diff options
Diffstat (limited to 'drivers/gpu/drm/ast/ast_main.c')
-rw-r--r-- | drivers/gpu/drm/ast/ast_main.c | 171 |
1 files changed, 119 insertions, 52 deletions
diff --git a/drivers/gpu/drm/ast/ast_main.c b/drivers/gpu/drm/ast/ast_main.c index f75c6421db62..fb9976254224 100644 --- a/drivers/gpu/drm/ast/ast_main.c +++ b/drivers/gpu/drm/ast/ast_main.c @@ -62,13 +62,84 @@ uint8_t ast_get_index_reg_mask(struct ast_private *ast, return ret; } +static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev) +{ + struct device_node *np = dev->pdev->dev.of_node; + struct ast_private *ast = dev->dev_private; + uint32_t data, jregd0, jregd1; + + /* Defaults */ + ast->config_mode = ast_use_defaults; + *scu_rev = 0xffffffff; + + /* Check if we have device-tree properties */ + if (np && !of_property_read_u32(np, "aspeed,scu-revision-id", + scu_rev)) { + /* We do, disable P2A access */ + ast->config_mode = ast_use_dt; + DRM_INFO("Using device-tree for configuration\n"); + return; + } + + /* Not all families have a P2A bridge */ + if (dev->pdev->device != PCI_CHIP_AST2000) + return; + + /* + * The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge + * is disabled. We force using P2A if VGA only mode bit + * is set D[7] + */ + jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff); + if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) { + /* Double check it's actually working */ + data = ast_read32(ast, 0xf004); + if (data != 0xFFFFFFFF) { + /* P2A works, grab silicon revision */ + ast->config_mode = ast_use_p2a; + + DRM_INFO("Using P2A bridge for configuration\n"); + + /* Read SCU7c (silicon revision register) */ + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + *scu_rev = ast_read32(ast, 0x1207c); + return; + } + } + + /* We have a P2A bridge but it's disabled */ + DRM_INFO("P2A bridge disabled, using default configuration\n"); +} static int ast_detect_chip(struct drm_device *dev, bool *need_post) { struct ast_private *ast = dev->dev_private; - uint32_t data, jreg; + uint32_t jreg, scu_rev; + + /* + * If VGA isn't enabled, we need to enable now or subsequent + * access to the scratch registers will fail. We also inform + * our caller that it needs to POST the chip + * (Assumption: VGA not enabled -> need to POST) + */ + if (!ast_is_vga_enabled(dev)) { + ast_enable_vga(dev); + DRM_INFO("VGA not enabled on entry, requesting chip POST\n"); + *need_post = true; + } else + *need_post = false; + + + /* Enable extended register access */ + ast_enable_mmio(dev); ast_open_key(ast); + /* Find out whether P2A works or whether to use device-tree */ + ast_detect_config_mode(dev, &scu_rev); + + /* Identify chipset */ if (dev->pdev->device == PCI_CHIP_AST1180) { ast->chip = AST1100; DRM_INFO("AST 1180 detected\n"); @@ -80,12 +151,7 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post) ast->chip = AST2300; DRM_INFO("AST 2300 detected\n"); } else if (dev->pdev->revision >= 0x10) { - uint32_t data; - ast_write32(ast, 0xf004, 0x1e6e0000); - ast_write32(ast, 0xf000, 0x1); - - data = ast_read32(ast, 0x1207c); - switch (data & 0x0300) { + switch (scu_rev & 0x0300) { case 0x0200: ast->chip = AST1100; DRM_INFO("AST 1100 detected\n"); @@ -110,20 +176,6 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post) } } - /* - * If VGA isn't enabled, we need to enable now or subsequent - * access to the scratch registers will fail. We also inform - * our caller that it needs to POST the chip - * (Assumption: VGA not enabled -> need to POST) - */ - if (!ast_is_vga_enabled(dev)) { - ast_enable_vga(dev); - ast_enable_mmio(dev); - DRM_INFO("VGA not enabled on entry, requesting chip POST\n"); - *need_post = true; - } else - *need_post = false; - /* Check if we support wide screen */ switch (ast->chip) { case AST1180: @@ -140,14 +192,11 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post) ast->support_wide_screen = true; else { ast->support_wide_screen = false; - /* Read SCU7c (silicon revision register) */ - ast_write32(ast, 0xf004, 0x1e6e0000); - ast_write32(ast, 0xf000, 0x1); - data = ast_read32(ast, 0x1207c); - data &= 0x300; - if (ast->chip == AST2300 && data == 0x0) /* ast1300 */ + if (ast->chip == AST2300 && + (scu_rev & 0x300) == 0x0) /* ast1300 */ ast->support_wide_screen = true; - if (ast->chip == AST2400 && data == 0x100) /* ast1400 */ + if (ast->chip == AST2400 && + (scu_rev & 0x300) == 0x100) /* ast1400 */ ast->support_wide_screen = true; } break; @@ -212,29 +261,49 @@ static int ast_detect_chip(struct drm_device *dev, bool *need_post) static int ast_get_dram_info(struct drm_device *dev) { + struct device_node *np = dev->pdev->dev.of_node; struct ast_private *ast = dev->dev_private; - uint32_t data, data2; - uint32_t denum, num, div, ref_pll; - - ast_write32(ast, 0xf004, 0x1e6e0000); - ast_write32(ast, 0xf000, 0x1); - - - ast_write32(ast, 0x10000, 0xfc600309); + uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap; + uint32_t denum, num, div, ref_pll, dsel; - do { - if (pci_channel_offline(dev->pdev)) - return -EIO; - } while (ast_read32(ast, 0x10000) != 0x01); - data = ast_read32(ast, 0x10004); + switch (ast->config_mode) { + case ast_use_dt: + /* + * If some properties are missing, use reasonable + * defaults for AST2400 + */ + if (of_property_read_u32(np, "aspeed,mcr-configuration", + &mcr_cfg)) + mcr_cfg = 0x00000577; + if (of_property_read_u32(np, "aspeed,mcr-scu-mpll", + &mcr_scu_mpll)) + mcr_scu_mpll = 0x000050C0; + if (of_property_read_u32(np, "aspeed,mcr-scu-strap", + &mcr_scu_strap)) + mcr_scu_strap = 0; + break; + case ast_use_p2a: + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + mcr_cfg = ast_read32(ast, 0x10004); + mcr_scu_mpll = ast_read32(ast, 0x10120); + mcr_scu_strap = ast_read32(ast, 0x10170); + break; + case ast_use_defaults: + default: + ast->dram_bus_width = 16; + ast->dram_type = AST_DRAM_1Gx16; + ast->mclk = 396; + return 0; + } - if (data & 0x40) + if (mcr_cfg & 0x40) ast->dram_bus_width = 16; else ast->dram_bus_width = 32; if (ast->chip == AST2300 || ast->chip == AST2400) { - switch (data & 0x03) { + switch (mcr_cfg & 0x03) { case 0: ast->dram_type = AST_DRAM_512Mx16; break; @@ -250,13 +319,13 @@ static int ast_get_dram_info(struct drm_device *dev) break; } } else { - switch (data & 0x0c) { + switch (mcr_cfg & 0x0c) { case 0: case 4: ast->dram_type = AST_DRAM_512Mx16; break; case 8: - if (data & 0x40) + if (mcr_cfg & 0x40) ast->dram_type = AST_DRAM_1Gx16; else ast->dram_type = AST_DRAM_512Mx32; @@ -267,17 +336,15 @@ static int ast_get_dram_info(struct drm_device *dev) } } - data = ast_read32(ast, 0x10120); - data2 = ast_read32(ast, 0x10170); - if (data2 & 0x2000) + if (mcr_scu_strap & 0x2000) ref_pll = 14318; else ref_pll = 12000; - denum = data & 0x1f; - num = (data & 0x3fe0) >> 5; - data = (data & 0xc000) >> 14; - switch (data) { + denum = mcr_scu_mpll & 0x1f; + num = (mcr_scu_mpll & 0x3fe0) >> 5; + dsel = (mcr_scu_mpll & 0xc000) >> 14; + switch (dsel) { case 3: div = 0x4; break; |