summaryrefslogtreecommitdiff
path: root/drivers/gpio/pcf857x.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/pcf857x.c')
-rw-r--r--drivers/gpio/pcf857x.c330
1 files changed, 330 insertions, 0 deletions
diff --git a/drivers/gpio/pcf857x.c b/drivers/gpio/pcf857x.c
new file mode 100644
index 000000000000..c6b3b5378384
--- /dev/null
+++ b/drivers/gpio/pcf857x.c
@@ -0,0 +1,330 @@
+/*
+ * pcf857x - driver for pcf857x, pca857x, and pca967x I2C GPIO expanders
+ *
+ * Copyright (C) 2007 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+
+#include <asm/gpio.h>
+
+
+/*
+ * The pcf857x, pca857x, and pca967x chips only expose one read and one
+ * write register. Writing a "one" bit (to match the reset state) lets
+ * that pin be used as an input; it's not an open-drain model, but acts
+ * a bit like one. This is described as "quasi-bidirectional"; read the
+ * chip documentation for details.
+ *
+ * Many other I2C GPIO expander chips (like the pca953x models) have
+ * more complex register models and more conventional circuitry using
+ * push/pull drivers. They often use the same 0x20..0x27 addresses as
+ * pcf857x parts, making the "legacy" I2C driver model problematic.
+ */
+struct pcf857x {
+ struct gpio_chip chip;
+ struct i2c_client *client;
+ unsigned out; /* software latch */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Talk to 8-bit I/O expander */
+
+static int pcf857x_input8(struct gpio_chip *chip, unsigned offset)
+{
+ struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
+
+ gpio->out |= (1 << offset);
+ return i2c_smbus_write_byte(gpio->client, gpio->out);
+}
+
+static int pcf857x_get8(struct gpio_chip *chip, unsigned offset)
+{
+ struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
+ s32 value;
+
+ value = i2c_smbus_read_byte(gpio->client);
+ return (value < 0) ? 0 : (value & (1 << offset));
+}
+
+static int pcf857x_output8(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
+ unsigned bit = 1 << offset;
+
+ if (value)
+ gpio->out |= bit;
+ else
+ gpio->out &= ~bit;
+ return i2c_smbus_write_byte(gpio->client, gpio->out);
+}
+
+static void pcf857x_set8(struct gpio_chip *chip, unsigned offset, int value)
+{
+ pcf857x_output8(chip, offset, value);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* Talk to 16-bit I/O expander */
+
+static int i2c_write_le16(struct i2c_client *client, u16 word)
+{
+ u8 buf[2] = { word & 0xff, word >> 8, };
+ int status;
+
+ status = i2c_master_send(client, buf, 2);
+ return (status < 0) ? status : 0;
+}
+
+static int i2c_read_le16(struct i2c_client *client)
+{
+ u8 buf[2];
+ int status;
+
+ status = i2c_master_recv(client, buf, 2);
+ if (status < 0)
+ return status;
+ return (buf[1] << 8) | buf[0];
+}
+
+static int pcf857x_input16(struct gpio_chip *chip, unsigned offset)
+{
+ struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
+
+ gpio->out |= (1 << offset);
+ return i2c_write_le16(gpio->client, gpio->out);
+}
+
+static int pcf857x_get16(struct gpio_chip *chip, unsigned offset)
+{
+ struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
+ int value;
+
+ value = i2c_read_le16(gpio->client);
+ return (value < 0) ? 0 : (value & (1 << offset));
+}
+
+static int pcf857x_output16(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct pcf857x *gpio = container_of(chip, struct pcf857x, chip);
+ unsigned bit = 1 << offset;
+
+ if (value)
+ gpio->out |= bit;
+ else
+ gpio->out &= ~bit;
+ return i2c_write_le16(gpio->client, gpio->out);
+}
+
+static void pcf857x_set16(struct gpio_chip *chip, unsigned offset, int value)
+{
+ pcf857x_output16(chip, offset, value);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int pcf857x_probe(struct i2c_client *client)
+{
+ struct pcf857x_platform_data *pdata;
+ struct pcf857x *gpio;
+ int status;
+
+ pdata = client->dev.platform_data;
+ if (!pdata)
+ return -ENODEV;
+
+ /* Allocate, initialize, and register this gpio_chip. */
+ gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
+ if (!gpio)
+ return -ENOMEM;
+
+ gpio->chip.base = pdata->gpio_base;
+ gpio->chip.can_sleep = 1;
+
+ /* NOTE: the OnSemi jlc1562b is also largely compatible with
+ * these parts, notably for output. It has a low-resolution
+ * DAC instead of pin change IRQs; and its inputs can be the
+ * result of comparators.
+ */
+
+ /* 8574 addresses are 0x20..0x27; 8574a uses 0x38..0x3f;
+ * 9670, 9672, 9764, and 9764a use quite a variety.
+ *
+ * NOTE: we don't distinguish here between *4 and *4a parts.
+ */
+ if (strcmp(client->name, "pcf8574") == 0
+ || strcmp(client->name, "pca8574") == 0
+ || strcmp(client->name, "pca9670") == 0
+ || strcmp(client->name, "pca9672") == 0
+ || strcmp(client->name, "pca9674") == 0
+ ) {
+ gpio->chip.ngpio = 8;
+ gpio->chip.direction_input = pcf857x_input8;
+ gpio->chip.get = pcf857x_get8;
+ gpio->chip.direction_output = pcf857x_output8;
+ gpio->chip.set = pcf857x_set8;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE))
+ status = -EIO;
+
+ /* fail if there's no chip present */
+ else
+ status = i2c_smbus_read_byte(client);
+
+ /* '75/'75c addresses are 0x20..0x27, just like the '74;
+ * the '75c doesn't have a current source pulling high.
+ * 9671, 9673, and 9765 use quite a variety of addresses.
+ *
+ * NOTE: we don't distinguish here between '75 and '75c parts.
+ */
+ } else if (strcmp(client->name, "pcf8575") == 0
+ || strcmp(client->name, "pca8575") == 0
+ || strcmp(client->name, "pca9671") == 0
+ || strcmp(client->name, "pca9673") == 0
+ || strcmp(client->name, "pca9675") == 0
+ ) {
+ gpio->chip.ngpio = 16;
+ gpio->chip.direction_input = pcf857x_input16;
+ gpio->chip.get = pcf857x_get16;
+ gpio->chip.direction_output = pcf857x_output16;
+ gpio->chip.set = pcf857x_set16;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+ status = -EIO;
+
+ /* fail if there's no chip present */
+ else
+ status = i2c_read_le16(client);
+
+ } else
+ status = -ENODEV;
+
+ if (status < 0)
+ goto fail;
+
+ gpio->chip.label = client->name;
+
+ gpio->client = client;
+ i2c_set_clientdata(client, gpio);
+
+ /* NOTE: these chips have strange "quasi-bidirectional" I/O pins.
+ * We can't actually know whether a pin is configured (a) as output
+ * and driving the signal low, or (b) as input and reporting a low
+ * value ... without knowing the last value written since the chip
+ * came out of reset (if any). We can't read the latched output.
+ *
+ * In short, the only reliable solution for setting up pin direction
+ * is to do it explicitly. The setup() method can do that, but it
+ * may cause transient glitching since it can't know the last value
+ * written (some pins may need to be driven low).
+ *
+ * Using pdata->n_latch avoids that trouble. When left initialized
+ * to zero, our software copy of the "latch" then matches the chip's
+ * all-ones reset state. Otherwise it flags pins to be driven low.
+ */
+ gpio->out = ~pdata->n_latch;
+
+ status = gpiochip_add(&gpio->chip);
+ if (status < 0)
+ goto fail;
+
+ /* NOTE: these chips can issue "some pin-changed" IRQs, which we
+ * don't yet even try to use. Among other issues, the relevant
+ * genirq state isn't available to modular drivers; and most irq
+ * methods can't be called from sleeping contexts.
+ */
+
+ dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
+ gpio->chip.base,
+ gpio->chip.base + gpio->chip.ngpio - 1,
+ client->name,
+ client->irq ? " (irq ignored)" : "");
+
+ /* Let platform code set up the GPIOs and their users.
+ * Now is the first time anyone could use them.
+ */
+ if (pdata->setup) {
+ status = pdata->setup(client,
+ gpio->chip.base, gpio->chip.ngpio,
+ pdata->context);
+ if (status < 0)
+ dev_warn(&client->dev, "setup --> %d\n", status);
+ }
+
+ return 0;
+
+fail:
+ dev_dbg(&client->dev, "probe error %d for '%s'\n",
+ status, client->name);
+ kfree(gpio);
+ return status;
+}
+
+static int pcf857x_remove(struct i2c_client *client)
+{
+ struct pcf857x_platform_data *pdata = client->dev.platform_data;
+ struct pcf857x *gpio = i2c_get_clientdata(client);
+ int status = 0;
+
+ if (pdata->teardown) {
+ status = pdata->teardown(client,
+ gpio->chip.base, gpio->chip.ngpio,
+ pdata->context);
+ if (status < 0) {
+ dev_err(&client->dev, "%s --> %d\n",
+ "teardown", status);
+ return status;
+ }
+ }
+
+ status = gpiochip_remove(&gpio->chip);
+ if (status == 0)
+ kfree(gpio);
+ else
+ dev_err(&client->dev, "%s --> %d\n", "remove", status);
+ return status;
+}
+
+static struct i2c_driver pcf857x_driver = {
+ .driver = {
+ .name = "pcf857x",
+ .owner = THIS_MODULE,
+ },
+ .probe = pcf857x_probe,
+ .remove = pcf857x_remove,
+};
+
+static int __init pcf857x_init(void)
+{
+ return i2c_add_driver(&pcf857x_driver);
+}
+module_init(pcf857x_init);
+
+static void __exit pcf857x_exit(void)
+{
+ i2c_del_driver(&pcf857x_driver);
+}
+module_exit(pcf857x_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");