video_dec_clk", "video_dec_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_VIDEO_DEC_CLK_ENB, @@ -937,25 +988,25 @@ void __init spear1340_clk_init(void) clk = clk_register_gate(NULL, "cam0_clk", "cam0_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_camif.0"); + clk_register_clkdev(clk, NULL, "d0200000.cam0"); clk = clk_register_gate(NULL, "cam1_clk", "cam1_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_camif.1"); + clk_register_clkdev(clk, NULL, "d0300000.cam1"); clk = clk_register_gate(NULL, "cam2_clk", "cam2_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM2_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_camif.2"); + clk_register_clkdev(clk, NULL, "d0400000.cam2"); clk = clk_register_gate(NULL, "cam3_clk", "cam3_mclk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_CAM3_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "spear_camif.3"); + clk_register_clkdev(clk, NULL, "d0500000.cam3"); - clk = clk_register_gate(NULL, "pwm_clk", "pwm_mclk", 0, + clk = clk_register_gate(NULL, "pwm_clk", "ahb_clk", 0, SPEAR1340_PERIP3_CLK_ENB, SPEAR1340_PWM_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "pwm"); + clk_register_clkdev(clk, NULL, "e0180000.pwm"); } diff --git a/drivers/clk/spear/spear3xx_clock.c b/drivers/clk/spear/spear3xx_clock.c index c3157454bb3f..33d3ac588da7 100644 --- a/drivers/clk/spear/spear3xx_clock.c +++ b/drivers/clk/spear/spear3xx_clock.c @@ -107,6 +107,12 @@ static struct pll_rate_tbl pll_rtbl[] = { /* aux rate configuration table, in ascending order of rates */ static struct aux_rate_tbl aux_rtbl[] = { /* For PLL1 = 332 MHz */ + {.xscale = 1, .yscale = 81, .eq = 0}, /* 2.049 MHz */ + {.xscale = 1, .yscale = 59, .eq = 0}, /* 2.822 MHz */ + {.xscale = 2, .yscale = 81, .eq = 0}, /* 4.098 MHz */ + {.xscale = 3, .yscale = 89, .eq = 0}, /* 5.644 MHz */ + {.xscale = 4, .yscale = 81, .eq = 0}, /* 8.197 MHz */ + {.xscale = 4, .yscale = 59, .eq = 0}, /* 11.254 MHz */ {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ @@ -157,6 +163,8 @@ static void __init spear300_clk_init(void) 1); clk_register_clkdev(clk, NULL, "a0000000.kbd"); } +#else +static inline void spear300_clk_init(void) { } #endif /* array of all spear 310 clock lookups */ @@ -197,6 +205,8 @@ static void __init spear310_clk_init(void) 1); clk_register_clkdev(clk, NULL, "b2200000.serial"); } +#else +static inline void spear310_clk_init(void) { } #endif /* array of all spear 320 clock lookups */ @@ -251,7 +261,7 @@ static void __init spear320_clk_init(void) clk = clk_register_fixed_factor(NULL, "pwm_clk", "ras_ahb_clk", 0, 1, 1); - clk_register_clkdev(clk, "pwm", NULL); + clk_register_clkdev(clk, NULL, "a8000000.pwm"); clk = clk_register_fixed_factor(NULL, "ssp1_clk", "ras_ahb_clk", 0, 1, 1); @@ -271,26 +281,37 @@ static void __init spear320_clk_init(void) clk = clk_register_fixed_factor(NULL, "i2s_clk", "ras_apb_clk", 0, 1, 1); - clk_register_clkdev(clk, NULL, "i2s"); + clk_register_clkdev(clk, NULL, "a9400000.i2s"); clk = clk_register_mux(NULL, "i2s_ref_clk", i2s_ref_parents, - ARRAY_SIZE(i2s_ref_parents), 0, SPEAR320_CONTROL_REG, - I2S_REF_PCLK_SHIFT, I2S_REF_PCLK_MASK, 0, &_lock); + ARRAY_SIZE(i2s_ref_parents), CLK_SET_RATE_PARENT, + SPEAR320_CONTROL_REG, I2S_REF_PCLK_SHIFT, + I2S_REF_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, "i2s_ref_clk", NULL); - clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", 0, 1, + clk = clk_register_fixed_factor(NULL, "i2s_sclk", "i2s_ref_clk", + CLK_SET_RATE_PARENT, 1, 4); clk_register_clkdev(clk, "i2s_sclk", NULL); + clk = clk_register_fixed_factor(NULL, "macb1_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "hclk", "aa000000.eth"); + + clk = clk_register_fixed_factor(NULL, "macb2_clk", "ras_apb_clk", 0, 1, + 1); + clk_register_clkdev(clk, "hclk", "ab000000.eth"); + clk = clk_register_mux(NULL, "rs485_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_RS485_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_RS485_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a9300000.serial"); clk = clk_register_mux(NULL, "sdhci_clk", sdhci_parents, - ARRAY_SIZE(sdhci_parents), 0, SPEAR320_CONTROL_REG, - SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, 0, &_lock); + ARRAY_SIZE(sdhci_parents), CLK_SET_RATE_PARENT, + SPEAR320_CONTROL_REG, SDHCI_PCLK_SHIFT, SDHCI_PCLK_MASK, + 0, &_lock); clk_register_clkdev(clk, NULL, "70000000.sdhci"); clk = clk_register_mux(NULL, "smii_pclk", smii0_parents, @@ -302,49 +323,49 @@ static void __init spear320_clk_init(void) clk_register_clkdev(clk, NULL, "smii"); clk = clk_register_mux(NULL, "uart1_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_CONTROL_REG, - UART1_PCLK_SHIFT, UART1_PCLK_MASK, 0, &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_CONTROL_REG, UART1_PCLK_SHIFT, UART1_PCLK_MASK, + 0, &_lock); clk_register_clkdev(clk, NULL, "a3000000.serial"); clk = clk_register_mux(NULL, "uart2_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART2_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART2_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a4000000.serial"); clk = clk_register_mux(NULL, "uart3_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART3_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART3_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a9100000.serial"); clk = clk_register_mux(NULL, "uart4_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART4_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART4_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "a9200000.serial"); clk = clk_register_mux(NULL, "uart5_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART5_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART5_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "60000000.serial"); clk = clk_register_mux(NULL, "uart6_clk", uartx_parents, - ARRAY_SIZE(uartx_parents), 0, SPEAR320_EXT_CTRL_REG, - SPEAR320_UART6_PCLK_SHIFT, SPEAR320_UARTX_PCLK_MASK, 0, - &_lock); + ARRAY_SIZE(uartx_parents), CLK_SET_RATE_PARENT, + SPEAR320_EXT_CTRL_REG, SPEAR320_UART6_PCLK_SHIFT, + SPEAR320_UARTX_PCLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "60100000.serial"); } +#else +static inline void spear320_clk_init(void) { } #endif void __init spear3xx_clk_init(void) { struct clk *clk, *clk1; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); clk_register_clkdev(clk, "osc_32k_clk", NULL); @@ -380,7 +401,8 @@ void __init spear3xx_clk_init(void) clk_register_clkdev(clk1, "pll2_clk", NULL); /* clock derived from pll1 clk */ - clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1); + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", + CLK_SET_RATE_PARENT, 1, 1); clk_register_clkdev(clk, "cpu_clk", NULL); clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", @@ -395,12 +417,14 @@ void __init spear3xx_clk_init(void) clk_register_clkdev(clk1, "uart_syn_gclk", NULL); clk = clk_register_mux(NULL, "uart0_mclk", uart0_parents, - ARRAY_SIZE(uart0_parents), 0, PERIP_CLK_CFG, - UART_CLK_SHIFT, UART_CLK_MASK, 0, &_lock); + ARRAY_SIZE(uart0_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, UART_CLK_SHIFT, UART_CLK_MASK, 0, + &_lock); clk_register_clkdev(clk, "uart0_mclk", NULL); - clk = clk_register_gate(NULL, "uart0", "uart0_mclk", 0, PERIP1_CLK_ENB, - UART_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "uart0", "uart0_mclk", + CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, UART_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, NULL, "d0000000.serial"); clk = clk_register_aux("firda_syn_clk", "firda_syn_gclk", "pll1_clk", 0, @@ -410,40 +434,44 @@ void __init spear3xx_clk_init(void) clk_register_clkdev(clk1, "firda_syn_gclk", NULL); clk = clk_register_mux(NULL, "firda_mclk", firda_parents, - ARRAY_SIZE(firda_parents), 0, PERIP_CLK_CFG, - FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, &_lock); + ARRAY_SIZE(firda_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, FIRDA_CLK_SHIFT, FIRDA_CLK_MASK, 0, + &_lock); clk_register_clkdev(clk, "firda_mclk", NULL); - clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", 0, - PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "firda_clk", "firda_mclk", + CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, FIRDA_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, NULL, "firda"); /* gpt clocks */ clk_register_gpt("gpt0_syn_clk", "pll1_clk", 0, PRSC0_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); clk = clk_register_mux(NULL, "gpt0_clk", gpt0_parents, - ARRAY_SIZE(gpt0_parents), 0, PERIP_CLK_CFG, - GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + ARRAY_SIZE(gpt0_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, GPT0_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, NULL, "gpt0"); clk_register_gpt("gpt1_syn_clk", "pll1_clk", 0, PRSC1_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); clk = clk_register_mux(NULL, "gpt1_mclk", gpt1_parents, - ARRAY_SIZE(gpt1_parents), 0, PERIP_CLK_CFG, - GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + ARRAY_SIZE(gpt1_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, GPT1_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "gpt1_mclk", NULL); - clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", 0, - PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "gpt1_clk", "gpt1_mclk", + CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, GPT1_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, NULL, "gpt1"); clk_register_gpt("gpt2_syn_clk", "pll1_clk", 0, PRSC2_CLK_CFG, gpt_rtbl, ARRAY_SIZE(gpt_rtbl), &_lock); clk = clk_register_mux(NULL, "gpt2_mclk", gpt2_parents, - ARRAY_SIZE(gpt2_parents), 0, PERIP_CLK_CFG, - GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); + ARRAY_SIZE(gpt2_parents), CLK_SET_RATE_PARENT, + PERIP_CLK_CFG, GPT2_CLK_SHIFT, GPT_CLK_MASK, 0, &_lock); clk_register_clkdev(clk, "gpt2_mclk", NULL); - clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", 0, - PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "gpt2_clk", "gpt2_mclk", + CLK_SET_RATE_PARENT, PERIP1_CLK_ENB, GPT2_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, NULL, "gpt2"); /* general synths clocks */ @@ -480,7 +508,9 @@ void __init spear3xx_clk_init(void) /* clock derived from pll3 clk */ clk = clk_register_gate(NULL, "usbh_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBH_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, "usbh_clk", NULL); + clk_register_clkdev(clk, NULL, "e1800000.ehci"); + clk_register_clkdev(clk, NULL, "e1900000.ohci"); + clk_register_clkdev(clk, NULL, "e2100000.ohci"); clk = clk_register_fixed_factor(NULL, "usbh.0_clk", "usbh_clk", 0, 1, 1); @@ -492,7 +522,7 @@ void __init spear3xx_clk_init(void) clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "designware_udc"); + clk_register_clkdev(clk, NULL, "e1100000.usbd"); /* clock derived from ahb clk */ clk = clk_register_fixed_factor(NULL, "ahbmult2_clk", "ahb_clk", 0, 2, @@ -540,7 +570,7 @@ void __init spear3xx_clk_init(void) /* clock derived from apb clk */ clk = clk_register_gate(NULL, "adc_clk", "apb_clk", 0, PERIP1_CLK_ENB, ADC_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "adc"); + clk_register_clkdev(clk, NULL, "d0080000.adc"); clk = clk_register_gate(NULL, "gpio0_clk", "apb_clk", 0, PERIP1_CLK_ENB, GPIO_CLK_ENB, 0, &_lock); @@ -579,20 +609,24 @@ void __init spear3xx_clk_init(void) RAS_CLK_ENB, RAS_48M_CLK_ENB, 0, &_lock); clk_register_clkdev(clk, "ras_pll3_clk", NULL); - clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", 0, - RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "ras_syn0_gclk", "gen0_syn_gclk", + CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT0_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, "ras_syn0_gclk", NULL); - clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", 0, - RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "ras_syn1_gclk", "gen1_syn_gclk", + CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT1_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, "ras_syn1_gclk", NULL); - clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", 0, - RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "ras_syn2_gclk", "gen2_syn_gclk", + CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT2_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, "ras_syn2_gclk", NULL); - clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", 0, - RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, &_lock); + clk = clk_register_gate(NULL, "ras_syn3_gclk", "gen3_syn_gclk", + CLK_SET_RATE_PARENT, RAS_CLK_ENB, RAS_SYNT3_CLK_ENB, 0, + &_lock); clk_register_clkdev(clk, "ras_syn3_gclk", NULL); if (of_machine_is_compatible("st,spear300")) diff --git a/drivers/clk/spear/spear6xx_clock.c b/drivers/clk/spear/spear6xx_clock.c index a98d0866f541..e862a333ad30 100644 --- a/drivers/clk/spear/spear6xx_clock.c +++ b/drivers/clk/spear/spear6xx_clock.c @@ -92,6 +92,7 @@ static struct pll_rate_tbl pll_rtbl[] = { /* aux rate configuration table, in ascending order of rates */ static struct aux_rate_tbl aux_rtbl[] = { /* For PLL1 = 332 MHz */ + {.xscale = 2, .yscale = 27, .eq = 0}, /* 12.296 MHz */ {.xscale = 2, .yscale = 8, .eq = 0}, /* 41.5 MHz */ {.xscale = 2, .yscale = 4, .eq = 0}, /* 83 MHz */ {.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */ @@ -118,9 +119,6 @@ void __init spear6xx_clk_init(void) { struct clk *clk, *clk1; - clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); - clk_register_clkdev(clk, "apb_pclk", NULL); - clk = clk_register_fixed_rate(NULL, "osc_32k_clk", NULL, CLK_IS_ROOT, 32000); clk_register_clkdev(clk, "osc_32k_clk", NULL); @@ -156,7 +154,8 @@ void __init spear6xx_clk_init(void) clk_register_clkdev(clk, NULL, "wdt"); /* clock derived from pll1 clk */ - clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", 0, 1, 1); + clk = clk_register_fixed_factor(NULL, "cpu_clk", "pll1_clk", + CLK_SET_RATE_PARENT, 1, 1); clk_register_clkdev(clk, "cpu_clk", NULL); clk = clk_register_divider(NULL, "ahb_clk", "pll1_clk", @@ -261,11 +260,13 @@ void __init spear6xx_clk_init(void) /* clock derived from pll3 clk */ clk = clk_register_gate(NULL, "usbh0_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBH0_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "usbh.0_clk"); + clk_register_clkdev(clk, NULL, "e1800000.ehci"); + clk_register_clkdev(clk, NULL, "e1900000.ohci"); clk = clk_register_gate(NULL, "usbh1_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBH1_CLK_ENB, 0, &_lock); - clk_register_clkdev(clk, NULL, "usbh.1_clk"); + clk_register_clkdev(clk, NULL, "e2000000.ehci"); + clk_register_clkdev(clk, NULL, "e2100000.ohci"); clk = clk_register_gate(NULL, "usbd_clk", "pll3_clk", 0, PERIP1_CLK_ENB, USBD_CLK_ENB, 0, &_lock); diff --git a/drivers/clk/ux500/Makefile b/drivers/clk/ux500/Makefile index 858fbfe66281..bcc0c11a507c 100644 --- a/drivers/clk/ux500/Makefile +++ b/drivers/clk/ux500/Makefile @@ -10,3 +10,6 @@ obj-y += clk-prcmu.o obj-y += u8500_clk.o obj-y += u9540_clk.o obj-y += u8540_clk.o + +# ABX500 clock driver +obj-y += abx500-clk.o diff --git a/drivers/clk/ux500/abx500-clk.c b/drivers/clk/ux500/abx500-clk.c new file mode 100644 index 000000000000..e27c52317ffe --- /dev/null +++ b/drivers/clk/ux500/abx500-clk.c @@ -0,0 +1,73 @@ +/* + * abx500 clock implementation for ux500 platform. + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/err.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mfd/abx500/ab8500.h> + +/* TODO: Add clock implementations here */ + + +/* Clock definitions for ab8500 */ +static int ab8500_reg_clks(struct device *dev) +{ + return 0; +} + +/* Clock definitions for ab8540 */ +static int ab8540_reg_clks(struct device *dev) +{ + return 0; +} + +/* Clock definitions for ab9540 */ +static int ab9540_reg_clks(struct device *dev) +{ + return 0; +} + +static int __devinit abx500_clk_probe(struct platform_device *pdev) +{ + struct ab8500 *parent = dev_get_drvdata(pdev->dev.parent); + int ret; + + if (is_ab8500(parent) || is_ab8505(parent)) { + ret = ab8500_reg_clks(&pdev->dev); + } else if (is_ab8540(parent)) { + ret = ab8540_reg_clks(&pdev->dev); + } else if (is_ab9540(parent)) { + ret = ab9540_reg_clks(&pdev->dev); + } else { + dev_err(&pdev->dev, "non supported plf id\n"); + return -ENODEV; + } + + return ret; +} + +static struct platform_driver abx500_clk_driver = { + .driver = { + .name = "abx500-clk", + .owner = THIS_MODULE, + }, + .probe = abx500_clk_probe, +}; + +static int __init abx500_clk_init(void) +{ + return platform_driver_register(&abx500_clk_driver); +} + +arch_initcall(abx500_clk_init); + +MODULE_AUTHOR("Ulf Hansson <ulf.hansson@linaro.org"); +MODULE_DESCRIPTION("ABX500 clk driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/clk/ux500/clk-prcmu.c b/drivers/clk/ux500/clk-prcmu.c index 930cdfeb47ab..74faa7e3cf59 100644 --- a/drivers/clk/ux500/clk-prcmu.c +++ b/drivers/clk/ux500/clk-prcmu.c @@ -133,6 +133,40 @@ out_error: hw->init->name); } +static int clk_prcmu_opp_volt_prepare(struct clk_hw *hw) +{ + int err; + struct clk_prcmu *clk = to_clk_prcmu(hw); + + err = prcmu_request_ape_opp_100_voltage(true); + if (err) { + pr_err("clk_prcmu: %s failed to request APE OPP VOLT for %s.\n", + __func__, hw->init->name); + return err; + } + + err = prcmu_request_clock(clk->cg_sel, true); + if (err) + prcmu_request_ape_opp_100_voltage(false); + + return err; +} + +static void clk_prcmu_opp_volt_unprepare(struct clk_hw *hw) +{ + struct clk_prcmu *clk = to_clk_prcmu(hw); + + if (prcmu_request_clock(clk->cg_sel, false)) + goto out_error; + if (prcmu_request_ape_opp_100_voltage(false)) + goto out_error; + return; + +out_error: + pr_err("clk_prcmu: %s failed to disable %s.\n", __func__, + hw->init->name); +} + static struct clk_ops clk_prcmu_scalable_ops = { .prepare = clk_prcmu_prepare, .unprepare = clk_prcmu_unprepare, @@ -153,6 +187,13 @@ static struct clk_ops clk_prcmu_gate_ops = { .recalc_rate = clk_prcmu_recalc_rate, }; +static struct clk_ops clk_prcmu_scalable_rate_ops = { + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, + .round_rate = clk_prcmu_round_rate, + .set_rate = clk_prcmu_set_rate, +}; + static struct clk_ops clk_prcmu_rate_ops = { .is_enabled = clk_prcmu_is_enabled, .recalc_rate = clk_prcmu_recalc_rate, @@ -167,6 +208,17 @@ static struct clk_ops clk_prcmu_opp_gate_ops = { .recalc_rate = clk_prcmu_recalc_rate, }; +static struct clk_ops clk_prcmu_opp_volt_scalable_ops = { + .prepare = clk_prcmu_opp_volt_prepare, + .unprepare = clk_prcmu_opp_volt_unprepare, + .enable = clk_prcmu_enable, + .disable = clk_prcmu_disable, + .is_enabled = clk_prcmu_is_enabled, + .recalc_rate = clk_prcmu_recalc_rate, + .round_rate = clk_prcmu_round_rate, + .set_rate = clk_prcmu_set_rate, +}; + static struct clk *clk_reg_prcmu(const char *name, const char *parent_name, u8 cg_sel, @@ -233,6 +285,16 @@ struct clk *clk_reg_prcmu_gate(const char *name, &clk_prcmu_gate_ops); } +struct clk *clk_reg_prcmu_scalable_rate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags, + &clk_prcmu_scalable_rate_ops); +} + struct clk *clk_reg_prcmu_rate(const char *name, const char *parent_name, u8 cg_sel, @@ -250,3 +312,13 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name, return clk_reg_prcmu(name, parent_name, cg_sel, 0, flags, &clk_prcmu_opp_gate_ops); } + +struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags) +{ + return clk_reg_prcmu(name, parent_name, cg_sel, rate, flags, + &clk_prcmu_opp_volt_scalable_ops); +} diff --git a/drivers/clk/ux500/clk.h b/drivers/clk/ux500/clk.h index 836d7d16751e..c3e449169a83 100644 --- a/drivers/clk/ux500/clk.h +++ b/drivers/clk/ux500/clk.h @@ -35,6 +35,12 @@ struct clk *clk_reg_prcmu_gate(const char *name, u8 cg_sel, unsigned long flags); +struct clk *clk_reg_prcmu_scalable_rate(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags); + struct clk *clk_reg_prcmu_rate(const char *name, const char *parent_name, u8 cg_sel, @@ -45,4 +51,10 @@ struct clk *clk_reg_prcmu_opp_gate(const char *name, u8 cg_sel, unsigned long flags); +struct clk *clk_reg_prcmu_opp_volt_scalable(const char *name, + const char *parent_name, + u8 cg_sel, + unsigned long rate, + unsigned long flags); + #endif /* __UX500_CLK_H */ diff --git a/drivers/clk/ux500/u8500_clk.c b/drivers/clk/ux500/u8500_clk.c index e2c17d187d98..7d0e0258f204 100644 --- a/drivers/clk/ux500/u8500_clk.c +++ b/drivers/clk/ux500/u8500_clk.c @@ -170,10 +170,11 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "mtu0"); clk_register_clkdev(clk, NULL, "mtu1"); - clk = clk_reg_prcmu_gate("sdmmcclk", NULL, PRCMU_SDMMCCLK, CLK_IS_ROOT); + clk = clk_reg_prcmu_opp_volt_scalable("sdmmcclk", NULL, PRCMU_SDMMCCLK, + 100000000, + CLK_IS_ROOT|CLK_SET_RATE_GATE); clk_register_clkdev(clk, NULL, "sdmmc"); - clk = clk_reg_prcmu_scalable("dsi_pll", "hdmiclk", PRCMU_PLLDSI, 0, CLK_SET_RATE_GATE); clk_register_clkdev(clk, "dsihs2", "mcde"); @@ -205,16 +206,18 @@ void u8500_clk_init(void) clk_register_clkdev(clk, "dsilp2", "dsilink.2"); clk_register_clkdev(clk, "dsilp2", "mcde"); - clk = clk_reg_prcmu_rate("smp_twd", NULL, PRCMU_ARMSS, - CLK_IS_ROOT|CLK_GET_RATE_NOCACHE| - CLK_IGNORE_UNUSED); + clk = clk_reg_prcmu_scalable_rate("armss", NULL, + PRCMU_ARMSS, 0, CLK_IS_ROOT|CLK_IGNORE_UNUSED); + clk_register_clkdev(clk, "armss", NULL); + + clk = clk_register_fixed_factor(NULL, "smp_twd", "armss", + CLK_IGNORE_UNUSED, 1, 2); clk_register_clkdev(clk, NULL, "smp_twd"); /* * FIXME: Add special handled PRCMU clocks here: - * 1. clk_arm, use PRCMU_ARMCLK. - * 2. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. - * 3. ab9540_clkout1yuv, see clkout0yuv + * 1. clkout0yuv, use PRCMU as parent + need regulator + pinctrl. + * 2. ab9540_clkout1yuv, see clkout0yuv */ /* PRCC P-clocks */ @@ -323,7 +326,7 @@ void u8500_clk_init(void) clk_register_clkdev(clk, NULL, "gpioblock1"); clk = clk_reg_prcc_pclk("p2_pclk12", "per2clk", U8500_CLKRST2_BASE, - BIT(11), 0); + BIT(12), 0); clk = clk_reg_prcc_pclk("p3_pclk0", "per3clk", U8500_CLKRST3_BASE, BIT(0), 0); @@ -347,6 +350,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p3_pclk5", "per3clk", U8500_CLKRST3_BASE, BIT(5), 0); + clk_register_clkdev(clk, "apb_pclk", "ske"); + clk_register_clkdev(clk, "apb_pclk", "nmk-ske-keypad"); clk = clk_reg_prcc_pclk("p3_pclk6", "per3clk", U8500_CLKRST3_BASE, BIT(6), 0); @@ -375,6 +380,7 @@ void u8500_clk_init(void) clk = clk_reg_prcc_pclk("p6_pclk0", "per6clk", U8500_CLKRST6_BASE, BIT(0), 0); + clk_register_clkdev(clk, "apb_pclk", "rng"); clk = clk_reg_prcc_pclk("p6_pclk1", "per6clk", U8500_CLKRST6_BASE, BIT(1), 0); @@ -503,6 +509,8 @@ void u8500_clk_init(void) clk = clk_reg_prcc_kclk("p3_ske_kclk", "rtc32k", U8500_CLKRST3_BASE, BIT(5), CLK_SET_RATE_GATE); + clk_register_clkdev(clk, NULL, "ske"); + clk_register_clkdev(clk, NULL, "nmk-ske-keypad"); clk = clk_reg_prcc_kclk("p3_uart2_kclk", "uartclk", U8500_CLKRST3_BASE, BIT(6), CLK_SET_RATE_GATE); @@ -515,5 +523,5 @@ void u8500_clk_init(void) /* Periph6 */ clk = clk_reg_prcc_kclk("p3_rng_kclk", "rngclk", U8500_CLKRST6_BASE, BIT(0), CLK_SET_RATE_GATE); - + clk_register_clkdev(clk, NULL, "rng"); } diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile index c0a0f6478798..ec3b88fe3e6d 100644 --- a/drivers/clk/versatile/Makefile +++ b/drivers/clk/versatile/Makefile @@ -1,4 +1,7 @@ # Makefile for Versatile-specific clocks obj-$(CONFIG_ICST) += clk-icst.o obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o +obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o +obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o +obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o diff --git a/drivers/clk/versatile/clk-icst.c b/drivers/clk/versatile/clk-icst.c index f555b50a5fa5..67ccf4aa7277 100644 --- a/drivers/clk/versatile/clk-icst.c +++ b/drivers/clk/versatile/clk-icst.c @@ -3,6 +3,12 @@ * We wrap the custom interface from <asm/hardware/icst.h> into the generic * clock framework. * + * Copyright (C) 2012 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * * TODO: when all ARM reference designs are migrated to generic clocks, the * ICST clock code from the ARM tree should probably be merged into this * file. @@ -11,33 +17,74 @@ #include <linux/clkdev.h> #include <linux/err.h> #include <linux/clk-provider.h> +#include <linux/io.h> #include "clk-icst.h" /** * struct clk_icst - ICST VCO clock wrapper * @hw: corresponding clock hardware entry + * @vcoreg: VCO register address + * @lockreg: VCO lock register address * @params: parameters for this ICST instance * @rate: current rate - * @setvco: function to commit ICST settings to hardware */ struct clk_icst { struct clk_hw hw; + void __iomem *vcoreg; + void __iomem *lockreg; const struct icst_params *params; unsigned long rate; - struct icst_vco (*getvco)(void); - void (*setvco)(struct icst_vco); }; #define to_icst(_hw) container_of(_hw, struct clk_icst, hw) +/** + * vco_get() - get ICST VCO settings from a certain register + * @vcoreg: register containing the VCO settings + */ +static struct icst_vco vco_get(void __iomem *vcoreg) +{ + u32 val; + struct icst_vco vco; + + val = readl(vcoreg); + vco.v = val & 0x1ff; + vco.r = (val >> 9) & 0x7f; + vco.s = (val >> 16) & 03; + return vco; +} + +/** + * vco_set() - commit changes to an ICST VCO + * @locreg: register to poke to unlock the VCO for writing + * @vcoreg: register containing the VCO settings + * @vco: ICST VCO parameters to commit + */ +static void vco_set(void __iomem *lockreg, + void __iomem *vcoreg, + struct icst_vco vco) +{ + u32 val; + + val = readl(vcoreg) & ~0x7ffff; + val |= vco.v | (vco.r << 9) | (vco.s << 16); + + /* This magic unlocks the VCO so it can be controlled */ + writel(0xa05f, lockreg); + writel(val, vcoreg); + /* This locks the VCO again */ + writel(0, lockreg); +} + + static unsigned long icst_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_icst *icst = to_icst(hw); struct icst_vco vco; - vco = icst->getvco(); + vco = vco_get(icst->vcoreg); icst->rate = icst_hz(icst->params, vco); return icst->rate; } @@ -60,7 +107,7 @@ static int icst_set_rate(struct clk_hw *hw, unsigned long rate, vco = icst_hz_to_vco(icst->params, rate); icst->rate = icst_hz(icst->params, vco); - icst->setvco(vco); + vco_set(icst->vcoreg, icst->lockreg, vco); return 0; } @@ -70,8 +117,9 @@ static const struct clk_ops icst_ops = { .set_rate = icst_set_rate, }; -struct clk * __init icst_clk_register(struct device *dev, - const struct clk_icst_desc *desc) +struct clk *icst_clk_register(struct device *dev, + const struct clk_icst_desc *desc, + void __iomem *base) { struct clk *clk; struct clk_icst *icst; @@ -89,8 +137,8 @@ struct clk * __init icst_clk_register(struct device *dev, init.num_parents = 0; icst->hw.init = &init; icst->params = desc->params; - icst->getvco = desc->getvco; - icst->setvco = desc->setvco; + icst->vcoreg = base + desc->vco_offset; + icst->lockreg = base + desc->lock_offset; clk = clk_register(dev, &icst->hw); if (IS_ERR(clk)) diff --git a/drivers/clk/versatile/clk-icst.h b/drivers/clk/versatile/clk-icst.h index 71b4c56c1410..dad51b6ffd00 100644 --- a/drivers/clk/versatile/clk-icst.h +++ b/drivers/clk/versatile/clk-icst.h @@ -1,10 +1,18 @@ #include <asm/hardware/icst.h> +/** + * struct clk_icst_desc - descriptor for the ICST VCO + * @params: ICST parameters + * @vco_offset: offset to the ICST VCO from the provided memory base + * @lock_offset: offset to the ICST VCO locking register from the provided + * memory base + */ struct clk_icst_desc { const struct icst_params *params; - struct icst_vco (*getvco)(void); - void (*setvco)(struct icst_vco); + u32 vco_offset; + u32 lock_offset; }; struct clk *icst_clk_register(struct device *dev, - const struct clk_icst_desc *desc); + const struct clk_icst_desc *desc, + void __iomem *base); diff --git a/drivers/clk/versatile/clk-impd1.c b/drivers/clk/versatile/clk-impd1.c new file mode 100644 index 000000000000..369139af2a3b --- /dev/null +++ b/drivers/clk/versatile/clk-impd1.c @@ -0,0 +1,97 @@ +/* + * Clock driver for the ARM Integrator/IM-PD1 board + * Copyright (C) 2012 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk-provider.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/platform_data/clk-integrator.h> + +#include <mach/impd1.h> + +#include "clk-icst.h" + +struct impd1_clk { + struct clk *vcoclk; + struct clk *uartclk; + struct clk_lookup *clks[3]; +}; + +static struct impd1_clk impd1_clks[4]; + +/* + * There are two VCO's on the IM-PD1 but only one is used by the + * kernel, that is why we are only implementing the control of + * IMPD1_OSC1 here. + */ + +static const struct icst_params impd1_vco_params = { + .ref = 24000000, /* 24 MHz */ + .vco_max = ICST525_VCO_MAX_3V, + .vco_min = ICST525_VCO_MIN, + .vd_min = 12, + .vd_max = 519, + .rd_min = 3, + .rd_max = 120, + .s2div = icst525_s2div, + .idx2s = icst525_idx2s, +}; + +static const struct clk_icst_desc impd1_icst1_desc = { + .params = &impd1_vco_params, + .vco_offset = IMPD1_OSC1, + .lock_offset = IMPD1_LOCK, +}; + +/** + * integrator_impd1_clk_init() - set up the integrator clock tree + * @base: base address of the logic module (LM) + * @id: the ID of this LM + */ +void integrator_impd1_clk_init(void __iomem *base, unsigned int id) +{ + struct impd1_clk *imc; + struct clk *clk; + int i; + + if (id > 3) { + pr_crit("no more than 4 LMs can be attached\n"); + return; + } + imc = &impd1_clks[id]; + + clk = icst_clk_register(NULL, &impd1_icst1_desc, base); + imc->vcoclk = clk; + imc->clks[0] = clkdev_alloc(clk, NULL, "lm%x:01000", id); + + /* UART reference clock */ + clk = clk_register_fixed_rate(NULL, "uartclk", NULL, CLK_IS_ROOT, + 14745600); + imc->uartclk = clk; + imc->clks[1] = clkdev_alloc(clk, NULL, "lm%x:00100", id); + imc->clks[2] = clkdev_alloc(clk, NULL, "lm%x:00200", id); + + for (i = 0; i < ARRAY_SIZE(imc->clks); i++) + clkdev_add(imc->clks[i]); +} + +void integrator_impd1_clk_exit(unsigned int id) +{ + int i; + struct impd1_clk *imc; + + if (id > 3) + return; + imc = &impd1_clks[id]; + + for (i = 0; i < ARRAY_SIZE(imc->clks); i++) + clkdev_drop(imc->clks[i]); + clk_unregister(imc->uartclk); + clk_unregister(imc->vcoclk); +} diff --git a/drivers/clk/versatile/clk-integrator.c b/drivers/clk/versatile/clk-integrator.c index a5053921bf7f..08593b4ee2c9 100644 --- a/drivers/clk/versatile/clk-integrator.c +++ b/drivers/clk/versatile/clk-integrator.c @@ -1,8 +1,16 @@ +/* + * Clock driver for the ARM Integrator/AP and Integrator/CP boards + * Copyright (C) 2012 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/clk-provider.h> #include <linux/clk.h> #include <linux/clkdev.h> #include <linux/err.h> -#include <linux/io.h> -#include <linux/clk-provider.h> +#include <linux/platform_data/clk-integrator.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -14,42 +22,6 @@ * Inspired by portions of: * plat-versatile/clock.c and plat-versatile/include/plat/clock.h */ -#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET) -#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c) - -/** - * cp_auxvco_get() - get ICST VCO settings for the Integrator/CP - * @vco: ICST VCO parameters to update with hardware status - */ -static struct icst_vco cp_auxvco_get(void) -{ - u32 val; - struct icst_vco vco; - - val = readl(CM_AUXOSC); - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 03; - return vco; -} - -/** - * cp_auxvco_set() - commit changes to Integrator/CP ICST VCO - * @vco: ICST VCO parameters to commit - */ -static void cp_auxvco_set(struct icst_vco vco) -{ - u32 val; - - val = readl(CM_AUXOSC) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - /* This magic unlocks the CM VCO so it can be controlled */ - writel(0xa05f, CM_LOCK); - writel(val, CM_AUXOSC); - /* This locks the CM again */ - writel(0, CM_LOCK); -} static const struct icst_params cp_auxvco_params = { .ref = 24000000, @@ -65,8 +37,8 @@ static const struct icst_params cp_auxvco_params = { static const struct clk_icst_desc __initdata cp_icst_desc = { .params = &cp_auxvco_params, - .getvco = cp_auxvco_get, - .setvco = cp_auxvco_set, + .vco_offset = 0x1c, + .lock_offset = INTEGRATOR_HDR_LOCK_OFFSET, }; /* @@ -106,6 +78,7 @@ void __init integrator_clk_init(bool is_cp) clk_register_clkdev(clk, NULL, "sp804"); /* ICST VCO clock used on the Integrator/CP CLCD */ - clk = icst_clk_register(NULL, &cp_icst_desc); + clk = icst_clk_register(NULL, &cp_icst_desc, + __io_address(INTEGRATOR_HDR_BASE)); clk_register_clkdev(clk, NULL, "clcd"); } diff --git a/drivers/clk/versatile/clk-realview.c b/drivers/clk/versatile/clk-realview.c index e21a99cef378..cda07e70a408 100644 --- a/drivers/clk/versatile/clk-realview.c +++ b/drivers/clk/versatile/clk-realview.c @@ -1,3 +1,11 @@ +/* + * Clock driver for the ARM RealView boards + * Copyright (C) 2012 Linus Walleij + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ #include <linux/clk.h> #include <linux/clkdev.h> #include <linux/err.h> @@ -13,38 +21,6 @@ * Implementation of the ARM RealView clock trees. */ -static void __iomem *sys_lock; -static void __iomem *sys_vcoreg; - -/** - * realview_oscvco_get() - get ICST OSC settings for the RealView - */ -static struct icst_vco realview_oscvco_get(void) -{ - u32 val; - struct icst_vco vco; - - val = readl(sys_vcoreg); - vco.v = val & 0x1ff; - vco.r = (val >> 9) & 0x7f; - vco.s = (val >> 16) & 03; - return vco; -} - -static void realview_oscvco_set(struct icst_vco vco) -{ - u32 val; - - val = readl(sys_vcoreg) & ~0x7ffff; - val |= vco.v | (vco.r << 9) | (vco.s << 16); - - /* This magic unlocks the CM VCO so it can be controlled */ - writel(0xa05f, sys_lock); - writel(val, sys_vcoreg); - /* This locks the CM again */ - writel(0, sys_lock); -} - static const struct icst_params realview_oscvco_params = { .ref = 24000000, .vco_max = ICST307_VCO_MAX, @@ -57,10 +33,16 @@ static const struct icst_params realview_oscvco_params = { .idx2s = icst307_idx2s, }; -static const struct clk_icst_desc __initdata realview_icst_desc = { +static const struct clk_icst_desc __initdata realview_osc0_desc = { + .params = &realview_oscvco_params, + .vco_offset = REALVIEW_SYS_OSC0_OFFSET, + .lock_offset = REALVIEW_SYS_LOCK_OFFSET, +}; + +static const struct clk_icst_desc __initdata realview_osc4_desc = { .params = &realview_oscvco_params, - .getvco = realview_oscvco_get, - .setvco = realview_oscvco_set, + .vco_offset = REALVIEW_SYS_OSC4_OFFSET, + .lock_offset = REALVIEW_SYS_LOCK_OFFSET, }; /* @@ -70,13 +52,6 @@ void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176) { struct clk *clk; - sys_lock = sysbase + REALVIEW_SYS_LOCK_OFFSET; - if (is_pb1176) - sys_vcoreg = sysbase + REALVIEW_SYS_OSC0_OFFSET; - else - sys_vcoreg = sysbase + REALVIEW_SYS_OSC4_OFFSET; - - /* APB clock dummy */ clk = clk_register_fixed_rate(NULL, "apb_pclk", NULL, CLK_IS_ROOT, 0); clk_register_clkdev(clk, "apb_pclk", NULL); @@ -108,7 +83,11 @@ void __init realview_clk_init(void __iomem *sysbase, bool is_pb1176) clk_register_clkdev(clk, NULL, "sp804"); /* ICST VCO clock */ - clk = icst_clk_register(NULL, &realview_icst_desc); + if (is_pb1176) + clk = icst_clk_register(NULL, &realview_osc0_desc, sysbase); + else + clk = icst_clk_register(NULL, &realview_osc4_desc, sysbase); + clk_register_clkdev(clk, NULL, "dev:clcd"); clk_register_clkdev(clk, NULL, "issp:clcd"); } diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c new file mode 100644 index 000000000000..dcb6ae0a0425 --- /dev/null +++ b/drivers/clk/versatile/clk-vexpress-osc.c @@ -0,0 +1,146 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#define pr_fmt(fmt) "vexpress-osc: " fmt + +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/vexpress.h> + +struct vexpress_osc { + struct vexpress_config_func *func; + struct clk_hw hw; + unsigned long rate_min; + unsigned long rate_max; +}; + +#define to_vexpress_osc(osc) container_of(osc, struct vexpress_osc, hw) + +static unsigned long vexpress_osc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + u32 rate; + + vexpress_config_read(osc->func, 0, &rate); + + return rate; +} + +static long vexpress_osc_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + + if (WARN_ON(osc->rate_min && rate < osc->rate_min)) + rate = osc->rate_min; + + if (WARN_ON(osc->rate_max && rate > osc->rate_max)) + rate = osc->rate_max; + + return rate; +} + +static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct vexpress_osc *osc = to_vexpress_osc(hw); + + return vexpress_config_write(osc->func, 0, rate); +} + +static struct clk_ops vexpress_osc_ops = { + .recalc_rate = vexpress_osc_recalc_rate, + .round_rate = vexpress_osc_round_rate, + .set_rate = vexpress_osc_set_rate, +}; + + +struct clk * __init vexpress_osc_setup(struct device *dev) +{ + struct clk_init_data init; + struct vexpress_osc *osc = kzalloc(sizeof(*osc), GFP_KERNEL); + + if (!osc) + return NULL; + + osc->func = vexpress_config_func_get_by_dev(dev); + if (!osc->func) { + kfree(osc); + return NULL; + } + + init.name = dev_name(dev); + init.ops = &vexpress_osc_ops; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + osc->hw.init = &init; + + return clk_register(NULL, &osc->hw); +} + +void __init vexpress_osc_of_setup(struct device_node *node) +{ + struct clk_init_data init; + struct vexpress_osc *osc; + struct clk *clk; + u32 range[2]; + + osc = kzalloc(sizeof(*osc), GFP_KERNEL); + if (!osc) + goto error; + + osc->func = vexpress_config_func_get_by_node(node); + if (!osc->func) { + pr_err("Failed to obtain config func for node '%s'!\n", + node->name); + goto error; + } + + if (of_property_read_u32_array(node, "freq-range", range, + ARRAY_SIZE(range)) == 0) { + osc->rate_min = range[0]; + osc->rate_max = range[1]; + } + + of_property_read_string(node, "clock-output-names", &init.name); + if (!init.name) + init.name = node->name; + + init.ops = &vexpress_osc_ops; + init.flags = CLK_IS_ROOT; + init.num_parents = 0; + + osc->hw.init = &init; + + clk = clk_register(NULL, &osc->hw); + if (IS_ERR(clk)) { + pr_err("Failed to register clock '%s'!\n", init.name); + goto error; + } + + of_clk_add_provider(node, of_clk_src_simple_get, clk); + + pr_debug("Registered clock '%s'\n", init.name); + + return; + +error: + if (osc->func) + vexpress_config_func_put(osc->func); + kfree(osc); +} diff --git a/drivers/clk/versatile/clk-vexpress.c b/drivers/clk/versatile/clk-vexpress.c new file mode 100644 index 000000000000..c742ac7c60bb --- /dev/null +++ b/drivers/clk/versatile/clk-vexpress.c @@ -0,0 +1,142 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + */ + +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/vexpress.h> + +#include <asm/hardware/sp810.h> + +static struct clk *vexpress_sp810_timerclken[4]; +static DEFINE_SPINLOCK(vexpress_sp810_lock); + +static void __init vexpress_sp810_init(void __iomem *base) +{ + int i; + + if (WARN_ON(!base)) + return; + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) { + char name[12]; + const char *parents[] = { + "v2m:refclk32khz", /* REFCLK */ + "v2m:refclk1mhz" /* TIMCLK */ + }; + + snprintf(name, ARRAY_SIZE(name), "timerclken%d", i); + + vexpress_sp810_timerclken[i] = clk_register_mux(NULL, name, + parents, 2, 0, base + SCCTRL, + SCCTRL_TIMERENnSEL_SHIFT(i), 1, + 0, &vexpress_sp810_lock); + + if (WARN_ON(IS_ERR(vexpress_sp810_timerclken[i]))) + break; + } +} + + +static const char * const vexpress_clk_24mhz_periphs[] __initconst = { + "mb:uart0", "mb:uart1", "mb:uart2", "mb:uart3", + "mb:mmci", "mb:kmi0", "mb:kmi1" +}; + +void __init vexpress_clk_init(void __iomem *sp810_base) +{ + struct clk *clk; + int i; + + clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL, + CLK_IS_ROOT, 0); + WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL)); + + clk = clk_register_fixed_rate(NULL, "v2m:clk_24mhz", NULL, + CLK_IS_ROOT, 24000000); + for (i = 0; i < ARRAY_SIZE(vexpress_clk_24mhz_periphs); i++) + WARN_ON(clk_register_clkdev(clk, NULL, + vexpress_clk_24mhz_periphs[i])); + + clk = clk_register_fixed_rate(NULL, "v2m:refclk32khz", NULL, + CLK_IS_ROOT, 32768); + WARN_ON(clk_register_clkdev(clk, NULL, "v2m:wdt")); + + clk = clk_register_fixed_rate(NULL, "v2m:refclk1mhz", NULL, + CLK_IS_ROOT, 1000000); + + vexpress_sp810_init(sp810_base); + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) + WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], clk)); + + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0], + "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1], + "v2m-timer1", "sp804")); +} + +#if defined(CONFIG_OF) + +struct clk *vexpress_sp810_of_get(struct of_phandle_args *clkspec, void *data) +{ + if (WARN_ON(clkspec->args_count != 1 || clkspec->args[0] > + ARRAY_SIZE(vexpress_sp810_timerclken))) + return NULL; + + return vexpress_sp810_timerclken[clkspec->args[0]]; +} + +static const __initconst struct of_device_id vexpress_fixed_clk_match[] = { + { .compatible = "fixed-clock", .data = of_fixed_clk_setup, }, + { .compatible = "arm,vexpress-osc", .data = vexpress_osc_of_setup, }, + {} +}; + +void __init vexpress_clk_of_init(void) +{ + struct device_node *node; + struct clk *clk; + struct clk *refclk, *timclk; + + of_clk_init(vexpress_fixed_clk_match); + + node = of_find_compatible_node(NULL, NULL, "arm,sp810"); + vexpress_sp810_init(of_iomap(node, 0)); + of_clk_add_provider(node, vexpress_sp810_of_get, NULL); + + /* Select "better" (faster) parent for SP804 timers */ + refclk = of_clk_get_by_name(node, "refclk"); + timclk = of_clk_get_by_name(node, "timclk"); + if (!WARN_ON(IS_ERR(refclk) || IS_ERR(timclk))) { + int i = 0; + + if (clk_get_rate(refclk) > clk_get_rate(timclk)) + clk = refclk; + else + clk = timclk; + + for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) + WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], + clk)); + } + + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0], + "v2m-timer0", "sp804")); + WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1], + "v2m-timer1", "sp804")); +} + +#endif |