diff options
Diffstat (limited to 'drivers/infiniband/hw/mthca/mthca_main.c')
-rw-r--r-- | drivers/infiniband/hw/mthca/mthca_main.c | 110 |
1 files changed, 54 insertions, 56 deletions
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 76fed7545c53..60de6f93869e 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -61,7 +61,7 @@ MODULE_PARM_DESC(debug_level, "Enable debug tracing if > 0"); #ifdef CONFIG_PCI_MSI -static int msi_x = 0; +static int msi_x = 1; module_param(msi_x, int, 0444); MODULE_PARM_DESC(msi_x, "attempt to use MSI-X if nonzero"); @@ -137,40 +137,23 @@ static const char mthca_version[] __devinitdata = static int mthca_tune_pci(struct mthca_dev *mdev) { - int cap; - u16 val; - if (!tune_pci) return 0; /* First try to max out Read Byte Count */ - cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX); - if (cap) { - if (pci_read_config_word(mdev->pdev, cap + PCI_X_CMD, &val)) { - mthca_err(mdev, "Couldn't read PCI-X command register, " - "aborting.\n"); - return -ENODEV; - } - val = (val & ~PCI_X_CMD_MAX_READ) | (3 << 2); - if (pci_write_config_word(mdev->pdev, cap + PCI_X_CMD, val)) { - mthca_err(mdev, "Couldn't write PCI-X command register, " - "aborting.\n"); + if (pci_find_capability(mdev->pdev, PCI_CAP_ID_PCIX)) { + if (pcix_set_mmrbc(mdev->pdev, pcix_get_max_mmrbc(mdev->pdev))) { + mthca_err(mdev, "Couldn't set PCI-X max read count, " + "aborting.\n"); return -ENODEV; } } else if (!(mdev->mthca_flags & MTHCA_FLAG_PCIE)) mthca_info(mdev, "No PCI-X capability, not setting RBC.\n"); - cap = pci_find_capability(mdev->pdev, PCI_CAP_ID_EXP); - if (cap) { - if (pci_read_config_word(mdev->pdev, cap + PCI_EXP_DEVCTL, &val)) { - mthca_err(mdev, "Couldn't read PCI Express device control " - "register, aborting.\n"); - return -ENODEV; - } - val = (val & ~PCI_EXP_DEVCTL_READRQ) | (5 << 12); - if (pci_write_config_word(mdev->pdev, cap + PCI_EXP_DEVCTL, val)) { - mthca_err(mdev, "Couldn't write PCI Express device control " - "register, aborting.\n"); + if (pci_find_capability(mdev->pdev, PCI_CAP_ID_EXP)) { + if (pcie_set_readrq(mdev->pdev, 4096)) { + mthca_err(mdev, "Couldn't write PCI Express read request, " + "aborting.\n"); return -ENODEV; } } else if (mdev->mthca_flags & MTHCA_FLAG_PCIE) @@ -833,14 +816,19 @@ static int mthca_setup_hca(struct mthca_dev *dev) err = mthca_NOP(dev, &status); if (err || status) { - mthca_err(dev, "NOP command failed to generate interrupt (IRQ %d), aborting.\n", - dev->mthca_flags & MTHCA_FLAG_MSI_X ? - dev->eq_table.eq[MTHCA_EQ_CMD].msi_x_vector : - dev->pdev->irq); - if (dev->mthca_flags & (MTHCA_FLAG_MSI | MTHCA_FLAG_MSI_X)) - mthca_err(dev, "Try again with MSI/MSI-X disabled.\n"); - else + if (dev->mthca_flags & (MTHCA_FLAG_MSI | MTHCA_FLAG_MSI_X)) { + mthca_warn(dev, "NOP command failed to generate interrupt " + "(IRQ %d).\n", + dev->mthca_flags & MTHCA_FLAG_MSI_X ? + dev->eq_table.eq[MTHCA_EQ_CMD].msi_x_vector : + dev->pdev->irq); + mthca_warn(dev, "Trying again with MSI/MSI-X disabled.\n"); + } else { + mthca_err(dev, "NOP command failed to generate interrupt " + "(IRQ %d), aborting.\n", + dev->pdev->irq); mthca_err(dev, "BIOS or ACPI interrupt routing problem?\n"); + } goto err_cmd_poll; } @@ -1115,24 +1103,6 @@ static int __mthca_init_one(struct pci_dev *pdev, int hca_type) goto err_free_dev; } - if (msi_x && !mthca_enable_msi_x(mdev)) - mdev->mthca_flags |= MTHCA_FLAG_MSI_X; - else if (msi) { - static int warned; - - if (!warned) { - printk(KERN_WARNING PFX "WARNING: MSI support will be " - "removed from the ib_mthca driver in January 2008.\n"); - printk(KERN_WARNING " If you are using MSI and cannot " - "switch to MSI-X, please tell " - "<general@lists.openfabrics.org>.\n"); - ++warned; - } - - if (!pci_enable_msi(pdev)) - mdev->mthca_flags |= MTHCA_FLAG_MSI; - } - if (mthca_cmd_init(mdev)) { mthca_err(mdev, "Failed to init command interface, aborting.\n"); goto err_free_dev; @@ -1156,7 +1126,35 @@ static int __mthca_init_one(struct pci_dev *pdev, int hca_type) mthca_warn(mdev, "If you have problems, try updating your HCA FW.\n"); } + if (msi_x && !mthca_enable_msi_x(mdev)) + mdev->mthca_flags |= MTHCA_FLAG_MSI_X; + else if (msi) { + static int warned; + + if (!warned) { + printk(KERN_WARNING PFX "WARNING: MSI support will be " + "removed from the ib_mthca driver in January 2008.\n"); + printk(KERN_WARNING " If you are using MSI and cannot " + "switch to MSI-X, please tell " + "<general@lists.openfabrics.org>.\n"); + ++warned; + } + + if (!pci_enable_msi(pdev)) + mdev->mthca_flags |= MTHCA_FLAG_MSI; + } + err = mthca_setup_hca(mdev); + if (err == -EBUSY && (mdev->mthca_flags & (MTHCA_FLAG_MSI | MTHCA_FLAG_MSI_X))) { + if (mdev->mthca_flags & MTHCA_FLAG_MSI_X) + pci_disable_msix(pdev); + if (mdev->mthca_flags & MTHCA_FLAG_MSI) + pci_disable_msi(pdev); + mdev->mthca_flags &= ~(MTHCA_FLAG_MSI_X | MTHCA_FLAG_MSI); + + err = mthca_setup_hca(mdev); + } + if (err) goto err_close; @@ -1192,17 +1190,17 @@ err_cleanup: mthca_cleanup_uar_table(mdev); err_close: + if (mdev->mthca_flags & MTHCA_FLAG_MSI_X) + pci_disable_msix(pdev); + if (mdev->mthca_flags & MTHCA_FLAG_MSI) + pci_disable_msi(pdev); + mthca_close_hca(mdev); err_cmd: mthca_cmd_cleanup(mdev); err_free_dev: - if (mdev->mthca_flags & MTHCA_FLAG_MSI_X) - pci_disable_msix(pdev); - if (mdev->mthca_flags & MTHCA_FLAG_MSI) - pci_disable_msi(pdev); - ib_dealloc_device(&mdev->ib_dev); err_free_res: |