summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/ipath/ipath_driver.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_driver.c')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_driver.c31
1 files changed, 12 insertions, 19 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index 12cefa658f3b..1aeddb48e355 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -304,7 +304,7 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
}
addr = pci_resource_start(pdev, 0);
len = pci_resource_len(pdev, 0);
- ipath_cdbg(VERBOSE, "regbase (0) %llx len %d irq %x, vend %x/%x "
+ ipath_cdbg(VERBOSE, "regbase (0) %llx len %d pdev->irq %d, vend %x/%x "
"driver_data %lx\n", addr, len, pdev->irq, ent->vendor,
ent->device, ent->driver_data);
@@ -390,12 +390,16 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
/* setup the chip-specific functions, as early as possible. */
switch (ent->device) {
+#ifdef CONFIG_HT_IRQ
case PCI_DEVICE_ID_INFINIPATH_HT:
ipath_init_iba6110_funcs(dd);
break;
+#endif
+#ifdef CONFIG_PCI_MSI
case PCI_DEVICE_ID_INFINIPATH_PE800:
ipath_init_iba6120_funcs(dd);
break;
+#endif
default:
ipath_dev_err(dd, "Found unknown QLogic deviceid 0x%x, "
"failing\n", ent->device);
@@ -467,15 +471,15 @@ static int __devinit ipath_init_one(struct pci_dev *pdev,
* check 0 irq after we return from chip-specific bus setup, since
* that can affect this due to setup
*/
- if (!pdev->irq)
+ if (!dd->ipath_irq)
ipath_dev_err(dd, "irq is 0, BIOS error? Interrupts won't "
"work\n");
else {
- ret = request_irq(pdev->irq, ipath_intr, IRQF_SHARED,
+ ret = request_irq(dd->ipath_irq, ipath_intr, IRQF_SHARED,
IPATH_DRV_NAME, dd);
if (ret) {
ipath_dev_err(dd, "Couldn't setup irq handler, "
- "irq=%u: %d\n", pdev->irq, ret);
+ "irq=%d: %d\n", dd->ipath_irq, ret);
goto bail_iounmap;
}
}
@@ -637,11 +641,10 @@ static void __devexit ipath_remove_one(struct pci_dev *pdev)
* free up port 0 (kernel) rcvhdr, egr bufs, and eventually tid bufs
* for all versions of the driver, if they were allocated
*/
- if (pdev->irq) {
- ipath_cdbg(VERBOSE,
- "unit %u free_irq of irq %x\n",
- dd->ipath_unit, pdev->irq);
- free_irq(pdev->irq, dd);
+ if (dd->ipath_irq) {
+ ipath_cdbg(VERBOSE, "unit %u free irq %d\n",
+ dd->ipath_unit, dd->ipath_irq);
+ dd->ipath_f_free_irq(dd);
} else
ipath_dbg("irq is 0, not doing free_irq "
"for unit %u\n", dd->ipath_unit);
@@ -2005,18 +2008,8 @@ static int __init infinipath_init(void)
goto bail_group;
}
- ret = ipath_diagpkt_add();
- if (ret < 0) {
- printk(KERN_ERR IPATH_DRV_NAME ": Unable to create "
- "diag data device: error %d\n", -ret);
- goto bail_ipathfs;
- }
-
goto bail;
-bail_ipathfs:
- ipath_exit_ipathfs();
-
bail_group:
ipath_driver_remove_group(&ipath_driver.driver);