diff options
Diffstat (limited to 'drivers/ide/pci/via82cxxx.c')
| -rw-r--r-- | drivers/ide/pci/via82cxxx.c | 514 |
1 files changed, 0 insertions, 514 deletions
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c deleted file mode 100644 index 2a812d3207e9..000000000000 --- a/drivers/ide/pci/via82cxxx.c +++ /dev/null @@ -1,514 +0,0 @@ -/* - * VIA IDE driver for Linux. Supported southbridges: - * - * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b, - * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a, - * vt8235, vt8237, vt8237a - * - * Copyright (c) 2000-2002 Vojtech Pavlik - * Copyright (c) 2007 Bartlomiej Zolnierkiewicz - * - * Based on the work of: - * Michel Aubry - * Jeff Garzik - * Andre Hedrick - * - * Documentation: - * Obsolete device documentation publically available from via.com.tw - * Current device documentation available under NDA only - */ - -/* - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/ide.h> -#include <linux/dmi.h> - -#ifdef CONFIG_PPC_CHRP -#include <asm/processor.h> -#endif - -#define DRV_NAME "via82cxxx" - -#define VIA_IDE_ENABLE 0x40 -#define VIA_IDE_CONFIG 0x41 -#define VIA_FIFO_CONFIG 0x43 -#define VIA_MISC_1 0x44 -#define VIA_MISC_2 0x45 -#define VIA_MISC_3 0x46 -#define VIA_DRIVE_TIMING 0x48 -#define VIA_8BIT_TIMING 0x4e -#define VIA_ADDRESS_SETUP 0x4c -#define VIA_UDMA_TIMING 0x50 - -#define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */ -#define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */ -#define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */ -#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */ -#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */ -#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */ - -/* - * VIA SouthBridge chips. - */ - -static struct via_isa_bridge { - char *name; - u16 id; - u8 rev_min; - u8 rev_max; - u8 udma_mask; - u8 flags; -} via_isa_bridges[] = { - { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, - { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, }, - { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, }, - { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, }, - { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, }, - { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, }, - { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, - { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, }, - { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ }, - { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO }, - { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO }, - { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK }, - { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, - { NULL } -}; - -static unsigned int via_clock; -static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" }; - -struct via82cxxx_dev -{ - struct via_isa_bridge *via_config; - unsigned int via_80w; -}; - -/** - * via_set_speed - write timing registers - * @dev: PCI device - * @dn: device - * @timing: IDE timing data to use - * - * via_set_speed writes timing values to the chipset registers - */ - -static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing) -{ - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct via82cxxx_dev *vdev = host->host_priv; - u8 t; - - if (~vdev->via_config->flags & VIA_BAD_AST) { - pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t); - t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1)); - pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t); - } - - pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)), - ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1)); - - pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn), - ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1)); - - switch (vdev->via_config->udma_mask) { - case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break; - case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break; - case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; - case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break; - default: return; - } - - pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t); -} - -/** - * via_set_drive - configure transfer mode - * @drive: Drive to set up - * @speed: desired speed - * - * via_set_drive() computes timing values configures the chipset to - * a desired transfer mode. It also can be called by upper layers. - */ - -static void via_set_drive(ide_drive_t *drive, const u8 speed) -{ - ide_hwif_t *hwif = drive->hwif; - ide_drive_t *peer = ide_get_pair_dev(drive); - struct pci_dev *dev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(dev); - struct via82cxxx_dev *vdev = host->host_priv; - struct ide_timing t, p; - unsigned int T, UT; - - T = 1000000000 / via_clock; - - switch (vdev->via_config->udma_mask) { - case ATA_UDMA2: UT = T; break; - case ATA_UDMA4: UT = T/2; break; - case ATA_UDMA5: UT = T/3; break; - case ATA_UDMA6: UT = T/4; break; - default: UT = T; - } - - ide_timing_compute(drive, speed, &t, T, UT); - - if (peer) { - ide_timing_compute(peer, peer->current_speed, &p, T, UT); - ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT); - } - - via_set_speed(HWIF(drive), drive->dn, &t); -} - -/** - * via_set_pio_mode - set host controller for PIO mode - * @drive: drive - * @pio: PIO mode number - * - * A callback from the upper layers for PIO-only tuning. - */ - -static void via_set_pio_mode(ide_drive_t *drive, const u8 pio) -{ - via_set_drive(drive, XFER_PIO_0 + pio); -} - -static struct via_isa_bridge *via_config_find(struct pci_dev **isa) -{ - struct via_isa_bridge *via_config; - - for (via_config = via_isa_bridges; via_config->id; via_config++) - if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA + - !!(via_config->flags & VIA_BAD_ID), - via_config->id, NULL))) { - - if ((*isa)->revision >= via_config->rev_min && - (*isa)->revision <= via_config->rev_max) - break; - pci_dev_put(*isa); - } - - return via_config; -} - -/* - * Check and handle 80-wire cable presence - */ -static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u) -{ - int i; - - switch (vdev->via_config->udma_mask) { - case ATA_UDMA4: - for (i = 24; i >= 0; i -= 8) - if (((u >> (i & 16)) & 8) && - ((u >> i) & 0x20) && - (((u >> i) & 7) < 2)) { - /* - * 2x PCI clock and - * UDMA w/ < 3T/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case ATA_UDMA5: - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 4))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - - case ATA_UDMA6: - for (i = 24; i >= 0; i -= 8) - if (((u >> i) & 0x10) || - (((u >> i) & 0x20) && - (((u >> i) & 7) < 6))) { - /* BIOS 80-wire bit or - * UDMA w/ < 60ns/cycle - */ - vdev->via_80w |= (1 << (1 - (i >> 4))); - } - break; - } -} - -/** - * init_chipset_via82cxxx - initialization handler - * @dev: PCI device - * - * The initialization callback. Here we determine the IDE chip type - * and initialize its drive independent registers. - */ - -static unsigned int init_chipset_via82cxxx(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct via82cxxx_dev *vdev = host->host_priv; - struct via_isa_bridge *via_config = vdev->via_config; - u8 t, v; - u32 u; - - /* - * Detect cable and configure Clk66 - */ - pci_read_config_dword(dev, VIA_UDMA_TIMING, &u); - - via_cable_detect(vdev, u); - - if (via_config->udma_mask == ATA_UDMA4) { - /* Enable Clk66 */ - pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008); - } else if (via_config->flags & VIA_BAD_CLK66) { - /* Would cause trouble on 596a and 686 */ - pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008); - } - - /* - * Check whether interfaces are enabled. - */ - - pci_read_config_byte(dev, VIA_IDE_ENABLE, &v); - - /* - * Set up FIFO sizes and thresholds. - */ - - pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t); - - /* Disable PREQ# till DDACK# */ - if (via_config->flags & VIA_BAD_PREQ) { - /* Would crash on 586b rev 41 */ - t &= 0x7f; - } - - /* Fix FIFO split between channels */ - if (via_config->flags & VIA_SET_FIFO) { - t &= (t & 0x9f); - switch (v & 3) { - case 2: t |= 0x00; break; /* 16 on primary */ - case 1: t |= 0x60; break; /* 16 on secondary */ - case 3: t |= 0x20; break; /* 8 pri 8 sec */ - } - } - - pci_write_config_byte(dev, VIA_FIFO_CONFIG, t); - - return 0; -} - -/* - * Cable special cases - */ - -static const struct dmi_system_id cable_dmi_table[] = { - { - .ident = "Acer Ferrari 3400", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."), - DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"), - }, - }, - { } -}; - -static int via_cable_override(struct pci_dev *pdev) -{ - /* Systems by DMI */ - if (dmi_check_system(cable_dmi_table)) - return 1; - - /* Arima W730-K8/Targa Visionary 811/... */ - if (pdev->subsystem_vendor == 0x161F && - pdev->subsystem_device == 0x2032) - return 1; - - return 0; -} - -static u8 via82cxxx_cable_detect(ide_hwif_t *hwif) -{ - struct pci_dev *pdev = to_pci_dev(hwif->dev); - struct ide_host *host = pci_get_drvdata(pdev); - struct via82cxxx_dev *vdev = host->host_priv; - - if (via_cable_override(pdev)) - return ATA_CBL_PATA40_SHORT; - - if ((vdev->via_80w >> hwif->channel) & 1) - return ATA_CBL_PATA80; - else - return ATA_CBL_PATA40; -} - -static const struct ide_port_ops via_port_ops = { - .set_pio_mode = via_set_pio_mode, - .set_dma_mode = via_set_drive, - .cable_detect = via82cxxx_cable_detect, -}; - -static const struct ide_port_info via82cxxx_chipset __devinitdata = { - .name = DRV_NAME, - .init_chipset = init_chipset_via82cxxx, - .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } }, - .port_ops = &via_port_ops, - .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST | - IDE_HFLAG_POST_SET_MODE | - IDE_HFLAG_IO_32BIT, - .pio_mask = ATA_PIO5, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, -}; - -static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id) -{ - struct pci_dev *isa = NULL; - struct via_isa_bridge *via_config; - struct via82cxxx_dev *vdev; - int rc; - u8 idx = id->driver_data; - struct ide_port_info d; - - d = via82cxxx_chipset; - - /* - * Find the ISA bridge and check we know what it is. - */ - via_config = via_config_find(&isa); - if (!via_config->id) { - printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n", - pci_name(dev)); - return -ENODEV; - } - - /* - * Print the boot message. - */ - printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n", - pci_name(dev), via_config->name, isa->revision, - via_config->udma_mask ? "U" : "MW", - via_dma[via_config->udma_mask ? - (fls(via_config->udma_mask) - 1) : 0]); - - pci_dev_put(isa); - - /* - * Determine system bus clock. - */ - via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000; - - switch (via_clock) { - case 33000: via_clock = 33333; break; - case 37000: via_clock = 37500; break; - case 41000: via_clock = 41666; break; - } - - if (via_clock < 20000 || via_clock > 50000) { - printk(KERN_WARNING DRV_NAME ": User given PCI clock speed " - "impossible (%d), using 33 MHz instead.\n", via_clock); - printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want " - "to assume 80-wire cable.\n"); - via_clock = 33333; - } - - if (idx == 0) - d.host_flags |= IDE_HFLAG_NO_AUTODMA; - else - d.enablebits[1].reg = d.enablebits[0].reg = 0; - - if ((via_config->flags & VIA_NO_UNMASK) == 0) - d.host_flags |= IDE_HFLAG_UNMASK_IRQS; - -#ifdef CONFIG_PPC_CHRP - if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos) - d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS; -#endif - - d.udma_mask = via_config->udma_mask; - - vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); - if (!vdev) { - printk(KERN_ERR DRV_NAME " %s: out of memory :(\n", - pci_name(dev)); - return -ENOMEM; - } - - vdev->via_config = via_config; - - rc = ide_pci_init_one(dev, &d, vdev); - if (rc) - kfree(vdev); - - return rc; -} - -static void __devexit via_remove(struct pci_dev *dev) -{ - struct ide_host *host = pci_get_drvdata(dev); - struct via82cxxx_dev *vdev = host->host_priv; - - ide_pci_remove(dev); - kfree(vdev); -} - -static const struct pci_device_id via_pci_tbl[] = { - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, - { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, - { 0, }, -}; -MODULE_DEVICE_TABLE(pci, via_pci_tbl); - -static struct pci_driver via_pci_driver = { - .name = "VIA_IDE", - .id_table = via_pci_tbl, - .probe = via_init_one, - .remove = __devexit_p(via_remove), - .suspend = ide_pci_suspend, - .resume = ide_pci_resume, -}; - -static int __init via_ide_init(void) -{ - return ide_pci_register_driver(&via_pci_driver); -} - -static void __exit via_ide_exit(void) -{ - pci_unregister_driver(&via_pci_driver); -} - -module_init(via_ide_init); -module_exit(via_ide_exit); - -MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick"); -MODULE_DESCRIPTION("PCI driver module for VIA IDE"); -MODULE_LICENSE("GPL"); |