summaryrefslogtreecommitdiff
path: root/drivers/i2c/chips/w83781d.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/chips/w83781d.c')
-rw-r--r--drivers/i2c/chips/w83781d.c1664
1 files changed, 1664 insertions, 0 deletions
diff --git a/drivers/i2c/chips/w83781d.c b/drivers/i2c/chips/w83781d.c
new file mode 100644
index 000000000000..4954e465c419
--- /dev/null
+++ b/drivers/i2c/chips/w83781d.c
@@ -0,0 +1,1664 @@
+/*
+ w83781d.c - Part of lm_sensors, Linux kernel modules for hardware
+ monitoring
+ Copyright (c) 1998 - 2001 Frodo Looijaard <frodol@dds.nl>,
+ Philip Edelbrock <phil@netroedge.com>,
+ and Mark Studebaker <mdsxyz123@yahoo.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ Supports following chips:
+
+ Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+ as99127f 7 3 0 3 0x31 0x12c3 yes no
+ as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
+ w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
+ w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
+ w83627thf 9 3 2 3 0x90 0x5ca3 no yes(LPC)
+ w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
+ w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
+ w83697hf 8 2 2 2 0x60 0x5ca3 no yes(LPC)
+
+*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+#include <asm/io.h>
+#include "lm75.h"
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25,
+ 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b,
+ 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { 0x0290, I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_6(w83781d, w83782d, w83783s, w83627hf, as99127f, w83697hf);
+I2C_CLIENT_MODULE_PARM(force_subclients, "List of subclient addresses: "
+ "{bus, clientaddr, subclientaddr1, subclientaddr2}");
+
+static int init = 1;
+module_param(init, bool, 0);
+MODULE_PARM_DESC(init, "Set to zero to bypass chip initialization");
+
+/* Constants specified below */
+
+/* Length of ISA address segment */
+#define W83781D_EXTENT 8
+
+/* Where are the ISA address/data registers relative to the base address */
+#define W83781D_ADDR_REG_OFFSET 5
+#define W83781D_DATA_REG_OFFSET 6
+
+/* The W83781D registers */
+/* The W83782D registers for nr=7,8 are in bank 5 */
+#define W83781D_REG_IN_MAX(nr) ((nr < 7) ? (0x2b + (nr) * 2) : \
+ (0x554 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN_MIN(nr) ((nr < 7) ? (0x2c + (nr) * 2) : \
+ (0x555 + (((nr) - 7) * 2)))
+#define W83781D_REG_IN(nr) ((nr < 7) ? (0x20 + (nr)) : \
+ (0x550 + (nr) - 7))
+
+#define W83781D_REG_FAN_MIN(nr) (0x3a + (nr))
+#define W83781D_REG_FAN(nr) (0x27 + (nr))
+
+#define W83781D_REG_BANK 0x4E
+#define W83781D_REG_TEMP2_CONFIG 0x152
+#define W83781D_REG_TEMP3_CONFIG 0x252
+#define W83781D_REG_TEMP(nr) ((nr == 3) ? (0x0250) : \
+ ((nr == 2) ? (0x0150) : \
+ (0x27)))
+#define W83781D_REG_TEMP_HYST(nr) ((nr == 3) ? (0x253) : \
+ ((nr == 2) ? (0x153) : \
+ (0x3A)))
+#define W83781D_REG_TEMP_OVER(nr) ((nr == 3) ? (0x255) : \
+ ((nr == 2) ? (0x155) : \
+ (0x39)))
+
+#define W83781D_REG_CONFIG 0x40
+#define W83781D_REG_ALARM1 0x41
+#define W83781D_REG_ALARM2 0x42
+#define W83781D_REG_ALARM3 0x450 /* not on W83781D */
+
+#define W83781D_REG_IRQ 0x4C
+#define W83781D_REG_BEEP_CONFIG 0x4D
+#define W83781D_REG_BEEP_INTS1 0x56
+#define W83781D_REG_BEEP_INTS2 0x57
+#define W83781D_REG_BEEP_INTS3 0x453 /* not on W83781D */
+
+#define W83781D_REG_VID_FANDIV 0x47
+
+#define W83781D_REG_CHIPID 0x49
+#define W83781D_REG_WCHIPID 0x58
+#define W83781D_REG_CHIPMAN 0x4F
+#define W83781D_REG_PIN 0x4B
+
+/* 782D/783S only */
+#define W83781D_REG_VBAT 0x5D
+
+/* PWM 782D (1-4) and 783S (1-2) only */
+#define W83781D_REG_PWM1 0x5B /* 782d and 783s/627hf datasheets disagree */
+ /* on which is which; */
+#define W83781D_REG_PWM2 0x5A /* We follow the 782d convention here, */
+ /* However 782d is probably wrong. */
+#define W83781D_REG_PWM3 0x5E
+#define W83781D_REG_PWM4 0x5F
+#define W83781D_REG_PWMCLK12 0x5C
+#define W83781D_REG_PWMCLK34 0x45C
+static const u8 regpwm[] = { W83781D_REG_PWM1, W83781D_REG_PWM2,
+ W83781D_REG_PWM3, W83781D_REG_PWM4
+};
+
+#define W83781D_REG_PWM(nr) (regpwm[(nr) - 1])
+
+#define W83781D_REG_I2C_ADDR 0x48
+#define W83781D_REG_I2C_SUBADDR 0x4A
+
+/* The following are undocumented in the data sheets however we
+ received the information in an email from Winbond tech support */
+/* Sensor selection - not on 781d */
+#define W83781D_REG_SCFG1 0x5D
+static const u8 BIT_SCFG1[] = { 0x02, 0x04, 0x08 };
+
+#define W83781D_REG_SCFG2 0x59
+static const u8 BIT_SCFG2[] = { 0x10, 0x20, 0x40 };
+
+#define W83781D_DEFAULT_BETA 3435
+
+/* RT Table registers */
+#define W83781D_REG_RT_IDX 0x50
+#define W83781D_REG_RT_VAL 0x51
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG
+ variants. Note that you should be a bit careful with which arguments
+ these macros are called: arguments may be evaluated more than once.
+ Fixing this is just not worth it. */
+#define IN_TO_REG(val) (SENSORS_LIMIT((((val) * 10 + 8)/16),0,255))
+#define IN_FROM_REG(val) (((val) * 16) / 10)
+
+static inline u8
+FAN_TO_REG(long rpm, int div)
+{
+ if (rpm == 0)
+ return 255;
+ rpm = SENSORS_LIMIT(rpm, 1, 1000000);
+ return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
+}
+
+#define FAN_FROM_REG(val,div) ((val) == 0 ? -1 : \
+ ((val) == 255 ? 0 : \
+ 1350000 / ((val) * (div))))
+
+#define TEMP_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
+ : (val)) / 1000, 0, 0xff))
+#define TEMP_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
+
+#define ALARMS_FROM_REG(val) (val)
+#define PWM_FROM_REG(val) (val)
+#define PWM_TO_REG(val) (SENSORS_LIMIT((val),0,255))
+#define BEEP_MASK_FROM_REG(val,type) ((type) == as99127f ? \
+ (val) ^ 0x7fff : (val))
+#define BEEP_MASK_TO_REG(val,type) ((type) == as99127f ? \
+ (~(val)) & 0x7fff : (val) & 0xffffff)
+
+#define BEEP_ENABLE_TO_REG(val) ((val) ? 1 : 0)
+#define BEEP_ENABLE_FROM_REG(val) ((val) ? 1 : 0)
+
+#define DIV_FROM_REG(val) (1 << (val))
+
+static inline u8
+DIV_TO_REG(long val, enum chips type)
+{
+ int i;
+ val = SENSORS_LIMIT(val, 1,
+ ((type == w83781d
+ || type == as99127f) ? 8 : 128)) >> 1;
+ for (i = 0; i < 6; i++) {
+ if (val == 0)
+ break;
+ val >>= 1;
+ }
+ return ((u8) i);
+}
+
+/* There are some complications in a module like this. First off, W83781D chips
+ may be both present on the SMBus and the ISA bus, and we have to handle
+ those cases separately at some places. Second, there might be several
+ W83781D chips available (well, actually, that is probably never done; but
+ it is a clean illustration of how to handle a case like that). Finally,
+ a specific chip may be attached to *both* ISA and SMBus, and we would
+ not like to detect it double. Fortunately, in the case of the W83781D at
+ least, a register tells us what SMBus address we are on, so that helps
+ a bit - except if there could be more than one SMBus. Groan. No solution
+ for this yet. */
+
+/* This module may seem overly long and complicated. In fact, it is not so
+ bad. Quite a lot of bookkeeping is done. A real driver can often cut
+ some corners. */
+
+/* For each registered W83781D, we need to keep some data in memory. That
+ data is pointed to by w83781d_list[NR]->data. The structure itself is
+ dynamically allocated, at the same time when a new w83781d client is
+ allocated. */
+struct w83781d_data {
+ struct i2c_client client;
+ struct semaphore lock;
+ enum chips type;
+
+ struct semaphore update_lock;
+ char valid; /* !=0 if following fields are valid */
+ unsigned long last_updated; /* In jiffies */
+
+ struct i2c_client *lm75[2]; /* for secondary I2C addresses */
+ /* array of 2 pointers to subclients */
+
+ u8 in[9]; /* Register value - 8 & 9 for 782D only */
+ u8 in_max[9]; /* Register value - 8 & 9 for 782D only */
+ u8 in_min[9]; /* Register value - 8 & 9 for 782D only */
+ u8 fan[3]; /* Register value */
+ u8 fan_min[3]; /* Register value */
+ u8 temp;
+ u8 temp_max; /* Register value */
+ u8 temp_max_hyst; /* Register value */
+ u16 temp_add[2]; /* Register value */
+ u16 temp_max_add[2]; /* Register value */
+ u16 temp_max_hyst_add[2]; /* Register value */
+ u8 fan_div[3]; /* Register encoding, shifted right */
+ u8 vid; /* Register encoding, combined */
+ u32 alarms; /* Register encoding, combined */
+ u32 beep_mask; /* Register encoding, combined */
+ u8 beep_enable; /* Boolean */
+ u8 pwm[4]; /* Register value */
+ u8 pwmenable[4]; /* Boolean */
+ u16 sens[3]; /* 782D/783S only.
+ 1 = pentium diode; 2 = 3904 diode;
+ 3000-5000 = thermistor beta.
+ Default = 3435.
+ Other Betas unimplemented */
+ u8 vrm;
+};
+
+static int w83781d_attach_adapter(struct i2c_adapter *adapter);
+static int w83781d_detect(struct i2c_adapter *adapter, int address, int kind);
+static int w83781d_detach_client(struct i2c_client *client);
+
+static int w83781d_read_value(struct i2c_client *client, u16 register);
+static int w83781d_write_value(struct i2c_client *client, u16 register,
+ u16 value);
+static struct w83781d_data *w83781d_update_device(struct device *dev);
+static void w83781d_init_client(struct i2c_client *client);
+
+static struct i2c_driver w83781d_driver = {
+ .owner = THIS_MODULE,
+ .name = "w83781d",
+ .id = I2C_DRIVERID_W83781D,
+ .flags = I2C_DF_NOTIFY,
+ .attach_adapter = w83781d_attach_adapter,
+ .detach_client = w83781d_detach_client,
+};
+
+/* following are the sysfs callback functions */
+#define show_in_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+ struct w83781d_data *data = w83781d_update_device(dev); \
+ return sprintf(buf,"%ld\n", (long)IN_FROM_REG(data->reg[nr] * 10)); \
+}
+show_in_reg(in);
+show_in_reg(in_min);
+show_in_reg(in_max);
+
+#define store_in_reg(REG, reg) \
+static ssize_t store_in_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct w83781d_data *data = i2c_get_clientdata(client); \
+ u32 val; \
+ \
+ val = simple_strtoul(buf, NULL, 10) / 10; \
+ \
+ down(&data->update_lock); \
+ data->in_##reg[nr] = IN_TO_REG(val); \
+ w83781d_write_value(client, W83781D_REG_IN_##REG(nr), data->in_##reg[nr]); \
+ \
+ up(&data->update_lock); \
+ return count; \
+}
+store_in_reg(MIN, min);
+store_in_reg(MAX, max);
+
+#define sysfs_in_offset(offset) \
+static ssize_t \
+show_regs_in_##offset (struct device *dev, char *buf) \
+{ \
+ return show_in(dev, buf, offset); \
+} \
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_regs_in_##offset, NULL);
+
+#define sysfs_in_reg_offset(reg, offset) \
+static ssize_t show_regs_in_##reg##offset (struct device *dev, char *buf) \
+{ \
+ return show_in_##reg (dev, buf, offset); \
+} \
+static ssize_t store_regs_in_##reg##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+ return store_in_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(in##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_in_##reg##offset, store_regs_in_##reg##offset);
+
+#define sysfs_in_offsets(offset) \
+sysfs_in_offset(offset); \
+sysfs_in_reg_offset(min, offset); \
+sysfs_in_reg_offset(max, offset);
+
+sysfs_in_offsets(0);
+sysfs_in_offsets(1);
+sysfs_in_offsets(2);
+sysfs_in_offsets(3);
+sysfs_in_offsets(4);
+sysfs_in_offsets(5);
+sysfs_in_offsets(6);
+sysfs_in_offsets(7);
+sysfs_in_offsets(8);
+
+#define device_create_file_in(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_in##offset##_input); \
+device_create_file(&client->dev, &dev_attr_in##offset##_min); \
+device_create_file(&client->dev, &dev_attr_in##offset##_max); \
+} while (0)
+
+#define show_fan_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+ struct w83781d_data *data = w83781d_update_device(dev); \
+ return sprintf(buf,"%ld\n", \
+ FAN_FROM_REG(data->reg[nr-1], (long)DIV_FROM_REG(data->fan_div[nr-1]))); \
+}
+show_fan_reg(fan);
+show_fan_reg(fan_min);
+
+static ssize_t
+store_fan_min(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->fan_min[nr - 1] =
+ FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr - 1]));
+ w83781d_write_value(client, W83781D_REG_FAN_MIN(nr),
+ data->fan_min[nr - 1]);
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_fan_offset(offset) \
+static ssize_t show_regs_fan_##offset (struct device *dev, char *buf) \
+{ \
+ return show_fan(dev, buf, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_regs_fan_##offset, NULL);
+
+#define sysfs_fan_min_offset(offset) \
+static ssize_t show_regs_fan_min##offset (struct device *dev, char *buf) \
+{ \
+ return show_fan_min(dev, buf, offset); \
+} \
+static ssize_t store_regs_fan_min##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+ return store_fan_min(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, show_regs_fan_min##offset, store_regs_fan_min##offset);
+
+sysfs_fan_offset(1);
+sysfs_fan_min_offset(1);
+sysfs_fan_offset(2);
+sysfs_fan_min_offset(2);
+sysfs_fan_offset(3);
+sysfs_fan_min_offset(3);
+
+#define device_create_file_fan(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_input); \
+device_create_file(&client->dev, &dev_attr_fan##offset##_min); \
+} while (0)
+
+#define show_temp_reg(reg) \
+static ssize_t show_##reg (struct device *dev, char *buf, int nr) \
+{ \
+ struct w83781d_data *data = w83781d_update_device(dev); \
+ if (nr >= 2) { /* TEMP2 and TEMP3 */ \
+ return sprintf(buf,"%d\n", \
+ LM75_TEMP_FROM_REG(data->reg##_add[nr-2])); \
+ } else { /* TEMP1 */ \
+ return sprintf(buf,"%ld\n", (long)TEMP_FROM_REG(data->reg)); \
+ } \
+}
+show_temp_reg(temp);
+show_temp_reg(temp_max);
+show_temp_reg(temp_max_hyst);
+
+#define store_temp_reg(REG, reg) \
+static ssize_t store_temp_##reg (struct device *dev, const char *buf, size_t count, int nr) \
+{ \
+ struct i2c_client *client = to_i2c_client(dev); \
+ struct w83781d_data *data = i2c_get_clientdata(client); \
+ s32 val; \
+ \
+ val = simple_strtol(buf, NULL, 10); \
+ \
+ down(&data->update_lock); \
+ \
+ if (nr >= 2) { /* TEMP2 and TEMP3 */ \
+ data->temp_##reg##_add[nr-2] = LM75_TEMP_TO_REG(val); \
+ w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+ data->temp_##reg##_add[nr-2]); \
+ } else { /* TEMP1 */ \
+ data->temp_##reg = TEMP_TO_REG(val); \
+ w83781d_write_value(client, W83781D_REG_TEMP_##REG(nr), \
+ data->temp_##reg); \
+ } \
+ \
+ up(&data->update_lock); \
+ return count; \
+}
+store_temp_reg(OVER, max);
+store_temp_reg(HYST, max_hyst);
+
+#define sysfs_temp_offset(offset) \
+static ssize_t \
+show_regs_temp_##offset (struct device *dev, char *buf) \
+{ \
+ return show_temp(dev, buf, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_regs_temp_##offset, NULL);
+
+#define sysfs_temp_reg_offset(reg, offset) \
+static ssize_t show_regs_temp_##reg##offset (struct device *dev, char *buf) \
+{ \
+ return show_temp_##reg (dev, buf, offset); \
+} \
+static ssize_t store_regs_temp_##reg##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+ return store_temp_##reg (dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_##reg, S_IRUGO| S_IWUSR, show_regs_temp_##reg##offset, store_regs_temp_##reg##offset);
+
+#define sysfs_temp_offsets(offset) \
+sysfs_temp_offset(offset); \
+sysfs_temp_reg_offset(max, offset); \
+sysfs_temp_reg_offset(max_hyst, offset);
+
+sysfs_temp_offsets(1);
+sysfs_temp_offsets(2);
+sysfs_temp_offsets(3);
+
+#define device_create_file_temp(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_input); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max); \
+device_create_file(&client->dev, &dev_attr_temp##offset##_max_hyst); \
+} while (0)
+
+static ssize_t
+show_vid_reg(struct device *dev, char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+
+static
+DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+#define device_create_file_vid(client) \
+device_create_file(&client->dev, &dev_attr_cpu0_vid);
+static ssize_t
+show_vrm_reg(struct device *dev, char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+
+static ssize_t
+store_vrm_reg(struct device *dev, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+ data->vrm = val;
+
+ return count;
+}
+
+static
+DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+#define device_create_file_vrm(client) \
+device_create_file(&client->dev, &dev_attr_vrm);
+static ssize_t
+show_alarms_reg(struct device *dev, char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) ALARMS_FROM_REG(data->alarms));
+}
+
+static
+DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+#define device_create_file_alarms(client) \
+device_create_file(&client->dev, &dev_attr_alarms);
+static ssize_t show_beep_mask (struct device *dev, char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n",
+ (long)BEEP_MASK_FROM_REG(data->beep_mask, data->type));
+}
+static ssize_t show_beep_enable (struct device *dev, char *buf)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n",
+ (long)BEEP_ENABLE_FROM_REG(data->beep_enable));
+}
+
+#define BEEP_ENABLE 0 /* Store beep_enable */
+#define BEEP_MASK 1 /* Store beep_mask */
+
+static ssize_t
+store_beep_reg(struct device *dev, const char *buf, size_t count,
+ int update_mask)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ u32 val, val2;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ if (update_mask == BEEP_MASK) { /* We are storing beep_mask */
+ data->beep_mask = BEEP_MASK_TO_REG(val, data->type);
+ w83781d_write_value(client, W83781D_REG_BEEP_INTS1,
+ data->beep_mask & 0xff);
+
+ if ((data->type != w83781d) && (data->type != as99127f)) {
+ w83781d_write_value(client, W83781D_REG_BEEP_INTS3,
+ ((data->beep_mask) >> 16) & 0xff);
+ }
+
+ val2 = (data->beep_mask >> 8) & 0x7f;
+ } else { /* We are storing beep_enable */
+ val2 = w83781d_read_value(client, W83781D_REG_BEEP_INTS2) & 0x7f;
+ data->beep_enable = BEEP_ENABLE_TO_REG(val);
+ }
+
+ w83781d_write_value(client, W83781D_REG_BEEP_INTS2,
+ val2 | data->beep_enable << 7);
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_beep(REG, reg) \
+static ssize_t show_regs_beep_##reg (struct device *dev, char *buf) \
+{ \
+ return show_beep_##reg(dev, buf); \
+} \
+static ssize_t store_regs_beep_##reg (struct device *dev, const char *buf, size_t count) \
+{ \
+ return store_beep_reg(dev, buf, count, BEEP_##REG); \
+} \
+static DEVICE_ATTR(beep_##reg, S_IRUGO | S_IWUSR, show_regs_beep_##reg, store_regs_beep_##reg);
+
+sysfs_beep(ENABLE, enable);
+sysfs_beep(MASK, mask);
+
+#define device_create_file_beep(client) \
+do { \
+device_create_file(&client->dev, &dev_attr_beep_enable); \
+device_create_file(&client->dev, &dev_attr_beep_mask); \
+} while (0)
+
+static ssize_t
+show_fan_div_reg(struct device *dev, char *buf, int nr)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n",
+ (long) DIV_FROM_REG(data->fan_div[nr - 1]));
+}
+
+/* Note: we save and restore the fan minimum here, because its value is
+ determined in part by the fan divisor. This follows the principle of
+ least suprise; the user doesn't expect the fan minimum to change just
+ because the divisor changed. */
+static ssize_t
+store_fan_div_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ unsigned long min;
+ u8 reg;
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ /* Save fan_min */
+ min = FAN_FROM_REG(data->fan_min[nr],
+ DIV_FROM_REG(data->fan_div[nr]));
+
+ data->fan_div[nr] = DIV_TO_REG(val, data->type);
+
+ reg = (w83781d_read_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV)
+ & (nr==0 ? 0xcf : 0x3f))
+ | ((data->fan_div[nr] & 0x03) << (nr==0 ? 4 : 6));
+ w83781d_write_value(client, nr==2 ? W83781D_REG_PIN : W83781D_REG_VID_FANDIV, reg);
+
+ /* w83781d and as99127f don't have extended divisor bits */
+ if (data->type != w83781d && data->type != as99127f) {
+ reg = (w83781d_read_value(client, W83781D_REG_VBAT)
+ & ~(1 << (5 + nr)))
+ | ((data->fan_div[nr] & 0x04) << (3 + nr));
+ w83781d_write_value(client, W83781D_REG_VBAT, reg);
+ }
+
+ /* Restore fan_min */
+ data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr]));
+ w83781d_write_value(client, W83781D_REG_FAN_MIN(nr+1), data->fan_min[nr]);
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_fan_div(offset) \
+static ssize_t show_regs_fan_div_##offset (struct device *dev, char *buf) \
+{ \
+ return show_fan_div_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_fan_div_##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+ return store_fan_div_reg(dev, buf, count, offset - 1); \
+} \
+static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, show_regs_fan_div_##offset, store_regs_fan_div_##offset);
+
+sysfs_fan_div(1);
+sysfs_fan_div(2);
+sysfs_fan_div(3);
+
+#define device_create_file_fan_div(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_fan##offset##_div); \
+} while (0)
+
+static ssize_t
+show_pwm_reg(struct device *dev, char *buf, int nr)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) PWM_FROM_REG(data->pwm[nr - 1]));
+}
+
+static ssize_t
+show_pwmenable_reg(struct device *dev, char *buf, int nr)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->pwmenable[nr - 1]);
+}
+
+static ssize_t
+store_pwm_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ u32 val;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+ data->pwm[nr - 1] = PWM_TO_REG(val);
+ w83781d_write_value(client, W83781D_REG_PWM(nr), data->pwm[nr - 1]);
+ up(&data->update_lock);
+ return count;
+}
+
+static ssize_t
+store_pwmenable_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ u32 val, reg;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ switch (val) {
+ case 0:
+ case 1:
+ reg = w83781d_read_value(client, W83781D_REG_PWMCLK12);
+ w83781d_write_value(client, W83781D_REG_PWMCLK12,
+ (reg & 0xf7) | (val << 3));
+
+ reg = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
+ w83781d_write_value(client, W83781D_REG_BEEP_CONFIG,
+ (reg & 0xef) | (!val << 4));
+
+ data->pwmenable[nr - 1] = val;
+ break;
+
+ default:
+ up(&data->update_lock);
+ return -EINVAL;
+ }
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_pwm(offset) \
+static ssize_t show_regs_pwm_##offset (struct device *dev, char *buf) \
+{ \
+ return show_pwm_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_pwm_##offset (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return store_pwm_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \
+ show_regs_pwm_##offset, store_regs_pwm_##offset);
+
+#define sysfs_pwmenable(offset) \
+static ssize_t show_regs_pwmenable_##offset (struct device *dev, char *buf) \
+{ \
+ return show_pwmenable_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_pwmenable_##offset (struct device *dev, \
+ const char *buf, size_t count) \
+{ \
+ return store_pwmenable_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \
+ show_regs_pwmenable_##offset, store_regs_pwmenable_##offset);
+
+sysfs_pwm(1);
+sysfs_pwm(2);
+sysfs_pwmenable(2); /* only PWM2 can be enabled/disabled */
+sysfs_pwm(3);
+sysfs_pwm(4);
+
+#define device_create_file_pwm(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset); \
+} while (0)
+
+#define device_create_file_pwmenable(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_pwm##offset##_enable); \
+} while (0)
+
+static ssize_t
+show_sensor_reg(struct device *dev, char *buf, int nr)
+{
+ struct w83781d_data *data = w83781d_update_device(dev);
+ return sprintf(buf, "%ld\n", (long) data->sens[nr - 1]);
+}
+
+static ssize_t
+store_sensor_reg(struct device *dev, const char *buf, size_t count, int nr)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ u32 val, tmp;
+
+ val = simple_strtoul(buf, NULL, 10);
+
+ down(&data->update_lock);
+
+ switch (val) {
+ case 1: /* PII/Celeron diode */
+ tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+ w83781d_write_value(client, W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr - 1]);
+ tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
+ w83781d_write_value(client, W83781D_REG_SCFG2,
+ tmp | BIT_SCFG2[nr - 1]);
+ data->sens[nr - 1] = val;
+ break;
+ case 2: /* 3904 */
+ tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+ w83781d_write_value(client, W83781D_REG_SCFG1,
+ tmp | BIT_SCFG1[nr - 1]);
+ tmp = w83781d_read_value(client, W83781D_REG_SCFG2);
+ w83781d_write_value(client, W83781D_REG_SCFG2,
+ tmp & ~BIT_SCFG2[nr - 1]);
+ data->sens[nr - 1] = val;
+ break;
+ case W83781D_DEFAULT_BETA: /* thermistor */
+ tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+ w83781d_write_value(client, W83781D_REG_SCFG1,
+ tmp & ~BIT_SCFG1[nr - 1]);
+ data->sens[nr - 1] = val;
+ break;
+ default:
+ dev_err(dev, "Invalid sensor type %ld; must be 1, 2, or %d\n",
+ (long) val, W83781D_DEFAULT_BETA);
+ break;
+ }
+
+ up(&data->update_lock);
+ return count;
+}
+
+#define sysfs_sensor(offset) \
+static ssize_t show_regs_sensor_##offset (struct device *dev, char *buf) \
+{ \
+ return show_sensor_reg(dev, buf, offset); \
+} \
+static ssize_t store_regs_sensor_##offset (struct device *dev, const char *buf, size_t count) \
+{ \
+ return store_sensor_reg(dev, buf, count, offset); \
+} \
+static DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, show_regs_sensor_##offset, store_regs_sensor_##offset);
+
+sysfs_sensor(1);
+sysfs_sensor(2);
+sysfs_sensor(3);
+
+#define device_create_file_sensor(client, offset) \
+do { \
+device_create_file(&client->dev, &dev_attr_temp##offset##_type); \
+} while (0)
+
+/* This function is called when:
+ * w83781d_driver is inserted (when this module is loaded), for each
+ available adapter
+ * when a new adapter is inserted (and w83781d_driver is still present) */
+static int
+w83781d_attach_adapter(struct i2c_adapter *adapter)
+{
+ if (!(adapter->class & I2C_CLASS_HWMON))
+ return 0;
+ return i2c_detect(adapter, &addr_data, w83781d_detect);
+}
+
+/* Assumes that adapter is of I2C, not ISA variety.
+ * OTHERWISE DON'T CALL THIS
+ */
+static int
+w83781d_detect_subclients(struct i2c_adapter *adapter, int address, int kind,
+ struct i2c_client *new_client)
+{
+ int i, val1 = 0, id;
+ int err;
+ const char *client_name = "";
+ struct w83781d_data *data = i2c_get_clientdata(new_client);
+
+ data->lm75[0] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (!(data->lm75[0])) {
+ err = -ENOMEM;
+ goto ERROR_SC_0;
+ }
+ memset(data->lm75[0], 0x00, sizeof (struct i2c_client));
+
+ id = i2c_adapter_id(adapter);
+
+ if (force_subclients[0] == id && force_subclients[1] == address) {
+ for (i = 2; i <= 3; i++) {
+ if (force_subclients[i] < 0x48 ||
+ force_subclients[i] > 0x4f) {
+ dev_err(&new_client->dev, "Invalid subclient "
+ "address %d; must be 0x48-0x4f\n",
+ force_subclients[i]);
+ err = -EINVAL;
+ goto ERROR_SC_1;
+ }
+ }
+ w83781d_write_value(new_client, W83781D_REG_I2C_SUBADDR,
+ (force_subclients[2] & 0x07) |
+ ((force_subclients[3] & 0x07) << 4));
+ data->lm75[0]->addr = force_subclients[2];
+ } else {
+ val1 = w83781d_read_value(new_client, W83781D_REG_I2C_SUBADDR);
+ data->lm75[0]->addr = 0x48 + (val1 & 0x07);
+ }
+
+ if (kind != w83783s) {
+
+ data->lm75[1] = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
+ if (!(data->lm75[1])) {
+ err = -ENOMEM;
+ goto ERROR_SC_1;
+ }
+ memset(data->lm75[1], 0x0, sizeof(struct i2c_client));
+
+ if (force_subclients[0] == id &&
+ force_subclients[1] == address) {
+ data->lm75[1]->addr = force_subclients[3];
+ } else {
+ data->lm75[1]->addr = 0x48 + ((val1 >> 4) & 0x07);
+ }
+ if (data->lm75[0]->addr == data->lm75[1]->addr) {
+ dev_err(&new_client->dev,
+ "Duplicate addresses 0x%x for subclients.\n",
+ data->lm75[0]->addr);
+ err = -EBUSY;
+ goto ERROR_SC_2;
+ }
+ }
+
+ if (kind == w83781d)
+ client_name = "w83781d subclient";
+ else if (kind == w83782d)
+ client_name = "w83782d subclient";
+ else if (kind == w83783s)
+ client_name = "w83783s subclient";
+ else if (kind == w83627hf)
+ client_name = "w83627hf subclient";
+ else if (kind == as99127f)
+ client_name = "as99127f subclient";
+
+ for (i = 0; i <= 1; i++) {
+ /* store all data in w83781d */
+ i2c_set_clientdata(data->lm75[i], NULL);
+ data->lm75[i]->adapter = adapter;
+ data->lm75[i]->driver = &w83781d_driver;
+ data->lm75[i]->flags = 0;
+ strlcpy(data->lm75[i]->name, client_name,
+ I2C_NAME_SIZE);
+ if ((err = i2c_attach_client(data->lm75[i]))) {
+ dev_err(&new_client->dev, "Subclient %d "
+ "registration at address 0x%x "
+ "failed.\n", i, data->lm75[i]->addr);
+ if (i == 1)
+ goto ERROR_SC_3;
+ goto ERROR_SC_2;
+ }
+ if (kind == w83783s)
+ break;
+ }
+
+ return 0;
+
+/* Undo inits in case of errors */
+ERROR_SC_3:
+ i2c_detach_client(data->lm75[0]);
+ERROR_SC_2:
+ if (NULL != data->lm75[1])
+ kfree(data->lm75[1]);
+ERROR_SC_1:
+ if (NULL != data->lm75[0])
+ kfree(data->lm75[0]);
+ERROR_SC_0:
+ return err;
+}
+
+static int
+w83781d_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+ int i = 0, val1 = 0, val2;
+ struct i2c_client *new_client;
+ struct w83781d_data *data;
+ int err;
+ const char *client_name = "";
+ int is_isa = i2c_is_isa_adapter(adapter);
+ enum vendor { winbond, asus } vendid;
+
+ if (!is_isa
+ && !i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ err = -EINVAL;
+ goto ERROR0;
+ }
+
+ /* Prevent users from forcing a kind for a bus it isn't supposed
+ to possibly be on */
+ if (is_isa && (kind == as99127f || kind == w83783s)) {
+ dev_err(&adapter->dev,
+ "Cannot force I2C-only chip for ISA address 0x%02x.\n",
+ address);
+ err = -EINVAL;
+ goto ERROR0;
+ }
+ if (!is_isa && kind == w83697hf) {
+ dev_err(&adapter->dev,
+ "Cannot force ISA-only chip for I2C address 0x%02x.\n",
+ address);
+ err = -EINVAL;
+ goto ERROR0;
+ }
+
+ if (is_isa)
+ if (!request_region(address, W83781D_EXTENT,
+ w83781d_driver.name)) {
+ dev_dbg(&adapter->dev, "Request of region "
+ "0x%x-0x%x for w83781d failed\n", address,
+ address + W83781D_EXTENT - 1);
+ err = -EBUSY;
+ goto ERROR0;
+ }
+
+ /* Probe whether there is anything available on this address. Already
+ done for SMBus clients */
+ if (kind < 0) {
+ if (is_isa) {
+
+#define REALLY_SLOW_IO
+ /* We need the timeouts for at least some LM78-like
+ chips. But only if we read 'undefined' registers. */
+ i = inb_p(address + 1);
+ if (inb_p(address + 2) != i
+ || inb_p(address + 3) != i
+ || inb_p(address + 7) != i) {
+ dev_dbg(&adapter->dev, "Detection of w83781d "
+ "chip failed at step 1\n");
+ err = -ENODEV;
+ goto ERROR1;
+ }
+#undef REALLY_SLOW_IO
+
+ /* Let's just hope nothing breaks here */
+ i = inb_p(address + 5) & 0x7f;
+ outb_p(~i & 0x7f, address + 5);
+ val2 = inb_p(address + 5) & 0x7f;
+ if (val2 != (~i & 0x7f)) {
+ outb_p(i, address + 5);
+ dev_dbg(&adapter->dev, "Detection of w83781d "
+ "chip failed at step 2 (0x%x != "
+ "0x%x at 0x%x)\n", val2, ~i & 0x7f,
+ address + 5);
+ err = -ENODEV;
+ goto ERROR1;
+ }
+ }
+ }
+
+ /* OK. For now, we presume we have a valid client. We now create the
+ client structure, even though we cannot fill it completely yet.
+ But it allows us to access w83781d_{read,write}_value. */
+
+ if (!(data = kmalloc(sizeof(struct w83781d_data), GFP_KERNEL))) {
+ err = -ENOMEM;
+ goto ERROR1;
+ }
+ memset(data, 0, sizeof(struct w83781d_data));
+
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
+ new_client->addr = address;
+ init_MUTEX(&data->lock);
+ new_client->adapter = adapter;
+ new_client->driver = &w83781d_driver;
+ new_client->flags = 0;
+
+ /* Now, we do the remaining detection. */
+
+ /* The w8378?d may be stuck in some other bank than bank 0. This may
+ make reading other information impossible. Specify a force=... or
+ force_*=... parameter, and the Winbond will be reset to the right
+ bank. */
+ if (kind < 0) {
+ if (w83781d_read_value(new_client, W83781D_REG_CONFIG) & 0x80) {
+ dev_dbg(&new_client->dev, "Detection failed at step "
+ "3\n");
+ err = -ENODEV;
+ goto ERROR2;
+ }
+ val1 = w83781d_read_value(new_client, W83781D_REG_BANK);
+ val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+ /* Check for Winbond or Asus ID if in bank 0 */
+ if ((!(val1 & 0x07)) &&
+ (((!(val1 & 0x80)) && (val2 != 0xa3) && (val2 != 0xc3))
+ || ((val1 & 0x80) && (val2 != 0x5c) && (val2 != 0x12)))) {
+ dev_dbg(&new_client->dev, "Detection failed at step "
+ "4\n");
+ err = -ENODEV;
+ goto ERROR2;
+ }
+ /* If Winbond SMBus, check address at 0x48.
+ Asus doesn't support, except for as99127f rev.2 */
+ if ((!is_isa) && (((!(val1 & 0x80)) && (val2 == 0xa3)) ||
+ ((val1 & 0x80) && (val2 == 0x5c)))) {
+ if (w83781d_read_value
+ (new_client, W83781D_REG_I2C_ADDR) != address) {
+ dev_dbg(&new_client->dev, "Detection failed "
+ "at step 5\n");
+ err = -ENODEV;
+ goto ERROR2;
+ }
+ }
+ }
+
+ /* We have either had a force parameter, or we have already detected the
+ Winbond. Put it now into bank 0 and Vendor ID High Byte */
+ w83781d_write_value(new_client, W83781D_REG_BANK,
+ (w83781d_read_value(new_client,
+ W83781D_REG_BANK) & 0x78) |
+ 0x80);
+
+ /* Determine the chip type. */
+ if (kind <= 0) {
+ /* get vendor ID */
+ val2 = w83781d_read_value(new_client, W83781D_REG_CHIPMAN);
+ if (val2 == 0x5c)
+ vendid = winbond;
+ else if (val2 == 0x12)
+ vendid = asus;
+ else {
+ dev_dbg(&new_client->dev, "Chip was made by neither "
+ "Winbond nor Asus?\n");
+ err = -ENODEV;
+ goto ERROR2;
+ }
+
+ val1 = w83781d_read_value(new_client, W83781D_REG_WCHIPID);
+ if ((val1 == 0x10 || val1 == 0x11) && vendid == winbond)
+ kind = w83781d;
+ else if (val1 == 0x30 && vendid == winbond)
+ kind = w83782d;
+ else if (val1 == 0x40 && vendid == winbond && !is_isa
+ && address == 0x2d)
+ kind = w83783s;
+ else if ((val1 == 0x21 || val1 == 0x90) && vendid == winbond)
+ kind = w83627hf;
+ else if (val1 == 0x31 && !is_isa && address >= 0x28)
+ kind = as99127f;
+ else if (val1 == 0x60 && vendid == winbond && is_isa)
+ kind = w83697hf;
+ else {
+ if (kind == 0)
+ dev_warn(&new_client->dev, "Ignoring 'force' "
+ "parameter for unknown chip at "
+ "adapter %d, address 0x%02x\n",
+ i2c_adapter_id(adapter), address);
+ err = -EINVAL;
+ goto ERROR2;
+ }
+ }
+
+ if (kind == w83781d) {
+ client_name = "w83781d";
+ } else if (kind == w83782d) {
+ client_name = "w83782d";
+ } else if (kind == w83783s) {
+ client_name = "w83783s";
+ } else if (kind == w83627hf) {
+ if (val1 == 0x90)
+ client_name = "w83627thf";
+ else
+ client_name = "w83627hf";
+ } else if (kind == as99127f) {
+ client_name = "as99127f";
+ } else if (kind == w83697hf) {
+ client_name = "w83697hf";
+ }
+
+ /* Fill in the remaining client fields and put into the global list */
+ strlcpy(new_client->name, client_name, I2C_NAME_SIZE);
+ data->type = kind;
+
+ data->valid = 0;
+ init_MUTEX(&data->update_lock);
+
+ /* Tell the I2C layer a new client has arrived */
+ if ((err = i2c_attach_client(new_client)))
+ goto ERROR2;
+
+ /* attach secondary i2c lm75-like clients */
+ if (!is_isa) {
+ if ((err = w83781d_detect_subclients(adapter, address,
+ kind, new_client)))
+ goto ERROR3;
+ } else {
+ data->lm75[0] = NULL;
+ data->lm75[1] = NULL;
+ }
+
+ /* Initialize the chip */
+ w83781d_init_client(new_client);
+
+ /* A few vars need to be filled upon startup */
+ for (i = 1; i <= 3; i++) {
+ data->fan_min[i - 1] = w83781d_read_value(new_client,
+ W83781D_REG_FAN_MIN(i));
+ }
+ if (kind != w83781d && kind != as99127f)
+ for (i = 0; i < 4; i++)
+ data->pwmenable[i] = 1;
+
+ /* Register sysfs hooks */
+ device_create_file_in(new_client, 0);
+ if (kind != w83783s && kind != w83697hf)
+ device_create_file_in(new_client, 1);
+ device_create_file_in(new_client, 2);
+ device_create_file_in(new_client, 3);
+ device_create_file_in(new_client, 4);
+ device_create_file_in(new_client, 5);
+ device_create_file_in(new_client, 6);
+ if (kind != as99127f && kind != w83781d && kind != w83783s) {
+ device_create_file_in(new_client, 7);
+ device_create_file_in(new_client, 8);
+ }
+
+ device_create_file_fan(new_client, 1);
+ device_create_file_fan(new_client, 2);
+ if (kind != w83697hf)
+ device_create_file_fan(new_client, 3);
+
+ device_create_file_temp(new_client, 1);
+ device_create_file_temp(new_client, 2);
+ if (kind != w83783s && kind != w83697hf)
+ device_create_file_temp(new_client, 3);
+
+ if (kind != w83697hf)
+ device_create_file_vid(new_client);
+
+ if (kind != w83697hf)
+ device_create_file_vrm(new_client);
+
+ device_create_file_fan_div(new_client, 1);
+ device_create_file_fan_div(new_client, 2);
+ if (kind != w83697hf)
+ device_create_file_fan_div(new_client, 3);
+
+ device_create_file_alarms(new_client);
+
+ device_create_file_beep(new_client);
+
+ if (kind != w83781d && kind != as99127f) {
+ device_create_file_pwm(new_client, 1);
+ device_create_file_pwm(new_client, 2);
+ device_create_file_pwmenable(new_client, 2);
+ }
+ if (kind == w83782d && !is_isa) {
+ device_create_file_pwm(new_client, 3);
+ device_create_file_pwm(new_client, 4);
+ }
+
+ if (kind != as99127f && kind != w83781d) {
+ device_create_file_sensor(new_client, 1);
+ device_create_file_sensor(new_client, 2);
+ if (kind != w83783s && kind != w83697hf)
+ device_create_file_sensor(new_client, 3);
+ }
+
+ return 0;
+
+ERROR3:
+ i2c_detach_client(new_client);
+ERROR2:
+ kfree(data);
+ERROR1:
+ if (is_isa)
+ release_region(address, W83781D_EXTENT);
+ERROR0:
+ return err;
+}
+
+static int
+w83781d_detach_client(struct i2c_client *client)
+{
+ int err;
+
+ if (i2c_is_isa_client(client))
+ release_region(client->addr, W83781D_EXTENT);
+
+ if ((err = i2c_detach_client(client))) {
+ dev_err(&client->dev,
+ "Client deregistration failed, client not detached.\n");
+ return err;
+ }
+
+ if (i2c_get_clientdata(client)==NULL) {
+ /* subclients */
+ kfree(client);
+ } else {
+ /* main client */
+ kfree(i2c_get_clientdata(client));
+ }
+
+ return 0;
+}
+
+/* The SMBus locks itself, usually, but nothing may access the Winbond between
+ bank switches. ISA access must always be locked explicitly!
+ We ignore the W83781D BUSY flag at this moment - it could lead to deadlocks,
+ would slow down the W83781D access and should not be necessary.
+ There are some ugly typecasts here, but the good news is - they should
+ nowhere else be necessary! */
+static int
+w83781d_read_value(struct i2c_client *client, u16 reg)
+{
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ int res, word_sized, bank;
+ struct i2c_client *cl;
+
+ down(&data->lock);
+ if (i2c_is_isa_client(client)) {
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x50)
+ || ((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+ res = inb_p(client->addr + W83781D_DATA_REG_OFFSET);
+ if (word_sized) {
+ outb_p((reg & 0xff) + 1,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ res =
+ (res << 8) + inb_p(client->addr +
+ W83781D_DATA_REG_OFFSET);
+ }
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ } else {
+ bank = (reg >> 8) & 0x0f;
+ if (bank > 2)
+ /* switch banks */
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ bank);
+ if (bank == 0 || bank > 2) {
+ res = i2c_smbus_read_byte_data(client, reg & 0xff);
+ } else {
+ /* switch to subclient */
+ cl = data->lm75[bank - 1];
+ /* convert from ISA to LM75 I2C addresses */
+ switch (reg & 0xff) {
+ case 0x50: /* TEMP */
+ res = swab16(i2c_smbus_read_word_data(cl, 0));
+ break;
+ case 0x52: /* CONFIG */
+ res = i2c_smbus_read_byte_data(cl, 1);
+ break;
+ case 0x53: /* HYST */
+ res = swab16(i2c_smbus_read_word_data(cl, 2));
+ break;
+ case 0x55: /* OVER */
+ default:
+ res = swab16(i2c_smbus_read_word_data(cl, 3));
+ break;
+ }
+ }
+ if (bank > 2)
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+ }
+ up(&data->lock);
+ return res;
+}
+
+static int
+w83781d_write_value(struct i2c_client *client, u16 reg, u16 value)
+{
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ int word_sized, bank;
+ struct i2c_client *cl;
+
+ down(&data->lock);
+ if (i2c_is_isa_client(client)) {
+ word_sized = (((reg & 0xff00) == 0x100)
+ || ((reg & 0xff00) == 0x200))
+ && (((reg & 0x00ff) == 0x53)
+ || ((reg & 0x00ff) == 0x55));
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(reg >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ outb_p(reg & 0xff, client->addr + W83781D_ADDR_REG_OFFSET);
+ if (word_sized) {
+ outb_p(value >> 8,
+ client->addr + W83781D_DATA_REG_OFFSET);
+ outb_p((reg & 0xff) + 1,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ }
+ outb_p(value & 0xff, client->addr + W83781D_DATA_REG_OFFSET);
+ if (reg & 0xff00) {
+ outb_p(W83781D_REG_BANK,
+ client->addr + W83781D_ADDR_REG_OFFSET);
+ outb_p(0, client->addr + W83781D_DATA_REG_OFFSET);
+ }
+ } else {
+ bank = (reg >> 8) & 0x0f;
+ if (bank > 2)
+ /* switch banks */
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK,
+ bank);
+ if (bank == 0 || bank > 2) {
+ i2c_smbus_write_byte_data(client, reg & 0xff,
+ value & 0xff);
+ } else {
+ /* switch to subclient */
+ cl = data->lm75[bank - 1];
+ /* convert from ISA to LM75 I2C addresses */
+ switch (reg & 0xff) {
+ case 0x52: /* CONFIG */
+ i2c_smbus_write_byte_data(cl, 1, value & 0xff);
+ break;
+ case 0x53: /* HYST */
+ i2c_smbus_write_word_data(cl, 2, swab16(value));
+ break;
+ case 0x55: /* OVER */
+ i2c_smbus_write_word_data(cl, 3, swab16(value));
+ break;
+ }
+ }
+ if (bank > 2)
+ i2c_smbus_write_byte_data(client, W83781D_REG_BANK, 0);
+ }
+ up(&data->lock);
+ return 0;
+}
+
+/* Called when we have found a new W83781D. It should set limits, etc. */
+static void
+w83781d_init_client(struct i2c_client *client)
+{
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ int i, p;
+ int type = data->type;
+ u8 tmp;
+
+ if (init && type != as99127f) { /* this resets registers we don't have
+ documentation for on the as99127f */
+ /* save these registers */
+ i = w83781d_read_value(client, W83781D_REG_BEEP_CONFIG);
+ p = w83781d_read_value(client, W83781D_REG_PWMCLK12);
+ /* Reset all except Watchdog values and last conversion values
+ This sets fan-divs to 2, among others */
+ w83781d_write_value(client, W83781D_REG_CONFIG, 0x80);
+ /* Restore the registers and disable power-on abnormal beep.
+ This saves FAN 1/2/3 input/output values set by BIOS. */
+ w83781d_write_value(client, W83781D_REG_BEEP_CONFIG, i | 0x80);
+ w83781d_write_value(client, W83781D_REG_PWMCLK12, p);
+ /* Disable master beep-enable (reset turns it on).
+ Individual beep_mask should be reset to off but for some reason
+ disabling this bit helps some people not get beeped */
+ w83781d_write_value(client, W83781D_REG_BEEP_INTS2, 0);
+ }
+
+ data->vrm = i2c_which_vrm();
+
+ if ((type != w83781d) && (type != as99127f)) {
+ tmp = w83781d_read_value(client, W83781D_REG_SCFG1);
+ for (i = 1; i <= 3; i++) {
+ if (!(tmp & BIT_SCFG1[i - 1])) {
+ data->sens[i - 1] = W83781D_DEFAULT_BETA;
+ } else {
+ if (w83781d_read_value
+ (client,
+ W83781D_REG_SCFG2) & BIT_SCFG2[i - 1])
+ data->sens[i - 1] = 1;
+ else
+ data->sens[i - 1] = 2;
+ }
+ if ((type == w83783s || type == w83697hf) && (i == 2))
+ break;
+ }
+ }
+
+ if (init && type != as99127f) {
+ /* Enable temp2 */
+ tmp = w83781d_read_value(client, W83781D_REG_TEMP2_CONFIG);
+ if (tmp & 0x01) {
+ dev_warn(&client->dev, "Enabling temp2, readings "
+ "might not make sense\n");
+ w83781d_write_value(client, W83781D_REG_TEMP2_CONFIG,
+ tmp & 0xfe);
+ }
+
+ /* Enable temp3 */
+ if (type != w83783s && type != w83697hf) {
+ tmp = w83781d_read_value(client,
+ W83781D_REG_TEMP3_CONFIG);
+ if (tmp & 0x01) {
+ dev_warn(&client->dev, "Enabling temp3, "
+ "readings might not make sense\n");
+ w83781d_write_value(client,
+ W83781D_REG_TEMP3_CONFIG, tmp & 0xfe);
+ }
+ }
+
+ if (type != w83781d) {
+ /* enable comparator mode for temp2 and temp3 so
+ alarm indication will work correctly */
+ i = w83781d_read_value(client, W83781D_REG_IRQ);
+ if (!(i & 0x40))
+ w83781d_write_value(client, W83781D_REG_IRQ,
+ i | 0x40);
+ }
+ }
+
+ /* Start monitoring */
+ w83781d_write_value(client, W83781D_REG_CONFIG,
+ (w83781d_read_value(client,
+ W83781D_REG_CONFIG) & 0xf7)
+ | 0x01);
+}
+
+static struct w83781d_data *w83781d_update_device(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct w83781d_data *data = i2c_get_clientdata(client);
+ int i;
+
+ down(&data->update_lock);
+
+ if (time_after(jiffies, data->last_updated + HZ + HZ / 2)
+ || !data->valid) {
+ dev_dbg(dev, "Starting device update\n");
+
+ for (i = 0; i <= 8; i++) {
+ if ((data->type == w83783s || data->type == w83697hf)
+ && (i == 1))
+ continue; /* 783S has no in1 */
+ data->in[i] =
+ w83781d_read_value(client, W83781D_REG_IN(i));
+ data->in_min[i] =
+ w83781d_read_value(client, W83781D_REG_IN_MIN(i));
+ data->in_max[i] =
+ w83781d_read_value(client, W83781D_REG_IN_MAX(i));
+ if ((data->type != w83782d) && (data->type != w83697hf)
+ && (data->type != w83627hf) && (i == 6))
+ break;
+ }
+ for (i = 1; i <= 3; i++) {
+ data->fan[i - 1] =
+ w83781d_read_value(client, W83781D_REG_FAN(i));
+ data->fan_min[i - 1] =
+ w83781d_read_value(client, W83781D_REG_FAN_MIN(i));
+ }
+ if (data->type != w83781d && data->type != as99127f) {
+ for (i = 1; i <= 4; i++) {
+ data->pwm[i - 1] =
+ w83781d_read_value(client,
+ W83781D_REG_PWM(i));
+ if ((data->type != w83782d
+ || i2c_is_isa_client(client))
+ && i == 2)
+ break;
+ }
+ /* Only PWM2 can be disabled */
+ data->pwmenable[1] = (w83781d_read_value(client,
+ W83781D_REG_PWMCLK12) & 0x08) >> 3;
+ }
+
+ data->temp = w83781d_read_value(client, W83781D_REG_TEMP(1));
+ data->temp_max =
+ w83781d_read_value(client, W83781D_REG_TEMP_OVER(1));
+ data->temp_max_hyst =
+ w83781d_read_value(client, W83781D_REG_TEMP_HYST(1));
+ data->temp_add[0] =
+ w83781d_read_value(client, W83781D_REG_TEMP(2));
+ data->temp_max_add[0] =
+ w83781d_read_value(client, W83781D_REG_TEMP_OVER(2));
+ data->temp_max_hyst_add[0] =
+ w83781d_read_value(client, W83781D_REG_TEMP_HYST(2));
+ if (data->type != w83783s && data->type != w83697hf) {
+ data->temp_add[1] =
+ w83781d_read_value(client, W83781D_REG_TEMP(3));
+ data->temp_max_add[1] =
+ w83781d_read_value(client,
+ W83781D_REG_TEMP_OVER(3));
+ data->temp_max_hyst_add[1] =
+ w83781d_read_value(client,
+ W83781D_REG_TEMP_HYST(3));
+ }
+ i = w83781d_read_value(client, W83781D_REG_VID_FANDIV);
+ if (data->type != w83697hf) {
+ data->vid = i & 0x0f;
+ data->vid |=
+ (w83781d_read_value(client, W83781D_REG_CHIPID) &
+ 0x01)
+ << 4;
+ }
+ data->fan_div[0] = (i >> 4) & 0x03;
+ data->fan_div[1] = (i >> 6) & 0x03;
+ if (data->type != w83697hf) {
+ data->fan_div[2] = (w83781d_read_value(client,
+ W83781D_REG_PIN)
+ >> 6) & 0x03;
+ }
+ if ((data->type != w83781d) && (data->type != as99127f)) {
+ i = w83781d_read_value(client, W83781D_REG_VBAT);
+ data->fan_div[0] |= (i >> 3) & 0x04;
+ data->fan_div[1] |= (i >> 4) & 0x04;
+ if (data->type != w83697hf)
+ data->fan_div[2] |= (i >> 5) & 0x04;
+ }
+ data->alarms =
+ w83781d_read_value(client,
+ W83781D_REG_ALARM1) +
+ (w83781d_read_value(client, W83781D_REG_ALARM2) << 8);
+ if ((data->type == w83782d) || (data->type == w83627hf)) {
+ data->alarms |=
+ w83781d_read_value(client,
+ W83781D_REG_ALARM3) << 16;
+ }
+ i = w83781d_read_value(client, W83781D_REG_BEEP_INTS2);
+ data->beep_enable = i >> 7;
+ data->beep_mask = ((i & 0x7f) << 8) +
+ w83781d_read_value(client, W83781D_REG_BEEP_INTS1);
+ if ((data->type != w83781d) && (data->type != as99127f)) {
+ data->beep_mask |=
+ w83781d_read_value(client,
+ W83781D_REG_BEEP_INTS3) << 16;
+ }
+ data->last_updated = jiffies;
+ data->valid = 1;
+ }
+
+ up(&data->update_lock);
+
+ return data;
+}
+
+static int __init
+sensors_w83781d_init(void)
+{
+ return i2c_add_driver(&w83781d_driver);
+}
+
+static void __exit
+sensors_w83781d_exit(void)
+{
+ i2c_del_driver(&w83781d_driver);
+}
+
+MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
+ "Philip Edelbrock <phil@netroedge.com>, "
+ "and Mark Studebaker <mdsxyz123@yahoo.com>");
+MODULE_DESCRIPTION("W83781D driver");
+MODULE_LICENSE("GPL");
+
+module_init(sensors_w83781d_init);
+module_exit(sensors_w83781d_exit);
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 19:33:54 +0000