summaryrefslogtreecommitdiff
path: root/drivers/ieee1394/sbp2.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ieee1394/sbp2.c')
-rw-r--r--drivers/ieee1394/sbp2.c2192
1 files changed, 818 insertions, 1374 deletions
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 6986ac188281..e68b80b7340d 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -29,13 +29,26 @@
* driver. It also registers as a SCSI lower-level driver in order to accept
* SCSI commands for transport using SBP-2.
*
- * You may access any attached SBP-2 storage devices as if they were SCSI
- * devices (e.g. mount /dev/sda1, fdisk, mkfs, etc.).
+ * You may access any attached SBP-2 (usually storage devices) as regular
+ * SCSI devices. E.g. mount /dev/sda1, fdisk, mkfs, etc..
*
- * Current Issues:
+ * See http://www.t10.org/drafts.htm#sbp2 for the final draft of the SBP-2
+ * specification and for where to purchase the official standard.
*
- * - Error Handling: SCSI aborts and bus reset requests are handled somewhat
- * but the code needs additional debugging.
+ * TODO:
+ * - look into possible improvements of the SCSI error handlers
+ * - handle Unit_Characteristics.mgt_ORB_timeout and .ORB_size
+ * - handle Logical_Unit_Number.ordered
+ * - handle src == 1 in status blocks
+ * - reimplement the DMA mapping in absence of physical DMA so that
+ * bus_to_virt is no longer required
+ * - debug the handling of absent physical DMA
+ * - replace CONFIG_IEEE1394_SBP2_PHYS_DMA by automatic detection
+ * (this is easy but depends on the previous two TODO items)
+ * - make the parameter serialize_io configurable per device
+ * - move all requests to fetch agent registers into non-atomic context,
+ * replace all usages of sbp2util_node_write_no_wait by true transactions
+ * Grep for inline FIXME comments below.
*/
#include <linux/blkdev.h>
@@ -49,7 +62,6 @@
#include <linux/list.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/stat.h>
@@ -98,20 +110,20 @@
* (probably due to PCI latency/throughput issues with the part). You can
* bump down the speed if you are running into problems.
*/
-static int max_speed = IEEE1394_SPEED_MAX;
-module_param(max_speed, int, 0644);
-MODULE_PARM_DESC(max_speed, "Force max speed (3 = 800mb, 2 = 400mb, 1 = 200mb, 0 = 100mb)");
+static int sbp2_max_speed = IEEE1394_SPEED_MAX;
+module_param_named(max_speed, sbp2_max_speed, int, 0644);
+MODULE_PARM_DESC(max_speed, "Force max speed "
+ "(3 = 800Mb/s, 2 = 400Mb/s, 1 = 200Mb/s, 0 = 100Mb/s)");
/*
* Set serialize_io to 1 if you'd like only one scsi command sent
* down to us at a time (debugging). This might be necessary for very
* badly behaved sbp2 devices.
- *
- * TODO: Make this configurable per device.
*/
-static int serialize_io = 1;
-module_param(serialize_io, int, 0444);
-MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default = 1, faster = 0)");
+static int sbp2_serialize_io = 1;
+module_param_named(serialize_io, sbp2_serialize_io, int, 0444);
+MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers "
+ "(default = 1, faster = 0)");
/*
* Bump up max_sectors if you'd like to support very large sized
@@ -121,10 +133,10 @@ MODULE_PARM_DESC(serialize_io, "Serialize I/O coming from scsi drivers (default
* the Oxsemi sbp2 chipsets have no problems supporting very large
* transfer sizes.
*/
-static int max_sectors = SBP2_MAX_SECTORS;
-module_param(max_sectors, int, 0444);
-MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
- __stringify(SBP2_MAX_SECTORS) ")");
+static int sbp2_max_sectors = SBP2_MAX_SECTORS;
+module_param_named(max_sectors, sbp2_max_sectors, int, 0444);
+MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported "
+ "(default = " __stringify(SBP2_MAX_SECTORS) ")");
/*
* Exclusive login to sbp2 device? In most cases, the sbp2 driver should
@@ -139,9 +151,10 @@ MODULE_PARM_DESC(max_sectors, "Change max sectors per I/O supported (default = "
* concurrent logins. Depending on firmware, four or two concurrent logins
* are possible on OXFW911 and newer Oxsemi bridges.
*/
-static int exclusive_login = 1;
-module_param(exclusive_login, int, 0644);
-MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device (default = 1)");
+static int sbp2_exclusive_login = 1;
+module_param_named(exclusive_login, sbp2_exclusive_login, int, 0644);
+MODULE_PARM_DESC(exclusive_login, "Exclusive login to sbp2 device "
+ "(default = 1)");
/*
* If any of the following workarounds is required for your device to work,
@@ -179,123 +192,123 @@ MODULE_PARM_DESC(workarounds, "Work around device bugs (default = 0"
", override internal blacklist = " __stringify(SBP2_WORKAROUND_OVERRIDE)
", or a combination)");
-/*
- * Export information about protocols/devices supported by this driver.
- */
-static struct ieee1394_device_id sbp2_id_table[] = {
- {
- .match_flags = IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION,
- .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff,
- .version = SBP2_SW_VERSION_ENTRY & 0xffffff},
- {}
-};
-
-MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table);
-
-/*
- * Debug levels, configured via kernel config, or enable here.
- */
-
-#define CONFIG_IEEE1394_SBP2_DEBUG 0
-/* #define CONFIG_IEEE1394_SBP2_DEBUG_ORBS */
-/* #define CONFIG_IEEE1394_SBP2_DEBUG_DMA */
-/* #define CONFIG_IEEE1394_SBP2_DEBUG 1 */
-/* #define CONFIG_IEEE1394_SBP2_DEBUG 2 */
-/* #define CONFIG_IEEE1394_SBP2_PACKET_DUMP */
-
-#ifdef CONFIG_IEEE1394_SBP2_DEBUG_ORBS
-#define SBP2_ORB_DEBUG(fmt, args...) HPSB_ERR("sbp2(%s): "fmt, __FUNCTION__, ## args)
-static u32 global_outstanding_command_orbs = 0;
-#define outstanding_orb_incr global_outstanding_command_orbs++
-#define outstanding_orb_decr global_outstanding_command_orbs--
-#else
-#define SBP2_ORB_DEBUG(fmt, args...) do {} while (0)
-#define outstanding_orb_incr do {} while (0)
-#define outstanding_orb_decr do {} while (0)
-#endif
-
-#ifdef CONFIG_IEEE1394_SBP2_DEBUG_DMA
-#define SBP2_DMA_ALLOC(fmt, args...) \
- HPSB_ERR("sbp2(%s)alloc(%d): "fmt, __FUNCTION__, \
- ++global_outstanding_dmas, ## args)
-#define SBP2_DMA_FREE(fmt, args...) \
- HPSB_ERR("sbp2(%s)free(%d): "fmt, __FUNCTION__, \
- --global_outstanding_dmas, ## args)
-static u32 global_outstanding_dmas = 0;
-#else
-#define SBP2_DMA_ALLOC(fmt, args...) do {} while (0)
-#define SBP2_DMA_FREE(fmt, args...) do {} while (0)
-#endif
-#if CONFIG_IEEE1394_SBP2_DEBUG >= 2
-#define SBP2_DEBUG(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
-#define SBP2_INFO(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
-#define SBP2_NOTICE(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
-#define SBP2_WARN(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
-#elif CONFIG_IEEE1394_SBP2_DEBUG == 1
-#define SBP2_DEBUG(fmt, args...) HPSB_DEBUG("sbp2: "fmt, ## args)
-#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args)
-#define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args)
-#define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args)
-#else
-#define SBP2_DEBUG(fmt, args...) do {} while (0)
-#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args)
-#define SBP2_NOTICE(fmt, args...) HPSB_NOTICE("sbp2: "fmt, ## args)
-#define SBP2_WARN(fmt, args...) HPSB_WARN("sbp2: "fmt, ## args)
-#endif
-
-#define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
-#define SBP2_DEBUG_ENTER() SBP2_DEBUG("%s", __FUNCTION__)
+#define SBP2_INFO(fmt, args...) HPSB_INFO("sbp2: "fmt, ## args)
+#define SBP2_ERR(fmt, args...) HPSB_ERR("sbp2: "fmt, ## args)
/*
* Globals
*/
+static void sbp2scsi_complete_all_commands(struct sbp2_lu *, u32);
+static void sbp2scsi_complete_command(struct sbp2_lu *, u32, struct scsi_cmnd *,
+ void (*)(struct scsi_cmnd *));
+static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *);
+static int sbp2_start_device(struct sbp2_lu *);
+static void sbp2_remove_device(struct sbp2_lu *);
+static int sbp2_login_device(struct sbp2_lu *);
+static int sbp2_reconnect_device(struct sbp2_lu *);
+static int sbp2_logout_device(struct sbp2_lu *);
+static void sbp2_host_reset(struct hpsb_host *);
+static int sbp2_handle_status_write(struct hpsb_host *, int, int, quadlet_t *,
+ u64, size_t, u16);
+static int sbp2_agent_reset(struct sbp2_lu *, int);
+static void sbp2_parse_unit_directory(struct sbp2_lu *,
+ struct unit_directory *);
+static int sbp2_set_busy_timeout(struct sbp2_lu *);
+static int sbp2_max_speed_and_size(struct sbp2_lu *);
-static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id,
- u32 status);
-
-static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
- u32 scsi_status, struct scsi_cmnd *SCpnt,
- void (*done)(struct scsi_cmnd *));
-
-static struct scsi_host_template scsi_driver_template;
static const u8 sbp2_speedto_max_payload[] = { 0x7, 0x8, 0x9, 0xA, 0xB, 0xC };
-static void sbp2_host_reset(struct hpsb_host *host);
-
-static int sbp2_probe(struct device *dev);
-static int sbp2_remove(struct device *dev);
-static int sbp2_update(struct unit_directory *ud);
-
static struct hpsb_highlevel sbp2_highlevel = {
- .name = SBP2_DEVICE_NAME,
- .host_reset = sbp2_host_reset,
+ .name = SBP2_DEVICE_NAME,
+ .host_reset = sbp2_host_reset,
};
static struct hpsb_address_ops sbp2_ops = {
- .write = sbp2_handle_status_write
+ .write = sbp2_handle_status_write
};
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
+static int sbp2_handle_physdma_write(struct hpsb_host *, int, int, quadlet_t *,
+ u64, size_t, u16);
+static int sbp2_handle_physdma_read(struct hpsb_host *, int, quadlet_t *, u64,
+ size_t, u16);
+
static struct hpsb_address_ops sbp2_physdma_ops = {
- .read = sbp2_handle_physdma_read,
- .write = sbp2_handle_physdma_write,
+ .read = sbp2_handle_physdma_read,
+ .write = sbp2_handle_physdma_write,
};
#endif
+
+/*
+ * Interface to driver core and IEEE 1394 core
+ */
+static struct ieee1394_device_id sbp2_id_table[] = {
+ {
+ .match_flags = IEEE1394_MATCH_SPECIFIER_ID | IEEE1394_MATCH_VERSION,
+ .specifier_id = SBP2_UNIT_SPEC_ID_ENTRY & 0xffffff,
+ .version = SBP2_SW_VERSION_ENTRY & 0xffffff},
+ {}
+};
+MODULE_DEVICE_TABLE(ieee1394, sbp2_id_table);
+
+static int sbp2_probe(struct device *);
+static int sbp2_remove(struct device *);
+static int sbp2_update(struct unit_directory *);
+
static struct hpsb_protocol_driver sbp2_driver = {
- .name = "SBP2 Driver",
+ .name = SBP2_DEVICE_NAME,
.id_table = sbp2_id_table,
.update = sbp2_update,
.driver = {
- .name = SBP2_DEVICE_NAME,
- .bus = &ieee1394_bus_type,
.probe = sbp2_probe,
.remove = sbp2_remove,
},
};
+
+/*
+ * Interface to SCSI core
+ */
+static int sbp2scsi_queuecommand(struct scsi_cmnd *,
+ void (*)(struct scsi_cmnd *));
+static int sbp2scsi_abort(struct scsi_cmnd *);
+static int sbp2scsi_reset(struct scsi_cmnd *);
+static int sbp2scsi_slave_alloc(struct scsi_device *);
+static int sbp2scsi_slave_configure(struct scsi_device *);
+static void sbp2scsi_slave_destroy(struct scsi_device *);
+static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *,
+ struct device_attribute *, char *);
+
+static DEVICE_ATTR(ieee1394_id, S_IRUGO, sbp2_sysfs_ieee1394_id_show, NULL);
+
+static struct device_attribute *sbp2_sysfs_sdev_attrs[] = {
+ &dev_attr_ieee1394_id,
+ NULL
+};
+
+static struct scsi_host_template sbp2_shost_template = {
+ .module = THIS_MODULE,
+ .name = "SBP-2 IEEE-1394",
+ .proc_name = SBP2_DEVICE_NAME,
+ .queuecommand = sbp2scsi_queuecommand,
+ .eh_abort_handler = sbp2scsi_abort,
+ .eh_device_reset_handler = sbp2scsi_reset,
+ .slave_alloc = sbp2scsi_slave_alloc,
+ .slave_configure = sbp2scsi_slave_configure,
+ .slave_destroy = sbp2scsi_slave_destroy,
+ .this_id = -1,
+ .sg_tablesize = SG_ALL,
+ .use_clustering = ENABLE_CLUSTERING,
+ .cmd_per_lun = SBP2_MAX_CMDS,
+ .can_queue = SBP2_MAX_CMDS,
+ .emulated = 1,
+ .sdev_attrs = sbp2_sysfs_sdev_attrs,
+};
+
+
/*
* List of devices with known bugs.
*
@@ -363,8 +376,6 @@ static inline void sbp2util_be32_to_cpu_buffer(void *buffer, int length)
for (length = (length >> 2); length--; )
temp[length] = be32_to_cpu(temp[length]);
-
- return;
}
/*
@@ -376,8 +387,6 @@ static inline void sbp2util_cpu_to_be32_buffer(void *buffer, int length)
for (length = (length >> 2); length--; )
temp[length] = cpu_to_be32(temp[length]);
-
- return;
}
#else /* BIG_ENDIAN */
/* Why waste the cpu cycles? */
@@ -385,339 +394,246 @@ static inline void sbp2util_cpu_to_be32_buffer(void *buffer, int length)
#define sbp2util_cpu_to_be32_buffer(x,y) do {} while (0)
#endif
-#ifdef CONFIG_IEEE1394_SBP2_PACKET_DUMP
-/*
- * Debug packet dump routine. Length is in bytes.
- */
-static void sbp2util_packet_dump(void *buffer, int length, char *dump_name,
- u32 dump_phys_addr)
-{
- int i;
- unsigned char *dump = buffer;
-
- if (!dump || !length || !dump_name)
- return;
-
- if (dump_phys_addr)
- printk("[%s, 0x%x]", dump_name, dump_phys_addr);
- else
- printk("[%s]", dump_name);
- for (i = 0; i < length; i++) {
- if (i > 0x3f) {
- printk("\n ...");
- break;
- }
- if ((i & 0x3) == 0)
- printk(" ");
- if ((i & 0xf) == 0)
- printk("\n ");
- printk("%02x ", (int)dump[i]);
- }
- printk("\n");
-
- return;
-}
-#else
-#define sbp2util_packet_dump(w,x,y,z) do {} while (0)
-#endif
-
-static DECLARE_WAIT_QUEUE_HEAD(access_wq);
+static DECLARE_WAIT_QUEUE_HEAD(sbp2_access_wq);
/*
* Waits for completion of an SBP-2 access request.
* Returns nonzero if timed out or prematurely interrupted.
*/
-static int sbp2util_access_timeout(struct scsi_id_instance_data *scsi_id,
- int timeout)
+static int sbp2util_access_timeout(struct sbp2_lu *lu, int timeout)
{
- long leftover = wait_event_interruptible_timeout(
- access_wq, scsi_id->access_complete, timeout);
+ long leftover;
- scsi_id->access_complete = 0;
+ leftover = wait_event_interruptible_timeout(
+ sbp2_access_wq, lu->access_complete, timeout);
+ lu->access_complete = 0;
return leftover <= 0;
}
-/* Frees an allocated packet */
-static void sbp2_free_packet(struct hpsb_packet *packet)
+static void sbp2_free_packet(void *packet)
{
hpsb_free_tlabel(packet);
hpsb_free_packet(packet);
}
-/* This is much like hpsb_node_write(), except it ignores the response
- * subaction and returns immediately. Can be used from interrupts.
+/*
+ * This is much like hpsb_node_write(), except it ignores the response
+ * subaction and returns immediately. Can be used from atomic context.
*/
static int sbp2util_node_write_no_wait(struct node_entry *ne, u64 addr,
- quadlet_t *buffer, size_t length)
+ quadlet_t *buf, size_t len)
{
struct hpsb_packet *packet;
- packet = hpsb_make_writepacket(ne->host, ne->nodeid,
- addr, buffer, length);
+ packet = hpsb_make_writepacket(ne->host, ne->nodeid, addr, buf, len);
if (!packet)
return -ENOMEM;
- hpsb_set_packet_complete_task(packet,
- (void (*)(void *))sbp2_free_packet,
- packet);
-
+ hpsb_set_packet_complete_task(packet, sbp2_free_packet, packet);
hpsb_node_fill_packet(ne, packet);
-
if (hpsb_send_packet(packet) < 0) {
sbp2_free_packet(packet);
return -EIO;
}
-
return 0;
}
-static void sbp2util_notify_fetch_agent(struct scsi_id_instance_data *scsi_id,
- u64 offset, quadlet_t *data, size_t len)
+static void sbp2util_notify_fetch_agent(struct sbp2_lu *lu, u64 offset,
+ quadlet_t *data, size_t len)
{
- /*
- * There is a small window after a bus reset within which the node
- * entry's generation is current but the reconnect wasn't completed.
- */
- if (unlikely(atomic_read(&scsi_id->state) == SBP2LU_STATE_IN_RESET))
+ /* There is a small window after a bus reset within which the node
+ * entry's generation is current but the reconnect wasn't completed. */
+ if (unlikely(atomic_read(&lu->state) == SBP2LU_STATE_IN_RESET))
return;
- if (hpsb_node_write(scsi_id->ne,
- scsi_id->sbp2_command_block_agent_addr + offset,
+ if (hpsb_node_write(lu->ne, lu->command_block_agent_addr + offset,
data, len))
SBP2_ERR("sbp2util_notify_fetch_agent failed.");
- /*
- * Now accept new SCSI commands, unless a bus reset happended during
- * hpsb_node_write.
- */
- if (likely(atomic_read(&scsi_id->state) != SBP2LU_STATE_IN_RESET))
- scsi_unblock_requests(scsi_id->scsi_host);
+
+ /* Now accept new SCSI commands, unless a bus reset happended during
+ * hpsb_node_write. */
+ if (likely(atomic_read(&lu->state) != SBP2LU_STATE_IN_RESET))
+ scsi_unblock_requests(lu->shost);
}
-static void sbp2util_write_orb_pointer(void *p)
+static void sbp2util_write_orb_pointer(struct work_struct *work)
{
+ struct sbp2_lu *lu = container_of(work, struct sbp2_lu, protocol_work);
quadlet_t data[2];
- data[0] = ORB_SET_NODE_ID(
- ((struct scsi_id_instance_data *)p)->hi->host->node_id);
- data[1] = ((struct scsi_id_instance_data *)p)->last_orb_dma;
+ data[0] = ORB_SET_NODE_ID(lu->hi->host->node_id);
+ data[1] = lu->last_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- sbp2util_notify_fetch_agent(p, SBP2_ORB_POINTER_OFFSET, data, 8);
+ sbp2util_notify_fetch_agent(lu, SBP2_ORB_POINTER_OFFSET, data, 8);
}
-static void sbp2util_write_doorbell(void *p)
+static void sbp2util_write_doorbell(struct work_struct *work)
{
- sbp2util_notify_fetch_agent(p, SBP2_DOORBELL_OFFSET, NULL, 4);
+ struct sbp2_lu *lu = container_of(work, struct sbp2_lu, protocol_work);
+
+ sbp2util_notify_fetch_agent(lu, SBP2_DOORBELL_OFFSET, NULL, 4);
}
-/*
- * This function is called to create a pool of command orbs used for
- * command processing. It is called when a new sbp2 device is detected.
- */
-static int sbp2util_create_command_orb_pool(struct scsi_id_instance_data *scsi_id)
+static int sbp2util_create_command_orb_pool(struct sbp2_lu *lu)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
int i;
unsigned long flags, orbs;
- struct sbp2_command_info *command;
+ struct sbp2_command_info *cmd;
- orbs = serialize_io ? 2 : SBP2_MAX_CMDS;
+ orbs = sbp2_serialize_io ? 2 : SBP2_MAX_CMDS;
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
for (i = 0; i < orbs; i++) {
- command = kzalloc(sizeof(*command), GFP_ATOMIC);
- if (!command) {
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock,
- flags);
+ cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+ if (!cmd) {
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
return -ENOMEM;
}
- command->command_orb_dma =
- pci_map_single(hi->host->pdev, &command->command_orb,
- sizeof(struct sbp2_command_orb),
- PCI_DMA_TODEVICE);
- SBP2_DMA_ALLOC("single command orb DMA");
- command->sge_dma =
- pci_map_single(hi->host->pdev,
- &command->scatter_gather_element,
- sizeof(command->scatter_gather_element),
- PCI_DMA_BIDIRECTIONAL);
- SBP2_DMA_ALLOC("scatter_gather_element");
- INIT_LIST_HEAD(&command->list);
- list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed);
- }
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ cmd->command_orb_dma = dma_map_single(&hi->host->device,
+ &cmd->command_orb,
+ sizeof(struct sbp2_command_orb),
+ DMA_TO_DEVICE);
+ cmd->sge_dma = dma_map_single(&hi->host->device,
+ &cmd->scatter_gather_element,
+ sizeof(cmd->scatter_gather_element),
+ DMA_BIDIRECTIONAL);
+ INIT_LIST_HEAD(&cmd->list);
+ list_add_tail(&cmd->list, &lu->cmd_orb_completed);
+ }
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
return 0;
}
-/*
- * This function is called to delete a pool of command orbs.
- */
-static void sbp2util_remove_command_orb_pool(struct scsi_id_instance_data *scsi_id)
+static void sbp2util_remove_command_orb_pool(struct sbp2_lu *lu)
{
- struct hpsb_host *host = scsi_id->hi->host;
+ struct hpsb_host *host = lu->hi->host;
struct list_head *lh, *next;
- struct sbp2_command_info *command;
+ struct sbp2_command_info *cmd;
unsigned long flags;
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- if (!list_empty(&scsi_id->sbp2_command_orb_completed)) {
- list_for_each_safe(lh, next, &scsi_id->sbp2_command_orb_completed) {
- command = list_entry(lh, struct sbp2_command_info, list);
-
- /* Release our generic DMA's */
- pci_unmap_single(host->pdev, command->command_orb_dma,
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ if (!list_empty(&lu->cmd_orb_completed))
+ list_for_each_safe(lh, next, &lu->cmd_orb_completed) {
+ cmd = list_entry(lh, struct sbp2_command_info, list);
+ dma_unmap_single(&host->device, cmd->command_orb_dma,
sizeof(struct sbp2_command_orb),
- PCI_DMA_TODEVICE);
- SBP2_DMA_FREE("single command orb DMA");
- pci_unmap_single(host->pdev, command->sge_dma,
- sizeof(command->scatter_gather_element),
- PCI_DMA_BIDIRECTIONAL);
- SBP2_DMA_FREE("scatter_gather_element");
-
- kfree(command);
+ DMA_TO_DEVICE);
+ dma_unmap_single(&host->device, cmd->sge_dma,
+ sizeof(cmd->scatter_gather_element),
+ DMA_BIDIRECTIONAL);
+ kfree(cmd);
}
- }
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
return;
}
/*
- * This function finds the sbp2_command for a given outstanding command
- * orb.Only looks at the inuse list.
+ * Finds the sbp2_command for a given outstanding command ORB.
+ * Only looks at the in-use list.
*/
static struct sbp2_command_info *sbp2util_find_command_for_orb(
- struct scsi_id_instance_data *scsi_id, dma_addr_t orb)
+ struct sbp2_lu *lu, dma_addr_t orb)
{
- struct sbp2_command_info *command;
+ struct sbp2_command_info *cmd;
unsigned long flags;
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- if (!list_empty(&scsi_id->sbp2_command_orb_inuse)) {
- list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list) {
- if (command->command_orb_dma == orb) {
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
- return command;
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ if (!list_empty(&lu->cmd_orb_inuse))
+ list_for_each_entry(cmd, &lu->cmd_orb_inuse, list)
+ if (cmd->command_orb_dma == orb) {
+ spin_unlock_irqrestore(
+ &lu->cmd_orb_lock, flags);
+ return cmd;
}
- }
- }
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
-
- SBP2_ORB_DEBUG("could not match command orb %x", (unsigned int)orb);
-
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
return NULL;
}
/*
- * This function finds the sbp2_command for a given outstanding SCpnt.
- * Only looks at the inuse list.
- * Must be called with scsi_id->sbp2_command_orb_lock held.
+ * Finds the sbp2_command for a given outstanding SCpnt.
+ * Only looks at the in-use list.
+ * Must be called with lu->cmd_orb_lock held.
*/
static struct sbp2_command_info *sbp2util_find_command_for_SCpnt(
- struct scsi_id_instance_data *scsi_id, void *SCpnt)
+ struct sbp2_lu *lu, void *SCpnt)
{
- struct sbp2_command_info *command;
+ struct sbp2_command_info *cmd;
- if (!list_empty(&scsi_id->sbp2_command_orb_inuse))
- list_for_each_entry(command, &scsi_id->sbp2_command_orb_inuse, list)
- if (command->Current_SCpnt == SCpnt)
- return command;
+ if (!list_empty(&lu->cmd_orb_inuse))
+ list_for_each_entry(cmd, &lu->cmd_orb_inuse, list)
+ if (cmd->Current_SCpnt == SCpnt)
+ return cmd;
return NULL;
}
-/*
- * This function allocates a command orb used to send a scsi command.
- */
static struct sbp2_command_info *sbp2util_allocate_command_orb(
- struct scsi_id_instance_data *scsi_id,
- struct scsi_cmnd *Current_SCpnt,
- void (*Current_done)(struct scsi_cmnd *))
+ struct sbp2_lu *lu,
+ struct scsi_cmnd *Current_SCpnt,
+ void (*Current_done)(struct scsi_cmnd *))
{
struct list_head *lh;
- struct sbp2_command_info *command = NULL;
+ struct sbp2_command_info *cmd = NULL;
unsigned long flags;
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- if (!list_empty(&scsi_id->sbp2_command_orb_completed)) {
- lh = scsi_id->sbp2_command_orb_completed.next;
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ if (!list_empty(&lu->cmd_orb_completed)) {
+ lh = lu->cmd_orb_completed.next;
list_del(lh);
- command = list_entry(lh, struct sbp2_command_info, list);
- command->Current_done = Current_done;
- command->Current_SCpnt = Current_SCpnt;
- list_add_tail(&command->list, &scsi_id->sbp2_command_orb_inuse);
- } else {
+ cmd = list_entry(lh, struct sbp2_command_info, list);
+ cmd->Current_done = Current_done;
+ cmd->Current_SCpnt = Current_SCpnt;
+ list_add_tail(&cmd->list, &lu->cmd_orb_inuse);
+ } else
SBP2_ERR("%s: no orbs available", __FUNCTION__);
- }
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
- return command;
-}
-
-/* Free our DMA's */
-static void sbp2util_free_command_dma(struct sbp2_command_info *command)
-{
- struct scsi_id_instance_data *scsi_id =
- (struct scsi_id_instance_data *)command->Current_SCpnt->device->host->hostdata[0];
- struct hpsb_host *host;
-
- if (!scsi_id) {
- SBP2_ERR("%s: scsi_id == NULL", __FUNCTION__);
- return;
- }
-
- host = scsi_id->ud->ne->host;
-
- if (command->cmd_dma) {
- if (command->dma_type == CMD_DMA_SINGLE) {
- pci_unmap_single(host->pdev, command->cmd_dma,
- command->dma_size, command->dma_dir);
- SBP2_DMA_FREE("single bulk");
- } else if (command->dma_type == CMD_DMA_PAGE) {
- pci_unmap_page(host->pdev, command->cmd_dma,
- command->dma_size, command->dma_dir);
- SBP2_DMA_FREE("single page");
- } /* XXX: Check for CMD_DMA_NONE bug */
- command->dma_type = CMD_DMA_NONE;
- command->cmd_dma = 0;
- }
-
- if (command->sge_buffer) {
- pci_unmap_sg(host->pdev, command->sge_buffer,
- command->dma_size, command->dma_dir);
- SBP2_DMA_FREE("scatter list");
- command->sge_buffer = NULL;
- }
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
+ return cmd;
}
/*
- * This function moves a command to the completed orb list.
- * Must be called with scsi_id->sbp2_command_orb_lock held.
+ * Unmaps the DMAs of a command and moves the command to the completed ORB list.
+ * Must be called with lu->cmd_orb_lock held.
*/
-static void sbp2util_mark_command_completed(
- struct scsi_id_instance_data *scsi_id,
- struct sbp2_command_info *command)
+static void sbp2util_mark_command_completed(struct sbp2_lu *lu,
+ struct sbp2_command_info *cmd)
{
- list_del(&command->list);
- sbp2util_free_command_dma(command);
- list_add_tail(&command->list, &scsi_id->sbp2_command_orb_completed);
+ struct hpsb_host *host = lu->ud->ne->host;
+
+ if (cmd->cmd_dma) {
+ if (cmd->dma_type == CMD_DMA_SINGLE)
+ dma_unmap_single(&host->device, cmd->cmd_dma,
+ cmd->dma_size, cmd->dma_dir);
+ else if (cmd->dma_type == CMD_DMA_PAGE)
+ dma_unmap_page(&host->device, cmd->cmd_dma,
+ cmd->dma_size, cmd->dma_dir);
+ /* XXX: Check for CMD_DMA_NONE bug */
+ cmd->dma_type = CMD_DMA_NONE;
+ cmd->cmd_dma = 0;
+ }
+ if (cmd->sge_buffer) {
+ dma_unmap_sg(&host->device, cmd->sge_buffer,
+ cmd->dma_size, cmd->dma_dir);
+ cmd->sge_buffer = NULL;
+ }
+ list_move_tail(&cmd->list, &lu->cmd_orb_completed);
}
/*
- * Is scsi_id valid? Is the 1394 node still present?
+ * Is lu valid? Is the 1394 node still present?
*/
-static inline int sbp2util_node_is_available(struct scsi_id_instance_data *scsi_id)
+static inline int sbp2util_node_is_available(struct sbp2_lu *lu)
{
- return scsi_id && scsi_id->ne && !scsi_id->ne->in_limbo;
+ return lu && lu->ne && !lu->ne->in_limbo;
}
/*********************************************
* IEEE-1394 core driver stack related section
*********************************************/
-static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud);
static int sbp2_probe(struct device *dev)
{
struct unit_directory *ud;
- struct scsi_id_instance_data *scsi_id;
-
- SBP2_DEBUG_ENTER();
+ struct sbp2_lu *lu;
ud = container_of(dev, struct unit_directory, device);
@@ -726,67 +642,58 @@ static int sbp2_probe(struct device *dev)
if (ud->flags & UNIT_DIRECTORY_HAS_LUN_DIRECTORY)
return -ENODEV;
- scsi_id = sbp2_alloc_device(ud);
-
- if (!scsi_id)
+ lu = sbp2_alloc_device(ud);
+ if (!lu)
return -ENOMEM;
- sbp2_parse_unit_directory(scsi_id, ud);
-
- return sbp2_start_device(scsi_id);
+ sbp2_parse_unit_directory(lu, ud);
+ return sbp2_start_device(lu);
}
static int sbp2_remove(struct device *dev)
{
struct unit_directory *ud;
- struct scsi_id_instance_data *scsi_id;
+ struct sbp2_lu *lu;
struct scsi_device *sdev;
- SBP2_DEBUG_ENTER();
-
ud = container_of(dev, struct unit_directory, device);
- scsi_id = ud->device.driver_data;
- if (!scsi_id)
+ lu = ud->device.driver_data;
+ if (!lu)
return 0;
- if (scsi_id->scsi_host) {
+ if (lu->shost) {
/* Get rid of enqueued commands if there is no chance to
* send them. */
- if (!sbp2util_node_is_available(scsi_id))
- sbp2scsi_complete_all_commands(scsi_id, DID_NO_CONNECT);
- /* scsi_remove_device() will trigger shutdown functions of SCSI
+ if (!sbp2util_node_is_available(lu))
+ sbp2scsi_complete_all_commands(lu, DID_NO_CONNECT);
+ /* scsi_remove_device() may trigger shutdown functions of SCSI
* highlevel drivers which would deadlock if blocked. */
- atomic_set(&scsi_id->state, SBP2LU_STATE_IN_SHUTDOWN);
- scsi_unblock_requests(scsi_id->scsi_host);
+ atomic_set(&lu->state, SBP2LU_STATE_IN_SHUTDOWN);
+ scsi_unblock_requests(lu->shost);
}
- sdev = scsi_id->sdev;
+ sdev = lu->sdev;
if (sdev) {
- scsi_id->sdev = NULL;
+ lu->sdev = NULL;
scsi_remove_device(sdev);
}
- sbp2_logout_device(scsi_id);
- sbp2_remove_device(scsi_id);
+ sbp2_logout_device(lu);
+ sbp2_remove_device(lu);
return 0;
}
static int sbp2_update(struct unit_directory *ud)
{
- struct scsi_id_instance_data *scsi_id = ud->device.driver_data;
-
- SBP2_DEBUG_ENTER();
+ struct sbp2_lu *lu = ud->device.driver_data;
- if (sbp2_reconnect_device(scsi_id)) {
+ if (sbp2_reconnect_device(lu)) {
+ /* Reconnect has failed. Perhaps we didn't reconnect fast
+ * enough. Try a regular login, but first log out just in
+ * case of any weirdness. */
+ sbp2_logout_device(lu);
- /*
- * Ok, reconnect has failed. Perhaps we didn't
- * reconnect fast enough. Try doing a regular login, but
- * first do a logout just in case of any weirdness.
- */
- sbp2_logout_device(scsi_id);
-
- if (sbp2_login_device(scsi_id)) {
+ if (sbp2_login_device(lu)) {
/* Login failed too, just fail, and the backend
* will call our sbp2_remove for us */
SBP2_ERR("Failed to reconnect to sbp2 device!");
@@ -794,69 +701,59 @@ static int sbp2_update(struct unit_directory *ud)
}
}
- /* Set max retries to something large on the device. */
- sbp2_set_busy_timeout(scsi_id);
+ sbp2_set_busy_timeout(lu);
+ sbp2_agent_reset(lu, 1);
+ sbp2_max_speed_and_size(lu);
- /* Do a SBP-2 fetch agent reset. */
- sbp2_agent_reset(scsi_id, 1);
-
- /* Get the max speed and packet size that we can use. */
- sbp2_max_speed_and_size(scsi_id);
-
- /* Complete any pending commands with busy (so they get
- * retried) and remove them from our queue
- */
- sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY);
+ /* Complete any pending commands with busy (so they get retried)
+ * and remove them from our queue. */
+ sbp2scsi_complete_all_commands(lu, DID_BUS_BUSY);
/* Accept new commands unless there was another bus reset in the
* meantime. */
- if (hpsb_node_entry_valid(scsi_id->ne)) {
- atomic_set(&scsi_id->state, SBP2LU_STATE_RUNNING);
- scsi_unblock_requests(scsi_id->scsi_host);
+ if (hpsb_node_entry_valid(lu->ne)) {
+ atomic_set(&lu->state, SBP2LU_STATE_RUNNING);
+ scsi_unblock_requests(lu->shost);
}
return 0;
}
-/* This functions is called by the sbp2_probe, for each new device. We now
- * allocate one scsi host for each scsi_id (unit directory). */
-static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud)
+static struct sbp2_lu *sbp2_alloc_device(struct unit_directory *ud)
{
- struct sbp2scsi_host_info *hi;
- struct Scsi_Host *scsi_host = NULL;
- struct scsi_id_instance_data *scsi_id = NULL;
+ struct sbp2_fwhost_info *hi;
+ struct Scsi_Host *shost = NULL;
+ struct sbp2_lu *lu = NULL;
- SBP2_DEBUG_ENTER();
-
- scsi_id = kzalloc(sizeof(*scsi_id), GFP_KERNEL);
- if (!scsi_id) {
- SBP2_ERR("failed to create scsi_id");
+ lu = kzalloc(sizeof(*lu), GFP_KERNEL);
+ if (!lu) {
+ SBP2_ERR("failed to create lu");
goto failed_alloc;
}
- scsi_id->ne = ud->ne;
- scsi_id->ud = ud;
- scsi_id->speed_code = IEEE1394_SPEED_100;
- scsi_id->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100];
- scsi_id->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE;
- INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_inuse);
- INIT_LIST_HEAD(&scsi_id->sbp2_command_orb_completed);
- INIT_LIST_HEAD(&scsi_id->scsi_list);
- spin_lock_init(&scsi_id->sbp2_command_orb_lock);
- atomic_set(&scsi_id->state, SBP2LU_STATE_RUNNING);
- INIT_WORK(&scsi_id->protocol_work, NULL, NULL);
+ lu->ne = ud->ne;
+ lu->ud = ud;
+ lu->speed_code = IEEE1394_SPEED_100;
+ lu->max_payload_size = sbp2_speedto_max_payload[IEEE1394_SPEED_100];
+ lu->status_fifo_addr = CSR1212_INVALID_ADDR_SPACE;
+ INIT_LIST_HEAD(&lu->cmd_orb_inuse);
+ INIT_LIST_HEAD(&lu->cmd_orb_completed);
+ INIT_LIST_HEAD(&lu->lu_list);
+ spin_lock_init(&lu->cmd_orb_lock);
+ atomic_set(&lu->state, SBP2LU_STATE_RUNNING);
+ INIT_WORK(&lu->protocol_work, NULL);
- ud->device.driver_data = scsi_id;
+ ud->device.driver_data = lu;
hi = hpsb_get_hostinfo(&sbp2_highlevel, ud->ne->host);
if (!hi) {
- hi = hpsb_create_hostinfo(&sbp2_highlevel, ud->ne->host, sizeof(*hi));
+ hi = hpsb_create_hostinfo(&sbp2_highlevel, ud->ne->host,
+ sizeof(*hi));
if (!hi) {
SBP2_ERR("failed to allocate hostinfo");
goto failed_alloc;
}
- SBP2_DEBUG("sbp2_alloc_device: allocated hostinfo");
hi->host = ud->ne->host;
- INIT_LIST_HEAD(&hi->scsi_ids);
+ INIT_LIST_HEAD(&hi->logical_units);
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
/* Handle data movement if physical dma is not
@@ -876,9 +773,9 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
goto failed_alloc;
}
- scsi_id->hi = hi;
+ lu->hi = hi;
- list_add_tail(&scsi_id->scsi_list, &hi->scsi_ids);
+ list_add_tail(&lu->lu_list, &hi->logical_units);
/* Register the status FIFO address range. We could use the same FIFO
* for targets at different nodes. However we need different FIFOs per
@@ -888,302 +785,214 @@ static struct scsi_id_instance_data *sbp2_alloc_device(struct unit_directory *ud
* then be performed as unified transactions. This slightly reduces
* bandwidth usage, and some Prolific based devices seem to require it.
*/
- scsi_id->status_fifo_addr = hpsb_allocate_and_register_addrspace(
+ lu->status_fifo_addr = hpsb_allocate_and_register_addrspace(
&sbp2_highlevel, ud->ne->host, &sbp2_ops,
sizeof(struct sbp2_status_block), sizeof(quadlet_t),
ud->ne->host->low_addr_space, CSR1212_ALL_SPACE_END);
- if (scsi_id->status_fifo_addr == CSR1212_INVALID_ADDR_SPACE) {
+ if (lu->status_fifo_addr == CSR1212_INVALID_ADDR_SPACE) {
SBP2_ERR("failed to allocate status FIFO address range");
goto failed_alloc;
}
- /* Register our host with the SCSI stack. */
- scsi_host = scsi_host_alloc(&scsi_driver_template,
- sizeof(unsigned long));
- if (!scsi_host) {
+ shost = scsi_host_alloc(&sbp2_shost_template, sizeof(unsigned long));
+ if (!shost) {
SBP2_ERR("failed to register scsi host");
goto failed_alloc;
}
- scsi_host->hostdata[0] = (unsigned long)scsi_id;
+ shost->hostdata[0] = (unsigned long)lu;
- if (!scsi_add_host(scsi_host, &ud->device)) {
- scsi_id->scsi_host = scsi_host;
- return scsi_id;
+ if (!scsi_add_host(shost, &ud->device)) {
+ lu->shost = shost;
+ return lu;
}
SBP2_ERR("failed to add scsi host");
- scsi_host_put(scsi_host);
+ scsi_host_put(shost);
failed_alloc:
- sbp2_remove_device(scsi_id);
+ sbp2_remove_device(lu);
return NULL;
}
static void sbp2_host_reset(struct hpsb_host *host)
{
- struct sbp2scsi_host_info *hi;
- struct scsi_id_instance_data *scsi_id;
+ struct sbp2_fwhost_info *hi;
+ struct sbp2_lu *lu;
hi = hpsb_get_hostinfo(&sbp2_highlevel, host);
if (!hi)
return;
- list_for_each_entry(scsi_id, &hi->scsi_ids, scsi_list)
- if (likely(atomic_read(&scsi_id->state) !=
+ list_for_each_entry(lu, &hi->logical_units, lu_list)
+ if (likely(atomic_read(&lu->state) !=
SBP2LU_STATE_IN_SHUTDOWN)) {
- atomic_set(&scsi_id->state, SBP2LU_STATE_IN_RESET);
- scsi_block_requests(scsi_id->scsi_host);
+ atomic_set(&lu->state, SBP2LU_STATE_IN_RESET);
+ scsi_block_requests(lu->shost);
}
}
-/*
- * This function is where we first pull the node unique ids, and then
- * allocate memory and register a SBP-2 device.
- */
-static int sbp2_start_device(struct scsi_id_instance_data *scsi_id)
+static int sbp2_start_device(struct sbp2_lu *lu)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
int error;
- SBP2_DEBUG_ENTER();
-
- /* Login FIFO DMA */
- scsi_id->login_response =
- pci_alloc_consistent(hi->host->pdev,
+ lu->login_response = dma_alloc_coherent(&hi->host->device,
sizeof(struct sbp2_login_response),
- &scsi_id->login_response_dma);
- if (!scsi_id->login_response)
+ &lu->login_response_dma, GFP_KERNEL);
+ if (!lu->login_response)
goto alloc_fail;
- SBP2_DMA_ALLOC("consistent DMA region for login FIFO");
- /* Query logins ORB DMA */
- scsi_id->query_logins_orb =
- pci_alloc_consistent(hi->host->pdev,
+ lu->query_logins_orb = dma_alloc_coherent(&hi->host->device,
sizeof(struct sbp2_query_logins_orb),
- &scsi_id->query_logins_orb_dma);
- if (!scsi_id->query_logins_orb)
+ &lu->query_logins_orb_dma, GFP_KERNEL);
+ if (!lu->query_logins_orb)
goto alloc_fail;
- SBP2_DMA_ALLOC("consistent DMA region for query logins ORB");
- /* Query logins response DMA */
- scsi_id->query_logins_response =
- pci_alloc_consistent(hi->host->pdev,
+ lu->query_logins_response = dma_alloc_coherent(&hi->host->device,
sizeof(struct sbp2_query_logins_response),
- &scsi_id->query_logins_response_dma);
- if (!scsi_id->query_logins_response)
+ &lu->query_logins_response_dma, GFP_KERNEL);
+ if (!lu->query_logins_response)
goto alloc_fail;
- SBP2_DMA_ALLOC("consistent DMA region for query logins response");
- /* Reconnect ORB DMA */
- scsi_id->reconnect_orb =
- pci_alloc_consistent(hi->host->pdev,
+ lu->reconnect_orb = dma_alloc_coherent(&hi->host->device,
sizeof(struct sbp2_reconnect_orb),
- &scsi_id->reconnect_orb_dma);
- if (!scsi_id->reconnect_orb)
+ &lu->reconnect_orb_dma, GFP_KERNEL);
+ if (!lu->reconnect_orb)
goto alloc_fail;
- SBP2_DMA_ALLOC("consistent DMA region for reconnect ORB");
- /* Logout ORB DMA */
- scsi_id->logout_orb =
- pci_alloc_consistent(hi->host->pdev,
+ lu->logout_orb = dma_alloc_coherent(&hi->host->device,
sizeof(struct sbp2_logout_orb),
- &scsi_id->logout_orb_dma);
- if (!scsi_id->logout_orb)
+ &lu->logout_orb_dma, GFP_KERNEL);
+ if (!lu->logout_orb)
goto alloc_fail;
- SBP2_DMA_ALLOC("consistent DMA region for logout ORB");
- /* Login ORB DMA */
- scsi_id->login_orb =
- pci_alloc_consistent(hi->host->pdev,
+ lu->login_orb = dma_alloc_coherent(&hi->host->device,
sizeof(struct sbp2_login_orb),
- &scsi_id->login_orb_dma);
- if (!scsi_id->login_orb)
+ &lu->login_orb_dma, GFP_KERNEL);
+ if (!lu->login_orb)
goto alloc_fail;
- SBP2_DMA_ALLOC("consistent DMA region for login ORB");
-
- SBP2_DEBUG("New SBP-2 device inserted, SCSI ID = %x", scsi_id->ud->id);
- /*
- * Create our command orb pool
- */
- if (sbp2util_create_command_orb_pool(scsi_id)) {
+ if (sbp2util_create_command_orb_pool(lu)) {
SBP2_ERR("sbp2util_create_command_orb_pool failed!");
- sbp2_remove_device(scsi_id);
+ sbp2_remove_device(lu);
return -ENOMEM;
}
- /* Schedule a timeout here. The reason is that we may be so close
- * to a bus reset, that the device is not available for logins.
- * This can happen when the bus reset is caused by the host
- * connected to the sbp2 device being removed. That host would
- * have a certain amount of time to relogin before the sbp2 device
- * allows someone else to login instead. One second makes sense. */
+ /* Wait a second before trying to log in. Previously logged in
+ * initiators need a chance to reconnect. */
if (msleep_interruptible(1000)) {
- sbp2_remove_device(scsi_id);
+ sbp2_remove_device(lu);
return -EINTR;
}
- /*
- * Login to the sbp-2 device
- */
- if (sbp2_login_device(scsi_id)) {
- /* Login failed, just remove the device. */
- sbp2_remove_device(scsi_id);
+ if (sbp2_login_device(lu)) {
+ sbp2_remove_device(lu);
return -EBUSY;
}
- /*
- * Set max retries to something large on the device
- */
- sbp2_set_busy_timeout(scsi_id);
-
- /*
- * Do a SBP-2 fetch agent reset
- */
- sbp2_agent_reset(scsi_id, 1);
+ sbp2_set_busy_timeout(lu);
+ sbp2_agent_reset(lu, 1);
+ sbp2_max_speed_and_size(lu);
- /*
- * Get the max speed and packet size that we can use
- */
- sbp2_max_speed_and_size(scsi_id);
-
- /* Add this device to the scsi layer now */
- error = scsi_add_device(scsi_id->scsi_host, 0, scsi_id->ud->id, 0);
+ error = scsi_add_device(lu->shost, 0, lu->ud->id, 0);
if (error) {
SBP2_ERR("scsi_add_device failed");
- sbp2_logout_device(scsi_id);
- sbp2_remove_device(scsi_id);
+ sbp2_logout_device(lu);
+ sbp2_remove_device(lu);
return error;
}
return 0;
alloc_fail:
- SBP2_ERR("Could not allocate memory for scsi_id");
- sbp2_remove_device(scsi_id);
+ SBP2_ERR("Could not allocate memory for lu");
+ sbp2_remove_device(lu);
return -ENOMEM;
}
-/*
- * This function removes an sbp2 device from the sbp2scsi_host_info struct.
- */
-static void sbp2_remove_device(struct scsi_id_instance_data *scsi_id)
+static void sbp2_remove_device(struct sbp2_lu *lu)
{
- struct sbp2scsi_host_info *hi;
-
- SBP2_DEBUG_ENTER();
+ struct sbp2_fwhost_info *hi;
- if (!scsi_id)
+ if (!lu)
return;
- hi = scsi_id->hi;
+ hi = lu->hi;
- /* This will remove our scsi device aswell */
- if (scsi_id->scsi_host) {
- scsi_remove_host(scsi_id->scsi_host);
- scsi_host_put(scsi_id->scsi_host);
+ if (lu->shost) {
+ scsi_remove_host(lu->shost);
+ scsi_host_put(lu->shost);
}
flush_scheduled_work();
- sbp2util_remove_command_orb_pool(scsi_id);
+ sbp2util_remove_command_orb_pool(lu);
- list_del(&scsi_id->scsi_list);
+ list_del(&lu->lu_list);
- if (scsi_id->login_response) {
- pci_free_consistent(hi->host->pdev,
+ if (lu->login_response)
+ dma_free_coherent(&hi->host->device,
sizeof(struct sbp2_login_response),
- scsi_id->login_response,
- scsi_id->login_response_dma);
- SBP2_DMA_FREE("single login FIFO");
- }
-
- if (scsi_id->login_orb) {
- pci_free_consistent(hi->host->pdev,
+ lu->login_response,
+ lu->login_response_dma);
+ if (lu->login_orb)
+ dma_free_coherent(&hi->host->device,
sizeof(struct sbp2_login_orb),
- scsi_id->login_orb,
- scsi_id->login_orb_dma);
- SBP2_DMA_FREE("single login ORB");
- }
-
- if (scsi_id->reconnect_orb) {
- pci_free_consistent(hi->host->pdev,
+ lu->login_orb,
+ lu->login_orb_dma);
+ if (lu->reconnect_orb)
+ dma_free_coherent(&hi->host->device,
sizeof(struct sbp2_reconnect_orb),
- scsi_id->reconnect_orb,
- scsi_id->reconnect_orb_dma);
- SBP2_DMA_FREE("single reconnect orb");
- }
-
- if (scsi_id->logout_orb) {
- pci_free_consistent(hi->host->pdev,
+ lu->reconnect_orb,
+ lu->reconnect_orb_dma);
+ if (lu->logout_orb)
+ dma_free_coherent(&hi->host->device,
sizeof(struct sbp2_logout_orb),
- scsi_id->logout_orb,
- scsi_id->logout_orb_dma);
- SBP2_DMA_FREE("single logout orb");
- }
-
- if (scsi_id->query_logins_orb) {
- pci_free_consistent(hi->host->pdev,
+ lu->logout_orb,
+ lu->logout_orb_dma);
+ if (lu->query_logins_orb)
+ dma_free_coherent(&hi->host->device,
sizeof(struct sbp2_query_logins_orb),
- scsi_id->query_logins_orb,
- scsi_id->query_logins_orb_dma);
- SBP2_DMA_FREE("single query logins orb");
- }
-
- if (scsi_id->query_logins_response) {
- pci_free_consistent(hi->host->pdev,
+ lu->query_logins_orb,
+ lu->query_logins_orb_dma);
+ if (lu->query_logins_response)
+ dma_free_coherent(&hi->host->device,
sizeof(struct sbp2_query_logins_response),
- scsi_id->query_logins_response,
- scsi_id->query_logins_response_dma);
- SBP2_DMA_FREE("single query logins data");
- }
+ lu->query_logins_response,
+ lu->query_logins_response_dma);
- if (scsi_id->status_fifo_addr != CSR1212_INVALID_ADDR_SPACE)
+ if (lu->status_fifo_addr != CSR1212_INVALID_ADDR_SPACE)
hpsb_unregister_addrspace(&sbp2_highlevel, hi->host,
- scsi_id->status_fifo_addr);
+ lu->status_fifo_addr);
- scsi_id->ud->device.driver_data = NULL;
+ lu->ud->device.driver_data = NULL;
if (hi)
module_put(hi->host->driver->owner);
- SBP2_DEBUG("SBP-2 device removed, SCSI ID = %d", scsi_id->ud->id);
-
- kfree(scsi_id);
+ kfree(lu);
}
#ifdef CONFIG_IEEE1394_SBP2_PHYS_DMA
/*
- * This function deals with physical dma write requests (for adapters that do not support
- * physical dma in hardware). Mostly just here for debugging...
+ * Deal with write requests on adapters which do not support physical DMA or
+ * have it switched off.
*/
static int sbp2_handle_physdma_write(struct hpsb_host *host, int nodeid,
int destid, quadlet_t *data, u64 addr,
size_t length, u16 flags)
{
-
- /*
- * Manually put the data in the right place.
- */
memcpy(bus_to_virt((u32) addr), data, length);
- sbp2util_packet_dump(data, length, "sbp2 phys dma write by device",
- (u32) addr);
return RCODE_COMPLETE;
}
/*
- * This function deals with physical dma read requests (for adapters that do not support
- * physical dma in hardware). Mostly just here for debugging...
+ * Deal with read requests on adapters which do not support physical DMA or
+ * have it switched off.
*/
static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid,
quadlet_t *data, u64 addr, size_t length,
u16 flags)
{
-
- /*
- * Grab data from memory and send a read response.
- */
memcpy(data, bus_to_virt((u32) addr), length);
- sbp2util_packet_dump(data, length, "sbp2 phys dma read by device",
- (u32) addr);
return RCODE_COMPLETE;
}
#endif
@@ -1192,74 +1001,69 @@ static int sbp2_handle_physdma_read(struct hpsb_host *host, int nodeid,
* SBP-2 protocol related section
**************************************/
-/*
- * This function queries the device for the maximum concurrent logins it
- * supports.
- */
-static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
+static int sbp2_query_logins(struct sbp2_lu *lu)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
quadlet_t data[2];
int max_logins;
int active_logins;
- SBP2_DEBUG_ENTER();
-
- scsi_id->query_logins_orb->reserved1 = 0x0;
- scsi_id->query_logins_orb->reserved2 = 0x0;
-
- scsi_id->query_logins_orb->query_response_lo = scsi_id->query_logins_response_dma;
- scsi_id->query_logins_orb->query_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
+ lu->query_logins_orb->reserved1 = 0x0;
+ lu->query_logins_orb->reserved2 = 0x0;
- scsi_id->query_logins_orb->lun_misc = ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST);
- scsi_id->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1);
- scsi_id->query_logins_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun);
+ lu->query_logins_orb->query_response_lo = lu->query_logins_response_dma;
+ lu->query_logins_orb->query_response_hi =
+ ORB_SET_NODE_ID(hi->host->node_id);
+ lu->query_logins_orb->lun_misc =
+ ORB_SET_FUNCTION(SBP2_QUERY_LOGINS_REQUEST);
+ lu->query_logins_orb->lun_misc |= ORB_SET_NOTIFY(1);
+ lu->query_logins_orb->lun_misc |= ORB_SET_LUN(lu->lun);
- scsi_id->query_logins_orb->reserved_resp_length =
- ORB_SET_QUERY_LOGINS_RESP_LENGTH(sizeof(struct sbp2_query_logins_response));
+ lu->query_logins_orb->reserved_resp_length =
+ ORB_SET_QUERY_LOGINS_RESP_LENGTH(
+ sizeof(struct sbp2_query_logins_response));
- scsi_id->query_logins_orb->status_fifo_hi =
- ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
- scsi_id->query_logins_orb->status_fifo_lo =
- ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
+ lu->query_logins_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id);
+ lu->query_logins_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr);
- sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb));
+ sbp2util_cpu_to_be32_buffer(lu->query_logins_orb,
+ sizeof(struct sbp2_query_logins_orb));
- sbp2util_packet_dump(scsi_id->query_logins_orb, sizeof(struct sbp2_query_logins_orb),
- "sbp2 query logins orb", scsi_id->query_logins_orb_dma);
-
- memset(scsi_id->query_logins_response, 0, sizeof(struct sbp2_query_logins_response));
+ memset(lu->query_logins_response, 0,
+ sizeof(struct sbp2_query_logins_response));
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
- data[1] = scsi_id->query_logins_orb_dma;
+ data[1] = lu->query_logins_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
+ hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8);
- if (sbp2util_access_timeout(scsi_id, 2*HZ)) {
+ if (sbp2util_access_timeout(lu, 2*HZ)) {
SBP2_INFO("Error querying logins to SBP-2 device - timed out");
return -EIO;
}
- if (scsi_id->status_block.ORB_offset_lo != scsi_id->query_logins_orb_dma) {
+ if (lu->status_block.ORB_offset_lo != lu->query_logins_orb_dma) {
SBP2_INFO("Error querying logins to SBP-2 device - timed out");
return -EIO;
}
- if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) {
SBP2_INFO("Error querying logins to SBP-2 device - failed");
return -EIO;
}
- sbp2util_cpu_to_be32_buffer(scsi_id->query_logins_response, sizeof(struct sbp2_query_logins_response));
-
- SBP2_DEBUG("length_max_logins = %x",
- (unsigned int)scsi_id->query_logins_response->length_max_logins);
+ sbp2util_cpu_to_be32_buffer(lu->query_logins_response,
+ sizeof(struct sbp2_query_logins_response));
- max_logins = RESPONSE_GET_MAX_LOGINS(scsi_id->query_logins_response->length_max_logins);
+ max_logins = RESPONSE_GET_MAX_LOGINS(
+ lu->query_logins_response->length_max_logins);
SBP2_INFO("Maximum concurrent logins supported: %d", max_logins);
- active_logins = RESPONSE_GET_ACTIVE_LOGINS(scsi_id->query_logins_response->length_max_logins);
+ active_logins = RESPONSE_GET_ACTIVE_LOGINS(
+ lu->query_logins_response->length_max_logins);
SBP2_INFO("Number of active logins: %d", active_logins);
if (active_logins >= max_logins) {
@@ -1269,332 +1073,231 @@ static int sbp2_query_logins(struct scsi_id_instance_data *scsi_id)
return 0;
}
-/*
- * This function is called in order to login to a particular SBP-2 device,
- * after a bus reset.
- */
-static int sbp2_login_device(struct scsi_id_instance_data *scsi_id)
+static int sbp2_login_device(struct sbp2_lu *lu)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
quadlet_t data[2];
- SBP2_DEBUG_ENTER();
-
- if (!scsi_id->login_orb) {
- SBP2_DEBUG("%s: login_orb not alloc'd!", __FUNCTION__);
+ if (!lu->login_orb)
return -EIO;
- }
- if (!exclusive_login) {
- if (sbp2_query_logins(scsi_id)) {
- SBP2_INFO("Device does not support any more concurrent logins");
- return -EIO;
- }
+ if (!sbp2_exclusive_login && sbp2_query_logins(lu)) {
+ SBP2_INFO("Device does not support any more concurrent logins");
+ return -EIO;
}
- /* Set-up login ORB, assume no password */
- scsi_id->login_orb->password_hi = 0;
- scsi_id->login_orb->password_lo = 0;
+ /* assume no password */
+ lu->login_orb->password_hi = 0;
+ lu->login_orb->password_lo = 0;
- scsi_id->login_orb->login_response_lo = scsi_id->login_response_dma;
- scsi_id->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
+ lu->login_orb->login_response_lo = lu->login_response_dma;
+ lu->login_orb->login_response_hi = ORB_SET_NODE_ID(hi->host->node_id);
+ lu->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST);
- scsi_id->login_orb->lun_misc = ORB_SET_FUNCTION(SBP2_LOGIN_REQUEST);
- scsi_id->login_orb->lun_misc |= ORB_SET_RECONNECT(0); /* One second reconnect time */
- scsi_id->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(exclusive_login); /* Exclusive access to device */
- scsi_id->login_orb->lun_misc |= ORB_SET_NOTIFY(1); /* Notify us of login complete */
- scsi_id->login_orb->lun_misc |= ORB_SET_LUN(scsi_id->sbp2_lun);
+ /* one second reconnect time */
+ lu->login_orb->lun_misc |= ORB_SET_RECONNECT(0);
+ lu->login_orb->lun_misc |= ORB_SET_EXCLUSIVE(sbp2_exclusive_login);
+ lu->login_orb->lun_misc |= ORB_SET_NOTIFY(1);
+ lu->login_orb->lun_misc |= ORB_SET_LUN(lu->lun);
- scsi_id->login_orb->passwd_resp_lengths =
+ lu->login_orb->passwd_resp_lengths =
ORB_SET_LOGIN_RESP_LENGTH(sizeof(struct sbp2_login_response));
- scsi_id->login_orb->status_fifo_hi =
- ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
- scsi_id->login_orb->status_fifo_lo =
- ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
+ lu->login_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id);
+ lu->login_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr);
- sbp2util_cpu_to_be32_buffer(scsi_id->login_orb, sizeof(struct sbp2_login_orb));
+ sbp2util_cpu_to_be32_buffer(lu->login_orb,
+ sizeof(struct sbp2_login_orb));
- sbp2util_packet_dump(scsi_id->login_orb, sizeof(struct sbp2_login_orb),
- "sbp2 login orb", scsi_id->login_orb_dma);
-
- memset(scsi_id->login_response, 0, sizeof(struct sbp2_login_response));
+ memset(lu->login_response, 0, sizeof(struct sbp2_login_response));
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
- data[1] = scsi_id->login_orb_dma;
+ data[1] = lu->login_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- hpsb_node_write(scsi_id->ne, scsi_id->sbp2_management_agent_addr, data, 8);
+ hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8);
- /*
- * Wait for login status (up to 20 seconds)...
- */
- if (sbp2util_access_timeout(scsi_id, 20*HZ)) {
+ /* wait up to 20 seconds for login status */
+ if (sbp2util_access_timeout(lu, 20*HZ)) {
SBP2_ERR("Error logging into SBP-2 device - timed out");
return -EIO;
}
- /*
- * Sanity. Make sure status returned matches login orb.
- */
- if (scsi_id->status_block.ORB_offset_lo != scsi_id->login_orb_dma) {
+ /* make sure that the returned status matches the login ORB */
+ if (lu->status_block.ORB_offset_lo != lu->login_orb_dma) {
SBP2_ERR("Error logging into SBP-2 device - timed out");
return -EIO;
}
- if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) {
SBP2_ERR("Error logging into SBP-2 device - failed");
return -EIO;
}
- /*
- * Byte swap the login response, for use when reconnecting or
- * logging out.
- */
- sbp2util_cpu_to_be32_buffer(scsi_id->login_response, sizeof(struct sbp2_login_response));
-
- /*
- * Grab our command block agent address from the login response.
- */
- SBP2_DEBUG("command_block_agent_hi = %x",
- (unsigned int)scsi_id->login_response->command_block_agent_hi);
- SBP2_DEBUG("command_block_agent_lo = %x",
- (unsigned int)scsi_id->login_response->command_block_agent_lo);
-
- scsi_id->sbp2_command_block_agent_addr =
- ((u64)scsi_id->login_response->command_block_agent_hi) << 32;
- scsi_id->sbp2_command_block_agent_addr |= ((u64)scsi_id->login_response->command_block_agent_lo);
- scsi_id->sbp2_command_block_agent_addr &= 0x0000ffffffffffffULL;
+ sbp2util_cpu_to_be32_buffer(lu->login_response,
+ sizeof(struct sbp2_login_response));
+ lu->command_block_agent_addr =
+ ((u64)lu->login_response->command_block_agent_hi) << 32;
+ lu->command_block_agent_addr |=
+ ((u64)lu->login_response->command_block_agent_lo);
+ lu->command_block_agent_addr &= 0x0000ffffffffffffULL;
SBP2_INFO("Logged into SBP-2 device");
return 0;
}
-/*
- * This function is called in order to logout from a particular SBP-2
- * device, usually called during driver unload.
- */
-static int sbp2_logout_device(struct scsi_id_instance_data *scsi_id)
+static int sbp2_logout_device(struct sbp2_lu *lu)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
quadlet_t data[2];
int error;
- SBP2_DEBUG_ENTER();
-
- /*
- * Set-up logout ORB
- */
- scsi_id->logout_orb->reserved1 = 0x0;
- scsi_id->logout_orb->reserved2 = 0x0;
- scsi_id->logout_orb->reserved3 = 0x0;
- scsi_id->logout_orb->reserved4 = 0x0;
-
- scsi_id->logout_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_LOGOUT_REQUEST);
- scsi_id->logout_orb->login_ID_misc |= ORB_SET_LOGIN_ID(scsi_id->login_response->length_login_ID);
-
- /* Notify us when complete */
- scsi_id->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
+ lu->logout_orb->reserved1 = 0x0;
+ lu->logout_orb->reserved2 = 0x0;
+ lu->logout_orb->reserved3 = 0x0;
+ lu->logout_orb->reserved4 = 0x0;
- scsi_id->logout_orb->reserved5 = 0x0;
- scsi_id->logout_orb->status_fifo_hi =
- ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
- scsi_id->logout_orb->status_fifo_lo =
- ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
+ lu->logout_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_LOGOUT_REQUEST);
+ lu->logout_orb->login_ID_misc |=
+ ORB_SET_LOGIN_ID(lu->login_response->length_login_ID);
+ lu->logout_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
- /*
- * Byte swap ORB if necessary
- */
- sbp2util_cpu_to_be32_buffer(scsi_id->logout_orb, sizeof(struct sbp2_logout_orb));
+ lu->logout_orb->reserved5 = 0x0;
+ lu->logout_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id);
+ lu->logout_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr);
- sbp2util_packet_dump(scsi_id->logout_orb, sizeof(struct sbp2_logout_orb),
- "sbp2 logout orb", scsi_id->logout_orb_dma);
+ sbp2util_cpu_to_be32_buffer(lu->logout_orb,
+ sizeof(struct sbp2_logout_orb));
- /*
- * Ok, let's write to the target's management agent register
- */
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
- data[1] = scsi_id->logout_orb_dma;
+ data[1] = lu->logout_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- error = hpsb_node_write(scsi_id->ne,
- scsi_id->sbp2_management_agent_addr, data, 8);
+ error = hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8);
if (error)
return error;
- /* Wait for device to logout...1 second. */
- if (sbp2util_access_timeout(scsi_id, HZ))
+ /* wait up to 1 second for the device to complete logout */
+ if (sbp2util_access_timeout(lu, HZ))
return -EIO;
SBP2_INFO("Logged out of SBP-2 device");
return 0;
}
-/*
- * This function is called in order to reconnect to a particular SBP-2
- * device, after a bus reset.
- */
-static int sbp2_reconnect_device(struct scsi_id_instance_data *scsi_id)
+static int sbp2_reconnect_device(struct sbp2_lu *lu)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
quadlet_t data[2];
int error;
- SBP2_DEBUG_ENTER();
+ lu->reconnect_orb->reserved1 = 0x0;
+ lu->reconnect_orb->reserved2 = 0x0;
+ lu->reconnect_orb->reserved3 = 0x0;
+ lu->reconnect_orb->reserved4 = 0x0;
- /*
- * Set-up reconnect ORB
- */
- scsi_id->reconnect_orb->reserved1 = 0x0;
- scsi_id->reconnect_orb->reserved2 = 0x0;
- scsi_id->reconnect_orb->reserved3 = 0x0;
- scsi_id->reconnect_orb->reserved4 = 0x0;
-
- scsi_id->reconnect_orb->login_ID_misc = ORB_SET_FUNCTION(SBP2_RECONNECT_REQUEST);
- scsi_id->reconnect_orb->login_ID_misc |=
- ORB_SET_LOGIN_ID(scsi_id->login_response->length_login_ID);
+ lu->reconnect_orb->login_ID_misc =
+ ORB_SET_FUNCTION(SBP2_RECONNECT_REQUEST);
+ lu->reconnect_orb->login_ID_misc |=
+ ORB_SET_LOGIN_ID(lu->login_response->length_login_ID);
+ lu->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
- /* Notify us when complete */
- scsi_id->reconnect_orb->login_ID_misc |= ORB_SET_NOTIFY(1);
+ lu->reconnect_orb->reserved5 = 0x0;
+ lu->reconnect_orb->status_fifo_hi =
+ ORB_SET_STATUS_FIFO_HI(lu->status_fifo_addr, hi->host->node_id);
+ lu->reconnect_orb->status_fifo_lo =
+ ORB_SET_STATUS_FIFO_LO(lu->status_fifo_addr);
- scsi_id->reconnect_orb->reserved5 = 0x0;
- scsi_id->reconnect_orb->status_fifo_hi =
- ORB_SET_STATUS_FIFO_HI(scsi_id->status_fifo_addr, hi->host->node_id);
- scsi_id->reconnect_orb->status_fifo_lo =
- ORB_SET_STATUS_FIFO_LO(scsi_id->status_fifo_addr);
-
- /*
- * Byte swap ORB if necessary
- */
- sbp2util_cpu_to_be32_buffer(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb));
-
- sbp2util_packet_dump(scsi_id->reconnect_orb, sizeof(struct sbp2_reconnect_orb),
- "sbp2 reconnect orb", scsi_id->reconnect_orb_dma);
+ sbp2util_cpu_to_be32_buffer(lu->reconnect_orb,
+ sizeof(struct sbp2_reconnect_orb));
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
- data[1] = scsi_id->reconnect_orb_dma;
+ data[1] = lu->reconnect_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
- error = hpsb_node_write(scsi_id->ne,
- scsi_id->sbp2_management_agent_addr, data, 8);
+ error = hpsb_node_write(lu->ne, lu->management_agent_addr, data, 8);
if (error)
return error;
- /*
- * Wait for reconnect status (up to 1 second)...
- */
- if (sbp2util_access_timeout(scsi_id, HZ)) {
+ /* wait up to 1 second for reconnect status */
+ if (sbp2util_access_timeout(lu, HZ)) {
SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
return -EIO;
}
- /*
- * Sanity. Make sure status returned matches reconnect orb.
- */
- if (scsi_id->status_block.ORB_offset_lo != scsi_id->reconnect_orb_dma) {
+ /* make sure that the returned status matches the reconnect ORB */
+ if (lu->status_block.ORB_offset_lo != lu->reconnect_orb_dma) {
SBP2_ERR("Error reconnecting to SBP-2 device - timed out");
return -EIO;
}
- if (STATUS_TEST_RDS(scsi_id->status_block.ORB_offset_hi_misc)) {
+ if (STATUS_TEST_RDS(lu->status_block.ORB_offset_hi_misc)) {
SBP2_ERR("Error reconnecting to SBP-2 device - failed");
return -EIO;
}
- HPSB_DEBUG("Reconnected to SBP-2 device");
+ SBP2_INFO("Reconnected to SBP-2 device");
return 0;
}
/*
- * This function is called in order to set the busy timeout (number of
- * retries to attempt) on the sbp2 device.
+ * Set the target node's Single Phase Retry limit. Affects the target's retry
+ * behaviour if our node is too busy to accept requests.
*/
-static int sbp2_set_busy_timeout(struct scsi_id_instance_data *scsi_id)
+static int sbp2_set_busy_timeout(struct sbp2_lu *lu)
{
quadlet_t data;
- SBP2_DEBUG_ENTER();
-
data = cpu_to_be32(SBP2_BUSY_TIMEOUT_VALUE);
- if (hpsb_node_write(scsi_id->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4))
+ if (hpsb_node_write(lu->ne, SBP2_BUSY_TIMEOUT_ADDRESS, &data, 4))
SBP2_ERR("%s error", __FUNCTION__);
return 0;
}
-/*
- * This function is called to parse sbp2 device's config rom unit
- * directory. Used to determine things like sbp2 management agent offset,
- * and command set used (SCSI or RBC).
- */
-static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
+static void sbp2_parse_unit_directory(struct sbp2_lu *lu,
struct unit_directory *ud)
{
struct csr1212_keyval *kv;
struct csr1212_dentry *dentry;
u64 management_agent_addr;
- u32 command_set_spec_id, command_set, unit_characteristics,
- firmware_revision;
+ u32 unit_characteristics, firmware_revision;
unsigned workarounds;
int i;
- SBP2_DEBUG_ENTER();
+ management_agent_addr = 0;
+ unit_characteristics = 0;
+ firmware_revision = 0;
- management_agent_addr = 0x0;
- command_set_spec_id = 0x0;
- command_set = 0x0;
- unit_characteristics = 0x0;
- firmware_revision = 0x0;
-
- /* Handle different fields in the unit directory, based on keys */
csr1212_for_each_dir_entry(ud->ne->csr, kv, ud->ud_kv, dentry) {
switch (kv->key.id) {
case CSR1212_KV_ID_DEPENDENT_INFO:
- if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET) {
- /* Save off the management agent address */
+ if (kv->key.type == CSR1212_KV_TYPE_CSR_OFFSET)
management_agent_addr =
CSR1212_REGISTER_SPACE_BASE +
(kv->value.csr_offset << 2);
- SBP2_DEBUG("sbp2_management_agent_addr = %x",
- (unsigned int)management_agent_addr);
- } else if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE) {
- scsi_id->sbp2_lun =
- ORB_SET_LUN(kv->value.immediate);
- }
- break;
-
- case SBP2_COMMAND_SET_SPEC_ID_KEY:
- /* Command spec organization */
- command_set_spec_id = kv->value.immediate;
- SBP2_DEBUG("sbp2_command_set_spec_id = %x",
- (unsigned int)command_set_spec_id);
- break;
-
- case SBP2_COMMAND_SET_KEY:
- /* Command set used by sbp2 device */
- command_set = kv->value.immediate;
- SBP2_DEBUG("sbp2_command_set = %x",
- (unsigned int)command_set);
+ else if (kv->key.type == CSR1212_KV_TYPE_IMMEDIATE)
+ lu->lun = ORB_SET_LUN(kv->value.immediate);
break;
case SBP2_UNIT_CHARACTERISTICS_KEY:
- /*
- * Unit characterisitcs (orb related stuff
- * that I'm not yet paying attention to)
- */
+ /* FIXME: This is ignored so far.
+ * See SBP-2 clause 7.4.8. */
unit_characteristics = kv->value.immediate;
- SBP2_DEBUG("sbp2_unit_characteristics = %x",
- (unsigned int)unit_characteristics);
break;
case SBP2_FIRMWARE_REVISION_KEY:
- /* Firmware revision */
firmware_revision = kv->value.immediate;
- SBP2_DEBUG("sbp2_firmware_revision = %x",
- (unsigned int)firmware_revision);
break;
default:
+ /* FIXME: Check for SBP2_DEVICE_TYPE_AND_LUN_KEY.
+ * Its "ordered" bit has consequences for command ORB
+ * list handling. See SBP-2 clauses 4.6, 7.4.11, 10.2 */
break;
}
}
@@ -1626,28 +1329,24 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
/* We would need one SCSI host template for each target to adjust
* max_sectors on the fly, therefore warn only. */
if (workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
- (max_sectors * 512) > (128 * 1024))
- SBP2_WARN("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
+ (sbp2_max_sectors * 512) > (128 * 1024))
+ SBP2_INFO("Node " NODE_BUS_FMT ": Bridge only supports 128KB "
"max transfer size. WARNING: Current max_sectors "
"setting is larger than 128KB (%d sectors)",
NODE_BUS_ARGS(ud->ne->host, ud->ne->nodeid),
- max_sectors);
+ sbp2_max_sectors);
/* If this is a logical unit directory entry, process the parent
* to get the values. */
if (ud->flags & UNIT_DIRECTORY_LUN_DIRECTORY) {
- struct unit_directory *parent_ud =
- container_of(ud->device.parent, struct unit_directory, device);
- sbp2_parse_unit_directory(scsi_id, parent_ud);
+ struct unit_directory *parent_ud = container_of(
+ ud->device.parent, struct unit_directory, device);
+ sbp2_parse_unit_directory(lu, parent_ud);
} else {
- scsi_id->sbp2_management_agent_addr = management_agent_addr;
- scsi_id->sbp2_command_set_spec_id = command_set_spec_id;
- scsi_id->sbp2_command_set = command_set;
- scsi_id->sbp2_unit_characteristics = unit_characteristics;
- scsi_id->sbp2_firmware_revision = firmware_revision;
- scsi_id->workarounds = workarounds;
+ lu->management_agent_addr = management_agent_addr;
+ lu->workarounds = workarounds;
if (ud->flags & UNIT_DIRECTORY_HAS_LUN)
- scsi_id->sbp2_lun = ORB_SET_LUN(ud->lun);
+ lu->lun = ORB_SET_LUN(ud->lun);
}
}
@@ -1662,133 +1361,114 @@ static void sbp2_parse_unit_directory(struct scsi_id_instance_data *scsi_id,
* the speed that it needs to use, and the max_rec the host supports, and
* it takes care of the rest.
*/
-static int sbp2_max_speed_and_size(struct scsi_id_instance_data *scsi_id)
+static int sbp2_max_speed_and_size(struct sbp2_lu *lu)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
u8 payload;
- SBP2_DEBUG_ENTER();
-
- scsi_id->speed_code =
- hi->host->speed[NODEID_TO_NODE(scsi_id->ne->nodeid)];
+ lu->speed_code = hi->host->speed[NODEID_TO_NODE(lu->ne->nodeid)];
- /* Bump down our speed if the user requested it */
- if (scsi_id->speed_code > max_speed) {
- scsi_id->speed_code = max_speed;
- SBP2_ERR("Forcing SBP-2 max speed down to %s",
- hpsb_speedto_str[scsi_id->speed_code]);
+ if (lu->speed_code > sbp2_max_speed) {
+ lu->speed_code = sbp2_max_speed;
+ SBP2_INFO("Reducing speed to %s",
+ hpsb_speedto_str[sbp2_max_speed]);
}
/* Payload size is the lesser of what our speed supports and what
* our host supports. */
- payload = min(sbp2_speedto_max_payload[scsi_id->speed_code],
+ payload = min(sbp2_speedto_max_payload[lu->speed_code],
(u8) (hi->host->csr.max_rec - 1));
/* If physical DMA is off, work around limitation in ohci1394:
* packet size must not exceed PAGE_SIZE */
- if (scsi_id->ne->host->low_addr_space < (1ULL << 32))
+ if (lu->ne->host->low_addr_space < (1ULL << 32))
while (SBP2_PAYLOAD_TO_BYTES(payload) + 24 > PAGE_SIZE &&
payload)
payload--;
- HPSB_DEBUG("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]",
- NODE_BUS_ARGS(hi->host, scsi_id->ne->nodeid),
- hpsb_speedto_str[scsi_id->speed_code],
- SBP2_PAYLOAD_TO_BYTES(payload));
+ SBP2_INFO("Node " NODE_BUS_FMT ": Max speed [%s] - Max payload [%u]",
+ NODE_BUS_ARGS(hi->host, lu->ne->nodeid),
+ hpsb_speedto_str[lu->speed_code],
+ SBP2_PAYLOAD_TO_BYTES(payload));
- scsi_id->max_payload_size = payload;
+ lu->max_payload_size = payload;
return 0;
}
-/*
- * This function is called in order to perform a SBP-2 agent reset.
- */
-static int sbp2_agent_reset(struct scsi_id_instance_data *scsi_id, int wait)
+static int sbp2_agent_reset(struct sbp2_lu *lu, int wait)
{
quadlet_t data;
u64 addr;
int retval;
unsigned long flags;
- SBP2_DEBUG_ENTER();
-
- cancel_delayed_work(&scsi_id->protocol_work);
+ /* flush lu->protocol_work */
if (wait)
flush_scheduled_work();
data = ntohl(SBP2_AGENT_RESET_DATA);
- addr = scsi_id->sbp2_command_block_agent_addr + SBP2_AGENT_RESET_OFFSET;
+ addr = lu->command_block_agent_addr + SBP2_AGENT_RESET_OFFSET;
if (wait)
- retval = hpsb_node_write(scsi_id->ne, addr, &data, 4);
+ retval = hpsb_node_write(lu->ne, addr, &data, 4);
else
- retval = sbp2util_node_write_no_wait(scsi_id->ne, addr, &data, 4);
+ retval = sbp2util_node_write_no_wait(lu->ne, addr, &data, 4);
if (retval < 0) {
SBP2_ERR("hpsb_node_write failed.\n");
return -EIO;
}
- /*
- * Need to make sure orb pointer is written on next command
- */
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- scsi_id->last_orb = NULL;
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ /* make sure that the ORB_POINTER is written on next command */
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ lu->last_orb = NULL;
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
return 0;
}
static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb,
- struct sbp2scsi_host_info *hi,
- struct sbp2_command_info *command,
+ struct sbp2_fwhost_info *hi,
+ struct sbp2_command_info *cmd,
unsigned int scsi_use_sg,
struct scatterlist *sgpnt,
u32 orb_direction,
enum dma_data_direction dma_dir)
{
- command->dma_dir = dma_dir;
+ cmd->dma_dir = dma_dir;
orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
orb->misc |= ORB_SET_DIRECTION(orb_direction);
- /* Special case if only one element (and less than 64KB in size) */
+ /* special case if only one element (and less than 64KB in size) */
if ((scsi_use_sg == 1) &&
(sgpnt[0].length <= SBP2_MAX_SG_ELEMENT_LENGTH)) {
- SBP2_DEBUG("Only one s/g element");
- command->dma_size = sgpnt[0].length;
- command->dma_type = CMD_DMA_PAGE;
- command->cmd_dma = pci_map_page(hi->host->pdev,
- sgpnt[0].page,
- sgpnt[0].offset,
- command->dma_size,
- command->dma_dir);
- SBP2_DMA_ALLOC("single page scatter element");
+ cmd->dma_size = sgpnt[0].length;
+ cmd->dma_type = CMD_DMA_PAGE;
+ cmd->cmd_dma = dma_map_page(&hi->host->device,
+ sgpnt[0].page, sgpnt[0].offset,
+ cmd->dma_size, cmd->dma_dir);
- orb->data_descriptor_lo = command->cmd_dma;
- orb->misc |= ORB_SET_DATA_SIZE(command->dma_size);
+ orb->data_descriptor_lo = cmd->cmd_dma;
+ orb->misc |= ORB_SET_DATA_SIZE(cmd->dma_size);
} else {
struct sbp2_unrestricted_page_table *sg_element =
- &command->scatter_gather_element[0];
+ &cmd->scatter_gather_element[0];
u32 sg_count, sg_len;
dma_addr_t sg_addr;
- int i, count = pci_map_sg(hi->host->pdev, sgpnt, scsi_use_sg,
+ int i, count = dma_map_sg(&hi->host->device, sgpnt, scsi_use_sg,
dma_dir);
- SBP2_DMA_ALLOC("scatter list");
-
- command->dma_size = scsi_use_sg;
- command->sge_buffer = sgpnt;
+ cmd->dma_size = scsi_use_sg;
+ cmd->sge_buffer = sgpnt;
/* use page tables (s/g) */
orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1);
- orb->data_descriptor_lo = command->sge_dma;
+ orb->data_descriptor_lo = cmd->sge_dma;
- /*
- * Loop through and fill out our sbp-2 page tables
- * (and split up anything too large)
- */
+ /* loop through and fill out our SBP-2 page tables
+ * (and split up anything too large) */
for (i = 0, sg_count = 0 ; i < count; i++, sgpnt++) {
sg_len = sg_dma_len(sgpnt);
sg_addr = sg_dma_address(sgpnt);
@@ -1808,70 +1488,53 @@ static void sbp2_prep_command_orb_sg(struct sbp2_command_orb *orb,
}
}
- /* Number of page table (s/g) elements */
orb->misc |= ORB_SET_DATA_SIZE(sg_count);
- sbp2util_packet_dump(sg_element,
- (sizeof(struct sbp2_unrestricted_page_table)) * sg_count,
- "sbp2 s/g list", command->sge_dma);
-
- /* Byte swap page tables if necessary */
sbp2util_cpu_to_be32_buffer(sg_element,
- (sizeof(struct sbp2_unrestricted_page_table)) *
- sg_count);
+ (sizeof(struct sbp2_unrestricted_page_table)) *
+ sg_count);
}
}
static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb,
- struct sbp2scsi_host_info *hi,
- struct sbp2_command_info *command,
+ struct sbp2_fwhost_info *hi,
+ struct sbp2_command_info *cmd,
struct scatterlist *sgpnt,
u32 orb_direction,
unsigned int scsi_request_bufflen,
void *scsi_request_buffer,
enum dma_data_direction dma_dir)
{
- command->dma_dir = dma_dir;
- command->dma_size = scsi_request_bufflen;
- command->dma_type = CMD_DMA_SINGLE;
- command->cmd_dma = pci_map_single(hi->host->pdev, scsi_request_buffer,
- command->dma_size, command->dma_dir);
+ cmd->dma_dir = dma_dir;
+ cmd->dma_size = scsi_request_bufflen;
+ cmd->dma_type = CMD_DMA_SINGLE;
+ cmd->cmd_dma = dma_map_single(&hi->host->device, scsi_request_buffer,
+ cmd->dma_size, cmd->dma_dir);
orb->data_descriptor_hi = ORB_SET_NODE_ID(hi->host->node_id);
orb->misc |= ORB_SET_DIRECTION(orb_direction);
- SBP2_DMA_ALLOC("single bulk");
-
- /*
- * Handle case where we get a command w/o s/g enabled (but
- * check for transfers larger than 64K)
- */
+ /* handle case where we get a command w/o s/g enabled
+ * (but check for transfers larger than 64K) */
if (scsi_request_bufflen <= SBP2_MAX_SG_ELEMENT_LENGTH) {
- orb->data_descriptor_lo = command->cmd_dma;
+ orb->data_descriptor_lo = cmd->cmd_dma;
orb->misc |= ORB_SET_DATA_SIZE(scsi_request_bufflen);
} else {
+ /* The buffer is too large. Turn this into page tables. */
+
struct sbp2_unrestricted_page_table *sg_element =
- &command->scatter_gather_element[0];
+ &cmd->scatter_gather_element[0];
u32 sg_count, sg_len;
dma_addr_t sg_addr;
- /*
- * Need to turn this into page tables, since the
- * buffer is too large.
- */
- orb->data_descriptor_lo = command->sge_dma;
-
- /* Use page tables (s/g) */
+ orb->data_descriptor_lo = cmd->sge_dma;
orb->misc |= ORB_SET_PAGE_TABLE_PRESENT(0x1);
- /*
- * fill out our sbp-2 page tables (and split up
- * the large buffer)
- */
+ /* fill out our SBP-2 page tables; split up the large buffer */
sg_count = 0;
sg_len = scsi_request_bufflen;
- sg_addr = command->cmd_dma;
+ sg_addr = cmd->cmd_dma;
while (sg_len) {
sg_element[sg_count].segment_base_lo = sg_addr;
if (sg_len > SBP2_MAX_SG_ELEMENT_LENGTH) {
@@ -1887,50 +1550,40 @@ static void sbp2_prep_command_orb_no_sg(struct sbp2_command_orb *orb,
sg_count++;
}
- /* Number of page table (s/g) elements */
orb->misc |= ORB_SET_DATA_SIZE(sg_count);
- sbp2util_packet_dump(sg_element,
- (sizeof(struct sbp2_unrestricted_page_table)) * sg_count,
- "sbp2 s/g list", command->sge_dma);
-
- /* Byte swap page tables if necessary */
sbp2util_cpu_to_be32_buffer(sg_element,
- (sizeof(struct sbp2_unrestricted_page_table)) *
- sg_count);
+ (sizeof(struct sbp2_unrestricted_page_table)) *
+ sg_count);
}
}
-/*
- * This function is called to create the actual command orb and s/g list
- * out of the scsi command itself.
- */
-static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
- struct sbp2_command_info *command,
+static void sbp2_create_command_orb(struct sbp2_lu *lu,
+ struct sbp2_command_info *cmd,
unchar *scsi_cmd,
unsigned int scsi_use_sg,
unsigned int scsi_request_bufflen,
void *scsi_request_buffer,
enum dma_data_direction dma_dir)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
struct scatterlist *sgpnt = (struct scatterlist *)scsi_request_buffer;
- struct sbp2_command_orb *command_orb = &command->command_orb;
+ struct sbp2_command_orb *orb = &cmd->command_orb;
u32 orb_direction;
/*
- * Set-up our command ORB..
+ * Set-up our command ORB.
*
* NOTE: We're doing unrestricted page tables (s/g), as this is
* best performance (at least with the devices I have). This means
* that data_size becomes the number of s/g elements, and
* page_size should be zero (for unrestricted).
*/
- command_orb->next_ORB_hi = ORB_SET_NULL_PTR(1);
- command_orb->next_ORB_lo = 0x0;
- command_orb->misc = ORB_SET_MAX_PAYLOAD(scsi_id->max_payload_size);
- command_orb->misc |= ORB_SET_SPEED(scsi_id->speed_code);
- command_orb->misc |= ORB_SET_NOTIFY(1); /* Notify us when complete */
+ orb->next_ORB_hi = ORB_SET_NULL_PTR(1);
+ orb->next_ORB_lo = 0x0;
+ orb->misc = ORB_SET_MAX_PAYLOAD(lu->max_payload_size);
+ orb->misc |= ORB_SET_SPEED(lu->speed_code);
+ orb->misc |= ORB_SET_NOTIFY(1);
if (dma_dir == DMA_NONE)
orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
@@ -1939,66 +1592,51 @@ static void sbp2_create_command_orb(struct scsi_id_instance_data *scsi_id,
else if (dma_dir == DMA_FROM_DEVICE && scsi_request_bufflen)
orb_direction = ORB_DIRECTION_READ_FROM_MEDIA;
else {
- SBP2_WARN("Falling back to DMA_NONE");
+ SBP2_INFO("Falling back to DMA_NONE");
orb_direction = ORB_DIRECTION_NO_DATA_TRANSFER;
}
- /* Set-up our pagetable stuff */
+ /* set up our page table stuff */
if (orb_direction == ORB_DIRECTION_NO_DATA_TRANSFER) {
- SBP2_DEBUG("No data transfer");
- command_orb->data_descriptor_hi = 0x0;
- command_orb->data_descriptor_lo = 0x0;
- command_orb->misc |= ORB_SET_DIRECTION(1);
- } else if (scsi_use_sg) {
- SBP2_DEBUG("Use scatter/gather");
- sbp2_prep_command_orb_sg(command_orb, hi, command, scsi_use_sg,
- sgpnt, orb_direction, dma_dir);
- } else {
- SBP2_DEBUG("No scatter/gather");
- sbp2_prep_command_orb_no_sg(command_orb, hi, command, sgpnt,
- orb_direction, scsi_request_bufflen,
+ orb->data_descriptor_hi = 0x0;
+ orb->data_descriptor_lo = 0x0;
+ orb->misc |= ORB_SET_DIRECTION(1);
+ } else if (scsi_use_sg)
+ sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_use_sg, sgpnt,
+ orb_direction, dma_dir);
+ else
+ sbp2_prep_command_orb_no_sg(orb, hi, cmd, sgpnt, orb_direction,
+ scsi_request_bufflen,
scsi_request_buffer, dma_dir);
- }
- /* Byte swap command ORB if necessary */
- sbp2util_cpu_to_be32_buffer(command_orb, sizeof(struct sbp2_command_orb));
+ sbp2util_cpu_to_be32_buffer(orb, sizeof(*orb));
- /* Put our scsi command in the command ORB */
- memset(command_orb->cdb, 0, 12);
- memcpy(command_orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd));
+ memset(orb->cdb, 0, 12);
+ memcpy(orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd));
}
-/*
- * This function is called in order to begin a regular SBP-2 command.
- */
-static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
- struct sbp2_command_info *command)
+static void sbp2_link_orb_command(struct sbp2_lu *lu,
+ struct sbp2_command_info *cmd)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
- struct sbp2_command_orb *command_orb = &command->command_orb;
+ struct sbp2_fwhost_info *hi = lu->hi;
struct sbp2_command_orb *last_orb;
dma_addr_t last_orb_dma;
- u64 addr = scsi_id->sbp2_command_block_agent_addr;
+ u64 addr = lu->command_block_agent_addr;
quadlet_t data[2];
size_t length;
unsigned long flags;
- outstanding_orb_incr;
- SBP2_ORB_DEBUG("sending command orb %p, total orbs = %x",
- command_orb, global_outstanding_command_orbs);
-
- pci_dma_sync_single_for_device(hi->host->pdev, command->command_orb_dma,
- sizeof(struct sbp2_command_orb),
- PCI_DMA_TODEVICE);
- pci_dma_sync_single_for_device(hi->host->pdev, command->sge_dma,
- sizeof(command->scatter_gather_element),
- PCI_DMA_BIDIRECTIONAL);
- /*
- * Check to see if there are any previous orbs to use
- */
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- last_orb = scsi_id->last_orb;
- last_orb_dma = scsi_id->last_orb_dma;
+ dma_sync_single_for_device(&hi->host->device, cmd->command_orb_dma,
+ sizeof(struct sbp2_command_orb),
+ DMA_TO_DEVICE);
+ dma_sync_single_for_device(&hi->host->device, cmd->sge_dma,
+ sizeof(cmd->scatter_gather_element),
+ DMA_BIDIRECTIONAL);
+
+ /* check to see if there are any previous orbs to use */
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ last_orb = lu->last_orb;
+ last_orb_dma = lu->last_orb_dma;
if (!last_orb) {
/*
* last_orb == NULL means: We know that the target's fetch agent
@@ -2006,7 +1644,7 @@ static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
*/
addr += SBP2_ORB_POINTER_OFFSET;
data[0] = ORB_SET_NODE_ID(hi->host->node_id);
- data[1] = command->command_orb_dma;
+ data[1] = cmd->command_orb_dma;
sbp2util_cpu_to_be32_buffer(data, 8);
length = 8;
} else {
@@ -2017,27 +1655,25 @@ static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
* The target's fetch agent may or may not have read this
* previous ORB yet.
*/
- pci_dma_sync_single_for_cpu(hi->host->pdev, last_orb_dma,
- sizeof(struct sbp2_command_orb),
- PCI_DMA_TODEVICE);
- last_orb->next_ORB_lo = cpu_to_be32(command->command_orb_dma);
+ dma_sync_single_for_cpu(&hi->host->device, last_orb_dma,
+ sizeof(struct sbp2_command_orb),
+ DMA_TO_DEVICE);
+ last_orb->next_ORB_lo = cpu_to_be32(cmd->command_orb_dma);
wmb();
/* Tells hardware that this pointer is valid */
last_orb->next_ORB_hi = 0;
- pci_dma_sync_single_for_device(hi->host->pdev, last_orb_dma,
- sizeof(struct sbp2_command_orb),
- PCI_DMA_TODEVICE);
+ dma_sync_single_for_device(&hi->host->device, last_orb_dma,
+ sizeof(struct sbp2_command_orb),
+ DMA_TO_DEVICE);
addr += SBP2_DOORBELL_OFFSET;
data[0] = 0;
length = 4;
}
- scsi_id->last_orb = command_orb;
- scsi_id->last_orb_dma = command->command_orb_dma;
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ lu->last_orb = &cmd->command_orb;
+ lu->last_orb_dma = cmd->command_orb_dma;
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
- SBP2_ORB_DEBUG("write to %s register, command orb %p",
- last_orb ? "DOORBELL" : "ORB_POINTER", command_orb);
- if (sbp2util_node_write_no_wait(scsi_id->ne, addr, data, length)) {
+ if (sbp2util_node_write_no_wait(lu->ne, addr, data, length)) {
/*
* sbp2util_node_write_no_wait failed. We certainly ran out
* of transaction labels, perhaps just because there were no
@@ -2046,52 +1682,29 @@ static void sbp2_link_orb_command(struct scsi_id_instance_data *scsi_id,
* the workqueue job will sleep to guaranteedly get a tlabel.
* We do not accept new commands until the job is over.
*/
- scsi_block_requests(scsi_id->scsi_host);
- PREPARE_WORK(&scsi_id->protocol_work,
+ scsi_block_requests(lu->shost);
+ PREPARE_WORK(&lu->protocol_work,
last_orb ? sbp2util_write_doorbell:
- sbp2util_write_orb_pointer,
- scsi_id);
- schedule_work(&scsi_id->protocol_work);
+ sbp2util_write_orb_pointer);
+ schedule_work(&lu->protocol_work);
}
}
-/*
- * This function is called in order to begin a regular SBP-2 command.
- */
-static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
- struct scsi_cmnd *SCpnt,
+static int sbp2_send_command(struct sbp2_lu *lu, struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- unchar *cmd = (unchar *) SCpnt->cmnd;
+ unchar *scsi_cmd = (unchar *)SCpnt->cmnd;
unsigned int request_bufflen = SCpnt->request_bufflen;
- struct sbp2_command_info *command;
+ struct sbp2_command_info *cmd;
- SBP2_DEBUG_ENTER();
- SBP2_DEBUG("SCSI transfer size = %x", request_bufflen);
- SBP2_DEBUG("SCSI s/g elements = %x", (unsigned int)SCpnt->use_sg);
-
- /*
- * Allocate a command orb and s/g structure
- */
- command = sbp2util_allocate_command_orb(scsi_id, SCpnt, done);
- if (!command) {
+ cmd = sbp2util_allocate_command_orb(lu, SCpnt, done);
+ if (!cmd)
return -EIO;
- }
- /*
- * Now actually fill in the comamnd orb and sbp2 s/g list
- */
- sbp2_create_command_orb(scsi_id, command, cmd, SCpnt->use_sg,
+ sbp2_create_command_orb(lu, cmd, scsi_cmd, SCpnt->use_sg,
request_bufflen, SCpnt->request_buffer,
SCpnt->sc_data_direction);
-
- sbp2util_packet_dump(&command->command_orb, sizeof(struct sbp2_command_orb),
- "sbp2 command orb", command->command_orb_dma);
-
- /*
- * Link up the orb, and ring the doorbell if needed
- */
- sbp2_link_orb_command(scsi_id, command);
+ sbp2_link_orb_command(lu, cmd);
return 0;
}
@@ -2099,13 +1712,10 @@ static int sbp2_send_command(struct scsi_id_instance_data *scsi_id,
/*
* Translates SBP-2 status into SCSI sense data for check conditions
*/
-static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense_data)
+static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status,
+ unchar *sense_data)
{
- SBP2_DEBUG_ENTER();
-
- /*
- * Ok, it's pretty ugly... ;-)
- */
+ /* OK, it's pretty ugly... ;-) */
sense_data[0] = 0x70;
sense_data[1] = 0x0;
sense_data[2] = sbp2_status[9];
@@ -2123,28 +1733,21 @@ static unsigned int sbp2_status_to_sense_data(unchar *sbp2_status, unchar *sense
sense_data[14] = sbp2_status[20];
sense_data[15] = sbp2_status[21];
- return sbp2_status[8] & 0x3f; /* return scsi status */
+ return sbp2_status[8] & 0x3f;
}
-/*
- * This function deals with status writes from the SBP-2 device
- */
static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
int destid, quadlet_t *data, u64 addr,
size_t length, u16 fl)
{
- struct sbp2scsi_host_info *hi;
- struct scsi_id_instance_data *scsi_id = NULL, *scsi_id_tmp;
+ struct sbp2_fwhost_info *hi;
+ struct sbp2_lu *lu = NULL, *lu_tmp;
struct scsi_cmnd *SCpnt = NULL;
struct sbp2_status_block *sb;
u32 scsi_status = SBP2_SCSI_STATUS_GOOD;
- struct sbp2_command_info *command;
+ struct sbp2_command_info *cmd;
unsigned long flags;
- SBP2_DEBUG_ENTER();
-
- sbp2util_packet_dump(data, length, "sbp2 status write by device", (u32)addr);
-
if (unlikely(length < 8 || length > sizeof(struct sbp2_status_block))) {
SBP2_ERR("Wrong size of status block");
return RCODE_ADDRESS_ERROR;
@@ -2158,131 +1761,97 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
SBP2_ERR("host info is NULL - this is bad!");
return RCODE_ADDRESS_ERROR;
}
- /*
- * Find our scsi_id structure by looking at the status fifo address
- * written to by the sbp2 device.
- */
- list_for_each_entry(scsi_id_tmp, &hi->scsi_ids, scsi_list) {
- if (scsi_id_tmp->ne->nodeid == nodeid &&
- scsi_id_tmp->status_fifo_addr == addr) {
- scsi_id = scsi_id_tmp;
+
+ /* Find the unit which wrote the status. */
+ list_for_each_entry(lu_tmp, &hi->logical_units, lu_list) {
+ if (lu_tmp->ne->nodeid == nodeid &&
+ lu_tmp->status_fifo_addr == addr) {
+ lu = lu_tmp;
break;
}
}
- if (unlikely(!scsi_id)) {
- SBP2_ERR("scsi_id is NULL - device is gone?");
+ if (unlikely(!lu)) {
+ SBP2_ERR("lu is NULL - device is gone?");
return RCODE_ADDRESS_ERROR;
}
- /*
- * Put response into scsi_id status fifo buffer. The first two bytes
+ /* Put response into lu status fifo buffer. The first two bytes
* come in big endian bit order. Often the target writes only a
* truncated status block, minimally the first two quadlets. The rest
- * is implied to be zeros.
- */
- sb = &scsi_id->status_block;
+ * is implied to be zeros. */
+ sb = &lu->status_block;
memset(sb->command_set_dependent, 0, sizeof(sb->command_set_dependent));
memcpy(sb, data, length);
sbp2util_be32_to_cpu_buffer(sb, 8);
- /*
- * Ignore unsolicited status. Handle command ORB status.
- */
+ /* Ignore unsolicited status. Handle command ORB status. */
if (unlikely(STATUS_GET_SRC(sb->ORB_offset_hi_misc) == 2))
- command = NULL;
+ cmd = NULL;
else
- command = sbp2util_find_command_for_orb(scsi_id,
- sb->ORB_offset_lo);
- if (command) {
- SBP2_DEBUG("Found status for command ORB");
- pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma,
- sizeof(struct sbp2_command_orb),
- PCI_DMA_TODEVICE);
- pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma,
- sizeof(command->scatter_gather_element),
- PCI_DMA_BIDIRECTIONAL);
-
- SBP2_ORB_DEBUG("matched command orb %p", &command->command_orb);
- outstanding_orb_decr;
-
- /*
- * Matched status with command, now grab scsi command pointers
- * and check status.
- */
+ cmd = sbp2util_find_command_for_orb(lu, sb->ORB_offset_lo);
+ if (cmd) {
+ dma_sync_single_for_cpu(&hi->host->device, cmd->command_orb_dma,
+ sizeof(struct sbp2_command_orb),
+ DMA_TO_DEVICE);
+ dma_sync_single_for_cpu(&hi->host->device, cmd->sge_dma,
+ sizeof(cmd->scatter_gather_element),
+ DMA_BIDIRECTIONAL);
+ /* Grab SCSI command pointers and check status. */
/*
* FIXME: If the src field in the status is 1, the ORB DMA must
* not be reused until status for a subsequent ORB is received.
*/
- SCpnt = command->Current_SCpnt;
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- sbp2util_mark_command_completed(scsi_id, command);
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ SCpnt = cmd->Current_SCpnt;
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ sbp2util_mark_command_completed(lu, cmd);
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
if (SCpnt) {
u32 h = sb->ORB_offset_hi_misc;
u32 r = STATUS_GET_RESP(h);
if (r != RESP_STATUS_REQUEST_COMPLETE) {
- SBP2_WARN("resp 0x%x, sbp_status 0x%x",
+ SBP2_INFO("resp 0x%x, sbp_status 0x%x",
r, STATUS_GET_SBP_STATUS(h));
scsi_status =
r == RESP_STATUS_TRANSPORT_FAILURE ?
SBP2_SCSI_STATUS_BUSY :
SBP2_SCSI_STATUS_COMMAND_TERMINATED;
}
- /*
- * See if the target stored any scsi status information.
- */
- if (STATUS_GET_LEN(h) > 1) {
- SBP2_DEBUG("CHECK CONDITION");
+
+ if (STATUS_GET_LEN(h) > 1)
scsi_status = sbp2_status_to_sense_data(
(unchar *)sb, SCpnt->sense_buffer);
- }
- /*
- * Check to see if the dead bit is set. If so, we'll
- * have to initiate a fetch agent reset.
- */
- if (STATUS_TEST_DEAD(h)) {
- SBP2_DEBUG("Dead bit set - "
- "initiating fetch agent reset");
- sbp2_agent_reset(scsi_id, 0);
- }
- SBP2_ORB_DEBUG("completing command orb %p", &command->command_orb);
+
+ if (STATUS_TEST_DEAD(h))
+ sbp2_agent_reset(lu, 0);
}
- /*
- * Check here to see if there are no commands in-use. If there
+ /* Check here to see if there are no commands in-use. If there
* are none, we know that the fetch agent left the active state
* _and_ that we did not reactivate it yet. Therefore clear
* last_orb so that next time we write directly to the
* ORB_POINTER register. That way the fetch agent does not need
- * to refetch the next_ORB.
- */
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- if (list_empty(&scsi_id->sbp2_command_orb_inuse))
- scsi_id->last_orb = NULL;
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ * to refetch the next_ORB. */
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ if (list_empty(&lu->cmd_orb_inuse))
+ lu->last_orb = NULL;
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
} else {
- /*
- * It's probably a login/logout/reconnect status.
- */
- if ((sb->ORB_offset_lo == scsi_id->reconnect_orb_dma) ||
- (sb->ORB_offset_lo == scsi_id->login_orb_dma) ||
- (sb->ORB_offset_lo == scsi_id->query_logins_orb_dma) ||
- (sb->ORB_offset_lo == scsi_id->logout_orb_dma)) {
- scsi_id->access_complete = 1;
- wake_up_interruptible(&access_wq);
+ /* It's probably status after a management request. */
+ if ((sb->ORB_offset_lo == lu->reconnect_orb_dma) ||
+ (sb->ORB_offset_lo == lu->login_orb_dma) ||
+ (sb->ORB_offset_lo == lu->query_logins_orb_dma) ||
+ (sb->ORB_offset_lo == lu->logout_orb_dma)) {
+ lu->access_complete = 1;
+ wake_up_interruptible(&sbp2_access_wq);
}
}
- if (SCpnt) {
- SBP2_DEBUG("Completing SCSI command");
- sbp2scsi_complete_command(scsi_id, scsi_status, SCpnt,
- command->Current_done);
- SBP2_ORB_DEBUG("command orb completed");
- }
-
+ if (SCpnt)
+ sbp2scsi_complete_command(lu, scsi_status, SCpnt,
+ cmd->Current_done);
return RCODE_COMPLETE;
}
@@ -2290,77 +1859,57 @@ static int sbp2_handle_status_write(struct hpsb_host *host, int nodeid,
* SCSI interface related section
**************************************/
-/*
- * This routine is the main request entry routine for doing I/O. It is
- * called from the scsi stack directly.
- */
static int sbp2scsi_queuecommand(struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- struct scsi_id_instance_data *scsi_id =
- (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0];
- struct sbp2scsi_host_info *hi;
+ struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0];
+ struct sbp2_fwhost_info *hi;
int result = DID_NO_CONNECT << 16;
- SBP2_DEBUG_ENTER();
-#if (CONFIG_IEEE1394_SBP2_DEBUG >= 2) || defined(CONFIG_IEEE1394_SBP2_PACKET_DUMP)
- scsi_print_command(SCpnt);
-#endif
-
- if (!sbp2util_node_is_available(scsi_id))
+ if (unlikely(!sbp2util_node_is_available(lu)))
goto done;
- hi = scsi_id->hi;
+ hi = lu->hi;
- if (!hi) {
- SBP2_ERR("sbp2scsi_host_info is NULL - this is bad!");
+ if (unlikely(!hi)) {
+ SBP2_ERR("sbp2_fwhost_info is NULL - this is bad!");
goto done;
}
- /*
- * Until we handle multiple luns, just return selection time-out
- * to any IO directed at non-zero LUNs
- */
- if (SCpnt->device->lun)
+ /* Multiple units are currently represented to the SCSI core as separate
+ * targets, not as one target with multiple LUs. Therefore return
+ * selection time-out to any IO directed at non-zero LUNs. */
+ if (unlikely(SCpnt->device->lun))
goto done;
- /*
- * Check for request sense command, and handle it here
- * (autorequest sense)
- */
+ /* handle the request sense command here (auto-request sense) */
if (SCpnt->cmnd[0] == REQUEST_SENSE) {
- SBP2_DEBUG("REQUEST_SENSE");
- memcpy(SCpnt->request_buffer, SCpnt->sense_buffer, SCpnt->request_bufflen);
+ memcpy(SCpnt->request_buffer, SCpnt->sense_buffer,
+ SCpnt->request_bufflen);
memset(SCpnt->sense_buffer, 0, sizeof(SCpnt->sense_buffer));
- sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_GOOD, SCpnt, done);
+ sbp2scsi_complete_command(lu, SBP2_SCSI_STATUS_GOOD, SCpnt,
+ done);
return 0;
}
- /*
- * Check to see if we are in the middle of a bus reset.
- */
- if (!hpsb_node_entry_valid(scsi_id->ne)) {
+ if (unlikely(!hpsb_node_entry_valid(lu->ne))) {
SBP2_ERR("Bus reset in progress - rejecting command");
result = DID_BUS_BUSY << 16;
goto done;
}
- /*
- * Bidirectional commands are not yet implemented,
- * and unknown transfer direction not handled.
- */
- if (SCpnt->sc_data_direction == DMA_BIDIRECTIONAL) {
+ /* Bidirectional commands are not yet implemented,
+ * and unknown transfer direction not handled. */
+ if (unlikely(SCpnt->sc_data_direction == DMA_BIDIRECTIONAL)) {
SBP2_ERR("Cannot handle DMA_BIDIRECTIONAL - rejecting command");
result = DID_ERROR << 16;
goto done;
}
- /*
- * Try and send our SCSI command
- */
- if (sbp2_send_command(scsi_id, SCpnt, done)) {
+ if (sbp2_send_command(lu, SCpnt, done)) {
SBP2_ERR("Error sending SCSI command");
- sbp2scsi_complete_command(scsi_id, SBP2_SCSI_STATUS_SELECTION_TIMEOUT,
+ sbp2scsi_complete_command(lu,
+ SBP2_SCSI_STATUS_SELECTION_TIMEOUT,
SCpnt, done);
}
return 0;
@@ -2371,75 +1920,46 @@ done:
return 0;
}
-/*
- * This function is called in order to complete all outstanding SBP-2
- * commands (in case of resets, etc.).
- */
-static void sbp2scsi_complete_all_commands(struct scsi_id_instance_data *scsi_id,
- u32 status)
+static void sbp2scsi_complete_all_commands(struct sbp2_lu *lu, u32 status)
{
- struct sbp2scsi_host_info *hi = scsi_id->hi;
+ struct sbp2_fwhost_info *hi = lu->hi;
struct list_head *lh;
- struct sbp2_command_info *command;
+ struct sbp2_command_info *cmd;
unsigned long flags;
- SBP2_DEBUG_ENTER();
-
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- while (!list_empty(&scsi_id->sbp2_command_orb_inuse)) {
- SBP2_DEBUG("Found pending command to complete");
- lh = scsi_id->sbp2_command_orb_inuse.next;
- command = list_entry(lh, struct sbp2_command_info, list);
- pci_dma_sync_single_for_cpu(hi->host->pdev, command->command_orb_dma,
- sizeof(struct sbp2_command_orb),
- PCI_DMA_TODEVICE);
- pci_dma_sync_single_for_cpu(hi->host->pdev, command->sge_dma,
- sizeof(command->scatter_gather_element),
- PCI_DMA_BIDIRECTIONAL);
- sbp2util_mark_command_completed(scsi_id, command);
- if (command->Current_SCpnt) {
- command->Current_SCpnt->result = status << 16;
- command->Current_done(command->Current_SCpnt);
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ while (!list_empty(&lu->cmd_orb_inuse)) {
+ lh = lu->cmd_orb_inuse.next;
+ cmd = list_entry(lh, struct sbp2_command_info, list);
+ dma_sync_single_for_cpu(&hi->host->device, cmd->command_orb_dma,
+ sizeof(struct sbp2_command_orb),
+ DMA_TO_DEVICE);
+ dma_sync_single_for_cpu(&hi->host->device, cmd->sge_dma,
+ sizeof(cmd->scatter_gather_element),
+ DMA_BIDIRECTIONAL);
+ sbp2util_mark_command_completed(lu, cmd);
+ if (cmd->Current_SCpnt) {
+ cmd->Current_SCpnt->result = status << 16;
+ cmd->Current_done(cmd->Current_SCpnt);
}
}
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
return;
}
/*
- * This function is called in order to complete a regular SBP-2 command.
- *
- * This can be called in interrupt context.
+ * Complete a regular SCSI command. Can be called in atomic context.
*/
-static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
- u32 scsi_status, struct scsi_cmnd *SCpnt,
+static void sbp2scsi_complete_command(struct sbp2_lu *lu, u32 scsi_status,
+ struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- SBP2_DEBUG_ENTER();
-
- /*
- * Sanity
- */
if (!SCpnt) {
SBP2_ERR("SCpnt is NULL");
return;
}
- /*
- * If a bus reset is in progress and there was an error, don't
- * complete the command, just let it get retried at the end of the
- * bus reset.
- */
- if (!hpsb_node_entry_valid(scsi_id->ne)
- && (scsi_status != SBP2_SCSI_STATUS_GOOD)) {
- SBP2_ERR("Bus reset in progress - retry command later");
- return;
- }
-
- /*
- * Switch on scsi status
- */
switch (scsi_status) {
case SBP2_SCSI_STATUS_GOOD:
SCpnt->result = DID_OK << 16;
@@ -2451,12 +1971,7 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
break;
case SBP2_SCSI_STATUS_CHECK_CONDITION:
- SBP2_DEBUG("SBP2_SCSI_STATUS_CHECK_CONDITION");
SCpnt->result = CHECK_CONDITION << 1 | DID_OK << 16;
-#if CONFIG_IEEE1394_SBP2_DEBUG >= 1
- scsi_print_command(SCpnt);
- scsi_print_sense(SBP2_DEVICE_NAME, SCpnt);
-#endif
break;
case SBP2_SCSI_STATUS_SELECTION_TIMEOUT:
@@ -2478,118 +1993,88 @@ static void sbp2scsi_complete_command(struct scsi_id_instance_data *scsi_id,
SCpnt->result = DID_ERROR << 16;
}
- /*
- * If a bus reset is in progress and there was an error, complete
- * the command as busy so that it will get retried.
- */
- if (!hpsb_node_entry_valid(scsi_id->ne)
+ /* If a bus reset is in progress and there was an error, complete
+ * the command as busy so that it will get retried. */
+ if (!hpsb_node_entry_valid(lu->ne)
&& (scsi_status != SBP2_SCSI_STATUS_GOOD)) {
SBP2_ERR("Completing command with busy (bus reset)");
SCpnt->result = DID_BUS_BUSY << 16;
}
- /*
- * If a unit attention occurs, return busy status so it gets
- * retried... it could have happened because of a 1394 bus reset
- * or hot-plug...
- * XXX DID_BUS_BUSY is actually a bad idea because it will defy
- * the scsi layer's retry logic.
- */
-#if 0
- if ((scsi_status == SBP2_SCSI_STATUS_CHECK_CONDITION) &&
- (SCpnt->sense_buffer[2] == UNIT_ATTENTION)) {
- SBP2_DEBUG("UNIT ATTENTION - return busy");
- SCpnt->result = DID_BUS_BUSY << 16;
- }
-#endif
-
- /*
- * Tell scsi stack that we're done with this command
- */
+ /* Tell the SCSI stack that we're done with this command. */
done(SCpnt);
}
static int sbp2scsi_slave_alloc(struct scsi_device *sdev)
{
- struct scsi_id_instance_data *scsi_id =
- (struct scsi_id_instance_data *)sdev->host->hostdata[0];
+ struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0];
- scsi_id->sdev = sdev;
+ lu->sdev = sdev;
sdev->allow_restart = 1;
- if (scsi_id->workarounds & SBP2_WORKAROUND_INQUIRY_36)
+ if (lu->workarounds & SBP2_WORKAROUND_INQUIRY_36)
sdev->inquiry_len = 36;
return 0;
}
static int sbp2scsi_slave_configure(struct scsi_device *sdev)
{
- struct scsi_id_instance_data *scsi_id =
- (struct scsi_id_instance_data *)sdev->host->hostdata[0];
+ struct sbp2_lu *lu = (struct sbp2_lu *)sdev->host->hostdata[0];
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
sdev->use_10_for_rw = 1;
if (sdev->type == TYPE_DISK &&
- scsi_id->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
+ lu->workarounds & SBP2_WORKAROUND_MODE_SENSE_8)
sdev->skip_ms_page_8 = 1;
- if (scsi_id->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
+ if (lu->workarounds & SBP2_WORKAROUND_FIX_CAPACITY)
sdev->fix_capacity = 1;
return 0;
}
static void sbp2scsi_slave_destroy(struct scsi_device *sdev)
{
- ((struct scsi_id_instance_data *)sdev->host->hostdata[0])->sdev = NULL;
+ ((struct sbp2_lu *)sdev->host->hostdata[0])->sdev = NULL;
return;
}
/*
- * Called by scsi stack when something has really gone wrong. Usually
- * called when a command has timed-out for some reason.
+ * Called by scsi stack when something has really gone wrong.
+ * Usually called when a command has timed-out for some reason.
*/
static int sbp2scsi_abort(struct scsi_cmnd *SCpnt)
{
- struct scsi_id_instance_data *scsi_id =
- (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0];
- struct sbp2scsi_host_info *hi = scsi_id->hi;
- struct sbp2_command_info *command;
+ struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0];
+ struct sbp2_fwhost_info *hi = lu->hi;
+ struct sbp2_command_info *cmd;
unsigned long flags;
- SBP2_ERR("aborting sbp2 command");
+ SBP2_INFO("aborting sbp2 command");
scsi_print_command(SCpnt);
- if (sbp2util_node_is_available(scsi_id)) {
-
- /*
- * Right now, just return any matching command structures
- * to the free pool.
- */
- spin_lock_irqsave(&scsi_id->sbp2_command_orb_lock, flags);
- command = sbp2util_find_command_for_SCpnt(scsi_id, SCpnt);
- if (command) {
- SBP2_DEBUG("Found command to abort");
- pci_dma_sync_single_for_cpu(hi->host->pdev,
- command->command_orb_dma,
- sizeof(struct sbp2_command_orb),
- PCI_DMA_TODEVICE);
- pci_dma_sync_single_for_cpu(hi->host->pdev,
- command->sge_dma,
- sizeof(command->scatter_gather_element),
- PCI_DMA_BIDIRECTIONAL);
- sbp2util_mark_command_completed(scsi_id, command);
- if (command->Current_SCpnt) {
- command->Current_SCpnt->result = DID_ABORT << 16;
- command->Current_done(command->Current_SCpnt);
+ if (sbp2util_node_is_available(lu)) {
+ sbp2_agent_reset(lu, 1);
+
+ /* Return a matching command structure to the free pool. */
+ spin_lock_irqsave(&lu->cmd_orb_lock, flags);
+ cmd = sbp2util_find_command_for_SCpnt(lu, SCpnt);
+ if (cmd) {
+ dma_sync_single_for_cpu(&hi->host->device,
+ cmd->command_orb_dma,
+ sizeof(struct sbp2_command_orb),
+ DMA_TO_DEVICE);
+ dma_sync_single_for_cpu(&hi->host->device, cmd->sge_dma,
+ sizeof(cmd->scatter_gather_element),
+ DMA_BIDIRECTIONAL);
+ sbp2util_mark_command_completed(lu, cmd);
+ if (cmd->Current_SCpnt) {
+ cmd->Current_SCpnt->result = DID_ABORT << 16;
+ cmd->Current_done(cmd->Current_SCpnt);
}
}
- spin_unlock_irqrestore(&scsi_id->sbp2_command_orb_lock, flags);
+ spin_unlock_irqrestore(&lu->cmd_orb_lock, flags);
- /*
- * Initiate a fetch agent reset.
- */
- sbp2_agent_reset(scsi_id, 1);
- sbp2scsi_complete_all_commands(scsi_id, DID_BUS_BUSY);
+ sbp2scsi_complete_all_commands(lu, DID_BUS_BUSY);
}
return SUCCESS;
@@ -2600,14 +2085,13 @@ static int sbp2scsi_abort(struct scsi_cmnd *SCpnt)
*/
static int sbp2scsi_reset(struct scsi_cmnd *SCpnt)
{
- struct scsi_id_instance_data *scsi_id =
- (struct scsi_id_instance_data *)SCpnt->device->host->hostdata[0];
+ struct sbp2_lu *lu = (struct sbp2_lu *)SCpnt->device->host->hostdata[0];
- SBP2_ERR("reset requested");
+ SBP2_INFO("reset requested");
- if (sbp2util_node_is_available(scsi_id)) {
- SBP2_ERR("Generating sbp2 fetch agent reset");
- sbp2_agent_reset(scsi_id, 1);
+ if (sbp2util_node_is_available(lu)) {
+ SBP2_INFO("generating sbp2 fetch agent reset");
+ sbp2_agent_reset(lu, 1);
}
return SUCCESS;
@@ -2618,90 +2102,50 @@ static ssize_t sbp2_sysfs_ieee1394_id_show(struct device *dev,
char *buf)
{
struct scsi_device *sdev;
- struct scsi_id_instance_data *scsi_id;
- int lun;
+ struct sbp2_lu *lu;
if (!(sdev = to_scsi_device(dev)))
return 0;
- if (!(scsi_id = (struct scsi_id_instance_data *)sdev->host->hostdata[0]))
+ if (!(lu = (struct sbp2_lu *)sdev->host->hostdata[0]))
return 0;
- lun = ORB_SET_LUN(scsi_id->sbp2_lun);
-
- return sprintf(buf, "%016Lx:%d:%d\n", (unsigned long long)scsi_id->ne->guid,
- scsi_id->ud->id, lun);
+ return sprintf(buf, "%016Lx:%d:%d\n", (unsigned long long)lu->ne->guid,
+ lu->ud->id, ORB_SET_LUN(lu->lun));
}
-static DEVICE_ATTR(ieee1394_id, S_IRUGO, sbp2_sysfs_ieee1394_id_show, NULL);
-
-static struct device_attribute *sbp2_sysfs_sdev_attrs[] = {
- &dev_attr_ieee1394_id,
- NULL
-};
MODULE_AUTHOR("Ben Collins <bcollins@debian.org>");
MODULE_DESCRIPTION("IEEE-1394 SBP-2 protocol driver");
MODULE_SUPPORTED_DEVICE(SBP2_DEVICE_NAME);
MODULE_LICENSE("GPL");
-/* SCSI host template */
-static struct scsi_host_template scsi_driver_template = {
- .module = THIS_MODULE,
- .name = "SBP-2 IEEE-1394",
- .proc_name = SBP2_DEVICE_NAME,
- .queuecommand = sbp2scsi_queuecommand,
- .eh_abort_handler = sbp2scsi_abort,
- .eh_device_reset_handler = sbp2scsi_reset,
- .slave_alloc = sbp2scsi_slave_alloc,
- .slave_configure = sbp2scsi_slave_configure,
- .slave_destroy = sbp2scsi_slave_destroy,
- .this_id = -1,
- .sg_tablesize = SG_ALL,
- .use_clustering = ENABLE_CLUSTERING,
- .cmd_per_lun = SBP2_MAX_CMDS,
- .can_queue = SBP2_MAX_CMDS,
- .emulated = 1,
- .sdev_attrs = sbp2_sysfs_sdev_attrs,
-};
-
static int sbp2_module_init(void)
{
int ret;
- SBP2_DEBUG_ENTER();
-
- /* Module load debug option to force one command at a time (serializing I/O) */
- if (serialize_io) {
- SBP2_INFO("Driver forced to serialize I/O (serialize_io=1)");
- SBP2_INFO("Try serialize_io=0 for better performance");
- scsi_driver_template.can_queue = 1;
- scsi_driver_template.cmd_per_lun = 1;
+ if (sbp2_serialize_io) {
+ sbp2_shost_template.can_queue = 1;
+ sbp2_shost_template.cmd_per_lun = 1;
}
if (sbp2_default_workarounds & SBP2_WORKAROUND_128K_MAX_TRANS &&
- (max_sectors * 512) > (128 * 1024))
- max_sectors = 128 * 1024 / 512;
- scsi_driver_template.max_sectors = max_sectors;
+ (sbp2_max_sectors * 512) > (128 * 1024))
+ sbp2_max_sectors = 128 * 1024 / 512;
+ sbp2_shost_template.max_sectors = sbp2_max_sectors;
- /* Register our high level driver with 1394 stack */
hpsb_register_highlevel(&sbp2_highlevel);
-
ret = hpsb_register_protocol(&sbp2_driver);
if (ret) {
SBP2_ERR("Failed to register protocol");
hpsb_unregister_highlevel(&sbp2_highlevel);
return ret;
}
-
return 0;
}
static void __exit sbp2_module_exit(void)
{
- SBP2_DEBUG_ENTER();
-
hpsb_unregister_protocol(&sbp2_driver);
-
hpsb_unregister_highlevel(&sbp2_highlevel);
}