diff options
Diffstat (limited to 'drivers/gpu/drm')
| -rw-r--r-- | drivers/gpu/drm/amd/amdkfd/kfd_process.c | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/nouveau/nouveau_connector.c | 20 | ||||
| -rw-r--r-- | drivers/gpu/drm/nouveau/nouveau_display.c | 33 | ||||
| -rw-r--r-- | drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c | 13 | ||||
| -rw-r--r-- | drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/vc4/vc4_plane.c | 25 |
6 files changed, 64 insertions, 31 deletions
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_process.c b/drivers/gpu/drm/amd/amdkfd/kfd_process.c index 171480bb95d0..6e7eb76189f9 100644 --- a/drivers/gpu/drm/amd/amdkfd/kfd_process.c +++ b/drivers/gpu/drm/amd/amdkfd/kfd_process.c @@ -124,6 +124,8 @@ struct kfd_process *kfd_get_process(const struct task_struct *thread) return ERR_PTR(-EINVAL); process = find_process(thread); + if (!process) + return ERR_PTR(-EINVAL); return process; } diff --git a/drivers/gpu/drm/nouveau/nouveau_connector.c b/drivers/gpu/drm/nouveau/nouveau_connector.c index 365d7691ea48..bbaae946525b 100644 --- a/drivers/gpu/drm/nouveau/nouveau_connector.c +++ b/drivers/gpu/drm/nouveau/nouveau_connector.c @@ -271,12 +271,16 @@ nouveau_connector_detect(struct drm_connector *connector, bool force) nv_connector->edid = NULL; } - /* Outputs are only polled while runtime active, so acquiring a - * runtime PM ref here is unnecessary (and would deadlock upon - * runtime suspend because it waits for polling to finish). + /* Outputs are only polled while runtime active, so resuming the + * device here is unnecessary (and would deadlock upon runtime suspend + * because it waits for polling to finish). We do however, want to + * prevent the autosuspend timer from elapsing during this operation + * if possible. */ - if (!drm_kms_helper_is_poll_worker()) { - ret = pm_runtime_get_sync(connector->dev->dev); + if (drm_kms_helper_is_poll_worker()) { + pm_runtime_get_noresume(dev->dev); + } else { + ret = pm_runtime_get_sync(dev->dev); if (ret < 0 && ret != -EACCES) return conn_status; } @@ -354,10 +358,8 @@ detect_analog: out: - if (!drm_kms_helper_is_poll_worker()) { - pm_runtime_mark_last_busy(connector->dev->dev); - pm_runtime_put_autosuspend(connector->dev->dev); - } + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); return conn_status; } diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 6526a3366087..3ddd4096da2a 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -367,8 +367,6 @@ nouveau_display_hpd_work(struct work_struct *work) pm_runtime_get_sync(drm->dev->dev); drm_helper_hpd_irq_event(drm->dev); - /* enable polling for external displays */ - drm_kms_helper_poll_enable(drm->dev); pm_runtime_mark_last_busy(drm->dev->dev); pm_runtime_put_sync(drm->dev->dev); @@ -391,15 +389,29 @@ nouveau_display_acpi_ntfy(struct notifier_block *nb, unsigned long val, { struct nouveau_drm *drm = container_of(nb, typeof(*drm), acpi_nb); struct acpi_bus_event *info = data; + int ret; if (!strcmp(info->device_class, ACPI_VIDEO_CLASS)) { if (info->type == ACPI_VIDEO_NOTIFY_PROBE) { - /* - * This may be the only indication we receive of a - * connector hotplug on a runtime suspended GPU, - * schedule hpd_work to check. - */ - schedule_work(&drm->hpd_work); + ret = pm_runtime_get(drm->dev->dev); + if (ret == 1 || ret == -EACCES) { + /* If the GPU is already awake, or in a state + * where we can't wake it up, it can handle + * it's own hotplug events. + */ + pm_runtime_put_autosuspend(drm->dev->dev); + } else if (ret == 0) { + /* This may be the only indication we receive + * of a connector hotplug on a runtime + * suspended GPU, schedule hpd_work to check. + */ + NV_DEBUG(drm, "ACPI requested connector reprobe\n"); + schedule_work(&drm->hpd_work); + pm_runtime_put_noidle(drm->dev->dev); + } else { + NV_WARN(drm, "Dropped ACPI reprobe event due to RPM error: %d\n", + ret); + } /* acpi-video should not generate keypresses for this */ return NOTIFY_BAD; @@ -422,6 +434,11 @@ nouveau_display_init(struct drm_device *dev) if (ret) return ret; + /* enable connector detection and polling for connectors without HPD + * support + */ + drm_kms_helper_poll_enable(dev); + /* enable hotplug interrupts */ list_for_each_entry(connector, &dev->mode_config.connector_list, head) { struct nouveau_connector *conn = nouveau_connector(connector); diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c index 9b638bd905ff..d370bf8bc409 100644 --- a/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c +++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/tegra.c @@ -23,6 +23,10 @@ #ifdef CONFIG_NOUVEAU_PLATFORM_DRIVER #include "priv.h" +#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU) +#include <asm/dma-iommu.h> +#endif + static int nvkm_device_tegra_power_up(struct nvkm_device_tegra *tdev) { @@ -95,6 +99,15 @@ nvkm_device_tegra_probe_iommu(struct nvkm_device_tegra *tdev) unsigned long pgsize_bitmap; int ret; +#if IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU) + if (dev->archdata.mapping) { + struct dma_iommu_mapping *mapping = to_dma_iommu_mapping(dev); + + arm_iommu_detach_device(dev); + arm_iommu_release_mapping(mapping); + } +#endif + if (!tdev->func->iommu_bit) return; diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c index a188a3959f1a..6ad827b93ae1 100644 --- a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c +++ b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c @@ -823,7 +823,7 @@ static void s6e8aa0_read_mtp_id(struct s6e8aa0 *ctx) int ret, i; ret = s6e8aa0_dcs_read(ctx, 0xd1, id, ARRAY_SIZE(id)); - if (ret < ARRAY_SIZE(id) || id[0] == 0x00) { + if (ret < 0 || ret < ARRAY_SIZE(id) || id[0] == 0x00) { dev_err(ctx->dev, "read id failed\n"); ctx->error = -EIO; return; diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index 68cf96080e95..24593e534b2e 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -327,6 +327,9 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0], vc4_state->crtc_h); + vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && + vc4_state->y_scaling[0] == VC4_SCALING_NONE); + if (num_planes > 1) { vc4_state->is_yuv = true; @@ -342,24 +345,17 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_get_scaling_mode(vc4_state->src_h[1], vc4_state->crtc_h); - /* YUV conversion requires that scaling be enabled, - * even on a plane that's otherwise 1:1. Choose TPZ - * for simplicity. + /* YUV conversion requires that horizontal scaling be enabled, + * even on a plane that's otherwise 1:1. Looks like only PPF + * works in that case, so let's pick that one. */ - if (vc4_state->x_scaling[0] == VC4_SCALING_NONE) - vc4_state->x_scaling[0] = VC4_SCALING_TPZ; - if (vc4_state->y_scaling[0] == VC4_SCALING_NONE) - vc4_state->y_scaling[0] = VC4_SCALING_TPZ; + if (vc4_state->is_unity) + vc4_state->x_scaling[0] = VC4_SCALING_PPF; } else { vc4_state->x_scaling[1] = VC4_SCALING_NONE; vc4_state->y_scaling[1] = VC4_SCALING_NONE; } - vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && - vc4_state->y_scaling[0] == VC4_SCALING_NONE && - vc4_state->x_scaling[1] == VC4_SCALING_NONE && - vc4_state->y_scaling[1] == VC4_SCALING_NONE); - /* No configuring scaling on the cursor plane, since it gets non-vblank-synced updates, and scaling requires requires LBM changes which have to be vblank-synced. @@ -637,7 +633,10 @@ static int vc4_plane_mode_set(struct drm_plane *plane, vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5); } - if (!vc4_state->is_unity) { + if (vc4_state->x_scaling[0] != VC4_SCALING_NONE || + vc4_state->x_scaling[1] != VC4_SCALING_NONE || + vc4_state->y_scaling[0] != VC4_SCALING_NONE || + vc4_state->y_scaling[1] != VC4_SCALING_NONE) { /* LBM Base Address. */ if (vc4_state->y_scaling[0] != VC4_SCALING_NONE || vc4_state->y_scaling[1] != VC4_SCALING_NONE) { |