summaryrefslogtreecommitdiff
path: root/drivers/gpio/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/Kconfig')
-rw-r--r--drivers/gpio/Kconfig35
1 files changed, 31 insertions, 4 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 633ec216e185..c1e2ca3d9a51 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -197,9 +197,16 @@ config GPIO_F7188X
To compile this driver as a module, choose M here: the module will
be called f7188x-gpio.
+config GPIO_MB86S7X
+ bool "GPIO support for Fujitsu MB86S7x Platforms"
+ depends on ARCH_MB86S7X
+ help
+ Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs.
+
config GPIO_MOXART
bool "MOXART GPIO support"
depends on ARCH_MOXART
+ select GPIO_GENERIC
help
Select this option to enable GPIO driver for
MOXA ART SoC devices.
@@ -285,6 +292,7 @@ config GPIO_PXA
config GPIO_RCAR
tristate "Renesas R-Car GPIO"
depends on ARM && (ARCH_SHMOBILE || COMPILE_TEST)
+ select GPIOLIB_IRQCHIP
help
Say yes here to support GPIO on Renesas R-Car SoCs.
@@ -365,9 +373,17 @@ config GPIO_XGENE
the generic flash controller's address and data pins. Say yes
here to enable the GFC GPIO functionality.
+config GPIO_XGENE_SB
+ tristate "APM X-Gene GPIO standby controller support"
+ depends on ARCH_XGENE && OF_GPIO
+ select GPIO_GENERIC
+ help
+ This driver supports the GPIO block within the APM X-Gene
+ Standby Domain. Say yes here to enable the GPIO functionality.
+
config GPIO_XILINX
- bool "Xilinx GPIO support"
- depends on PPC_OF || MICROBLAZE || ARCH_ZYNQ
+ tristate "Xilinx GPIO support"
+ depends on OF_GPIO && (PPC || MICROBLAZE || ARCH_ZYNQ || X86)
help
Say yes here to support the Xilinx FPGA GPIO device
@@ -394,25 +410,32 @@ config GPIO_VR41XX
Say yes here to support the NEC VR4100 series General-purpose I/O Uint
config GPIO_SCH
- tristate "Intel SCH/TunnelCreek/Centerton GPIO"
+ tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO"
depends on PCI && X86
select MFD_CORE
select LPC_SCH
help
Say yes here to support GPIO interface on Intel Poulsbo SCH,
- Intel Tunnel Creek processor or Intel Centerton processor.
+ Intel Tunnel Creek processor, Intel Centerton processor or
+ Intel Quark X1000 SoC.
+
The Intel SCH contains a total of 14 GPIO pins. Ten GPIOs are
powered by the core power rail and are turned off during sleep
modes (S3 and higher). The remaining four GPIOs are powered by
the Intel SCH suspend power supply. These GPIOs remain
active during S3. The suspend powered GPIOs can be used to wake the
system from the Suspend-to-RAM state.
+
The Intel Tunnel Creek processor has 5 GPIOs powered by the
core power rail and 9 from suspend power supply.
+
The Intel Centerton processor has a total of 30 GPIO pins.
Twenty-one are powered by the core power rail and 9 from the
suspend power supply.
+ The Intel Quark X1000 SoC has 2 GPIOs powered by the core
+ power well and 6 from the suspend power well.
+
config GPIO_ICH
tristate "Intel ICH GPIO"
depends on PCI && X86
@@ -450,6 +473,7 @@ config GPIO_VX855
config GPIO_GE_FPGA
bool "GE FPGA based GPIO"
depends on GE_FPGA
+ select GPIO_GENERIC
help
Support for common GPIO functionality provided on some GE Single Board
Computers.
@@ -519,6 +543,7 @@ config GPIO_MAX7300
config GPIO_MAX732X
tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
depends on I2C
+ select IRQ_DOMAIN
help
Say yes here to support the MAX7319, MAX7320-7327 series of I2C
Port Expanders. Each IO port on these chips has a fixed role of
@@ -613,6 +638,7 @@ config GPIO_RC5T583
config GPIO_SX150X
bool "Semtech SX150x I2C GPIO expander"
depends on I2C=y
+ select GPIOLIB_IRQCHIP
default n
help
Say yes here to provide support for Semtech SX150-series I2C
@@ -624,6 +650,7 @@ config GPIO_SX150X
config GPIO_STMPE
bool "STMPE GPIOs"
depends on MFD_STMPE
+ depends on OF_GPIO
select GPIOLIB_IRQCHIP
help
This enables support for the GPIOs found on the STMPE I/O