diff options
Diffstat (limited to 'drivers/input/mouse/elantech.c')
| -rw-r--r-- | drivers/input/mouse/elantech.c | 48 |
1 files changed, 41 insertions, 7 deletions
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6ab0eb1ada1c..4bc78892ba91 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1,7 +1,7 @@ /* - * Elantech Touchpad driver (v5) + * Elantech Touchpad driver (v6) * - * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net> + * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; int fingers; + static int old_fingers; if (etd->fw_version_maj == 0x01) { /* byte 0: D U p1 p2 1 p3 R L @@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) fingers = (packet[0] & 0xc0) >> 6; } + if (etd->jumpy_cursor) { + /* Discard packets that are likely to have bogus coordinates */ + if (fingers > old_fingers) { + elantech_debug("elantech.c: discarding packet\n"); + goto discard_packet_v1; + } + } + input_report_key(dev, BTN_TOUCH, fingers != 0); /* byte 2: x7 x6 x5 x4 x3 x2 x1 x0 @@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse) } input_sync(dev); + + discard_packet_v1: + old_fingers = fingers; } /* @@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) rc = -1; break; } + } + + if (rc == 0) { /* - * Read back reg 0x10. The touchpad is probably initalising - * and not ready until we read back the value we just wrote. + * Read back reg 0x10. For hardware version 1 we must make + * sure the absolute mode bit is set. For hardware version 2 + * the touchpad is probably initalising and not ready until + * we read back the value we just wrote. */ do { rc = elantech_read_reg(psmouse, 0x10, &val); @@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) break; tries--; elantech_debug("elantech.c: retrying read (%d).\n", - tries); + tries); msleep(ETP_READ_BACK_DELAY); } while (tries > 0); - if (rc) + + if (rc) { pr_err("elantech.c: failed to read back register 0x10.\n"); - break; + } else if (etd->hw_version == 1 && + !(val & ETP_R10_ABSOLUTE_MODE)) { + pr_err("elantech.c: touchpad refuses " + "to switch to absolute mode.\n"); + rc = -1; + } } if (rc) @@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmouse) param[0], param[1], param[2]); etd->capabilities = param[0]; + /* + * This firmware seems to suffer from misreporting coordinates when + * a touch action starts causing the mouse cursor or scrolled page + * to jump. Enable a workaround. + */ + if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) { + pr_info("elantech.c: firmware version 2.34 detected, " + "enabling jumpy cursor workaround\n"); + etd->jumpy_cursor = 1; + } + if (elantech_set_absolute_mode(psmouse)) { pr_err("elantech.c: failed to put touchpad into absolute mode.\n"); goto init_fail; |