1 files changed, 776 insertions, 0 deletions

diff --git a/drivers/gpu/drm/gma500/gma_display.c b/drivers/gpu/drm/gma500/gma_display.c
new file mode 100644
index 000000000000..24e8af3d22bf
--- /dev/null
+++ b/drivers/gpu/drm/gma500/gma_display.c
@@ -0,0 +1,776 @@
+/*
+ * Copyright © 2006-2011 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Authors:
+ *	Eric Anholt <eric@anholt.net>
+ *	Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
+ */
+
+#include <drm/drmP.h>
+#include "gma_display.h"
+#include "psb_intel_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_drv.h"
+#include "framebuffer.h"
+
+/**
+ * Returns whether any output on the specified pipe is of the specified type
+ */
+bool gma_pipe_has_type(struct drm_crtc *crtc, int type)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_mode_config *mode_config = &dev->mode_config;
+	struct drm_connector *l_entry;
+
+	list_for_each_entry(l_entry, &mode_config->connector_list, head) {
+		if (l_entry->encoder && l_entry->encoder->crtc == crtc) {
+			struct gma_encoder *gma_encoder =
+						gma_attached_encoder(l_entry);
+			if (gma_encoder->type == type)
+				return true;
+		}
+	}
+
+	return false;
+}
+
+void gma_wait_for_vblank(struct drm_device *dev)
+{
+	/* Wait for 20ms, i.e. one cycle at 50hz. */
+	mdelay(20);
+}
+
+int gma_pipe_set_base(struct drm_crtc *crtc, int x, int y,
+		      struct drm_framebuffer *old_fb)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+	struct psb_framebuffer *psbfb = to_psb_fb(crtc->fb);
+	int pipe = gma_crtc->pipe;
+	const struct psb_offset *map = &dev_priv->regmap[pipe];
+	unsigned long start, offset;
+	u32 dspcntr;
+	int ret = 0;
+
+	if (!gma_power_begin(dev, true))
+		return 0;
+
+	/* no fb bound */
+	if (!crtc->fb) {
+		dev_err(dev->dev, "No FB bound\n");
+		goto gma_pipe_cleaner;
+	}
+
+	/* We are displaying this buffer, make sure it is actually loaded
+	   into the GTT */
+	ret = psb_gtt_pin(psbfb->gtt);
+	if (ret < 0)
+		goto gma_pipe_set_base_exit;
+	start = psbfb->gtt->offset;
+	offset = y * crtc->fb->pitches[0] + x * (crtc->fb->bits_per_pixel / 8);
+
+	REG_WRITE(map->stride, crtc->fb->pitches[0]);
+
+	dspcntr = REG_READ(map->cntr);
+	dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
+
+	switch (crtc->fb->bits_per_pixel) {
+	case 8:
+		dspcntr |= DISPPLANE_8BPP;
+		break;
+	case 16:
+		if (crtc->fb->depth == 15)
+			dspcntr |= DISPPLANE_15_16BPP;
+		else
+			dspcntr |= DISPPLANE_16BPP;
+		break;
+	case 24:
+	case 32:
+		dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
+		break;
+	default:
+		dev_err(dev->dev, "Unknown color depth\n");
+		ret = -EINVAL;
+		goto gma_pipe_set_base_exit;
+	}
+	REG_WRITE(map->cntr, dspcntr);
+
+	dev_dbg(dev->dev,
+		"Writing base %08lX %08lX %d %d\n", start, offset, x, y);
+
+	/* FIXME: Investigate whether this really is the base for psb and why
+		  the linear offset is named base for the other chips. map->surf
+		  should be the base and map->linoff the offset for all chips */
+	if (IS_PSB(dev)) {
+		REG_WRITE(map->base, offset + start);
+		REG_READ(map->base);
+	} else {
+		REG_WRITE(map->base, offset);
+		REG_READ(map->base);
+		REG_WRITE(map->surf, start);
+		REG_READ(map->surf);
+	}
+
+gma_pipe_cleaner:
+	/* If there was a previous display we can now unpin it */
+	if (old_fb)
+		psb_gtt_unpin(to_psb_fb(old_fb)->gtt);
+
+gma_pipe_set_base_exit:
+	gma_power_end(dev);
+	return ret;
+}
+
+/* Loads the palette/gamma unit for the CRTC with the prepared values */
+void gma_crtc_load_lut(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+	const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
+	int palreg = map->palette;
+	int i;
+
+	/* The clocks have to be on to load the palette. */
+	if (!crtc->enabled)
+		return;
+
+	if (gma_power_begin(dev, false)) {
+		for (i = 0; i < 256; i++) {
+			REG_WRITE(palreg + 4 * i,
+				  ((gma_crtc->lut_r[i] +
+				  gma_crtc->lut_adj[i]) << 16) |
+				  ((gma_crtc->lut_g[i] +
+				  gma_crtc->lut_adj[i]) << 8) |
+				  (gma_crtc->lut_b[i] +
+				  gma_crtc->lut_adj[i]));
+		}
+		gma_power_end(dev);
+	} else {
+		for (i = 0; i < 256; i++) {
+			/* FIXME: Why pipe[0] and not pipe[..._crtc->pipe]? */
+			dev_priv->regs.pipe[0].palette[i] =
+				  ((gma_crtc->lut_r[i] +
+				  gma_crtc->lut_adj[i]) << 16) |
+				  ((gma_crtc->lut_g[i] +
+				  gma_crtc->lut_adj[i]) << 8) |
+				  (gma_crtc->lut_b[i] +
+				  gma_crtc->lut_adj[i]);
+		}
+
+	}
+}
+
+void gma_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green, u16 *blue,
+			u32 start, u32 size)
+{
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+	int i;
+	int end = (start + size > 256) ? 256 : start + size;
+
+	for (i = start; i < end; i++) {
+		gma_crtc->lut_r[i] = red[i] >> 8;
+		gma_crtc->lut_g[i] = green[i] >> 8;
+		gma_crtc->lut_b[i] = blue[i] >> 8;
+	}
+
+	gma_crtc_load_lut(crtc);
+}
+
+/**
+ * Sets the power management mode of the pipe and plane.
+ *
+ * This code should probably grow support for turning the cursor off and back
+ * on appropriately at the same time as we're turning the pipe off/on.
+ */
+void gma_crtc_dpms(struct drm_crtc *crtc, int mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+	int pipe = gma_crtc->pipe;
+	const struct psb_offset *map = &dev_priv->regmap[pipe];
+	u32 temp;
+
+	/* XXX: When our outputs are all unaware of DPMS modes other than off
+	 * and on, we should map those modes to DRM_MODE_DPMS_OFF in the CRTC.
+	 */
+
+	if (IS_CDV(dev))
+		dev_priv->ops->disable_sr(dev);
+
+	switch (mode) {
+	case DRM_MODE_DPMS_ON:
+	case DRM_MODE_DPMS_STANDBY:
+	case DRM_MODE_DPMS_SUSPEND:
+		if (gma_crtc->active)
+			break;
+
+		gma_crtc->active = true;
+
+		/* Enable the DPLL */
+		temp = REG_READ(map->dpll);
+		if ((temp & DPLL_VCO_ENABLE) == 0) {
+			REG_WRITE(map->dpll, temp);
+			REG_READ(map->dpll);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
+			REG_READ(map->dpll);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+			REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE);
+			REG_READ(map->dpll);
+			/* Wait for the clocks to stabilize. */
+			udelay(150);
+		}
+
+		/* Enable the plane */
+		temp = REG_READ(map->cntr);
+		if ((temp & DISPLAY_PLANE_ENABLE) == 0) {
+			REG_WRITE(map->cntr,
+				  temp | DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(map->base, REG_READ(map->base));
+		}
+
+		udelay(150);
+
+		/* Enable the pipe */
+		temp = REG_READ(map->conf);
+		if ((temp & PIPEACONF_ENABLE) == 0)
+			REG_WRITE(map->conf, temp | PIPEACONF_ENABLE);
+
+		temp = REG_READ(map->status);
+		temp &= ~(0xFFFF);
+		temp |= PIPE_FIFO_UNDERRUN;
+		REG_WRITE(map->status, temp);
+		REG_READ(map->status);
+
+		gma_crtc_load_lut(crtc);
+
+		/* Give the overlay scaler a chance to enable
+		 * if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, true); TODO */
+		break;
+	case DRM_MODE_DPMS_OFF:
+		if (!gma_crtc->active)
+			break;
+
+		gma_crtc->active = false;
+
+		/* Give the overlay scaler a chance to disable
+		 * if it's on this pipe */
+		/* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */
+
+		/* Disable the VGA plane that we never use */
+		REG_WRITE(VGACNTRL, VGA_DISP_DISABLE);
+
+		/* Turn off vblank interrupts */
+		drm_vblank_off(dev, pipe);
+
+		/* Wait for vblank for the disable to take effect */
+		gma_wait_for_vblank(dev);
+
+		/* Disable plane */
+		temp = REG_READ(map->cntr);
+		if ((temp & DISPLAY_PLANE_ENABLE) != 0) {
+			REG_WRITE(map->cntr,
+				  temp & ~DISPLAY_PLANE_ENABLE);
+			/* Flush the plane changes */
+			REG_WRITE(map->base, REG_READ(map->base));
+			REG_READ(map->base);
+		}
+
+		/* Disable pipe */
+		temp = REG_READ(map->conf);
+		if ((temp & PIPEACONF_ENABLE) != 0) {
+			REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE);
+			REG_READ(map->conf);
+		}
+
+		/* Wait for vblank for the disable to take effect. */
+		gma_wait_for_vblank(dev);
+
+		udelay(150);
+
+		/* Disable DPLL */
+		temp = REG_READ(map->dpll);
+		if ((temp & DPLL_VCO_ENABLE) != 0) {
+			REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE);
+			REG_READ(map->dpll);
+		}
+
+		/* Wait for the clocks to turn off. */
+		udelay(150);
+		break;
+	}
+
+	if (IS_CDV(dev))
+		dev_priv->ops->update_wm(dev, crtc);
+
+	/* Set FIFO watermarks */
+	REG_WRITE(DSPARB, 0x3F3E);
+}
+
+int gma_crtc_cursor_set(struct drm_crtc *crtc,
+			struct drm_file *file_priv,
+			uint32_t handle,
+			uint32_t width, uint32_t height)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+	int pipe = gma_crtc->pipe;
+	uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
+	uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
+	uint32_t temp;
+	size_t addr = 0;
+	struct gtt_range *gt;
+	struct gtt_range *cursor_gt = gma_crtc->cursor_gt;
+	struct drm_gem_object *obj;
+	void *tmp_dst, *tmp_src;
+	int ret = 0, i, cursor_pages;
+
+	/* If we didn't get a handle then turn the cursor off */
+	if (!handle) {
+		temp = CURSOR_MODE_DISABLE;
+
+		if (gma_power_begin(dev, false)) {
+			REG_WRITE(control, temp);
+			REG_WRITE(base, 0);
+			gma_power_end(dev);
+		}
+
+		/* Unpin the old GEM object */
+		if (gma_crtc->cursor_obj) {
+			gt = container_of(gma_crtc->cursor_obj,
+					  struct gtt_range, gem);
+			psb_gtt_unpin(gt);
+			drm_gem_object_unreference(gma_crtc->cursor_obj);
+			gma_crtc->cursor_obj = NULL;
+		}
+
+		return 0;
+	}
+
+	/* Currently we only support 64x64 cursors */
+	if (width != 64 || height != 64) {
+		dev_dbg(dev->dev, "We currently only support 64x64 cursors\n");
+		return -EINVAL;
+	}
+
+	obj = drm_gem_object_lookup(dev, file_priv, handle);
+	if (!obj)
+		return -ENOENT;
+
+	if (obj->size < width * height * 4) {
+		dev_dbg(dev->dev, "Buffer is too small\n");
+		ret = -ENOMEM;
+		goto unref_cursor;
+	}
+
+	gt = container_of(obj, struct gtt_range, gem);
+
+	/* Pin the memory into the GTT */
+	ret = psb_gtt_pin(gt);
+	if (ret) {
+		dev_err(dev->dev, "Can not pin down handle 0x%x\n", handle);
+		goto unref_cursor;
+	}
+
+	if (dev_priv->ops->cursor_needs_phys) {
+		if (cursor_gt == NULL) {
+			dev_err(dev->dev, "No hardware cursor mem available");
+			ret = -ENOMEM;
+			goto unref_cursor;
+		}
+
+		/* Prevent overflow */
+		if (gt->npage > 4)
+			cursor_pages = 4;
+		else
+			cursor_pages = gt->npage;
+
+		/* Copy the cursor to cursor mem */
+		tmp_dst = dev_priv->vram_addr + cursor_gt->offset;
+		for (i = 0; i < cursor_pages; i++) {
+			tmp_src = kmap(gt->pages[i]);
+			memcpy(tmp_dst, tmp_src, PAGE_SIZE);
+			kunmap(gt->pages[i]);
+			tmp_dst += PAGE_SIZE;
+		}
+
+		addr = gma_crtc->cursor_addr;
+	} else {
+		addr = gt->offset;
+		gma_crtc->cursor_addr = addr;
+	}
+
+	temp = 0;
+	/* set the pipe for the cursor */
+	temp |= (pipe << 28);
+	temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE(control, temp);
+		REG_WRITE(base, addr);
+		gma_power_end(dev);
+	}
+
+	/* unpin the old bo */
+	if (gma_crtc->cursor_obj) {
+		gt = container_of(gma_crtc->cursor_obj, struct gtt_range, gem);
+		psb_gtt_unpin(gt);
+		drm_gem_object_unreference(gma_crtc->cursor_obj);
+	}
+
+	gma_crtc->cursor_obj = obj;
+	return ret;
+
+unref_cursor:
+	drm_gem_object_unreference(obj);
+	return ret;
+}
+
+int gma_crtc_cursor_move(struct drm_crtc *crtc, int x, int y)
+{
+	struct drm_device *dev = crtc->dev;
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+	int pipe = gma_crtc->pipe;
+	uint32_t temp = 0;
+	uint32_t addr;
+
+	if (x < 0) {
+		temp |= (CURSOR_POS_SIGN << CURSOR_X_SHIFT);
+		x = -x;
+	}
+	if (y < 0) {
+		temp |= (CURSOR_POS_SIGN << CURSOR_Y_SHIFT);
+		y = -y;
+	}
+
+	temp |= ((x & CURSOR_POS_MASK) << CURSOR_X_SHIFT);
+	temp |= ((y & CURSOR_POS_MASK) << CURSOR_Y_SHIFT);
+
+	addr = gma_crtc->cursor_addr;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE((pipe == 0) ? CURAPOS : CURBPOS, temp);
+		REG_WRITE((pipe == 0) ? CURABASE : CURBBASE, addr);
+		gma_power_end(dev);
+	}
+	return 0;
+}
+
+bool gma_crtc_mode_fixup(struct drm_crtc *crtc,
+			 const struct drm_display_mode *mode,
+			 struct drm_display_mode *adjusted_mode)
+{
+	return true;
+}
+
+void gma_crtc_prepare(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+}
+
+void gma_crtc_commit(struct drm_crtc *crtc)
+{
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_ON);
+}
+
+void gma_crtc_disable(struct drm_crtc *crtc)
+{
+	struct gtt_range *gt;
+	struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+
+	crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+
+	if (crtc->fb) {
+		gt = to_psb_fb(crtc->fb)->gtt;
+		psb_gtt_unpin(gt);
+	}
+}
+
+void gma_crtc_destroy(struct drm_crtc *crtc)
+{
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+
+	kfree(gma_crtc->crtc_state);
+	drm_crtc_cleanup(crtc);
+	kfree(gma_crtc);
+}
+
+int gma_crtc_set_config(struct drm_mode_set *set)
+{
+	struct drm_device *dev = set->crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	int ret;
+
+	if (!dev_priv->rpm_enabled)
+		return drm_crtc_helper_set_config(set);
+
+	pm_runtime_forbid(&dev->pdev->dev);
+	ret = drm_crtc_helper_set_config(set);
+	pm_runtime_allow(&dev->pdev->dev);
+
+	return ret;
+}
+
+/**
+ * Save HW states of given crtc
+ */
+void gma_crtc_save(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct gma_crtc *gma_crtc = to_gma_crtc(crtc);
+	struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
+	const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
+	uint32_t palette_reg;
+	int i;
+
+	if (!crtc_state) {
+		dev_err(dev->dev, "No CRTC state found\n");
+		return;
+	}
+
+	crtc_state->saveDSPCNTR = REG_READ(map->cntr);
+	crtc_state->savePIPECONF = REG_READ(map->conf);
+	crtc_state->savePIPESRC = REG_READ(map->src);
+	crtc_state->saveFP0 = REG_READ(map->fp0);
+	crtc_state->saveFP1 = REG_READ(map->fp1);
+	crtc_state->saveDPLL = REG_READ(map->dpll);
+	crtc_state->saveHTOTAL = REG_READ(map->htotal);
+	crtc_state->saveHBLANK = REG_READ(map->hblank);
+	crtc_state->saveHSYNC = REG_READ(map->hsync);
+	crtc_state->saveVTOTAL = REG_READ(map->vtotal);
+	crtc_state->saveVBLANK = REG_READ(map->vblank);
+	crtc_state->saveVSYNC = REG_READ(map->vsync);
+	crtc_state->saveDSPSTRIDE = REG_READ(map->stride);
+
+	/* NOTE: DSPSIZE DSPPOS only for psb */
+	crtc_state->saveDSPSIZE = REG_READ(map->size);
+	crtc_state->saveDSPPOS = REG_READ(map->pos);
+
+	crtc_state->saveDSPBASE = REG_READ(map->base);
+
+	palette_reg = map->palette;
+	for (i = 0; i < 256; ++i)
+		crtc_state->savePalette[i] = REG_READ(palette_reg + (i << 2));
+}
+
+/**
+ * Restore HW states of given crtc
+ */
+void gma_crtc_restore(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_psb_private *dev_priv = dev->dev_private;
+	struct gma_crtc *gma_crtc =  to_gma_crtc(crtc);
+	struct psb_intel_crtc_state *crtc_state = gma_crtc->crtc_state;
+	const struct psb_offset *map = &dev_priv->regmap[gma_crtc->pipe];
+	uint32_t palette_reg;
+	int i;
+
+	if (!crtc_state) {
+		dev_err(dev->dev, "No crtc state\n");
+		return;
+	}
+
+	if (crtc_state->saveDPLL & DPLL_VCO_ENABLE) {
+		REG_WRITE(map->dpll,
+			crtc_state->saveDPLL & ~DPLL_VCO_ENABLE);
+		REG_READ(map->dpll);
+		udelay(150);
+	}
+
+	REG_WRITE(map->fp0, crtc_state->saveFP0);
+	REG_READ(map->fp0);
+
+	REG_WRITE(map->fp1, crtc_state->saveFP1);
+	REG_READ(map->fp1);
+
+	REG_WRITE(map->dpll, crtc_state->saveDPLL);
+	REG_READ(map->dpll);
+	udelay(150);
+
+	REG_WRITE(map->htotal, crtc_state->saveHTOTAL);
+	REG_WRITE(map->hblank, crtc_state->saveHBLANK);
+	REG_WRITE(map->hsync, crtc_state->saveHSYNC);
+	REG_WRITE(map->vtotal, crtc_state->saveVTOTAL);
+	REG_WRITE(map->vblank, crtc_state->saveVBLANK);
+	REG_WRITE(map->vsync, crtc_state->saveVSYNC);
+	REG_WRITE(map->stride, crtc_state->saveDSPSTRIDE);
+
+	REG_WRITE(map->size, crtc_state->saveDSPSIZE);
+	REG_WRITE(map->pos, crtc_state->saveDSPPOS);
+
+	REG_WRITE(map->src, crtc_state->savePIPESRC);
+	REG_WRITE(map->base, crtc_state->saveDSPBASE);
+	REG_WRITE(map->conf, crtc_state->savePIPECONF);
+
+	gma_wait_for_vblank(dev);
+
+	REG_WRITE(map->cntr, crtc_state->saveDSPCNTR);
+	REG_WRITE(map->base, crtc_state->saveDSPBASE);
+
+	gma_wait_for_vblank(dev);
+
+	palette_reg = map->palette;
+	for (i = 0; i < 256; ++i)
+		REG_WRITE(palette_reg + (i << 2), crtc_state->savePalette[i]);
+}
+
+void gma_encoder_prepare(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs =
+	    encoder->helper_private;
+	/* lvds has its own version of prepare see psb_intel_lvds_prepare */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_OFF);
+}
+
+void gma_encoder_commit(struct drm_encoder *encoder)
+{
+	struct drm_encoder_helper_funcs *encoder_funcs =
+	    encoder->helper_private;
+	/* lvds has its own version of commit see psb_intel_lvds_commit */
+	encoder_funcs->dpms(encoder, DRM_MODE_DPMS_ON);
+}
+
+void gma_encoder_destroy(struct drm_encoder *encoder)
+{
+	struct gma_encoder *intel_encoder = to_gma_encoder(encoder);
+
+	drm_encoder_cleanup(encoder);
+	kfree(intel_encoder);
+}
+
+/* Currently there is only a 1:1 mapping of encoders and connectors */
+struct drm_encoder *gma_best_encoder(struct drm_connector *connector)
+{
+	struct gma_encoder *gma_encoder = gma_attached_encoder(connector);
+
+	return &gma_encoder->base;
+}
+
+void gma_connector_attach_encoder(struct gma_connector *connector,
+				  struct gma_encoder *encoder)
+{
+	connector->encoder = encoder;
+	drm_mode_connector_attach_encoder(&connector->base,
+					  &encoder->base);
+}
+
+#define GMA_PLL_INVALID(s) { /* DRM_ERROR(s); */ return false; }
+
+bool gma_pll_is_valid(struct drm_crtc *crtc,
+		      const struct gma_limit_t *limit,
+		      struct gma_clock_t *clock)
+{
+	if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
+		GMA_PLL_INVALID("p1 out of range");
+	if (clock->p < limit->p.min || limit->p.max < clock->p)
+		GMA_PLL_INVALID("p out of range");
+	if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
+		GMA_PLL_INVALID("m2 out of range");
+	if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
+		GMA_PLL_INVALID("m1 out of range");
+	/* On CDV m1 is always 0 */
+	if (clock->m1 <= clock->m2 && clock->m1 != 0)
+		GMA_PLL_INVALID("m1 <= m2 && m1 != 0");
+	if (clock->m < limit->m.min || limit->m.max < clock->m)
+		GMA_PLL_INVALID("m out of range");
+	if (clock->n < limit->n.min || limit->n.max < clock->n)
+		GMA_PLL_INVALID("n out of range");
+	if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
+		GMA_PLL_INVALID("vco out of range");
+	/* XXX: We may need to be checking "Dot clock"
+	 * depending on the multiplier, connector, etc.,
+	 * rather than just a single range.
+	 */
+	if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
+		GMA_PLL_INVALID("dot out of range");
+
+	return true;
+}
+
+bool gma_find_best_pll(const struct gma_limit_t *limit,
+		       struct drm_crtc *crtc, int target, int refclk,
+		       struct gma_clock_t *best_clock)
+{
+	struct drm_device *dev = crtc->dev;
+	const struct gma_clock_funcs *clock_funcs =
+						to_gma_crtc(crtc)->clock_funcs;
+	struct gma_clock_t clock;
+	int err = target;
+
+	if (gma_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+	    (REG_READ(LVDS) & LVDS_PORT_EN) != 0) {
+		/*
+		 * For LVDS, if the panel is on, just rely on its current
+		 * settings for dual-channel.  We haven't figured out how to
+		 * reliably set up different single/dual channel state, if we
+		 * even can.
+		 */
+		if ((REG_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
+		    LVDS_CLKB_POWER_UP)
+			clock.p2 = limit->p2.p2_fast;
+		else
+			clock.p2 = limit->p2.p2_slow;
+	} else {
+		if (target < limit->p2.dot_limit)
+			clock.p2 = limit->p2.p2_slow;
+		else
+			clock.p2 = limit->p2.p2_fast;
+	}
+
+	memset(best_clock, 0, sizeof(*best_clock));
+
+	/* m1 is always 0 on CDV so the outmost loop will run just once */
+	for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
+		for (clock.m2 = limit->m2.min;
+		     (clock.m2 < clock.m1 || clock.m1 == 0) &&
+		      clock.m2 <= limit->m2.max; clock.m2++) {
+			for (clock.n = limit->n.min;
+			     clock.n <= limit->n.max; clock.n++) {
+				for (clock.p1 = limit->p1.min;
+				     clock.p1 <= limit->p1.max;
+				     clock.p1++) {
+					int this_err;
+
+					clock_funcs->clock(refclk, &clock);
+
+					if (!clock_funcs->pll_is_valid(crtc,
+								limit, &clock))
+						continue;
+
+					this_err = abs(clock.dot - target);
+					if (this_err < err) {
+						*best_clock = clock;
+						err = this_err;
+					}
+				}
+			}
+		}
+	}
+
+	return err != target;
+}