summaryrefslogtreecommitdiff
path: root/drivers/iio/adc
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/adc')
-rw-r--r--drivers/iio/adc/Kconfig25
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/ad799x.c791
-rw-r--r--drivers/iio/adc/at91_adc.c340
-rw-r--r--drivers/iio/adc/exynos_adc.c137
-rw-r--r--drivers/iio/adc/max1363.c16
-rw-r--r--drivers/iio/adc/mcp3422.c33
7 files changed, 1213 insertions, 130 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index d86196cfe4b4..a80d23628f14 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -96,9 +96,21 @@ config AD7923
To compile this driver as a module, choose M here: the
module will be called ad7923.
+config AD799X
+ tristate "Analog Devices AD799x ADC driver"
+ depends on I2C
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Say yes here to build support for Analog Devices:
+ ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998
+ i2c analog to digital converters (ADC). Provides direct access
+ via sysfs.
+
config AT91_ADC
tristate "Atmel AT91 ADC"
depends on ARCH_AT91
+ depends on INPUT
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select SYSFS
@@ -106,15 +118,15 @@ config AT91_ADC
Say yes here to build support for Atmel AT91 ADC.
config EXYNOS_ADC
- bool "Exynos ADC driver support"
- depends on OF
+ tristate "Exynos ADC driver support"
+ depends on ARCH_EXYNOS || (OF && COMPILE_TEST)
help
Core support for the ADC block found in the Samsung EXYNOS series
of SoCs for drivers such as the touchscreen and hwmon to use to share
this resource.
config LP8788_ADC
- bool "LP8788 ADC driver"
+ tristate "LP8788 ADC driver"
depends on MFD_LP8788
help
Say yes here to build support for TI LP8788 ADC.
@@ -146,11 +158,12 @@ config MCP320X
called mcp320x.
config MCP3422
- tristate "Microchip Technology MCP3422/3/4 driver"
+ tristate "Microchip Technology MCP3422/3/4/6/7/8 driver"
depends on I2C
help
- Say yes here to build support for Microchip Technology's MCP3422,
- MCP3423 or MCP3424 analog to digital converters.
+ Say yes here to build support for Microchip Technology's
+ MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428
+ analog to digital converters.
This driver can also be built as a module. If so, the module will be
called mcp3422.
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index ab346d88c688..9d60f2deaaaf 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_AD7476) += ad7476.o
obj-$(CONFIG_AD7791) += ad7791.o
obj-$(CONFIG_AD7793) += ad7793.o
obj-$(CONFIG_AD7887) += ad7887.o
+obj-$(CONFIG_AD799X) += ad799x.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
diff --git a/drivers/iio/adc/ad799x.c b/drivers/iio/adc/ad799x.c
new file mode 100644
index 000000000000..39b4cb48d738
--- /dev/null
+++ b/drivers/iio/adc/ad799x.c
@@ -0,0 +1,791 @@
+/*
+ * iio/adc/ad799x.c
+ * Copyright (C) 2010-2011 Michael Hennerich, Analog Devices Inc.
+ *
+ * based on iio/adc/max1363
+ * Copyright (C) 2008-2010 Jonathan Cameron
+ *
+ * based on linux/drivers/i2c/chips/max123x
+ * Copyright (C) 2002-2004 Stefan Eletzhofer
+ *
+ * based on linux/drivers/acron/char/pcf8583.c
+ * Copyright (C) 2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * ad799x.c
+ *
+ * Support for ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997,
+ * ad7998 and similar chips.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define AD799X_CHANNEL_SHIFT 4
+#define AD799X_STORAGEBITS 16
+/*
+ * AD7991, AD7995 and AD7999 defines
+ */
+
+#define AD7991_REF_SEL 0x08
+#define AD7991_FLTR 0x04
+#define AD7991_BIT_TRIAL_DELAY 0x02
+#define AD7991_SAMPLE_DELAY 0x01
+
+/*
+ * AD7992, AD7993, AD7994, AD7997 and AD7998 defines
+ */
+
+#define AD7998_FLTR 0x08
+#define AD7998_ALERT_EN 0x04
+#define AD7998_BUSY_ALERT 0x02
+#define AD7998_BUSY_ALERT_POL 0x01
+
+#define AD7998_CONV_RES_REG 0x0
+#define AD7998_ALERT_STAT_REG 0x1
+#define AD7998_CONF_REG 0x2
+#define AD7998_CYCLE_TMR_REG 0x3
+
+#define AD7998_DATALOW_REG(x) ((x) * 3 + 0x4)
+#define AD7998_DATAHIGH_REG(x) ((x) * 3 + 0x5)
+#define AD7998_HYST_REG(x) ((x) * 3 + 0x6)
+
+#define AD7998_CYC_MASK 0x7
+#define AD7998_CYC_DIS 0x0
+#define AD7998_CYC_TCONF_32 0x1
+#define AD7998_CYC_TCONF_64 0x2
+#define AD7998_CYC_TCONF_128 0x3
+#define AD7998_CYC_TCONF_256 0x4
+#define AD7998_CYC_TCONF_512 0x5
+#define AD7998_CYC_TCONF_1024 0x6
+#define AD7998_CYC_TCONF_2048 0x7
+
+#define AD7998_ALERT_STAT_CLEAR 0xFF
+
+/*
+ * AD7997 and AD7997 defines
+ */
+
+#define AD7997_8_READ_SINGLE 0x80
+#define AD7997_8_READ_SEQUENCE 0x70
+/* TODO: move this into a common header */
+#define RES_MASK(bits) ((1 << (bits)) - 1)
+
+enum {
+ ad7991,
+ ad7995,
+ ad7999,
+ ad7992,
+ ad7993,
+ ad7994,
+ ad7997,
+ ad7998
+};
+
+/**
+ * struct ad799x_chip_info - chip specific information
+ * @channel: channel specification
+ * @num_channels: number of channels
+ * @monitor_mode: whether the chip supports monitor interrupts
+ * @default_config: device default configuration
+ * @event_attrs: pointer to the monitor event attribute group
+ */
+struct ad799x_chip_info {
+ struct iio_chan_spec channel[9];
+ int num_channels;
+ u16 default_config;
+ const struct iio_info *info;
+};
+
+struct ad799x_state {
+ struct i2c_client *client;
+ const struct ad799x_chip_info *chip_info;
+ struct regulator *reg;
+ struct regulator *vref;
+ unsigned id;
+ u16 config;
+
+ u8 *rx_buf;
+ unsigned int transfer_size;
+};
+
+/**
+ * ad799x_trigger_handler() bh of trigger launched polling to ring buffer
+ *
+ * Currently there is no option in this driver to disable the saving of
+ * timestamps within the ring.
+ **/
+static irqreturn_t ad799x_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct ad799x_state *st = iio_priv(indio_dev);
+ int b_sent;
+ u8 cmd;
+
+ switch (st->id) {
+ case ad7991:
+ case ad7995:
+ case ad7999:
+ cmd = st->config |
+ (*indio_dev->active_scan_mask << AD799X_CHANNEL_SHIFT);
+ break;
+ case ad7992:
+ case ad7993:
+ case ad7994:
+ cmd = (*indio_dev->active_scan_mask << AD799X_CHANNEL_SHIFT) |
+ AD7998_CONV_RES_REG;
+ break;
+ case ad7997:
+ case ad7998:
+ cmd = AD7997_8_READ_SEQUENCE | AD7998_CONV_RES_REG;
+ break;
+ default:
+ cmd = 0;
+ }
+
+ b_sent = i2c_smbus_read_i2c_block_data(st->client,
+ cmd, st->transfer_size, st->rx_buf);
+ if (b_sent < 0)
+ goto out;
+
+ iio_push_to_buffers_with_timestamp(indio_dev, st->rx_buf,
+ iio_get_time_ns());
+out:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * ad799x register access by I2C
+ */
+static int ad799x_i2c_read16(struct ad799x_state *st, u8 reg, u16 *data)
+{
+ struct i2c_client *client = st->client;
+ int ret = 0;
+
+ ret = i2c_smbus_read_word_swapped(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C read error\n");
+ return ret;
+ }
+
+ *data = (u16)ret;
+
+ return 0;
+}
+
+static int ad799x_i2c_read8(struct ad799x_state *st, u8 reg, u8 *data)
+{
+ struct i2c_client *client = st->client;
+ int ret = 0;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev, "I2C read error\n");
+ return ret;
+ }
+
+ *data = (u8)ret;
+
+ return 0;
+}
+
+static int ad799x_i2c_write16(struct ad799x_state *st, u8 reg, u16 data)
+{
+ struct i2c_client *client = st->client;
+ int ret = 0;
+
+ ret = i2c_smbus_write_word_swapped(client, reg, data);
+ if (ret < 0)
+ dev_err(&client->dev, "I2C write error\n");
+
+ return ret;
+}
+
+static int ad799x_i2c_write8(struct ad799x_state *st, u8 reg, u8 data)
+{
+ struct i2c_client *client = st->client;
+ int ret = 0;
+
+ ret = i2c_smbus_write_byte_data(client, reg, data);
+ if (ret < 0)
+ dev_err(&client->dev, "I2C write error\n");
+
+ return ret;
+}
+
+static int ad7997_8_update_scan_mode(struct iio_dev *indio_dev,
+ const unsigned long *scan_mask)
+{
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ kfree(st->rx_buf);
+ st->rx_buf = kmalloc(indio_dev->scan_bytes, GFP_KERNEL);
+ if (!st->rx_buf)
+ return -ENOMEM;
+
+ st->transfer_size = bitmap_weight(scan_mask, indio_dev->masklength) * 2;
+
+ switch (st->id) {
+ case ad7997:
+ case ad7998:
+ return ad799x_i2c_write16(st, AD7998_CONF_REG,
+ st->config | (*scan_mask << AD799X_CHANNEL_SHIFT));
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch)
+{
+ u16 rxbuf;
+ u8 cmd;
+ int ret;
+
+ switch (st->id) {
+ case ad7991:
+ case ad7995:
+ case ad7999:
+ cmd = st->config | ((1 << ch) << AD799X_CHANNEL_SHIFT);
+ break;
+ case ad7992:
+ case ad7993:
+ case ad7994:
+ cmd = (1 << ch) << AD799X_CHANNEL_SHIFT;
+ break;
+ case ad7997:
+ case ad7998:
+ cmd = (ch << AD799X_CHANNEL_SHIFT) | AD7997_8_READ_SINGLE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = ad799x_i2c_read16(st, cmd, &rxbuf);
+ if (ret < 0)
+ return ret;
+
+ return rxbuf;
+}
+
+static int ad799x_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long m)
+{
+ int ret;
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ switch (m) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ if (iio_buffer_enabled(indio_dev))
+ ret = -EBUSY;
+ else
+ ret = ad799x_scan_direct(st, chan->scan_index);
+ mutex_unlock(&indio_dev->mlock);
+
+ if (ret < 0)
+ return ret;
+ *val = (ret >> chan->scan_type.shift) &
+ RES_MASK(chan->scan_type.realbits);
+ return IIO_VAL_INT;
+ case IIO_CHAN_INFO_SCALE:
+ ret = regulator_get_voltage(st->vref);
+ if (ret < 0)
+ return ret;
+ *val = ret / 1000;
+ *val2 = chan->scan_type.realbits;
+ return IIO_VAL_FRACTIONAL_LOG2;
+ }
+ return -EINVAL;
+}
+static const unsigned int ad7998_frequencies[] = {
+ [AD7998_CYC_DIS] = 0,
+ [AD7998_CYC_TCONF_32] = 15625,
+ [AD7998_CYC_TCONF_64] = 7812,
+ [AD7998_CYC_TCONF_128] = 3906,
+ [AD7998_CYC_TCONF_512] = 976,
+ [AD7998_CYC_TCONF_1024] = 488,
+ [AD7998_CYC_TCONF_2048] = 244,
+};
+static ssize_t ad799x_read_frequency(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ int ret;
+ u8 val;
+ ret = ad799x_i2c_read8(st, AD7998_CYCLE_TMR_REG, &val);
+ if (ret)
+ return ret;
+
+ val &= AD7998_CYC_MASK;
+
+ return sprintf(buf, "%u\n", ad7998_frequencies[val]);
+}
+
+static ssize_t ad799x_write_frequency(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t len)
+{
+ struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ long val;
+ int ret, i;
+ u8 t;
+
+ ret = kstrtol(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&indio_dev->mlock);
+ ret = ad799x_i2c_read8(st, AD7998_CYCLE_TMR_REG, &t);
+ if (ret)
+ goto error_ret_mutex;
+ /* Wipe the bits clean */
+ t &= ~AD7998_CYC_MASK;
+
+ for (i = 0; i < ARRAY_SIZE(ad7998_frequencies); i++)
+ if (val == ad7998_frequencies[i])
+ break;
+ if (i == ARRAY_SIZE(ad7998_frequencies)) {
+ ret = -EINVAL;
+ goto error_ret_mutex;
+ }
+ t |= i;
+ ret = ad799x_i2c_write8(st, AD7998_CYCLE_TMR_REG, t);
+
+error_ret_mutex:
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret ? ret : len;
+}
+
+static int ad799x_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ return 1;
+}
+
+static unsigned int ad799x_threshold_reg(const struct iio_chan_spec *chan,
+ enum iio_event_direction dir,
+ enum iio_event_info info)
+{
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ if (dir == IIO_EV_DIR_FALLING)
+ return AD7998_DATALOW_REG(chan->channel);
+ else
+ return AD7998_DATAHIGH_REG(chan->channel);
+ case IIO_EV_INFO_HYSTERESIS:
+ return AD7998_HYST_REG(chan->channel);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ad799x_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ int ret;
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ ret = ad799x_i2c_write16(st, ad799x_threshold_reg(chan, dir, info),
+ val);
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int ad799x_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ int ret;
+ struct ad799x_state *st = iio_priv(indio_dev);
+ u16 valin;
+
+ mutex_lock(&indio_dev->mlock);
+ ret = ad799x_i2c_read16(st, ad799x_threshold_reg(chan, dir, info),
+ &valin);
+ mutex_unlock(&indio_dev->mlock);
+ if (ret < 0)
+ return ret;
+ *val = valin;
+
+ return IIO_VAL_INT;
+}
+
+static irqreturn_t ad799x_event_handler(int irq, void *private)
+{
+ struct iio_dev *indio_dev = private;
+ struct ad799x_state *st = iio_priv(private);
+ u8 status;
+ int i, ret;
+
+ ret = ad799x_i2c_read8(st, AD7998_ALERT_STAT_REG, &status);
+ if (ret)
+ goto done;
+
+ if (!status)
+ goto done;
+
+ ad799x_i2c_write8(st, AD7998_ALERT_STAT_REG, AD7998_ALERT_STAT_CLEAR);
+
+ for (i = 0; i < 8; i++) {
+ if (status & (1 << i))
+ iio_push_event(indio_dev,
+ i & 0x1 ?
+ IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE,
+ (i >> 1),
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_RISING) :
+ IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE,
+ (i >> 1),
+ IIO_EV_TYPE_THRESH,
+ IIO_EV_DIR_FALLING),
+ iio_get_time_ns());
+ }
+
+done:
+ return IRQ_HANDLED;
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+ ad799x_read_frequency,
+ ad799x_write_frequency);
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("15625 7812 3906 1953 976 488 244 0");
+
+static struct attribute *ad799x_event_attributes[] = {
+ &iio_dev_attr_sampling_frequency.dev_attr.attr,
+ &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ NULL,
+};
+
+static struct attribute_group ad799x_event_attrs_group = {
+ .attrs = ad799x_event_attributes,
+ .name = "events",
+};
+
+static const struct iio_info ad7991_info = {
+ .read_raw = &ad799x_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static const struct iio_info ad7993_4_7_8_info = {
+ .read_raw = &ad799x_read_raw,
+ .event_attrs = &ad799x_event_attrs_group,
+ .read_event_config = &ad799x_read_event_config,
+ .read_event_value = &ad799x_read_event_value,
+ .write_event_value = &ad799x_write_event_value,
+ .driver_module = THIS_MODULE,
+ .update_scan_mode = ad7997_8_update_scan_mode,
+};
+
+static const struct iio_event_spec ad799x_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_EITHER,
+ .mask_separate = BIT(IIO_EV_INFO_HYSTERESIS),
+ },
+};
+
+#define _AD799X_CHANNEL(_index, _realbits, _ev_spec, _num_ev_spec) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_index), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = (_index), \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = (_realbits), \
+ .storagebits = 16, \
+ .shift = 12 - (_realbits), \
+ .endianness = IIO_BE, \
+ }, \
+ .event_spec = _ev_spec, \
+ .num_event_specs = _num_ev_spec, \
+}
+
+#define AD799X_CHANNEL(_index, _realbits) \
+ _AD799X_CHANNEL(_index, _realbits, NULL, 0)
+
+#define AD799X_CHANNEL_WITH_EVENTS(_index, _realbits) \
+ _AD799X_CHANNEL(_index, _realbits, ad799x_events, \
+ ARRAY_SIZE(ad799x_events))
+
+static const struct ad799x_chip_info ad799x_chip_info_tbl[] = {
+ [ad7991] = {
+ .channel = {
+ AD799X_CHANNEL(0, 12),
+ AD799X_CHANNEL(1, 12),
+ AD799X_CHANNEL(2, 12),
+ AD799X_CHANNEL(3, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .info = &ad7991_info,
+ },
+ [ad7995] = {
+ .channel = {
+ AD799X_CHANNEL(0, 10),
+ AD799X_CHANNEL(1, 10),
+ AD799X_CHANNEL(2, 10),
+ AD799X_CHANNEL(3, 10),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .info = &ad7991_info,
+ },
+ [ad7999] = {
+ .channel = {
+ AD799X_CHANNEL(0, 8),
+ AD799X_CHANNEL(1, 8),
+ AD799X_CHANNEL(2, 8),
+ AD799X_CHANNEL(3, 8),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .info = &ad7991_info,
+ },
+ [ad7992] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 12),
+ AD799X_CHANNEL_WITH_EVENTS(1, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(3),
+ },
+ .num_channels = 3,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+ [ad7993] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 10),
+ AD799X_CHANNEL_WITH_EVENTS(1, 10),
+ AD799X_CHANNEL_WITH_EVENTS(2, 10),
+ AD799X_CHANNEL_WITH_EVENTS(3, 10),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+ [ad7994] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 12),
+ AD799X_CHANNEL_WITH_EVENTS(1, 12),
+ AD799X_CHANNEL_WITH_EVENTS(2, 12),
+ AD799X_CHANNEL_WITH_EVENTS(3, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+ },
+ .num_channels = 5,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+ [ad7997] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 10),
+ AD799X_CHANNEL_WITH_EVENTS(1, 10),
+ AD799X_CHANNEL_WITH_EVENTS(2, 10),
+ AD799X_CHANNEL_WITH_EVENTS(3, 10),
+ AD799X_CHANNEL(4, 10),
+ AD799X_CHANNEL(5, 10),
+ AD799X_CHANNEL(6, 10),
+ AD799X_CHANNEL(7, 10),
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+ },
+ .num_channels = 9,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+ [ad7998] = {
+ .channel = {
+ AD799X_CHANNEL_WITH_EVENTS(0, 12),
+ AD799X_CHANNEL_WITH_EVENTS(1, 12),
+ AD799X_CHANNEL_WITH_EVENTS(2, 12),
+ AD799X_CHANNEL_WITH_EVENTS(3, 12),
+ AD799X_CHANNEL(4, 12),
+ AD799X_CHANNEL(5, 12),
+ AD799X_CHANNEL(6, 12),
+ AD799X_CHANNEL(7, 12),
+ IIO_CHAN_SOFT_TIMESTAMP(8),
+ },
+ .num_channels = 9,
+ .default_config = AD7998_ALERT_EN,
+ .info = &ad7993_4_7_8_info,
+ },
+};
+
+static int ad799x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct ad799x_state *st;
+ struct iio_dev *indio_dev;
+
+ indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+ if (indio_dev == NULL)
+ return -ENOMEM;
+
+ st = iio_priv(indio_dev);
+ /* this is only used for device removal purposes */
+ i2c_set_clientdata(client, indio_dev);
+
+ st->id = id->driver_data;
+ st->chip_info = &ad799x_chip_info_tbl[st->id];
+ st->config = st->chip_info->default_config;
+
+ /* TODO: Add pdata options for filtering and bit delay */
+
+ st->reg = devm_regulator_get(&client->dev, "vcc");
+ if (IS_ERR(st->reg))
+ return PTR_ERR(st->reg);
+ ret = regulator_enable(st->reg);
+ if (ret)
+ return ret;
+ st->vref = devm_regulator_get(&client->dev, "vref");
+ if (IS_ERR(st->vref)) {
+ ret = PTR_ERR(st->vref);
+ goto error_disable_reg;
+ }
+ ret = regulator_enable(st->vref);
+ if (ret)
+ goto error_disable_reg;
+
+ st->client = client;
+
+ indio_dev->dev.parent = &client->dev;
+ indio_dev->name = id->name;
+ indio_dev->info = st->chip_info->info;
+
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = st->chip_info->channel;
+ indio_dev->num_channels = st->chip_info->num_channels;
+
+ ret = iio_triggered_buffer_setup(indio_dev, NULL,
+ &ad799x_trigger_handler, NULL);
+ if (ret)
+ goto error_disable_vref;
+
+ if (client->irq > 0) {
+ ret = devm_request_threaded_irq(&client->dev,
+ client->irq,
+ NULL,
+ ad799x_event_handler,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ client->name,
+ indio_dev);
+ if (ret)
+ goto error_cleanup_ring;
+ }
+ ret = iio_device_register(indio_dev);
+ if (ret)
+ goto error_cleanup_ring;
+
+ return 0;
+
+error_cleanup_ring:
+ iio_triggered_buffer_cleanup(indio_dev);
+error_disable_vref:
+ regulator_disable(st->vref);
+error_disable_reg:
+ regulator_disable(st->reg);
+
+ return ret;
+}
+
+static int ad799x_remove(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev = i2c_get_clientdata(client);
+ struct ad799x_state *st = iio_priv(indio_dev);
+
+ iio_device_unregister(indio_dev);
+
+ iio_triggered_buffer_cleanup(indio_dev);
+ regulator_disable(st->vref);
+ regulator_disable(st->reg);
+ kfree(st->rx_buf);
+
+ return 0;
+}
+
+static const struct i2c_device_id ad799x_id[] = {
+ { "ad7991", ad7991 },
+ { "ad7995", ad7995 },
+ { "ad7999", ad7999 },
+ { "ad7992", ad7992 },
+ { "ad7993", ad7993 },
+ { "ad7994", ad7994 },
+ { "ad7997", ad7997 },
+ { "ad7998", ad7998 },
+ {}
+};
+
+MODULE_DEVICE_TABLE(i2c, ad799x_id);
+
+static struct i2c_driver ad799x_driver = {
+ .driver = {
+ .name = "ad799x",
+ },
+ .probe = ad799x_probe,
+ .remove = ad799x_remove,
+ .id_table = ad799x_id,
+};
+module_i2c_driver(ad799x_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD799x ADC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c
index 89777ed9abd8..3b5bacd4d8da 100644
--- a/drivers/iio/adc/at91_adc.c
+++ b/drivers/iio/adc/at91_adc.c
@@ -31,7 +31,108 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
-#include <mach/at91_adc.h>
+/* Registers */
+#define AT91_ADC_CR 0x00 /* Control Register */
+#define AT91_ADC_SWRST (1 << 0) /* Software Reset */
+#define AT91_ADC_START (1 << 1) /* Start Conversion */
+
+#define AT91_ADC_MR 0x04 /* Mode Register */
+#define AT91_ADC_TSAMOD (3 << 0) /* ADC mode */
+#define AT91_ADC_TSAMOD_ADC_ONLY_MODE (0 << 0) /* ADC Mode */
+#define AT91_ADC_TSAMOD_TS_ONLY_MODE (1 << 0) /* Touch Screen Only Mode */
+#define AT91_ADC_TRGEN (1 << 0) /* Trigger Enable */
+#define AT91_ADC_TRGSEL (7 << 1) /* Trigger Selection */
+#define AT91_ADC_TRGSEL_TC0 (0 << 1)
+#define AT91_ADC_TRGSEL_TC1 (1 << 1)
+#define AT91_ADC_TRGSEL_TC2 (2 << 1)
+#define AT91_ADC_TRGSEL_EXTERNAL (6 << 1)
+#define AT91_ADC_LOWRES (1 << 4) /* Low Resolution */
+#define AT91_ADC_SLEEP (1 << 5) /* Sleep Mode */
+#define AT91_ADC_PENDET (1 << 6) /* Pen contact detection enable */
+#define AT91_ADC_PRESCAL_9260 (0x3f << 8) /* Prescalar Rate Selection */
+#define AT91_ADC_PRESCAL_9G45 (0xff << 8)
+#define AT91_ADC_PRESCAL_(x) ((x) << 8)
+#define AT91_ADC_STARTUP_9260 (0x1f << 16) /* Startup Up Time */
+#define AT91_ADC_STARTUP_9G45 (0x7f << 16)
+#define AT91_ADC_STARTUP_9X5 (0xf << 16)
+#define AT91_ADC_STARTUP_(x) ((x) << 16)
+#define AT91_ADC_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_SHTIM_(x) ((x) << 24)
+#define AT91_ADC_PENDBC (0x0f << 28) /* Pen Debounce time */
+#define AT91_ADC_PENDBC_(x) ((x) << 28)
+
+#define AT91_ADC_TSR 0x0C
+#define AT91_ADC_TSR_SHTIM (0xf << 24) /* Sample & Hold Time */
+#define AT91_ADC_TSR_SHTIM_(x) ((x) << 24)
+
+#define AT91_ADC_CHER 0x10 /* Channel Enable Register */
+#define AT91_ADC_CHDR 0x14 /* Channel Disable Register */
+#define AT91_ADC_CHSR 0x18 /* Channel Status Register */
+#define AT91_ADC_CH(n) (1 << (n)) /* Channel Number */
+
+#define AT91_ADC_SR 0x1C /* Status Register */
+#define AT91_ADC_EOC(n) (1 << (n)) /* End of Conversion on Channel N */
+#define AT91_ADC_OVRE(n) (1 << ((n) + 8))/* Overrun Error on Channel N */
+#define AT91_ADC_DRDY (1 << 16) /* Data Ready */
+#define AT91_ADC_GOVRE (1 << 17) /* General Overrun Error */
+#define AT91_ADC_ENDRX (1 << 18) /* End of RX Buffer */
+#define AT91_ADC_RXFUFF (1 << 19) /* RX Buffer Full */
+
+#define AT91_ADC_SR_9X5 0x30 /* Status Register for 9x5 */
+#define AT91_ADC_SR_DRDY_9X5 (1 << 24) /* Data Ready */
+
+#define AT91_ADC_LCDR 0x20 /* Last Converted Data Register */
+#define AT91_ADC_LDATA (0x3ff)
+
+#define AT91_ADC_IER 0x24 /* Interrupt Enable Register */
+#define AT91_ADC_IDR 0x28 /* Interrupt Disable Register */
+#define AT91_ADC_IMR 0x2C /* Interrupt Mask Register */
+#define AT91RL_ADC_IER_PEN (1 << 20)
+#define AT91RL_ADC_IER_NOPEN (1 << 21)
+#define AT91_ADC_IER_PEN (1 << 29)
+#define AT91_ADC_IER_NOPEN (1 << 30)
+#define AT91_ADC_IER_XRDY (1 << 20)
+#define AT91_ADC_IER_YRDY (1 << 21)
+#define AT91_ADC_IER_PRDY (1 << 22)
+#define AT91_ADC_ISR_PENS (1 << 31)
+
+#define AT91_ADC_CHR(n) (0x30 + ((n) * 4)) /* Channel Data Register N */
+#define AT91_ADC_DATA (0x3ff)
+
+#define AT91_ADC_CDR0_9X5 (0x50) /* Channel Data Register 0 for 9X5 */
+
+#define AT91_ADC_ACR 0x94 /* Analog Control Register */
+#define AT91_ADC_ACR_PENDETSENS (0x3 << 0) /* pull-up resistor */
+
+#define AT91_ADC_TSMR 0xB0
+#define AT91_ADC_TSMR_TSMODE (3 << 0) /* Touch Screen Mode */
+#define AT91_ADC_TSMR_TSMODE_NONE (0 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_NO_PRESS (1 << 0)
+#define AT91_ADC_TSMR_TSMODE_4WIRE_PRESS (2 << 0)
+#define AT91_ADC_TSMR_TSMODE_5WIRE (3 << 0)
+#define AT91_ADC_TSMR_TSAV (3 << 4) /* Averages samples */
+#define AT91_ADC_TSMR_TSAV_(x) ((x) << 4)
+#define AT91_ADC_TSMR_SCTIM (0x0f << 16) /* Switch closure time */
+#define AT91_ADC_TSMR_PENDBC (0x0f << 28) /* Pen Debounce time */
+#define AT91_ADC_TSMR_PENDBC_(x) ((x) << 28)
+#define AT91_ADC_TSMR_NOTSDMA (1 << 22) /* No Touchscreen DMA */
+#define AT91_ADC_TSMR_PENDET_DIS (0 << 24) /* Pen contact detection disable */
+#define AT91_ADC_TSMR_PENDET_ENA (1 << 24) /* Pen contact detection enable */
+
+#define AT91_ADC_TSXPOSR 0xB4
+#define AT91_ADC_TSYPOSR 0xB8
+#define AT91_ADC_TSPRESSR 0xBC
+
+#define AT91_ADC_TRGR_9260 AT91_ADC_MR
+#define AT91_ADC_TRGR_9G45 0x08
+#define AT91_ADC_TRGR_9X5 0xC0
+
+/* Trigger Register bit field */
+#define AT91_ADC_TRGR_TRGPER (0xffff << 16)
+#define AT91_ADC_TRGR_TRGPER_(x) ((x) << 16)
+#define AT91_ADC_TRGR_TRGMOD (0x7 << 0)
+#define AT91_ADC_TRGR_NONE (0 << 0)
+#define AT91_ADC_TRGR_MOD_PERIOD_TRIG (5 << 0)
#define AT91_ADC_CHAN(st, ch) \
(st->registers->channel_base + (ch * 4))
@@ -46,6 +147,29 @@
#define TOUCH_SAMPLE_PERIOD_US 2000 /* 2ms */
#define TOUCH_PEN_DETECT_DEBOUNCE_US 200
+#define MAX_RLPOS_BITS 10
+#define TOUCH_SAMPLE_PERIOD_US_RL 10000 /* 10ms, the SoC can't keep up with 2ms */
+#define TOUCH_SHTIM 0xa
+
+/**
+ * struct at91_adc_reg_desc - Various informations relative to registers
+ * @channel_base: Base offset for the channel data registers
+ * @drdy_mask: Mask of the DRDY field in the relevant registers
+ (Interruptions registers mostly)
+ * @status_register: Offset of the Interrupt Status Register
+ * @trigger_register: Offset of the Trigger setup register
+ * @mr_prescal_mask: Mask of the PRESCAL field in the adc MR register
+ * @mr_startup_mask: Mask of the STARTUP field in the adc MR register
+ */
+struct at91_adc_reg_desc {
+ u8 channel_base;
+ u32 drdy_mask;
+ u8 status_register;
+ u8 trigger_register;
+ u32 mr_prescal_mask;
+ u32 mr_startup_mask;
+};
+
struct at91_adc_caps {
bool has_ts; /* Support touch screen */
bool has_tsmr; /* only at91sam9x5, sama5d3 have TSMR reg */
@@ -64,12 +188,6 @@ struct at91_adc_caps {
struct at91_adc_reg_desc registers;
};
-enum atmel_adc_ts_type {
- ATMEL_ADC_TOUCHSCREEN_NONE = 0,
- ATMEL_ADC_TOUCHSCREEN_4WIRE = 4,
- ATMEL_ADC_TOUCHSCREEN_5WIRE = 5,
-};
-
struct at91_adc_state {
struct clk *adc_clk;
u16 *buffer;
@@ -114,6 +232,11 @@ struct at91_adc_state {
u16 ts_sample_period_val;
u32 ts_pressure_threshold;
+ u16 ts_pendbc;
+
+ bool ts_bufferedmeasure;
+ u32 ts_prev_absx;
+ u32 ts_prev_absy;
};
static irqreturn_t at91_adc_trigger_handler(int irq, void *p)
@@ -220,7 +343,72 @@ static int at91_ts_sample(struct at91_adc_state *st)
return 0;
}
-static irqreturn_t at91_adc_interrupt(int irq, void *private)
+static irqreturn_t at91_adc_rl_interrupt(int irq, void *private)
+{
+ struct iio_dev *idev = private;
+ struct at91_adc_state *st = iio_priv(idev);
+ u32 status = at91_adc_readl(st, st->registers->status_register);
+ unsigned int reg;
+
+ status &= at91_adc_readl(st, AT91_ADC_IMR);
+ if (status & st->registers->drdy_mask)
+ handle_adc_eoc_trigger(irq, idev);
+
+ if (status & AT91RL_ADC_IER_PEN) {
+ /* Disabling pen debounce is required to get a NOPEN irq */
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg &= ~AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_NOPEN
+ | AT91_ADC_EOC(3));
+ /* Set up period trigger for sampling */
+ at91_adc_writel(st, st->registers->trigger_register,
+ AT91_ADC_TRGR_MOD_PERIOD_TRIG |
+ AT91_ADC_TRGR_TRGPER_(st->ts_sample_period_val));
+ } else if (status & AT91RL_ADC_IER_NOPEN) {
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+ at91_adc_writel(st, st->registers->trigger_register,
+ AT91_ADC_TRGR_NONE);
+
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_NOPEN
+ | AT91_ADC_EOC(3));
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN);
+ st->ts_bufferedmeasure = false;
+ input_report_key(st->ts_input, BTN_TOUCH, 0);
+ input_sync(st->ts_input);
+ } else if (status & AT91_ADC_EOC(3)) {
+ /* Conversion finished */
+ if (st->ts_bufferedmeasure) {
+ /*
+ * Last measurement is always discarded, since it can
+ * be erroneous.
+ * Always report previous measurement
+ */
+ input_report_abs(st->ts_input, ABS_X, st->ts_prev_absx);
+ input_report_abs(st->ts_input, ABS_Y, st->ts_prev_absy);
+ input_report_key(st->ts_input, BTN_TOUCH, 1);
+ input_sync(st->ts_input);
+ } else
+ st->ts_bufferedmeasure = true;
+
+ /* Now make new measurement */
+ st->ts_prev_absx = at91_adc_readl(st, AT91_ADC_CHAN(st, 3))
+ << MAX_RLPOS_BITS;
+ st->ts_prev_absx /= at91_adc_readl(st, AT91_ADC_CHAN(st, 2));
+
+ st->ts_prev_absy = at91_adc_readl(st, AT91_ADC_CHAN(st, 1))
+ << MAX_RLPOS_BITS;
+ st->ts_prev_absy /= at91_adc_readl(st, AT91_ADC_CHAN(st, 0));
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t at91_adc_9x5_interrupt(int irq, void *private)
{
struct iio_dev *idev = private;
struct at91_adc_state *st = iio_priv(idev);
@@ -653,6 +841,8 @@ static int at91_adc_probe_dt_ts(struct device_node *node,
return -EINVAL;
}
+ if (!st->caps->has_tsmr)
+ return 0;
prop = 0;
of_property_read_u32(node, "atmel,adc-ts-pressure-threshold", &prop);
st->ts_pressure_threshold = prop;
@@ -776,6 +966,7 @@ static int at91_adc_probe_pdata(struct at91_adc_state *st,
st->trigger_number = pdata->trigger_number;
st->trigger_list = pdata->trigger_list;
st->registers = &st->caps->registers;
+ st->touchscreen_type = pdata->touchscreen_type;
return 0;
}
@@ -790,7 +981,10 @@ static int atmel_ts_open(struct input_dev *dev)
{
struct at91_adc_state *st = input_get_drvdata(dev);
- at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+ if (st->caps->has_tsmr)
+ at91_adc_writel(st, AT91_ADC_IER, AT91_ADC_IER_PEN);
+ else
+ at91_adc_writel(st, AT91_ADC_IER, AT91RL_ADC_IER_PEN);
return 0;
}
@@ -798,45 +992,61 @@ static void atmel_ts_close(struct input_dev *dev)
{
struct at91_adc_state *st = input_get_drvdata(dev);
- at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+ if (st->caps->has_tsmr)
+ at91_adc_writel(st, AT91_ADC_IDR, AT91_ADC_IER_PEN);
+ else
+ at91_adc_writel(st, AT91_ADC_IDR, AT91RL_ADC_IER_PEN);
}
static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
{
- u32 reg = 0, pendbc;
+ u32 reg = 0;
int i = 0;
- if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
- reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
- else
- reg = AT91_ADC_TSMR_TSMODE_5WIRE;
-
/* a Pen Detect Debounce Time is necessary for the ADC Touch to avoid
* pen detect noise.
* The formula is : Pen Detect Debounce Time = (2 ^ pendbc) / ADCClock
*/
- pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz / 1000, 1);
+ st->ts_pendbc = round_up(TOUCH_PEN_DETECT_DEBOUNCE_US * adc_clk_khz /
+ 1000, 1);
- while (pendbc >> ++i)
+ while (st->ts_pendbc >> ++i)
; /* Empty! Find the shift offset */
- if (abs(pendbc - (1 << i)) < abs(pendbc - (1 << (i - 1))))
- pendbc = i;
+ if (abs(st->ts_pendbc - (1 << i)) < abs(st->ts_pendbc - (1 << (i - 1))))
+ st->ts_pendbc = i;
else
- pendbc = i - 1;
+ st->ts_pendbc = i - 1;
- if (st->caps->has_tsmr) {
- reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
- & AT91_ADC_TSMR_TSAV;
- reg |= AT91_ADC_TSMR_PENDBC_(pendbc) & AT91_ADC_TSMR_PENDBC;
- reg |= AT91_ADC_TSMR_NOTSDMA;
- reg |= AT91_ADC_TSMR_PENDET_ENA;
- reg |= 0x03 << 8; /* TSFREQ, need bigger than TSAV */
-
- at91_adc_writel(st, AT91_ADC_TSMR, reg);
- } else {
- /* TODO: for 9g45 which has no TSMR */
+ if (!st->caps->has_tsmr) {
+ reg = at91_adc_readl(st, AT91_ADC_MR);
+ reg |= AT91_ADC_TSAMOD_TS_ONLY_MODE | AT91_ADC_PENDET;
+
+ reg |= AT91_ADC_PENDBC_(st->ts_pendbc) & AT91_ADC_PENDBC;
+ at91_adc_writel(st, AT91_ADC_MR, reg);
+
+ reg = AT91_ADC_TSR_SHTIM_(TOUCH_SHTIM) & AT91_ADC_TSR_SHTIM;
+ at91_adc_writel(st, AT91_ADC_TSR, reg);
+
+ st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US_RL *
+ adc_clk_khz / 1000) - 1, 1);
+
+ return 0;
}
+ if (st->touchscreen_type == ATMEL_ADC_TOUCHSCREEN_4WIRE)
+ reg = AT91_ADC_TSMR_TSMODE_4WIRE_PRESS;
+ else
+ reg = AT91_ADC_TSMR_TSMODE_5WIRE;
+
+ reg |= AT91_ADC_TSMR_TSAV_(st->caps->ts_filter_average)
+ & AT91_ADC_TSMR_TSAV;
+ reg |= AT91_ADC_TSMR_PENDBC_(st->ts_pendbc) & AT91_ADC_TSMR_PENDBC;
+ reg |= AT91_ADC_TSMR_NOTSDMA;
+ reg |= AT91_ADC_TSMR_PENDET_ENA;
+ reg |= 0x03 << 8; /* TSFREQ, needs to be bigger than TSAV */
+
+ at91_adc_writel(st, AT91_ADC_TSMR, reg);
+
/* Change adc internal resistor value for better pen detection,
* default value is 100 kOhm.
* 0 = 200 kOhm, 1 = 150 kOhm, 2 = 100 kOhm, 3 = 50 kOhm
@@ -845,7 +1055,7 @@ static int at91_ts_hw_init(struct at91_adc_state *st, u32 adc_clk_khz)
at91_adc_writel(st, AT91_ADC_ACR, st->caps->ts_pen_detect_sensitivity
& AT91_ADC_ACR_PENDETSENS);
- /* Sample Peroid Time = (TRGPER + 1) / ADCClock */
+ /* Sample Period Time = (TRGPER + 1) / ADCClock */
st->ts_sample_period_val = round_up((TOUCH_SAMPLE_PERIOD_US *
adc_clk_khz / 1000) - 1, 1);
@@ -874,18 +1084,38 @@ static int at91_ts_register(struct at91_adc_state *st,
__set_bit(EV_ABS, input->evbit);
__set_bit(EV_KEY, input->evbit);
__set_bit(BTN_TOUCH, input->keybit);
- input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
- input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1, 0, 0);
- input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+ if (st->caps->has_tsmr) {
+ input_set_abs_params(input, ABS_X, 0, (1 << MAX_POS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, (1 << MAX_POS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_PRESSURE, 0, 0xffffff, 0, 0);
+ } else {
+ if (st->touchscreen_type != ATMEL_ADC_TOUCHSCREEN_4WIRE) {
+ dev_err(&pdev->dev,
+ "This touchscreen controller only support 4 wires\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ input_set_abs_params(input, ABS_X, 0, (1 << MAX_RLPOS_BITS) - 1,
+ 0, 0);
+ input_set_abs_params(input, ABS_Y, 0, (1 << MAX_RLPOS_BITS) - 1,
+ 0, 0);
+ }
st->ts_input = input;
input_set_drvdata(input, st);
ret = input_register_device(input);
if (ret)
- input_free_device(st->ts_input);
+ goto err;
return ret;
+
+err:
+ input_free_device(st->ts_input);
+ return ret;
}
static void at91_ts_unregister(struct at91_adc_state *st)
@@ -943,11 +1173,13 @@ static int at91_adc_probe(struct platform_device *pdev)
*/
at91_adc_writel(st, AT91_ADC_CR, AT91_ADC_SWRST);
at91_adc_writel(st, AT91_ADC_IDR, 0xFFFFFFFF);
- ret = request_irq(st->irq,
- at91_adc_interrupt,
- 0,
- pdev->dev.driver->name,
- idev);
+
+ if (st->caps->has_tsmr)
+ ret = request_irq(st->irq, at91_adc_9x5_interrupt, 0,
+ pdev->dev.driver->name, idev);
+ else
+ ret = request_irq(st->irq, at91_adc_rl_interrupt, 0,
+ pdev->dev.driver->name, idev);
if (ret) {
dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
return ret;
@@ -1051,12 +1283,6 @@ static int at91_adc_probe(struct platform_device *pdev)
goto error_disable_adc_clk;
}
} else {
- if (!st->caps->has_tsmr) {
- dev_err(&pdev->dev, "We don't support non-TSMR adc\n");
- ret = -ENODEV;
- goto error_disable_adc_clk;
- }
-
ret = at91_ts_register(st, pdev);
if (ret)
goto error_disable_adc_clk;
@@ -1120,6 +1346,20 @@ static struct at91_adc_caps at91sam9260_caps = {
},
};
+static struct at91_adc_caps at91sam9rl_caps = {
+ .has_ts = true,
+ .calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
+ .num_channels = 6,
+ .registers = {
+ .channel_base = AT91_ADC_CHR(0),
+ .drdy_mask = AT91_ADC_DRDY,
+ .status_register = AT91_ADC_SR,
+ .trigger_register = AT91_ADC_TRGR_9G45,
+ .mr_prescal_mask = AT91_ADC_PRESCAL_9260,
+ .mr_startup_mask = AT91_ADC_STARTUP_9G45,
+ },
+};
+
static struct at91_adc_caps at91sam9g45_caps = {
.has_ts = true,
.calc_startup_ticks = calc_startup_ticks_9260, /* same as 9260 */
@@ -1154,6 +1394,7 @@ static struct at91_adc_caps at91sam9x5_caps = {
static const struct of_device_id at91_adc_dt_ids[] = {
{ .compatible = "atmel,at91sam9260-adc", .data = &at91sam9260_caps },
+ { .compatible = "atmel,at91sam9rl-adc", .data = &at91sam9rl_caps },
{ .compatible = "atmel,at91sam9g45-adc", .data = &at91sam9g45_caps },
{ .compatible = "atmel,at91sam9x5-adc", .data = &at91sam9x5_caps },
{},
@@ -1165,6 +1406,9 @@ static const struct platform_device_id at91_adc_ids[] = {
.name = "at91sam9260-adc",
.driver_data = (unsigned long)&at91sam9260_caps,
}, {
+ .name = "at91sam9rl-adc",
+ .driver_data = (unsigned long)&at91sam9rl_caps,
+ }, {
.name = "at91sam9g45-adc",
.driver_data = (unsigned long)&at91sam9g45_caps,
}, {
diff --git a/drivers/iio/adc/exynos_adc.c b/drivers/iio/adc/exynos_adc.c
index d25b262193a7..010578f1d762 100644
--- a/drivers/iio/adc/exynos_adc.c
+++ b/drivers/iio/adc/exynos_adc.c
@@ -82,7 +82,7 @@ enum adc_version {
#define ADC_CON_EN_START (1u << 0)
#define ADC_DATX_MASK 0xFFF
-#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(1000))
+#define EXYNOS_ADC_TIMEOUT (msecs_to_jiffies(100))
struct exynos_adc {
void __iomem *regs;
@@ -112,6 +112,30 @@ static inline unsigned int exynos_adc_get_version(struct platform_device *pdev)
return (unsigned int)match->data;
}
+static void exynos_adc_hw_init(struct exynos_adc *info)
+{
+ u32 con1, con2;
+
+ if (info->version == ADC_V2) {
+ con1 = ADC_V2_CON1_SOFT_RESET;
+ writel(con1, ADC_V2_CON1(info->regs));
+
+ con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
+ ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
+ writel(con2, ADC_V2_CON2(info->regs));
+
+ /* Enable interrupts */
+ writel(1, ADC_V2_INT_EN(info->regs));
+ } else {
+ /* set default prescaler values and Enable prescaler */
+ con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
+
+ /* Enable 12-bit ADC resolution */
+ con1 |= ADC_V1_CON_RES;
+ writel(con1, ADC_V1_CON(info->regs));
+ }
+}
+
static int exynos_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
@@ -121,11 +145,13 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
struct exynos_adc *info = iio_priv(indio_dev);
unsigned long timeout;
u32 con1, con2;
+ int ret;
if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;
mutex_lock(&indio_dev->mlock);
+ reinit_completion(&info->completion);
/* Select the channel to be used and Trigger conversion */
if (info->version == ADC_V2) {
@@ -145,16 +171,21 @@ static int exynos_read_raw(struct iio_dev *indio_dev,
ADC_V1_CON(info->regs));
}
- timeout = wait_for_completion_interruptible_timeout
+ timeout = wait_for_completion_timeout
(&info->completion, EXYNOS_ADC_TIMEOUT);
- *val = info->value;
+ if (timeout == 0) {
+ dev_warn(&indio_dev->dev, "Conversion timed out! Resetting\n");
+ exynos_adc_hw_init(info);
+ ret = -ETIMEDOUT;
+ } else {
+ *val = info->value;
+ *val2 = 0;
+ ret = IIO_VAL_INT;
+ }
mutex_unlock(&indio_dev->mlock);
- if (timeout == 0)
- return -ETIMEDOUT;
-
- return IIO_VAL_INT;
+ return ret;
}
static irqreturn_t exynos_adc_isr(int irq, void *dev_id)
@@ -226,30 +257,6 @@ static int exynos_adc_remove_devices(struct device *dev, void *c)
return 0;
}
-static void exynos_adc_hw_init(struct exynos_adc *info)
-{
- u32 con1, con2;
-
- if (info->version == ADC_V2) {
- con1 = ADC_V2_CON1_SOFT_RESET;
- writel(con1, ADC_V2_CON1(info->regs));
-
- con2 = ADC_V2_CON2_OSEL | ADC_V2_CON2_ESEL |
- ADC_V2_CON2_HIGHF | ADC_V2_CON2_C_TIME(0);
- writel(con2, ADC_V2_CON2(info->regs));
-
- /* Enable interrupts */
- writel(1, ADC_V2_INT_EN(info->regs));
- } else {
- /* set default prescaler values and Enable prescaler */
- con1 = ADC_V1_CON_PRSCLV(49) | ADC_V1_CON_PRSCEN;
-
- /* Enable 12-bit ADC resolution */
- con1 |= ADC_V1_CON_RES;
- writel(con1, ADC_V1_CON(info->regs));
- }
-}
-
static int exynos_adc_probe(struct platform_device *pdev)
{
struct exynos_adc *info = NULL;
@@ -290,32 +297,30 @@ static int exynos_adc_probe(struct platform_device *pdev)
init_completion(&info->completion);
- ret = request_irq(info->irq, exynos_adc_isr,
- 0, dev_name(&pdev->dev), info);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
- info->irq);
- return ret;
- }
-
- writel(1, info->enable_reg);
-
info->clk = devm_clk_get(&pdev->dev, "adc");
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "failed getting clock, err = %ld\n",
PTR_ERR(info->clk));
- ret = PTR_ERR(info->clk);
- goto err_irq;
+ return PTR_ERR(info->clk);
}
info->vdd = devm_regulator_get(&pdev->dev, "vdd");
if (IS_ERR(info->vdd)) {
dev_err(&pdev->dev, "failed getting regulator, err = %ld\n",
PTR_ERR(info->vdd));
- ret = PTR_ERR(info->vdd);
- goto err_irq;
+ return PTR_ERR(info->vdd);
}
+ ret = regulator_enable(info->vdd);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ goto err_disable_reg;
+
+ writel(1, info->enable_reg);
+
info->version = exynos_adc_get_version(pdev);
platform_set_drvdata(pdev, indio_dev);
@@ -332,19 +337,21 @@ static int exynos_adc_probe(struct platform_device *pdev)
else
indio_dev->num_channels = MAX_ADC_V2_CHANNELS;
+ ret = request_irq(info->irq, exynos_adc_isr,
+ 0, dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
+ info->irq);
+ goto err_disable_clk;
+ }
+
ret = iio_device_register(indio_dev);
if (ret)
goto err_irq;
- ret = regulator_enable(info->vdd);
- if (ret)
- goto err_iio_dev;
-
- clk_prepare_enable(info->clk);
-
exynos_adc_hw_init(info);
- ret = of_platform_populate(np, exynos_adc_match, NULL, &pdev->dev);
+ ret = of_platform_populate(np, exynos_adc_match, NULL, &indio_dev->dev);
if (ret < 0) {
dev_err(&pdev->dev, "failed adding child nodes\n");
goto err_of_populate;
@@ -353,14 +360,16 @@ static int exynos_adc_probe(struct platform_device *pdev)
return 0;
err_of_populate:
- device_for_each_child(&pdev->dev, NULL,
+ device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
- regulator_disable(info->vdd);
- clk_disable_unprepare(info->clk);
-err_iio_dev:
iio_device_unregister(indio_dev);
err_irq:
free_irq(info->irq, info);
+err_disable_clk:
+ writel(0, info->enable_reg);
+ clk_disable_unprepare(info->clk);
+err_disable_reg:
+ regulator_disable(info->vdd);
return ret;
}
@@ -369,13 +378,13 @@ static int exynos_adc_remove(struct platform_device *pdev)
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct exynos_adc *info = iio_priv(indio_dev);
- device_for_each_child(&pdev->dev, NULL,
+ device_for_each_child(&indio_dev->dev, NULL,
exynos_adc_remove_devices);
- regulator_disable(info->vdd);
- clk_disable_unprepare(info->clk);
- writel(0, info->enable_reg);
iio_device_unregister(indio_dev);
free_irq(info->irq, info);
+ writel(0, info->enable_reg);
+ clk_disable_unprepare(info->clk);
+ regulator_disable(info->vdd);
return 0;
}
@@ -397,8 +406,8 @@ static int exynos_adc_suspend(struct device *dev)
writel(con, ADC_V1_CON(info->regs));
}
- clk_disable_unprepare(info->clk);
writel(0, info->enable_reg);
+ clk_disable_unprepare(info->clk);
regulator_disable(info->vdd);
return 0;
@@ -414,9 +423,11 @@ static int exynos_adc_resume(struct device *dev)
if (ret)
return ret;
- writel(1, info->enable_reg);
- clk_prepare_enable(info->clk);
+ ret = clk_prepare_enable(info->clk);
+ if (ret)
+ return ret;
+ writel(1, info->enable_reg);
exynos_adc_hw_init(info);
return 0;
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c
index 9cf3229a7272..1b3b74be5c20 100644
--- a/drivers/iio/adc/max1363.c
+++ b/drivers/iio/adc/max1363.c
@@ -1252,8 +1252,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
.info = &max1238_info,
- .channels = max1238_channels,
- .num_channels = ARRAY_SIZE(max1238_channels),
+ .channels = max1038_channels,
+ .num_channels = ARRAY_SIZE(max1038_channels),
},
[max11605] = {
.bits = 8,
@@ -1262,8 +1262,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
.info = &max1238_info,
- .channels = max1238_channels,
- .num_channels = ARRAY_SIZE(max1238_channels),
+ .channels = max1038_channels,
+ .num_channels = ARRAY_SIZE(max1038_channels),
},
[max11606] = {
.bits = 10,
@@ -1312,8 +1312,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
.info = &max1238_info,
- .channels = max1238_channels,
- .num_channels = ARRAY_SIZE(max1238_channels),
+ .channels = max1138_channels,
+ .num_channels = ARRAY_SIZE(max1138_channels),
},
[max11611] = {
.bits = 10,
@@ -1322,8 +1322,8 @@ static const struct max1363_chip_info max1363_chip_info_tbl[] = {
.num_modes = ARRAY_SIZE(max1238_mode_list),
.default_mode = s0to11,
.info = &max1238_info,
- .channels = max1238_channels,
- .num_channels = ARRAY_SIZE(max1238_channels),
+ .channels = max1138_channels,
+ .num_channels = ARRAY_SIZE(max1138_channels),
},
[max11612] = {
.bits = 12,
diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c
index 47dcb34ff44c..51672256072b 100644
--- a/drivers/iio/adc/mcp3422.c
+++ b/drivers/iio/adc/mcp3422.c
@@ -1,10 +1,11 @@
/*
- * mcp3422.c - driver for the Microchip mcp3422/3/4 chip family
+ * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family
*
* Copyright (C) 2013, Angelo Compagnucci
* Author: Angelo Compagnucci <angelo.compagnucci@gmail.com>
*
* Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf
*
* This driver exports the value of analog input voltage to sysfs, the
* voltage unit is nV.
@@ -96,6 +97,7 @@ static const int mcp3422_sign_extend[4] = {
/* Client data (each client gets its own) */
struct mcp3422 {
struct i2c_client *i2c;
+ u8 id;
u8 config;
u8 pga[4];
struct mutex lock;
@@ -238,6 +240,8 @@ static int mcp3422_write_raw(struct iio_dev *iio,
temp = MCP3422_SRATE_15;
break;
case 3:
+ if (adc->id > 4)
+ return -EINVAL;
temp = MCP3422_SRATE_3;
break;
default:
@@ -271,6 +275,17 @@ static int mcp3422_write_raw_get_fmt(struct iio_dev *indio_dev,
}
}
+static ssize_t mcp3422_show_samp_freqs(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mcp3422 *adc = iio_priv(dev_to_iio_dev(dev));
+
+ if (adc->id > 4)
+ return sprintf(buf, "240 60 15\n");
+
+ return sprintf(buf, "240 60 15 3\n");
+}
+
static ssize_t mcp3422_show_scales(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -284,12 +299,13 @@ static ssize_t mcp3422_show_scales(struct device *dev,
mcp3422_scales[sample_rate][3]);
}
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("240 60 15 3");
+static IIO_DEVICE_ATTR(sampling_frequency_available, S_IRUGO,
+ mcp3422_show_samp_freqs, NULL, 0);
static IIO_DEVICE_ATTR(in_voltage_scale_available, S_IRUGO,
mcp3422_show_scales, NULL, 0);
static struct attribute *mcp3422_attributes[] = {
- &iio_const_attr_sampling_frequency_available.dev_attr.attr,
+ &iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_voltage_scale_available.dev_attr.attr,
NULL,
};
@@ -335,6 +351,7 @@ static int mcp3422_probe(struct i2c_client *client,
adc = iio_priv(indio_dev);
adc->i2c = client;
+ adc->id = (u8)(id->driver_data);
mutex_init(&adc->lock);
@@ -343,13 +360,16 @@ static int mcp3422_probe(struct i2c_client *client,
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &mcp3422_info;
- switch ((unsigned int)(id->driver_data)) {
+ switch (adc->id) {
case 2:
case 3:
+ case 6:
+ case 7:
indio_dev->channels = mcp3422_channels;
indio_dev->num_channels = ARRAY_SIZE(mcp3422_channels);
break;
case 4:
+ case 8:
indio_dev->channels = mcp3424_channels;
indio_dev->num_channels = ARRAY_SIZE(mcp3424_channels);
break;
@@ -375,6 +395,9 @@ static const struct i2c_device_id mcp3422_id[] = {
{ "mcp3422", 2 },
{ "mcp3423", 3 },
{ "mcp3424", 4 },
+ { "mcp3426", 6 },
+ { "mcp3427", 7 },
+ { "mcp3428", 8 },
{ }
};
MODULE_DEVICE_TABLE(i2c, mcp3422_id);
@@ -399,5 +422,5 @@ static struct i2c_driver mcp3422_driver = {
module_i2c_driver(mcp3422_driver);
MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>");
-MODULE_DESCRIPTION("Microchip mcp3422/3/4 driver");
+MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver");
MODULE_LICENSE("GPL v2");
generated by cgit v1.2.3 (git 2.0.4) at 2024-10-17 01:54:15 +0000