1 files changed, 96 insertions, 38 deletions

diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 4b3f18e5f36b..ce69059be1fc 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -35,10 +35,8 @@ static struct device *cpu_dev;
 static struct cpufreq_frequency_table *freq_table;
 static unsigned int transition_latency;
 
-static unsigned int imx6q_get_speed(unsigned int cpu)
-{
-	return clk_get_rate(arm_clk) / 1000;
-}
+static u32 *imx6_soc_volt;
+static u32 soc_opp_count;
 
 static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 {
@@ -69,23 +67,22 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 
 	/* scaling up?  scale voltage before frequency */
 	if (new_freq > old_freq) {
+		ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_err(cpu_dev, "failed to scale vddpu up: %d\n", ret);
+			return ret;
+		}
+		ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_err(cpu_dev, "failed to scale vddsoc up: %d\n", ret);
+			return ret;
+		}
 		ret = regulator_set_voltage_tol(arm_reg, volt, 0);
 		if (ret) {
 			dev_err(cpu_dev,
 				"failed to scale vddarm up: %d\n", ret);
 			return ret;
 		}
-
-		/*
-		 * Need to increase vddpu and vddsoc for safety
-		 * if we are about to run at 1.2 GHz.
-		 */
-		if (new_freq == FREQ_1P2_GHZ / 1000) {
-			regulator_set_voltage_tol(pu_reg,
-					PU_SOC_VOLTAGE_HIGH, 0);
-			regulator_set_voltage_tol(soc_reg,
-					PU_SOC_VOLTAGE_HIGH, 0);
-		}
 	}
 
 	/*
@@ -120,12 +117,15 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 				 "failed to scale vddarm down: %d\n", ret);
 			ret = 0;
 		}
-
-		if (old_freq == FREQ_1P2_GHZ / 1000) {
-			regulator_set_voltage_tol(pu_reg,
-					PU_SOC_VOLTAGE_NORMAL, 0);
-			regulator_set_voltage_tol(soc_reg,
-					PU_SOC_VOLTAGE_NORMAL, 0);
+		ret = regulator_set_voltage_tol(soc_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to scale vddsoc down: %d\n", ret);
+			ret = 0;
+		}
+		ret = regulator_set_voltage_tol(pu_reg, imx6_soc_volt[index], 0);
+		if (ret) {
+			dev_warn(cpu_dev, "failed to scale vddpu down: %d\n", ret);
+			ret = 0;
 		}
 	}
 
@@ -134,13 +134,15 @@ static int imx6q_set_target(struct cpufreq_policy *policy, unsigned int index)
 
 static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 {
+	policy->clk = arm_clk;
 	return cpufreq_generic_init(policy, freq_table, transition_latency);
 }
 
 static struct cpufreq_driver imx6q_cpufreq_driver = {
+	.flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK,
 	.verify = cpufreq_generic_frequency_table_verify,
 	.target_index = imx6q_set_target,
-	.get = imx6q_get_speed,
+	.get = cpufreq_generic_get,
 	.init = imx6q_cpufreq_init,
 	.exit = cpufreq_generic_exit,
 	.name = "imx6q-cpufreq",
@@ -153,6 +155,9 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	struct dev_pm_opp *opp;
 	unsigned long min_volt, max_volt;
 	int num, ret;
+	const struct property *prop;
+	const __be32 *val;
+	u32 nr, i, j;
 
 	cpu_dev = get_cpu_device(0);
 	if (!cpu_dev) {
@@ -187,12 +192,25 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		goto put_node;
 	}
 
-	/* We expect an OPP table supplied by platform */
+	/*
+	 * We expect an OPP table supplied by platform.
+	 * Just, incase the platform did not supply the OPP
+	 * table, it will try to get it.
+	 */
 	num = dev_pm_opp_get_opp_count(cpu_dev);
 	if (num < 0) {
-		ret = num;
-		dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
-		goto put_node;
+		ret = of_init_opp_table(cpu_dev);
+		if (ret < 0) {
+			dev_err(cpu_dev, "failed to init OPP table: %d\n", ret);
+			goto put_node;
+		}
+
+		num = dev_pm_opp_get_opp_count(cpu_dev);
+		if (num < 0) {
+			ret = num;
+			dev_err(cpu_dev, "no OPP table is found: %d\n", ret);
+			goto put_node;
+		}
 	}
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
@@ -201,10 +219,62 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 		goto put_node;
 	}
 
+	/* Make imx6_soc_volt array's size same as arm opp number */
+	imx6_soc_volt = devm_kzalloc(cpu_dev, sizeof(*imx6_soc_volt) * num, GFP_KERNEL);
+	if (imx6_soc_volt == NULL) {
+		ret = -ENOMEM;
+		goto free_freq_table;
+	}
+
+	prop = of_find_property(np, "fsl,soc-operating-points", NULL);
+	if (!prop || !prop->value)
+		goto soc_opp_out;
+
+	/*
+	 * Each OPP is a set of tuples consisting of frequency and
+	 * voltage like <freq-kHz vol-uV>.
+	 */
+	nr = prop->length / sizeof(u32);
+	if (nr % 2 || (nr / 2) < num)
+		goto soc_opp_out;
+
+	for (j = 0; j < num; j++) {
+		val = prop->value;
+		for (i = 0; i < nr / 2; i++) {
+			unsigned long freq = be32_to_cpup(val++);
+			unsigned long volt = be32_to_cpup(val++);
+			if (freq_table[j].frequency == freq) {
+				imx6_soc_volt[soc_opp_count++] = volt;
+				break;
+			}
+		}
+	}
+
+soc_opp_out:
+	/* use fixed soc opp volt if no valid soc opp info found in dtb */
+	if (soc_opp_count != num) {
+		dev_warn(cpu_dev, "can NOT find valid fsl,soc-operating-points property in dtb, use default value!\n");
+		for (j = 0; j < num; j++)
+			imx6_soc_volt[j] = PU_SOC_VOLTAGE_NORMAL;
+		if (freq_table[num - 1].frequency * 1000 == FREQ_1P2_GHZ)
+			imx6_soc_volt[num - 1] = PU_SOC_VOLTAGE_HIGH;
+	}
+
 	if (of_property_read_u32(np, "clock-latency", &transition_latency))
 		transition_latency = CPUFREQ_ETERNAL;
 
 	/*
+	 * Calculate the ramp time for max voltage change in the
+	 * VDDSOC and VDDPU regulators.
+	 */
+	ret = regulator_set_voltage_time(soc_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
+	if (ret > 0)
+		transition_latency += ret * 1000;
+	ret = regulator_set_voltage_time(pu_reg, imx6_soc_volt[0], imx6_soc_volt[num - 1]);
+	if (ret > 0)
+		transition_latency += ret * 1000;
+
+	/*
 	 * OPP is maintained in order of increasing frequency, and
 	 * freq_table initialised from OPP is therefore sorted in the
 	 * same order.
@@ -221,18 +291,6 @@ static int imx6q_cpufreq_probe(struct platform_device *pdev)
 	if (ret > 0)
 		transition_latency += ret * 1000;
 
-	/* Count vddpu and vddsoc latency in for 1.2 GHz support */
-	if (freq_table[num].frequency == FREQ_1P2_GHZ / 1000) {
-		ret = regulator_set_voltage_time(pu_reg, PU_SOC_VOLTAGE_NORMAL,
-						 PU_SOC_VOLTAGE_HIGH);
-		if (ret > 0)
-			transition_latency += ret * 1000;
-		ret = regulator_set_voltage_time(soc_reg, PU_SOC_VOLTAGE_NORMAL,
-						 PU_SOC_VOLTAGE_HIGH);
-		if (ret > 0)
-			transition_latency += ret * 1000;
-	}
-
 	ret = cpufreq_register_driver(&imx6q_cpufreq_driver);
 	if (ret) {
 		dev_err(cpu_dev, "failed register driver: %d\n", ret);