summaryrefslogtreecommitdiff
path: root/drivers/ide/pci/it8213.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/it8213.c')
-rw-r--r--drivers/ide/pci/it8213.c84
1 files changed, 12 insertions, 72 deletions
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
index ecf4ce078dce..24a71d03744a 100644
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -18,37 +18,6 @@
#include <asm/io.h>
/**
- * it8213_dma_2_pio - return the PIO mode matching DMA
- * @xfer_rate: transfer speed
- *
- * Returns the nearest equivalent PIO timing for the DMA
- * mode requested by the controller.
- */
-
-static u8 it8213_dma_2_pio (u8 xfer_rate) {
- switch(xfer_rate) {
- case XFER_UDMA_6:
- case XFER_UDMA_5:
- case XFER_UDMA_4:
- case XFER_UDMA_3:
- case XFER_UDMA_2:
- case XFER_UDMA_1:
- case XFER_UDMA_0:
- case XFER_MW_DMA_2:
- return 4;
- case XFER_MW_DMA_1:
- return 3;
- case XFER_SW_DMA_2:
- return 2;
- case XFER_MW_DMA_0:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
- default:
- return 0;
- }
-}
-
-/**
* it8213_set_pio_mode - set host controller for PIO mode
* @drive: drive
* @pio: PIO mode number
@@ -166,6 +135,9 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
} else
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
} else {
+ const u8 mwdma_to_pio[] = { 0, 3, 4 };
+ u8 pio;
+
if (reg48 & u_flag)
pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
if (reg4a & a_speed)
@@ -174,38 +146,21 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
if (reg55 & w_flag)
pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
- }
-
- it8213_set_pio_mode(drive, it8213_dma_2_pio(speed));
-}
-
-/**
- * it8213_configure_drive_for_dma - set up for DMA transfers
- * @drive: drive we are going to set up
- *
- * Set up the drive for DMA, tune the controller and drive as
- * required. If the drive isn't suitable for DMA or we hit
- * other problems then we will drop down to PIO and set up
- * PIO appropriately
- */
-static int it8213_config_drive_for_dma (ide_drive_t *drive)
-{
- if (ide_tune_dma(drive))
- return 0;
+ if (speed >= XFER_MW_DMA_0)
+ pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
+ else
+ pio = 2; /* only SWDMA2 is allowed */
- ide_set_max_pio(drive);
-
- return -1;
+ it8213_set_pio_mode(drive, pio);
+ }
}
/**
* init_hwif_it8213 - set up hwif structs
* @hwif: interface to set up
*
- * We do the basic set up of the interface structure. The IT8212
- * requires several custom handlers so we override the default
- * ide DMA handlers appropriately
+ * We do the basic set up of the interface structure.
*/
static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
@@ -215,8 +170,6 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
hwif->set_dma_mode = &it8213_set_dma_mode;
hwif->set_pio_mode = &it8213_set_pio_mode;
- hwif->autodma = 0;
-
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
@@ -230,20 +183,8 @@ static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
pci_read_config_byte(hwif->pci_dev, 0x42, &reg42h);
- hwif->ide_dma_check = &it8213_config_drive_for_dma;
-
if (hwif->cbl != ATA_CBL_PATA40_SHORT)
hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-
- /*
- * The BIOS often doesn't set up DMA on this controller
- * so we always do it.
- */
- if (!noautodma)
- hwif->autodma = 1;
-
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
}
@@ -279,9 +220,8 @@ static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_devic
return 0;
}
-
-static struct pci_device_id it8213_pci_tbl[] = {
- { PCI_VENDOR_ID_ITE, 0x8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+static const struct pci_device_id it8213_pci_tbl[] = {
+ { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8213), 0 },
{ 0, },
};