summaryrefslogtreecommitdiff
path: root/drivers/ide/pci/opti621.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/opti621.c')
-rw-r--r--drivers/ide/pci/opti621.c63
1 files changed, 32 insertions, 31 deletions
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 22bbf613f948..9ca60dd2185e 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -176,34 +176,35 @@ static int cmpt_clk(int time, int bus_speed)
return ((time*bus_speed+999)/1000);
}
-static void write_reg(ide_hwif_t *hwif, u8 value, int reg)
/* Write value to register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
* This is from setupvic.exe program.
*/
+static void write_reg(u8 value, int reg)
{
- hwif->INW(reg_base+1);
- hwif->INW(reg_base+1);
- hwif->OUTB(3, reg_base+2);
- hwif->OUTB(value, reg_base+reg);
- hwif->OUTB(0x83, reg_base+2);
+ inw(reg_base + 1);
+ inw(reg_base + 1);
+ outb(3, reg_base + 2);
+ outb(value, reg_base + reg);
+ outb(0x83, reg_base + 2);
}
-static u8 read_reg(ide_hwif_t *hwif, int reg)
/* Read value from register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
* This is from setupvic.exe program.
*/
+static u8 read_reg(int reg)
{
u8 ret = 0;
- hwif->INW(reg_base+1);
- hwif->INW(reg_base+1);
- hwif->OUTB(3, reg_base+2);
- ret = hwif->INB(reg_base+reg);
- hwif->OUTB(0x83, reg_base+2);
+ inw(reg_base + 1);
+ inw(reg_base + 1);
+ outb(3, reg_base + 2);
+ ret = inb(reg_base + reg);
+ outb(0x83, reg_base + 2);
+
return ret;
}
@@ -286,39 +287,39 @@ static void opti621_tune_drive (ide_drive_t *drive, u8 pio)
reg_base = hwif->io_ports[IDE_DATA_OFFSET];
/* allow Register-B */
- hwif->OUTB(0xc0, reg_base+CNTRL_REG);
+ outb(0xc0, reg_base + CNTRL_REG);
/* hmm, setupvic.exe does this ;-) */
- hwif->OUTB(0xff, reg_base+5);
+ outb(0xff, reg_base + 5);
/* if reads 0xff, adapter not exist? */
- (void) hwif->INB(reg_base+CNTRL_REG);
+ (void)inb(reg_base + CNTRL_REG);
/* if reads 0xc0, no interface exist? */
- read_reg(hwif, CNTRL_REG);
+ read_reg(CNTRL_REG);
/* read version, probably 0 */
- read_reg(hwif, STRAP_REG);
+ read_reg(STRAP_REG);
/* program primary drive */
- /* select Index-0 for Register-A */
- write_reg(hwif, 0, MISC_REG);
- /* set read cycle timings */
- write_reg(hwif, cycle1, READ_REG);
- /* set write cycle timings */
- write_reg(hwif, cycle1, WRITE_REG);
+ /* select Index-0 for Register-A */
+ write_reg(0, MISC_REG);
+ /* set read cycle timings */
+ write_reg(cycle1, READ_REG);
+ /* set write cycle timings */
+ write_reg(cycle1, WRITE_REG);
/* program secondary drive */
- /* select Index-1 for Register-B */
- write_reg(hwif, 1, MISC_REG);
- /* set read cycle timings */
- write_reg(hwif, cycle2, READ_REG);
- /* set write cycle timings */
- write_reg(hwif, cycle2, WRITE_REG);
+ /* select Index-1 for Register-B */
+ write_reg(1, MISC_REG);
+ /* set read cycle timings */
+ write_reg(cycle2, READ_REG);
+ /* set write cycle timings */
+ write_reg(cycle2, WRITE_REG);
/* use Register-A for drive 0 */
/* use Register-B for drive 1 */
- write_reg(hwif, 0x85, CNTRL_REG);
+ write_reg(0x85, CNTRL_REG);
/* set address setup, DRDY timings, */
/* and read prefetch for both drives */
- write_reg(hwif, misc, MISC_REG);
+ write_reg(misc, MISC_REG);
spin_unlock_irqrestore(&ide_lock, flags);
}