diff options
Diffstat (limited to 'drivers/input')
28 files changed, 3051 insertions, 222 deletions
diff --git a/drivers/input/gameport/gameport.c b/drivers/input/gameport/gameport.c index ebf4be5b7c4e..2d175b5928ff 100644 --- a/drivers/input/gameport/gameport.c +++ b/drivers/input/gameport/gameport.c @@ -50,9 +50,8 @@ static LIST_HEAD(gameport_list); static struct bus_type gameport_bus; -static void gameport_add_driver(struct gameport_driver *drv); static void gameport_add_port(struct gameport *gameport); -static void gameport_destroy_port(struct gameport *gameport); +static void gameport_attach_driver(struct gameport_driver *drv); static void gameport_reconnect_port(struct gameport *gameport); static void gameport_disconnect_port(struct gameport *gameport); @@ -230,7 +229,6 @@ static void gameport_find_driver(struct gameport *gameport) enum gameport_event_type { GAMEPORT_REGISTER_PORT, - GAMEPORT_REGISTER_DRIVER, GAMEPORT_ATTACH_DRIVER, }; @@ -374,8 +372,8 @@ static void gameport_handle_event(void) gameport_add_port(event->object); break; - case GAMEPORT_REGISTER_DRIVER: - gameport_add_driver(event->object); + case GAMEPORT_ATTACH_DRIVER: + gameport_attach_driver(event->object); break; default: @@ -706,14 +704,14 @@ static int gameport_driver_remove(struct device *dev) return 0; } -static void gameport_add_driver(struct gameport_driver *drv) +static void gameport_attach_driver(struct gameport_driver *drv) { int error; - error = driver_register(&drv->driver); + error = driver_attach(&drv->driver); if (error) printk(KERN_ERR - "gameport: driver_register() failed for %s, error: %d\n", + "gameport: driver_attach() failed for %s, error: %d\n", drv->driver.name, error); } diff --git a/drivers/input/input.c b/drivers/input/input.c index ec3db3ade118..935a1835de2d 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -132,6 +132,11 @@ static void input_start_autorepeat(struct input_dev *dev, int code) } } +static void input_stop_autorepeat(struct input_dev *dev) +{ + del_timer(&dev->timer); +} + #define INPUT_IGNORE_EVENT 0 #define INPUT_PASS_TO_HANDLERS 1 #define INPUT_PASS_TO_DEVICE 2 @@ -167,6 +172,8 @@ static void input_handle_event(struct input_dev *dev, __change_bit(code, dev->key); if (value) input_start_autorepeat(dev, code); + else + input_stop_autorepeat(dev); } disposition = INPUT_PASS_TO_HANDLERS; @@ -737,11 +744,11 @@ static inline void input_wakeup_procfs_readers(void) static unsigned int input_proc_devices_poll(struct file *file, poll_table *wait) { - int state = input_devices_state; - poll_wait(file, &input_devices_poll_wait, wait); - if (state != input_devices_state) + if (file->f_version != input_devices_state) { + file->f_version = input_devices_state; return POLLIN | POLLRDNORM; + } return 0; } @@ -1542,7 +1549,6 @@ int input_register_handle(struct input_handle *handle) return error; list_add_tail_rcu(&handle->d_node, &dev->h_list); mutex_unlock(&dev->mutex); - synchronize_rcu(); /* * Since we are supposed to be called from ->connect() diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 45470f18d7e9..444dec07e5d8 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -229,7 +229,8 @@ struct atkbd { /* * System-specific ketymap fixup routine */ -static void (*atkbd_platform_fixup)(struct atkbd *); +static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); +static void *atkbd_platform_fixup_data; static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, ssize_t (*handler)(struct atkbd *, char *)); @@ -834,87 +835,64 @@ static void atkbd_disconnect(struct serio *serio) } /* - * Most special keys (Fn+F?) on Dell laptops do not generate release - * events so we have to do it ourselves. + * generate release events for the keycodes given in data */ -static void atkbd_dell_laptop_keymap_fixup(struct atkbd *atkbd) +static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd, + const void *data) { - static const unsigned int forced_release_keys[] = { - 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, - }; - int i; + const unsigned int *keys = data; + unsigned int i; if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); + for (i = 0; keys[i] != -1U; i++) + __set_bit(keys[i], atkbd->force_release_mask); } /* + * Most special keys (Fn+F?) on Dell laptops do not generate release + * events so we have to do it ourselves. + */ +static unsigned int atkbd_dell_laptop_forced_release_keys[] = { + 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U +}; + +/* * Perform fixup for HP system that doesn't generate release * for its video switch */ -static void atkbd_hp_keymap_fixup(struct atkbd *atkbd) -{ - static const unsigned int forced_release_keys[] = { - 0x94, - }; - int i; - - if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_hp_forced_release_keys[] = { + 0x94, -1U +}; /* * Inventec system with broken key release on volume keys */ -static void atkbd_inventec_keymap_fixup(struct atkbd *atkbd) -{ - const unsigned int forced_release_keys[] = { - 0xae, 0xb0, - }; - int i; - - if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_inventec_forced_release_keys[] = { + 0xae, 0xb0, -1U +}; /* * Perform fixup for HP Pavilion ZV6100 laptop that doesn't generate release * for its volume buttons */ -static void atkbd_hp_zv6100_keymap_fixup(struct atkbd *atkbd) -{ - const unsigned int forced_release_keys[] = { - 0xae, 0xb0, - }; - int i; - - if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); -} +static unsigned int atkbd_hp_zv6100_forced_release_keys[] = { + 0xae, 0xb0, -1U +}; /* - * Samsung NC10 with Fn+F? key release not working + * Samsung NC10,NC20 with Fn+F? key release not working */ -static void atkbd_samsung_keymap_fixup(struct atkbd *atkbd) -{ - const unsigned int forced_release_keys[] = { - 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, - }; - int i; +static unsigned int atkbd_samsung_forced_release_keys[] = { + 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U +}; - if (atkbd->set == 2) - for (i = 0; i < ARRAY_SIZE(forced_release_keys); i++) - __set_bit(forced_release_keys[i], - atkbd->force_release_mask); -} +/* + * The volume up and volume down special keys on a Fujitsu Amilo PA 1510 laptop + * do not generate release events so we have to do it ourselves. + */ +static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = { + 0xb0, 0xae, -1U +}; /* * atkbd_set_keycode_table() initializes keyboard's keycode table @@ -967,7 +945,7 @@ static void atkbd_set_keycode_table(struct atkbd *atkbd) * Perform additional fixups */ if (atkbd_platform_fixup) - atkbd_platform_fixup(atkbd); + atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data); } /* @@ -1492,9 +1470,11 @@ static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf) return sprintf(buf, "%lu\n", atkbd->err_count); } -static int __init atkbd_setup_fixup(const struct dmi_system_id *id) +static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) { - atkbd_platform_fixup = id->driver_data; + atkbd_platform_fixup = atkbd_apply_forced_release_keylist; + atkbd_platform_fixup_data = id->driver_data; + return 0; } @@ -1505,8 +1485,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_dell_laptop_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_dell_laptop_forced_release_keys, }, { .ident = "Dell Laptop", @@ -1514,8 +1494,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_dell_laptop_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_dell_laptop_forced_release_keys, }, { .ident = "HP 2133", @@ -1523,8 +1503,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_hp_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_forced_release_keys, }, { .ident = "HP Pavilion ZV6100", @@ -1532,8 +1512,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_hp_zv6100_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_hp_zv6100_forced_release_keys, }, { .ident = "Inventec Symphony", @@ -1541,8 +1521,8 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_inventec_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_inventec_forced_release_keys, }, { .ident = "Samsung NC10", @@ -1550,8 +1530,35 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), }, - .callback = atkbd_setup_fixup, - .driver_data = atkbd_samsung_keymap_fixup, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + .ident = "Samsung NC20", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + .ident = "Samsung SQ45S70S", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_samsung_forced_release_keys, + }, + { + .ident = "Fujitsu Amilo PA 1510", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), + }, + .callback = atkbd_setup_forced_release, + .driver_data = atkbd_amilo_pa1510_forced_release_keys, }, { } }; diff --git a/drivers/input/keyboard/bf54x-keys.c b/drivers/input/keyboard/bf54x-keys.c index ee855c5202e8..d427f322e207 100644 --- a/drivers/input/keyboard/bf54x-keys.c +++ b/drivers/input/keyboard/bf54x-keys.c @@ -211,8 +211,8 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) if (!pdata->debounce_time || pdata->debounce_time > MAX_MULT || !pdata->coldrive_time || pdata->coldrive_time > MAX_MULT) { - printk(KERN_ERR DRV_NAME - ": Invalid Debounce/Columdrive Time from pdata\n"); + printk(KERN_WARNING DRV_NAME + ": Invalid Debounce/Columndrive Time in platform data\n"); bfin_write_KPAD_MSEL(0xFF0); /* Default MSEL */ } else { bfin_write_KPAD_MSEL( @@ -252,7 +252,7 @@ static int __devinit bfin_kpad_probe(struct platform_device *pdev) } error = request_irq(bf54x_kpad->irq, bfin_kpad_isr, - IRQF_SAMPLE_RANDOM, DRV_NAME, pdev); + 0, DRV_NAME, pdev); if (error) { printk(KERN_ERR DRV_NAME ": unable to claim irq %d; error %d\n", diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c index aacf71f3cd44..e9d639ec283d 100644 --- a/drivers/input/keyboard/hilkbd.c +++ b/drivers/input/keyboard/hilkbd.c @@ -198,45 +198,28 @@ static void hil_do(unsigned char cmd, unsigned char *data, unsigned int len) } -/* initialise HIL */ -static int __init -hil_keyb_init(void) +/* initialize HIL */ +static int __devinit hil_keyb_init(void) { unsigned char c; unsigned int i, kbid; wait_queue_head_t hil_wait; int err; - if (hil_dev.dev) { + if (hil_dev.dev) return -ENODEV; /* already initialized */ - } + init_waitqueue_head(&hil_wait); spin_lock_init(&hil_dev.lock); + hil_dev.dev = input_allocate_device(); if (!hil_dev.dev) return -ENOMEM; -#if defined(CONFIG_HP300) - if (!MACH_IS_HP300) { - err = -ENODEV; - goto err1; - } - if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { - printk(KERN_ERR "HIL: hardware register was not found\n"); - err = -ENODEV; - goto err1; - } - if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { - printk(KERN_ERR "HIL: IOPORT region already used\n"); - err = -EIO; - goto err1; - } -#endif - err = request_irq(HIL_IRQ, hil_interrupt, 0, "hil", hil_dev.dev_id); if (err) { printk(KERN_ERR "HIL: Can't get IRQ\n"); - goto err2; + goto err1; } /* Turn on interrupts */ @@ -246,11 +229,9 @@ hil_keyb_init(void) hil_dev.valid = 0; /* clear any pending data */ hil_do(HIL_READKBDSADR, NULL, 0); - init_waitqueue_head(&hil_wait); - wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3*HZ); - if (!hil_dev.valid) { + wait_event_interruptible_timeout(hil_wait, hil_dev.valid, 3 * HZ); + if (!hil_dev.valid) printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n"); - } c = hil_dev.c; hil_dev.valid = 0; @@ -268,7 +249,7 @@ hil_keyb_init(void) for (i = 0; i < HIL_KEYCODES_SET1_TBLSIZE; i++) if (hphilkeyb_keycode[i] != KEY_RESERVED) - set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); + __set_bit(hphilkeyb_keycode[i], hil_dev.dev->keybit); hil_dev.dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); hil_dev.dev->ledbit[0] = BIT_MASK(LED_NUML) | BIT_MASK(LED_CAPSL) | @@ -287,34 +268,45 @@ hil_keyb_init(void) err = input_register_device(hil_dev.dev); if (err) { printk(KERN_ERR "HIL: Can't register device\n"); - goto err3; + goto err2; } + printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n", hil_dev.dev->name, kbid, HILBASE, HIL_IRQ); return 0; -err3: +err2: hil_do(HIL_INTOFF, NULL, 0); - disable_irq(HIL_IRQ); free_irq(HIL_IRQ, hil_dev.dev_id); -err2: -#if defined(CONFIG_HP300) - release_region(HILBASE + HIL_DATA, 2); err1: -#endif input_free_device(hil_dev.dev); hil_dev.dev = NULL; return err; } +static void __devexit hil_keyb_exit(void) +{ + if (HIL_IRQ) + free_irq(HIL_IRQ, hil_dev.dev_id); + + /* Turn off interrupts */ + hil_do(HIL_INTOFF, NULL, 0); + + input_unregister_device(hil_dev.dev); + hil_dev.dev = NULL; +} #if defined(CONFIG_PARISC) -static int __init -hil_init_chip(struct parisc_device *dev) +static int __devinit hil_probe_chip(struct parisc_device *dev) { + /* Only allow one HIL keyboard */ + if (hil_dev.dev) + return -ENODEV; + if (!dev->irq) { - printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%08lx\n", dev->hpa.start); + printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n", + (void *)dev->hpa.start); return -ENODEV; } @@ -327,51 +319,79 @@ hil_init_chip(struct parisc_device *dev) return hil_keyb_init(); } +static int __devexit hil_remove_chip(struct parisc_device *dev) +{ + hil_keyb_exit(); + + return 0; +} + static struct parisc_device_id hil_tbl[] = { { HPHW_FIO, HVERSION_REV_ANY_ID, HVERSION_ANY_ID, 0x00073 }, { 0, } }; +#if 0 +/* Disabled to avoid conflicts with the HP SDC HIL drivers */ MODULE_DEVICE_TABLE(parisc, hil_tbl); +#endif static struct parisc_driver hil_driver = { - .name = "hil", - .id_table = hil_tbl, - .probe = hil_init_chip, + .name = "hil", + .id_table = hil_tbl, + .probe = hil_probe_chip, + .remove = __devexit_p(hil_remove_chip), }; -#endif /* CONFIG_PARISC */ - static int __init hil_init(void) { -#if defined(CONFIG_PARISC) return register_parisc_driver(&hil_driver); -#else - return hil_keyb_init(); -#endif } - static void __exit hil_exit(void) { - if (HIL_IRQ) { - disable_irq(HIL_IRQ); - free_irq(HIL_IRQ, hil_dev.dev_id); + unregister_parisc_driver(&hil_driver); +} + +#else /* !CONFIG_PARISC */ + +static int __init hil_init(void) +{ + int error; + + /* Only allow one HIL keyboard */ + if (hil_dev.dev) + return -EBUSY; + + if (!MACH_IS_HP300) + return -ENODEV; + + if (!hwreg_present((void *)(HILBASE + HIL_DATA))) { + printk(KERN_ERR "HIL: hardware register was not found\n"); + return -ENODEV; } - /* Turn off interrupts */ - hil_do(HIL_INTOFF, NULL, 0); + if (!request_region(HILBASE + HIL_DATA, 2, "hil")) { + printk(KERN_ERR "HIL: IOPORT region already used\n"); + return -EIO; + } - input_unregister_device(hil_dev.dev); + error = hil_keyb_init(); + if (error) { + release_region(HILBASE + HIL_DATA, 2); + return error; + } - hil_dev.dev = NULL; + return 0; +} -#if defined(CONFIG_PARISC) - unregister_parisc_driver(&hil_driver); -#else - release_region(HILBASE+HIL_DATA, 2); -#endif +static void __exit hil_exit(void) +{ + hil_keyb_exit(); + release_region(HILBASE + HIL_DATA, 2); } +#endif /* CONFIG_PARISC */ + module_init(hil_init); module_exit(hil_exit); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 67e5553f699a..5c0a631d1455 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -214,7 +214,7 @@ config INPUT_SGI_BTNS config HP_SDC_RTC tristate "HP SDC Real Time Clock" - depends on GSC || HP300 + depends on (GSC || HP300) && SERIO select HP_SDC help Say Y here if you want to support the built-in real time clock @@ -227,4 +227,27 @@ config INPUT_PCF50633_PMU Say Y to include support for delivering PMU events via input layer on NXP PCF50633. +config INPUT_GPIO_ROTARY_ENCODER + tristate "Rotary encoders connected to GPIO pins" + depends on GPIOLIB && GENERIC_GPIO + help + Say Y here to add support for rotary encoders connected to GPIO lines. + Check file:Documentation/incput/rotary_encoder.txt for more + information. + + To compile this driver as a module, choose M here: the + module will be called rotary_encoder. + +config INPUT_RB532_BUTTON + tristate "Mikrotik Routerboard 532 button interface" + depends on MIKROTIK_RB532 + depends on GPIOLIB && GENERIC_GPIO + select INPUT_POLLDEV + help + Say Y here if you want support for the S1 button built into + Mikrotik's Routerboard 532. + + To compile this driver as a module, choose M here: the + module will be called rb532_button. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index bb62e6efacf3..eb3f407baedf 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -4,21 +4,23 @@ # Each configuration option enables a list of files. -obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o -obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o -obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o -obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o -obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o -obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o -obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o +obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o -obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o -obj-$(CONFIG_INPUT_POWERMATE) += powermate.o -obj-$(CONFIG_INPUT_YEALINK) += yealink.o +obj-$(CONFIG_INPUT_ATLAS_BTNS) += atlas_btns.o obj-$(CONFIG_INPUT_CM109) += cm109.o +obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o -obj-$(CONFIG_INPUT_UINPUT) += uinput.o -obj-$(CONFIG_INPUT_APANEL) += apanel.o -obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o +obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o +obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o +obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o +obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o +obj-$(CONFIG_INPUT_POWERMATE) += powermate.o +obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o +obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o +obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o +obj-$(CONFIG_INPUT_SPARCSPKR) += sparcspkr.o +obj-$(CONFIG_INPUT_UINPUT) += uinput.o +obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o +obj-$(CONFIG_INPUT_YEALINK) += yealink.o diff --git a/drivers/input/misc/ati_remote2.c b/drivers/input/misc/ati_remote2.c index 3c9988dc0e9f..922c05141585 100644 --- a/drivers/input/misc/ati_remote2.c +++ b/drivers/input/misc/ati_remote2.c @@ -31,12 +31,73 @@ MODULE_LICENSE("GPL"); * newly configured "channel". */ -static unsigned int channel_mask = 0xFFFF; -module_param(channel_mask, uint, 0644); +enum { + ATI_REMOTE2_MAX_CHANNEL_MASK = 0xFFFF, + ATI_REMOTE2_MAX_MODE_MASK = 0x1F, +}; + +static int ati_remote2_set_mask(const char *val, + struct kernel_param *kp, unsigned int max) +{ + unsigned long mask; + int ret; + + if (!val) + return -EINVAL; + + ret = strict_strtoul(val, 0, &mask); + if (ret) + return ret; + + if (mask & ~max) + return -EINVAL; + + *(unsigned int *)kp->arg = mask; + + return 0; +} + +static int ati_remote2_set_channel_mask(const char *val, + struct kernel_param *kp) +{ + pr_debug("%s()\n", __func__); + + return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_CHANNEL_MASK); +} + +static int ati_remote2_get_channel_mask(char *buffer, struct kernel_param *kp) +{ + pr_debug("%s()\n", __func__); + + return sprintf(buffer, "0x%04x", *(unsigned int *)kp->arg); +} + +static int ati_remote2_set_mode_mask(const char *val, struct kernel_param *kp) +{ + pr_debug("%s()\n", __func__); + + return ati_remote2_set_mask(val, kp, ATI_REMOTE2_MAX_MODE_MASK); +} + +static int ati_remote2_get_mode_mask(char *buffer, struct kernel_param *kp) +{ + pr_debug("%s()\n", __func__); + + return sprintf(buffer, "0x%02x", *(unsigned int *)kp->arg); +} + +static unsigned int channel_mask = ATI_REMOTE2_MAX_CHANNEL_MASK; +#define param_check_channel_mask(name, p) __param_check(name, p, unsigned int) +#define param_set_channel_mask ati_remote2_set_channel_mask +#define param_get_channel_mask ati_remote2_get_channel_mask +module_param(channel_mask, channel_mask, 0644); MODULE_PARM_DESC(channel_mask, "Bitmask of channels to accept <15:Channel16>...<1:Channel2><0:Channel1>"); -static unsigned int mode_mask = 0x1F; -module_param(mode_mask, uint, 0644); +static unsigned int mode_mask = ATI_REMOTE2_MAX_MODE_MASK; +#define param_check_mode_mask(name, p) __param_check(name, p, unsigned int) +#define param_set_mode_mask ati_remote2_set_mode_mask +#define param_get_mode_mask ati_remote2_get_mode_mask +module_param(mode_mask, mode_mask, 0644); MODULE_PARM_DESC(mode_mask, "Bitmask of modes to accept <4:PC><3:AUX4><2:AUX3><1:AUX2><0:AUX1>"); static struct usb_device_id ati_remote2_id_table[] = { @@ -133,12 +194,18 @@ struct ati_remote2 { u16 keycode[ATI_REMOTE2_MODES][ARRAY_SIZE(ati_remote2_key_table)]; unsigned int flags; + + unsigned int channel_mask; + unsigned int mode_mask; }; static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id); static void ati_remote2_disconnect(struct usb_interface *interface); static int ati_remote2_suspend(struct usb_interface *interface, pm_message_t message); static int ati_remote2_resume(struct usb_interface *interface); +static int ati_remote2_reset_resume(struct usb_interface *interface); +static int ati_remote2_pre_reset(struct usb_interface *interface); +static int ati_remote2_post_reset(struct usb_interface *interface); static struct usb_driver ati_remote2_driver = { .name = "ati_remote2", @@ -147,6 +214,9 @@ static struct usb_driver ati_remote2_driver = { .id_table = ati_remote2_id_table, .suspend = ati_remote2_suspend, .resume = ati_remote2_resume, + .reset_resume = ati_remote2_reset_resume, + .pre_reset = ati_remote2_pre_reset, + .post_reset = ati_remote2_post_reset, .supports_autosuspend = 1, }; @@ -238,7 +308,7 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2) channel = data[0] >> 4; - if (!((1 << channel) & channel_mask)) + if (!((1 << channel) & ar2->channel_mask)) return; mode = data[0] & 0x0F; @@ -250,7 +320,7 @@ static void ati_remote2_input_mouse(struct ati_remote2 *ar2) return; } - if (!((1 << mode) & mode_mask)) + if (!((1 << mode) & ar2->mode_mask)) return; input_event(idev, EV_REL, REL_X, (s8) data[1]); @@ -277,7 +347,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) channel = data[0] >> 4; - if (!((1 << channel) & channel_mask)) + if (!((1 << channel) & ar2->channel_mask)) return; mode = data[0] & 0x0F; @@ -305,7 +375,7 @@ static void ati_remote2_input_key(struct ati_remote2 *ar2) ar2->mode = mode; } - if (!((1 << mode) & mode_mask)) + if (!((1 << mode) & ar2->mode_mask)) return; index = ati_remote2_lookup(hw_code); @@ -410,7 +480,7 @@ static int ati_remote2_getkeycode(struct input_dev *idev, int index, mode; mode = scancode >> 8; - if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask)) + if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask)) return -EINVAL; index = ati_remote2_lookup(scancode & 0xFF); @@ -427,7 +497,7 @@ static int ati_remote2_setkeycode(struct input_dev *idev, int scancode, int keyc int index, mode, old_keycode; mode = scancode >> 8; - if (mode > ATI_REMOTE2_PC || !((1 << mode) & mode_mask)) + if (mode > ATI_REMOTE2_PC || !((1 << mode) & ar2->mode_mask)) return -EINVAL; index = ati_remote2_lookup(scancode & 0xFF); @@ -550,7 +620,7 @@ static void ati_remote2_urb_cleanup(struct ati_remote2 *ar2) } } -static int ati_remote2_setup(struct ati_remote2 *ar2) +static int ati_remote2_setup(struct ati_remote2 *ar2, unsigned int ch_mask) { int r, i, channel; @@ -565,8 +635,8 @@ static int ati_remote2_setup(struct ati_remote2 *ar2) channel = 0; for (i = 0; i < 16; i++) { - if ((1 << i) & channel_mask) { - if (!(~(1 << i) & 0xFFFF & channel_mask)) + if ((1 << i) & ch_mask) { + if (!(~(1 << i) & ch_mask)) channel = i + 1; break; } @@ -585,6 +655,99 @@ static int ati_remote2_setup(struct ati_remote2 *ar2) return 0; } +static ssize_t ati_remote2_show_channel_mask(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_interface *intf = usb_ifnum_to_if(udev, 0); + struct ati_remote2 *ar2 = usb_get_intfdata(intf); + + return sprintf(buf, "0x%04x\n", ar2->channel_mask); +} + +static ssize_t ati_remote2_store_channel_mask(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_interface *intf = usb_ifnum_to_if(udev, 0); + struct ati_remote2 *ar2 = usb_get_intfdata(intf); + unsigned long mask; + int r; + + if (strict_strtoul(buf, 0, &mask)) + return -EINVAL; + + if (mask & ~ATI_REMOTE2_MAX_CHANNEL_MASK) + return -EINVAL; + + r = usb_autopm_get_interface(ar2->intf[0]); + if (r) { + dev_err(&ar2->intf[0]->dev, + "%s(): usb_autopm_get_interface() = %d\n", __func__, r); + return r; + } + + mutex_lock(&ati_remote2_mutex); + + if (mask != ar2->channel_mask && !ati_remote2_setup(ar2, mask)) + ar2->channel_mask = mask; + + mutex_unlock(&ati_remote2_mutex); + + usb_autopm_put_interface(ar2->intf[0]); + + return count; +} + +static ssize_t ati_remote2_show_mode_mask(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_interface *intf = usb_ifnum_to_if(udev, 0); + struct ati_remote2 *ar2 = usb_get_intfdata(intf); + + return sprintf(buf, "0x%02x\n", ar2->mode_mask); +} + +static ssize_t ati_remote2_store_mode_mask(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct usb_device *udev = to_usb_device(dev); + struct usb_interface *intf = usb_ifnum_to_if(udev, 0); + struct ati_remote2 *ar2 = usb_get_intfdata(intf); + unsigned long mask; + + if (strict_strtoul(buf, 0, &mask)) + return -EINVAL; + + if (mask & ~ATI_REMOTE2_MAX_MODE_MASK) + return -EINVAL; + + ar2->mode_mask = mask; + + return count; +} + +static DEVICE_ATTR(channel_mask, 0644, ati_remote2_show_channel_mask, + ati_remote2_store_channel_mask); + +static DEVICE_ATTR(mode_mask, 0644, ati_remote2_show_mode_mask, + ati_remote2_store_mode_mask); + +static struct attribute *ati_remote2_attrs[] = { + &dev_attr_channel_mask.attr, + &dev_attr_mode_mask.attr, + NULL, +}; + +static struct attribute_group ati_remote2_attr_group = { + .attrs = ati_remote2_attrs, +}; + static int ati_remote2_probe(struct usb_interface *interface, const struct usb_device_id *id) { struct usb_device *udev = interface_to_usbdev(interface); @@ -615,7 +778,10 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d if (r) goto fail2; - r = ati_remote2_setup(ar2); + ar2->channel_mask = channel_mask; + ar2->mode_mask = mode_mask; + + r = ati_remote2_setup(ar2, ar2->channel_mask); if (r) goto fail2; @@ -624,19 +790,24 @@ static int ati_remote2_probe(struct usb_interface *interface, const struct usb_d strlcat(ar2->name, "ATI Remote Wonder II", sizeof(ar2->name)); - r = ati_remote2_input_init(ar2); + r = sysfs_create_group(&udev->dev.kobj, &ati_remote2_attr_group); if (r) goto fail2; + r = ati_remote2_input_init(ar2); + if (r) + goto fail3; + usb_set_intfdata(interface, ar2); interface->needs_remote_wakeup = 1; return 0; + fail3: + sysfs_remove_group(&udev->dev.kobj, &ati_remote2_attr_group); fail2: ati_remote2_urb_cleanup(ar2); - usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); fail1: kfree(ar2); @@ -657,6 +828,8 @@ static void ati_remote2_disconnect(struct usb_interface *interface) input_unregister_device(ar2->idev); + sysfs_remove_group(&ar2->udev->dev.kobj, &ati_remote2_attr_group); + ati_remote2_urb_cleanup(ar2); usb_driver_release_interface(&ati_remote2_driver, ar2->intf[1]); @@ -715,6 +888,78 @@ static int ati_remote2_resume(struct usb_interface *interface) return r; } +static int ati_remote2_reset_resume(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + int r = 0; + + if (alt->desc.bInterfaceNumber) + return 0; + + ar2 = usb_get_intfdata(interface); + + dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); + + mutex_lock(&ati_remote2_mutex); + + r = ati_remote2_setup(ar2, ar2->channel_mask); + if (r) + goto out; + + if (ar2->flags & ATI_REMOTE2_OPENED) + r = ati_remote2_submit_urbs(ar2); + + if (!r) + ar2->flags &= ~ATI_REMOTE2_SUSPENDED; + + out: + mutex_unlock(&ati_remote2_mutex); + + return r; +} + +static int ati_remote2_pre_reset(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + + if (alt->desc.bInterfaceNumber) + return 0; + + ar2 = usb_get_intfdata(interface); + + dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); + + mutex_lock(&ati_remote2_mutex); + + if (ar2->flags == ATI_REMOTE2_OPENED) + ati_remote2_kill_urbs(ar2); + + return 0; +} + +static int ati_remote2_post_reset(struct usb_interface *interface) +{ + struct ati_remote2 *ar2; + struct usb_host_interface *alt = interface->cur_altsetting; + int r = 0; + + if (alt->desc.bInterfaceNumber) + return 0; + + ar2 = usb_get_intfdata(interface); + + dev_dbg(&ar2->intf[0]->dev, "%s()\n", __func__); + + if (ar2->flags == ATI_REMOTE2_OPENED) + r = ati_remote2_submit_urbs(ar2); + + mutex_unlock(&ati_remote2_mutex); + + return r; +} + static int __init ati_remote2_init(void) { int r; diff --git a/drivers/input/misc/rb532_button.c b/drivers/input/misc/rb532_button.c new file mode 100644 index 000000000000..e2c7f622a0b5 --- /dev/null +++ b/drivers/input/misc/rb532_button.c @@ -0,0 +1,120 @@ +/* + * Support for the S1 button on Routerboard 532 + * + * Copyright (C) 2009 Phil Sutter <n0-1@freewrt.org> + */ + +#include <linux/input-polldev.h> +#include <linux/module.h> +#include <linux/platform_device.h> + +#include <asm/mach-rc32434/gpio.h> +#include <asm/mach-rc32434/rb.h> + +#define DRV_NAME "rb532-button" + +#define RB532_BTN_RATE 100 /* msec */ +#define RB532_BTN_KSYM BTN_0 + +/* The S1 button state is provided by GPIO pin 1. But as this + * pin is also used for uart input as alternate function, the + * operational modes must be switched first: + * 1) disable uart using set_latch_u5() + * 2) turn off alternate function implicitly through + * gpio_direction_input() + * 3) read the GPIO's current value + * 4) undo step 2 by enabling alternate function (in this + * mode the GPIO direction is fixed, so no change needed) + * 5) turn on uart again + * The GPIO value occurs to be inverted, so pin high means + * button is not pressed. + */ +static bool rb532_button_pressed(void) +{ + int val; + + set_latch_u5(0, LO_FOFF); + gpio_direction_input(GPIO_BTN_S1); + + val = gpio_get_value(GPIO_BTN_S1); + + rb532_gpio_set_func(GPIO_BTN_S1); + set_latch_u5(LO_FOFF, 0); + + return !val; +} + +static void rb532_button_poll(struct input_polled_dev *poll_dev) +{ + input_report_key(poll_dev->input, RB532_BTN_KSYM, + rb532_button_pressed()); + input_sync(poll_dev->input); +} + +static int __devinit rb532_button_probe(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev; + int error; + + poll_dev = input_allocate_polled_device(); + if (!poll_dev) + return -ENOMEM; + + poll_dev->poll = rb532_button_poll; + poll_dev->poll_interval = RB532_BTN_RATE; + + poll_dev->input->name = "rb532 button"; + poll_dev->input->phys = "rb532/button0"; + poll_dev->input->id.bustype = BUS_HOST; + poll_dev->input->dev.parent = &pdev->dev; + + dev_set_drvdata(&pdev->dev, poll_dev); + + input_set_capability(poll_dev->input, EV_KEY, RB532_BTN_KSYM); + + error = input_register_polled_device(poll_dev); + if (error) { + input_free_polled_device(poll_dev); + return error; + } + + return 0; +} + +static int __devexit rb532_button_remove(struct platform_device *pdev) +{ + struct input_polled_dev *poll_dev = dev_get_drvdata(&pdev->dev); + + input_unregister_polled_device(poll_dev); + input_free_polled_device(poll_dev); + dev_set_drvdata(&pdev->dev, NULL); + + return 0; +} + +static struct platform_driver rb532_button_driver = { + .probe = rb532_button_probe, + .remove = __devexit_p(rb532_button_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init rb532_button_init(void) +{ + return platform_driver_register(&rb532_button_driver); +} + +static void __exit rb532_button_exit(void) +{ + platform_driver_unregister(&rb532_button_driver); +} + +module_init(rb532_button_init); +module_exit(rb532_button_exit); + +MODULE_AUTHOR("Phil Sutter <n0-1@freewrt.org>"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Support for S1 button on Routerboard 532"); +MODULE_ALIAS("platform:" DRV_NAME); diff --git a/drivers/input/misc/rotary_encoder.c b/drivers/input/misc/rotary_encoder.c new file mode 100644 index 000000000000..5bb3ab51b8c6 --- /dev/null +++ b/drivers/input/misc/rotary_encoder.c @@ -0,0 +1,221 @@ +/* + * rotary_encoder.c + * + * (c) 2009 Daniel Mack <daniel@caiaq.de> + * + * state machine code inspired by code from Tim Ruetz + * + * A generic driver for rotary encoders connected to GPIO lines. + * See file:Documentation/input/rotary_encoder.txt for more information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/rotary_encoder.h> + +#define DRV_NAME "rotary-encoder" + +struct rotary_encoder { + unsigned int irq_a; + unsigned int irq_b; + unsigned int pos; + unsigned int armed; + unsigned int dir; + struct input_dev *input; + struct rotary_encoder_platform_data *pdata; +}; + +static irqreturn_t rotary_encoder_irq(int irq, void *dev_id) +{ + struct rotary_encoder *encoder = dev_id; + struct rotary_encoder_platform_data *pdata = encoder->pdata; + int a = !!gpio_get_value(pdata->gpio_a); + int b = !!gpio_get_value(pdata->gpio_b); + int state; + + a ^= pdata->inverted_a; + b ^= pdata->inverted_b; + state = (a << 1) | b; + + switch (state) { + + case 0x0: + if (!encoder->armed) + break; + + if (encoder->dir) { + /* turning counter-clockwise */ + encoder->pos += pdata->steps; + encoder->pos--; + encoder->pos %= pdata->steps; + } else { + /* turning clockwise */ + encoder->pos++; + encoder->pos %= pdata->steps; + } + + input_report_abs(encoder->input, pdata->axis, encoder->pos); + input_sync(encoder->input); + + encoder->armed = 0; + break; + + case 0x1: + case 0x2: + if (encoder->armed) + encoder->dir = state - 1; + break; + + case 0x3: + encoder->armed = 1; + break; + } + + return IRQ_HANDLED; +} + +static int __devinit rotary_encoder_probe(struct platform_device *pdev) +{ + struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data; + struct rotary_encoder *encoder; + struct input_dev *input; + int err; + + if (!pdata || !pdata->steps) { + dev_err(&pdev->dev, "invalid platform data\n"); + return -ENOENT; + } + + encoder = kzalloc(sizeof(struct rotary_encoder), GFP_KERNEL); + input = input_allocate_device(); + if (!encoder || !input) { + dev_err(&pdev->dev, "failed to allocate memory for device\n"); + err = -ENOMEM; + goto exit_free_mem; + } + + encoder->input = input; + encoder->pdata = pdata; + encoder->irq_a = gpio_to_irq(pdata->gpio_a); + encoder->irq_b = gpio_to_irq(pdata->gpio_b); + + /* create and register the input driver */ + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->dev.parent = &pdev->dev; + input->evbit[0] = BIT_MASK(EV_ABS); + input_set_abs_params(encoder->input, + pdata->axis, 0, pdata->steps, 0, 1); + + err = input_register_device(input); + if (err) { + dev_err(&pdev->dev, "failed to register input device\n"); + goto exit_free_mem; + } + + /* request the GPIOs */ + err = gpio_request(pdata->gpio_a, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "unable to request GPIO %d\n", + pdata->gpio_a); + goto exit_unregister_input; + } + + err = gpio_request(pdata->gpio_b, DRV_NAME); + if (err) { + dev_err(&pdev->dev, "unable to request GPIO %d\n", + pdata->gpio_b); + goto exit_free_gpio_a; + } + + /* request the IRQs */ + err = request_irq(encoder->irq_a, &rotary_encoder_irq, + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, + DRV_NAME, encoder); + if (err) { + dev_err(&pdev->dev, "unable to request IRQ %d\n", + encoder->irq_a); + goto exit_free_gpio_b; + } + + err = request_irq(encoder->irq_b, &rotary_encoder_irq, + IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, + DRV_NAME, encoder); + if (err) { + dev_err(&pdev->dev, "unable to request IRQ %d\n", + encoder->irq_b); + goto exit_free_irq_a; + } + + platform_set_drvdata(pdev, encoder); + + return 0; + +exit_free_irq_a: + free_irq(encoder->irq_a, encoder); +exit_free_gpio_b: + gpio_free(pdata->gpio_b); +exit_free_gpio_a: + gpio_free(pdata->gpio_a); +exit_unregister_input: + input_unregister_device(input); + input = NULL; /* so we don't try to free it */ +exit_free_mem: + input_free_device(input); + kfree(encoder); + return err; +} + +static int __devexit rotary_encoder_remove(struct platform_device *pdev) +{ + struct rotary_encoder *encoder = platform_get_drvdata(pdev); + struct rotary_encoder_platform_data *pdata = pdev->dev.platform_data; + + free_irq(encoder->irq_a, encoder); + free_irq(encoder->irq_b, encoder); + gpio_free(pdata->gpio_a); + gpio_free(pdata->gpio_b); + input_unregister_device(encoder->input); + platform_set_drvdata(pdev, NULL); + kfree(encoder); + + return 0; +} + +static struct platform_driver rotary_encoder_driver = { + .probe = rotary_encoder_probe, + .remove = __devexit_p(rotary_encoder_remove), + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + } +}; + +static int __init rotary_encoder_init(void) +{ + return platform_driver_register(&rotary_encoder_driver); +} + +static void __exit rotary_encoder_exit(void) +{ + platform_driver_unregister(&rotary_encoder_driver); +} + +module_init(rotary_encoder_init); +module_exit(rotary_encoder_exit); + +MODULE_ALIAS("platform:" DRV_NAME); +MODULE_DESCRIPTION("GPIO rotary encoder driver"); +MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 4f38e6f7dfdd..c66cc3d08c2f 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -292,4 +292,15 @@ config MOUSE_PXA930_TRKBALL help Say Y here to support PXA930 Trackball mouse. +config MOUSE_MAPLE + tristate "Maple mouse (for the Dreamcast)" + depends on MAPLE + help + This driver supports the Maple mouse on the SEGA Dreamcast. + + Most Dreamcast users, who have a mouse, will say Y here. + + To compile this driver as a module choose M here: the module will be + called maplemouse. + endif diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 8c8a1f236e28..472189468d67 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -6,18 +6,19 @@ obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o -obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o -obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o +obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o +obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o +obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o obj-$(CONFIG_MOUSE_INPORT) += inport.o obj-$(CONFIG_MOUSE_LOGIBM) += logibm.o +obj-$(CONFIG_MOUSE_MAPLE) += maplemouse.o obj-$(CONFIG_MOUSE_PC110PAD) += pc110pad.o obj-$(CONFIG_MOUSE_PS2) += psmouse.o obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o +obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o -obj-$(CONFIG_MOUSE_HIL) += hil_ptr.o obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o -obj-$(CONFIG_MOUSE_GPIO) += gpio_mouse.o psmouse-objs := psmouse-base.o synaptics.o diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index 55cd0fa68339..a1ad2f1a7bb3 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -472,7 +472,7 @@ static enum hgpk_model_t hgpk_get_model(struct psmouse *psmouse) return -EIO; } - hgpk_dbg(psmouse, "ID: %02x %02x %02x", param[0], param[1], param[2]); + hgpk_dbg(psmouse, "ID: %02x %02x %02x\n", param[0], param[1], param[2]); /* HGPK signature: 0x67, 0x00, 0x<model> */ if (param[0] != 0x67 || param[1] != 0x00) diff --git a/drivers/input/mouse/maplemouse.c b/drivers/input/mouse/maplemouse.c new file mode 100644 index 000000000000..5f278176eb9b --- /dev/null +++ b/drivers/input/mouse/maplemouse.c @@ -0,0 +1,150 @@ +/* + * SEGA Dreamcast mouse driver + * Based on drivers/usb/usbmouse.c + * + * Copyright (c) Yaegashi Takeshi, 2001 + * Copyright (c) Adrian McMenamin, 2008 - 2009 + */ + +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/timer.h> +#include <linux/maple.h> + +MODULE_AUTHOR("Adrian McMenamin <adrian@mcmen.demon.co.uk>"); +MODULE_DESCRIPTION("SEGA Dreamcast mouse driver"); +MODULE_LICENSE("GPL"); + +struct dc_mouse { + struct input_dev *dev; + struct maple_device *mdev; +}; + +static void dc_mouse_callback(struct mapleq *mq) +{ + int buttons, relx, rely, relz; + struct maple_device *mapledev = mq->dev; + struct dc_mouse *mse = maple_get_drvdata(mapledev); + struct input_dev *dev = mse->dev; + unsigned char *res = mq->recvbuf->buf; + + buttons = ~res[8]; + relx = *(unsigned short *)(res + 12) - 512; + rely = *(unsigned short *)(res + 14) - 512; + relz = *(unsigned short *)(res + 16) - 512; + + input_report_key(dev, BTN_LEFT, buttons & 4); + input_report_key(dev, BTN_MIDDLE, buttons & 9); + input_report_key(dev, BTN_RIGHT, buttons & 2); + input_report_rel(dev, REL_X, relx); + input_report_rel(dev, REL_Y, rely); + input_report_rel(dev, REL_WHEEL, relz); + input_sync(dev); +} + +static int dc_mouse_open(struct input_dev *dev) +{ + struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev)); + + maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50, + MAPLE_FUNC_MOUSE); + + return 0; +} + +static void dc_mouse_close(struct input_dev *dev) +{ + struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev)); + + maple_getcond_callback(mse->mdev, dc_mouse_callback, 0, + MAPLE_FUNC_MOUSE); +} + +/* allow the mouse to be used */ +static int __devinit probe_maple_mouse(struct device *dev) +{ + struct maple_device *mdev = to_maple_dev(dev); + struct maple_driver *mdrv = to_maple_driver(dev->driver); + int error; + struct input_dev *input_dev; + struct dc_mouse *mse; + + mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL); + if (!mse) { + error = -ENOMEM; + goto fail; + } + + input_dev = input_allocate_device(); + if (!input_dev) { + error = -ENOMEM; + goto fail_nomem; + } + + mse->dev = input_dev; + mse->mdev = mdev; + + input_set_drvdata(input_dev, mse); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); + input_dev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | + BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE); + input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) | + BIT_MASK(REL_WHEEL); + input_dev->open = dc_mouse_open; + input_dev->close = dc_mouse_close; + input_dev->name = mdev->product_name; + input_dev->id.bustype = BUS_HOST; + error = input_register_device(input_dev); + if (error) + goto fail_register; + + mdev->driver = mdrv; + maple_set_drvdata(mdev, mse); + + return error; + +fail_register: + input_free_device(input_dev); +fail_nomem: + kfree(mse); +fail: + return error; +} + +static int __devexit remove_maple_mouse(struct device *dev) +{ + struct maple_device *mdev = to_maple_dev(dev); + struct dc_mouse *mse = maple_get_drvdata(mdev); + + mdev->callback = NULL; + input_unregister_device(mse->dev); + maple_set_drvdata(mdev, NULL); + kfree(mse); + + return 0; +} + +static struct maple_driver dc_mouse_driver = { + .function = MAPLE_FUNC_MOUSE, + .drv = { + .name = "Dreamcast_mouse", + .probe = probe_maple_mouse, + .remove = __devexit_p(remove_maple_mouse), + }, +}; + +static int __init dc_mouse_init(void) +{ + return maple_driver_register(&dc_mouse_driver); +} + +static void __exit dc_mouse_exit(void) +{ + maple_driver_unregister(&dc_mouse_driver); +} + +module_init(dc_mouse_init); +module_exit(dc_mouse_exit); diff --git a/drivers/input/mouse/pc110pad.c b/drivers/input/mouse/pc110pad.c index fd09c8df81f2..3941f97cfa60 100644 --- a/drivers/input/mouse/pc110pad.c +++ b/drivers/input/mouse/pc110pad.c @@ -108,14 +108,10 @@ static int pc110pad_open(struct input_dev *dev) */ static int __init pc110pad_init(void) { - struct pci_dev *dev; int err; - dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); - if (dev) { - pci_dev_put(dev); + if (!no_pci_devices()) return -ENODEV; - } if (!request_region(pc110pad_io, 4, "pc110pad")) { printk(KERN_ERR "pc110pad: I/O area %#x-%#x in use.\n", diff --git a/drivers/input/serio/hp_sdc.c b/drivers/input/serio/hp_sdc.c index bfe49243f38b..1c9410d1822c 100644 --- a/drivers/input/serio/hp_sdc.c +++ b/drivers/input/serio/hp_sdc.c @@ -819,6 +819,7 @@ static const struct parisc_device_id hp_sdc_tbl[] = { MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl); static int __init hp_sdc_init_hppa(struct parisc_device *d); +static struct delayed_work moduleloader_work; static struct parisc_driver hp_sdc_driver = { .name = "hp_sdc", @@ -930,8 +931,15 @@ static int __init hp_sdc_init(void) #if defined(__hppa__) +static void request_module_delayed(struct work_struct *work) +{ + request_module("hp_sdc_mlc"); +} + static int __init hp_sdc_init_hppa(struct parisc_device *d) { + int ret; + if (!d) return 1; if (hp_sdc.dev != NULL) @@ -944,13 +952,26 @@ static int __init hp_sdc_init_hppa(struct parisc_device *d) hp_sdc.data_io = d->hpa.start + 0x800; hp_sdc.status_io = d->hpa.start + 0x801; - return hp_sdc_init(); + INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed); + + ret = hp_sdc_init(); + /* after sucessfull initialization give SDC some time to settle + * and then load the hp_sdc_mlc upper layer driver */ + if (!ret) + schedule_delayed_work(&moduleloader_work, + msecs_to_jiffies(2000)); + + return ret; } #endif /* __hppa__ */ static void hp_sdc_exit(void) { + /* do nothing if we don't have a SDC */ + if (!hp_sdc.dev) + return; + write_lock_irq(&hp_sdc.lock); /* Turn off all maskable "sub-function" irq's. */ @@ -969,6 +990,7 @@ static void hp_sdc_exit(void) tasklet_kill(&hp_sdc.task); #if defined(__hppa__) + cancel_delayed_work_sync(&moduleloader_work); if (unregister_parisc_driver(&hp_sdc_driver)) printk(KERN_WARNING PREFIX "Error unregistering HP SDC"); #endif diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 6fa2deff7446..fb8a3cd3ffd0 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -151,6 +151,14 @@ static struct dmi_system_id __initdata i8042_dmi_noloop_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "01"), }, }, + { + .ident = "HP DV9700", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv9700"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Rev 1"), + }, + }, { } }; @@ -369,6 +377,24 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { { } }; +static struct dmi_system_id __initdata i8042_dmi_reset_table[] = { + { + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + }, + }, + { + .ident = "LG Electronics X110", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "X110"), + DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."), + }, + }, + { } +}; + #ifdef CONFIG_PNP static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { { @@ -378,6 +404,13 @@ static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = { DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"), }, }, + { + .ident = "MSI Wind U-100", + .matches = { + DMI_MATCH(DMI_BOARD_NAME, "U-100"), + DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"), + }, + }, { } }; #endif @@ -690,6 +723,9 @@ static int __init i8042_platform_init(void) #endif #ifdef CONFIG_X86 + if (dmi_check_system(i8042_dmi_reset_table)) + i8042_reset = 1; + if (dmi_check_system(i8042_dmi_noloop_table)) i8042_noloop = 1; diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 170f71ee5772..3cffb704e374 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -712,22 +712,43 @@ static int i8042_controller_check(void) static int i8042_controller_selftest(void) { unsigned char param; + int i = 0; if (!i8042_reset) return 0; - if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { - printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); - return -ENODEV; - } + /* + * We try this 5 times; on some really fragile systems this does not + * take the first time... + */ + do { + + if (i8042_command(¶m, I8042_CMD_CTL_TEST)) { + printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n"); + return -ENODEV; + } + + if (param == I8042_RET_CTL_TEST) + return 0; - if (param != I8042_RET_CTL_TEST) { printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n", - param, I8042_RET_CTL_TEST); - return -EIO; - } + param, I8042_RET_CTL_TEST); + msleep(50); + } while (i++ < 5); +#ifdef CONFIG_X86 + /* + * On x86, we don't fail entire i8042 initialization if controller + * reset fails in hopes that keyboard port will still be functional + * and user will still get a working keyboard. This is especially + * important on netbooks. On other arches we trust hardware more. + */ + printk(KERN_INFO + "i8042: giving up on controller selftest, continuing anyway...\n"); return 0; +#else + return -EIO; +#endif } /* diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index bb6486a8c070..b01fd61dadcc 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -29,6 +29,51 @@ config TOUCHSCREEN_ADS7846 To compile this driver as a module, choose M here: the module will be called ads7846. +config TOUCHSCREEN_AD7877 + tristate "AD7877 based touchscreens" + depends on SPI_MASTER + help + Say Y here if you have a touchscreen interface using the + AD7877 controller, and your board-specific initialization + code includes that in its table of SPI devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7877. + +config TOUCHSCREEN_AD7879_I2C + tristate "AD7879 based touchscreens: AD7879-1 I2C Interface" + depends on I2C + select TOUCHSCREEN_AD7879 + help + Say Y here if you have a touchscreen interface using the + AD7879-1 controller, and your board-specific initialization + code includes that in its table of I2C devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7879. + +config TOUCHSCREEN_AD7879_SPI + tristate "AD7879 based touchscreens: AD7879 SPI Interface" + depends on SPI_MASTER && TOUCHSCREEN_AD7879_I2C = n + select TOUCHSCREEN_AD7879 + help + Say Y here if you have a touchscreen interface using the + AD7879 controller, and your board-specific initialization + code includes that in its table of SPI devices. + + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7879. + +config TOUCHSCREEN_AD7879 + tristate + default n + config TOUCHSCREEN_BITSY tristate "Compaq iPAQ H3600 (Bitsy) touchscreen" depends on SA1100_BITSY @@ -308,6 +353,19 @@ config TOUCHSCREEN_WM97XX_MAINSTONE To compile this driver as a module, choose M here: the module will be called mainstone-wm97xx. +config TOUCHSCREEN_WM97XX_ZYLONITE + tristate "Zylonite accelerated touch" + depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE + select TOUCHSCREEN_WM9713 + help + Say Y here for support for streaming mode with the touchscreen + on Zylonite systems. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called zylonite-wm97xx. + config TOUCHSCREEN_USB_COMPOSITE tristate "USB Touchscreen Driver" depends on USB_ARCH_HAS_HCD diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index d3375aff46fe..6700f7b9d165 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -6,6 +6,8 @@ wm97xx-ts-y := wm97xx-core.o +obj-$(CONFIG_TOUCHSCREEN_AD7877) += ad7877.o +obj-$(CONFIG_TOUCHSCREEN_AD7879) += ad7879.o obj-$(CONFIG_TOUCHSCREEN_ADS7846) += ads7846.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o @@ -34,3 +36,4 @@ wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705) += wm9705.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712) += wm9712.o wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713) += wm9713.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o +obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c new file mode 100644 index 000000000000..ecaeb7e8e75e --- /dev/null +++ b/drivers/input/touchscreen/ad7877.c @@ -0,0 +1,844 @@ +/* + * Copyright (C) 2006-2008 Michael Hennerich, Analog Devices Inc. + * + * Description: AD7877 based touchscreen, sensor (ADCs), DAC and GPIO driver + * Based on: ads7846.c + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * History: + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak <imre.deak@nokia.com> + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + */ + + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/spi/spi.h> +#include <linux/spi/ad7877.h> +#include <asm/irq.h> + +#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) + +#define MAX_SPI_FREQ_HZ 20000000 +#define MAX_12BIT ((1<<12)-1) + +#define AD7877_REG_ZEROS 0 +#define AD7877_REG_CTRL1 1 +#define AD7877_REG_CTRL2 2 +#define AD7877_REG_ALERT 3 +#define AD7877_REG_AUX1HIGH 4 +#define AD7877_REG_AUX1LOW 5 +#define AD7877_REG_BAT1HIGH 6 +#define AD7877_REG_BAT1LOW 7 +#define AD7877_REG_BAT2HIGH 8 +#define AD7877_REG_BAT2LOW 9 +#define AD7877_REG_TEMP1HIGH 10 +#define AD7877_REG_TEMP1LOW 11 +#define AD7877_REG_SEQ0 12 +#define AD7877_REG_SEQ1 13 +#define AD7877_REG_DAC 14 +#define AD7877_REG_NONE1 15 +#define AD7877_REG_EXTWRITE 15 +#define AD7877_REG_XPLUS 16 +#define AD7877_REG_YPLUS 17 +#define AD7877_REG_Z2 18 +#define AD7877_REG_aux1 19 +#define AD7877_REG_aux2 20 +#define AD7877_REG_aux3 21 +#define AD7877_REG_bat1 22 +#define AD7877_REG_bat2 23 +#define AD7877_REG_temp1 24 +#define AD7877_REG_temp2 25 +#define AD7877_REG_Z1 26 +#define AD7877_REG_GPIOCTRL1 27 +#define AD7877_REG_GPIOCTRL2 28 +#define AD7877_REG_GPIODATA 29 +#define AD7877_REG_NONE2 30 +#define AD7877_REG_NONE3 31 + +#define AD7877_SEQ_YPLUS_BIT (1<<11) +#define AD7877_SEQ_XPLUS_BIT (1<<10) +#define AD7877_SEQ_Z2_BIT (1<<9) +#define AD7877_SEQ_AUX1_BIT (1<<8) +#define AD7877_SEQ_AUX2_BIT (1<<7) +#define AD7877_SEQ_AUX3_BIT (1<<6) +#define AD7877_SEQ_BAT1_BIT (1<<5) +#define AD7877_SEQ_BAT2_BIT (1<<4) +#define AD7877_SEQ_TEMP1_BIT (1<<3) +#define AD7877_SEQ_TEMP2_BIT (1<<2) +#define AD7877_SEQ_Z1_BIT (1<<1) + +enum { + AD7877_SEQ_YPOS = 0, + AD7877_SEQ_XPOS = 1, + AD7877_SEQ_Z2 = 2, + AD7877_SEQ_AUX1 = 3, + AD7877_SEQ_AUX2 = 4, + AD7877_SEQ_AUX3 = 5, + AD7877_SEQ_BAT1 = 6, + AD7877_SEQ_BAT2 = 7, + AD7877_SEQ_TEMP1 = 8, + AD7877_SEQ_TEMP2 = 9, + AD7877_SEQ_Z1 = 10, + AD7877_NR_SENSE = 11, +}; + +/* DAC Register Default RANGE 0 to Vcc, Volatge Mode, DAC On */ +#define AD7877_DAC_CONF 0x1 + +/* If gpio3 is set AUX3/GPIO3 acts as GPIO Output */ +#define AD7877_EXTW_GPIO_3_CONF 0x1C4 +#define AD7877_EXTW_GPIO_DATA 0x200 + +/* Control REG 2 */ +#define AD7877_TMR(x) ((x & 0x3) << 0) +#define AD7877_REF(x) ((x & 0x1) << 2) +#define AD7877_POL(x) ((x & 0x1) << 3) +#define AD7877_FCD(x) ((x & 0x3) << 4) +#define AD7877_PM(x) ((x & 0x3) << 6) +#define AD7877_ACQ(x) ((x & 0x3) << 8) +#define AD7877_AVG(x) ((x & 0x3) << 10) + +/* Control REG 1 */ +#define AD7877_SER (1 << 11) /* non-differential */ +#define AD7877_DFR (0 << 11) /* differential */ + +#define AD7877_MODE_NOC (0) /* Do not convert */ +#define AD7877_MODE_SCC (1) /* Single channel conversion */ +#define AD7877_MODE_SEQ0 (2) /* Sequence 0 in Slave Mode */ +#define AD7877_MODE_SEQ1 (3) /* Sequence 1 in Master Mode */ + +#define AD7877_CHANADD(x) ((x&0xF)<<7) +#define AD7877_READADD(x) ((x)<<2) +#define AD7877_WRITEADD(x) ((x)<<12) + +#define AD7877_READ_CHAN(x) (AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_SER | \ + AD7877_MODE_SCC | AD7877_CHANADD(AD7877_REG_ ## x) | \ + AD7877_READADD(AD7877_REG_ ## x)) + +#define AD7877_MM_SEQUENCE (AD7877_SEQ_YPLUS_BIT | AD7877_SEQ_XPLUS_BIT | \ + AD7877_SEQ_Z2_BIT | AD7877_SEQ_Z1_BIT) + +/* + * Non-touchscreen sensors only use single-ended conversions. + */ + +struct ser_req { + u16 reset; + u16 ref_on; + u16 command; + u16 sample; + struct spi_message msg; + struct spi_transfer xfer[6]; +}; + +struct ad7877 { + struct input_dev *input; + char phys[32]; + + struct spi_device *spi; + u16 model; + u16 vref_delay_usecs; + u16 x_plate_ohms; + u16 pressure_max; + + u16 cmd_crtl1; + u16 cmd_crtl2; + u16 cmd_dummy; + u16 dac; + + u8 stopacq_polarity; + u8 first_conversion_delay; + u8 acquisition_time; + u8 averaging; + u8 pen_down_acc_interval; + + u16 conversion_data[AD7877_NR_SENSE]; + + struct spi_transfer xfer[AD7877_NR_SENSE + 2]; + struct spi_message msg; + + struct mutex mutex; + unsigned disabled:1; /* P: mutex */ + unsigned gpio3:1; /* P: mutex */ + unsigned gpio4:1; /* P: mutex */ + + spinlock_t lock; + struct timer_list timer; /* P: lock */ + unsigned pending:1; /* P: lock */ +}; + +static int gpio3; +module_param(gpio3, int, 0); +MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3"); + +/* + * ad7877_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done using spi_async() in the interrupt handler. + */ + +static int ad7877_read(struct spi_device *spi, u16 reg) +{ + struct ser_req *req; + int status, ret; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) (AD7877_WRITEADD(AD7877_REG_CTRL1) | + AD7877_READADD(reg)); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + req->xfer[1].rx_buf = &req->sample; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + ret = status ? : req->sample; + + kfree(req); + + return ret; +} + +static int ad7877_write(struct spi_device *spi, u16 reg, u16 val) +{ + struct ser_req *req; + int status; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) (AD7877_WRITEADD(reg) | (val & MAX_12BIT)); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + + status = spi_sync(spi, &req->msg); + + kfree(req); + + return status; +} + +static int ad7877_read_adc(struct spi_device *spi, unsigned command) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + struct ser_req *req; + int status; + int sample; + int i; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + /* activate reference, so it has time to settle; */ + req->ref_on = AD7877_WRITEADD(AD7877_REG_CTRL2) | + AD7877_POL(ts->stopacq_polarity) | + AD7877_AVG(0) | AD7877_PM(2) | AD7877_TMR(0) | + AD7877_ACQ(ts->acquisition_time) | AD7877_FCD(0); + + req->reset = AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_MODE_NOC; + + req->command = (u16) command; + + req->xfer[0].tx_buf = &req->reset; + req->xfer[0].len = 2; + + req->xfer[1].tx_buf = &req->ref_on; + req->xfer[1].len = 2; + req->xfer[1].delay_usecs = ts->vref_delay_usecs; + + req->xfer[2].tx_buf = &req->command; + req->xfer[2].len = 2; + req->xfer[2].delay_usecs = ts->vref_delay_usecs; + + req->xfer[3].rx_buf = &req->sample; + req->xfer[3].len = 2; + + req->xfer[4].tx_buf = &ts->cmd_crtl2; /*REF OFF*/ + req->xfer[4].len = 2; + + req->xfer[5].tx_buf = &ts->cmd_crtl1; /*DEFAULT*/ + req->xfer[5].len = 2; + + /* group all the transfers together, so we can't interfere with + * reading touchscreen state; disable penirq while sampling + */ + for (i = 0; i < 6; i++) + spi_message_add_tail(&req->xfer[i], &req->msg); + + status = spi_sync(spi, &req->msg); + sample = req->sample; + + kfree(req); + + return status ? : sample; +} + +static void ad7877_rx(struct ad7877 *ts) +{ + struct input_dev *input_dev = ts->input; + unsigned Rt; + u16 x, y, z1, z2; + + x = ts->conversion_data[AD7877_SEQ_XPOS] & MAX_12BIT; + y = ts->conversion_data[AD7877_SEQ_YPOS] & MAX_12BIT; + z1 = ts->conversion_data[AD7877_SEQ_Z1] & MAX_12BIT; + z2 = ts->conversion_data[AD7877_SEQ_Z2] & MAX_12BIT; + + /* + * The samples processed here are already preprocessed by the AD7877. + * The preprocessing function consists of an averaging filter. + * The combination of 'first conversion delay' and averaging provides a robust solution, + * discarding the spurious noise in the signal and keeping only the data of interest. + * The size of the averaging filter is programmable. (dev.platform_data, see linux/spi/ad7877.h) + * Other user-programmable conversion controls include variable acquisition time, + * and first conversion delay. Up to 16 averages can be taken per conversion. + */ + + if (likely(x && z1)) { + /* compute touch pressure resistance using equation #1 */ + Rt = (z2 - z1) * x * ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, Rt); + input_sync(input_dev); + } +} + +static inline void ad7877_ts_event_release(struct ad7877 *ts) +{ + struct input_dev *input_dev = ts->input; + + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); +} + +static void ad7877_timer(unsigned long handle) +{ + struct ad7877 *ts = (void *)handle; + + ad7877_ts_event_release(ts); +} + +static irqreturn_t ad7877_irq(int irq, void *handle) +{ + struct ad7877 *ts = handle; + unsigned long flags; + int status; + + /* + * The repeated conversion sequencer controlled by TMR kicked off + * too fast. We ignore the last and process the sample sequence + * currently in the queue. It can't be older than 9.4ms, and we + * need to avoid that ts->msg doesn't get issued twice while in work. + */ + + spin_lock_irqsave(&ts->lock, flags); + if (!ts->pending) { + ts->pending = 1; + + status = spi_async(ts->spi, &ts->msg); + if (status) + dev_err(&ts->spi->dev, "spi_sync --> %d\n", status); + } + spin_unlock_irqrestore(&ts->lock, flags); + + return IRQ_HANDLED; +} + +static void ad7877_callback(void *_ts) +{ + struct ad7877 *ts = _ts; + + spin_lock_irq(&ts->lock); + + ad7877_rx(ts); + ts->pending = 0; + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); + + spin_unlock_irq(&ts->lock); +} + +static void ad7877_disable(struct ad7877 *ts) +{ + mutex_lock(&ts->mutex); + + if (!ts->disabled) { + ts->disabled = 1; + disable_irq(ts->spi->irq); + + /* Wait for spi_async callback */ + while (ts->pending) + msleep(1); + + if (del_timer_sync(&ts->timer)) + ad7877_ts_event_release(ts); + } + + /* we know the chip's in lowpower mode since we always + * leave it that way after every request + */ + + mutex_unlock(&ts->mutex); +} + +static void ad7877_enable(struct ad7877 *ts) +{ + mutex_lock(&ts->mutex); + + if (ts->disabled) { + ts->disabled = 0; + enable_irq(ts->spi->irq); + } + + mutex_unlock(&ts->mutex); +} + +#define SHOW(name) static ssize_t \ +name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \ +{ \ + struct ad7877 *ts = dev_get_drvdata(dev); \ + ssize_t v = ad7877_read_adc(ts->spi, \ + AD7877_READ_CHAN(name)); \ + if (v < 0) \ + return v; \ + return sprintf(buf, "%u\n", (unsigned) v); \ +} \ +static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL); + +SHOW(aux1) +SHOW(aux2) +SHOW(aux3) +SHOW(bat1) +SHOW(bat2) +SHOW(temp1) +SHOW(temp2) + +static ssize_t ad7877_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ad7877_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + if (val) + ad7877_disable(ts); + else + ad7877_enable(ts); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ad7877_disable_show, ad7877_disable_store); + +static ssize_t ad7877_dac_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->dac); +} + +static ssize_t ad7877_dac_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->dac = val & 0xFF; + ad7877_write(ts->spi, AD7877_REG_DAC, (ts->dac << 4) | AD7877_DAC_CONF); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(dac, 0664, ad7877_dac_show, ad7877_dac_store); + +static ssize_t ad7877_gpio3_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio3); +} + +static ssize_t ad7877_gpio3_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio3 = !!val; + ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA | + (ts->gpio4 << 4) | (ts->gpio3 << 5)); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store); + +static ssize_t ad7877_gpio4_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio4); +} + +static ssize_t ad7877_gpio4_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7877 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio4 = !!val; + ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA | + (ts->gpio4 << 4) | (ts->gpio3 << 5)); + mutex_unlock(&ts->mutex); + + return count; +} + +static DEVICE_ATTR(gpio4, 0664, ad7877_gpio4_show, ad7877_gpio4_store); + +static struct attribute *ad7877_attributes[] = { + &dev_attr_temp1.attr, + &dev_attr_temp2.attr, + &dev_attr_aux1.attr, + &dev_attr_aux2.attr, + &dev_attr_bat1.attr, + &dev_attr_bat2.attr, + &dev_attr_disable.attr, + &dev_attr_dac.attr, + &dev_attr_gpio4.attr, + NULL +}; + +static const struct attribute_group ad7877_attr_group = { + .attrs = ad7877_attributes, +}; + +static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts) +{ + struct spi_message *m; + int i; + + ts->cmd_crtl2 = AD7877_WRITEADD(AD7877_REG_CTRL2) | + AD7877_POL(ts->stopacq_polarity) | + AD7877_AVG(ts->averaging) | AD7877_PM(1) | + AD7877_TMR(ts->pen_down_acc_interval) | + AD7877_ACQ(ts->acquisition_time) | + AD7877_FCD(ts->first_conversion_delay); + + ad7877_write(spi, AD7877_REG_CTRL2, ts->cmd_crtl2); + + ts->cmd_crtl1 = AD7877_WRITEADD(AD7877_REG_CTRL1) | + AD7877_READADD(AD7877_REG_XPLUS-1) | + AD7877_MODE_SEQ1 | AD7877_DFR; + + ad7877_write(spi, AD7877_REG_CTRL1, ts->cmd_crtl1); + + ts->cmd_dummy = 0; + + m = &ts->msg; + + spi_message_init(m); + + m->complete = ad7877_callback; + m->context = ts; + + ts->xfer[0].tx_buf = &ts->cmd_crtl1; + ts->xfer[0].len = 2; + + spi_message_add_tail(&ts->xfer[0], m); + + ts->xfer[1].tx_buf = &ts->cmd_dummy; /* Send ZERO */ + ts->xfer[1].len = 2; + + spi_message_add_tail(&ts->xfer[1], m); + + for (i = 0; i < 11; i++) { + ts->xfer[i + 2].rx_buf = &ts->conversion_data[AD7877_SEQ_YPOS + i]; + ts->xfer[i + 2].len = 2; + spi_message_add_tail(&ts->xfer[i + 2], m); + } +} + +static int __devinit ad7877_probe(struct spi_device *spi) +{ + struct ad7877 *ts; + struct input_dev *input_dev; + struct ad7877_platform_data *pdata = spi->dev.platform_data; + int err; + u16 verify; + + if (!spi->irq) { + dev_dbg(&spi->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_dbg(&spi->dev, "no platform data?\n"); + return -ENODEV; + } + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_dbg(&spi->dev, "SPI CLK %d Hz?\n",spi->max_speed_hz); + return -EINVAL; + } + + ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + err = -ENOMEM; + goto err_free_mem; + } + + dev_set_drvdata(&spi->dev, ts); + ts->spi = spi; + ts->input = input_dev; + + setup_timer(&ts->timer, ad7877_timer, (unsigned long) ts); + mutex_init(&ts->mutex); + spin_lock_init(&ts->lock); + + ts->model = pdata->model ? : 7877; + ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100; + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + ts->stopacq_polarity = pdata->stopacq_polarity; + ts->first_conversion_delay = pdata->first_conversion_delay; + ts->acquisition_time = pdata->acquisition_time; + ts->averaging = pdata->averaging; + ts->pen_down_acc_interval = pdata->pen_down_acc_interval; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); + + input_dev->name = "AD7877 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->dev.parent = &spi->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + __set_bit(ABS_PRESSURE, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + ad7877_write(spi, AD7877_REG_SEQ1, AD7877_MM_SEQUENCE); + + verify = ad7877_read(spi, AD7877_REG_SEQ1); + + if (verify != AD7877_MM_SEQUENCE){ + dev_err(&spi->dev, "%s: Failed to probe %s\n", + dev_name(&spi->dev), input_dev->name); + err = -ENODEV; + goto err_free_mem; + } + + if (gpio3) + ad7877_write(spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_3_CONF); + + ad7877_setup_ts_def_msg(spi, ts); + + /* Request AD7877 /DAV GPIO interrupt */ + + err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING, + spi->dev.driver->name, ts); + if (err) { + dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); + goto err_free_mem; + } + + err = sysfs_create_group(&spi->dev.kobj, &ad7877_attr_group); + if (err) + goto err_free_irq; + + err = device_create_file(&spi->dev, + gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); + if (err) + goto err_remove_attr_group; + + err = input_register_device(input_dev); + if (err) + goto err_remove_attr; + + return 0; + +err_remove_attr: + device_remove_file(&spi->dev, + gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); +err_remove_attr_group: + sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); +err_free_irq: + free_irq(spi->irq, ts); +err_free_mem: + input_free_device(input_dev); + kfree(ts); + dev_set_drvdata(&spi->dev, NULL); + return err; +} + +static int __devexit ad7877_remove(struct spi_device *spi) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + + sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group); + device_remove_file(&spi->dev, + gpio3 ? &dev_attr_gpio3 : &dev_attr_aux3); + + ad7877_disable(ts); + free_irq(ts->spi->irq, ts); + + input_unregister_device(ts->input); + kfree(ts); + + dev_dbg(&spi->dev, "unregistered touchscreen\n"); + dev_set_drvdata(&spi->dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ad7877_suspend(struct spi_device *spi, pm_message_t message) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + + ad7877_disable(ts); + + return 0; +} + +static int ad7877_resume(struct spi_device *spi) +{ + struct ad7877 *ts = dev_get_drvdata(&spi->dev); + + ad7877_enable(ts); + + return 0; +} +#else +#define ad7877_suspend NULL +#define ad7877_resume NULL +#endif + +static struct spi_driver ad7877_driver = { + .driver = { + .name = "ad7877", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7877_probe, + .remove = __devexit_p(ad7877_remove), + .suspend = ad7877_suspend, + .resume = ad7877_resume, +}; + +static int __init ad7877_init(void) +{ + return spi_register_driver(&ad7877_driver); +} +module_init(ad7877_init); + +static void __exit ad7877_exit(void) +{ + spi_unregister_driver(&ad7877_driver); +} +module_exit(ad7877_exit); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("AD7877 touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c new file mode 100644 index 000000000000..5d8a70398807 --- /dev/null +++ b/drivers/input/touchscreen/ad7879.c @@ -0,0 +1,781 @@ +/* + * Copyright (C) 2008 Michael Hennerich, Analog Devices Inc. + * + * Description: AD7879 based touchscreen, and GPIO driver (I2C/SPI Interface) + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + * + * History: + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * Various changes: Imre Deak <imre.deak@nokia.com> + * + * Using code from: + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * - ad7877.c + * Copyright (C) 2006-2008 Analog Devices Inc. + */ + +#include <linux/device.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> + +#include <linux/spi/ad7879.h> + +#define AD7879_REG_ZEROS 0 +#define AD7879_REG_CTRL1 1 +#define AD7879_REG_CTRL2 2 +#define AD7879_REG_CTRL3 3 +#define AD7879_REG_AUX1HIGH 4 +#define AD7879_REG_AUX1LOW 5 +#define AD7879_REG_TEMP1HIGH 6 +#define AD7879_REG_TEMP1LOW 7 +#define AD7879_REG_XPLUS 8 +#define AD7879_REG_YPLUS 9 +#define AD7879_REG_Z1 10 +#define AD7879_REG_Z2 11 +#define AD7879_REG_AUXVBAT 12 +#define AD7879_REG_TEMP 13 +#define AD7879_REG_REVID 14 + +/* Control REG 1 */ +#define AD7879_TMR(x) ((x & 0xFF) << 0) +#define AD7879_ACQ(x) ((x & 0x3) << 8) +#define AD7879_MODE_NOC (0 << 10) /* Do not convert */ +#define AD7879_MODE_SCC (1 << 10) /* Single channel conversion */ +#define AD7879_MODE_SEQ0 (2 << 10) /* Sequence 0 in Slave Mode */ +#define AD7879_MODE_SEQ1 (3 << 10) /* Sequence 1 in Master Mode */ +#define AD7879_MODE_INT (1 << 15) /* PENIRQ disabled INT enabled */ + +/* Control REG 2 */ +#define AD7879_FCD(x) ((x & 0x3) << 0) +#define AD7879_RESET (1 << 4) +#define AD7879_MFS(x) ((x & 0x3) << 5) +#define AD7879_AVG(x) ((x & 0x3) << 7) +#define AD7879_SER (1 << 9) /* non-differential */ +#define AD7879_DFR (0 << 9) /* differential */ +#define AD7879_GPIOPOL (1 << 10) +#define AD7879_GPIODIR (1 << 11) +#define AD7879_GPIO_DATA (1 << 12) +#define AD7879_GPIO_EN (1 << 13) +#define AD7879_PM(x) ((x & 0x3) << 14) +#define AD7879_PM_SHUTDOWN (0) +#define AD7879_PM_DYN (1) +#define AD7879_PM_FULLON (2) + +/* Control REG 3 */ +#define AD7879_TEMPMASK_BIT (1<<15) +#define AD7879_AUXVBATMASK_BIT (1<<14) +#define AD7879_INTMODE_BIT (1<<13) +#define AD7879_GPIOALERTMASK_BIT (1<<12) +#define AD7879_AUXLOW_BIT (1<<11) +#define AD7879_AUXHIGH_BIT (1<<10) +#define AD7879_TEMPLOW_BIT (1<<9) +#define AD7879_TEMPHIGH_BIT (1<<8) +#define AD7879_YPLUS_BIT (1<<7) +#define AD7879_XPLUS_BIT (1<<6) +#define AD7879_Z1_BIT (1<<5) +#define AD7879_Z2_BIT (1<<4) +#define AD7879_AUX_BIT (1<<3) +#define AD7879_VBAT_BIT (1<<2) +#define AD7879_TEMP_BIT (1<<1) + +enum { + AD7879_SEQ_XPOS = 0, + AD7879_SEQ_YPOS = 1, + AD7879_SEQ_Z1 = 2, + AD7879_SEQ_Z2 = 3, + AD7879_NR_SENSE = 4, +}; + +#define MAX_12BIT ((1<<12)-1) +#define TS_PEN_UP_TIMEOUT msecs_to_jiffies(50) + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#define AD7879_DEVID 0x7A +typedef struct spi_device bus_device; +#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) +#define AD7879_DEVID 0x79 +typedef struct i2c_client bus_device; +#endif + +struct ad7879 { + bus_device *bus; + struct input_dev *input; + struct work_struct work; + struct timer_list timer; + + struct mutex mutex; + unsigned disabled:1; /* P: mutex */ + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) + struct spi_message msg; + struct spi_transfer xfer[AD7879_NR_SENSE + 1]; + u16 cmd; +#endif + u16 conversion_data[AD7879_NR_SENSE]; + char phys[32]; + u8 first_conversion_delay; + u8 acquisition_time; + u8 averaging; + u8 pen_down_acc_interval; + u8 median; + u16 x_plate_ohms; + u16 pressure_max; + u16 gpio_init; + u16 cmd_crtl1; + u16 cmd_crtl2; + u16 cmd_crtl3; + unsigned gpio:1; +}; + +static int ad7879_read(bus_device *, u8); +static int ad7879_write(bus_device *, u8, u16); +static void ad7879_collect(struct ad7879 *); + +static void ad7879_report(struct ad7879 *ts) +{ + struct input_dev *input_dev = ts->input; + unsigned Rt; + u16 x, y, z1, z2; + + x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT; + y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT; + z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT; + z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT; + + /* + * The samples processed here are already preprocessed by the AD7879. + * The preprocessing function consists of a median and an averaging filter. + * The combination of these two techniques provides a robust solution, + * discarding the spurious noise in the signal and keeping only the data of interest. + * The size of both filters is programmable. (dev.platform_data, see linux/spi/ad7879.h) + * Other user-programmable conversion controls include variable acquisition time, + * and first conversion delay. Up to 16 averages can be taken per conversion. + */ + + if (likely(x && z1)) { + /* compute touch pressure resistance using equation #1 */ + Rt = (z2 - z1) * x * ts->x_plate_ohms; + Rt /= z1; + Rt = (Rt + 2047) >> 12; + + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, Rt); + input_sync(input_dev); + } +} + +static void ad7879_work(struct work_struct *work) +{ + struct ad7879 *ts = container_of(work, struct ad7879, work); + + /* use keventd context to read the result registers */ + ad7879_collect(ts); + ad7879_report(ts); + mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT); +} + +static void ad7879_ts_event_release(struct ad7879 *ts) +{ + struct input_dev *input_dev = ts->input; + + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); +} + +static void ad7879_timer(unsigned long handle) +{ + struct ad7879 *ts = (void *)handle; + + ad7879_ts_event_release(ts); +} + +static irqreturn_t ad7879_irq(int irq, void *handle) +{ + struct ad7879 *ts = handle; + + /* The repeated conversion sequencer controlled by TMR kicked off too fast. + * We ignore the last and process the sample sequence currently in the queue. + * It can't be older than 9.4ms + */ + + if (!work_pending(&ts->work)) + schedule_work(&ts->work); + + return IRQ_HANDLED; +} + +static void ad7879_setup(struct ad7879 *ts) +{ + ts->cmd_crtl3 = AD7879_YPLUS_BIT | + AD7879_XPLUS_BIT | + AD7879_Z2_BIT | + AD7879_Z1_BIT | + AD7879_TEMPMASK_BIT | + AD7879_AUXVBATMASK_BIT | + AD7879_GPIOALERTMASK_BIT; + + ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR | + AD7879_AVG(ts->averaging) | + AD7879_MFS(ts->median) | + AD7879_FCD(ts->first_conversion_delay) | + ts->gpio_init; + + ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 | + AD7879_ACQ(ts->acquisition_time) | + AD7879_TMR(ts->pen_down_acc_interval); + + ad7879_write(ts->bus, AD7879_REG_CTRL2, ts->cmd_crtl2); + ad7879_write(ts->bus, AD7879_REG_CTRL3, ts->cmd_crtl3); + ad7879_write(ts->bus, AD7879_REG_CTRL1, ts->cmd_crtl1); +} + +static void ad7879_disable(struct ad7879 *ts) +{ + mutex_lock(&ts->mutex); + + if (!ts->disabled) { + + ts->disabled = 1; + disable_irq(ts->bus->irq); + + cancel_work_sync(&ts->work); + + if (del_timer_sync(&ts->timer)) + ad7879_ts_event_release(ts); + + ad7879_write(ts->bus, AD7879_REG_CTRL2, + AD7879_PM(AD7879_PM_SHUTDOWN)); + } + + mutex_unlock(&ts->mutex); +} + +static void ad7879_enable(struct ad7879 *ts) +{ + mutex_lock(&ts->mutex); + + if (ts->disabled) { + ad7879_setup(ts); + ts->disabled = 0; + enable_irq(ts->bus->irq); + } + + mutex_unlock(&ts->mutex); +} + +static ssize_t ad7879_disable_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->disabled); +} + +static ssize_t ad7879_disable_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + if (val) + ad7879_disable(ts); + else + ad7879_enable(ts); + + return count; +} + +static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store); + +static ssize_t ad7879_gpio_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + + return sprintf(buf, "%u\n", ts->gpio); +} + +static ssize_t ad7879_gpio_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ad7879 *ts = dev_get_drvdata(dev); + unsigned long val; + int error; + + error = strict_strtoul(buf, 10, &val); + if (error) + return error; + + mutex_lock(&ts->mutex); + ts->gpio = !!val; + error = ad7879_write(ts->bus, AD7879_REG_CTRL2, + ts->gpio ? + ts->cmd_crtl2 & ~AD7879_GPIO_DATA : + ts->cmd_crtl2 | AD7879_GPIO_DATA); + mutex_unlock(&ts->mutex); + + return error ? : count; +} + +static DEVICE_ATTR(gpio, 0664, ad7879_gpio_show, ad7879_gpio_store); + +static struct attribute *ad7879_attributes[] = { + &dev_attr_disable.attr, + &dev_attr_gpio.attr, + NULL +}; + +static const struct attribute_group ad7879_attr_group = { + .attrs = ad7879_attributes, +}; + +static int __devinit ad7879_construct(bus_device *bus, struct ad7879 *ts) +{ + struct input_dev *input_dev; + struct ad7879_platform_data *pdata = bus->dev.platform_data; + int err; + u16 revid; + + if (!bus->irq) { + dev_err(&bus->dev, "no IRQ?\n"); + return -ENODEV; + } + + if (!pdata) { + dev_err(&bus->dev, "no platform data?\n"); + return -ENODEV; + } + + input_dev = input_allocate_device(); + if (!input_dev) + return -ENOMEM; + + ts->input = input_dev; + + setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts); + INIT_WORK(&ts->work, ad7879_work); + mutex_init(&ts->mutex); + + ts->x_plate_ohms = pdata->x_plate_ohms ? : 400; + ts->pressure_max = pdata->pressure_max ? : ~0; + + ts->first_conversion_delay = pdata->first_conversion_delay; + ts->acquisition_time = pdata->acquisition_time; + ts->averaging = pdata->averaging; + ts->pen_down_acc_interval = pdata->pen_down_acc_interval; + ts->median = pdata->median; + + if (pdata->gpio_output) + ts->gpio_init = AD7879_GPIO_EN | + (pdata->gpio_default ? 0 : AD7879_GPIO_DATA); + else + ts->gpio_init = AD7879_GPIO_EN | AD7879_GPIODIR; + + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&bus->dev)); + + input_dev->name = "AD7879 Touchscreen"; + input_dev->phys = ts->phys; + input_dev->dev.parent = &bus->dev; + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(ABS_X, input_dev->absbit); + __set_bit(ABS_Y, input_dev->absbit); + __set_bit(ABS_PRESSURE, input_dev->absbit); + + input_set_abs_params(input_dev, ABS_X, + pdata->x_min ? : 0, + pdata->x_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_Y, + pdata->y_min ? : 0, + pdata->y_max ? : MAX_12BIT, + 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, + pdata->pressure_min, pdata->pressure_max, 0, 0); + + err = ad7879_write(bus, AD7879_REG_CTRL2, AD7879_RESET); + + if (err < 0) { + dev_err(&bus->dev, "Failed to write %s\n", input_dev->name); + goto err_free_mem; + } + + revid = ad7879_read(bus, AD7879_REG_REVID); + + if ((revid & 0xFF) != AD7879_DEVID) { + dev_err(&bus->dev, "Failed to probe %s\n", input_dev->name); + err = -ENODEV; + goto err_free_mem; + } + + ad7879_setup(ts); + + err = request_irq(bus->irq, ad7879_irq, + IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts); + + if (err) { + dev_err(&bus->dev, "irq %d busy?\n", bus->irq); + goto err_free_mem; + } + + err = sysfs_create_group(&bus->dev.kobj, &ad7879_attr_group); + if (err) + goto err_free_irq; + + err = input_register_device(input_dev); + if (err) + goto err_remove_attr; + + dev_info(&bus->dev, "Rev.%d touchscreen, irq %d\n", + revid >> 8, bus->irq); + + return 0; + +err_remove_attr: + sysfs_remove_group(&bus->dev.kobj, &ad7879_attr_group); +err_free_irq: + free_irq(bus->irq, ts); +err_free_mem: + input_free_device(input_dev); + + return err; +} + +static int __devexit ad7879_destroy(bus_device *bus, struct ad7879 *ts) +{ + ad7879_disable(ts); + sysfs_remove_group(&ts->bus->dev.kobj, &ad7879_attr_group); + free_irq(ts->bus->irq, ts); + input_unregister_device(ts->input); + dev_dbg(&bus->dev, "unregistered touchscreen\n"); + + return 0; +} + +#ifdef CONFIG_PM +static int ad7879_suspend(bus_device *bus, pm_message_t message) +{ + struct ad7879 *ts = dev_get_drvdata(&bus->dev); + + ad7879_disable(ts); + + return 0; +} + +static int ad7879_resume(bus_device *bus) +{ + struct ad7879 *ts = dev_get_drvdata(&bus->dev); + + ad7879_enable(ts); + + return 0; +} +#else +#define ad7879_suspend NULL +#define ad7879_resume NULL +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7879_SPI) || defined(CONFIG_TOUCHSCREEN_AD7879_SPI_MODULE) +#define MAX_SPI_FREQ_HZ 5000000 +#define AD7879_CMD_MAGIC 0xE000 +#define AD7879_CMD_READ (1 << 10) +#define AD7879_WRITECMD(reg) (AD7879_CMD_MAGIC | (reg & 0xF)) +#define AD7879_READCMD(reg) (AD7879_CMD_MAGIC | AD7879_CMD_READ | (reg & 0xF)) + +struct ser_req { + u16 command; + u16 data; + struct spi_message msg; + struct spi_transfer xfer[2]; +}; + +/* + * ad7879_read/write are only used for initial setup and for sysfs controls. + * The main traffic is done in ad7879_collect(). + */ + +static int ad7879_read(struct spi_device *spi, u8 reg) +{ + struct ser_req *req; + int status, ret; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) AD7879_READCMD(reg); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + req->xfer[1].rx_buf = &req->data; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + ret = status ? : req->data; + + kfree(req); + + return ret; +} + +static int ad7879_write(struct spi_device *spi, u8 reg, u16 val) +{ + struct ser_req *req; + int status; + + req = kzalloc(sizeof *req, GFP_KERNEL); + if (!req) + return -ENOMEM; + + spi_message_init(&req->msg); + + req->command = (u16) AD7879_WRITECMD(reg); + req->xfer[0].tx_buf = &req->command; + req->xfer[0].len = 2; + + req->data = val; + req->xfer[1].tx_buf = &req->data; + req->xfer[1].len = 2; + + spi_message_add_tail(&req->xfer[0], &req->msg); + spi_message_add_tail(&req->xfer[1], &req->msg); + + status = spi_sync(spi, &req->msg); + + kfree(req); + + return status; +} + +static void ad7879_collect(struct ad7879 *ts) +{ + int status = spi_sync(ts->bus, &ts->msg); + + if (status) + dev_err(&ts->bus->dev, "spi_sync --> %d\n", status); +} + +static void ad7879_setup_ts_def_msg(struct ad7879 *ts) +{ + struct spi_message *m; + int i; + + ts->cmd = (u16) AD7879_READCMD(AD7879_REG_XPLUS); + + m = &ts->msg; + spi_message_init(m); + ts->xfer[0].tx_buf = &ts->cmd; + ts->xfer[0].len = 2; + + spi_message_add_tail(&ts->xfer[0], m); + + for (i = 0; i < AD7879_NR_SENSE; i++) { + ts->xfer[i + 1].rx_buf = &ts->conversion_data[i]; + ts->xfer[i + 1].len = 2; + spi_message_add_tail(&ts->xfer[i + 1], m); + } +} + +static int __devinit ad7879_probe(struct spi_device *spi) +{ + struct ad7879 *ts; + int error; + + /* don't exceed max specified SPI CLK frequency */ + if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) { + dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz); + return -EINVAL; + } + + ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + dev_set_drvdata(&spi->dev, ts); + ts->bus = spi; + + ad7879_setup_ts_def_msg(ts); + + error = ad7879_construct(spi, ts); + if (error) { + dev_set_drvdata(&spi->dev, NULL); + kfree(ts); + } + + return 0; +} + +static int __devexit ad7879_remove(struct spi_device *spi) +{ + struct ad7879 *ts = dev_get_drvdata(&spi->dev); + + ad7879_destroy(spi, ts); + dev_set_drvdata(&spi->dev, NULL); + kfree(ts); + + return 0; +} + +static struct spi_driver ad7879_driver = { + .driver = { + .name = "ad7879", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + .probe = ad7879_probe, + .remove = __devexit_p(ad7879_remove), + .suspend = ad7879_suspend, + .resume = ad7879_resume, +}; + +static int __init ad7879_init(void) +{ + return spi_register_driver(&ad7879_driver); +} +module_init(ad7879_init); + +static void __exit ad7879_exit(void) +{ + spi_unregister_driver(&ad7879_driver); +} +module_exit(ad7879_exit); + +#elif defined(CONFIG_TOUCHSCREEN_AD7879_I2C) || defined(CONFIG_TOUCHSCREEN_AD7879_I2C_MODULE) + +/* All registers are word-sized. + * AD7879 uses a high-byte first convention. + */ +static int ad7879_read(struct i2c_client *client, u8 reg) +{ + return swab16(i2c_smbus_read_word_data(client, reg)); +} + +static int ad7879_write(struct i2c_client *client, u8 reg, u16 val) +{ + return i2c_smbus_write_word_data(client, reg, swab16(val)); +} + +static void ad7879_collect(struct ad7879 *ts) +{ + int i; + + for (i = 0; i < AD7879_NR_SENSE; i++) + ts->conversion_data[i] = ad7879_read(ts->bus, + AD7879_REG_XPLUS + i); +} + +static int __devinit ad7879_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct ad7879 *ts; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_WORD_DATA)) { + dev_err(&client->dev, "SMBUS Word Data not Supported\n"); + return -EIO; + } + + ts = kzalloc(sizeof(struct ad7879), GFP_KERNEL); + if (!ts) + return -ENOMEM; + + i2c_set_clientdata(client, ts); + ts->bus = client; + + error = ad7879_construct(client, ts); + if (error) { + i2c_set_clientdata(client, NULL); + kfree(ts); + } + + return 0; +} + +static int __devexit ad7879_remove(struct i2c_client *client) +{ + struct ad7879 *ts = dev_get_drvdata(&client->dev); + + ad7879_destroy(client, ts); + i2c_set_clientdata(client, NULL); + kfree(ts); + + return 0; +} + +static const struct i2c_device_id ad7879_id[] = { + { "ad7879", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad7879_id); + +static struct i2c_driver ad7879_driver = { + .driver = { + .name = "ad7879", + .owner = THIS_MODULE, + }, + .probe = ad7879_probe, + .remove = __devexit_p(ad7879_remove), + .suspend = ad7879_suspend, + .resume = ad7879_resume, + .id_table = ad7879_id, +}; + +static int __init ad7879_init(void) +{ + return i2c_add_driver(&ad7879_driver); +} +module_init(ad7879_init); + +static void __exit ad7879_exit(void) +{ + i2c_del_driver(&ad7879_driver); +} +module_exit(ad7879_exit); +#endif + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 056ac77e2cf0..2b01e56568f8 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -127,6 +127,8 @@ struct ads7846 { void (*filter_cleanup)(void *data); int (*get_pendown_state)(void); int gpio_pendown; + + void (*wait_for_sync)(void); }; /* leave chip selected when we're done, for quicker re-select? */ @@ -511,6 +513,10 @@ static int get_pendown_state(struct ads7846 *ts) return !gpio_get_value(ts->gpio_pendown); } +static void null_wait_for_sync(void) +{ +} + /* * PENIRQ only kicks the timer. The timer only reissues the SPI transfer, * to retrieve touchscreen status. @@ -686,6 +692,7 @@ static void ads7846_rx_val(void *ads) default: BUG(); } + ts->wait_for_sync(); status = spi_async(ts->spi, m); if (status) dev_err(&ts->spi->dev, "spi_async --> %d\n", @@ -723,6 +730,7 @@ static enum hrtimer_restart ads7846_timer(struct hrtimer *handle) } else { /* pen is still down, continue with the measurement */ ts->msg_idx = 0; + ts->wait_for_sync(); status = spi_async(ts->spi, &ts->msg[0]); if (status) dev_err(&ts->spi->dev, "spi_async --> %d\n", status); @@ -746,7 +754,7 @@ static irqreturn_t ads7846_irq(int irq, void *handle) * that here. (The "generic irq" framework may help...) */ ts->irq_disabled = 1; - disable_irq(ts->spi->irq); + disable_irq_nosync(ts->spi->irq); ts->pending = 1; hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY), HRTIMER_MODE_REL); @@ -947,6 +955,8 @@ static int __devinit ads7846_probe(struct spi_device *spi) ts->penirq_recheck_delay_usecs = pdata->penirq_recheck_delay_usecs; + ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync; + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev)); input_dev->name = "ADS784x Touchscreen"; diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c index fa67d782c3c3..3ffd4c4b170c 100644 --- a/drivers/input/touchscreen/da9034-ts.c +++ b/drivers/input/touchscreen/da9034-ts.c @@ -3,6 +3,7 @@ * * Copyright (C) 2006-2008 Marvell International Ltd. * Fengwei Yin <fengwei.yin@marvell.com> + * Bin Yang <bin.yang@marvell.com> * Eric Miao <eric.miao@marvell.com> * * This program is free software; you can redistribute it and/or modify @@ -175,6 +176,16 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) goto err_reset; touch->state = STATE_STOP; + + /* FIXME: PEN_{UP/DOWN} events are expected to be + * available by stopping TSI, but this is found not + * always true, delay and simulate such an event + * here is more reliable + */ + mdelay(1); + da9034_event_handler(touch, + is_pen_down(touch) ? EVENT_PEN_DOWN : + EVENT_PEN_UP); break; case STATE_STOP: @@ -189,8 +200,6 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) report_pen_up(touch); touch->state = STATE_IDLE; } - - input_sync(touch->input_dev); break; case STATE_WAIT: @@ -200,8 +209,10 @@ static void da9034_event_handler(struct da9034_touch *touch, int event) if (is_pen_down(touch)) { start_tsi(touch); touch->state = STATE_BUSY; - } else + } else { + report_pen_up(touch); touch->state = STATE_IDLE; + } break; } return; @@ -226,16 +237,12 @@ static int da9034_touch_notifier(struct notifier_block *nb, struct da9034_touch *touch = container_of(nb, struct da9034_touch, notifier); - if (event & DA9034_EVENT_PEN_DOWN) { - if (is_pen_down(touch)) - da9034_event_handler(touch, EVENT_PEN_DOWN); - else - da9034_event_handler(touch, EVENT_PEN_UP); - } - if (event & DA9034_EVENT_TSI_READY) da9034_event_handler(touch, EVENT_TSI_READY); + if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE) + da9034_event_handler(touch, EVENT_PEN_DOWN); + return 0; } @@ -385,6 +392,6 @@ static void __exit da9034_touch_exit(void) module_exit(da9034_touch_exit); MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034"); -MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:da9034-touch"); diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c index 1d11e2be9ef8..4cc047a5116e 100644 --- a/drivers/input/touchscreen/mainstone-wm97xx.c +++ b/drivers/input/touchscreen/mainstone-wm97xx.c @@ -111,13 +111,12 @@ static void wm97xx_acc_pen_up(struct wm97xx *wm) #else static void wm97xx_acc_pen_up(struct wm97xx *wm) { - int count = 16; + unsigned int count; + schedule_timeout_uninterruptible(1); - while (count < 16) { + for (count = 0; count < 16; count++) MODR; - count--; - } } #endif @@ -162,6 +161,7 @@ static int wm97xx_acc_pen_down(struct wm97xx *wm) input_report_abs(wm->input_dev, ABS_X, x & 0xfff); input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, (p != 0)); input_sync(wm->input_dev); reads++; } while (reads < cinfo[sp_idx].reads); @@ -245,7 +245,7 @@ static void wm97xx_irq_enable(struct wm97xx *wm, int enable) if (enable) enable_irq(wm->pen_irq); else - disable_irq(wm->pen_irq); + disable_irq_nosync(wm->pen_irq); } static struct wm97xx_mach_ops mainstone_mach_ops = { diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c index 54986627def0..e868264fe799 100644 --- a/drivers/input/touchscreen/ucb1400_ts.c +++ b/drivers/input/touchscreen/ucb1400_ts.c @@ -151,12 +151,14 @@ static void ucb1400_ts_evt_add(struct input_dev *idev, u16 pressure, u16 x, u16 input_report_abs(idev, ABS_X, x); input_report_abs(idev, ABS_Y, y); input_report_abs(idev, ABS_PRESSURE, pressure); + input_report_key(idev, BTN_TOUCH, 1); input_sync(idev); } static void ucb1400_ts_event_release(struct input_dev *idev) { input_report_abs(idev, ABS_PRESSURE, 0); + input_report_key(idev, BTN_TOUCH, 0); input_sync(idev); } @@ -377,7 +379,8 @@ static int ucb1400_ts_probe(struct platform_device *dev) ucb->ts_idev->id.product = ucb->id; ucb->ts_idev->open = ucb1400_ts_open; ucb->ts_idev->close = ucb1400_ts_close; - ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS); + ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY); + ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); ucb1400_adc_enable(ucb->ac97); x_res = ucb1400_ts_read_xres(ucb); diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index d15aa11d7056..69af8385ab14 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -370,8 +370,7 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm) * provided. */ BUG_ON(!wm->mach_ops->irq_enable); - if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, - IRQF_SHARED | IRQF_SAMPLE_RANDOM, + if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED, "wm97xx-pen", wm)) { dev_err(wm->dev, "Failed to register pen down interrupt, polling"); @@ -409,6 +408,7 @@ static int wm97xx_read_samples(struct wm97xx *wm) wm->pen_is_down = 0; dev_dbg(wm->dev, "pen up\n"); input_report_abs(wm->input_dev, ABS_PRESSURE, 0); + input_report_key(wm->input_dev, BTN_TOUCH, 0); input_sync(wm->input_dev); } else if (!(rc & RC_AGAIN)) { /* We need high frequency updates only while @@ -433,6 +433,7 @@ static int wm97xx_read_samples(struct wm97xx *wm) input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff); input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff); input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, 1); input_sync(wm->input_dev); wm->pen_is_down = 1; wm->ts_reader_interval = wm->ts_reader_min_interval; @@ -628,18 +629,21 @@ static int wm97xx_probe(struct device *dev) wm->input_dev->phys = "wm97xx"; wm->input_dev->open = wm97xx_ts_input_open; wm->input_dev->close = wm97xx_ts_input_close; - set_bit(EV_ABS, wm->input_dev->evbit); - set_bit(ABS_X, wm->input_dev->absbit); - set_bit(ABS_Y, wm->input_dev->absbit); - set_bit(ABS_PRESSURE, wm->input_dev->absbit); + + __set_bit(EV_ABS, wm->input_dev->evbit); + __set_bit(EV_KEY, wm->input_dev->evbit); + __set_bit(BTN_TOUCH, wm->input_dev->keybit); + input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1], abs_x[2], 0); input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1], abs_y[2], 0); input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1], abs_p[2], 0); + input_set_drvdata(wm->input_dev, wm); wm->input_dev->dev.parent = dev; + ret = input_register_device(wm->input_dev); if (ret < 0) goto dev_alloc_err; diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c new file mode 100644 index 000000000000..41e4359c277c --- /dev/null +++ b/drivers/input/touchscreen/zylonite-wm97xx.c @@ -0,0 +1,240 @@ +/* + * zylonite-wm97xx.c -- Zylonite Continuous Touch screen driver + * + * Copyright 2004, 2007, 2008 Wolfson Microelectronics PLC. + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com> + * Parts Copyright : Ian Molton <spyro@f2s.com> + * Andrew Zabolotny <zap@homelink.ru> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Notes: + * This is a wm97xx extended touch driver supporting interrupt driven + * and continuous operation on Marvell Zylonite development systems + * (which have a WM9713 on board). + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/wm97xx.h> + +#include <mach/hardware.h> +#include <mach/mfp.h> +#include <mach/regs-ac97.h> + +struct continuous { + u16 id; /* codec id */ + u8 code; /* continuous code */ + u8 reads; /* number of coord reads per read cycle */ + u32 speed; /* number of coords per second */ +}; + +#define WM_READS(sp) ((sp / HZ) + 1) + +static const struct continuous cinfo[] = { + { WM9713_ID2, 0, WM_READS(94), 94 }, + { WM9713_ID2, 1, WM_READS(120), 120 }, + { WM9713_ID2, 2, WM_READS(154), 154 }, + { WM9713_ID2, 3, WM_READS(188), 188 }, +}; + +/* continuous speed index */ +static int sp_idx; + +/* + * Pen sampling frequency (Hz) in continuous mode. + */ +static int cont_rate = 200; +module_param(cont_rate, int, 0); +MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)"); + +/* + * Pressure readback. + * + * Set to 1 to read back pen down pressure + */ +static int pressure; +module_param(pressure, int, 0); +MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)"); + +/* + * AC97 touch data slot. + * + * Touch screen readback data ac97 slot + */ +static int ac97_touch_slot = 5; +module_param(ac97_touch_slot, int, 0); +MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number"); + + +/* flush AC97 slot 5 FIFO machines */ +static void wm97xx_acc_pen_up(struct wm97xx *wm) +{ + int i; + + msleep(1); + + for (i = 0; i < 16; i++) + MODR; +} + +static int wm97xx_acc_pen_down(struct wm97xx *wm) +{ + u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES; + int reads = 0; + static u16 last, tries; + + /* When the AC97 queue has been drained we need to allow time + * to buffer up samples otherwise we end up spinning polling + * for samples. The controller can't have a suitably low + * threashold set to use the notifications it gives. + */ + msleep(1); + + if (tries > 5) { + tries = 0; + return RC_PENUP; + } + + x = MODR; + if (x == last) { + tries++; + return RC_AGAIN; + } + last = x; + do { + if (reads) + x = MODR; + y = MODR; + if (pressure) + p = MODR; + + /* are samples valid */ + if ((x & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_X || + (y & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_Y || + (p & WM97XX_ADCSRC_MASK) != WM97XX_ADCSEL_PRES) + goto up; + + /* coordinate is good */ + tries = 0; + input_report_abs(wm->input_dev, ABS_X, x & 0xfff); + input_report_abs(wm->input_dev, ABS_Y, y & 0xfff); + input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff); + input_report_key(wm->input_dev, BTN_TOUCH, (p != 0)); + input_sync(wm->input_dev); + reads++; + } while (reads < cinfo[sp_idx].reads); +up: + return RC_PENDOWN | RC_AGAIN; +} + +static int wm97xx_acc_startup(struct wm97xx *wm) +{ + int idx; + + /* check we have a codec */ + if (wm->ac97 == NULL) + return -ENODEV; + + /* Go you big red fire engine */ + for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) { + if (wm->id != cinfo[idx].id) + continue; + sp_idx = idx; + if (cont_rate <= cinfo[idx].speed) + break; + } + wm->acc_rate = cinfo[sp_idx].code; + wm->acc_slot = ac97_touch_slot; + dev_info(wm->dev, + "zylonite accelerated touchscreen driver, %d samples/sec\n", + cinfo[sp_idx].speed); + + return 0; +} + +static void wm97xx_irq_enable(struct wm97xx *wm, int enable) +{ + if (enable) + enable_irq(wm->pen_irq); + else + disable_irq_nosync(wm->pen_irq); +} + +static struct wm97xx_mach_ops zylonite_mach_ops = { + .acc_enabled = 1, + .acc_pen_up = wm97xx_acc_pen_up, + .acc_pen_down = wm97xx_acc_pen_down, + .acc_startup = wm97xx_acc_startup, + .irq_enable = wm97xx_irq_enable, + .irq_gpio = WM97XX_GPIO_2, +}; + +static int zylonite_wm97xx_probe(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + int gpio_touch_irq; + + if (cpu_is_pxa320()) + gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15); + else + gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26); + + wm->pen_irq = IRQ_GPIO(gpio_touch_irq); + set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH); + + wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_STICKY, + WM97XX_GPIO_WAKE); + wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT, + WM97XX_GPIO_POL_HIGH, + WM97XX_GPIO_NOTSTICKY, + WM97XX_GPIO_NOWAKE); + + return wm97xx_register_mach_ops(wm, &zylonite_mach_ops); +} + +static int zylonite_wm97xx_remove(struct platform_device *pdev) +{ + struct wm97xx *wm = platform_get_drvdata(pdev); + + wm97xx_unregister_mach_ops(wm); + + return 0; +} + +static struct platform_driver zylonite_wm97xx_driver = { + .probe = zylonite_wm97xx_probe, + .remove = zylonite_wm97xx_remove, + .driver = { + .name = "wm97xx-touch", + }, +}; + +static int __init zylonite_wm97xx_init(void) +{ + return platform_driver_register(&zylonite_wm97xx_driver); +} + +static void __exit zylonite_wm97xx_exit(void) +{ + platform_driver_unregister(&zylonite_wm97xx_driver); +} + +module_init(zylonite_wm97xx_init); +module_exit(zylonite_wm97xx_exit); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("wm97xx continuous touch driver for Zylonite"); +MODULE_LICENSE("GPL"); |