diff options
Diffstat (limited to 'drivers/i2c/chips/lm80.c')
| -rw-r--r-- | drivers/i2c/chips/lm80.c | 601 |
1 files changed, 0 insertions, 601 deletions
diff --git a/drivers/i2c/chips/lm80.c b/drivers/i2c/chips/lm80.c deleted file mode 100644 index 8100595feb44..000000000000 --- a/drivers/i2c/chips/lm80.c +++ /dev/null @@ -1,601 +0,0 @@ -/* - * lm80.c - From lm_sensors, Linux kernel modules for hardware - * monitoring - * Copyright (C) 1998, 1999 Frodo Looijaard <frodol@dds.nl> - * and Philip Edelbrock <phil@netroedge.com> - * - * Ported to Linux 2.6 by Tiago Sousa <mirage@kaotik.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, - 0x2d, 0x2e, 0x2f, I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_1(lm80); - -/* Many LM80 constants specified below */ - -/* The LM80 registers */ -#define LM80_REG_IN_MAX(nr) (0x2a + (nr) * 2) -#define LM80_REG_IN_MIN(nr) (0x2b + (nr) * 2) -#define LM80_REG_IN(nr) (0x20 + (nr)) - -#define LM80_REG_FAN1 0x28 -#define LM80_REG_FAN2 0x29 -#define LM80_REG_FAN_MIN(nr) (0x3b + (nr)) - -#define LM80_REG_TEMP 0x27 -#define LM80_REG_TEMP_HOT_MAX 0x38 -#define LM80_REG_TEMP_HOT_HYST 0x39 -#define LM80_REG_TEMP_OS_MAX 0x3a -#define LM80_REG_TEMP_OS_HYST 0x3b - -#define LM80_REG_CONFIG 0x00 -#define LM80_REG_ALARM1 0x01 -#define LM80_REG_ALARM2 0x02 -#define LM80_REG_MASK1 0x03 -#define LM80_REG_MASK2 0x04 -#define LM80_REG_FANDIV 0x05 -#define LM80_REG_RES 0x06 - - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ - -#define IN_TO_REG(val) (SENSORS_LIMIT(((val)+5)/10,0,255)) -#define IN_FROM_REG(val) ((val)*10) - -static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div) -{ - if (rpm == 0) - return 255; - rpm = SENSORS_LIMIT(rpm, 1, 1000000); - return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254); -} - -#define FAN_FROM_REG(val,div) ((val)==0?-1:\ - (val)==255?0:1350000/((div)*(val))) - -static inline long TEMP_FROM_REG(u16 temp) -{ - long res; - - temp >>= 4; - if (temp < 0x0800) - res = 625 * (long) temp; - else - res = ((long) temp - 0x01000) * 625; - - return res / 10; -} - -#define TEMP_LIMIT_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) - -#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val)<0?\ - ((val)-500)/1000:((val)+500)/1000,0,255) - -#define DIV_FROM_REG(val) (1 << (val)) - -/* - * Client data (each client gets its own) - */ - -struct lm80_data { - struct i2c_client client; - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 in[7]; /* Register value */ - u8 in_max[7]; /* Register value */ - u8 in_min[7]; /* Register value */ - u8 fan[2]; /* Register value */ - u8 fan_min[2]; /* Register value */ - u8 fan_div[2]; /* Register encoding, shifted right */ - u16 temp; /* Register values, shifted right */ - u8 temp_hot_max; /* Register value */ - u8 temp_hot_hyst; /* Register value */ - u8 temp_os_max; /* Register value */ - u8 temp_os_hyst; /* Register value */ - u16 alarms; /* Register encoding, combined */ -}; - -/* - * Functions declaration - */ - -static int lm80_attach_adapter(struct i2c_adapter *adapter); -static int lm80_detect(struct i2c_adapter *adapter, int address, int kind); -static void lm80_init_client(struct i2c_client *client); -static int lm80_detach_client(struct i2c_client *client); -static struct lm80_data *lm80_update_device(struct device *dev); -static int lm80_read_value(struct i2c_client *client, u8 reg); -static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value); - -/* - * Driver data (common to all clients) - */ - -static struct i2c_driver lm80_driver = { - .owner = THIS_MODULE, - .name = "lm80", - .id = I2C_DRIVERID_LM80, - .flags = I2C_DF_NOTIFY, - .attach_adapter = lm80_attach_adapter, - .detach_client = lm80_detach_client, -}; - -/* - * Sysfs stuff - */ - -#define show_in(suffix, value) \ -static ssize_t show_in_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm80_data *data = lm80_update_device(dev); \ - return sprintf(buf, "%d\n", IN_FROM_REG(data->value)); \ -} -show_in(min0, in_min[0]); -show_in(min1, in_min[1]); -show_in(min2, in_min[2]); -show_in(min3, in_min[3]); -show_in(min4, in_min[4]); -show_in(min5, in_min[5]); -show_in(min6, in_min[6]); -show_in(max0, in_max[0]); -show_in(max1, in_max[1]); -show_in(max2, in_max[2]); -show_in(max3, in_max[3]); -show_in(max4, in_max[4]); -show_in(max5, in_max[5]); -show_in(max6, in_max[6]); -show_in(input0, in[0]); -show_in(input1, in[1]); -show_in(input2, in[2]); -show_in(input3, in[3]); -show_in(input4, in[4]); -show_in(input5, in[5]); -show_in(input6, in[6]); - -#define set_in(suffix, value, reg) \ -static ssize_t set_in_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm80_data *data = i2c_get_clientdata(client); \ - long val = simple_strtol(buf, NULL, 10); \ - \ - down(&data->update_lock);\ - data->value = IN_TO_REG(val); \ - lm80_write_value(client, reg, data->value); \ - up(&data->update_lock);\ - return count; \ -} -set_in(min0, in_min[0], LM80_REG_IN_MIN(0)); -set_in(min1, in_min[1], LM80_REG_IN_MIN(1)); -set_in(min2, in_min[2], LM80_REG_IN_MIN(2)); -set_in(min3, in_min[3], LM80_REG_IN_MIN(3)); -set_in(min4, in_min[4], LM80_REG_IN_MIN(4)); -set_in(min5, in_min[5], LM80_REG_IN_MIN(5)); -set_in(min6, in_min[6], LM80_REG_IN_MIN(6)); -set_in(max0, in_max[0], LM80_REG_IN_MAX(0)); -set_in(max1, in_max[1], LM80_REG_IN_MAX(1)); -set_in(max2, in_max[2], LM80_REG_IN_MAX(2)); -set_in(max3, in_max[3], LM80_REG_IN_MAX(3)); -set_in(max4, in_max[4], LM80_REG_IN_MAX(4)); -set_in(max5, in_max[5], LM80_REG_IN_MAX(5)); -set_in(max6, in_max[6], LM80_REG_IN_MAX(6)); - -#define show_fan(suffix, value, div) \ -static ssize_t show_fan_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm80_data *data = lm80_update_device(dev); \ - return sprintf(buf, "%d\n", FAN_FROM_REG(data->value, \ - DIV_FROM_REG(data->div))); \ -} -show_fan(min1, fan_min[0], fan_div[0]); -show_fan(min2, fan_min[1], fan_div[1]); -show_fan(input1, fan[0], fan_div[0]); -show_fan(input2, fan[1], fan_div[1]); - -#define show_fan_div(suffix, value) \ -static ssize_t show_fan_div##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm80_data *data = lm80_update_device(dev); \ - return sprintf(buf, "%d\n", DIV_FROM_REG(data->value)); \ -} -show_fan_div(1, fan_div[0]); -show_fan_div(2, fan_div[1]); - -#define set_fan(suffix, value, reg, div) \ -static ssize_t set_fan_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm80_data *data = i2c_get_clientdata(client); \ - long val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock);\ - data->value = FAN_TO_REG(val, DIV_FROM_REG(data->div)); \ - lm80_write_value(client, reg, data->value); \ - up(&data->update_lock);\ - return count; \ -} -set_fan(min1, fan_min[0], LM80_REG_FAN_MIN(1), fan_div[0]); -set_fan(min2, fan_min[1], LM80_REG_FAN_MIN(2), fan_div[1]); - -/* Note: we save and restore the fan minimum here, because its value is - determined in part by the fan divisor. This follows the principle of - least suprise; the user doesn't expect the fan minimum to change just - because the divisor changed. */ -static ssize_t set_fan_div(struct device *dev, const char *buf, - size_t count, int nr) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm80_data *data = i2c_get_clientdata(client); - unsigned long min, val = simple_strtoul(buf, NULL, 10); - u8 reg; - - /* Save fan_min */ - down(&data->update_lock); - min = FAN_FROM_REG(data->fan_min[nr], - DIV_FROM_REG(data->fan_div[nr])); - - switch (val) { - case 1: data->fan_div[nr] = 0; break; - case 2: data->fan_div[nr] = 1; break; - case 4: data->fan_div[nr] = 2; break; - case 8: data->fan_div[nr] = 3; break; - default: - dev_err(&client->dev, "fan_div value %ld not " - "supported. Choose one of 1, 2, 4 or 8!\n", val); - up(&data->update_lock); - return -EINVAL; - } - - reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1)))) - | (data->fan_div[nr] << (2 * (nr + 1))); - lm80_write_value(client, LM80_REG_FANDIV, reg); - - /* Restore fan_min */ - data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); - lm80_write_value(client, LM80_REG_FAN_MIN(nr + 1), data->fan_min[nr]); - up(&data->update_lock); - - return count; -} - -#define set_fan_div(number) \ -static ssize_t set_fan_div##number(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - return set_fan_div(dev, buf, count, number - 1); \ -} -set_fan_div(1); -set_fan_div(2); - -static ssize_t show_temp_input1(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm80_data *data = lm80_update_device(dev); - return sprintf(buf, "%ld\n", TEMP_FROM_REG(data->temp)); -} - -#define show_temp(suffix, value) \ -static ssize_t show_temp_##suffix(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct lm80_data *data = lm80_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_LIMIT_FROM_REG(data->value)); \ -} -show_temp(hot_max, temp_hot_max); -show_temp(hot_hyst, temp_hot_hyst); -show_temp(os_max, temp_os_max); -show_temp(os_hyst, temp_os_hyst); - -#define set_temp(suffix, value, reg) \ -static ssize_t set_temp_##suffix(struct device *dev, struct device_attribute *attr, const char *buf, \ - size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct lm80_data *data = i2c_get_clientdata(client); \ - long val = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_LIMIT_TO_REG(val); \ - lm80_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} -set_temp(hot_max, temp_hot_max, LM80_REG_TEMP_HOT_MAX); -set_temp(hot_hyst, temp_hot_hyst, LM80_REG_TEMP_HOT_HYST); -set_temp(os_max, temp_os_max, LM80_REG_TEMP_OS_MAX); -set_temp(os_hyst, temp_os_hyst, LM80_REG_TEMP_OS_HYST); - -static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct lm80_data *data = lm80_update_device(dev); - return sprintf(buf, "%u\n", data->alarms); -} - -static DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min0, set_in_min0); -static DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_in_min1, set_in_min1); -static DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_in_min2, set_in_min2); -static DEVICE_ATTR(in3_min, S_IWUSR | S_IRUGO, show_in_min3, set_in_min3); -static DEVICE_ATTR(in4_min, S_IWUSR | S_IRUGO, show_in_min4, set_in_min4); -static DEVICE_ATTR(in5_min, S_IWUSR | S_IRUGO, show_in_min5, set_in_min5); -static DEVICE_ATTR(in6_min, S_IWUSR | S_IRUGO, show_in_min6, set_in_min6); -static DEVICE_ATTR(in0_max, S_IWUSR | S_IRUGO, show_in_max0, set_in_max0); -static DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_in_max1, set_in_max1); -static DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_in_max2, set_in_max2); -static DEVICE_ATTR(in3_max, S_IWUSR | S_IRUGO, show_in_max3, set_in_max3); -static DEVICE_ATTR(in4_max, S_IWUSR | S_IRUGO, show_in_max4, set_in_max4); -static DEVICE_ATTR(in5_max, S_IWUSR | S_IRUGO, show_in_max5, set_in_max5); -static DEVICE_ATTR(in6_max, S_IWUSR | S_IRUGO, show_in_max6, set_in_max6); -static DEVICE_ATTR(in0_input, S_IRUGO, show_in_input0, NULL); -static DEVICE_ATTR(in1_input, S_IRUGO, show_in_input1, NULL); -static DEVICE_ATTR(in2_input, S_IRUGO, show_in_input2, NULL); -static DEVICE_ATTR(in3_input, S_IRUGO, show_in_input3, NULL); -static DEVICE_ATTR(in4_input, S_IRUGO, show_in_input4, NULL); -static DEVICE_ATTR(in5_input, S_IRUGO, show_in_input5, NULL); -static DEVICE_ATTR(in6_input, S_IRUGO, show_in_input6, NULL); -static DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min1, - set_fan_min1); -static DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min2, - set_fan_min2); -static DEVICE_ATTR(fan1_input, S_IRUGO, show_fan_input1, NULL); -static DEVICE_ATTR(fan2_input, S_IRUGO, show_fan_input2, NULL); -static DEVICE_ATTR(fan1_div, S_IWUSR | S_IRUGO, show_fan_div1, set_fan_div1); -static DEVICE_ATTR(fan2_div, S_IWUSR | S_IRUGO, show_fan_div2, set_fan_div2); -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_hot_max, - set_temp_hot_max); -static DEVICE_ATTR(temp1_max_hyst, S_IWUSR | S_IRUGO, show_temp_hot_hyst, - set_temp_hot_hyst); -static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_temp_os_max, - set_temp_os_max); -static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_temp_os_hyst, - set_temp_os_hyst); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - -/* - * Real code - */ - -static int lm80_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, lm80_detect); -} - -int lm80_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i, cur; - struct i2c_client *new_client; - struct lm80_data *data; - int err = 0; - const char *name; - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto exit; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access lm80_{read,write}_value. */ - if (!(data = kmalloc(sizeof(struct lm80_data), GFP_KERNEL))) { - err = -ENOMEM; - goto exit; - } - memset(data, 0, sizeof(struct lm80_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &lm80_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. It is lousy. */ - if (lm80_read_value(new_client, LM80_REG_ALARM2) & 0xc0) - goto error_free; - for (i = 0x2a; i <= 0x3d; i++) { - cur = i2c_smbus_read_byte_data(new_client, i); - if ((i2c_smbus_read_byte_data(new_client, i + 0x40) != cur) - || (i2c_smbus_read_byte_data(new_client, i + 0x80) != cur) - || (i2c_smbus_read_byte_data(new_client, i + 0xc0) != cur)) - goto error_free; - } - - /* Determine the chip type - only one kind supported! */ - kind = lm80; - name = "lm80"; - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, name, I2C_NAME_SIZE); - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto error_free; - - /* Initialize the LM80 chip */ - lm80_init_client(new_client); - - /* A few vars need to be filled upon startup */ - data->fan_min[0] = lm80_read_value(new_client, LM80_REG_FAN_MIN(1)); - data->fan_min[1] = lm80_read_value(new_client, LM80_REG_FAN_MIN(2)); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_in0_min); - device_create_file(&new_client->dev, &dev_attr_in1_min); - device_create_file(&new_client->dev, &dev_attr_in2_min); - device_create_file(&new_client->dev, &dev_attr_in3_min); - device_create_file(&new_client->dev, &dev_attr_in4_min); - device_create_file(&new_client->dev, &dev_attr_in5_min); - device_create_file(&new_client->dev, &dev_attr_in6_min); - device_create_file(&new_client->dev, &dev_attr_in0_max); - device_create_file(&new_client->dev, &dev_attr_in1_max); - device_create_file(&new_client->dev, &dev_attr_in2_max); - device_create_file(&new_client->dev, &dev_attr_in3_max); - device_create_file(&new_client->dev, &dev_attr_in4_max); - device_create_file(&new_client->dev, &dev_attr_in5_max); - device_create_file(&new_client->dev, &dev_attr_in6_max); - device_create_file(&new_client->dev, &dev_attr_in0_input); - device_create_file(&new_client->dev, &dev_attr_in1_input); - device_create_file(&new_client->dev, &dev_attr_in2_input); - device_create_file(&new_client->dev, &dev_attr_in3_input); - device_create_file(&new_client->dev, &dev_attr_in4_input); - device_create_file(&new_client->dev, &dev_attr_in5_input); - device_create_file(&new_client->dev, &dev_attr_in6_input); - device_create_file(&new_client->dev, &dev_attr_fan1_min); - device_create_file(&new_client->dev, &dev_attr_fan2_min); - device_create_file(&new_client->dev, &dev_attr_fan1_input); - device_create_file(&new_client->dev, &dev_attr_fan2_input); - device_create_file(&new_client->dev, &dev_attr_fan1_div); - device_create_file(&new_client->dev, &dev_attr_fan2_div); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_max_hyst); - device_create_file(&new_client->dev, &dev_attr_temp1_crit); - device_create_file(&new_client->dev, &dev_attr_temp1_crit_hyst); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -error_free: - kfree(data); -exit: - return err; -} - -static int lm80_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, " - "client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -static int lm80_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static int lm80_write_value(struct i2c_client *client, u8 reg, u8 value) -{ - return i2c_smbus_write_byte_data(client, reg, value); -} - -/* Called when we have found a new LM80. */ -static void lm80_init_client(struct i2c_client *client) -{ - /* Reset all except Watchdog values and last conversion values - This sets fan-divs to 2, among others. This makes most other - initializations unnecessary */ - lm80_write_value(client, LM80_REG_CONFIG, 0x80); - /* Set 11-bit temperature resolution */ - lm80_write_value(client, LM80_REG_RES, 0x08); - - /* Start monitoring */ - lm80_write_value(client, LM80_REG_CONFIG, 0x01); -} - -static struct lm80_data *lm80_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct lm80_data *data = i2c_get_clientdata(client); - int i; - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) { - dev_dbg(&client->dev, "Starting lm80 update\n"); - for (i = 0; i <= 6; i++) { - data->in[i] = - lm80_read_value(client, LM80_REG_IN(i)); - data->in_min[i] = - lm80_read_value(client, LM80_REG_IN_MIN(i)); - data->in_max[i] = - lm80_read_value(client, LM80_REG_IN_MAX(i)); - } - data->fan[0] = lm80_read_value(client, LM80_REG_FAN1); - data->fan_min[0] = - lm80_read_value(client, LM80_REG_FAN_MIN(1)); - data->fan[1] = lm80_read_value(client, LM80_REG_FAN2); - data->fan_min[1] = - lm80_read_value(client, LM80_REG_FAN_MIN(2)); - - data->temp = - (lm80_read_value(client, LM80_REG_TEMP) << 8) | - (lm80_read_value(client, LM80_REG_RES) & 0xf0); - data->temp_os_max = - lm80_read_value(client, LM80_REG_TEMP_OS_MAX); - data->temp_os_hyst = - lm80_read_value(client, LM80_REG_TEMP_OS_HYST); - data->temp_hot_max = - lm80_read_value(client, LM80_REG_TEMP_HOT_MAX); - data->temp_hot_hyst = - lm80_read_value(client, LM80_REG_TEMP_HOT_HYST); - - i = lm80_read_value(client, LM80_REG_FANDIV); - data->fan_div[0] = (i >> 2) & 0x03; - data->fan_div[1] = (i >> 4) & 0x03; - data->alarms = lm80_read_value(client, LM80_REG_ALARM1) + - (lm80_read_value(client, LM80_REG_ALARM2) << 8); - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_lm80_init(void) -{ - return i2c_add_driver(&lm80_driver); -} - -static void __exit sensors_lm80_exit(void) -{ - i2c_del_driver(&lm80_driver); -} - -MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " - "Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("LM80 driver"); -MODULE_LICENSE("GPL"); - -module_init(sensors_lm80_init); -module_exit(sensors_lm80_exit); |