diff options
Diffstat (limited to 'drivers/gpu/drm')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_drv.h | 46 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_perf.c | 1034 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 22 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/intel_lrc.c | 2 |
4 files changed, 1016 insertions, 88 deletions
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 2faad94c9ef2..eefb35a5d27d 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -2018,9 +2018,17 @@ struct i915_oa_ops { void (*init_oa_buffer)(struct drm_i915_private *dev_priv); /** - * @enable_metric_set: Applies any MUX configuration to set up the - * Boolean and Custom (B/C) counters that are part of the counter - * reports being sampled. May apply system constraints such as + * @select_metric_set: The auto generated code that checks whether a + * requested OA config is applicable to the system and if so sets up + * the mux, oa and flex eu register config pointers according to the + * current dev_priv->perf.oa.metrics_set. + */ + int (*select_metric_set)(struct drm_i915_private *dev_priv); + + /** + * @enable_metric_set: Selects and applies any MUX configuration to set + * up the Boolean and Custom (B/C) counters that are part of the + * counter reports being sampled. May apply system constraints such as * disabling EU clock gating as required. */ int (*enable_metric_set)(struct drm_i915_private *dev_priv); @@ -2051,20 +2059,13 @@ struct i915_oa_ops { size_t *offset); /** - * @oa_buffer_check: Check for OA buffer data + update tail - * - * This is either called via fops or the poll check hrtimer (atomic - * ctx) without any locks taken. + * @oa_hw_tail_read: read the OA tail pointer register * - * It's safe to read OA config state here unlocked, assuming that this - * is only called while the stream is enabled, while the global OA - * configuration can't be modified. - * - * Efficiency is more important than avoiding some false positives - * here, which will be handled gracefully - likely resulting in an - * %EAGAIN error for userspace. + * In particular this enables us to share all the fiddly code for + * handling the OA unit tail pointer race that affects multiple + * generations. */ - bool (*oa_buffer_check)(struct drm_i915_private *dev_priv); + u32 (*oa_hw_tail_read)(struct drm_i915_private *dev_priv); }; struct intel_cdclk_state { @@ -2429,6 +2430,7 @@ struct drm_i915_private { struct { struct i915_vma *vma; u8 *vaddr; + u32 last_ctx_id; int format; int format_size; @@ -2498,6 +2500,15 @@ struct drm_i915_private { } oa_buffer; u32 gen7_latched_oastatus1; + u32 ctx_oactxctrl_offset; + u32 ctx_flexeu0_offset; + + /** + * The RPT_ID/reason field for Gen8+ includes a bit + * to determine if the CTX ID in the report is valid + * but the specific bit differs between Gen 8 and 9 + */ + u32 gen8_valid_ctx_bit; struct i915_oa_ops ops; const struct i915_oa_format *oa_formats; @@ -2810,6 +2821,8 @@ intel_info(const struct drm_i915_private *dev_priv) #define IS_KBL_ULX(dev_priv) (INTEL_DEVID(dev_priv) == 0x590E || \ INTEL_DEVID(dev_priv) == 0x5915 || \ INTEL_DEVID(dev_priv) == 0x591E) +#define IS_SKL_GT2(dev_priv) (IS_SKYLAKE(dev_priv) && \ + (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0010) #define IS_SKL_GT3(dev_priv) (IS_SKYLAKE(dev_priv) && \ (INTEL_DEVID(dev_priv) & 0x00F0) == 0x0020) #define IS_SKL_GT4(dev_priv) (IS_SKYLAKE(dev_priv) && \ @@ -3554,6 +3567,9 @@ i915_gem_context_lookup_timeline(struct i915_gem_context *ctx, int i915_perf_open_ioctl(struct drm_device *dev, void *data, struct drm_file *file); +void i915_oa_init_reg_state(struct intel_engine_cs *engine, + struct i915_gem_context *ctx, + uint32_t *reg_state); /* i915_gem_evict.c */ int __must_check i915_gem_evict_something(struct i915_address_space *vm, diff --git a/drivers/gpu/drm/i915/i915_perf.c b/drivers/gpu/drm/i915/i915_perf.c index 7e56b895fd34..a6af4d7dc4d6 100644 --- a/drivers/gpu/drm/i915/i915_perf.c +++ b/drivers/gpu/drm/i915/i915_perf.c @@ -196,6 +196,12 @@ #include "i915_drv.h" #include "i915_oa_hsw.h" +#include "i915_oa_bdw.h" +#include "i915_oa_chv.h" +#include "i915_oa_sklgt2.h" +#include "i915_oa_sklgt3.h" +#include "i915_oa_sklgt4.h" +#include "i915_oa_bxt.h" /* HW requires this to be a power of two, between 128k and 16M, though driver * is currently generally designed assuming the largest 16M size is used such @@ -215,7 +221,7 @@ * * Although this can be observed explicitly while copying reports to userspace * by checking for a zeroed report-id field in tail reports, we want to account - * for this earlier, as part of the _oa_buffer_check to avoid lots of redundant + * for this earlier, as part of the oa_buffer_check to avoid lots of redundant * read() attempts. * * In effect we define a tail pointer for reading that lags the real tail @@ -237,7 +243,7 @@ * indicates that an updated tail pointer is needed. * * Most of the implementation details for this workaround are in - * gen7_oa_buffer_check_unlocked() and gen7_appand_oa_reports() + * oa_buffer_check_unlocked() and _append_oa_reports() * * Note for posterity: previously the driver used to define an effective tail * pointer that lagged the real pointer by a 'tail margin' measured in bytes @@ -272,6 +278,13 @@ static u32 i915_perf_stream_paranoid = true; #define INVALID_CTX_ID 0xffffffff +/* On Gen8+ automatically triggered OA reports include a 'reason' field... */ +#define OAREPORT_REASON_MASK 0x3f +#define OAREPORT_REASON_SHIFT 19 +#define OAREPORT_REASON_TIMER (1<<0) +#define OAREPORT_REASON_CTX_SWITCH (1<<3) +#define OAREPORT_REASON_CLK_RATIO (1<<5) + /* For sysctl proc_dointvec_minmax of i915_oa_max_sample_rate * @@ -303,6 +316,13 @@ static struct i915_oa_format hsw_oa_formats[I915_OA_FORMAT_MAX] = { [I915_OA_FORMAT_C4_B8] = { 7, 64 }, }; +static struct i915_oa_format gen8_plus_oa_formats[I915_OA_FORMAT_MAX] = { + [I915_OA_FORMAT_A12] = { 0, 64 }, + [I915_OA_FORMAT_A12_B8_C8] = { 2, 128 }, + [I915_OA_FORMAT_A32u40_A4u32_B8_C8] = { 5, 256 }, + [I915_OA_FORMAT_C4_B8] = { 7, 64 }, +}; + #define SAMPLE_OA_REPORT (1<<0) /** @@ -332,8 +352,20 @@ struct perf_open_properties { int oa_period_exponent; }; +static u32 gen8_oa_hw_tail_read(struct drm_i915_private *dev_priv) +{ + return I915_READ(GEN8_OATAILPTR) & GEN8_OATAILPTR_MASK; +} + +static u32 gen7_oa_hw_tail_read(struct drm_i915_private *dev_priv) +{ + u32 oastatus1 = I915_READ(GEN7_OASTATUS1); + + return oastatus1 & GEN7_OASTATUS1_TAIL_MASK; +} + /** - * gen7_oa_buffer_check_unlocked - check for data and update tail ptr state + * oa_buffer_check_unlocked - check for data and update tail ptr state * @dev_priv: i915 device instance * * This is either called via fops (for blocking reads in user ctx) or the poll @@ -356,12 +388,11 @@ struct perf_open_properties { * * Returns: %true if the OA buffer contains data, else %false */ -static bool gen7_oa_buffer_check_unlocked(struct drm_i915_private *dev_priv) +static bool oa_buffer_check_unlocked(struct drm_i915_private *dev_priv) { int report_size = dev_priv->perf.oa.oa_buffer.format_size; unsigned long flags; unsigned int aged_idx; - u32 oastatus1; u32 head, hw_tail, aged_tail, aging_tail; u64 now; @@ -381,8 +412,7 @@ static bool gen7_oa_buffer_check_unlocked(struct drm_i915_private *dev_priv) aged_tail = dev_priv->perf.oa.oa_buffer.tails[aged_idx].offset; aging_tail = dev_priv->perf.oa.oa_buffer.tails[!aged_idx].offset; - oastatus1 = I915_READ(GEN7_OASTATUS1); - hw_tail = oastatus1 & GEN7_OASTATUS1_TAIL_MASK; + hw_tail = dev_priv->perf.oa.ops.oa_hw_tail_read(dev_priv); /* The tail pointer increases in 64 byte increments, * not in report_size steps... @@ -404,6 +434,7 @@ static bool gen7_oa_buffer_check_unlocked(struct drm_i915_private *dev_priv) if (aging_tail != INVALID_TAIL_PTR && ((now - dev_priv->perf.oa.oa_buffer.aging_timestamp) > OA_TAIL_MARGIN_NSEC)) { + aged_idx ^= 1; dev_priv->perf.oa.oa_buffer.aged_tail_idx = aged_idx; @@ -553,6 +584,300 @@ static int append_oa_sample(struct i915_perf_stream *stream, * * Returns: 0 on success, negative error code on failure. */ +static int gen8_append_oa_reports(struct i915_perf_stream *stream, + char __user *buf, + size_t count, + size_t *offset) +{ + struct drm_i915_private *dev_priv = stream->dev_priv; + int report_size = dev_priv->perf.oa.oa_buffer.format_size; + u8 *oa_buf_base = dev_priv->perf.oa.oa_buffer.vaddr; + u32 gtt_offset = i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma); + u32 mask = (OA_BUFFER_SIZE - 1); + size_t start_offset = *offset; + unsigned long flags; + unsigned int aged_tail_idx; + u32 head, tail; + u32 taken; + int ret = 0; + + if (WARN_ON(!stream->enabled)) + return -EIO; + + spin_lock_irqsave(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags); + + head = dev_priv->perf.oa.oa_buffer.head; + aged_tail_idx = dev_priv->perf.oa.oa_buffer.aged_tail_idx; + tail = dev_priv->perf.oa.oa_buffer.tails[aged_tail_idx].offset; + + spin_unlock_irqrestore(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags); + + /* + * An invalid tail pointer here means we're still waiting for the poll + * hrtimer callback to give us a pointer + */ + if (tail == INVALID_TAIL_PTR) + return -EAGAIN; + + /* + * NB: oa_buffer.head/tail include the gtt_offset which we don't want + * while indexing relative to oa_buf_base. + */ + head -= gtt_offset; + tail -= gtt_offset; + + /* + * An out of bounds or misaligned head or tail pointer implies a driver + * bug since we validate + align the tail pointers we read from the + * hardware and we are in full control of the head pointer which should + * only be incremented by multiples of the report size (notably also + * all a power of two). + */ + if (WARN_ONCE(head > OA_BUFFER_SIZE || head % report_size || + tail > OA_BUFFER_SIZE || tail % report_size, + "Inconsistent OA buffer pointers: head = %u, tail = %u\n", + head, tail)) + return -EIO; + + + for (/* none */; + (taken = OA_TAKEN(tail, head)); + head = (head + report_size) & mask) { + u8 *report = oa_buf_base + head; + u32 *report32 = (void *)report; + u32 ctx_id; + u32 reason; + + /* + * All the report sizes factor neatly into the buffer + * size so we never expect to see a report split + * between the beginning and end of the buffer. + * + * Given the initial alignment check a misalignment + * here would imply a driver bug that would result + * in an overrun. + */ + if (WARN_ON((OA_BUFFER_SIZE - head) < report_size)) { + DRM_ERROR("Spurious OA head ptr: non-integral report offset\n"); + break; + } + + /* + * The reason field includes flags identifying what + * triggered this specific report (mostly timer + * triggered or e.g. due to a context switch). + * + * This field is never expected to be zero so we can + * check that the report isn't invalid before copying + * it to userspace... + */ + reason = ((report32[0] >> OAREPORT_REASON_SHIFT) & + OAREPORT_REASON_MASK); + if (reason == 0) { + if (__ratelimit(&dev_priv->perf.oa.spurious_report_rs)) + DRM_NOTE("Skipping spurious, invalid OA report\n"); + continue; + } + + /* + * XXX: Just keep the lower 21 bits for now since I'm not + * entirely sure if the HW touches any of the higher bits in + * this field + */ + ctx_id = report32[2] & 0x1fffff; + + /* + * Squash whatever is in the CTX_ID field if it's marked as + * invalid to be sure we avoid false-positive, single-context + * filtering below... + * + * Note: that we don't clear the valid_ctx_bit so userspace can + * understand that the ID has been squashed by the kernel. + */ + if (!(report32[0] & dev_priv->perf.oa.gen8_valid_ctx_bit)) + ctx_id = report32[2] = INVALID_CTX_ID; + + /* + * NB: For Gen 8 the OA unit no longer supports clock gating + * off for a specific context and the kernel can't securely + * stop the counters from updating as system-wide / global + * values. + * + * Automatic reports now include a context ID so reports can be + * filtered on the cpu but it's not worth trying to + * automatically subtract/hide counter progress for other + * contexts while filtering since we can't stop userspace + * issuing MI_REPORT_PERF_COUNT commands which would still + * provide a side-band view of the real values. + * + * To allow userspace (such as Mesa/GL_INTEL_performance_query) + * to normalize counters for a single filtered context then it + * needs be forwarded bookend context-switch reports so that it + * can track switches in between MI_REPORT_PERF_COUNT commands + * and can itself subtract/ignore the progress of counters + * associated with other contexts. Note that the hardware + * automatically triggers reports when switching to a new + * context which are tagged with the ID of the newly active + * context. To avoid the complexity (and likely fragility) of + * reading ahead while parsing reports to try and minimize + * forwarding redundant context switch reports (i.e. between + * other, unrelated contexts) we simply elect to forward them + * all. + * + * We don't rely solely on the reason field to identify context + * switches since it's not-uncommon for periodic samples to + * identify a switch before any 'context switch' report. + */ + if (!dev_priv->perf.oa.exclusive_stream->ctx || + dev_priv->perf.oa.specific_ctx_id == ctx_id || + (dev_priv->perf.oa.oa_buffer.last_ctx_id == + dev_priv->perf.oa.specific_ctx_id) || + reason & OAREPORT_REASON_CTX_SWITCH) { + + /* + * While filtering for a single context we avoid + * leaking the IDs of other contexts. + */ + if (dev_priv->perf.oa.exclusive_stream->ctx && + dev_priv->perf.oa.specific_ctx_id != ctx_id) { + report32[2] = INVALID_CTX_ID; + } + + ret = append_oa_sample(stream, buf, count, offset, + report); + if (ret) + break; + + dev_priv->perf.oa.oa_buffer.last_ctx_id = ctx_id; + } + + /* + * The above reason field sanity check is based on + * the assumption that the OA buffer is initially + * zeroed and we reset the field after copying so the + * check is still meaningful once old reports start + * being overwritten. + */ + report32[0] = 0; + } + + if (start_offset != *offset) { + spin_lock_irqsave(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags); + + /* + * We removed the gtt_offset for the copy loop above, indexing + * relative to oa_buf_base so put back here... + */ + head += gtt_offset; + + I915_WRITE(GEN8_OAHEADPTR, head & GEN8_OAHEADPTR_MASK); + dev_priv->perf.oa.oa_buffer.head = head; + + spin_unlock_irqrestore(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags); + } + + return ret; +} + +/** + * gen8_oa_read - copy status records then buffered OA reports + * @stream: An i915-perf stream opened for OA metrics + * @buf: destination buffer given by userspace + * @count: the number of bytes userspace wants to read + * @offset: (inout): the current position for writing into @buf + * + * Checks OA unit status registers and if necessary appends corresponding + * status records for userspace (such as for a buffer full condition) and then + * initiate appending any buffered OA reports. + * + * Updates @offset according to the number of bytes successfully copied into + * the userspace buffer. + * + * NB: some data may be successfully copied to the userspace buffer + * even if an error is returned, and this is reflected in the + * updated @offset. + * + * Returns: zero on success or a negative error code + */ +static int gen8_oa_read(struct i915_perf_stream *stream, + char __user *buf, + size_t count, + size_t *offset) +{ + struct drm_i915_private *dev_priv = stream->dev_priv; + u32 oastatus; + int ret; + + if (WARN_ON(!dev_priv->perf.oa.oa_buffer.vaddr)) + return -EIO; + + oastatus = I915_READ(GEN8_OASTATUS); + + /* + * We treat OABUFFER_OVERFLOW as a significant error: + * + * Although theoretically we could handle this more gracefully + * sometimes, some Gens don't correctly suppress certain + * automatically triggered reports in this condition and so we + * have to assume that old reports are now being trampled + * over. + * + * Considering how we don't currently give userspace control + * over the OA buffer size and always configure a large 16MB + * buffer, then a buffer overflow does anyway likely indicate + * that something has gone quite badly wrong. + */ + if (oastatus & GEN8_OASTATUS_OABUFFER_OVERFLOW) { + ret = append_oa_status(stream, buf, count, offset, + DRM_I915_PERF_RECORD_OA_BUFFER_LOST); + if (ret) + return ret; + + DRM_DEBUG("OA buffer overflow (exponent = %d): force restart\n", + dev_priv->perf.oa.period_exponent); + + dev_priv->perf.oa.ops.oa_disable(dev_priv); + dev_priv->perf.oa.ops.oa_enable(dev_priv); + + /* + * Note: .oa_enable() is expected to re-init the oabuffer and + * reset GEN8_OASTATUS for us + */ + oastatus = I915_READ(GEN8_OASTATUS); + } + + if (oastatus & GEN8_OASTATUS_REPORT_LOST) { + ret = append_oa_status(stream, buf, count, offset, + DRM_I915_PERF_RECORD_OA_REPORT_LOST); + if (ret) + return ret; + I915_WRITE(GEN8_OASTATUS, + oastatus & ~GEN8_OASTATUS_REPORT_LOST); + } + + return gen8_append_oa_reports(stream, buf, count, offset); +} + +/** + * Copies all buffered OA reports into userspace read() buffer. + * @stream: An i915-perf stream opened for OA metrics + * @buf: destination buffer given by userspace + * @count: the number of bytes userspace wants to read + * @offset: (inout): the current position for writing into @buf + * + * Notably any error condition resulting in a short read (-%ENOSPC or + * -%EFAULT) will be returned even though one or more records may + * have been successfully copied. In this case it's up to the caller + * to decide if the error should be squashed before returning to + * userspace. + * + * Note: reports are consumed from the head, and appended to the + * tail, so the tail chases the head?... If you think that's mad + * and back-to-front you're not alone, but this follows the + * Gen PRM naming convention. + * + * Returns: 0 on success, negative error code on failure. + */ static int gen7_append_oa_reports(struct i915_perf_stream *stream, char __user *buf, size_t count, @@ -732,7 +1057,8 @@ static int gen7_oa_read(struct i915_perf_stream *stream, if (ret) return ret; - DRM_DEBUG("OA buffer overflow: force restart\n"); + DRM_DEBUG("OA buffer overflow (exponent = %d): force restart\n", + dev_priv->perf.oa.period_exponent); dev_priv->perf.oa.ops.oa_disable(dev_priv); dev_priv->perf.oa.ops.oa_enable(dev_priv); @@ -775,7 +1101,7 @@ static int i915_oa_wait_unlocked(struct i915_perf_stream *stream) return -EIO; return wait_event_interruptible(dev_priv->perf.oa.poll_wq, - dev_priv->perf.oa.ops.oa_buffer_check(dev_priv)); + oa_buffer_check_unlocked(dev_priv)); } /** @@ -832,30 +1158,38 @@ static int i915_oa_read(struct i915_perf_stream *stream, static int oa_get_render_ctx_id(struct i915_perf_stream *stream) { struct drm_i915_private *dev_priv = stream->dev_priv; - struct intel_engine_cs *engine = dev_priv->engine[RCS]; - struct intel_ring *ring; - int ret; - ret = i915_mutex_lock_interruptible(&dev_priv->drm); - if (ret) - return ret; + if (i915.enable_execlists) + dev_priv->perf.oa.specific_ctx_id = stream->ctx->hw_id; + else { + struct intel_engine_cs *engine = dev_priv->engine[RCS]; + struct intel_ring *ring; + int ret; - /* As the ID is the gtt offset of the context's vma we pin - * the vma to ensure the ID remains fixed. - * - * NB: implied RCS engine... - */ - ring = engine->context_pin(engine, stream->ctx); - mutex_unlock(&dev_priv->drm.struct_mutex); - if (IS_ERR(ring)) - return PTR_ERR(ring); + ret = i915_mutex_lock_interruptible(&dev_priv->drm); + if (ret) + return ret; + + /* + * As the ID is the gtt offset of the context's vma we + * pin the vma to ensure the ID remains fixed. + * + * NB: implied RCS engine... + */ + ring = engine->context_pin(engine, stream->ctx); + mutex_unlock(&dev_priv->drm.struct_mutex); + if (IS_ERR(ring)) + return PTR_ERR(ring); - /* Explicitly track the ID (instead of calling i915_ggtt_offset() - * on the fly) considering the difference with gen8+ and - * execlists - */ - dev_priv->perf.oa.specific_ctx_id = - i915_ggtt_offset(stream->ctx->engine[engine->id].state); + + /* + * Explicitly track the ID (instead of calling + * i915_ggtt_offset() on the fly) considering the difference + * with gen8+ and execlists + */ + dev_priv->perf.oa.specific_ctx_id = + i915_ggtt_offset(stream->ctx->engine[engine->id].state); + } return 0; } @@ -870,14 +1204,19 @@ static int oa_get_render_ctx_id(struct i915_perf_stream *stream) static void oa_put_render_ctx_id(struct i915_perf_stream *stream) { struct drm_i915_private *dev_priv = stream->dev_priv; - struct intel_engine_cs *engine = dev_priv->engine[RCS]; - mutex_lock(&dev_priv->drm.struct_mutex); + if (i915.enable_execlists) { + dev_priv->perf.oa.specific_ctx_id = INVALID_CTX_ID; + } else { + struct intel_engine_cs *engine = dev_priv->engine[RCS]; - dev_priv->perf.oa.specific_ctx_id = INVALID_CTX_ID; - engine->context_unpin(engine, stream->ctx); + mutex_lock(&dev_priv->drm.struct_mutex); - mutex_unlock(&dev_priv->drm.struct_mutex); + dev_priv->perf.oa.specific_ctx_id = INVALID_CTX_ID; + engine->context_unpin(engine, stream->ctx); + + mutex_unlock(&dev_priv->drm.struct_mutex); + } } static void @@ -901,6 +1240,12 @@ static void i915_oa_stream_destroy(struct i915_perf_stream *stream) BUG_ON(stream != dev_priv->perf.oa.exclusive_stream); + /* + * Unset exclusive_stream first, it might be checked while + * disabling the metric set on gen8+. + */ + dev_priv->perf.oa.exclusive_stream = NULL; + dev_priv->perf.oa.ops.disable_metric_set(dev_priv); free_oa_buffer(dev_priv); @@ -911,8 +1256,6 @@ static void i915_oa_stream_destroy(struct i915_perf_stream *stream) if (stream->ctx) oa_put_render_ctx_id(stream); - dev_priv->perf.oa.exclusive_stream = NULL; - if (dev_priv->perf.oa.spurious_report_rs.missed) { DRM_NOTE("%d spurious OA report notices suppressed due to ratelimiting\n", dev_priv->perf.oa.spurious_report_rs.missed); @@ -967,6 +1310,65 @@ static void gen7_init_oa_buffer(struct drm_i915_private *dev_priv) dev_priv->perf.oa.pollin = false; } +static void gen8_init_oa_buffer(struct drm_i915_private *dev_priv) +{ + u32 gtt_offset = i915_ggtt_offset(dev_priv->perf.oa.oa_buffer.vma); + unsigned long flags; + + spin_lock_irqsave(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags); + + I915_WRITE(GEN8_OASTATUS, 0); + I915_WRITE(GEN8_OAHEADPTR, gtt_offset); + dev_priv->perf.oa.oa_buffer.head = gtt_offset; + + I915_WRITE(GEN8_OABUFFER_UDW, 0); + + /* + * PRM says: + * + * "This MMIO must be set before the OATAILPTR + * register and after the OAHEADPTR register. This is + * to enable proper functionality of the overflow + * bit." + */ + I915_WRITE(GEN8_OABUFFER, gtt_offset | + OABUFFER_SIZE_16M | OA_MEM_SELECT_GGTT); + I915_WRITE(GEN8_OATAILPTR, gtt_offset & GEN8_OATAILPTR_MASK); + + /* Mark that we need updated tail pointers to read from... */ + dev_priv->perf.oa.oa_buffer.tails[0].offset = INVALID_TAIL_PTR; + dev_priv->perf.oa.oa_buffer.tails[1].offset = INVALID_TAIL_PTR; + + /* + * Reset state used to recognise context switches, affecting which + * reports we will forward to userspace while filtering for a single + * context. + */ + dev_priv->perf.oa.oa_buffer.last_ctx_id = INVALID_CTX_ID; + + spin_unlock_irqrestore(&dev_priv->perf.oa.oa_buffer.ptr_lock, flags); + + /* + * NB: although the OA buffer will initially be allocated + * zeroed via shmfs (and so this memset is redundant when + * first allocating), we may re-init the OA buffer, either + * when re-enabling a stream or in error/reset paths. + * + * The reason we clear the buffer for each re-init is for the + * sanity check in gen8_append_oa_reports() that looks at the + * reason field to make sure it's non-zero which relies on + * the assumption that new reports are being written to zeroed + * memory... + */ + memset(dev_priv->perf.oa.oa_buffer.vaddr, 0, OA_BUFFER_SIZE); + + /* + * Maybe make ->pollin per-stream state if we support multiple + * concurrent streams in the future. + */ + dev_priv->perf.oa.pollin = false; +} + static int alloc_oa_buffer(struct drm_i915_private *dev_priv) { struct drm_i915_gem_object *bo; @@ -1114,6 +1516,324 @@ static void hsw_disable_metric_set(struct drm_i915_private *dev_priv) ~GT_NOA_ENABLE)); } +/* + * NB: It must always remain pointer safe to run this even if the OA unit + * has been disabled. + * + * It's fine to put out-of-date values into these per-context registers + * in the case that the OA unit has been disabled. + */ +static void gen8_update_reg_state_unlocked(struct i915_gem_context *ctx, + u32 *reg_state) +{ + struct drm_i915_private *dev_priv = ctx->i915; + const struct i915_oa_reg *flex_regs = dev_priv->perf.oa.flex_regs; + int n_flex_regs = dev_priv->perf.oa.flex_regs_len; + u32 ctx_oactxctrl = dev_priv->perf.oa.ctx_oactxctrl_offset; + u32 ctx_flexeu0 = dev_priv->perf.oa.ctx_flexeu0_offset; + /* The MMIO offsets for Flex EU registers aren't contiguous */ + u32 flex_mmio[] = { + i915_mmio_reg_offset(EU_PERF_CNTL0), + i915_mmio_reg_offset(EU_PERF_CNTL1), + i915_mmio_reg_offset(EU_PERF_CNTL2), + i915_mmio_reg_offset(EU_PERF_CNTL3), + i915_mmio_reg_offset(EU_PERF_CNTL4), + i915_mmio_reg_offset(EU_PERF_CNTL5), + i915_mmio_reg_offset(EU_PERF_CNTL6), + }; + int i; + + reg_state[ctx_oactxctrl] = i915_mmio_reg_offset(GEN8_OACTXCONTROL); + reg_state[ctx_oactxctrl+1] = (dev_priv->perf.oa.period_exponent << + GEN8_OA_TIMER_PERIOD_SHIFT) | + (dev_priv->perf.oa.periodic ? + GEN8_OA_TIMER_ENABLE : 0) | + GEN8_OA_COUNTER_RESUME; + + for (i = 0; i < ARRAY_SIZE(flex_mmio); i++) { + u32 state_offset = ctx_flexeu0 + i * 2; + u32 mmio = flex_mmio[i]; + + /* + * This arbitrary default will select the 'EU FPU0 Pipeline + * Active' event. In the future it's anticipated that there + * will be an explicit 'No Event' we can select, but not yet... + */ + u32 value = 0; + int j; + + for (j = 0; j < n_flex_regs; j++) { + if (i915_mmio_reg_offset(flex_regs[j].addr) == mmio) { + value = flex_regs[j].value; + break; + } + } + + reg_state[state_offset] = mmio; + reg_state[state_offset+1] = value; + } +} + +/* + * Same as gen8_update_reg_state_unlocked only through the batchbuffer. This + * is only used by the kernel context. + */ +static int gen8_emit_oa_config(struct drm_i915_gem_request *req) +{ + struct drm_i915_private *dev_priv = req->i915; + const struct i915_oa_reg *flex_regs = dev_priv->perf.oa.flex_regs; + int n_flex_regs = dev_priv->perf.oa.flex_regs_len; + /* The MMIO offsets for Flex EU registers aren't contiguous */ + u32 flex_mmio[] = { + i915_mmio_reg_offset(EU_PERF_CNTL0), + i915_mmio_reg_offset(EU_PERF_CNTL1), + i915_mmio_reg_offset(EU_PERF_CNTL2), + i915_mmio_reg_offset(EU_PERF_CNTL3), + i915_mmio_reg_offset(EU_PERF_CNTL4), + i915_mmio_reg_offset(EU_PERF_CNTL5), + i915_mmio_reg_offset(EU_PERF_CNTL6), + }; + u32 *cs; + int i; + + cs = intel_ring_begin(req, n_flex_regs * 2 + 4); + if (IS_ERR(cs)) + return PTR_ERR(cs); + + *cs++ = MI_LOAD_REGISTER_IMM(n_flex_regs + 1); + + *cs++ = i915_mmio_reg_offset(GEN8_OACTXCONTROL); + *cs++ = (dev_priv->perf.oa.period_exponent << GEN8_OA_TIMER_PERIOD_SHIFT) | + (dev_priv->perf.oa.periodic ? GEN8_OA_TIMER_ENABLE : 0) | + GEN8_OA_COUNTER_RESUME; + + for (i = 0; i < ARRAY_SIZE(flex_mmio); i++) { + u32 mmio = flex_mmio[i]; + + /* + * This arbitrary default will select the 'EU FPU0 Pipeline + * Active' event. In the future it's anticipated that there + * will be an explicit 'No Event' we can select, but not + * yet... + */ + u32 value = 0; + int j; + + for (j = 0; j < n_flex_regs; j++) { + if (i915_mmio_reg_offset(flex_regs[j].addr) == mmio) { + value = flex_regs[j].value; + break; + } + } + + *cs++ = mmio; + *cs++ = value; + } + + *cs++ = MI_NOOP; + intel_ring_advance(req, cs); + + return 0; +} + +static int gen8_switch_to_updated_kernel_context(struct drm_i915_private *dev_priv) +{ + struct intel_engine_cs *engine = dev_priv->engine[RCS]; + struct i915_gem_timeline *timeline; + struct drm_i915_gem_request *req; + int ret; + + lockdep_assert_held(&dev_priv->drm.struct_mutex); + + i915_gem_retire_requests(dev_priv); + + req = i915_gem_request_alloc(engine, dev_priv->kernel_context); + if (IS_ERR(req)) + return PTR_ERR(req); + + ret = gen8_emit_oa_config(req); + if (ret) { + i915_add_request(req); + return ret; + } + + /* Queue this switch after all other activity */ + list_for_each_entry(timeline, &dev_priv->gt.timelines, link) { + struct drm_i915_gem_request *prev; + struct intel_timeline *tl; + + tl = &timeline->engine[engine->id]; + prev = i915_gem_active_raw(&tl->last_request, + &dev_priv->drm.struct_mutex); + if (prev) + i915_sw_fence_await_sw_fence_gfp(&req->submit, + &prev->submit, + GFP_KERNEL); + } + + ret = i915_switch_context(req); + i915_add_request(req); + + return ret; +} + +/* + * Manages updating the per-context aspects of the OA stream + * configuration across all contexts. + * + * The awkward consideration here is that OACTXCONTROL controls the + * exponent for periodic sampling which is primarily used for system + * wide profiling where we'd like a consistent sampling period even in + * the face of context switches. + * + * Our approach of updating the register state context (as opposed to + * say using a workaround batch buffer) ensures that the hardware + * won't automatically reload an out-of-date timer exponent even + * transiently before a WA BB could be parsed. + * + * This function needs to: + * - Ensure the currently running context's per-context OA state is + * updated + * - Ensure that all existing contexts will have the correct per-context + * OA state if they are scheduled for use. + * - Ensure any new contexts will be initialized with the correct + * per-context OA state. + * + * Note: it's only the RCS/Render context that has any OA state. + */ +static int gen8_configure_all_contexts(struct drm_i915_private *dev_priv, + bool interruptible) +{ + struct i915_gem_context *ctx; + int ret; + unsigned int wait_flags = I915_WAIT_LOCKED; + + if (interruptible) { + ret = i915_mutex_lock_interruptible(&dev_priv->drm); + if (ret) + return ret; + + wait_flags |= I915_WAIT_INTERRUPTIBLE; + } else { + mutex_lock(&dev_priv->drm.struct_mutex); + } + + /* Switch away from any user context. */ + ret = gen8_switch_to_updated_kernel_context(dev_priv); + if (ret) + goto out; + + /* + * The OA register config is setup through the context image. This image + * might be written to by the GPU on context switch (in particular on + * lite-restore). This means we can't safely update a context's image, + * if this context is scheduled/submitted to run on the GPU. + * + * We could emit the OA register config through the batch buffer but + * this might leave small interval of time where the OA unit is + * configured at an invalid sampling period. + * + * So far the best way to work around this issue seems to be draining + * the GPU from any submitted work. + */ + ret = i915_gem_wait_for_idle(dev_priv, wait_flags); + if (ret) + goto out; + + /* Update all contexts now that we've stalled the submission. */ + list_for_each_entry(ctx, &dev_priv->context_list, link) { + struct intel_context *ce = &ctx->engine[RCS]; + u32 *regs; + + /* OA settings will be set upon first use */ + if (!ce->state) + continue; + + regs = i915_gem_object_pin_map(ce->state->obj, I915_MAP_WB); + if (IS_ERR(regs)) { + ret = PTR_ERR(regs); + goto out; + } + + ce->state->obj->mm.dirty = true; + regs += LRC_STATE_PN * PAGE_SIZE / sizeof(*regs); + + gen8_update_reg_state_unlocked(ctx, regs); + + i915_gem_object_unpin_map(ce->state->obj); + } + + out: + mutex_unlock(&dev_priv->drm.struct_mutex); + + return ret; +} + +static int gen8_enable_metric_set(struct drm_i915_private *dev_priv) +{ + int ret = dev_priv->perf.oa.ops.select_metric_set(dev_priv); + int i; + + if (ret) + return ret; + + /* + * We disable slice/unslice clock ratio change reports on SKL since + * they are too noisy. The HW generates a lot of redundant reports + * where the ratio hasn't really changed causing a lot of redundant + * work to processes and increasing the chances we'll hit buffer + * overruns. + * + * Although we don't currently use the 'disable overrun' OABUFFER + * feature it's worth noting that clock ratio reports have to be + * disabled before considering to use that feature since the HW doesn't + * correctly block these reports. + * + * Currently none of the high-level metrics we have depend on knowing + * this ratio to normalize. + * + * Note: This register is not power context saved and restored, but + * that's OK considering that we disable RC6 while the OA unit is + * enabled. + * + * The _INCLUDE_CLK_RATIO bit allows the slice/unslice frequency to + * be read back from automatically triggered reports, as part of the + * RPT_ID field. + */ + if (IS_SKYLAKE(dev_priv) || IS_BROXTON(dev_priv)) { + I915_WRITE(GEN8_OA_DEBUG, + _MASKED_BIT_ENABLE(GEN9_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS | + GEN9_OA_DEBUG_INCLUDE_CLK_RATIO)); + } + + /* + * Update all contexts prior writing the mux configurations as we need + * to make sure all slices/subslices are ON before writing to NOA + * registers. + */ + ret = gen8_configure_all_contexts(dev_priv, true); + if (ret) + return ret; + + I915_WRITE(GDT_CHICKEN_BITS, 0xA0); + for (i = 0; i < dev_priv->perf.oa.n_mux_configs; i++) { + config_oa_regs(dev_priv, dev_priv->perf.oa.mux_regs[i], + dev_priv->perf.oa.mux_regs_lens[i]); + } + I915_WRITE(GDT_CHICKEN_BITS, 0x80); + + config_oa_regs(dev_priv, dev_priv->perf.oa.b_counter_regs, + dev_priv->perf.oa.b_counter_regs_len); + + return 0; +} + +static void gen8_disable_metric_set(struct drm_i915_private *dev_priv) +{ + /* Reset all contexts' slices/subslices configurations. */ + gen8_configure_all_contexts(dev_priv, false); +} + static void gen7_update_oacontrol_locked(struct drm_i915_private *dev_priv) { lockdep_assert_held(&dev_priv->perf.hook_lock); @@ -1158,6 +1878,31 @@ static void gen7_oa_enable(struct drm_i915_private *dev_priv) spin_unlock_irqrestore(&dev_priv->perf.hook_lock, flags); } +static void gen8_oa_enable(struct drm_i915_private *dev_priv) +{ + u32 report_format = dev_priv->perf.oa.oa_buffer.format; + + /* + * Reset buf pointers so we don't forward reports from before now. + * + * Think carefully if considering trying to avoid this, since it + * also ensures status flags and the buffer itself are cleared + * in error paths, and we have checks for invalid reports based + * on the assumption that certain fields are written to zeroed + * memory which this helps maintains. + */ + gen8_init_oa_buffer(dev_priv); + + /* + * Note: we don't rely on the hardware to perform single context + * filtering and instead filter on the cpu based on the context-id + * field of reports + */ + I915_WRITE(GEN8_OACONTROL, (report_format << + GEN8_OA_REPORT_FORMAT_SHIFT) | + GEN8_OA_COUNTER_ENABLE); +} + /** * i915_oa_stream_enable - handle `I915_PERF_IOCTL_ENABLE` for OA stream * @stream: An i915 perf stream opened for OA metrics @@ -1184,6 +1929,11 @@ static void gen7_oa_disable(struct drm_i915_private *dev_priv) I915_WRITE(GEN7_OACONTROL, 0); } +static void gen8_oa_disable(struct drm_i915_private *dev_priv) +{ + I915_WRITE(GEN8_OACONTROL, 0); +} + /** * i915_oa_stream_disable - handle `I915_PERF_IOCTL_DISABLE` for OA stream * @stream: An i915 perf stream opened for OA metrics @@ -1362,6 +2112,21 @@ err_oa_buf_alloc: return ret; } +void i915_oa_init_reg_state(struct intel_engine_cs *engine, + struct i915_gem_context *ctx, + u32 *reg_state) +{ + struct drm_i915_private *dev_priv = engine->i915; + + if (engine->id != RCS) + return; + + if (!dev_priv->perf.initialized) + return; + + gen8_update_reg_state_unlocked(ctx, reg_state); +} + /** * i915_perf_read_locked - &i915_perf_stream_ops->read with error normalisation * @stream: An i915 perf stream @@ -1487,7 +2252,7 @@ static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer) container_of(hrtimer, typeof(*dev_priv), perf.oa.poll_check_timer); - if (dev_priv->perf.oa.ops.oa_buffer_check(dev_priv)) { + if (oa_buffer_check_unlocked(dev_priv)) { dev_priv->perf.oa.pollin = true; wake_up(&dev_priv->perf.oa.poll_wq); } @@ -1776,6 +2541,7 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv, struct i915_gem_context *specific_ctx = NULL; struct i915_perf_stream *stream = NULL; unsigned long f_flags = 0; + bool privileged_op = true; int stream_fd; int ret; @@ -1793,12 +2559,29 @@ i915_perf_open_ioctl_locked(struct drm_i915_private *dev_priv, } } + /* + * On Haswell the OA unit supports clock gating off for a specific + * context and in this mode there's no visibility of metrics for the + * rest of the system, which we consider acceptable for a + * non-privileged client. + * + * For Gen8+ the OA unit no longer supports clock gating off for a + * specific context and the kernel can't securely stop the counters + * from updating as system-wide / global values. Even though we can + * filter reports based on the included context ID we can't block + * clients from seeing the raw / global counter values via + * MI_REPORT_PERF_COUNT commands and so consider it a privileged op to + * enable the OA unit by default. + */ + if (IS_HASWELL(dev_priv) && specific_ctx) + privileged_op = false; + /* Similar to perf's kernel.perf_paranoid_cpu sysctl option * we check a dev.i915.perf_stream_paranoid sysctl option * to determine if it's ok to access system wide OA counters * without CAP_SYS_ADMIN privileges. */ - if (!specific_ctx && + if (privileged_op && i915_perf_stream_paranoid && !capable(CAP_SYS_ADMIN)) { DRM_DEBUG("Insufficient privileges to open system-wide i915 perf stream\n"); ret = -EACCES; @@ -2070,9 +2853,6 @@ int i915_perf_open_ioctl(struct drm_device *dev, void *data, */ void i915_perf_register(struct drm_i915_private *dev_priv) { - if (!IS_HASWELL(dev_priv)) - return; - if (!dev_priv->perf.initialized) return; @@ -2088,11 +2868,38 @@ void i915_perf_register(struct drm_i915_private *dev_priv) if (!dev_priv->perf.metrics_kobj) goto exit; - if (i915_perf_register_sysfs_hsw(dev_priv)) { - kobject_put(dev_priv->perf.metrics_kobj); - dev_priv->perf.metrics_kobj = NULL; + if (IS_HASWELL(dev_priv)) { + if (i915_perf_register_sysfs_hsw(dev_priv)) + goto sysfs_error; + } else if (IS_BROADWELL(dev_priv)) { + if (i915_perf_register_sysfs_bdw(dev_priv)) + goto sysfs_error; + } else if (IS_CHERRYVIEW(dev_priv)) { + if (i915_perf_register_sysfs_chv(dev_priv)) + goto sysfs_error; + } else if (IS_SKYLAKE(dev_priv)) { + if (IS_SKL_GT2(dev_priv)) { + if (i915_perf_register_sysfs_sklgt2(dev_priv)) + goto sysfs_error; + } else if (IS_SKL_GT3(dev_priv)) { + if (i915_perf_register_sysfs_sklgt3(dev_priv)) + goto sysfs_error; + } else if (IS_SKL_GT4(dev_priv)) { + if (i915_perf_register_sysfs_sklgt4(dev_priv)) + goto sysfs_error; + } else + goto sysfs_error; + } else if (IS_BROXTON(dev_priv)) { + if (i915_perf_register_sysfs_bxt(dev_priv)) + goto sysfs_error; } + goto exit; + +sysfs_error: + kobject_put(dev_priv->perf.metrics_kobj); + dev_priv->perf.metrics_kobj = NULL; + exit: mutex_unlock(&dev_priv->perf.lock); } @@ -2108,13 +2915,24 @@ exit: */ void i915_perf_unregister(struct drm_i915_private *dev_priv) { - if (!IS_HASWELL(dev_priv)) - return; - if (!dev_priv->perf.metrics_kobj) return; - i915_perf_unregister_sysfs_hsw(dev_priv); + if (IS_HASWELL(dev_priv)) + i915_perf_unregister_sysfs_hsw(dev_priv); + else if (IS_BROADWELL(dev_priv)) + i915_perf_unregister_sysfs_bdw(dev_priv); + else if (IS_CHERRYVIEW(dev_priv)) + i915_perf_unregister_sysfs_chv(dev_priv); + else if (IS_SKYLAKE(dev_priv)) { + if (IS_SKL_GT2(dev_priv)) + i915_perf_unregister_sysfs_sklgt2(dev_priv); + else if (IS_SKL_GT3(dev_priv)) + i915_perf_unregister_sysfs_sklgt3(dev_priv); + else if (IS_SKL_GT4(dev_priv)) + i915_perf_unregister_sysfs_sklgt4(dev_priv); + } else if (IS_BROXTON(dev_priv)) + i915_perf_unregister_sysfs_bxt(dev_priv); kobject_put(dev_priv->perf.metrics_kobj); dev_priv->perf.metrics_kobj = NULL; @@ -2173,36 +2991,105 @@ static struct ctl_table dev_root[] = { */ void i915_perf_init(struct drm_i915_private *dev_priv) { - if (!IS_HASWELL(dev_priv)) - return; - - hrtimer_init(&dev_priv->perf.oa.poll_check_timer, - CLOCK_MONOTONIC, HRTIMER_MODE_REL); - dev_priv->perf.oa.poll_check_timer.function = oa_poll_check_timer_cb; - init_waitqueue_head(&dev_priv->perf.oa.poll_wq); + dev_priv->perf.oa.n_builtin_sets = 0; + + if (IS_HASWELL(dev_priv)) { + dev_priv->perf.oa.ops.init_oa_buffer = gen7_init_oa_buffer; + dev_priv->perf.oa.ops.enable_metric_set = hsw_enable_metric_set; + dev_priv->perf.oa.ops.disable_metric_set = hsw_disable_metric_set; + dev_priv->perf.oa.ops.oa_enable = gen7_oa_enable; + dev_priv->perf.oa.ops.oa_disable = gen7_oa_disable; + dev_priv->perf.oa.ops.read = gen7_oa_read; + dev_priv->perf.oa.ops.oa_hw_tail_read = + gen7_oa_hw_tail_read; + + dev_priv->perf.oa.oa_formats = hsw_oa_formats; + + dev_priv->perf.oa.n_builtin_sets = + i915_oa_n_builtin_metric_sets_hsw; + } else if (i915.enable_execlists) { + /* Note: that although we could theoretically also support the + * legacy ringbuffer mode on BDW (and earlier iterations of + * this driver, before upstreaming did this) it didn't seem + * worth the complexity to maintain now that BDW+ enable + * execlist mode by default. + */ - INIT_LIST_HEAD(&dev_priv->perf.streams); - mutex_init(&dev_priv->perf.lock); - spin_lock_init(&dev_priv->perf.hook_lock); - spin_lock_init(&dev_priv->perf.oa.oa_buffer.ptr_lock); + if (IS_GEN8(dev_priv)) { + dev_priv->perf.oa.ctx_oactxctrl_offset = 0x120; + dev_priv->perf.oa.ctx_flexeu0_offset = 0x2ce; + dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<25); + + if (IS_BROADWELL(dev_priv)) { + dev_priv->perf.oa.n_builtin_sets = + i915_oa_n_builtin_metric_sets_bdw; + dev_priv->perf.oa.ops.select_metric_set = + i915_oa_select_metric_set_bdw; + } else if (IS_CHERRYVIEW(dev_priv)) { + dev_priv->perf.oa.n_builtin_sets = + i915_oa_n_builtin_metric_sets_chv; + dev_priv->perf.oa.ops.select_metric_set = + i915_oa_select_metric_set_chv; + } + } else if (IS_GEN9(dev_priv)) { + dev_priv->perf.oa.ctx_oactxctrl_offset = 0x128; + dev_priv->perf.oa.ctx_flexeu0_offset = 0x3de; + dev_priv->perf.oa.gen8_valid_ctx_bit = (1<<16); + + if (IS_SKL_GT2(dev_priv)) { + dev_priv->perf.oa.n_builtin_sets = + i915_oa_n_builtin_metric_sets_sklgt2; + dev_priv->perf.oa.ops.select_metric_set = + i915_oa_select_metric_set_sklgt2; + } else if (IS_SKL_GT3(dev_priv)) { + dev_priv->perf.oa.n_builtin_sets = + i915_oa_n_builtin_metric_sets_sklgt3; + dev_priv->perf.oa.ops.select_metric_set = + i915_oa_select_metric_set_sklgt3; + } else if (IS_SKL_GT4(dev_priv)) { + dev_priv->perf.oa.n_builtin_sets = + i915_oa_n_builtin_metric_sets_sklgt4; + dev_priv->perf.oa.ops.select_metric_set = + i915_oa_select_metric_set_sklgt4; + } else if (IS_BROXTON(dev_priv)) { + dev_priv->perf.oa.n_builtin_sets = + i915_oa_n_builtin_metric_sets_bxt; + dev_priv->perf.oa.ops.select_metric_set = + i915_oa_select_metric_set_bxt; + } + } - dev_priv->perf.oa.ops.init_oa_buffer = gen7_init_oa_buffer; - dev_priv->perf.oa.ops.enable_metric_set = hsw_enable_metric_set; - dev_priv->perf.oa.ops.disable_metric_set = hsw_disable_metric_set; - dev_priv->perf.oa.ops.oa_enable = gen7_oa_enable; - dev_priv->perf.oa.ops.oa_disable = gen7_oa_disable; - dev_priv->perf.oa.ops.read = gen7_oa_read; - dev_priv->perf.oa.ops.oa_buffer_check = - gen7_oa_buffer_check_unlocked; + if (dev_priv->perf.oa.n_builtin_sets) { + dev_priv->perf.oa.ops.init_oa_buffer = gen8_init_oa_buffer; + dev_priv->perf.oa.ops.enable_metric_set = + gen8_enable_metric_set; + dev_priv->perf.oa.ops.disable_metric_set = + gen8_disable_metric_set; + dev_priv->perf.oa.ops.oa_enable = gen8_oa_enable; + dev_priv->perf.oa.ops.oa_disable = gen8_oa_disable; + dev_priv->perf.oa.ops.read = gen8_oa_read; + dev_priv->perf.oa.ops.oa_hw_tail_read = + gen8_oa_hw_tail_read; + + dev_priv->perf.oa.oa_formats = gen8_plus_oa_formats; + } + } - dev_priv->perf.oa.oa_formats = hsw_oa_formats; + if (dev_priv->perf.oa.n_builtin_sets) { + hrtimer_init(&dev_priv->perf.oa.poll_check_timer, + CLOCK_MONOTONIC, HRTIMER_MODE_REL); + dev_priv->perf.oa.poll_check_timer.function = oa_poll_check_timer_cb; + init_waitqueue_head(&dev_priv->perf.oa.poll_wq); - dev_priv->perf.oa.n_builtin_sets = - i915_oa_n_builtin_metric_sets_hsw; + INIT_LIST_HEAD(&dev_priv->perf.streams); + mutex_init(&dev_priv->perf.lock); + spin_lock_init(&dev_priv->perf.hook_lock); + spin_lock_init(&dev_priv->perf.oa.oa_buffer.ptr_lock); - dev_priv->perf.sysctl_header = register_sysctl_table(dev_root); + dev_priv->perf.sysctl_header = register_sysctl_table(dev_root); - dev_priv->perf.initialized = true; + dev_priv->perf.initialized = true; + } } /** @@ -2217,5 +3104,6 @@ void i915_perf_fini(struct drm_i915_private *dev_priv) unregister_sysctl_table(dev_priv->perf.sysctl_header); memset(&dev_priv->perf.oa.ops, 0, sizeof(dev_priv->perf.oa.ops)); + dev_priv->perf.initialized = false; } diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 88e4707f571d..bd535f12db18 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -656,6 +656,12 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg) #define GEN8_OACTXID _MMIO(0x2364) +#define GEN8_OA_DEBUG _MMIO(0x2B04) +#define GEN9_OA_DEBUG_DISABLE_CLK_RATIO_REPORTS (1<<5) +#define GEN9_OA_DEBUG_INCLUDE_CLK_RATIO (1<<6) +#define GEN9_OA_DEBUG_DISABLE_GO_1_0_REPORTS (1<<2) +#define GEN9_OA_DEBUG_DISABLE_CTX_SWITCH_REPORTS (1<<1) + #define GEN8_OACONTROL _MMIO(0x2B00) #define GEN8_OA_REPORT_FORMAT_A12 (0<<2) #define GEN8_OA_REPORT_FORMAT_A12_B8_C8 (2<<2) @@ -677,6 +683,7 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg) #define GEN7_OABUFFER_STOP_RESUME_ENABLE (1<<1) #define GEN7_OABUFFER_RESUME (1<<0) +#define GEN8_OABUFFER_UDW _MMIO(0x23b4) #define GEN8_OABUFFER _MMIO(0x2b14) #define GEN7_OASTATUS1 _MMIO(0x2364) @@ -695,7 +702,9 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg) #define GEN8_OASTATUS_REPORT_LOST (1<<0) #define GEN8_OAHEADPTR _MMIO(0x2B0C) +#define GEN8_OAHEADPTR_MASK 0xffffffc0 #define GEN8_OATAILPTR _MMIO(0x2B10) +#define GEN8_OATAILPTR_MASK 0xffffffc0 #define OABUFFER_SIZE_128K (0<<3) #define OABUFFER_SIZE_256K (1<<3) @@ -708,7 +717,17 @@ static inline bool i915_mmio_reg_valid(i915_reg_t reg) #define OA_MEM_SELECT_GGTT (1<<0) +/* + * Flexible, Aggregate EU Counter Registers. + * Note: these aren't contiguous + */ #define EU_PERF_CNTL0 _MMIO(0xe458) +#define EU_PERF_CNTL1 _MMIO(0xe558) +#define EU_PERF_CNTL2 _MMIO(0xe658) +#define EU_PERF_CNTL3 _MMIO(0xe758) +#define EU_PERF_CNTL4 _MMIO(0xe45c) +#define EU_PERF_CNTL5 _MMIO(0xe55c) +#define EU_PERF_CNTL6 _MMIO(0xe65c) #define GDT_CHICKEN_BITS _MMIO(0x9840) #define GT_NOA_ENABLE 0x00000080 @@ -2494,6 +2513,9 @@ enum skl_disp_power_wells { #define GEN8_RC_SEMA_IDLE_MSG_DISABLE (1 << 12) #define GEN8_FF_DOP_CLOCK_GATE_DISABLE (1<<10) +#define GEN6_RCS_PWR_FSM _MMIO(0x22ac) +#define GEN9_RCS_FE_FSM2 _MMIO(0x22a4) + /* Fuse readout registers for GT */ #define CHV_FUSE_GT _MMIO(VLV_DISPLAY_BASE + 0x2168) #define CHV_FGT_DISABLE_SS0 (1 << 10) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index d49dbaa931b5..7404cf2aac28 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1962,6 +1962,8 @@ static void execlists_init_reg_state(u32 *regs, regs[CTX_LRI_HEADER_2] = MI_LOAD_REGISTER_IMM(1); CTX_REG(regs, CTX_R_PWR_CLK_STATE, GEN8_R_PWR_CLK_STATE, make_rpcs(dev_priv)); + + i915_oa_init_reg_state(engine, ctx, regs); } } |