summaryrefslogtreecommitdiff
path: root/drivers/input/mouse
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/mouse')
-rw-r--r--drivers/input/mouse/Kconfig38
-rw-r--r--drivers/input/mouse/Makefile1
-rw-r--r--drivers/input/mouse/appletouch.c706
3 files changed, 736 insertions, 9 deletions
diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig
index 81dd8c7211a7..2ccc114b3ff6 100644
--- a/drivers/input/mouse/Kconfig
+++ b/drivers/input/mouse/Kconfig
@@ -2,7 +2,7 @@
# Mouse driver configuration
#
menuconfig INPUT_MOUSE
- bool "Mouse"
+ bool "Mice"
default y
help
Say Y here, and a list of supported mice will be displayed.
@@ -19,7 +19,7 @@ config MOUSE_PS2
select SERIO_LIBPS2
select SERIO_I8042 if X86_PC
select SERIO_GSCPS2 if GSC
- ---help---
+ help
Say Y here if you have a PS/2 mouse connected to your system. This
includes the standard 2 or 3-button PS/2 mouse, as well as PS/2
mice with wheels and extra buttons, Microsoft, Logitech or Genius
@@ -41,7 +41,7 @@ config MOUSE_PS2_ALPS
bool "ALPS PS/2 mouse protocol extension" if EMBEDDED
default y
depends on MOUSE_PS2
- ---help---
+ help
Say Y here if you have an ALPS PS/2 touchpad connected to
your system.
@@ -51,7 +51,7 @@ config MOUSE_PS2_LOGIPS2PP
bool "Logictech PS/2++ mouse protocol extension" if EMBEDDED
default y
depends on MOUSE_PS2
- ---help---
+ help
Say Y here if you have a Logictech PS/2++ mouse connected to
your system.
@@ -61,7 +61,7 @@ config MOUSE_PS2_SYNAPTICS
bool "Synaptics PS/2 mouse protocol extension" if EMBEDDED
default y
depends on MOUSE_PS2
- ---help---
+ help
Say Y here if you have a Synaptics PS/2 TouchPad connected to
your system.
@@ -71,7 +71,7 @@ config MOUSE_PS2_LIFEBOOK
bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EMBEDDED
default y
depends on MOUSE_PS2
- ---help---
+ help
Say Y here if you have a Fujitsu B-series Lifebook PS/2
TouchScreen connected to your system.
@@ -81,7 +81,7 @@ config MOUSE_PS2_TRACKPOINT
bool "IBM Trackpoint PS/2 mouse protocol extension" if EMBEDDED
default y
depends on MOUSE_PS2
- ---help---
+ help
Say Y here if you have an IBM Trackpoint PS/2 mouse connected
to your system.
@@ -90,7 +90,7 @@ config MOUSE_PS2_TRACKPOINT
config MOUSE_PS2_TOUCHKIT
bool "eGalax TouchKit PS/2 protocol extension"
depends on MOUSE_PS2
- ---help---
+ help
Say Y here if you have an eGalax TouchKit PS/2 touchscreen
connected to your system.
@@ -99,7 +99,7 @@ config MOUSE_PS2_TOUCHKIT
config MOUSE_SERIAL
tristate "Serial mouse"
select SERIO
- ---help---
+ help
Say Y here if you have a serial (RS-232, COM port) mouse connected
to your system. This includes Sun, MouseSystems, Microsoft,
Logitech and all other compatible serial mice.
@@ -109,6 +109,26 @@ config MOUSE_SERIAL
To compile this driver as a module, choose M here: the
module will be called sermouse.
+config MOUSE_APPLETOUCH
+ tristate "Apple USB Touchpad support"
+ select USB
+ help
+ Say Y here if you want to use an Apple USB Touchpad.
+
+ These are the touchpads that can be found on post-February 2005
+ Apple Powerbooks (prior models have a Synaptics touchpad connected
+ to the ADB bus).
+
+ This driver provides a basic mouse driver but can be interfaced
+ with the synaptics X11 driver to provide acceleration and
+ scrolling in X11.
+
+ For further information, see
+ <file:Documentation/input/appletouch.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called appletouch.
+
config MOUSE_INPORT
tristate "InPort/MS/ATIXL busmouse"
depends on ISA
diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile
index 6a8f622927f2..aa4ba878533f 100644
--- a/drivers/input/mouse/Makefile
+++ b/drivers/input/mouse/Makefile
@@ -5,6 +5,7 @@
# Each configuration option enables a list of files.
obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o
+obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o
obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o
obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o
obj-$(CONFIG_MOUSE_INPORT) += inport.o
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
new file mode 100644
index 000000000000..e3215267db11
--- /dev/null
+++ b/drivers/input/mouse/appletouch.c
@@ -0,0 +1,706 @@
+/*
+ * Apple USB Touchpad (for post-February 2005 PowerBooks and MacBooks) driver
+ *
+ * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
+ * Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
+ * Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
+ * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
+ * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
+ *
+ * Thanks to Alex Harper <basilisk@foobox.net> for his inputs.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/usb/input.h>
+
+/* Apple has powerbooks which have the keyboard with different Product IDs */
+#define APPLE_VENDOR_ID 0x05AC
+
+/* These names come from Info.plist in AppleUSBTrackpad.kext */
+#define FOUNTAIN_ANSI_PRODUCT_ID 0x020E
+#define FOUNTAIN_ISO_PRODUCT_ID 0x020F
+
+#define FOUNTAIN_TP_ONLY_PRODUCT_ID 0x030A
+
+#define GEYSER1_TP_ONLY_PRODUCT_ID 0x030B
+
+#define GEYSER_ANSI_PRODUCT_ID 0x0214
+#define GEYSER_ISO_PRODUCT_ID 0x0215
+#define GEYSER_JIS_PRODUCT_ID 0x0216
+
+/* MacBook devices */
+#define GEYSER3_ANSI_PRODUCT_ID 0x0217
+#define GEYSER3_ISO_PRODUCT_ID 0x0218
+#define GEYSER3_JIS_PRODUCT_ID 0x0219
+
+/*
+ * Geyser IV: same as Geyser III according to Info.plist in AppleUSBTrackpad.kext
+ * -> same IOClass (AppleUSBGrIIITrackpad), same acceleration tables
+ */
+#define GEYSER4_ANSI_PRODUCT_ID 0x021A
+#define GEYSER4_ISO_PRODUCT_ID 0x021B
+#define GEYSER4_JIS_PRODUCT_ID 0x021C
+
+#define ATP_DEVICE(prod) \
+ .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
+ USB_DEVICE_ID_MATCH_INT_CLASS | \
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
+ .idVendor = APPLE_VENDOR_ID, \
+ .idProduct = (prod), \
+ .bInterfaceClass = 0x03, \
+ .bInterfaceProtocol = 0x02
+
+/* table of devices that work with this driver */
+static struct usb_device_id atp_table [] = {
+ { ATP_DEVICE(FOUNTAIN_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(FOUNTAIN_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(FOUNTAIN_TP_ONLY_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER1_TP_ONLY_PRODUCT_ID) },
+
+ /* PowerBooks Oct 2005 */
+ { ATP_DEVICE(GEYSER_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER_JIS_PRODUCT_ID) },
+
+ /* Core Duo MacBook & MacBook Pro */
+ { ATP_DEVICE(GEYSER3_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER3_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER3_JIS_PRODUCT_ID) },
+
+ /* Core2 Duo MacBook & MacBook Pro */
+ { ATP_DEVICE(GEYSER4_ANSI_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_ISO_PRODUCT_ID) },
+ { ATP_DEVICE(GEYSER4_JIS_PRODUCT_ID) },
+
+ /* Terminating entry */
+ { }
+};
+MODULE_DEVICE_TABLE (usb, atp_table);
+
+/*
+ * number of sensors. Note that only 16 instead of 26 X (horizontal)
+ * sensors exist on 12" and 15" PowerBooks. All models have 16 Y
+ * (vertical) sensors.
+ */
+#define ATP_XSENSORS 26
+#define ATP_YSENSORS 16
+
+/* amount of fuzz this touchpad generates */
+#define ATP_FUZZ 16
+
+/* maximum pressure this driver will report */
+#define ATP_PRESSURE 300
+/*
+ * multiplication factor for the X and Y coordinates.
+ * We try to keep the touchpad aspect ratio while still doing only simple
+ * arithmetics.
+ * The factors below give coordinates like:
+ * 0 <= x < 960 on 12" and 15" Powerbooks
+ * 0 <= x < 1600 on 17" Powerbooks
+ * 0 <= y < 646
+ */
+#define ATP_XFACT 64
+#define ATP_YFACT 43
+
+/*
+ * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is
+ * ignored.
+ */
+#define ATP_THRESHOLD 5
+
+/* MacBook Pro (Geyser 3 & 4) initialization constants */
+#define ATP_GEYSER3_MODE_READ_REQUEST_ID 1
+#define ATP_GEYSER3_MODE_WRITE_REQUEST_ID 9
+#define ATP_GEYSER3_MODE_REQUEST_VALUE 0x300
+#define ATP_GEYSER3_MODE_REQUEST_INDEX 0
+#define ATP_GEYSER3_MODE_VENDOR_VALUE 0x04
+
+/* Structure to hold all of our device specific stuff */
+struct atp {
+ char phys[64];
+ struct usb_device * udev; /* usb device */
+ struct urb * urb; /* usb request block */
+ signed char * data; /* transferred data */
+ int open; /* non-zero if opened */
+ struct input_dev *input; /* input dev */
+ int valid; /* are the sensors valid ? */
+ int x_old; /* last reported x/y, */
+ int y_old; /* used for smoothing */
+ /* current value of the sensors */
+ signed char xy_cur[ATP_XSENSORS + ATP_YSENSORS];
+ /* last value of the sensors */
+ signed char xy_old[ATP_XSENSORS + ATP_YSENSORS];
+ /* accumulated sensors */
+ int xy_acc[ATP_XSENSORS + ATP_YSENSORS];
+ int overflowwarn; /* overflow warning printed? */
+ int datalen; /* size of an USB urb transfer */
+};
+
+#define dbg_dump(msg, tab) \
+ if (debug > 1) { \
+ int i; \
+ printk("appletouch: %s %lld", msg, (long long)jiffies); \
+ for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) \
+ printk(" %02x", tab[i]); \
+ printk("\n"); \
+ }
+
+#define dprintk(format, a...) \
+ do { \
+ if (debug) printk(format, ##a); \
+ } while (0)
+
+MODULE_AUTHOR("Johannes Berg, Stelian Pop, Frank Arnold, Michael Hanselmann");
+MODULE_DESCRIPTION("Apple PowerBooks USB touchpad driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Make the threshold a module parameter
+ */
+static int threshold = ATP_THRESHOLD;
+module_param(threshold, int, 0644);
+MODULE_PARM_DESC(threshold, "Discards any change in data from a sensor (trackpad has hundreds of these sensors) less than this value");
+
+static int debug = 1;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Activate debugging output");
+
+/* Checks if the device a Geyser 2 (ANSI, ISO, JIS) */
+static inline int atp_is_geyser_2(struct atp *dev)
+{
+ u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+ return (productId == GEYSER_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER_ISO_PRODUCT_ID) ||
+ (productId == GEYSER_JIS_PRODUCT_ID);
+}
+
+static inline int atp_is_geyser_3(struct atp *dev)
+{
+ u16 productId = le16_to_cpu(dev->udev->descriptor.idProduct);
+
+ return (productId == GEYSER3_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER3_ISO_PRODUCT_ID) ||
+ (productId == GEYSER3_JIS_PRODUCT_ID) ||
+ (productId == GEYSER4_ANSI_PRODUCT_ID) ||
+ (productId == GEYSER4_ISO_PRODUCT_ID) ||
+ (productId == GEYSER4_JIS_PRODUCT_ID);
+}
+
+static int atp_calculate_abs(int *xy_sensors, int nb_sensors, int fact,
+ int *z, int *fingers)
+{
+ int i;
+ /* values to calculate mean */
+ int pcum = 0, psum = 0;
+ int is_increasing = 0;
+
+ *fingers = 0;
+
+ for (i = 0; i < nb_sensors; i++) {
+ if (xy_sensors[i] < threshold) {
+ if (is_increasing)
+ is_increasing = 0;
+
+ continue;
+ }
+
+ /*
+ * Makes the finger detection more versatile. For example,
+ * two fingers with no gap will be detected. Also, my
+ * tests show it less likely to have intermittent loss
+ * of multiple finger readings while moving around (scrolling).
+ *
+ * Changes the multiple finger detection to counting humps on
+ * sensors (transitions from nonincreasing to increasing)
+ * instead of counting transitions from low sensors (no
+ * finger reading) to high sensors (finger above
+ * sensor)
+ *
+ * - Jason Parekh <jasonparekh@gmail.com>
+ */
+ if (i < 1 || (!is_increasing && xy_sensors[i - 1] < xy_sensors[i])) {
+ (*fingers)++;
+ is_increasing = 1;
+ } else if (i > 0 && xy_sensors[i - 1] >= xy_sensors[i]) {
+ is_increasing = 0;
+ }
+
+ /*
+ * Subtracts threshold so a high sensor that just passes the threshold
+ * won't skew the calculated absolute coordinate. Fixes an issue
+ * where slowly moving the mouse would occassionaly jump a number of
+ * pixels (let me restate--slowly moving the mouse makes this issue
+ * most apparent).
+ */
+ pcum += (xy_sensors[i] - threshold) * i;
+ psum += (xy_sensors[i] - threshold);
+ }
+
+ if (psum > 0) {
+ *z = psum;
+ return pcum * fact / psum;
+ }
+
+ return 0;
+}
+
+static inline void atp_report_fingers(struct input_dev *input, int fingers)
+{
+ input_report_key(input, BTN_TOOL_FINGER, fingers == 1);
+ input_report_key(input, BTN_TOOL_DOUBLETAP, fingers == 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, fingers > 2);
+}
+
+static void atp_complete(struct urb* urb)
+{
+ int x, y, x_z, y_z, x_f, y_f;
+ int retval, i, j;
+ struct atp *dev = urb->context;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -EOVERFLOW:
+ if(!dev->overflowwarn) {
+ printk("appletouch: OVERFLOW with data "
+ "length %d, actual length is %d\n",
+ dev->datalen, dev->urb->actual_length);
+ dev->overflowwarn = 1;
+ }
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* This urb is terminated, clean up */
+ dbg("%s - urb shutting down with status: %d",
+ __FUNCTION__, urb->status);
+ return;
+ default:
+ dbg("%s - nonzero urb status received: %d",
+ __FUNCTION__, urb->status);
+ goto exit;
+ }
+
+ /* drop incomplete datasets */
+ if (dev->urb->actual_length != dev->datalen) {
+ dprintk("appletouch: incomplete data package"
+ " (first byte: %d, length: %d).\n",
+ dev->data[0], dev->urb->actual_length);
+ goto exit;
+ }
+
+ /* reorder the sensors values */
+ if (atp_is_geyser_3(dev)) {
+ memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
+
+ /*
+ * The values are laid out like this:
+ * -, Y1, Y2, -, Y3, Y4, -, ..., -, X1, X2, -, X3, X4, ...
+ * '-' is an unused value.
+ */
+
+ /* read X values */
+ for (i = 0, j = 19; i < 20; i += 2, j += 3) {
+ dev->xy_cur[i] = dev->data[j + 1];
+ dev->xy_cur[i + 1] = dev->data[j + 2];
+ }
+ /* read Y values */
+ for (i = 0, j = 1; i < 9; i += 2, j += 3) {
+ dev->xy_cur[ATP_XSENSORS + i] = dev->data[j + 1];
+ dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 2];
+ }
+ } else if (atp_is_geyser_2(dev)) {
+ memset(dev->xy_cur, 0, sizeof(dev->xy_cur));
+
+ /*
+ * The values are laid out like this:
+ * Y1, Y2, -, Y3, Y4, -, ..., X1, X2, -, X3, X4, -, ...
+ * '-' is an unused value.
+ */
+
+ /* read X values */
+ for (i = 0, j = 19; i < 20; i += 2, j += 3) {
+ dev->xy_cur[i] = dev->data[j];
+ dev->xy_cur[i + 1] = dev->data[j + 1];
+ }
+
+ /* read Y values */
+ for (i = 0, j = 1; i < 9; i += 2, j += 3) {
+ dev->xy_cur[ATP_XSENSORS + i] = dev->data[j];
+ dev->xy_cur[ATP_XSENSORS + i + 1] = dev->data[j + 1];
+ }
+ } else {
+ for (i = 0; i < 8; i++) {
+ /* X values */
+ dev->xy_cur[i ] = dev->data[5 * i + 2];
+ dev->xy_cur[i + 8] = dev->data[5 * i + 4];
+ dev->xy_cur[i + 16] = dev->data[5 * i + 42];
+ if (i < 2)
+ dev->xy_cur[i + 24] = dev->data[5 * i + 44];
+
+ /* Y values */
+ dev->xy_cur[i + 26] = dev->data[5 * i + 1];
+ dev->xy_cur[i + 34] = dev->data[5 * i + 3];
+ }
+ }
+
+ dbg_dump("sample", dev->xy_cur);
+
+ if (!dev->valid) {
+ /* first sample */
+ dev->valid = 1;
+ dev->x_old = dev->y_old = -1;
+ memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
+
+ if (atp_is_geyser_3(dev)) /* No 17" Macbooks (yet) */
+ goto exit;
+
+ /* 17" Powerbooks have extra X sensors */
+ for (i = (atp_is_geyser_2(dev)?15:16); i < ATP_XSENSORS; i++) {
+ if (!dev->xy_cur[i]) continue;
+
+ printk("appletouch: 17\" model detected.\n");
+ if(atp_is_geyser_2(dev))
+ input_set_abs_params(dev->input, ABS_X, 0,
+ (20 - 1) *
+ ATP_XFACT - 1,
+ ATP_FUZZ, 0);
+ else
+ input_set_abs_params(dev->input, ABS_X, 0,
+ (ATP_XSENSORS - 1) *
+ ATP_XFACT - 1,
+ ATP_FUZZ, 0);
+
+ break;
+ }
+
+ goto exit;
+ }
+
+ for (i = 0; i < ATP_XSENSORS + ATP_YSENSORS; i++) {
+ /* accumulate the change */
+ signed char change = dev->xy_old[i] - dev->xy_cur[i];
+ dev->xy_acc[i] -= change;
+
+ /* prevent down drifting */
+ if (dev->xy_acc[i] < 0)
+ dev->xy_acc[i] = 0;
+ }
+
+ memcpy(dev->xy_old, dev->xy_cur, sizeof(dev->xy_old));
+
+ dbg_dump("accumulator", dev->xy_acc);
+
+ x = atp_calculate_abs(dev->xy_acc, ATP_XSENSORS,
+ ATP_XFACT, &x_z, &x_f);
+ y = atp_calculate_abs(dev->xy_acc + ATP_XSENSORS, ATP_YSENSORS,
+ ATP_YFACT, &y_z, &y_f);
+
+ if (x && y) {
+ if (dev->x_old != -1) {
+ x = (dev->x_old * 3 + x) >> 2;
+ y = (dev->y_old * 3 + y) >> 2;
+ dev->x_old = x;
+ dev->y_old = y;
+
+ if (debug > 1)
+ printk("appletouch: X: %3d Y: %3d "
+ "Xz: %3d Yz: %3d\n",
+ x, y, x_z, y_z);
+
+ input_report_key(dev->input, BTN_TOUCH, 1);
+ input_report_abs(dev->input, ABS_X, x);
+ input_report_abs(dev->input, ABS_Y, y);
+ input_report_abs(dev->input, ABS_PRESSURE,
+ min(ATP_PRESSURE, x_z + y_z));
+ atp_report_fingers(dev->input, max(x_f, y_f));
+ }
+ dev->x_old = x;
+ dev->y_old = y;
+ }
+ else if (!x && !y) {
+
+ dev->x_old = dev->y_old = -1;
+ input_report_key(dev->input, BTN_TOUCH, 0);
+ input_report_abs(dev->input, ABS_PRESSURE, 0);
+ atp_report_fingers(dev->input, 0);
+
+ /* reset the accumulator on release */
+ memset(dev->xy_acc, 0, sizeof(dev->xy_acc));
+ }
+
+ input_report_key(dev->input, BTN_LEFT,
+ !!dev->data[dev->datalen - 1]);
+
+ input_sync(dev->input);
+
+exit:
+ retval = usb_submit_urb(dev->urb, GFP_ATOMIC);
+ if (retval) {
+ err("%s - usb_submit_urb failed with result %d",
+ __FUNCTION__, retval);
+ }
+}
+
+static int atp_open(struct input_dev *input)
+{
+ struct atp *dev = input_get_drvdata(input);
+
+ if (usb_submit_urb(dev->urb, GFP_ATOMIC))
+ return -EIO;
+
+ dev->open = 1;
+ return 0;
+}
+
+static void atp_close(struct input_dev *input)
+{
+ struct atp *dev = input_get_drvdata(input);
+
+ usb_kill_urb(dev->urb);
+ dev->open = 0;
+}
+
+static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id)
+{
+ struct atp *dev;
+ struct input_dev *input_dev;
+ struct usb_device *udev = interface_to_usbdev(iface);
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ int int_in_endpointAddr = 0;
+ int i, error = -ENOMEM;
+
+ /* set up the endpoint information */
+ /* use only the first interrupt-in endpoint */
+ iface_desc = iface->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
+ endpoint = &iface_desc->endpoint[i].desc;
+ if (!int_in_endpointAddr && usb_endpoint_is_int_in(endpoint)) {
+ /* we found an interrupt in endpoint */
+ int_in_endpointAddr = endpoint->bEndpointAddress;
+ break;
+ }
+ }
+ if (!int_in_endpointAddr) {
+ err("Could not find int-in endpoint");
+ return -EIO;
+ }
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(struct atp), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!dev || !input_dev) {
+ err("Out of memory");
+ goto err_free_devs;
+ }
+
+ dev->udev = udev;
+ dev->input = input_dev;
+ dev->overflowwarn = 0;
+ if (atp_is_geyser_3(dev))
+ dev->datalen = 64;
+ else if (atp_is_geyser_2(dev))
+ dev->datalen = 64;
+ else
+ dev->datalen = 81;
+
+ if (atp_is_geyser_3(dev)) {
+ /*
+ * By default Geyser 3 device sends standard USB HID mouse
+ * packets (Report ID 2). This code changes device mode, so it
+ * sends raw sensor reports (Report ID 5).
+ */
+ char data[8];
+ int size;
+
+ size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+ ATP_GEYSER3_MODE_READ_REQUEST_ID,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ ATP_GEYSER3_MODE_REQUEST_VALUE,
+ ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
+
+ if (size != 8) {
+ err("Could not do mode read request from device"
+ " (Geyser 3 mode)");
+ goto err_free_devs;
+ }
+
+ /* Apply the mode switch */
+ data[0] = ATP_GEYSER3_MODE_VENDOR_VALUE;
+
+ size = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+ ATP_GEYSER3_MODE_WRITE_REQUEST_ID,
+ USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ ATP_GEYSER3_MODE_REQUEST_VALUE,
+ ATP_GEYSER3_MODE_REQUEST_INDEX, &data, 8, 5000);
+
+ if (size != 8) {
+ err("Could not do mode write request to device"
+ " (Geyser 3 mode)");
+ goto err_free_devs;
+ }
+ printk("appletouch Geyser 3 inited.\n");
+ }
+
+ dev->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dev->urb)
+ goto err_free_devs;
+
+ dev->data = usb_buffer_alloc(dev->udev, dev->datalen, GFP_KERNEL,
+ &dev->urb->transfer_dma);
+ if (!dev->data)
+ goto err_free_urb;
+
+ usb_fill_int_urb(dev->urb, udev,
+ usb_rcvintpipe(udev, int_in_endpointAddr),
+ dev->data, dev->datalen, atp_complete, dev, 1);
+
+ usb_make_path(udev, dev->phys, sizeof(dev->phys));
+ strlcat(dev->phys, "/input0", sizeof(dev->phys));
+
+ input_dev->name = "appletouch";
+ input_dev->phys = dev->phys;
+ usb_to_input_id(dev->udev, &input_dev->id);
+ input_dev->dev.parent = &iface->dev;
+
+ input_set_drvdata(input_dev, dev);
+
+ input_dev->open = atp_open;
+ input_dev->close = atp_close;
+
+ set_bit(EV_ABS, input_dev->evbit);
+
+ if (atp_is_geyser_3(dev)) {
+ /*
+ * MacBook have 20 X sensors, 10 Y sensors
+ */
+ input_set_abs_params(input_dev, ABS_X, 0,
+ ((20 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0,
+ ((10 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0);
+ } else if (atp_is_geyser_2(dev)) {
+ /*
+ * Oct 2005 15" PowerBooks have 15 X sensors, 17" are detected
+ * later.
+ */
+ input_set_abs_params(input_dev, ABS_X, 0,
+ ((15 - 1) * ATP_XFACT) - 1, ATP_FUZZ, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0,
+ ((9 - 1) * ATP_YFACT) - 1, ATP_FUZZ, 0);
+ } else {
+ /*
+ * 12" and 15" Powerbooks only have 16 x sensors,
+ * 17" models are detected later.
+ */
+ input_set_abs_params(input_dev, ABS_X, 0,
+ (16 - 1) * ATP_XFACT - 1, ATP_FUZZ, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0,
+ (ATP_YSENSORS - 1) * ATP_YFACT - 1, ATP_FUZZ, 0);
+ }
+ input_set_abs_params(input_dev, ABS_PRESSURE, 0, ATP_PRESSURE, 0, 0);
+
+ set_bit(EV_KEY, input_dev->evbit);
+ set_bit(BTN_TOUCH, input_dev->keybit);
+ set_bit(BTN_TOOL_FINGER, input_dev->keybit);
+ set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
+ set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ set_bit(BTN_LEFT, input_dev->keybit);
+
+ error = input_register_device(dev->input);
+ if (error)
+ goto err_free_buffer;
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(iface, dev);
+
+ return 0;
+
+ err_free_buffer:
+ usb_buffer_free(dev->udev, dev->datalen,
+ dev->data, dev->urb->transfer_dma);
+ err_free_urb:
+ usb_free_urb(dev->urb);
+ err_free_devs:
+ usb_set_intfdata(iface, NULL);
+ kfree(dev);
+ input_free_device(input_dev);
+ return error;
+}
+
+static void atp_disconnect(struct usb_interface *iface)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+
+ usb_set_intfdata(iface, NULL);
+ if (dev) {
+ usb_kill_urb(dev->urb);
+ input_unregister_device(dev->input);
+ usb_buffer_free(dev->udev, dev->datalen,
+ dev->data, dev->urb->transfer_dma);
+ usb_free_urb(dev->urb);
+ kfree(dev);
+ }
+ printk(KERN_INFO "input: appletouch disconnected\n");
+}
+
+static int atp_suspend(struct usb_interface *iface, pm_message_t message)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+ usb_kill_urb(dev->urb);
+ dev->valid = 0;
+ return 0;
+}
+
+static int atp_resume(struct usb_interface *iface)
+{
+ struct atp *dev = usb_get_intfdata(iface);
+ if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC))
+ return -EIO;
+
+ return 0;
+}
+
+static struct usb_driver atp_driver = {
+ .name = "appletouch",
+ .probe = atp_probe,
+ .disconnect = atp_disconnect,
+ .suspend = atp_suspend,
+ .resume = atp_resume,
+ .id_table = atp_table,
+};
+
+static int __init atp_init(void)
+{
+ return usb_register(&atp_driver);
+}
+
+static void __exit atp_exit(void)
+{
+ usb_deregister(&atp_driver);
+}
+
+module_init(atp_init);
+module_exit(atp_exit);