summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/abituguru.c2
-rw-r--r--drivers/hwmon/abituguru3.c4
-rw-r--r--drivers/hwmon/acpi_power_meter.c2
-rw-r--r--drivers/hwmon/adm1021.c2
-rw-r--r--drivers/hwmon/ads7828.c4
-rw-r--r--drivers/hwmon/dme1737.c4
-rw-r--r--drivers/hwmon/emc2103.c2
-rw-r--r--drivers/hwmon/it87.c4
-rw-r--r--drivers/hwmon/lm93.c4
-rw-r--r--drivers/hwmon/max1668.c2
-rw-r--r--drivers/hwmon/w83627hf.c2
-rw-r--r--drivers/hwmon/w83781d.c4
-rw-r--r--drivers/hwmon/w83791d.c4
-rw-r--r--drivers/hwmon/w83792d.c2
-rw-r--r--drivers/hwmon/w83793.c2
-rw-r--r--drivers/hwmon/w83795.c2
-rw-r--r--drivers/hwmon/w83l786ng.c2
17 files changed, 24 insertions, 24 deletions
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 65a35cf5b3c5..3b728e8f169b 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -145,7 +145,7 @@ static const u8 abituguru_pwm_max[5] = { 0, 255, 255, 75, 75 };
/* Insmod parameters */
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Set to one to force detection.");
static int bank1_types[ABIT_UGURU_MAX_BANK1_SENSORS] = { -1, -1, -1, -1, -1,
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index d30855a75786..34a14a77e008 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -603,11 +603,11 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = {
/* Insmod parameters */
-static int force;
+static bool force;
module_param(force, bool, 0);
MODULE_PARM_DESC(force, "Set to one to force detection.");
/* Default verbose is 1, since this driver is still in the testing phase */
-static int verbose = 1;
+static bool verbose = 1;
module_param(verbose, bool, 0644);
MODULE_PARM_DESC(verbose, "Enable/disable verbose error reporting");
diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index 522860ab6ce8..554f046bcf20 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -58,7 +58,7 @@ ACPI_MODULE_NAME(ACPI_POWER_METER_NAME);
#define POWER_ALARM_NAME "power1_alarm"
static int cap_in_hardware;
-static int force_cap_on;
+static bool force_cap_on;
static int can_cap_in_hardware(void)
{
diff --git a/drivers/hwmon/adm1021.c b/drivers/hwmon/adm1021.c
index 1ad0a885c5a5..0158cc35cb2e 100644
--- a/drivers/hwmon/adm1021.c
+++ b/drivers/hwmon/adm1021.c
@@ -103,7 +103,7 @@ static int adm1021_remove(struct i2c_client *client);
static struct adm1021_data *adm1021_update_device(struct device *dev);
/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */
-static int read_only;
+static bool read_only;
static const struct i2c_device_id adm1021_id[] = {
diff --git a/drivers/hwmon/ads7828.c b/drivers/hwmon/ads7828.c
index cfcc3b6fb6bf..ed60242d6a0a 100644
--- a/drivers/hwmon/ads7828.c
+++ b/drivers/hwmon/ads7828.c
@@ -48,8 +48,8 @@ static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b,
I2C_CLIENT_END };
/* Module parameters */
-static int se_input = 1; /* Default is SE, 0 == diff */
-static int int_vref = 1; /* Default is internal ref ON */
+static bool se_input = 1; /* Default is SE, 0 == diff */
+static bool int_vref = 1; /* Default is internal ref ON */
static int vref_mv = ADS7828_INT_VREF_MV; /* set if vref != 2.5V */
module_param(se_input, bool, S_IRUGO);
module_param(int_vref, bool, S_IRUGO);
diff --git a/drivers/hwmon/dme1737.c b/drivers/hwmon/dme1737.c
index d9803958e49f..ffb229af7861 100644
--- a/drivers/hwmon/dme1737.c
+++ b/drivers/hwmon/dme1737.c
@@ -45,7 +45,7 @@
static struct platform_device *pdev;
/* Module load parameters */
-static int force_start;
+static bool force_start;
module_param(force_start, bool, 0);
MODULE_PARM_DESC(force_start, "Force the chip to start monitoring inputs");
@@ -53,7 +53,7 @@ static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-static int probe_all_addr;
+static bool probe_all_addr;
module_param(probe_all_addr, bool, 0);
MODULE_PARM_DESC(probe_all_addr, "Include probing of non-standard LPC "
"addresses");
diff --git a/drivers/hwmon/emc2103.c b/drivers/hwmon/emc2103.c
index 848a2b0bc83f..865063914d76 100644
--- a/drivers/hwmon/emc2103.c
+++ b/drivers/hwmon/emc2103.c
@@ -55,7 +55,7 @@ static const u8 REG_TEMP_MAX[4] = { 0x34, 0x30, 0x31, 0x32 };
* it. Default is to leave the device in the state it's already in (-1).
* This parameter allows APD mode to be optionally forced on or off */
static int apd = -1;
-module_param(apd, bool, 0);
+module_param(apd, bint, 0);
MODULE_PARM_DESC(init, "Set to zero to disable anti-parallel diode mode");
struct temperature {
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 38c0b87676de..603ef2af2707 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -146,10 +146,10 @@ static inline void superio_exit(void)
#define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */
/* Update battery voltage after every reading if true */
-static int update_vbat;
+static bool update_vbat;
/* Not all BIOSes properly configure the PWM registers */
-static int fix_pwm_polarity;
+static bool fix_pwm_polarity;
/* Many IT87 constants specified below */
diff --git a/drivers/hwmon/lm93.c b/drivers/hwmon/lm93.c
index 3b43df418613..8bd6c5c9e05b 100644
--- a/drivers/hwmon/lm93.c
+++ b/drivers/hwmon/lm93.c
@@ -151,12 +151,12 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
/* Insmod parameters */
-static int disable_block;
+static bool disable_block;
module_param(disable_block, bool, 0);
MODULE_PARM_DESC(disable_block,
"Set to non-zero to disable SMBus block data transactions.");
-static int init;
+static bool init;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to non-zero to force chip initialization.");
diff --git a/drivers/hwmon/max1668.c b/drivers/hwmon/max1668.c
index 6914195cfd35..88953f99e914 100644
--- a/drivers/hwmon/max1668.c
+++ b/drivers/hwmon/max1668.c
@@ -59,7 +59,7 @@ static unsigned short max1668_addr_list[] = {
#define DEV_ID_MAX1989 0xb
/* read only mode module parameter */
-static int read_only;
+static bool read_only;
module_param(read_only, bool, 0);
MODULE_PARM_DESC(read_only, "Don't set any values, read only mode");
diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c
index bde50e34d013..374118f2b9f9 100644
--- a/drivers/hwmon/w83627hf.c
+++ b/drivers/hwmon/w83627hf.c
@@ -71,7 +71,7 @@ module_param(force_i2c, byte, 0);
MODULE_PARM_DESC(force_i2c,
"Initialize the i2c address of the sensors");
-static int init = 1;
+static bool init = 1;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index 65b685e2c7b7..17a8fa2d9ae9 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -67,11 +67,11 @@ module_param_array(force_subclients, short, NULL, 0);
MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to one to reset chip on load");
-static int init = 1;
+static bool init = 1;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 6e5d0ae594b0..35aa5149307a 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -58,11 +58,11 @@ module_param_array(force_subclients, short, NULL, 0);
MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to one to force a hardware chip reset");
-static int init;
+static bool init;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to one to force extra software initialization");
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 9ded133e43f0..d3100eab6b2f 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -56,7 +56,7 @@ module_param_array(force_subclients, short, NULL, 0);
MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int init;
+static bool init;
module_param(init, bool, 0);
MODULE_PARM_DESC(init, "Set to one to force chip initialization");
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index 3cc6fef22087..45ec7e7c3c27 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -61,7 +61,7 @@ module_param_array(force_subclients, short, NULL, 0);
MODULE_PARM_DESC(force_subclients, "List of subclient addresses: "
"{bus, clientaddr, subclientaddr1, subclientaddr2}");
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c
index 3ee398d0e4c9..aa58b25565bc 100644
--- a/drivers/hwmon/w83795.c
+++ b/drivers/hwmon/w83795.c
@@ -42,7 +42,7 @@ static const unsigned short normal_i2c[] = {
};
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index 0254e181893d..063bd9508d8a 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -39,7 +39,7 @@ static const unsigned short normal_i2c[] = { 0x2e, 0x2f, I2C_CLIENT_END };
/* Insmod parameters */
-static int reset;
+static bool reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-08 07:13:48 +0000