diff options
Diffstat (limited to 'drivers/input/touchscreen')
| -rw-r--r-- | drivers/input/touchscreen/ti_am335x_tsc.c | 288 |
1 files changed, 203 insertions, 85 deletions
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c index 50fb1293874e..e1c5300cacfc 100644 --- a/drivers/input/touchscreen/ti_am335x_tsc.c +++ b/drivers/input/touchscreen/ti_am335x_tsc.c @@ -24,8 +24,9 @@ #include <linux/clk.h> #include <linux/platform_device.h> #include <linux/io.h> -#include <linux/input/ti_am335x_tsc.h> #include <linux/delay.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/mfd/ti_am335x_tscadc.h> @@ -33,6 +34,13 @@ #define SEQ_SETTLE 275 #define MAX_12BIT ((1 << 12) - 1) +static const int config_pins[] = { + STEPCONFIG_XPP, + STEPCONFIG_XNN, + STEPCONFIG_YPP, + STEPCONFIG_YNN, +}; + struct titsc { struct input_dev *input; struct ti_tscadc_dev *mfd_tscadc; @@ -40,7 +48,10 @@ struct titsc { unsigned int wires; unsigned int x_plate_resistance; bool pen_down; - int steps_to_configure; + int coordinate_readouts; + u32 config_inp[4]; + u32 bit_xp, bit_xn, bit_yp, bit_yn; + u32 inp_xp, inp_xn, inp_yp, inp_yn; }; static unsigned int titsc_readl(struct titsc *ts, unsigned int reg) @@ -54,92 +65,153 @@ static void titsc_writel(struct titsc *tsc, unsigned int reg, writel(val, tsc->mfd_tscadc->tscadc_base + reg); } +static int titsc_config_wires(struct titsc *ts_dev) +{ + u32 analog_line[4]; + u32 wire_order[4]; + int i, bit_cfg; + + for (i = 0; i < 4; i++) { + /* + * Get the order in which TSC wires are attached + * w.r.t. each of the analog input lines on the EVM. + */ + analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4; + wire_order[i] = ts_dev->config_inp[i] & 0x0F; + if (WARN_ON(analog_line[i] > 7)) + return -EINVAL; + if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins))) + return -EINVAL; + } + + for (i = 0; i < 4; i++) { + int an_line; + int wi_order; + + an_line = analog_line[i]; + wi_order = wire_order[i]; + bit_cfg = config_pins[wi_order]; + if (bit_cfg == 0) + return -EINVAL; + switch (wi_order) { + case 0: + ts_dev->bit_xp = bit_cfg; + ts_dev->inp_xp = an_line; + break; + + case 1: + ts_dev->bit_xn = bit_cfg; + ts_dev->inp_xn = an_line; + break; + + case 2: + ts_dev->bit_yp = bit_cfg; + ts_dev->inp_yp = an_line; + break; + case 3: + ts_dev->bit_yn = bit_cfg; + ts_dev->inp_yn = an_line; + break; + } + } + return 0; +} + static void titsc_step_config(struct titsc *ts_dev) { unsigned int config; - int i, total_steps; - - /* Configure the Step registers */ - total_steps = 2 * ts_dev->steps_to_configure; + int i; + int end_step; + u32 stepenable; config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_XPP; + STEPCONFIG_AVG_16 | ts_dev->bit_xp; switch (ts_dev->wires) { case 4: - config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; + config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn; break; case 5: - config |= STEPCONFIG_YNN | - STEPCONFIG_INP_AN4 | STEPCONFIG_XNN | - STEPCONFIG_YPP; + config |= ts_dev->bit_yn | + STEPCONFIG_INP_AN4 | ts_dev->bit_xn | + ts_dev->bit_yp; break; case 8: - config |= STEPCONFIG_INP_AN2 | STEPCONFIG_XNN; + config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn; break; } - for (i = 1; i <= ts_dev->steps_to_configure; i++) { + /* 1 … coordinate_readouts is for X */ + end_step = ts_dev->coordinate_readouts; + for (i = 0; i < end_step; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } config = 0; config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_YNN | - STEPCONFIG_INM_ADCREFM | STEPCONFIG_FIFO1; + STEPCONFIG_AVG_16 | ts_dev->bit_yn | + STEPCONFIG_INM_ADCREFM; switch (ts_dev->wires) { case 4: - config |= STEPCONFIG_YPP; + config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp); break; case 5: - config |= STEPCONFIG_XPP | STEPCONFIG_INP_AN4 | - STEPCONFIG_XNP | STEPCONFIG_YPN; + config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 | + ts_dev->bit_xn | ts_dev->bit_yp; break; case 8: - config |= STEPCONFIG_YPP; + config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp); break; } - for (i = (ts_dev->steps_to_configure + 1); i <= total_steps; i++) { + /* coordinate_readouts … coordinate_readouts * 2 is for Y */ + end_step = ts_dev->coordinate_readouts * 2; + for (i = ts_dev->coordinate_readouts; i < end_step; i++) { titsc_writel(ts_dev, REG_STEPCONFIG(i), config); titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); } - config = 0; /* Charge step configuration */ - config = STEPCONFIG_XPP | STEPCONFIG_YNN | + config = ts_dev->bit_xp | ts_dev->bit_yn | STEPCHARGE_RFP_XPUL | STEPCHARGE_RFM_XNUR | - STEPCHARGE_INM_AN1 | STEPCHARGE_INP_AN1; + STEPCHARGE_INM_AN1 | STEPCHARGE_INP(ts_dev->inp_yp); titsc_writel(ts_dev, REG_CHARGECONFIG, config); titsc_writel(ts_dev, REG_CHARGEDELAY, CHARGEDLY_OPENDLY); - config = 0; - /* Configure to calculate pressure */ + /* coordinate_readouts * 2 … coordinate_readouts * 2 + 2 is for Z */ config = STEPCONFIG_MODE_HWSYNC | - STEPCONFIG_AVG_16 | STEPCONFIG_YPP | - STEPCONFIG_XNN | STEPCONFIG_INM_ADCREFM; - titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 1), config); - titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 1), + STEPCONFIG_AVG_16 | ts_dev->bit_yp | + ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM | + STEPCONFIG_INP(ts_dev->inp_xp); + titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config); + titsc_writel(ts_dev, REG_STEPDELAY(end_step), STEPCONFIG_OPENDLY); - config |= STEPCONFIG_INP_AN3 | STEPCONFIG_FIFO1; - titsc_writel(ts_dev, REG_STEPCONFIG(total_steps + 2), config); - titsc_writel(ts_dev, REG_STEPDELAY(total_steps + 2), + end_step++; + config |= STEPCONFIG_INP(ts_dev->inp_yn); + titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config); + titsc_writel(ts_dev, REG_STEPDELAY(end_step), STEPCONFIG_OPENDLY); - titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC); + /* The steps1 … end and bit 0 for TS_Charge */ + stepenable = (1 << (end_step + 2)) - 1; + am335x_tsc_se_set(ts_dev->mfd_tscadc, stepenable); } static void titsc_read_coordinates(struct titsc *ts_dev, - unsigned int *x, unsigned int *y) + u32 *x, u32 *y, u32 *z1, u32 *z2) { unsigned int fifocount = titsc_readl(ts_dev, REG_FIFO0CNT); unsigned int prev_val_x = ~0, prev_val_y = ~0; unsigned int prev_diff_x = ~0, prev_diff_y = ~0; unsigned int read, diff; unsigned int i, channel; + unsigned int creads = ts_dev->coordinate_readouts; + *z1 = *z2 = 0; + if (fifocount % (creads * 2 + 2)) + fifocount -= fifocount % (creads * 2 + 2); /* * Delta filter is used to remove large variations in sampled * values from ADC. The filter tries to predict where the next @@ -148,32 +220,32 @@ static void titsc_read_coordinates(struct titsc *ts_dev, * algorithm compares the difference with that of a present value, * if true the value is reported to the sub system. */ - for (i = 0; i < fifocount - 1; i++) { + for (i = 0; i < fifocount; i++) { read = titsc_readl(ts_dev, REG_FIFO0); - channel = read & 0xf0000; - channel = channel >> 0x10; - if ((channel >= 0) && (channel < ts_dev->steps_to_configure)) { - read &= 0xfff; + + channel = (read & 0xf0000) >> 16; + read &= 0xfff; + if (channel < creads) { diff = abs(read - prev_val_x); if (diff < prev_diff_x) { prev_diff_x = diff; *x = read; } prev_val_x = read; - } - read = titsc_readl(ts_dev, REG_FIFO1); - channel = read & 0xf0000; - channel = channel >> 0x10; - if ((channel >= ts_dev->steps_to_configure) && - (channel < (2 * ts_dev->steps_to_configure - 1))) { - read &= 0xfff; + } else if (channel < creads * 2) { diff = abs(read - prev_val_y); if (diff < prev_diff_y) { prev_diff_y = diff; *y = read; } prev_val_y = read; + + } else if (channel < creads * 2 + 1) { + *z1 = read; + + } else if (channel < creads * 2 + 2) { + *z2 = read; } } } @@ -186,23 +258,11 @@ static irqreturn_t titsc_irq(int irq, void *dev) unsigned int x = 0, y = 0; unsigned int z1, z2, z; unsigned int fsm; - unsigned int fifo1count, fifo0count; - int i; status = titsc_readl(ts_dev, REG_IRQSTATUS); if (status & IRQENB_FIFO0THRES) { - titsc_read_coordinates(ts_dev, &x, &y); - z1 = titsc_readl(ts_dev, REG_FIFO0) & 0xfff; - z2 = titsc_readl(ts_dev, REG_FIFO1) & 0xfff; - - fifo1count = titsc_readl(ts_dev, REG_FIFO1CNT); - for (i = 0; i < fifo1count; i++) - titsc_readl(ts_dev, REG_FIFO1); - - fifo0count = titsc_readl(ts_dev, REG_FIFO0CNT); - for (i = 0; i < fifo0count; i++) - titsc_readl(ts_dev, REG_FIFO0); + titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2); if (ts_dev->pen_down && z1 != 0 && z2 != 0) { /* @@ -210,10 +270,10 @@ static irqreturn_t titsc_irq(int irq, void *dev) * Resistance(touch) = x plate resistance * * x postion/4096 * ((z2 / z1) - 1) */ - z = z2 - z1; + z = z1 - z2; z *= x; z *= ts_dev->x_plate_resistance; - z /= z1; + z /= z2; z = (z + 2047) >> 12; if (z <= MAX_12BIT) { @@ -248,10 +308,53 @@ static irqreturn_t titsc_irq(int irq, void *dev) irqclr |= IRQENB_PENUP; } - titsc_writel(ts_dev, REG_IRQSTATUS, irqclr); + if (status & IRQENB_HW_PEN) { + + titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00); + titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN); + } - titsc_writel(ts_dev, REG_SE, STPENB_STEPENB_TC); - return IRQ_HANDLED; + if (irqclr) { + titsc_writel(ts_dev, REG_IRQSTATUS, irqclr); + am335x_tsc_se_update(ts_dev->mfd_tscadc); + return IRQ_HANDLED; + } + return IRQ_NONE; +} + +static int titsc_parse_dt(struct platform_device *pdev, + struct titsc *ts_dev) +{ + struct device_node *node = pdev->dev.of_node; + int err; + + if (!node) + return -EINVAL; + + err = of_property_read_u32(node, "ti,wires", &ts_dev->wires); + if (err < 0) + return err; + switch (ts_dev->wires) { + case 4: + case 5: + case 8: + break; + default: + return -EINVAL; + } + + err = of_property_read_u32(node, "ti,x-plate-resistance", + &ts_dev->x_plate_resistance); + if (err < 0) + return err; + + err = of_property_read_u32(node, "ti,coordiante-readouts", + &ts_dev->coordinate_readouts); + if (err < 0) + return err; + + return of_property_read_u32_array(node, "ti,wire-config", + ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp)); } /* @@ -262,17 +365,9 @@ static int titsc_probe(struct platform_device *pdev) { struct titsc *ts_dev; struct input_dev *input_dev; - struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; - struct mfd_tscadc_board *pdata; + struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev); int err; - pdata = tscadc_dev->dev->platform_data; - - if (!pdata) { - dev_err(&pdev->dev, "Could not find platform data\n"); - return -EINVAL; - } - /* Allocate memory for device */ ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL); input_dev = input_allocate_device(); @@ -286,9 +381,12 @@ static int titsc_probe(struct platform_device *pdev) ts_dev->mfd_tscadc = tscadc_dev; ts_dev->input = input_dev; ts_dev->irq = tscadc_dev->irq; - ts_dev->wires = pdata->tsc_init->wires; - ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance; - ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure; + + err = titsc_parse_dt(pdev, ts_dev); + if (err) { + dev_err(&pdev->dev, "Could not find valid DT data.\n"); + goto err_free_mem; + } err = request_irq(ts_dev->irq, titsc_irq, 0, pdev->dev.driver->name, ts_dev); @@ -298,8 +396,14 @@ static int titsc_probe(struct platform_device *pdev) } titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES); + err = titsc_config_wires(ts_dev); + if (err) { + dev_err(&pdev->dev, "wrong i/p wire configuration\n"); + goto err_free_irq; + } titsc_step_config(ts_dev); - titsc_writel(ts_dev, REG_FIFO0THR, ts_dev->steps_to_configure); + titsc_writel(ts_dev, REG_FIFO0THR, + ts_dev->coordinate_readouts * 2 + 2 - 1); input_dev->name = "ti-tsc"; input_dev->dev.parent = &pdev->dev; @@ -329,11 +433,16 @@ err_free_mem: static int titsc_remove(struct platform_device *pdev) { - struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data; - struct titsc *ts_dev = tscadc_dev->tsc; + struct titsc *ts_dev = platform_get_drvdata(pdev); + u32 steps; free_irq(ts_dev->irq, ts_dev); + /* total steps followed by the enable mask */ + steps = 2 * ts_dev->coordinate_readouts + 2; + steps = (1 << steps) - 1; + am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps); + input_unregister_device(ts_dev->input); kfree(ts_dev); @@ -343,10 +452,11 @@ static int titsc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int titsc_suspend(struct device *dev) { - struct ti_tscadc_dev *tscadc_dev = dev->platform_data; - struct titsc *ts_dev = tscadc_dev->tsc; + struct titsc *ts_dev = dev_get_drvdata(dev); + struct ti_tscadc_dev *tscadc_dev; unsigned int idle; + tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev)); if (device_may_wakeup(tscadc_dev->dev)) { idle = titsc_readl(ts_dev, REG_IRQENABLE); titsc_writel(ts_dev, REG_IRQENABLE, @@ -358,9 +468,10 @@ static int titsc_suspend(struct device *dev) static int titsc_resume(struct device *dev) { - struct ti_tscadc_dev *tscadc_dev = dev->platform_data; - struct titsc *ts_dev = tscadc_dev->tsc; + struct titsc *ts_dev = dev_get_drvdata(dev); + struct ti_tscadc_dev *tscadc_dev; + tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev)); if (device_may_wakeup(tscadc_dev->dev)) { titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00); @@ -368,7 +479,7 @@ static int titsc_resume(struct device *dev) } titsc_step_config(ts_dev); titsc_writel(ts_dev, REG_FIFO0THR, - ts_dev->steps_to_configure); + ts_dev->coordinate_readouts * 2 + 2 - 1); return 0; } @@ -381,13 +492,20 @@ static const struct dev_pm_ops titsc_pm_ops = { #define TITSC_PM_OPS NULL #endif +static const struct of_device_id ti_tsc_dt_ids[] = { + { .compatible = "ti,am3359-tsc", }, + { } +}; +MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids); + static struct platform_driver ti_tsc_driver = { .probe = titsc_probe, .remove = titsc_remove, .driver = { - .name = "tsc", + .name = "TI-am335x-tsc", .owner = THIS_MODULE, .pm = TITSC_PM_OPS, + .of_match_table = of_match_ptr(ti_tsc_dt_ids), }, }; module_platform_driver(ti_tsc_driver); |