diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_ddi.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_ddi.c | 754 |
1 files changed, 285 insertions, 469 deletions
diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index fb961bb81903..324211ac9c55 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -174,6 +174,8 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) * mode set "sequence for CRT port" document: * - TP1 to TP2 time with the default value * - FDI delay to 90h + * + * WaFDIAutoLinkSetTimingOverrride:hsw */ I915_WRITE(_FDI_RXA_MISC, FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2) | @@ -181,7 +183,8 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) /* Enable the PCH Receiver FDI PLL */ rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE | - FDI_RX_PLL_ENABLE | ((intel_crtc->fdi_lanes - 1) << 19); + FDI_RX_PLL_ENABLE | + FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); I915_WRITE(_FDI_RXA_CTL, rx_ctl_val); POSTING_READ(_FDI_RXA_CTL); udelay(220); @@ -209,7 +212,7 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) * port reversal bit */ I915_WRITE(DDI_BUF_CTL(PORT_E), DDI_BUF_CTL_ENABLE | - ((intel_crtc->fdi_lanes - 1) << 1) | + ((intel_crtc->config.fdi_lanes - 1) << 1) | hsw_ddi_buf_ctl_values[i / 2]); POSTING_READ(DDI_BUF_CTL(PORT_E)); @@ -278,392 +281,6 @@ void hsw_fdi_link_train(struct drm_crtc *crtc) DRM_ERROR("FDI link training failed!\n"); } -/* WRPLL clock dividers */ -struct wrpll_tmds_clock { - u32 clock; - u16 p; /* Post divider */ - u16 n2; /* Feedback divider */ - u16 r2; /* Reference divider */ -}; - -/* Table of matching values for WRPLL clocks programming for each frequency. - * The code assumes this table is sorted. */ -static const struct wrpll_tmds_clock wrpll_tmds_clock_table[] = { - {19750, 38, 25, 18}, - {20000, 48, 32, 18}, - {21000, 36, 21, 15}, - {21912, 42, 29, 17}, - {22000, 36, 22, 15}, - {23000, 36, 23, 15}, - {23500, 40, 40, 23}, - {23750, 26, 16, 14}, - {24000, 36, 24, 15}, - {25000, 36, 25, 15}, - {25175, 26, 40, 33}, - {25200, 30, 21, 15}, - {26000, 36, 26, 15}, - {27000, 30, 21, 14}, - {27027, 18, 100, 111}, - {27500, 30, 29, 19}, - {28000, 34, 30, 17}, - {28320, 26, 30, 22}, - {28322, 32, 42, 25}, - {28750, 24, 23, 18}, - {29000, 30, 29, 18}, - {29750, 32, 30, 17}, - {30000, 30, 25, 15}, - {30750, 30, 41, 24}, - {31000, 30, 31, 18}, - {31500, 30, 28, 16}, - {32000, 30, 32, 18}, - {32500, 28, 32, 19}, - {33000, 24, 22, 15}, - {34000, 28, 30, 17}, - {35000, 26, 32, 19}, - {35500, 24, 30, 19}, - {36000, 26, 26, 15}, - {36750, 26, 46, 26}, - {37000, 24, 23, 14}, - {37762, 22, 40, 26}, - {37800, 20, 21, 15}, - {38000, 24, 27, 16}, - {38250, 24, 34, 20}, - {39000, 24, 26, 15}, - {40000, 24, 32, 18}, - {40500, 20, 21, 14}, - {40541, 22, 147, 89}, - {40750, 18, 19, 14}, - {41000, 16, 17, 14}, - {41500, 22, 44, 26}, - {41540, 22, 44, 26}, - {42000, 18, 21, 15}, - {42500, 22, 45, 26}, - {43000, 20, 43, 27}, - {43163, 20, 24, 15}, - {44000, 18, 22, 15}, - {44900, 20, 108, 65}, - {45000, 20, 25, 15}, - {45250, 20, 52, 31}, - {46000, 18, 23, 15}, - {46750, 20, 45, 26}, - {47000, 20, 40, 23}, - {48000, 18, 24, 15}, - {49000, 18, 49, 30}, - {49500, 16, 22, 15}, - {50000, 18, 25, 15}, - {50500, 18, 32, 19}, - {51000, 18, 34, 20}, - {52000, 18, 26, 15}, - {52406, 14, 34, 25}, - {53000, 16, 22, 14}, - {54000, 16, 24, 15}, - {54054, 16, 173, 108}, - {54500, 14, 24, 17}, - {55000, 12, 22, 18}, - {56000, 14, 45, 31}, - {56250, 16, 25, 15}, - {56750, 14, 25, 17}, - {57000, 16, 27, 16}, - {58000, 16, 43, 25}, - {58250, 16, 38, 22}, - {58750, 16, 40, 23}, - {59000, 14, 26, 17}, - {59341, 14, 40, 26}, - {59400, 16, 44, 25}, - {60000, 16, 32, 18}, - {60500, 12, 39, 29}, - {61000, 14, 49, 31}, - {62000, 14, 37, 23}, - {62250, 14, 42, 26}, - {63000, 12, 21, 15}, - {63500, 14, 28, 17}, - {64000, 12, 27, 19}, - {65000, 14, 32, 19}, - {65250, 12, 29, 20}, - {65500, 12, 32, 22}, - {66000, 12, 22, 15}, - {66667, 14, 38, 22}, - {66750, 10, 21, 17}, - {67000, 14, 33, 19}, - {67750, 14, 58, 33}, - {68000, 14, 30, 17}, - {68179, 14, 46, 26}, - {68250, 14, 46, 26}, - {69000, 12, 23, 15}, - {70000, 12, 28, 18}, - {71000, 12, 30, 19}, - {72000, 12, 24, 15}, - {73000, 10, 23, 17}, - {74000, 12, 23, 14}, - {74176, 8, 100, 91}, - {74250, 10, 22, 16}, - {74481, 12, 43, 26}, - {74500, 10, 29, 21}, - {75000, 12, 25, 15}, - {75250, 10, 39, 28}, - {76000, 12, 27, 16}, - {77000, 12, 53, 31}, - {78000, 12, 26, 15}, - {78750, 12, 28, 16}, - {79000, 10, 38, 26}, - {79500, 10, 28, 19}, - {80000, 12, 32, 18}, - {81000, 10, 21, 14}, - {81081, 6, 100, 111}, - {81624, 8, 29, 24}, - {82000, 8, 17, 14}, - {83000, 10, 40, 26}, - {83950, 10, 28, 18}, - {84000, 10, 28, 18}, - {84750, 6, 16, 17}, - {85000, 6, 17, 18}, - {85250, 10, 30, 19}, - {85750, 10, 27, 17}, - {86000, 10, 43, 27}, - {87000, 10, 29, 18}, - {88000, 10, 44, 27}, - {88500, 10, 41, 25}, - {89000, 10, 28, 17}, - {89012, 6, 90, 91}, - {89100, 10, 33, 20}, - {90000, 10, 25, 15}, - {91000, 10, 32, 19}, - {92000, 10, 46, 27}, - {93000, 10, 31, 18}, - {94000, 10, 40, 23}, - {94500, 10, 28, 16}, - {95000, 10, 44, 25}, - {95654, 10, 39, 22}, - {95750, 10, 39, 22}, - {96000, 10, 32, 18}, - {97000, 8, 23, 16}, - {97750, 8, 42, 29}, - {98000, 8, 45, 31}, - {99000, 8, 22, 15}, - {99750, 8, 34, 23}, - {100000, 6, 20, 18}, - {100500, 6, 19, 17}, - {101000, 6, 37, 33}, - {101250, 8, 21, 14}, - {102000, 6, 17, 15}, - {102250, 6, 25, 22}, - {103000, 8, 29, 19}, - {104000, 8, 37, 24}, - {105000, 8, 28, 18}, - {106000, 8, 22, 14}, - {107000, 8, 46, 29}, - {107214, 8, 27, 17}, - {108000, 8, 24, 15}, - {108108, 8, 173, 108}, - {109000, 6, 23, 19}, - {110000, 6, 22, 18}, - {110013, 6, 22, 18}, - {110250, 8, 49, 30}, - {110500, 8, 36, 22}, - {111000, 8, 23, 14}, - {111264, 8, 150, 91}, - {111375, 8, 33, 20}, - {112000, 8, 63, 38}, - {112500, 8, 25, 15}, - {113100, 8, 57, 34}, - {113309, 8, 42, 25}, - {114000, 8, 27, 16}, - {115000, 6, 23, 18}, - {116000, 8, 43, 25}, - {117000, 8, 26, 15}, - {117500, 8, 40, 23}, - {118000, 6, 38, 29}, - {119000, 8, 30, 17}, - {119500, 8, 46, 26}, - {119651, 8, 39, 22}, - {120000, 8, 32, 18}, - {121000, 6, 39, 29}, - {121250, 6, 31, 23}, - {121750, 6, 23, 17}, - {122000, 6, 42, 31}, - {122614, 6, 30, 22}, - {123000, 6, 41, 30}, - {123379, 6, 37, 27}, - {124000, 6, 51, 37}, - {125000, 6, 25, 18}, - {125250, 4, 13, 14}, - {125750, 4, 27, 29}, - {126000, 6, 21, 15}, - {127000, 6, 24, 17}, - {127250, 6, 41, 29}, - {128000, 6, 27, 19}, - {129000, 6, 43, 30}, - {129859, 4, 25, 26}, - {130000, 6, 26, 18}, - {130250, 6, 42, 29}, - {131000, 6, 32, 22}, - {131500, 6, 38, 26}, - {131850, 6, 41, 28}, - {132000, 6, 22, 15}, - {132750, 6, 28, 19}, - {133000, 6, 34, 23}, - {133330, 6, 37, 25}, - {134000, 6, 61, 41}, - {135000, 6, 21, 14}, - {135250, 6, 167, 111}, - {136000, 6, 62, 41}, - {137000, 6, 35, 23}, - {138000, 6, 23, 15}, - {138500, 6, 40, 26}, - {138750, 6, 37, 24}, - {139000, 6, 34, 22}, - {139050, 6, 34, 22}, - {139054, 6, 34, 22}, - {140000, 6, 28, 18}, - {141000, 6, 36, 23}, - {141500, 6, 22, 14}, - {142000, 6, 30, 19}, - {143000, 6, 27, 17}, - {143472, 4, 17, 16}, - {144000, 6, 24, 15}, - {145000, 6, 29, 18}, - {146000, 6, 47, 29}, - {146250, 6, 26, 16}, - {147000, 6, 49, 30}, - {147891, 6, 23, 14}, - {148000, 6, 23, 14}, - {148250, 6, 28, 17}, - {148352, 4, 100, 91}, - {148500, 6, 33, 20}, - {149000, 6, 48, 29}, - {150000, 6, 25, 15}, - {151000, 4, 19, 17}, - {152000, 6, 27, 16}, - {152280, 6, 44, 26}, - {153000, 6, 34, 20}, - {154000, 6, 53, 31}, - {155000, 6, 31, 18}, - {155250, 6, 50, 29}, - {155750, 6, 45, 26}, - {156000, 6, 26, 15}, - {157000, 6, 61, 35}, - {157500, 6, 28, 16}, - {158000, 6, 65, 37}, - {158250, 6, 44, 25}, - {159000, 6, 53, 30}, - {159500, 6, 39, 22}, - {160000, 6, 32, 18}, - {161000, 4, 31, 26}, - {162000, 4, 18, 15}, - {162162, 4, 131, 109}, - {162500, 4, 53, 44}, - {163000, 4, 29, 24}, - {164000, 4, 17, 14}, - {165000, 4, 22, 18}, - {166000, 4, 32, 26}, - {167000, 4, 26, 21}, - {168000, 4, 46, 37}, - {169000, 4, 104, 83}, - {169128, 4, 64, 51}, - {169500, 4, 39, 31}, - {170000, 4, 34, 27}, - {171000, 4, 19, 15}, - {172000, 4, 51, 40}, - {172750, 4, 32, 25}, - {172800, 4, 32, 25}, - {173000, 4, 41, 32}, - {174000, 4, 49, 38}, - {174787, 4, 22, 17}, - {175000, 4, 35, 27}, - {176000, 4, 30, 23}, - {177000, 4, 38, 29}, - {178000, 4, 29, 22}, - {178500, 4, 37, 28}, - {179000, 4, 53, 40}, - {179500, 4, 73, 55}, - {180000, 4, 20, 15}, - {181000, 4, 55, 41}, - {182000, 4, 31, 23}, - {183000, 4, 42, 31}, - {184000, 4, 30, 22}, - {184750, 4, 26, 19}, - {185000, 4, 37, 27}, - {186000, 4, 51, 37}, - {187000, 4, 36, 26}, - {188000, 4, 32, 23}, - {189000, 4, 21, 15}, - {190000, 4, 38, 27}, - {190960, 4, 41, 29}, - {191000, 4, 41, 29}, - {192000, 4, 27, 19}, - {192250, 4, 37, 26}, - {193000, 4, 20, 14}, - {193250, 4, 53, 37}, - {194000, 4, 23, 16}, - {194208, 4, 23, 16}, - {195000, 4, 26, 18}, - {196000, 4, 45, 31}, - {197000, 4, 35, 24}, - {197750, 4, 41, 28}, - {198000, 4, 22, 15}, - {198500, 4, 25, 17}, - {199000, 4, 28, 19}, - {200000, 4, 37, 25}, - {201000, 4, 61, 41}, - {202000, 4, 112, 75}, - {202500, 4, 21, 14}, - {203000, 4, 146, 97}, - {204000, 4, 62, 41}, - {204750, 4, 44, 29}, - {205000, 4, 38, 25}, - {206000, 4, 29, 19}, - {207000, 4, 23, 15}, - {207500, 4, 40, 26}, - {208000, 4, 37, 24}, - {208900, 4, 48, 31}, - {209000, 4, 48, 31}, - {209250, 4, 31, 20}, - {210000, 4, 28, 18}, - {211000, 4, 25, 16}, - {212000, 4, 22, 14}, - {213000, 4, 30, 19}, - {213750, 4, 38, 24}, - {214000, 4, 46, 29}, - {214750, 4, 35, 22}, - {215000, 4, 43, 27}, - {216000, 4, 24, 15}, - {217000, 4, 37, 23}, - {218000, 4, 42, 26}, - {218250, 4, 42, 26}, - {218750, 4, 34, 21}, - {219000, 4, 47, 29}, - {220000, 4, 44, 27}, - {220640, 4, 49, 30}, - {220750, 4, 36, 22}, - {221000, 4, 36, 22}, - {222000, 4, 23, 14}, - {222525, 4, 28, 17}, - {222750, 4, 33, 20}, - {227000, 4, 37, 22}, - {230250, 4, 29, 17}, - {233500, 4, 38, 22}, - {235000, 4, 40, 23}, - {238000, 4, 30, 17}, - {241500, 2, 17, 19}, - {245250, 2, 20, 22}, - {247750, 2, 22, 24}, - {253250, 2, 15, 16}, - {256250, 2, 18, 19}, - {262500, 2, 31, 32}, - {267250, 2, 66, 67}, - {268500, 2, 94, 95}, - {270000, 2, 14, 14}, - {272500, 2, 77, 76}, - {273750, 2, 57, 56}, - {280750, 2, 24, 23}, - {281250, 2, 23, 22}, - {286000, 2, 17, 16}, - {291750, 2, 26, 24}, - {296703, 2, 56, 51}, - {297000, 2, 22, 20}, - {298000, 2, 21, 19}, -}; - static void intel_ddi_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, struct drm_display_mode *adjusted_mode) @@ -675,7 +292,7 @@ static void intel_ddi_mode_set(struct drm_encoder *encoder, int pipe = intel_crtc->pipe; int type = intel_encoder->type; - DRM_DEBUG_KMS("Preparing DDI mode for Haswell on port %c, pipe %c\n", + DRM_DEBUG_KMS("Preparing DDI mode on port %c, pipe %c\n", port_name(port), pipe_name(pipe)); intel_crtc->eld_vld = false; @@ -686,22 +303,7 @@ static void intel_ddi_mode_set(struct drm_encoder *encoder, intel_dp->DP = intel_dig_port->port_reversal | DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW; - switch (intel_dp->lane_count) { - case 1: - intel_dp->DP |= DDI_PORT_WIDTH_X1; - break; - case 2: - intel_dp->DP |= DDI_PORT_WIDTH_X2; - break; - case 4: - intel_dp->DP |= DDI_PORT_WIDTH_X4; - break; - default: - intel_dp->DP |= DDI_PORT_WIDTH_X4; - WARN(1, "Unexpected DP lane count %d\n", - intel_dp->lane_count); - break; - } + intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count); if (intel_dp->has_audio) { DRM_DEBUG_DRIVER("DP audio on pipe %c on DDI\n", @@ -748,8 +350,8 @@ intel_ddi_get_crtc_encoder(struct drm_crtc *crtc) } if (num_encoders != 1) - WARN(1, "%d encoders on crtc for pipe %d\n", num_encoders, - intel_crtc->pipe); + WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders, + pipe_name(intel_crtc->pipe)); BUG_ON(ret == NULL); return ret; @@ -802,30 +404,227 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc) intel_crtc->ddi_pll_sel = PORT_CLK_SEL_NONE; } -static void intel_ddi_calculate_wrpll(int clock, int *p, int *n2, int *r2) +#define LC_FREQ 2700 +#define LC_FREQ_2K (LC_FREQ * 2000) + +#define P_MIN 2 +#define P_MAX 64 +#define P_INC 2 + +/* Constraints for PLL good behavior */ +#define REF_MIN 48 +#define REF_MAX 400 +#define VCO_MIN 2400 +#define VCO_MAX 4800 + +#define ABS_DIFF(a, b) ((a > b) ? (a - b) : (b - a)) + +struct wrpll_rnp { + unsigned p, n2, r2; +}; + +static unsigned wrpll_get_budget_for_freq(int clock) +{ + unsigned budget; + + switch (clock) { + case 25175000: + case 25200000: + case 27000000: + case 27027000: + case 37762500: + case 37800000: + case 40500000: + case 40541000: + case 54000000: + case 54054000: + case 59341000: + case 59400000: + case 72000000: + case 74176000: + case 74250000: + case 81000000: + case 81081000: + case 89012000: + case 89100000: + case 108000000: + case 108108000: + case 111264000: + case 111375000: + case 148352000: + case 148500000: + case 162000000: + case 162162000: + case 222525000: + case 222750000: + case 296703000: + case 297000000: + budget = 0; + break; + case 233500000: + case 245250000: + case 247750000: + case 253250000: + case 298000000: + budget = 1500; + break; + case 169128000: + case 169500000: + case 179500000: + case 202000000: + budget = 2000; + break; + case 256250000: + case 262500000: + case 270000000: + case 272500000: + case 273750000: + case 280750000: + case 281250000: + case 286000000: + case 291750000: + budget = 4000; + break; + case 267250000: + case 268500000: + budget = 5000; + break; + default: + budget = 1000; + break; + } + + return budget; +} + +static void wrpll_update_rnp(uint64_t freq2k, unsigned budget, + unsigned r2, unsigned n2, unsigned p, + struct wrpll_rnp *best) { - u32 i; + uint64_t a, b, c, d, diff, diff_best; - for (i = 0; i < ARRAY_SIZE(wrpll_tmds_clock_table); i++) - if (clock <= wrpll_tmds_clock_table[i].clock) - break; + /* No best (r,n,p) yet */ + if (best->p == 0) { + best->p = p; + best->n2 = n2; + best->r2 = r2; + return; + } + + /* + * Output clock is (LC_FREQ_2K / 2000) * N / (P * R), which compares to + * freq2k. + * + * delta = 1e6 * + * abs(freq2k - (LC_FREQ_2K * n2/(p * r2))) / + * freq2k; + * + * and we would like delta <= budget. + * + * If the discrepancy is above the PPM-based budget, always prefer to + * improve upon the previous solution. However, if you're within the + * budget, try to maximize Ref * VCO, that is N / (P * R^2). + */ + a = freq2k * budget * p * r2; + b = freq2k * budget * best->p * best->r2; + diff = ABS_DIFF((freq2k * p * r2), (LC_FREQ_2K * n2)); + diff_best = ABS_DIFF((freq2k * best->p * best->r2), + (LC_FREQ_2K * best->n2)); + c = 1000000 * diff; + d = 1000000 * diff_best; + + if (a < c && b < d) { + /* If both are above the budget, pick the closer */ + if (best->p * best->r2 * diff < p * r2 * diff_best) { + best->p = p; + best->n2 = n2; + best->r2 = r2; + } + } else if (a >= c && b < d) { + /* If A is below the threshold but B is above it? Update. */ + best->p = p; + best->n2 = n2; + best->r2 = r2; + } else if (a >= c && b >= d) { + /* Both are below the limit, so pick the higher n2/(r2*r2) */ + if (n2 * best->r2 * best->r2 > best->n2 * r2 * r2) { + best->p = p; + best->n2 = n2; + best->r2 = r2; + } + } + /* Otherwise a < c && b >= d, do nothing */ +} + +static void +intel_ddi_calculate_wrpll(int clock /* in Hz */, + unsigned *r2_out, unsigned *n2_out, unsigned *p_out) +{ + uint64_t freq2k; + unsigned p, n2, r2; + struct wrpll_rnp best = { 0, 0, 0 }; + unsigned budget; - if (i == ARRAY_SIZE(wrpll_tmds_clock_table)) - i--; + freq2k = clock / 100; - *p = wrpll_tmds_clock_table[i].p; - *n2 = wrpll_tmds_clock_table[i].n2; - *r2 = wrpll_tmds_clock_table[i].r2; + budget = wrpll_get_budget_for_freq(clock); - if (wrpll_tmds_clock_table[i].clock != clock) - DRM_INFO("WRPLL: using settings for %dKHz on %dKHz mode\n", - wrpll_tmds_clock_table[i].clock, clock); + /* Special case handling for 540 pixel clock: bypass WR PLL entirely + * and directly pass the LC PLL to it. */ + if (freq2k == 5400000) { + *n2_out = 2; + *p_out = 1; + *r2_out = 2; + return; + } + + /* + * Ref = LC_FREQ / R, where Ref is the actual reference input seen by + * the WR PLL. + * + * We want R so that REF_MIN <= Ref <= REF_MAX. + * Injecting R2 = 2 * R gives: + * REF_MAX * r2 > LC_FREQ * 2 and + * REF_MIN * r2 < LC_FREQ * 2 + * + * Which means the desired boundaries for r2 are: + * LC_FREQ * 2 / REF_MAX < r2 < LC_FREQ * 2 / REF_MIN + * + */ + for (r2 = LC_FREQ * 2 / REF_MAX + 1; + r2 <= LC_FREQ * 2 / REF_MIN; + r2++) { + + /* + * VCO = N * Ref, that is: VCO = N * LC_FREQ / R + * + * Once again we want VCO_MIN <= VCO <= VCO_MAX. + * Injecting R2 = 2 * R and N2 = 2 * N, we get: + * VCO_MAX * r2 > n2 * LC_FREQ and + * VCO_MIN * r2 < n2 * LC_FREQ) + * + * Which means the desired boundaries for n2 are: + * VCO_MIN * r2 / LC_FREQ < n2 < VCO_MAX * r2 / LC_FREQ + */ + for (n2 = VCO_MIN * r2 / LC_FREQ + 1; + n2 <= VCO_MAX * r2 / LC_FREQ; + n2++) { - DRM_DEBUG_KMS("WRPLL: %dKHz refresh rate with p=%d, n2=%d r2=%d\n", - clock, *p, *n2, *r2); + for (p = P_MIN; p <= P_MAX; p += P_INC) + wrpll_update_rnp(freq2k, budget, + r2, n2, p, &best); + } + } + + *n2_out = best.n2; + *p_out = best.p; + *r2_out = best.r2; + + DRM_DEBUG_KMS("WRPLL: %dHz refresh rate with p=%d, n2=%d r2=%d\n", + clock, *p_out, *n2_out, *r2_out); } -bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock) +bool intel_ddi_pll_mode_set(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc); @@ -835,6 +634,7 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock) int type = intel_encoder->type; enum pipe pipe = intel_crtc->pipe; uint32_t reg, val; + int clock = intel_crtc->config.port_clock; /* TODO: reuse PLLs when possible (compare values) */ @@ -863,7 +663,7 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock) return true; } else if (type == INTEL_OUTPUT_HDMI) { - int p, n2, r2; + unsigned p, n2, r2; if (plls->wrpll1_refcount == 0) { DRM_DEBUG_KMS("Using WRPLL 1 on pipe %c\n", @@ -885,7 +685,7 @@ bool intel_ddi_pll_mode_set(struct drm_crtc *crtc, int clock) WARN(I915_READ(reg) & WRPLL_PLL_ENABLE, "WRPLL already enabled\n"); - intel_ddi_calculate_wrpll(clock, &p, &n2, &r2); + intel_ddi_calculate_wrpll(clock * 1000, &r2, &n2, &p); val = WRPLL_PLL_ENABLE | WRPLL_PLL_SELECT_LCPLL_2700 | WRPLL_DIVIDER_REFERENCE(r2) | WRPLL_DIVIDER_FEEDBACK(n2) | @@ -995,7 +795,7 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) /* Can only use the always-on power well for eDP when * not using the panel fitter, and when not using motion * blur mitigation (which we don't support). */ - if (dev_priv->pch_pf_size) + if (intel_crtc->config.pch_pfit.size) temp |= TRANS_DDI_EDP_INPUT_A_ONOFF; else temp |= TRANS_DDI_EDP_INPUT_A_ON; @@ -1022,7 +822,7 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) } else if (type == INTEL_OUTPUT_ANALOG) { temp |= TRANS_DDI_MODE_SELECT_FDI; - temp |= (intel_crtc->fdi_lanes - 1) << 1; + temp |= (intel_crtc->config.fdi_lanes - 1) << 1; } else if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) { @@ -1030,25 +830,10 @@ void intel_ddi_enable_transcoder_func(struct drm_crtc *crtc) temp |= TRANS_DDI_MODE_SELECT_DP_SST; - switch (intel_dp->lane_count) { - case 1: - temp |= TRANS_DDI_PORT_WIDTH_X1; - break; - case 2: - temp |= TRANS_DDI_PORT_WIDTH_X2; - break; - case 4: - temp |= TRANS_DDI_PORT_WIDTH_X4; - break; - default: - temp |= TRANS_DDI_PORT_WIDTH_X4; - WARN(1, "Unsupported lane count %d\n", - intel_dp->lane_count); - } - + temp |= DDI_PORT_WIDTH(intel_dp->lane_count); } else { - WARN(1, "Invalid encoder type %d for pipe %d\n", - intel_encoder->type, pipe); + WARN(1, "Invalid encoder type %d for pipe %c\n", + intel_encoder->type, pipe_name(pipe)); } I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp); @@ -1148,7 +933,7 @@ bool intel_ddi_get_hw_state(struct intel_encoder *encoder, } } - DRM_DEBUG_KMS("No pipe for ddi port %i found\n", port); + DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port)); return false; } @@ -1334,7 +1119,7 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder) ironlake_edp_backlight_on(intel_dp); } - if (intel_crtc->eld_vld) { + if (intel_crtc->eld_vld && type != INTEL_OUTPUT_EDP) { tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); tmp |= ((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4)); I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); @@ -1352,9 +1137,12 @@ static void intel_disable_ddi(struct intel_encoder *intel_encoder) struct drm_i915_private *dev_priv = dev->dev_private; uint32_t tmp; - tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); - tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << (pipe * 4)); - I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); + if (intel_crtc->eld_vld && type != INTEL_OUTPUT_EDP) { + tmp = I915_READ(HSW_AUD_PIN_ELD_CP_VLD); + tmp &= ~((AUDIO_OUTPUT_ENABLE_A | AUDIO_ELD_VALID_A) << + (pipe * 4)); + I915_WRITE(HSW_AUD_PIN_ELD_CP_VLD, tmp); + } if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); @@ -1366,14 +1154,14 @@ static void intel_disable_ddi(struct intel_encoder *intel_encoder) int intel_ddi_get_cdclk_freq(struct drm_i915_private *dev_priv) { if (I915_READ(HSW_FUSE_STRAP) & HSW_CDCLK_LIMIT) - return 450; + return 450000; else if ((I915_READ(LCPLL_CTL) & LCPLL_CLK_FREQ_MASK) == LCPLL_CLK_FREQ_450) - return 450; + return 450000; else if (IS_ULT(dev_priv->dev)) - return 338; + return 337500; else - return 540; + return 540000; } void intel_ddi_pll_init(struct drm_device *dev) @@ -1386,7 +1174,7 @@ void intel_ddi_pll_init(struct drm_device *dev) * Don't even try to turn it on. */ - DRM_DEBUG_KMS("CDCLK running at %dMHz\n", + DRM_DEBUG_KMS("CDCLK running at %dKHz\n", intel_ddi_get_cdclk_freq(dev_priv)); if (val & LCPLL_CD_SOURCE_FCLK) @@ -1472,6 +1260,27 @@ static void intel_ddi_hot_plug(struct intel_encoder *intel_encoder) intel_dp_check_link_status(intel_dp); } +static void intel_ddi_get_config(struct intel_encoder *encoder, + struct intel_crtc_config *pipe_config) +{ + struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(encoder->base.crtc); + enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; + u32 temp, flags = 0; + + temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder)); + if (temp & TRANS_DDI_PHSYNC) + flags |= DRM_MODE_FLAG_PHSYNC; + else + flags |= DRM_MODE_FLAG_NHSYNC; + if (temp & TRANS_DDI_PVSYNC) + flags |= DRM_MODE_FLAG_PVSYNC; + else + flags |= DRM_MODE_FLAG_NVSYNC; + + pipe_config->adjusted_mode.flags |= flags; +} + static void intel_ddi_destroy(struct drm_encoder *encoder) { /* HDMI has nothing special to destroy, so we can go with this. */ @@ -1482,9 +1291,13 @@ static bool intel_ddi_compute_config(struct intel_encoder *encoder, struct intel_crtc_config *pipe_config) { int type = encoder->type; + int port = intel_ddi_get_encoder_port(encoder); WARN(type == INTEL_OUTPUT_UNKNOWN, "compute_config() on unknown output!\n"); + if (port == PORT_A) + pipe_config->cpu_transcoder = TRANSCODER_EDP; + if (type == INTEL_OUTPUT_HDMI) return intel_hdmi_compute_config(encoder, pipe_config); else @@ -1518,16 +1331,6 @@ void intel_ddi_init(struct drm_device *dev, enum port port) return; } - if (port != PORT_A) { - hdmi_connector = kzalloc(sizeof(struct intel_connector), - GFP_KERNEL); - if (!hdmi_connector) { - kfree(dp_connector); - kfree(intel_dig_port); - return; - } - } - intel_encoder = &intel_dig_port->base; encoder = &intel_encoder->base; @@ -1541,12 +1344,11 @@ void intel_ddi_init(struct drm_device *dev, enum port port) intel_encoder->disable = intel_disable_ddi; intel_encoder->post_disable = intel_ddi_post_disable; intel_encoder->get_hw_state = intel_ddi_get_hw_state; + intel_encoder->get_config = intel_ddi_get_config; intel_dig_port->port = port; intel_dig_port->port_reversal = I915_READ(DDI_BUF_CTL(port)) & DDI_BUF_PORT_REVERSAL; - if (hdmi_connector) - intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); intel_encoder->type = INTEL_OUTPUT_UNKNOWN; @@ -1554,7 +1356,21 @@ void intel_ddi_init(struct drm_device *dev, enum port port) intel_encoder->cloneable = false; intel_encoder->hot_plug = intel_ddi_hot_plug; - if (hdmi_connector) + if (!intel_dp_init_connector(intel_dig_port, dp_connector)) { + drm_encoder_cleanup(encoder); + kfree(intel_dig_port); + kfree(dp_connector); + return; + } + + if (intel_encoder->type != INTEL_OUTPUT_EDP) { + hdmi_connector = kzalloc(sizeof(struct intel_connector), + GFP_KERNEL); + if (!hdmi_connector) { + return; + } + + intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port); intel_hdmi_init_connector(intel_dig_port, hdmi_connector); - intel_dp_init_connector(intel_dig_port, dp_connector); + } } |