diff options
Diffstat (limited to 'drivers/gpu/drm/sun4i/sun4i_tcon.c')
| -rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.c | 46 |
1 files changed, 27 insertions, 19 deletions
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index ae7ae432aa4a..eb3b2350687f 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -545,30 +545,13 @@ static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon, if (info->bus_flags & DRM_BUS_FLAG_DE_LOW) val |= SUN4I_TCON0_IO_POL_DE_NEGATIVE; - /* - * On A20 and similar SoCs, the only way to achieve Positive Edge - * (Rising Edge), is setting dclk clock phase to 2/3(240°). - * By default TCON works in Negative Edge(Falling Edge), - * this is why phase is set to 0 in that case. - * Unfortunately there's no way to logically invert dclk through - * IO_POL register. - * The only acceptable way to work, triple checked with scope, - * is using clock phase set to 0° for Negative Edge and set to 240° - * for Positive Edge. - * On A33 and similar SoCs there would be a 90° phase option, - * but it divides also dclk by 2. - * Following code is a way to avoid quirks all around TCON - * and DOTCLOCK drivers. - */ - if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE) - clk_set_phase(tcon->dclk, 240); - if (info->bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE) - clk_set_phase(tcon->dclk, 0); + val |= SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE; regmap_update_bits(tcon->regs, SUN4I_TCON0_IO_POL_REG, SUN4I_TCON0_IO_POL_HSYNC_POSITIVE | SUN4I_TCON0_IO_POL_VSYNC_POSITIVE | + SUN4I_TCON0_IO_POL_DCLK_DRIVE_NEGEDGE | SUN4I_TCON0_IO_POL_DE_NEGATIVE, val); @@ -665,6 +648,30 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon, SUN4I_TCON1_BASIC5_V_SYNC(vsync) | SUN4I_TCON1_BASIC5_H_SYNC(hsync)); + /* Setup the polarity of multiple signals */ + if (tcon->quirks->polarity_in_ch0) { + val = 0; + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; + + regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val); + } else { + /* according to vendor driver, this bit must be always set */ + val = SUN4I_TCON1_IO_POL_UNKNOWN; + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + val |= SUN4I_TCON1_IO_POL_HSYNC_POSITIVE; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + val |= SUN4I_TCON1_IO_POL_VSYNC_POSITIVE; + + regmap_write(tcon->regs, SUN4I_TCON1_IO_POL_REG, val); + } + /* Map output pins to channel 1 */ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, SUN4I_TCON_GCTL_IOMAP_MASK, @@ -1482,6 +1489,7 @@ static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = { static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = { .has_channel_1 = true, + .polarity_in_ch0 = true, .set_mux = sun8i_r40_tcon_tv_set_mux, }; |