diff options
Diffstat (limited to 'drivers/gpu/drm/i915')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_dma.c | 20 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_drv.c | 17 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_drv.h | 4 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_gem.c | 101 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_gem_dmabuf.c | 8 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 14 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_ddi.c | 10 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 159 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_dp.c | 5 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_drv.h | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_hdmi.c | 19 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_lvds.c | 12 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_panel.c | 24 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_pm.c | 65 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_ringbuffer.c | 50 |
15 files changed, 353 insertions, 157 deletions
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index adb319b53ecd..f4669802a0fb 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1495,6 +1495,15 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->dev = dev; dev_priv->info = info; + spin_lock_init(&dev_priv->irq_lock); + spin_lock_init(&dev_priv->gpu_error.lock); + spin_lock_init(&dev_priv->rps.lock); + spin_lock_init(&dev_priv->gt_lock); + spin_lock_init(&dev_priv->backlight.lock); + mutex_init(&dev_priv->dpio_lock); + mutex_init(&dev_priv->rps.hw_lock); + mutex_init(&dev_priv->modeset_restore_lock); + i915_dump_device_info(dev_priv); if (i915_get_bridge_dev(dev)) { @@ -1585,6 +1594,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) intel_detect_pch(dev); intel_irq_init(dev); + intel_pm_init(dev); + intel_gt_sanitize(dev); intel_gt_init(dev); /* Try to make sure MCHBAR is enabled before poking at it */ @@ -1610,15 +1621,6 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (!IS_I945G(dev) && !IS_I945GM(dev)) pci_enable_msi(dev->pdev); - spin_lock_init(&dev_priv->irq_lock); - spin_lock_init(&dev_priv->gpu_error.lock); - spin_lock_init(&dev_priv->rps.lock); - spin_lock_init(&dev_priv->backlight.lock); - mutex_init(&dev_priv->dpio_lock); - - mutex_init(&dev_priv->rps.hw_lock); - mutex_init(&dev_priv->modeset_restore_lock); - dev_priv->num_plane = 1; if (IS_VALLEYVIEW(dev)) dev_priv->num_plane = 2; diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 062cbda1bf4a..45b3c030f483 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -123,10 +123,10 @@ module_param_named(preliminary_hw_support, i915_preliminary_hw_support, int, 060 MODULE_PARM_DESC(preliminary_hw_support, "Enable preliminary hardware support. (default: false)"); -int i915_disable_power_well __read_mostly = 0; +int i915_disable_power_well __read_mostly = 1; module_param_named(disable_power_well, i915_disable_power_well, int, 0600); MODULE_PARM_DESC(disable_power_well, - "Disable the power well when possible (default: false)"); + "Disable the power well when possible (default: true)"); int i915_enable_ips __read_mostly = 1; module_param_named(enable_ips, i915_enable_ips, int, 0600); @@ -706,7 +706,7 @@ static int i915_drm_thaw(struct drm_device *dev) { int error = 0; - intel_gt_reset(dev); + intel_gt_sanitize(dev); if (drm_core_check_feature(dev, DRIVER_MODESET)) { mutex_lock(&dev->struct_mutex); @@ -732,7 +732,7 @@ int i915_resume(struct drm_device *dev) pci_set_master(dev->pdev); - intel_gt_reset(dev); + intel_gt_sanitize(dev); /* * Platforms with opregion should have sane BIOS, older ones (gen3 and @@ -1253,21 +1253,21 @@ hsw_unclaimed_reg_check(struct drm_i915_private *dev_priv, u32 reg) #define __i915_read(x, y) \ u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \ + unsigned long irqflags; \ u##x val = 0; \ + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \ if (IS_GEN5(dev_priv->dev)) \ ilk_dummy_write(dev_priv); \ if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \ - unsigned long irqflags; \ - spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \ if (dev_priv->forcewake_count == 0) \ dev_priv->gt.force_wake_get(dev_priv); \ val = read##y(dev_priv->regs + reg); \ if (dev_priv->forcewake_count == 0) \ dev_priv->gt.force_wake_put(dev_priv); \ - spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \ } else { \ val = read##y(dev_priv->regs + reg); \ } \ + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \ trace_i915_reg_rw(false, reg, val, sizeof(val)); \ return val; \ } @@ -1280,8 +1280,10 @@ __i915_read(64, q) #define __i915_write(x, y) \ void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \ + unsigned long irqflags; \ u32 __fifo_ret = 0; \ trace_i915_reg_rw(true, reg, val, sizeof(val)); \ + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \ if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \ __fifo_ret = __gen6_gt_wait_for_fifo(dev_priv); \ } \ @@ -1293,6 +1295,7 @@ void i915_write##x(struct drm_i915_private *dev_priv, u32 reg, u##x val) { \ gen6_gt_check_fifodbg(dev_priv); \ } \ hsw_unclaimed_reg_check(dev_priv, reg); \ + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \ } __i915_write(8, b) __i915_write(16, w) diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index a416645bcd23..1929bffc1c77 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -555,6 +555,7 @@ enum intel_sbi_destination { #define QUIRK_PIPEA_FORCE (1<<0) #define QUIRK_LVDS_SSC_DISABLE (1<<1) #define QUIRK_INVERT_BRIGHTNESS (1<<2) +#define QUIRK_NO_PCH_PWM_ENABLE (1<<3) struct intel_fbdev; struct intel_fbc_work; @@ -1581,9 +1582,10 @@ void i915_hangcheck_elapsed(unsigned long data); void i915_handle_error(struct drm_device *dev, bool wedged); extern void intel_irq_init(struct drm_device *dev); +extern void intel_pm_init(struct drm_device *dev); extern void intel_hpd_init(struct drm_device *dev); extern void intel_gt_init(struct drm_device *dev); -extern void intel_gt_reset(struct drm_device *dev); +extern void intel_gt_sanitize(struct drm_device *dev); void i915_error_state_free(struct kref *error_ref); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 4200c32407ec..d9e2208cfe98 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1880,6 +1880,10 @@ i915_gem_object_move_to_active(struct drm_i915_gem_object *obj, u32 seqno = intel_ring_get_seqno(ring); BUG_ON(ring == NULL); + if (obj->ring != ring && obj->last_write_seqno) { + /* Keep the seqno relative to the current ring */ + obj->last_write_seqno = seqno; + } obj->ring = ring; /* Add a reference if we're newly entering the active list. */ @@ -2254,7 +2258,17 @@ void i915_gem_restore_fences(struct drm_device *dev) for (i = 0; i < dev_priv->num_fence_regs; i++) { struct drm_i915_fence_reg *reg = &dev_priv->fence_regs[i]; - i915_gem_write_fence(dev, i, reg->obj); + + /* + * Commit delayed tiling changes if we have an object still + * attached to the fence, otherwise just clear the fence. + */ + if (reg->obj) { + i915_gem_object_update_fence(reg->obj, reg, + reg->obj->tiling_mode); + } else { + i915_gem_write_fence(dev, i, NULL); + } } } @@ -2653,7 +2667,6 @@ static void i965_write_fence_reg(struct drm_device *dev, int reg, drm_i915_private_t *dev_priv = dev->dev_private; int fence_reg; int fence_pitch_shift; - uint64_t val; if (INTEL_INFO(dev)->gen >= 6) { fence_reg = FENCE_REG_SANDYBRIDGE_0; @@ -2663,8 +2676,23 @@ static void i965_write_fence_reg(struct drm_device *dev, int reg, fence_pitch_shift = I965_FENCE_PITCH_SHIFT; } + fence_reg += reg * 8; + + /* To w/a incoherency with non-atomic 64-bit register updates, + * we split the 64-bit update into two 32-bit writes. In order + * for a partial fence not to be evaluated between writes, we + * precede the update with write to turn off the fence register, + * and only enable the fence as the last step. + * + * For extra levels of paranoia, we make sure each step lands + * before applying the next step. + */ + I915_WRITE(fence_reg, 0); + POSTING_READ(fence_reg); + if (obj) { u32 size = obj->gtt_space->size; + uint64_t val; val = (uint64_t)((obj->gtt_offset + size - 4096) & 0xfffff000) << 32; @@ -2673,12 +2701,16 @@ static void i965_write_fence_reg(struct drm_device *dev, int reg, if (obj->tiling_mode == I915_TILING_Y) val |= 1 << I965_FENCE_TILING_Y_SHIFT; val |= I965_FENCE_REG_VALID; - } else - val = 0; - fence_reg += reg * 8; - I915_WRITE64(fence_reg, val); - POSTING_READ(fence_reg); + I915_WRITE(fence_reg + 4, val >> 32); + POSTING_READ(fence_reg + 4); + + I915_WRITE(fence_reg + 0, val); + POSTING_READ(fence_reg); + } else { + I915_WRITE(fence_reg + 4, 0); + POSTING_READ(fence_reg + 4); + } } static void i915_write_fence_reg(struct drm_device *dev, int reg, @@ -2773,6 +2805,10 @@ static void i915_gem_write_fence(struct drm_device *dev, int reg, if (i915_gem_object_needs_mb(dev_priv->fence_regs[reg].obj)) mb(); + WARN(obj && (!obj->stride || !obj->tiling_mode), + "bogus fence setup with stride: 0x%x, tiling mode: %i\n", + obj->stride, obj->tiling_mode); + switch (INTEL_INFO(dev)->gen) { case 7: case 6: @@ -2796,56 +2832,17 @@ static inline int fence_number(struct drm_i915_private *dev_priv, return fence - dev_priv->fence_regs; } -struct write_fence { - struct drm_device *dev; - struct drm_i915_gem_object *obj; - int fence; -}; - -static void i915_gem_write_fence__ipi(void *data) -{ - struct write_fence *args = data; - - /* Required for SNB+ with LLC */ - wbinvd(); - - /* Required for VLV */ - i915_gem_write_fence(args->dev, args->fence, args->obj); -} - static void i915_gem_object_update_fence(struct drm_i915_gem_object *obj, struct drm_i915_fence_reg *fence, bool enable) { struct drm_i915_private *dev_priv = obj->base.dev->dev_private; - struct write_fence args = { - .dev = obj->base.dev, - .fence = fence_number(dev_priv, fence), - .obj = enable ? obj : NULL, - }; - - /* In order to fully serialize access to the fenced region and - * the update to the fence register we need to take extreme - * measures on SNB+. In theory, the write to the fence register - * flushes all memory transactions before, and coupled with the - * mb() placed around the register write we serialise all memory - * operations with respect to the changes in the tiler. Yet, on - * SNB+ we need to take a step further and emit an explicit wbinvd() - * on each processor in order to manually flush all memory - * transactions before updating the fence register. - * - * However, Valleyview complicates matter. There the wbinvd is - * insufficient and unlike SNB/IVB requires the serialising - * register write. (Note that that register write by itself is - * conversely not sufficient for SNB+.) To compromise, we do both. - */ - if (INTEL_INFO(args.dev)->gen >= 6) - on_each_cpu(i915_gem_write_fence__ipi, &args, 1); - else - i915_gem_write_fence(args.dev, args.fence, args.obj); + int reg = fence_number(dev_priv, fence); + + i915_gem_write_fence(obj->base.dev, reg, enable ? obj : NULL); if (enable) { - obj->fence_reg = args.fence; + obj->fence_reg = reg; fence->obj = obj; list_move_tail(&fence->lru_list, &dev_priv->mm.fence_list); } else { @@ -2853,6 +2850,7 @@ static void i915_gem_object_update_fence(struct drm_i915_gem_object *obj, fence->obj = NULL; list_del_init(&fence->lru_list); } + obj->fence_dirty = false; } static int @@ -2982,7 +2980,6 @@ i915_gem_object_get_fence(struct drm_i915_gem_object *obj) return 0; i915_gem_object_update_fence(obj, reg, enable); - obj->fence_dirty = false; return 0; } @@ -4611,7 +4608,7 @@ i915_gem_inactive_shrink(struct shrinker *shrinker, struct shrink_control *sc) list_for_each_entry(obj, &dev_priv->mm.unbound_list, global_list) if (obj->pages_pin_count == 0) cnt += obj->base.size >> PAGE_SHIFT; - list_for_each_entry(obj, &dev_priv->mm.inactive_list, global_list) + list_for_each_entry(obj, &dev_priv->mm.inactive_list, mm_list) if (obj->pin_count == 0 && obj->pages_pin_count == 0) cnt += obj->base.size >> PAGE_SHIFT; diff --git a/drivers/gpu/drm/i915/i915_gem_dmabuf.c b/drivers/gpu/drm/i915/i915_gem_dmabuf.c index dc53a527126b..9e6578330801 100644 --- a/drivers/gpu/drm/i915/i915_gem_dmabuf.c +++ b/drivers/gpu/drm/i915/i915_gem_dmabuf.c @@ -85,9 +85,17 @@ static void i915_gem_unmap_dma_buf(struct dma_buf_attachment *attachment, struct sg_table *sg, enum dma_data_direction dir) { + struct drm_i915_gem_object *obj = attachment->dmabuf->priv; + + mutex_lock(&obj->base.dev->struct_mutex); + dma_unmap_sg(attachment->dev, sg->sgl, sg->nents, dir); sg_free_table(sg); kfree(sg); + + i915_gem_object_unpin_pages(obj); + + mutex_unlock(&obj->base.dev->struct_mutex); } static void i915_gem_dmabuf_release(struct dma_buf *dma_buf) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f2326fc60ac9..53cddd985406 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -752,6 +752,8 @@ will not assert AGPBUSY# and will only be delivered when out of C3. */ #define INSTPM_FORCE_ORDERING (1<<7) /* GEN6+ */ +#define INSTPM_TLB_INVALIDATE (1<<9) +#define INSTPM_SYNC_FLUSH (1<<5) #define ACTHD 0x020c8 #define FW_BLC 0x020d8 #define FW_BLC2 0x020dc @@ -1856,10 +1858,16 @@ #define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) #define PORT_HOTPLUG_STAT (dev_priv->info->display_mmio_offset + 0x61114) -/* HDMI/DP bits are gen4+ */ -#define PORTB_HOTPLUG_LIVE_STATUS (1 << 29) +/* + * HDMI/DP bits are gen4+ + * + * WARNING: Bspec for hpd status bits on gen4 seems to be completely confused. + * Please check the detailed lore in the commit message for for experimental + * evidence. + */ +#define PORTD_HOTPLUG_LIVE_STATUS (1 << 29) #define PORTC_HOTPLUG_LIVE_STATUS (1 << 28) -#define PORTD_HOTPLUG_LIVE_STATUS (1 << 27) +#define PORTB_HOTPLUG_LIVE_STATUS (1 << 27) #define PORTD_HOTPLUG_INT_STATUS (3 << 21) #define PORTC_HOTPLUG_INT_STATUS (3 << 19) #define PORTB_HOTPLUG_INT_STATUS (3 << 17) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 324211ac9c55..b042ee5c4070 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -301,7 +301,7 @@ static void intel_ddi_mode_set(struct drm_encoder *encoder, struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder); - intel_dp->DP = intel_dig_port->port_reversal | + intel_dp->DP = intel_dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE | DDI_BUF_EMP_400MV_0DB_HSW; intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count); @@ -1109,7 +1109,8 @@ static void intel_enable_ddi(struct intel_encoder *intel_encoder) * enabling the port. */ I915_WRITE(DDI_BUF_CTL(port), - intel_dig_port->port_reversal | DDI_BUF_CTL_ENABLE); + intel_dig_port->saved_port_bits | + DDI_BUF_CTL_ENABLE); } else if (type == INTEL_OUTPUT_EDP) { struct intel_dp *intel_dp = enc_to_intel_dp(encoder); @@ -1347,8 +1348,9 @@ void intel_ddi_init(struct drm_device *dev, enum port port) intel_encoder->get_config = intel_ddi_get_config; intel_dig_port->port = port; - intel_dig_port->port_reversal = I915_READ(DDI_BUF_CTL(port)) & - DDI_BUF_PORT_REVERSAL; + intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) & + (DDI_BUF_PORT_REVERSAL | + DDI_A_4_LANES); intel_dig_port->dp.output_reg = DDI_BUF_CTL(port); intel_encoder->type = INTEL_OUTPUT_UNKNOWN; diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 85f3eb74d2b7..be79f477a38f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4913,22 +4913,19 @@ static void i9xx_get_pfit_config(struct intel_crtc *crtc, uint32_t tmp; tmp = I915_READ(PFIT_CONTROL); + if (!(tmp & PFIT_ENABLE)) + return; + /* Check whether the pfit is attached to our pipe. */ if (INTEL_INFO(dev)->gen < 4) { if (crtc->pipe != PIPE_B) return; - - /* gen2/3 store dither state in pfit control, needs to match */ - pipe_config->gmch_pfit.control = tmp & PANEL_8TO6_DITHER_ENABLE; } else { if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT)) return; } - if (!(tmp & PFIT_ENABLE)) - return; - - pipe_config->gmch_pfit.control = I915_READ(PFIT_CONTROL); + pipe_config->gmch_pfit.control = tmp; pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS); if (INTEL_INFO(dev)->gen < 5) pipe_config->gmch_pfit.lvds_border_bits = @@ -8272,9 +8269,11 @@ check_crtc_state(struct drm_device *dev) list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { + enum pipe pipe; if (encoder->base.crtc != &crtc->base) continue; - if (encoder->get_config) + if (encoder->get_config && + encoder->get_hw_state(encoder, &pipe)) encoder->get_config(encoder, &pipe_config); } @@ -8317,6 +8316,8 @@ check_shared_dpll_state(struct drm_device *dev) pll->active, pll->refcount); WARN(pll->active && !pll->on, "pll in active use but not on in sw tracking\n"); + WARN(pll->on && !pll->active, + "pll in on but not on in use in sw tracking\n"); WARN(pll->on != active, "pll on state mismatch (expected %i, found %i)\n", pll->on, active); @@ -8541,15 +8542,20 @@ static void intel_set_config_restore_state(struct drm_device *dev, } static bool -is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors, - int num_connectors) +is_crtc_connector_off(struct drm_mode_set *set) { int i; - for (i = 0; i < num_connectors; i++) - if (connectors[i].encoder && - connectors[i].encoder->crtc == crtc && - connectors[i].dpms != DRM_MODE_DPMS_ON) + if (set->num_connectors == 0) + return false; + + if (WARN_ON(set->connectors == NULL)) + return false; + + for (i = 0; i < set->num_connectors; i++) + if (set->connectors[i]->encoder && + set->connectors[i]->encoder->crtc == set->crtc && + set->connectors[i]->dpms != DRM_MODE_DPMS_ON) return true; return false; @@ -8562,10 +8568,8 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ - if (set->connectors != NULL && - is_crtc_connector_off(set->crtc, *set->connectors, - set->num_connectors)) { - config->mode_changed = true; + if (is_crtc_connector_off(set)) { + config->mode_changed = true; } else if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ if (set->crtc->fb == NULL) { @@ -9398,6 +9402,17 @@ static void quirk_invert_brightness(struct drm_device *dev) DRM_INFO("applying inverted panel brightness quirk\n"); } +/* + * Some machines (Dell XPS13) suffer broken backlight controls if + * BLM_PCH_PWM_ENABLE is set. + */ +static void quirk_no_pcm_pwm_enable(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + dev_priv->quirks |= QUIRK_NO_PCH_PWM_ENABLE; + DRM_INFO("applying no-PCH_PWM_ENABLE quirk\n"); +} + struct intel_quirk { int device; int subsystem_vendor; @@ -9467,6 +9482,11 @@ static struct intel_quirk intel_quirks[] = { /* Acer Aspire 4736Z */ { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness }, + + /* Dell XPS13 HD Sandy Bridge */ + { 0x0116, 0x1028, 0x052e, quirk_no_pcm_pwm_enable }, + /* Dell XPS13 HD and XPS13 FHD Ivy Bridge */ + { 0x0166, 0x1028, 0x058b, quirk_no_pcm_pwm_enable }, }; static void intel_init_quirks(struct drm_device *dev) @@ -9817,8 +9837,8 @@ static void intel_modeset_readout_hw_state(struct drm_device *dev) } pll->refcount = pll->active; - DRM_DEBUG_KMS("%s hw state readout: refcount %i\n", - pll->name, pll->refcount); + DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n", + pll->name, pll->refcount, pll->on); } list_for_each_entry(encoder, &dev->mode_config.encoder_list, @@ -9869,6 +9889,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, struct drm_plane *plane; struct intel_crtc *crtc; struct intel_encoder *encoder; + int i; intel_modeset_readout_hw_state(dev); @@ -9884,6 +9905,18 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]"); } + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; + + if (!pll->on || pll->active) + continue; + + DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name); + + pll->disable(dev_priv, pll); + pll->on = false; + } + if (force_restore) { /* * We need to use raw interfaces for restoring state to avoid @@ -10009,6 +10042,8 @@ struct intel_display_error_state { u32 power_well_driver; + int num_transcoders; + struct intel_cursor_error_state { u32 control; u32 position; @@ -10017,16 +10052,7 @@ struct intel_display_error_state { } cursor[I915_MAX_PIPES]; struct intel_pipe_error_state { - enum transcoder cpu_transcoder; - u32 conf; u32 source; - - u32 htotal; - u32 hblank; - u32 hsync; - u32 vtotal; - u32 vblank; - u32 vsync; } pipe[I915_MAX_PIPES]; struct intel_plane_error_state { @@ -10038,6 +10064,19 @@ struct intel_display_error_state { u32 surface; u32 tile_offset; } plane[I915_MAX_PIPES]; + + struct intel_transcoder_error_state { + enum transcoder cpu_transcoder; + + u32 conf; + + u32 htotal; + u32 hblank; + u32 hsync; + u32 vtotal; + u32 vblank; + u32 vsync; + } transcoder[4]; }; struct intel_display_error_state * @@ -10045,9 +10084,17 @@ intel_display_capture_error_state(struct drm_device *dev) { drm_i915_private_t *dev_priv = dev->dev_private; struct intel_display_error_state *error; - enum transcoder cpu_transcoder; + int transcoders[] = { + TRANSCODER_A, + TRANSCODER_B, + TRANSCODER_C, + TRANSCODER_EDP, + }; int i; + if (INTEL_INFO(dev)->num_pipes == 0) + return NULL; + error = kmalloc(sizeof(*error), GFP_ATOMIC); if (error == NULL) return NULL; @@ -10056,9 +10103,6 @@ intel_display_capture_error_state(struct drm_device *dev) error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER); for_each_pipe(i) { - cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i); - error->pipe[i].cpu_transcoder = cpu_transcoder; - if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) { error->cursor[i].control = I915_READ(CURCNTR(i)); error->cursor[i].position = I915_READ(CURPOS(i)); @@ -10082,14 +10126,25 @@ intel_display_capture_error_state(struct drm_device *dev) error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i)); } - error->pipe[i].conf = I915_READ(PIPECONF(cpu_transcoder)); error->pipe[i].source = I915_READ(PIPESRC(i)); - error->pipe[i].htotal = I915_READ(HTOTAL(cpu_transcoder)); - error->pipe[i].hblank = I915_READ(HBLANK(cpu_transcoder)); - error->pipe[i].hsync = I915_READ(HSYNC(cpu_transcoder)); - error->pipe[i].vtotal = I915_READ(VTOTAL(cpu_transcoder)); - error->pipe[i].vblank = I915_READ(VBLANK(cpu_transcoder)); - error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder)); + } + + error->num_transcoders = INTEL_INFO(dev)->num_pipes; + if (HAS_DDI(dev_priv->dev)) + error->num_transcoders++; /* Account for eDP. */ + + for (i = 0; i < error->num_transcoders; i++) { + enum transcoder cpu_transcoder = transcoders[i]; + + error->transcoder[i].cpu_transcoder = cpu_transcoder; + + error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder)); + error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder)); + error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder)); + error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder)); + error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder)); + error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder)); + error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder)); } /* In the code above we read the registers without checking if the power @@ -10111,22 +10166,16 @@ intel_display_print_error_state(struct drm_i915_error_state_buf *m, { int i; + if (!error) + return; + err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes); if (HAS_POWER_WELL(dev)) err_printf(m, "PWR_WELL_CTL2: %08x\n", error->power_well_driver); for_each_pipe(i) { err_printf(m, "Pipe [%d]:\n", i); - err_printf(m, " CPU transcoder: %c\n", - transcoder_name(error->pipe[i].cpu_transcoder)); - err_printf(m, " CONF: %08x\n", error->pipe[i].conf); err_printf(m, " SRC: %08x\n", error->pipe[i].source); - err_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal); - err_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank); - err_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync); - err_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal); - err_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank); - err_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync); err_printf(m, "Plane [%d]:\n", i); err_printf(m, " CNTR: %08x\n", error->plane[i].control); @@ -10147,5 +10196,17 @@ intel_display_print_error_state(struct drm_i915_error_state_buf *m, err_printf(m, " POS: %08x\n", error->cursor[i].position); err_printf(m, " BASE: %08x\n", error->cursor[i].base); } + + for (i = 0; i < error->num_transcoders; i++) { + err_printf(m, " CPU transcoder: %c\n", + transcoder_name(error->transcoder[i].cpu_transcoder)); + err_printf(m, " CONF: %08x\n", error->transcoder[i].conf); + err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal); + err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank); + err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync); + err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal); + err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank); + err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync); + } } #endif diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index b73971234013..26e162bb3a51 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -75,7 +75,12 @@ intel_dp_max_link_bw(struct intel_dp *intel_dp) case DP_LINK_BW_1_62: case DP_LINK_BW_2_7: break; + case DP_LINK_BW_5_4: /* 1.2 capable displays may advertise higher bw */ + max_link_bw = DP_LINK_BW_2_7; + break; default: + WARN(1, "invalid max DP link bw val %x, using 1.62Gbps\n", + max_link_bw); max_link_bw = DP_LINK_BW_1_62; break; } diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h index c8c9b6f48230..b7d6e09456ce 100644 --- a/drivers/gpu/drm/i915/intel_drv.h +++ b/drivers/gpu/drm/i915/intel_drv.h @@ -504,7 +504,7 @@ struct intel_dp { struct intel_digital_port { struct intel_encoder base; enum port port; - u32 port_reversal; + u32 saved_port_bits; struct intel_dp dp; struct intel_hdmi hdmi; }; diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 98df2a0c85bd..2fd3fd5b943e 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -785,10 +785,22 @@ static void intel_disable_hdmi(struct intel_encoder *encoder) } } +static int hdmi_portclock_limit(struct intel_hdmi *hdmi) +{ + struct drm_device *dev = intel_hdmi_to_dev(hdmi); + + if (IS_G4X(dev)) + return 165000; + else if (IS_HASWELL(dev)) + return 300000; + else + return 225000; +} + static int intel_hdmi_mode_valid(struct drm_connector *connector, struct drm_display_mode *mode) { - if (mode->clock > 165000) + if (mode->clock > hdmi_portclock_limit(intel_attached_hdmi(connector))) return MODE_CLOCK_HIGH; if (mode->clock < 20000) return MODE_CLOCK_LOW; @@ -806,6 +818,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, struct drm_device *dev = encoder->base.dev; struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; int clock_12bpc = pipe_config->requested_mode.clock * 3 / 2; + int portclock_limit = hdmi_portclock_limit(intel_hdmi); int desired_bpp; if (intel_hdmi->color_range_auto) { @@ -829,7 +842,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, * outputs. We also need to check that the higher clock still fits * within limits. */ - if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= 225000 + if (pipe_config->pipe_bpp > 8*3 && clock_12bpc <= portclock_limit && HAS_PCH_SPLIT(dev)) { DRM_DEBUG_KMS("picking bpc to 12 for HDMI output\n"); desired_bpp = 12*3; @@ -846,7 +859,7 @@ bool intel_hdmi_compute_config(struct intel_encoder *encoder, pipe_config->pipe_bpp = desired_bpp; } - if (adjusted_mode->clock > 225000) { + if (adjusted_mode->clock > portclock_limit) { DRM_DEBUG_KMS("too high HDMI clock, rejecting mode\n"); return false; } diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 021e8daa022d..61348eae2f04 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -109,6 +109,13 @@ static void intel_lvds_get_config(struct intel_encoder *encoder, flags |= DRM_MODE_FLAG_PVSYNC; pipe_config->adjusted_mode.flags |= flags; + + /* gen2/3 store dither state in pfit control, needs to match */ + if (INTEL_INFO(dev)->gen < 4) { + tmp = I915_READ(PFIT_CONTROL); + + pipe_config->gmch_pfit.control |= tmp & PANEL_8TO6_DITHER_ENABLE; + } } /* The LVDS pin pair needs to be on before the DPLLs are enabled. @@ -290,14 +297,11 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder, intel_pch_panel_fitting(intel_crtc, pipe_config, intel_connector->panel.fitting_mode); - return true; } else { intel_gmch_panel_fitting(intel_crtc, pipe_config, intel_connector->panel.fitting_mode); - } - drm_mode_set_crtcinfo(adjusted_mode, 0); - pipe_config->timings_set = true; + } /* * XXX: It would be nice to support lower refresh rates on the diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 80bea1d3209f..5950888ae1d0 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -194,6 +194,9 @@ void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc, adjusted_mode->vdisplay == mode->vdisplay) goto out; + drm_mode_set_crtcinfo(adjusted_mode, 0); + pipe_config->timings_set = true; + switch (fitting_mode) { case DRM_MODE_SCALE_CENTER: /* @@ -494,8 +497,11 @@ void intel_panel_set_backlight(struct drm_device *dev, u32 level, u32 max) goto out; } - /* scale to hardware */ - level = level * freq / max; + /* scale to hardware, but be careful to not overflow */ + if (freq < max) + level = level * freq / max; + else + level = freq / max * level; dev_priv->backlight.level = level; if (dev_priv->backlight.device) @@ -512,6 +518,17 @@ void intel_panel_disable_backlight(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; unsigned long flags; + /* + * Do not disable backlight on the vgaswitcheroo path. When switching + * away from i915, the other client may depend on i915 to handle the + * backlight. This will leave the backlight on unnecessarily when + * another client is not activated. + */ + if (dev->switch_power_state == DRM_SWITCH_POWER_CHANGING) { + DRM_DEBUG_DRIVER("Skipping backlight disable on vga switch\n"); + return; + } + spin_lock_irqsave(&dev_priv->backlight.lock, flags); dev_priv->backlight.enabled = false; @@ -580,7 +597,8 @@ void intel_panel_enable_backlight(struct drm_device *dev, POSTING_READ(reg); I915_WRITE(reg, tmp | BLM_PWM_ENABLE); - if (HAS_PCH_SPLIT(dev)) { + if (HAS_PCH_SPLIT(dev) && + !(dev_priv->quirks & QUIRK_NO_PCH_PWM_ENABLE)) { tmp = I915_READ(BLC_PWM_PCH_CTL1); tmp |= BLM_PCH_PWM_ENABLE; tmp &= ~BLM_PCH_OVERRIDE_ENABLE; diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index ccbdd83f5220..b0e4a0bd1313 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -5063,8 +5063,26 @@ static void __intel_set_power_well(struct drm_device *dev, bool enable) } } else { if (enable_requested) { + unsigned long irqflags; + enum pipe p; + I915_WRITE(HSW_PWR_WELL_DRIVER, 0); + POSTING_READ(HSW_PWR_WELL_DRIVER); DRM_DEBUG_KMS("Requesting to disable the power well\n"); + + /* + * After this, the registers on the pipes that are part + * of the power well will become zero, so we have to + * adjust our counters according to that. + * + * FIXME: Should we do this in general in + * drm_vblank_post_modeset? + */ + spin_lock_irqsave(&dev->vbl_lock, irqflags); + for_each_pipe(p) + if (p != PIPE_A) + dev->last_vblank[p] = 0; + spin_unlock_irqrestore(&dev->vbl_lock, irqflags); } } } @@ -5476,7 +5494,7 @@ static void vlv_force_wake_put(struct drm_i915_private *dev_priv) gen6_gt_check_fifodbg(dev_priv); } -void intel_gt_reset(struct drm_device *dev) +void intel_gt_sanitize(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -5487,26 +5505,61 @@ void intel_gt_reset(struct drm_device *dev) if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) __gen6_gt_force_wake_mt_reset(dev_priv); } + + /* BIOS often leaves RC6 enabled, but disable it for hw init */ + if (INTEL_INFO(dev)->gen >= 6) + intel_disable_gt_powersave(dev); } void intel_gt_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; - spin_lock_init(&dev_priv->gt_lock); - - intel_gt_reset(dev); - if (IS_VALLEYVIEW(dev)) { dev_priv->gt.force_wake_get = vlv_force_wake_get; dev_priv->gt.force_wake_put = vlv_force_wake_put; - } else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) { + } else if (IS_HASWELL(dev)) { dev_priv->gt.force_wake_get = __gen6_gt_force_wake_mt_get; dev_priv->gt.force_wake_put = __gen6_gt_force_wake_mt_put; + } else if (IS_IVYBRIDGE(dev)) { + u32 ecobus; + + /* IVB configs may use multi-threaded forcewake */ + + /* A small trick here - if the bios hasn't configured + * MT forcewake, and if the device is in RC6, then + * force_wake_mt_get will not wake the device and the + * ECOBUS read will return zero. Which will be + * (correctly) interpreted by the test below as MT + * forcewake being disabled. + */ + mutex_lock(&dev->struct_mutex); + __gen6_gt_force_wake_mt_get(dev_priv); + ecobus = I915_READ_NOTRACE(ECOBUS); + __gen6_gt_force_wake_mt_put(dev_priv); + mutex_unlock(&dev->struct_mutex); + + if (ecobus & FORCEWAKE_MT_ENABLE) { + dev_priv->gt.force_wake_get = + __gen6_gt_force_wake_mt_get; + dev_priv->gt.force_wake_put = + __gen6_gt_force_wake_mt_put; + } else { + DRM_INFO("No MT forcewake available on Ivybridge, this can result in issues\n"); + DRM_INFO("when using vblank-synced partial screen updates.\n"); + dev_priv->gt.force_wake_get = __gen6_gt_force_wake_get; + dev_priv->gt.force_wake_put = __gen6_gt_force_wake_put; + } } else if (IS_GEN6(dev)) { dev_priv->gt.force_wake_get = __gen6_gt_force_wake_get; dev_priv->gt.force_wake_put = __gen6_gt_force_wake_put; } +} + +void intel_pm_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + INIT_DELAYED_WORK(&dev_priv->rps.delayed_resume_work, intel_gen6_powersave_work); } diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index e51ab552046c..079ef0129e74 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -379,6 +379,17 @@ u32 intel_ring_get_active_head(struct intel_ring_buffer *ring) return I915_READ(acthd_reg); } +static void ring_setup_phys_status_page(struct intel_ring_buffer *ring) +{ + struct drm_i915_private *dev_priv = ring->dev->dev_private; + u32 addr; + + addr = dev_priv->status_page_dmah->busaddr; + if (INTEL_INFO(ring->dev)->gen >= 4) + addr |= (dev_priv->status_page_dmah->busaddr >> 28) & 0xf0; + I915_WRITE(HWS_PGA, addr); +} + static int init_ring_common(struct intel_ring_buffer *ring) { struct drm_device *dev = ring->dev; @@ -390,6 +401,11 @@ static int init_ring_common(struct intel_ring_buffer *ring) if (HAS_FORCE_WAKE(dev)) gen6_gt_force_wake_get(dev_priv); + if (I915_NEED_GFX_HWS(dev)) + intel_ring_setup_status_page(ring); + else + ring_setup_phys_status_page(ring); + /* Stop the ring if it's running. */ I915_WRITE_CTL(ring, 0); I915_WRITE_HEAD(ring, 0); @@ -518,9 +534,6 @@ cleanup_pipe_control(struct intel_ring_buffer *ring) struct pipe_control *pc = ring->private; struct drm_i915_gem_object *obj; - if (!ring->private) - return; - obj = pc->obj; kunmap(sg_page(obj->pages->sgl)); @@ -528,7 +541,6 @@ cleanup_pipe_control(struct intel_ring_buffer *ring) drm_gem_object_unreference(&obj->base); kfree(pc); - ring->private = NULL; } static int init_render_ring(struct intel_ring_buffer *ring) @@ -601,7 +613,10 @@ static void render_ring_cleanup(struct intel_ring_buffer *ring) if (HAS_BROKEN_CS_TLB(dev)) drm_gem_object_unreference(to_gem_object(ring->private)); - cleanup_pipe_control(ring); + if (INTEL_INFO(dev)->gen >= 5) + cleanup_pipe_control(ring); + + ring->private = NULL; } static void @@ -953,6 +968,18 @@ void intel_ring_setup_status_page(struct intel_ring_buffer *ring) I915_WRITE(mmio, (u32)ring->status_page.gfx_addr); POSTING_READ(mmio); + + /* Flush the TLB for this page */ + if (INTEL_INFO(dev)->gen >= 6) { + u32 reg = RING_INSTPM(ring->mmio_base); + I915_WRITE(reg, + _MASKED_BIT_ENABLE(INSTPM_TLB_INVALIDATE | + INSTPM_SYNC_FLUSH)); + if (wait_for((I915_READ(reg) & INSTPM_SYNC_FLUSH) == 0, + 1000)) + DRM_ERROR("%s: wait for SyncFlush to complete for TLB invalidation timed out\n", + ring->name); + } } static int @@ -1223,7 +1250,6 @@ static int init_status_page(struct intel_ring_buffer *ring) ring->status_page.obj = obj; memset(ring->status_page.page_addr, 0, PAGE_SIZE); - intel_ring_setup_status_page(ring); DRM_DEBUG_DRIVER("%s hws offset: 0x%08x\n", ring->name, ring->status_page.gfx_addr); @@ -1237,10 +1263,9 @@ err: return ret; } -static int init_phys_hws_pga(struct intel_ring_buffer *ring) +static int init_phys_status_page(struct intel_ring_buffer *ring) { struct drm_i915_private *dev_priv = ring->dev->dev_private; - u32 addr; if (!dev_priv->status_page_dmah) { dev_priv->status_page_dmah = @@ -1249,11 +1274,6 @@ static int init_phys_hws_pga(struct intel_ring_buffer *ring) return -ENOMEM; } - addr = dev_priv->status_page_dmah->busaddr; - if (INTEL_INFO(ring->dev)->gen >= 4) - addr |= (dev_priv->status_page_dmah->busaddr >> 28) & 0xf0; - I915_WRITE(HWS_PGA, addr); - ring->status_page.page_addr = dev_priv->status_page_dmah->vaddr; memset(ring->status_page.page_addr, 0, PAGE_SIZE); @@ -1281,7 +1301,7 @@ static int intel_init_ring_buffer(struct drm_device *dev, return ret; } else { BUG_ON(ring->id != RCS); - ret = init_phys_hws_pga(ring); + ret = init_phys_status_page(ring); if (ret) return ret; } @@ -1893,7 +1913,7 @@ int intel_render_ring_init_dri(struct drm_device *dev, u64 start, u32 size) } if (!I915_NEED_GFX_HWS(dev)) { - ret = init_phys_hws_pga(ring); + ret = init_phys_status_page(ring); if (ret) return ret; } |