summaryrefslogtreecommitdiff
path: root/drivers/gpio
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio')
-rw-r--r--drivers/gpio/Kconfig2
-rw-r--r--drivers/gpio/gpio-adnp.c6
-rw-r--r--drivers/gpio/gpio-grgpio.c10
-rw-r--r--drivers/gpio/gpio-max77620.c6
-rw-r--r--drivers/gpio/gpio-mpc8xxx.c4
-rw-r--r--drivers/gpio/gpio-omap.c52
-rw-r--r--drivers/gpio/gpio-pxa.c6
-rw-r--r--drivers/gpio/gpio-syscon.c2
-rw-r--r--drivers/gpio/gpiolib-of.c8
-rw-r--r--drivers/gpio/gpiolib.c82
10 files changed, 108 insertions, 70 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 62b268f9b485..602eff92a477 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -683,6 +683,7 @@ config GPIO_ADP5588
config GPIO_ADP5588_IRQ
bool "Interrupt controller support for ADP5588"
depends on GPIO_ADP5588=y
+ select GPIOLIB_IRQCHIP
help
Say yes here to enable the adp5588 to be used as an interrupt
controller. It requires the driver to be built in the kernel.
@@ -932,6 +933,7 @@ config GPIO_LP873X
config GPIO_MAX77620
tristate "GPIO support for PMIC MAX77620 and MAX20024"
depends on MFD_MAX77620
+ select GPIOLIB_IRQCHIP
help
GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor.
MAX77620 PMIC has 8 pins that can be configured as GPIOs. The
diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
index 8ff7b0d3eac6..3b68c03a281d 100644
--- a/drivers/gpio/gpio-adnp.c
+++ b/drivers/gpio/gpio-adnp.c
@@ -132,8 +132,10 @@ static int adnp_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
if (err < 0)
goto out;
- if (err & BIT(pos))
- err = -EACCES;
+ if (value & BIT(pos)) {
+ err = -EPERM;
+ goto out;
+ }
err = 0;
diff --git a/drivers/gpio/gpio-grgpio.c b/drivers/gpio/gpio-grgpio.c
index 7847dd34f86f..036a78b70427 100644
--- a/drivers/gpio/gpio-grgpio.c
+++ b/drivers/gpio/gpio-grgpio.c
@@ -259,17 +259,16 @@ static int grgpio_irq_map(struct irq_domain *d, unsigned int irq,
lirq->irq = irq;
uirq = &priv->uirqs[lirq->index];
if (uirq->refcnt == 0) {
+ spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
ret = request_irq(uirq->uirq, grgpio_irq_handler, 0,
dev_name(priv->dev), priv);
if (ret) {
dev_err(priv->dev,
"Could not request underlying irq %d\n",
uirq->uirq);
-
- spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
-
return ret;
}
+ spin_lock_irqsave(&priv->gc.bgpio_lock, flags);
}
uirq->refcnt++;
@@ -315,8 +314,11 @@ static void grgpio_irq_unmap(struct irq_domain *d, unsigned int irq)
if (index >= 0) {
uirq = &priv->uirqs[lirq->index];
uirq->refcnt--;
- if (uirq->refcnt == 0)
+ if (uirq->refcnt == 0) {
+ spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
free_irq(uirq->uirq, priv);
+ return;
+ }
}
spin_unlock_irqrestore(&priv->gc.bgpio_lock, flags);
diff --git a/drivers/gpio/gpio-max77620.c b/drivers/gpio/gpio-max77620.c
index b46b436cb97f..52cac7c600ee 100644
--- a/drivers/gpio/gpio-max77620.c
+++ b/drivers/gpio/gpio-max77620.c
@@ -167,13 +167,13 @@ static int max77620_gpio_set_debounce(struct gpio_chip *gc,
case 0:
val = MAX77620_CNFG_GPIO_DBNC_None;
break;
- case 1 ... 8:
+ case 1 ... 8000:
val = MAX77620_CNFG_GPIO_DBNC_8ms;
break;
- case 9 ... 16:
+ case 8001 ... 16000:
val = MAX77620_CNFG_GPIO_DBNC_16ms;
break;
- case 17 ... 32:
+ case 16001 ... 32000:
val = MAX77620_CNFG_GPIO_DBNC_32ms;
break;
default:
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 793518a30afe..b67f61d31e25 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -306,6 +306,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
return -ENOMEM;
gc = &mpc8xxx_gc->gc;
+ gc->parent = &pdev->dev;
if (of_property_read_bool(np, "little-endian")) {
ret = bgpio_init(gc, &pdev->dev, 4,
@@ -337,7 +338,8 @@ static int mpc8xxx_probe(struct platform_device *pdev)
* It's assumed that only a single type of gpio controller is available
* on the current machine, so overwriting global data is fine.
*/
- mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
+ if (devtype->irq_set_type)
+ mpc8xxx_irq_chip.irq_set_type = devtype->irq_set_type;
if (devtype->gpio_dir_out)
gc->direction_output = devtype->gpio_dir_out;
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 6f9c9ac6ee70..fc841ce24db7 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -296,6 +296,22 @@ static void omap_clear_gpio_debounce(struct gpio_bank *bank, unsigned offset)
}
}
+/*
+ * Off mode wake-up capable GPIOs in bank(s) that are in the wakeup domain.
+ * See TRM section for GPIO for "Wake-Up Generation" for the list of GPIOs
+ * in wakeup domain. If bank->non_wakeup_gpios is not configured, assume none
+ * are capable waking up the system from off mode.
+ */
+static bool omap_gpio_is_off_wakeup_capable(struct gpio_bank *bank, u32 gpio_mask)
+{
+ u32 no_wake = bank->non_wakeup_gpios;
+
+ if (no_wake)
+ return !!(~no_wake & gpio_mask);
+
+ return false;
+}
+
static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
unsigned trigger)
{
@@ -327,13 +343,7 @@ static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
}
/* This part needs to be executed always for OMAP{34xx, 44xx} */
- if (!bank->regs->irqctrl) {
- /* On omap24xx proceed only when valid GPIO bit is set */
- if (bank->non_wakeup_gpios) {
- if (!(bank->non_wakeup_gpios & gpio_bit))
- goto exit;
- }
-
+ if (!bank->regs->irqctrl && !omap_gpio_is_off_wakeup_capable(bank, gpio)) {
/*
* Log the edge gpio and manually trigger the IRQ
* after resume if the input level changes
@@ -346,7 +356,6 @@ static inline void omap_set_gpio_trigger(struct gpio_bank *bank, int gpio,
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
}
-exit:
bank->level_mask =
readl_relaxed(bank->base + bank->regs->leveldetect0) |
readl_relaxed(bank->base + bank->regs->leveldetect1);
@@ -777,9 +786,9 @@ static void omap_gpio_irq_shutdown(struct irq_data *d)
raw_spin_lock_irqsave(&bank->lock, flags);
bank->irq_usage &= ~(BIT(offset));
- omap_set_gpio_irqenable(bank, offset, 0);
- omap_clear_gpio_irqstatus(bank, offset);
omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+ omap_clear_gpio_irqstatus(bank, offset);
+ omap_set_gpio_irqenable(bank, offset, 0);
if (!LINE_USED(bank->mod_usage, offset))
omap_clear_gpio_debounce(bank, offset);
omap_disable_gpio_module(bank, offset);
@@ -821,8 +830,8 @@ static void omap_gpio_mask_irq(struct irq_data *d)
unsigned long flags;
raw_spin_lock_irqsave(&bank->lock, flags);
- omap_set_gpio_irqenable(bank, offset, 0);
omap_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
+ omap_set_gpio_irqenable(bank, offset, 0);
raw_spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -834,17 +843,20 @@ static void omap_gpio_unmask_irq(struct irq_data *d)
unsigned long flags;
raw_spin_lock_irqsave(&bank->lock, flags);
- if (trigger)
- omap_set_gpio_triggering(bank, offset, trigger);
+ omap_set_gpio_irqenable(bank, offset, 1);
- /* For level-triggered GPIOs, the clearing must be done after
- * the HW source is cleared, thus after the handler has run */
- if (bank->level_mask & BIT(offset)) {
- omap_set_gpio_irqenable(bank, offset, 0);
+ /*
+ * For level-triggered GPIOs, clearing must be done after the source
+ * is cleared, thus after the handler has run. OMAP4 needs this done
+ * after enabing the interrupt to clear the wakeup status.
+ */
+ if (bank->regs->leveldetect0 && bank->regs->wkup_en &&
+ trigger & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
omap_clear_gpio_irqstatus(bank, offset);
- }
- omap_set_gpio_irqenable(bank, offset, 1);
+ if (trigger)
+ omap_set_gpio_triggering(bank, offset, trigger);
+
raw_spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -1574,6 +1586,8 @@ static struct omap_gpio_reg_offs omap4_gpio_regs = {
.clr_dataout = OMAP4_GPIO_CLEARDATAOUT,
.irqstatus = OMAP4_GPIO_IRQSTATUS0,
.irqstatus2 = OMAP4_GPIO_IRQSTATUS1,
+ .irqstatus_raw0 = OMAP4_GPIO_IRQSTATUSRAW0,
+ .irqstatus_raw1 = OMAP4_GPIO_IRQSTATUSRAW1,
.irqenable = OMAP4_GPIO_IRQSTATUSSET0,
.irqenable2 = OMAP4_GPIO_IRQSTATUSSET1,
.set_irqenable = OMAP4_GPIO_IRQSTATUSSET0,
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index 7a6305884f97..32d22bdf7164 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -774,6 +774,9 @@ static int pxa_gpio_suspend(void)
struct pxa_gpio_bank *c;
int gpio;
+ if (!pchip)
+ return 0;
+
for_each_gpio_bank(gpio, c, pchip) {
c->saved_gplr = readl_relaxed(c->regbase + GPLR_OFFSET);
c->saved_gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
@@ -792,6 +795,9 @@ static void pxa_gpio_resume(void)
struct pxa_gpio_bank *c;
int gpio;
+ if (!pchip)
+ return;
+
for_each_gpio_bank(gpio, c, pchip) {
/* restore level with set/clear */
writel_relaxed(c->saved_gplr, c->regbase + GPSR_OFFSET);
diff --git a/drivers/gpio/gpio-syscon.c b/drivers/gpio/gpio-syscon.c
index 537cec7583fc..cf88a0bfe99e 100644
--- a/drivers/gpio/gpio-syscon.c
+++ b/drivers/gpio/gpio-syscon.c
@@ -122,7 +122,7 @@ static int syscon_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int val)
BIT(offs % SYSCON_REG_BITS));
}
- priv->data->set(chip, offset, val);
+ chip->set(chip, offset, val);
return 0;
}
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index aac84329c759..b863386be911 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -531,7 +531,13 @@ int of_gpiochip_add(struct gpio_chip *chip)
of_node_get(chip->of_node);
- return of_gpiochip_scan_gpios(chip);
+ status = of_gpiochip_scan_gpios(chip);
+ if (status) {
+ of_node_put(chip->of_node);
+ gpiochip_remove_pin_ranges(chip);
+ }
+
+ return status;
}
void of_gpiochip_remove(struct gpio_chip *chip)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9e2fe12c2858..73d02f6089d5 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -188,6 +188,14 @@ int gpiod_get_direction(struct gpio_desc *desc)
chip = gpiod_to_chip(desc);
offset = gpio_chip_hwgpio(desc);
+ /*
+ * Open drain emulation using input mode may incorrectly report
+ * input here, fix that up.
+ */
+ if (test_bit(FLAG_OPEN_DRAIN, &desc->flags) &&
+ test_bit(FLAG_IS_OUT, &desc->flags))
+ return 0;
+
if (!chip->get_direction)
return status;
@@ -426,12 +434,23 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
struct linehandle_state *lh;
struct file *file;
int fd, i, count = 0, ret;
+ u32 lflags;
if (copy_from_user(&handlereq, ip, sizeof(handlereq)))
return -EFAULT;
if ((handlereq.lines == 0) || (handlereq.lines > GPIOHANDLES_MAX))
return -EINVAL;
+ lflags = handlereq.flags;
+
+ /*
+ * Do not allow both INPUT & OUTPUT flags to be set as they are
+ * contradictory.
+ */
+ if ((lflags & GPIOHANDLE_REQUEST_INPUT) &&
+ (lflags & GPIOHANDLE_REQUEST_OUTPUT))
+ return -EINVAL;
+
lh = kzalloc(sizeof(*lh), GFP_KERNEL);
if (!lh)
return -ENOMEM;
@@ -452,7 +471,6 @@ static int linehandle_create(struct gpio_device *gdev, void __user *ip)
/* Request each GPIO */
for (i = 0; i < handlereq.lines; i++) {
u32 offset = handlereq.lineoffsets[i];
- u32 lflags = handlereq.flags;
struct gpio_desc *desc;
if (offset >= gdev->ngpio) {
@@ -787,7 +805,9 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
}
/* This is just wrong: we don't look for events on output lines */
- if (lflags & GPIOHANDLE_REQUEST_OUTPUT) {
+ if ((lflags & GPIOHANDLE_REQUEST_OUTPUT) ||
+ (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN) ||
+ (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)) {
ret = -EINVAL;
goto out_free_label;
}
@@ -801,10 +821,6 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
if (lflags & GPIOHANDLE_REQUEST_ACTIVE_LOW)
set_bit(FLAG_ACTIVE_LOW, &desc->flags);
- if (lflags & GPIOHANDLE_REQUEST_OPEN_DRAIN)
- set_bit(FLAG_OPEN_DRAIN, &desc->flags);
- if (lflags & GPIOHANDLE_REQUEST_OPEN_SOURCE)
- set_bit(FLAG_OPEN_SOURCE, &desc->flags);
ret = gpiod_direction_input(desc);
if (ret)
@@ -817,9 +833,11 @@ static int lineevent_create(struct gpio_device *gdev, void __user *ip)
}
if (eflags & GPIOEVENT_REQUEST_RISING_EDGE)
- irqflags |= IRQF_TRIGGER_RISING;
+ irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+ IRQF_TRIGGER_FALLING : IRQF_TRIGGER_RISING;
if (eflags & GPIOEVENT_REQUEST_FALLING_EDGE)
- irqflags |= IRQF_TRIGGER_FALLING;
+ irqflags |= test_bit(FLAG_ACTIVE_LOW, &desc->flags) ?
+ IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
irqflags |= IRQF_ONESHOT;
irqflags |= IRQF_SHARED;
@@ -951,9 +969,11 @@ static long gpio_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
lineinfo.flags |= GPIOLINE_FLAG_ACTIVE_LOW;
if (test_bit(FLAG_OPEN_DRAIN, &desc->flags))
- lineinfo.flags |= GPIOLINE_FLAG_OPEN_DRAIN;
+ lineinfo.flags |= (GPIOLINE_FLAG_OPEN_DRAIN |
+ GPIOLINE_FLAG_IS_OUT);
if (test_bit(FLAG_OPEN_SOURCE, &desc->flags))
- lineinfo.flags |= GPIOLINE_FLAG_OPEN_SOURCE;
+ lineinfo.flags |= (GPIOLINE_FLAG_OPEN_SOURCE |
+ GPIOLINE_FLAG_IS_OUT);
if (copy_to_user(ip, &lineinfo, sizeof(lineinfo)))
return -EFAULT;
@@ -1212,31 +1232,14 @@ int gpiochip_add_data(struct gpio_chip *chip, void *data)
struct gpio_desc *desc = &gdev->descs[i];
desc->gdev = gdev;
- /*
- * REVISIT: most hardware initializes GPIOs as inputs
- * (often with pullups enabled) so power usage is
- * minimized. Linux code should set the gpio direction
- * first thing; but until it does, and in case
- * chip->get_direction is not set, we may expose the
- * wrong direction in sysfs.
- */
-
- if (chip->get_direction) {
- /*
- * If we have .get_direction, set up the initial
- * direction flag from the hardware.
- */
- int dir = chip->get_direction(chip, i);
- if (!dir)
- set_bit(FLAG_IS_OUT, &desc->flags);
- } else if (!chip->direction_input) {
- /*
- * If the chip lacks the .direction_input callback
- * we logically assume all lines are outputs.
- */
- set_bit(FLAG_IS_OUT, &desc->flags);
- }
+ /* REVISIT: most hardware initializes GPIOs as inputs (often
+ * with pullups enabled) so power usage is minimized. Linux
+ * code should set the gpio direction first thing; but until
+ * it does, and in case chip->get_direction is not set, we may
+ * expose the wrong direction in sysfs.
+ */
+ desc->flags = !chip->direction_input ? (1 << FLAG_IS_OUT) : 0;
}
#ifdef CONFIG_PINCTRL
@@ -2411,7 +2414,7 @@ static int _gpiod_get_raw_value(const struct gpio_desc *desc)
int gpiod_get_raw_value(const struct gpio_desc *desc)
{
VALIDATE_DESC(desc);
- /* Should be using gpio_get_value_cansleep() */
+ /* Should be using gpiod_get_raw_value_cansleep() */
WARN_ON(desc->gdev->chip->can_sleep);
return _gpiod_get_raw_value(desc);
}
@@ -2432,7 +2435,7 @@ int gpiod_get_value(const struct gpio_desc *desc)
int value;
VALIDATE_DESC(desc);
- /* Should be using gpio_get_value_cansleep() */
+ /* Should be using gpiod_get_value_cansleep() */
WARN_ON(desc->gdev->chip->can_sleep);
value = _gpiod_get_raw_value(desc);
@@ -2608,7 +2611,7 @@ void gpiod_set_array_value_complex(bool raw, bool can_sleep,
void gpiod_set_raw_value(struct gpio_desc *desc, int value)
{
VALIDATE_DESC_VOID(desc);
- /* Should be using gpiod_set_value_cansleep() */
+ /* Should be using gpiod_set_raw_value_cansleep() */
WARN_ON(desc->gdev->chip->can_sleep);
_gpiod_set_raw_value(desc, value);
}
@@ -3029,8 +3032,9 @@ static struct gpio_desc *gpiod_find(struct device *dev, const char *con_id,
if (chip->ngpio <= p->chip_hwnum) {
dev_err(dev,
- "requested GPIO %d is out of range [0..%d] for chip %s\n",
- idx, chip->ngpio, chip->label);
+ "requested GPIO %u (%u) is out of range [0..%u] for chip %s\n",
+ idx, p->chip_hwnum, chip->ngpio - 1,
+ chip->label);
return ERR_PTR(-EINVAL);
}
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-13 13:58:02 +0000