diff options
Diffstat (limited to 'drivers/ide/pci/hpt366.c')
-rw-r--r-- | drivers/ide/pci/hpt366.c | 85 |
1 files changed, 35 insertions, 50 deletions
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c index cf9d344d19f8..fcbc5605b38e 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/pci/hpt366.c @@ -514,43 +514,31 @@ static int check_in_drive_list(ide_drive_t *drive, const char **list) return 0; } -static u8 hpt3xx_ratemask(ide_drive_t *drive) -{ - struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); - u8 mode = info->max_mode; - - if (!eighty_ninty_three(drive) && mode) - mode = min(mode, (u8)1); - return mode; -} - /* * Note for the future; the SATA hpt37x we must set * either PIO or UDMA modes 0,4,5 */ - -static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) + +static u8 hpt3xx_udma_filter(ide_drive_t *drive) { struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev); u8 chip_type = info->chip_type; - u8 mode = hpt3xx_ratemask(drive); - - if (drive->media != ide_disk) - return min(speed, (u8)XFER_PIO_4); + u8 mode = info->max_mode; + u8 mask; switch (mode) { case 0x04: - speed = min_t(u8, speed, XFER_UDMA_6); + mask = 0x7f; break; case 0x03: - speed = min_t(u8, speed, XFER_UDMA_5); + mask = 0x3f; if (chip_type >= HPT374) break; if (!check_in_drive_list(drive, bad_ata100_5)) goto check_bad_ata33; /* fall thru */ case 0x02: - speed = min_t(u8, speed, XFER_UDMA_4); + mask = 0x1f; /* * CHECK ME, Does this need to be changed to HPT374 ?? @@ -561,13 +549,13 @@ static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) !check_in_drive_list(drive, bad_ata66_4)) goto check_bad_ata33; - speed = min_t(u8, speed, XFER_UDMA_3); + mask = 0x0f; if (HPT366_ALLOW_ATA66_3 && !check_in_drive_list(drive, bad_ata66_3)) goto check_bad_ata33; /* fall thru */ case 0x01: - speed = min_t(u8, speed, XFER_UDMA_2); + mask = 0x07; check_bad_ata33: if (chip_type >= HPT370A) @@ -577,10 +565,10 @@ static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed) /* fall thru */ case 0x00: default: - speed = min_t(u8, speed, XFER_MW_DMA_2); + mask = 0x00; break; } - return speed; + return mask; } static u32 get_speed_setting(u8 speed, struct hpt_info *info) @@ -608,12 +596,19 @@ static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; struct hpt_info *info = pci_get_drvdata(dev); - u8 speed = hpt3xx_ratefilter(drive, xferspeed); + u8 speed = ide_rate_filter(drive, xferspeed); u8 itr_addr = drive->dn ? 0x44 : 0x40; - u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : - (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); - u32 new_itr = get_speed_setting(speed, info); u32 old_itr = 0; + u32 itr_mask, new_itr; + + /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ + if (drive->media != ide_disk) + speed = min_t(u8, speed, XFER_PIO_4); + + itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 : + (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff); + + new_itr = get_speed_setting(speed, info); /* * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well) @@ -633,12 +628,19 @@ static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed) ide_hwif_t *hwif = HWIF(drive); struct pci_dev *dev = hwif->pci_dev; struct hpt_info *info = pci_get_drvdata(dev); - u8 speed = hpt3xx_ratefilter(drive, xferspeed); + u8 speed = ide_rate_filter(drive, xferspeed); u8 itr_addr = 0x40 + (drive->dn * 4); - u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : - (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); - u32 new_itr = get_speed_setting(speed, info); u32 old_itr = 0; + u32 itr_mask, new_itr; + + /* TODO: move this to ide_rate_filter() [ check ->atapi_dma ] */ + if (drive->media != ide_disk) + speed = min_t(u8, speed, XFER_PIO_4); + + itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 : + (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff); + + new_itr = get_speed_setting(speed, info); pci_read_config_dword(dev, itr_addr, &old_itr); new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask); @@ -667,24 +669,6 @@ static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio) (void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio); } -/* - * This allows the configuration of ide_pci chipset registers - * for cards that learn about the drive's UDMA, DMA, PIO capabilities - * after the drive is reported by the OS. Initially designed for - * HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc. - * - */ -static int config_chipset_for_dma(ide_drive_t *drive) -{ - u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive)); - - if (!speed) - return 0; - - (void) hpt3xx_tune_chipset(drive, speed); - return ide_dma_enable(drive); -} - static int hpt3xx_quirkproc(ide_drive_t *drive) { struct hd_driveid *id = drive->id; @@ -739,7 +723,7 @@ static int hpt366_config_drive_xfer_rate(ide_drive_t *drive) { drive->init_speed = 0; - if (ide_use_dma(drive) && config_chipset_for_dma(drive)) + if (ide_tune_dma(drive)) return 0; if (ide_use_fast_pio(drive)) @@ -1271,6 +1255,7 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif) hwif->intrproc = &hpt3xx_intrproc; hwif->maskproc = &hpt3xx_maskproc; hwif->busproc = &hpt3xx_busproc; + hwif->udma_filter = &hpt3xx_udma_filter; /* * HPT3xxN chips have some complications: |