4 files changed, 38 insertions, 9 deletions
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index f1fd3b638a37..587398f5c9df 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -306,6 +306,11 @@ static int __init hp_sdc_mlc_init(void)
 {
 	hil_mlc *mlc = &hp_sdc_mlc;
 
+#ifdef __mc68000__
+	if (!MACH_IS_HP300)
+		return -ENODEV;
+#endif
+
 	printk(KERN_INFO PREFIX "Registering the System Domain Controller's HIL MLC.\n");
 
 	hp_sdc_mlc_priv.emtestmode = 0;
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 5ece9f56babc..9aafa96cb746 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -331,6 +331,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = {
 		},
 	},
 	{
+		.ident = "Acer TravelMate 660",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+		},
+	},
+	{
 		.ident = "Acer TravelMate 2490",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 65a74cfc187b..592ff55b62d0 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -885,6 +885,20 @@ static long i8042_panic_blink(long count)
 
 #undef DELAY
 
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+	char param = 0x90;
+	int error;
+
+	error = i8042_command(&param, 0x1059);
+	if (error)
+		printk(KERN_WARNING
+			"Failed to enable DRITEK extension: %d\n",
+			error);
+}
+#endif
+
 #ifdef CONFIG_PM
 /*
  * Here we try to restore the original BIOS settings. We only want to
@@ -942,6 +956,12 @@ static int i8042_resume(struct platform_device *dev)
 		return -EIO;
 	}
 
+
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
 	if (i8042_mux_present) {
 		if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
 			printk(KERN_WARNING
@@ -1160,6 +1180,11 @@ static int __devinit i8042_probe(struct platform_device *dev)
 	if (error)
 		return error;
 
+#ifdef CONFIG_X86
+	if (i8042_dritek)
+		i8042_dritek_enable();
+#endif
+
 	if (!i8042_noaux) {
 		error = i8042_setup_aux();
 		if (error && error != -ENODEV && error != -EBUSY)
@@ -1171,14 +1196,6 @@ static int __devinit i8042_probe(struct platform_device *dev)
 		if (error)
 			goto out_fail;
 	}
-#ifdef CONFIG_X86
-	if (i8042_dritek) {
-		char param = 0x90;
-		error = i8042_command(&param, 0x1059);
-		if (error)
-			goto out_fail;
-	}
-#endif
 /*
  * Ok, everything is ready, let's register all serio ports
  */
diff --git a/drivers/input/serio/q40kbd.c b/drivers/input/serio/q40kbd.c
index cb89aff2e160..d962a8d78b14 100644
--- a/drivers/input/serio/q40kbd.c
+++ b/drivers/input/serio/q40kbd.c
@@ -156,7 +156,7 @@ static int __init q40kbd_init(void)
 	int error;
 
 	if (!MACH_IS_Q40)
-		return -EIO;
+		return -ENODEV;
 
 	error = platform_driver_register(&q40kbd_driver);
 	if (error)