diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_sdvo.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_sdvo.c | 94 |
1 files changed, 90 insertions, 4 deletions
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index 24a3dc99716c..82678d30ab06 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -462,14 +462,63 @@ static int intel_sdvo_get_pixel_multiplier(struct drm_display_mode *mode) } /** - * Don't check status code from this as it switches the bus back to the - * SDVO chips which defeats the purpose of doing a bus switch in the first - * place. + * Try to read the response after issuie the DDC switch command. But it + * is noted that we must do the action of reading response and issuing DDC + * switch command in one I2C transaction. Otherwise when we try to start + * another I2C transaction after issuing the DDC bus switch, it will be + * switched to the internal SDVO register. */ static void intel_sdvo_set_control_bus_switch(struct intel_output *intel_output, u8 target) { - intel_sdvo_write_cmd(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, &target, 1); + struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv; + u8 out_buf[2], cmd_buf[2], ret_value[2], ret; + struct i2c_msg msgs[] = { + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = 0, + .len = 2, + .buf = out_buf, + }, + /* the following two are to read the response */ + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = 0, + .len = 1, + .buf = cmd_buf, + }, + { + .addr = sdvo_priv->slave_addr >> 1, + .flags = I2C_M_RD, + .len = 1, + .buf = ret_value, + }, + }; + + intel_sdvo_debug_write(intel_output, SDVO_CMD_SET_CONTROL_BUS_SWITCH, + &target, 1); + /* write the DDC switch command argument */ + intel_sdvo_write_byte(intel_output, SDVO_I2C_ARG_0, target); + + out_buf[0] = SDVO_I2C_OPCODE; + out_buf[1] = SDVO_CMD_SET_CONTROL_BUS_SWITCH; + cmd_buf[0] = SDVO_I2C_CMD_STATUS; + cmd_buf[1] = 0; + ret_value[0] = 0; + ret_value[1] = 0; + + ret = i2c_transfer(intel_output->i2c_bus, msgs, 3); + if (ret != 3) { + /* failure in I2C transfer */ + DRM_DEBUG_KMS("I2c transfer returned %d\n", ret); + return; + } + if (ret_value[0] != SDVO_CMD_STATUS_SUCCESS) { + DRM_DEBUG_KMS("DDC switch command returns response %d\n", + ret_value[0]); + return; + } + return; } static bool intel_sdvo_set_target_input(struct intel_output *intel_output, bool target_0, bool target_1) @@ -1579,6 +1628,32 @@ intel_sdvo_hdmi_sink_detect(struct drm_connector *connector, u16 response) edid = drm_get_edid(&intel_output->base, intel_output->ddc_bus); + /* This is only applied to SDVO cards with multiple outputs */ + if (edid == NULL && intel_sdvo_multifunc_encoder(intel_output)) { + uint8_t saved_ddc, temp_ddc; + saved_ddc = sdvo_priv->ddc_bus; + temp_ddc = sdvo_priv->ddc_bus >> 1; + /* + * Don't use the 1 as the argument of DDC bus switch to get + * the EDID. It is used for SDVO SPD ROM. + */ + while(temp_ddc > 1) { + sdvo_priv->ddc_bus = temp_ddc; + edid = drm_get_edid(&intel_output->base, + intel_output->ddc_bus); + if (edid) { + /* + * When we can get the EDID, maybe it is the + * correct DDC bus. Update it. + */ + sdvo_priv->ddc_bus = temp_ddc; + break; + } + temp_ddc >>= 1; + } + if (edid == NULL) + sdvo_priv->ddc_bus = saved_ddc; + } /* when there is no edid and no monitor is connected with VGA * port, try to use the CRT ddc to read the EDID for DVI-connector */ @@ -2270,6 +2345,14 @@ intel_sdvo_output_setup(struct intel_output *intel_output, uint16_t flags) connector->connector_type = DRM_MODE_CONNECTOR_VGA; intel_output->clone_mask = (1 << INTEL_SDVO_NON_TV_CLONE_BIT) | (1 << INTEL_ANALOG_CLONE_BIT); + } else if (flags & SDVO_OUTPUT_CVBS0) { + + sdvo_priv->controlled_output = SDVO_OUTPUT_CVBS0; + encoder->encoder_type = DRM_MODE_ENCODER_TVDAC; + connector->connector_type = DRM_MODE_CONNECTOR_SVIDEO; + sdvo_priv->is_tv = true; + intel_output->needs_tv_clock = true; + intel_output->clone_mask = 1 << INTEL_SDVO_TV_CLONE_BIT; } else if (flags & SDVO_OUTPUT_LVDS0) { sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0; @@ -2662,6 +2745,7 @@ static void intel_sdvo_create_enhance_property(struct drm_connector *connector) bool intel_sdvo_init(struct drm_device *dev, int output_device) { + struct drm_i915_private *dev_priv = dev->dev_private; struct drm_connector *connector; struct intel_output *intel_output; struct intel_sdvo_priv *sdvo_priv; @@ -2708,10 +2792,12 @@ bool intel_sdvo_init(struct drm_device *dev, int output_device) intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS"); sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA, "SDVOB/VGA DDC BUS"); + dev_priv->hotplug_supported_mask |= SDVOB_HOTPLUG_INT_STATUS; } else { intel_output->ddc_bus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS"); sdvo_priv->analog_ddc_bus = intel_i2c_create(dev, GPIOA, "SDVOC/VGA DDC BUS"); + dev_priv->hotplug_supported_mask |= SDVOC_HOTPLUG_INT_STATUS; } if (intel_output->ddc_bus == NULL) |