diff options
Diffstat (limited to 'drivers/input')
80 files changed, 3764 insertions, 658 deletions
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig index 001b147c7f95..332597980817 100644 --- a/drivers/input/Kconfig +++ b/drivers/input/Kconfig @@ -25,6 +25,10 @@ config INPUT if INPUT +config INPUT_OF_MATRIX_KEYMAP + depends on USE_OF + bool + config INPUT_FF_MEMLESS tristate "Support for memoryless force-feedback devices" help diff --git a/drivers/input/Makefile b/drivers/input/Makefile index 0c789490e0b3..b173a13a73ca 100644 --- a/drivers/input/Makefile +++ b/drivers/input/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN) += touchscreen/ obj-$(CONFIG_INPUT_MISC) += misc/ obj-$(CONFIG_INPUT_APMPOWER) += apm-power.o +obj-$(CONFIG_INPUT_OF_MATRIX_KEYMAP) += of_keymap.o diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 7df5bfef2624..4b2e10d5d641 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -20,7 +20,7 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/init.h> -#include <linux/input.h> +#include <linux/input/mt.h> #include <linux/major.h> #include <linux/device.h> #include "input-compat.h" @@ -46,6 +46,7 @@ struct evdev_client { struct fasync_struct *fasync; struct evdev *evdev; struct list_head node; + int clkid; unsigned int bufsize; struct input_event buffer[]; }; @@ -54,8 +55,12 @@ static struct evdev *evdev_table[EVDEV_MINORS]; static DEFINE_MUTEX(evdev_table_mutex); static void evdev_pass_event(struct evdev_client *client, - struct input_event *event) + struct input_event *event, + ktime_t mono, ktime_t real) { + event->time = ktime_to_timeval(client->clkid == CLOCK_MONOTONIC ? + mono : real); + /* Interrupts are disabled, just acquire the lock. */ spin_lock(&client->buffer_lock); @@ -94,8 +99,11 @@ static void evdev_event(struct input_handle *handle, struct evdev *evdev = handle->private; struct evdev_client *client; struct input_event event; + ktime_t time_mono, time_real; + + time_mono = ktime_get(); + time_real = ktime_sub(time_mono, ktime_get_monotonic_offset()); - do_gettimeofday(&event.time); event.type = type; event.code = code; event.value = value; @@ -103,11 +111,12 @@ static void evdev_event(struct input_handle *handle, rcu_read_lock(); client = rcu_dereference(evdev->grab); + if (client) - evdev_pass_event(client, &event); + evdev_pass_event(client, &event, time_mono, time_real); else list_for_each_entry_rcu(client, &evdev->client_list, node) - evdev_pass_event(client, &event); + evdev_pass_event(client, &event, time_mono, time_real); rcu_read_unlock(); @@ -623,6 +632,28 @@ static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p) return input_set_keycode(dev, &ke); } +static int evdev_handle_mt_request(struct input_dev *dev, + unsigned int size, + int __user *ip) +{ + const struct input_mt_slot *mt = dev->mt; + unsigned int code; + int max_slots; + int i; + + if (get_user(code, &ip[0])) + return -EFAULT; + if (!input_is_mt_value(code)) + return -EINVAL; + + max_slots = (size - sizeof(__u32)) / sizeof(__s32); + for (i = 0; i < dev->mtsize && i < max_slots; i++) + if (put_user(input_mt_get_value(&mt[i], code), &ip[1 + i])) + return -EFAULT; + + return 0; +} + static long evdev_do_ioctl(struct file *file, unsigned int cmd, void __user *p, int compat_mode) { @@ -685,6 +716,14 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, else return evdev_ungrab(evdev, client); + case EVIOCSCLOCKID: + if (copy_from_user(&i, p, sizeof(unsigned int))) + return -EFAULT; + if (i != CLOCK_MONOTONIC && i != CLOCK_REALTIME) + return -EINVAL; + client->clkid = i; + return 0; + case EVIOCGKEYCODE: return evdev_handle_get_keycode(dev, p); @@ -708,6 +747,9 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, return bits_to_user(dev->propbit, INPUT_PROP_MAX, size, p, compat_mode); + case EVIOCGMTSLOTS(0): + return evdev_handle_mt_request(dev, size, ip); + case EVIOCGKEY(0): return bits_to_user(dev->key, KEY_MAX, size, p, compat_mode); diff --git a/drivers/input/input.c b/drivers/input/input.c index 1f78c957a75a..8921c6180c51 100644 --- a/drivers/input/input.c +++ b/drivers/input/input.c @@ -180,7 +180,7 @@ static int input_handle_abs_event(struct input_dev *dev, return INPUT_IGNORE_EVENT; } - is_mt_event = code >= ABS_MT_FIRST && code <= ABS_MT_LAST; + is_mt_event = input_is_mt_value(code); if (!is_mt_event) { pold = &dev->absinfo[code].value; diff --git a/drivers/input/joystick/as5011.c b/drivers/input/joystick/as5011.c index 6d6e7418dc21..3063464474bf 100644 --- a/drivers/input/joystick/as5011.c +++ b/drivers/input/joystick/as5011.c @@ -355,14 +355,4 @@ static struct i2c_driver as5011_driver = { .id_table = as5011_id, }; -static int __init as5011_init(void) -{ - return i2c_add_driver(&as5011_driver); -} -module_init(as5011_init); - -static void __exit as5011_exit(void) -{ - i2c_del_driver(&as5011_driver); -} -module_exit(as5011_exit); +module_i2c_driver(as5011_driver); diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index cdc385b2cf7d..f354813a13e8 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -394,6 +394,7 @@ config KEYBOARD_NOMADIK config KEYBOARD_TEGRA tristate "NVIDIA Tegra internal matrix keyboard controller support" depends on ARCH_TEGRA + select INPUT_OF_MATRIX_KEYMAP if USE_OF help Say Y here if you want to use a matrix keyboard connected directly to the internal keyboard controller on Tegra SoCs. @@ -512,7 +513,6 @@ config KEYBOARD_OMAP config KEYBOARD_OMAP4 tristate "TI OMAP4 keypad support" - depends on ARCH_OMAP4 help Say Y here if you want to use the OMAP4 keypad. diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 4a7f534cf64b..39ebffac207e 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -653,17 +653,7 @@ static struct i2c_driver adp5588_driver = { .id_table = adp5588_id, }; -static int __init adp5588_init(void) -{ - return i2c_add_driver(&adp5588_driver); -} -module_init(adp5588_init); - -static void __exit adp5588_exit(void) -{ - i2c_del_driver(&adp5588_driver); -} -module_exit(adp5588_exit); +module_i2c_driver(adp5588_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c index 02b5d53031bf..74e603213386 100644 --- a/drivers/input/keyboard/adp5589-keys.c +++ b/drivers/input/keyboard/adp5589-keys.c @@ -1108,17 +1108,7 @@ static struct i2c_driver adp5589_driver = { .id_table = adp5589_id, }; -static int __init adp5589_init(void) -{ - return i2c_add_driver(&adp5589_driver); -} -module_init(adp5589_init); - -static void __exit adp5589_exit(void) -{ - i2c_del_driver(&adp5589_driver); -} -module_exit(adp5589_exit); +module_i2c_driver(adp5589_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c index 21823bfc7911..39ac2787e275 100644 --- a/drivers/input/keyboard/lm8323.c +++ b/drivers/input/keyboard/lm8323.c @@ -851,17 +851,7 @@ static struct i2c_driver lm8323_i2c_driver = { }; MODULE_DEVICE_TABLE(i2c, lm8323_id); -static int __init lm8323_init(void) -{ - return i2c_add_driver(&lm8323_i2c_driver); -} -module_init(lm8323_init); - -static void __exit lm8323_exit(void) -{ - i2c_del_driver(&lm8323_i2c_driver); -} -module_exit(lm8323_exit); +module_i2c_driver(lm8323_i2c_driver); MODULE_AUTHOR("Timo O. Karjalainen <timo.o.karjalainen@nokia.com>"); MODULE_AUTHOR("Daniel Stone"); diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c index 5afe35ad24d3..8edada8ae712 100644 --- a/drivers/input/keyboard/max7359_keypad.c +++ b/drivers/input/keyboard/max7359_keypad.c @@ -316,17 +316,7 @@ static struct i2c_driver max7359_i2c_driver = { .id_table = max7359_ids, }; -static int __init max7359_init(void) -{ - return i2c_add_driver(&max7359_i2c_driver); -} -module_init(max7359_init); - -static void __exit max7359_exit(void) -{ - i2c_del_driver(&max7359_i2c_driver); -} -module_exit(max7359_exit); +module_i2c_driver(max7359_i2c_driver); MODULE_AUTHOR("Kim Kyuwon <q1.kim@samsung.com>"); MODULE_DESCRIPTION("MAX7359 Key Switch Controller Driver"); diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c index af1aab324a4c..64a0ca4c92f3 100644 --- a/drivers/input/keyboard/mcs_touchkey.c +++ b/drivers/input/keyboard/mcs_touchkey.c @@ -274,18 +274,7 @@ static struct i2c_driver mcs_touchkey_driver = { .id_table = mcs_touchkey_id, }; -static int __init mcs_touchkey_init(void) -{ - return i2c_add_driver(&mcs_touchkey_driver); -} - -static void __exit mcs_touchkey_exit(void) -{ - i2c_del_driver(&mcs_touchkey_driver); -} - -module_init(mcs_touchkey_init); -module_exit(mcs_touchkey_exit); +module_i2c_driver(mcs_touchkey_driver); /* Module information */ MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); diff --git a/drivers/input/keyboard/mpr121_touchkey.c b/drivers/input/keyboard/mpr121_touchkey.c index 1c1615d9a7f9..caa218a51b5a 100644 --- a/drivers/input/keyboard/mpr121_touchkey.c +++ b/drivers/input/keyboard/mpr121_touchkey.c @@ -330,17 +330,7 @@ static struct i2c_driver mpr_touchkey_driver = { .remove = __devexit_p(mpr_touchkey_remove), }; -static int __init mpr_touchkey_init(void) -{ - return i2c_add_driver(&mpr_touchkey_driver); -} -module_init(mpr_touchkey_init); - -static void __exit mpr_touchkey_exit(void) -{ - i2c_del_driver(&mpr_touchkey_driver); -} -module_exit(mpr_touchkey_exit); +module_i2c_driver(mpr_touchkey_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>"); diff --git a/drivers/input/keyboard/nomadik-ske-keypad.c b/drivers/input/keyboard/nomadik-ske-keypad.c index e35566aa102f..101e245944e7 100644 --- a/drivers/input/keyboard/nomadik-ske-keypad.c +++ b/drivers/input/keyboard/nomadik-ske-keypad.c @@ -88,7 +88,7 @@ static void ske_keypad_set_bits(struct ske_keypad *keypad, u16 addr, * * Enable Multi key press detection, auto scan mode */ -static int __devinit ske_keypad_chip_init(struct ske_keypad *keypad) +static int __init ske_keypad_chip_init(struct ske_keypad *keypad) { u32 value; int timeout = 50; @@ -198,7 +198,7 @@ static irqreturn_t ske_keypad_irq(int irq, void *dev_id) return IRQ_HANDLED; } -static int __devinit ske_keypad_probe(struct platform_device *pdev) +static int __init ske_keypad_probe(struct platform_device *pdev) { const struct ske_keypad_platform_data *plat = pdev->dev.platform_data; struct ske_keypad *keypad; @@ -344,7 +344,7 @@ static int __devexit ske_keypad_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int ske_keypad_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -372,22 +372,17 @@ static int ske_keypad_resume(struct device *dev) return 0; } - -static const struct dev_pm_ops ske_keypad_dev_pm_ops = { - .suspend = ske_keypad_suspend, - .resume = ske_keypad_resume, -}; #endif +static SIMPLE_DEV_PM_OPS(ske_keypad_dev_pm_ops, + ske_keypad_suspend, ske_keypad_resume); + static struct platform_driver ske_keypad_driver = { .driver = { .name = "nmk-ske-keypad", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &ske_keypad_dev_pm_ops, -#endif }, - .probe = ske_keypad_probe, .remove = __devexit_p(ske_keypad_remove), }; diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index d5c5d77f4b82..e809ac095a38 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -31,7 +31,7 @@ #include <linux/slab.h> #include <linux/pm_runtime.h> -#include <plat/omap4-keypad.h> +#include <linux/platform_data/omap4-keypad.h> /* OMAP4 registers */ #define OMAP4_KBD_REVISION 0x00 diff --git a/drivers/input/keyboard/qt1070.c b/drivers/input/keyboard/qt1070.c index b21bf5b876bb..0b7b2f891752 100644 --- a/drivers/input/keyboard/qt1070.c +++ b/drivers/input/keyboard/qt1070.c @@ -258,17 +258,7 @@ static struct i2c_driver qt1070_driver = { .remove = __devexit_p(qt1070_remove), }; -static int __init qt1070_init(void) -{ - return i2c_add_driver(&qt1070_driver); -} -module_init(qt1070_init); - -static void __exit qt1070_exit(void) -{ - i2c_del_driver(&qt1070_driver); -} -module_exit(qt1070_exit); +module_i2c_driver(qt1070_driver); MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>"); MODULE_DESCRIPTION("Driver for AT42QT1070 QTouch sensor"); diff --git a/drivers/input/keyboard/qt2160.c b/drivers/input/keyboard/qt2160.c index fac695157e8a..e7a5e36e1203 100644 --- a/drivers/input/keyboard/qt2160.c +++ b/drivers/input/keyboard/qt2160.c @@ -379,17 +379,7 @@ static struct i2c_driver qt2160_driver = { .remove = __devexit_p(qt2160_remove), }; -static int __init qt2160_init(void) -{ - return i2c_add_driver(&qt2160_driver); -} -module_init(qt2160_init); - -static void __exit qt2160_cleanup(void) -{ - i2c_del_driver(&qt2160_driver); -} -module_exit(qt2160_cleanup); +module_i2c_driver(qt2160_driver); MODULE_AUTHOR("Raphael Derosso Pereira <raphaelpereira@gmail.com>"); MODULE_DESCRIPTION("Driver for AT42QT2160 Touch Sensor"); diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c index 17ba7f9f80f3..2391ae884fee 100644 --- a/drivers/input/keyboard/samsung-keypad.c +++ b/drivers/input/keyboard/samsung-keypad.c @@ -175,7 +175,7 @@ static irqreturn_t samsung_keypad_irq(int irq, void *dev_id) } while (key_down && !keypad->stopped); - pm_runtime_put_sync(&keypad->pdev->dev); + pm_runtime_put(&keypad->pdev->dev); return IRQ_HANDLED; } @@ -199,7 +199,7 @@ static void samsung_keypad_start(struct samsung_keypad *keypad) /* KEYIFCOL reg clear. */ writel(0, keypad->base + SAMSUNG_KEYIFCOL); - pm_runtime_put_sync(&keypad->pdev->dev); + pm_runtime_put(&keypad->pdev->dev); } static void samsung_keypad_stop(struct samsung_keypad *keypad) @@ -229,7 +229,7 @@ static void samsung_keypad_stop(struct samsung_keypad *keypad) */ enable_irq(keypad->irq); - pm_runtime_put_sync(&keypad->pdev->dev); + pm_runtime_put(&keypad->pdev->dev); } static int samsung_keypad_open(struct input_dev *input_dev) diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c index c88bd63dc9cc..3b6b528f02fd 100644 --- a/drivers/input/keyboard/spear-keyboard.c +++ b/drivers/input/keyboard/spear-keyboard.c @@ -50,6 +50,7 @@ #define ROW_MASK 0xF0 #define COLUMN_MASK 0x0F #define ROW_SHIFT 4 +#define KEY_MATRIX_SHIFT 6 struct spear_kbd { struct input_dev *input; @@ -57,6 +58,7 @@ struct spear_kbd { void __iomem *io_base; struct clk *clk; unsigned int irq; + unsigned int mode; unsigned short last_key; unsigned short keycodes[256]; }; @@ -106,7 +108,8 @@ static int spear_kbd_open(struct input_dev *dev) return error; /* program keyboard */ - val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK; + val = SCAN_RATE_80 | MODE_KEYBOARD | PCLK_FREQ_MSK | + (kbd->mode << KEY_MATRIX_SHIFT); writew(val, kbd->io_base + MODE_REG); writeb(1, kbd->io_base + STATUS_REG); @@ -176,6 +179,8 @@ static int __devinit spear_kbd_probe(struct platform_device *pdev) kbd->input = input_dev; kbd->irq = irq; + kbd->mode = pdata->mode; + kbd->res = request_mem_region(res->start, resource_size(res), pdev->name); if (!kbd->res) { @@ -308,22 +313,17 @@ static int spear_kbd_resume(struct device *dev) return 0; } - -static const struct dev_pm_ops spear_kbd_pm_ops = { - .suspend = spear_kbd_suspend, - .resume = spear_kbd_resume, -}; #endif +static SIMPLE_DEV_PM_OPS(spear_kbd_pm_ops, spear_kbd_suspend, spear_kbd_resume); + static struct platform_driver spear_kbd_driver = { .probe = spear_kbd_probe, .remove = __devexit_p(spear_kbd_remove), .driver = { .name = "keyboard", .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &spear_kbd_pm_ops, -#endif }, }; module_platform_driver(spear_kbd_driver); diff --git a/drivers/input/keyboard/tegra-kbc.c b/drivers/input/keyboard/tegra-kbc.c index a136e2e832be..21c42f852343 100644 --- a/drivers/input/keyboard/tegra-kbc.c +++ b/drivers/input/keyboard/tegra-kbc.c @@ -48,6 +48,7 @@ #define KBC_FIFO_TH_CNT_SHIFT(cnt) (cnt << 14) #define KBC_DEBOUNCE_CNT_SHIFT(cnt) (cnt << 4) #define KBC_CONTROL_FIFO_CNT_INT_EN (1 << 3) +#define KBC_CONTROL_KEYPRESS_INT_EN (1 << 1) #define KBC_CONTROL_KBC_EN (1 << 0) /* KBC Interrupt Register */ @@ -356,6 +357,18 @@ static void tegra_kbc_set_fifo_interrupt(struct tegra_kbc *kbc, bool enable) writel(val, kbc->mmio + KBC_CONTROL_0); } +static void tegra_kbc_set_keypress_interrupt(struct tegra_kbc *kbc, bool enable) +{ + u32 val; + + val = readl(kbc->mmio + KBC_CONTROL_0); + if (enable) + val |= KBC_CONTROL_KEYPRESS_INT_EN; + else + val &= ~KBC_CONTROL_KEYPRESS_INT_EN; + writel(val, kbc->mmio + KBC_CONTROL_0); +} + static void tegra_kbc_keypress_timer(unsigned long data) { struct tegra_kbc *kbc = (struct tegra_kbc *)data; @@ -455,10 +468,18 @@ static void tegra_kbc_config_pins(struct tegra_kbc *kbc) row_cfg &= ~r_mask; col_cfg &= ~c_mask; - if (pdata->pin_cfg[i].is_row) + switch (pdata->pin_cfg[i].type) { + case PIN_CFG_ROW: row_cfg |= ((pdata->pin_cfg[i].num << 1) | 1) << r_shft; - else + break; + + case PIN_CFG_COL: col_cfg |= ((pdata->pin_cfg[i].num << 1) | 1) << c_shft; + break; + + case PIN_CFG_IGNORE: + break; + } writel(row_cfg, kbc->mmio + r_offs); writel(col_cfg, kbc->mmio + c_offs); @@ -563,7 +584,8 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata, for (i = 0; i < KBC_MAX_GPIO; i++) { const struct tegra_kbc_pin_cfg *pin_cfg = &pdata->pin_cfg[i]; - if (pin_cfg->is_row) { + switch (pin_cfg->type) { + case PIN_CFG_ROW: if (pin_cfg->num >= KBC_MAX_ROW) { dev_err(dev, "pin_cfg[%d]: invalid row number %d\n", @@ -571,13 +593,25 @@ tegra_kbc_check_pin_cfg(const struct tegra_kbc_platform_data *pdata, return false; } (*num_rows)++; - } else { + break; + + case PIN_CFG_COL: if (pin_cfg->num >= KBC_MAX_COL) { dev_err(dev, "pin_cfg[%d]: invalid column number %d\n", i, pin_cfg->num); return false; } + break; + + case PIN_CFG_IGNORE: + break; + + default: + dev_err(dev, + "pin_cfg[%d]: invalid entry type %d\n", + pin_cfg->type, pin_cfg->num); + return false; } } @@ -590,24 +624,25 @@ tegra_kbc_dt_parse_pdata(struct platform_device *pdev) { struct tegra_kbc_platform_data *pdata; struct device_node *np = pdev->dev.of_node; + u32 prop; + int i; if (!np) return NULL; - pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); if (!pdata) return NULL; - if (!of_property_read_u32(np, "debounce-delay", &prop)) + if (!of_property_read_u32(np, "nvidia,debounce-delay-ms", &prop)) pdata->debounce_cnt = prop; - if (!of_property_read_u32(np, "repeat-delay", &prop)) + if (!of_property_read_u32(np, "nvidia,repeat-delay-ms", &prop)) pdata->repeat_cnt = prop; - if (of_find_property(np, "needs-ghost-filter", NULL)) + if (of_find_property(np, "nvidia,needs-ghost-filter", NULL)) pdata->use_ghost_filter = true; - if (of_find_property(np, "wakeup-source", NULL)) + if (of_find_property(np, "nvidia,wakeup-source", NULL)) pdata->wakeup = true; /* @@ -616,14 +651,18 @@ tegra_kbc_dt_parse_pdata(struct platform_device *pdev) */ for (i = 0; i < KBC_MAX_ROW; i++) { pdata->pin_cfg[i].num = i; - pdata->pin_cfg[i].is_row = true; + pdata->pin_cfg[i].type = PIN_CFG_ROW; } for (i = 0; i < KBC_MAX_COL; i++) { pdata->pin_cfg[KBC_MAX_ROW + i].num = i; - pdata->pin_cfg[KBC_MAX_ROW + i].is_row = false; + pdata->pin_cfg[KBC_MAX_ROW + i].type = PIN_CFG_COL; } + pdata->keymap_data = matrix_keyboard_of_fill_keymap(np, "linux,keymap"); + + /* FIXME: Add handling of linux,fn-keymap here */ + return pdata; } #else @@ -759,6 +798,9 @@ static int __devinit tegra_kbc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, kbc); device_init_wakeup(&pdev->dev, pdata->wakeup); + if (!pdev->dev.platform_data) + matrix_keyboard_of_free_keymap(pdata->keymap_data); + return 0; err_free_irq: @@ -773,8 +815,10 @@ err_free_mem: input_free_device(input_dev); kfree(kbc); err_free_pdata: - if (!pdev->dev.platform_data) + if (!pdev->dev.platform_data) { + matrix_keyboard_of_free_keymap(pdata->keymap_data); kfree(pdata); + } return err; } @@ -831,6 +875,8 @@ static int tegra_kbc_suspend(struct device *dev) msleep(30); kbc->keypress_caused_wake = false; + /* Enable keypress interrupt before going into suspend. */ + tegra_kbc_set_keypress_interrupt(kbc, true); enable_irq(kbc->irq); enable_irq_wake(kbc->irq); } else { @@ -852,6 +898,8 @@ static int tegra_kbc_resume(struct device *dev) if (device_may_wakeup(&pdev->dev)) { disable_irq_wake(kbc->irq); tegra_kbc_setup_wakekeys(kbc, false); + /* We will use fifo interrupts for key detection. */ + tegra_kbc_set_keypress_interrupt(kbc, false); /* Restore the resident time of continuous polling mode. */ writel(kbc->cp_to_wkup_dly, kbc->mmio + KBC_TO_CNT_0); diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7b46781c30c9..2d787796bf50 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -134,6 +134,18 @@ config INPUT_MAX8925_ONKEY To compile this driver as a module, choose M here: the module will be called max8925_onkey. +config INPUT_MAX8997_HAPTIC + tristate "MAXIM MAX8997 haptic controller support" + depends on HAVE_PWM && MFD_MAX8997 + select INPUT_FF_MEMLESS + help + This option enables device driver support for the haptic controller + on MAXIM MAX8997 chip. This driver supports ff-memless interface + from input framework. + + To compile this driver as module, choose M here: the + module will be called max8997-haptic. + config INPUT_MC13783_PWRBUTTON tristate "MC13783 ON buttons" depends on MFD_MC13783 @@ -415,7 +427,7 @@ config INPUT_PCF8574 tristate "PCF8574 Keypad input device" depends on I2C && EXPERIMENTAL help - Say Y here if you want to support a keypad connetced via I2C + Say Y here if you want to support a keypad connected via I2C with a PCF8574. To compile this driver as a module, choose M here: the @@ -455,6 +467,16 @@ config INPUT_RB532_BUTTON To compile this driver as a module, choose M here: the module will be called rb532_button. +config INPUT_DA9052_ONKEY + tristate "Dialog DA9052/DA9053 Onkey" + depends on PMIC_DA9052 + help + Support the ONKEY of Dialog DA9052 PMICs as an input device + reporting power button status. + + To compile this driver as a module, choose M here: the + module will be called da9052_onkey. + config INPUT_DM355EVM tristate "TI DaVinci DM355 EVM Keypad and IR Remote" depends on MFD_DM355EVM_MSP @@ -558,7 +580,7 @@ config INPUT_CMA3000_I2C config INPUT_XEN_KBDDEV_FRONTEND tristate "Xen virtual keyboard and mouse support" - depends on XEN_FBDEV_FRONTEND + depends on XEN default y select XEN_XENBUS_FRONTEND help diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 46671a875b91..f55cdf4916fa 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_INPUT_CM109) += cm109.o obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o +obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o @@ -30,6 +31,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o +obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o obj-$(CONFIG_INPUT_MMA8450) += mma8450.o obj-$(CONFIG_INPUT_MPU3050) += mpu3050.o diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c index 56810fb4eadd..c8a79015472a 100644 --- a/drivers/input/misc/ad714x-i2c.c +++ b/drivers/input/misc/ad714x-i2c.c @@ -116,17 +116,7 @@ static struct i2c_driver ad714x_i2c_driver = { .id_table = ad714x_id, }; -static int __init ad714x_i2c_init(void) -{ - return i2c_add_driver(&ad714x_i2c_driver); -} -module_init(ad714x_i2c_init); - -static void __exit ad714x_i2c_exit(void) -{ - i2c_del_driver(&ad714x_i2c_driver); -} -module_exit(ad714x_i2c_exit); +module_i2c_driver(ad714x_i2c_driver); MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver"); MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c index 875b50811361..75f6136d608e 100644 --- a/drivers/input/misc/ad714x-spi.c +++ b/drivers/input/misc/ad714x-spi.c @@ -123,17 +123,7 @@ static struct spi_driver ad714x_spi_driver = { .remove = __devexit_p(ad714x_spi_remove), }; -static __init int ad714x_spi_init(void) -{ - return spi_register_driver(&ad714x_spi_driver); -} -module_init(ad714x_spi_init); - -static __exit void ad714x_spi_exit(void) -{ - spi_unregister_driver(&ad714x_spi_driver); -} -module_exit(ad714x_spi_exit); +module_spi_driver(ad714x_spi_driver); MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver"); MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); diff --git a/drivers/input/misc/adxl34x-i2c.c b/drivers/input/misc/adxl34x-i2c.c index ccacf2bb06a4..dd1d1c145a7f 100644 --- a/drivers/input/misc/adxl34x-i2c.c +++ b/drivers/input/misc/adxl34x-i2c.c @@ -148,17 +148,7 @@ static struct i2c_driver adxl34x_driver = { .id_table = adxl34x_id, }; -static int __init adxl34x_i2c_init(void) -{ - return i2c_add_driver(&adxl34x_driver); -} -module_init(adxl34x_i2c_init); - -static void __exit adxl34x_i2c_exit(void) -{ - i2c_del_driver(&adxl34x_driver); -} -module_exit(adxl34x_i2c_exit); +module_i2c_driver(adxl34x_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer I2C Bus Driver"); diff --git a/drivers/input/misc/adxl34x-spi.c b/drivers/input/misc/adxl34x-spi.c index 34d401efd4a1..820a802a1e6e 100644 --- a/drivers/input/misc/adxl34x-spi.c +++ b/drivers/input/misc/adxl34x-spi.c @@ -129,17 +129,7 @@ static struct spi_driver adxl34x_driver = { .remove = __devexit_p(adxl34x_spi_remove), }; -static int __init adxl34x_spi_init(void) -{ - return spi_register_driver(&adxl34x_driver); -} -module_init(adxl34x_spi_init); - -static void __exit adxl34x_spi_exit(void) -{ - spi_unregister_driver(&adxl34x_driver); -} -module_exit(adxl34x_spi_exit); +module_spi_driver(adxl34x_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("ADXL345/346 Three-Axis Digital Accelerometer SPI Bus Driver"); diff --git a/drivers/input/misc/bma150.c b/drivers/input/misc/bma150.c index 8f55b54352b6..e2f1e9f952b1 100644 --- a/drivers/input/misc/bma150.c +++ b/drivers/input/misc/bma150.c @@ -673,19 +673,8 @@ static struct i2c_driver bma150_driver = { .remove = __devexit_p(bma150_remove), }; -static int __init BMA150_init(void) -{ - return i2c_add_driver(&bma150_driver); -} - -static void __exit BMA150_exit(void) -{ - i2c_del_driver(&bma150_driver); -} +module_i2c_driver(bma150_driver); MODULE_AUTHOR("Albert Zhang <xu.zhang@bosch-sensortec.com>"); MODULE_DESCRIPTION("BMA150 driver"); MODULE_LICENSE("GPL"); - -module_init(BMA150_init); -module_exit(BMA150_exit); diff --git a/drivers/input/misc/cma3000_d0x_i2c.c b/drivers/input/misc/cma3000_d0x_i2c.c index d100cc5c5783..fe9b85f07792 100644 --- a/drivers/input/misc/cma3000_d0x_i2c.c +++ b/drivers/input/misc/cma3000_d0x_i2c.c @@ -125,18 +125,7 @@ static struct i2c_driver cma3000_i2c_driver = { }, }; -static int __init cma3000_i2c_init(void) -{ - return i2c_add_driver(&cma3000_i2c_driver); -} - -static void __exit cma3000_i2c_exit(void) -{ - i2c_del_driver(&cma3000_i2c_driver); -} - -module_init(cma3000_i2c_init); -module_exit(cma3000_i2c_exit); +module_i2c_driver(cma3000_i2c_driver); MODULE_DESCRIPTION("CMA3000-D0x Accelerometer I2C Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c new file mode 100644 index 000000000000..34aebb8cd080 --- /dev/null +++ b/drivers/input/misc/da9052_onkey.c @@ -0,0 +1,169 @@ +/* + * ON pin driver for Dialog DA9052 PMICs + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen <dchen@diasemi.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/input.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> + +#include <linux/mfd/da9052/da9052.h> +#include <linux/mfd/da9052/reg.h> + +struct da9052_onkey { + struct da9052 *da9052; + struct input_dev *input; + struct delayed_work work; + unsigned int irq; +}; + +static void da9052_onkey_query(struct da9052_onkey *onkey) +{ + int key_stat; + + key_stat = da9052_reg_read(onkey->da9052, DA9052_EVENT_B_REG); + if (key_stat < 0) { + dev_err(onkey->da9052->dev, + "Failed to read onkey event %d\n", key_stat); + } else { + /* + * Since interrupt for deassertion of ONKEY pin is not + * generated, onkey event state determines the onkey + * button state. + */ + key_stat &= DA9052_EVENTB_ENONKEY; + input_report_key(onkey->input, KEY_POWER, key_stat); + input_sync(onkey->input); + } + + /* + * Interrupt is generated only when the ONKEY pin is asserted. + * Hence the deassertion of the pin is simulated through work queue. + */ + if (key_stat) + schedule_delayed_work(&onkey->work, msecs_to_jiffies(50)); +} + +static void da9052_onkey_work(struct work_struct *work) +{ + struct da9052_onkey *onkey = container_of(work, struct da9052_onkey, + work.work); + + da9052_onkey_query(onkey); +} + +static irqreturn_t da9052_onkey_irq(int irq, void *data) +{ + struct da9052_onkey *onkey = data; + + da9052_onkey_query(onkey); + + return IRQ_HANDLED; +} + +static int __devinit da9052_onkey_probe(struct platform_device *pdev) +{ + struct da9052 *da9052 = dev_get_drvdata(pdev->dev.parent); + struct da9052_onkey *onkey; + struct input_dev *input_dev; + int irq; + int error; + + if (!da9052) { + dev_err(&pdev->dev, "Failed to get the driver's data\n"); + return -EINVAL; + } + + irq = platform_get_irq_byname(pdev, "ONKEY"); + if (irq < 0) { + dev_err(&pdev->dev, + "Failed to get an IRQ for input device, %d\n", irq); + return -EINVAL; + } + + onkey = kzalloc(sizeof(*onkey), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!onkey || !input_dev) { + dev_err(&pdev->dev, "Failed to allocate memory\n"); + return -ENOMEM; + } + + onkey->input = input_dev; + onkey->da9052 = da9052; + onkey->irq = irq; + INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work); + + input_dev->name = "da9052-onkey"; + input_dev->phys = "da9052-onkey/input0"; + input_dev->dev.parent = &pdev->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY); + __set_bit(KEY_POWER, input_dev->keybit); + + error = request_threaded_irq(onkey->irq, NULL, da9052_onkey_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "ONKEY", onkey); + if (error < 0) { + dev_err(onkey->da9052->dev, + "Failed to register ONKEY IRQ %d, error = %d\n", + onkey->irq, error); + goto err_free_mem; + } + + error = input_register_device(onkey->input); + if (error) { + dev_err(&pdev->dev, "Unable to register input device, %d\n", + error); + goto err_free_irq; + } + + platform_set_drvdata(pdev, onkey); + return 0; + +err_free_irq: + free_irq(onkey->irq, onkey); + cancel_delayed_work_sync(&onkey->work); +err_free_mem: + input_free_device(input_dev); + kfree(onkey); + + return error; +} + +static int __devexit da9052_onkey_remove(struct platform_device *pdev) +{ + struct da9052_onkey *onkey = platform_get_drvdata(pdev); + + free_irq(onkey->irq, onkey); + cancel_delayed_work_sync(&onkey->work); + + input_unregister_device(onkey->input); + kfree(onkey); + + return 0; +} + +static struct platform_driver da9052_onkey_driver = { + .probe = da9052_onkey_probe, + .remove = __devexit_p(da9052_onkey_remove), + .driver = { + .name = "da9052-onkey", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(da9052_onkey_driver); + +MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>"); +MODULE_DESCRIPTION("Onkey driver for DA9052"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-onkey"); diff --git a/drivers/input/misc/gp2ap002a00f.c b/drivers/input/misc/gp2ap002a00f.c index 71fba8c2fc66..b6664cfa340a 100644 --- a/drivers/input/misc/gp2ap002a00f.c +++ b/drivers/input/misc/gp2ap002a00f.c @@ -281,18 +281,7 @@ static struct i2c_driver gp2a_i2c_driver = { .id_table = gp2a_i2c_id, }; -static int __init gp2a_init(void) -{ - return i2c_add_driver(&gp2a_i2c_driver); -} - -static void __exit gp2a_exit(void) -{ - i2c_del_driver(&gp2a_i2c_driver); -} - -module_init(gp2a_init); -module_exit(gp2a_exit); +module_i2c_driver(gp2a_i2c_driver); MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>"); MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver"); diff --git a/drivers/input/misc/kxtj9.c b/drivers/input/misc/kxtj9.c index 783597a9a64a..f46139f19ff1 100644 --- a/drivers/input/misc/kxtj9.c +++ b/drivers/input/misc/kxtj9.c @@ -41,6 +41,14 @@ #define PC1_ON (1 << 7) /* Data ready funtion enable bit: set during probe if using irq mode */ #define DRDYE (1 << 5) +/* DATA CONTROL REGISTER BITS */ +#define ODR12_5F 0 +#define ODR25F 1 +#define ODR50F 2 +#define ODR100F 3 +#define ODR200F 4 +#define ODR400F 5 +#define ODR800F 6 /* INTERRUPT CONTROL REGISTER 1 BITS */ /* Set these during probe if using irq mode */ #define KXTJ9_IEL (1 << 3) @@ -116,9 +124,13 @@ static void kxtj9_report_acceleration_data(struct kxtj9_data *tj9) if (err < 0) dev_err(&tj9->client->dev, "accelerometer data read failed\n"); - x = le16_to_cpu(acc_data[tj9->pdata.axis_map_x]) >> tj9->shift; - y = le16_to_cpu(acc_data[tj9->pdata.axis_map_y]) >> tj9->shift; - z = le16_to_cpu(acc_data[tj9->pdata.axis_map_z]) >> tj9->shift; + x = le16_to_cpu(acc_data[tj9->pdata.axis_map_x]); + y = le16_to_cpu(acc_data[tj9->pdata.axis_map_y]); + z = le16_to_cpu(acc_data[tj9->pdata.axis_map_z]); + + x >>= tj9->shift; + y >>= tj9->shift; + z >>= tj9->shift; input_report_abs(tj9->input_dev, ABS_X, tj9->pdata.negate_x ? -x : x); input_report_abs(tj9->input_dev, ABS_Y, tj9->pdata.negate_y ? -y : y); @@ -487,7 +499,7 @@ static int __devinit kxtj9_verify(struct kxtj9_data *tj9) goto out; } - retval = retval != 0x06 ? -EIO : 0; + retval = (retval != 0x07 && retval != 0x08) ? -EIO : 0; out: kxtj9_device_power_off(tj9); @@ -537,7 +549,7 @@ static int __devinit kxtj9_probe(struct i2c_client *client, i2c_set_clientdata(client, tj9); tj9->ctrl_reg1 = tj9->pdata.res_12bit | tj9->pdata.g_range; - tj9->data_ctrl = tj9->pdata.data_odr_init; + tj9->last_poll_interval = tj9->pdata.init_interval; if (client->irq) { /* If in irq mode, populate INT_CTRL_REG1 and enable DRDY. */ @@ -655,17 +667,7 @@ static struct i2c_driver kxtj9_driver = { .id_table = kxtj9_id, }; -static int __init kxtj9_init(void) -{ - return i2c_add_driver(&kxtj9_driver); -} -module_init(kxtj9_init); - -static void __exit kxtj9_exit(void) -{ - i2c_del_driver(&kxtj9_driver); -} -module_exit(kxtj9_exit); +module_i2c_driver(kxtj9_driver); MODULE_DESCRIPTION("KXTJ9 accelerometer driver"); MODULE_AUTHOR("Chris Hudson <chudson@kionix.com>"); diff --git a/drivers/input/misc/max8925_onkey.c b/drivers/input/misc/max8925_onkey.c index 23cf08271049..0a12b74140d3 100644 --- a/drivers/input/misc/max8925_onkey.c +++ b/drivers/input/misc/max8925_onkey.c @@ -1,5 +1,5 @@ /** - * max8925_onkey.c - MAX8925 ONKEY driver + * MAX8925 ONKEY driver * * Copyright (C) 2009 Marvell International Ltd. * Haojian Zhuang <haojian.zhuang@marvell.com> @@ -35,7 +35,7 @@ struct max8925_onkey_info { struct input_dev *idev; struct i2c_client *i2c; struct device *dev; - int irq[2]; + unsigned int irq[2]; }; /* @@ -46,17 +46,14 @@ struct max8925_onkey_info { static irqreturn_t max8925_onkey_handler(int irq, void *data) { struct max8925_onkey_info *info = data; - int ret, event; - - ret = max8925_reg_read(info->i2c, MAX8925_ON_OFF_STATUS); - if (ret & SW_INPUT) - event = 1; - else - event = 0; - input_report_key(info->idev, KEY_POWER, event); + int state; + + state = max8925_reg_read(info->i2c, MAX8925_ON_OFF_STATUS); + + input_report_key(info->idev, KEY_POWER, state & SW_INPUT); input_sync(info->idev); - dev_dbg(info->dev, "onkey event:%d\n", event); + dev_dbg(info->dev, "onkey state:%d\n", state); /* Enable hardreset to halt if system isn't shutdown on time */ max8925_set_bits(info->i2c, MAX8925_SYSENSEL, @@ -69,6 +66,7 @@ static int __devinit max8925_onkey_probe(struct platform_device *pdev) { struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); struct max8925_onkey_info *info; + struct input_dev *input; int irq[2], error; irq[0] = platform_get_irq(pdev, 0); @@ -76,6 +74,7 @@ static int __devinit max8925_onkey_probe(struct platform_device *pdev) dev_err(&pdev->dev, "No IRQ resource!\n"); return -EINVAL; } + irq[1] = platform_get_irq(pdev, 1); if (irq[1] < 0) { dev_err(&pdev->dev, "No IRQ resource!\n"); @@ -83,11 +82,24 @@ static int __devinit max8925_onkey_probe(struct platform_device *pdev) } info = kzalloc(sizeof(struct max8925_onkey_info), GFP_KERNEL); - if (!info) - return -ENOMEM; + input = input_allocate_device(); + if (!info || !input) { + error = -ENOMEM; + goto err_free_mem; + } + info->idev = input; info->i2c = chip->i2c; info->dev = &pdev->dev; + info->irq[0] = irq[0]; + info->irq[1] = irq[1]; + + input->name = "max8925_on"; + input->phys = "max8925_on/input0"; + input->id.bustype = BUS_I2C; + input->dev.parent = &pdev->dev; + input_set_capability(input, EV_KEY, KEY_POWER); + irq[0] += chip->irq_base; irq[1] += chip->irq_base; @@ -96,60 +108,46 @@ static int __devinit max8925_onkey_probe(struct platform_device *pdev) if (error < 0) { dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", irq[0], error); - goto out; + goto err_free_mem; } + error = request_threaded_irq(irq[1], NULL, max8925_onkey_handler, IRQF_ONESHOT, "onkey-up", info); if (error < 0) { dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n", irq[1], error); - goto out_irq; + goto err_free_irq0; } - info->idev = input_allocate_device(); - if (!info->idev) { - dev_err(chip->dev, "Failed to allocate input dev\n"); - error = -ENOMEM; - goto out_input; - } - - info->idev->name = "max8925_on"; - info->idev->phys = "max8925_on/input0"; - info->idev->id.bustype = BUS_I2C; - info->idev->dev.parent = &pdev->dev; - info->irq[0] = irq[0]; - info->irq[1] = irq[1]; - info->idev->evbit[0] = BIT_MASK(EV_KEY); - info->idev->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER); - - error = input_register_device(info->idev); if (error) { dev_err(chip->dev, "Can't register input device: %d\n", error); - goto out_reg; + goto err_free_irq1; } platform_set_drvdata(pdev, info); + device_init_wakeup(&pdev->dev, 1); return 0; -out_reg: - input_free_device(info->idev); -out_input: - free_irq(info->irq[1], info); -out_irq: - free_irq(info->irq[0], info); -out: +err_free_irq1: + free_irq(irq[1], info); +err_free_irq0: + free_irq(irq[0], info); +err_free_mem: + input_free_device(input); kfree(info); + return error; } static int __devexit max8925_onkey_remove(struct platform_device *pdev) { struct max8925_onkey_info *info = platform_get_drvdata(pdev); + struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); - free_irq(info->irq[0], info); - free_irq(info->irq[1], info); + free_irq(info->irq[0] + chip->irq_base, info); + free_irq(info->irq[1] + chip->irq_base, info); input_unregister_device(info->idev); kfree(info); @@ -158,10 +156,43 @@ static int __devexit max8925_onkey_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int max8925_onkey_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct max8925_onkey_info *info = platform_get_drvdata(pdev); + struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) { + chip->wakeup_flag |= 1 << info->irq[0]; + chip->wakeup_flag |= 1 << info->irq[1]; + } + + return 0; +} + +static int max8925_onkey_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct max8925_onkey_info *info = platform_get_drvdata(pdev); + struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); + + if (device_may_wakeup(dev)) { + chip->wakeup_flag &= ~(1 << info->irq[0]); + chip->wakeup_flag &= ~(1 << info->irq[1]); + } + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(max8925_onkey_pm_ops, max8925_onkey_suspend, max8925_onkey_resume); + static struct platform_driver max8925_onkey_driver = { .driver = { .name = "max8925-onkey", .owner = THIS_MODULE, + .pm = &max8925_onkey_pm_ops, }, .probe = max8925_onkey_probe, .remove = __devexit_p(max8925_onkey_remove), diff --git a/drivers/input/misc/max8997_haptic.c b/drivers/input/misc/max8997_haptic.c new file mode 100644 index 000000000000..05b7b8bfaf0a --- /dev/null +++ b/drivers/input/misc/max8997_haptic.c @@ -0,0 +1,407 @@ +/* + * MAX8997-haptic controller driver + * + * Copyright (C) 2012 Samsung Electronics + * Donggeun Kim <dg77.kim@samsung.com> + * + * This program is not provided / owned by Maxim Integrated Products. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/pwm.h> +#include <linux/input.h> +#include <linux/mfd/max8997-private.h> +#include <linux/mfd/max8997.h> +#include <linux/regulator/consumer.h> + +/* Haptic configuration 2 register */ +#define MAX8997_MOTOR_TYPE_SHIFT 7 +#define MAX8997_ENABLE_SHIFT 6 +#define MAX8997_MODE_SHIFT 5 + +/* Haptic driver configuration register */ +#define MAX8997_CYCLE_SHIFT 6 +#define MAX8997_SIG_PERIOD_SHIFT 4 +#define MAX8997_SIG_DUTY_SHIFT 2 +#define MAX8997_PWM_DUTY_SHIFT 0 + +struct max8997_haptic { + struct device *dev; + struct i2c_client *client; + struct input_dev *input_dev; + struct regulator *regulator; + + struct work_struct work; + struct mutex mutex; + + bool enabled; + unsigned int level; + + struct pwm_device *pwm; + unsigned int pwm_period; + enum max8997_haptic_pwm_divisor pwm_divisor; + + enum max8997_haptic_motor_type type; + enum max8997_haptic_pulse_mode mode; + + unsigned int internal_mode_pattern; + unsigned int pattern_cycle; + unsigned int pattern_signal_period; +}; + +static int max8997_haptic_set_duty_cycle(struct max8997_haptic *chip) +{ + int ret = 0; + + if (chip->mode == MAX8997_EXTERNAL_MODE) { + unsigned int duty = chip->pwm_period * chip->level / 100; + ret = pwm_config(chip->pwm, duty, chip->pwm_period); + } else { + int i; + u8 duty_index = 0; + + for (i = 0; i <= 64; i++) { + if (chip->level <= i * 100 / 64) { + duty_index = i; + break; + } + } + switch (chip->internal_mode_pattern) { + case 0: + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_SIGPWMDC1, duty_index); + break; + case 1: + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_SIGPWMDC2, duty_index); + break; + case 2: + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_SIGPWMDC3, duty_index); + break; + case 3: + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_SIGPWMDC4, duty_index); + break; + default: + break; + } + } + return ret; +} + +static void max8997_haptic_configure(struct max8997_haptic *chip) +{ + u8 value; + + value = chip->type << MAX8997_MOTOR_TYPE_SHIFT | + chip->enabled << MAX8997_ENABLE_SHIFT | + chip->mode << MAX8997_MODE_SHIFT | chip->pwm_divisor; + max8997_write_reg(chip->client, MAX8997_HAPTIC_REG_CONF2, value); + + if (chip->mode == MAX8997_INTERNAL_MODE && chip->enabled) { + value = chip->internal_mode_pattern << MAX8997_CYCLE_SHIFT | + chip->internal_mode_pattern << MAX8997_SIG_PERIOD_SHIFT | + chip->internal_mode_pattern << MAX8997_SIG_DUTY_SHIFT | + chip->internal_mode_pattern << MAX8997_PWM_DUTY_SHIFT; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_DRVCONF, value); + + switch (chip->internal_mode_pattern) { + case 0: + value = chip->pattern_cycle << 4; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_CYCLECONF1, value); + value = chip->pattern_signal_period; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_SIGCONF1, value); + break; + + case 1: + value = chip->pattern_cycle; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_CYCLECONF1, value); + value = chip->pattern_signal_period; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_SIGCONF2, value); + break; + + case 2: + value = chip->pattern_cycle << 4; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_CYCLECONF2, value); + value = chip->pattern_signal_period; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_SIGCONF3, value); + break; + + case 3: + value = chip->pattern_cycle; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_CYCLECONF2, value); + value = chip->pattern_signal_period; + max8997_write_reg(chip->client, + MAX8997_HAPTIC_REG_SIGCONF4, value); + break; + + default: + break; + } + } +} + +static void max8997_haptic_enable(struct max8997_haptic *chip) +{ + int error; + + mutex_lock(&chip->mutex); + + error = max8997_haptic_set_duty_cycle(chip); + if (error) { + dev_err(chip->dev, "set_pwm_cycle failed, error: %d\n", error); + goto out; + } + + if (!chip->enabled) { + chip->enabled = true; + regulator_enable(chip->regulator); + max8997_haptic_configure(chip); + if (chip->mode == MAX8997_EXTERNAL_MODE) + pwm_enable(chip->pwm); + } + +out: + mutex_unlock(&chip->mutex); +} + +static void max8997_haptic_disable(struct max8997_haptic *chip) +{ + mutex_lock(&chip->mutex); + + if (chip->enabled) { + chip->enabled = false; + max8997_haptic_configure(chip); + if (chip->mode == MAX8997_EXTERNAL_MODE) + pwm_disable(chip->pwm); + regulator_disable(chip->regulator); + } + + mutex_unlock(&chip->mutex); +} + +static void max8997_haptic_play_effect_work(struct work_struct *work) +{ + struct max8997_haptic *chip = + container_of(work, struct max8997_haptic, work); + + if (chip->level) + max8997_haptic_enable(chip); + else + max8997_haptic_disable(chip); +} + +static int max8997_haptic_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct max8997_haptic *chip = input_get_drvdata(dev); + + chip->level = effect->u.rumble.strong_magnitude; + if (!chip->level) + chip->level = effect->u.rumble.weak_magnitude; + + schedule_work(&chip->work); + + return 0; +} + +static void max8997_haptic_close(struct input_dev *dev) +{ + struct max8997_haptic *chip = input_get_drvdata(dev); + + cancel_work_sync(&chip->work); + max8997_haptic_disable(chip); +} + +static int __devinit max8997_haptic_probe(struct platform_device *pdev) +{ + struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent); + const struct max8997_platform_data *pdata = + dev_get_platdata(iodev->dev); + const struct max8997_haptic_platform_data *haptic_pdata = + pdata->haptic_pdata; + struct max8997_haptic *chip; + struct input_dev *input_dev; + int error; + + if (!haptic_pdata) { + dev_err(&pdev->dev, "no haptic platform data\n"); + return -EINVAL; + } + + chip = kzalloc(sizeof(struct max8997_haptic), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!chip || !input_dev) { + dev_err(&pdev->dev, "unable to allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + INIT_WORK(&chip->work, max8997_haptic_play_effect_work); + mutex_init(&chip->mutex); + + chip->client = iodev->haptic; + chip->dev = &pdev->dev; + chip->input_dev = input_dev; + chip->pwm_period = haptic_pdata->pwm_period; + chip->type = haptic_pdata->type; + chip->mode = haptic_pdata->mode; + chip->pwm_divisor = haptic_pdata->pwm_divisor; + + switch (chip->mode) { + case MAX8997_INTERNAL_MODE: + chip->internal_mode_pattern = + haptic_pdata->internal_mode_pattern; + chip->pattern_cycle = haptic_pdata->pattern_cycle; + chip->pattern_signal_period = + haptic_pdata->pattern_signal_period; + break; + + case MAX8997_EXTERNAL_MODE: + chip->pwm = pwm_request(haptic_pdata->pwm_channel_id, + "max8997-haptic"); + if (IS_ERR(chip->pwm)) { + error = PTR_ERR(chip->pwm); + dev_err(&pdev->dev, + "unable to request PWM for haptic, error: %d\n", + error); + goto err_free_mem; + } + break; + + default: + dev_err(&pdev->dev, + "Invalid chip mode specified (%d)\n", chip->mode); + error = -EINVAL; + goto err_free_mem; + } + + chip->regulator = regulator_get(&pdev->dev, "inmotor"); + if (IS_ERR(chip->regulator)) { + error = PTR_ERR(chip->regulator); + dev_err(&pdev->dev, + "unable to get regulator, error: %d\n", + error); + goto err_free_pwm; + } + + input_dev->name = "max8997-haptic"; + input_dev->id.version = 1; + input_dev->dev.parent = &pdev->dev; + input_dev->close = max8997_haptic_close; + input_set_drvdata(input_dev, chip); + input_set_capability(input_dev, EV_FF, FF_RUMBLE); + + error = input_ff_create_memless(input_dev, NULL, + max8997_haptic_play_effect); + if (error) { + dev_err(&pdev->dev, + "unable to create FF device, error: %d\n", + error); + goto err_put_regulator; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, + "unable to register input device, error: %d\n", + error); + goto err_destroy_ff; + } + + platform_set_drvdata(pdev, chip); + return 0; + +err_destroy_ff: + input_ff_destroy(input_dev); +err_put_regulator: + regulator_put(chip->regulator); +err_free_pwm: + if (chip->mode == MAX8997_EXTERNAL_MODE) + pwm_free(chip->pwm); +err_free_mem: + input_free_device(input_dev); + kfree(chip); + + return error; +} + +static int __devexit max8997_haptic_remove(struct platform_device *pdev) +{ + struct max8997_haptic *chip = platform_get_drvdata(pdev); + + input_unregister_device(chip->input_dev); + regulator_put(chip->regulator); + + if (chip->mode == MAX8997_EXTERNAL_MODE) + pwm_free(chip->pwm); + + kfree(chip); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int max8997_haptic_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct max8997_haptic *chip = platform_get_drvdata(pdev); + + max8997_haptic_disable(chip); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(max8997_haptic_pm_ops, max8997_haptic_suspend, NULL); + +static const struct platform_device_id max8997_haptic_id[] = { + { "max8997-haptic", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, max8997_haptic_id); + +static struct platform_driver max8997_haptic_driver = { + .driver = { + .name = "max8997-haptic", + .owner = THIS_MODULE, + .pm = &max8997_haptic_pm_ops, + }, + .probe = max8997_haptic_probe, + .remove = __devexit_p(max8997_haptic_remove), + .id_table = max8997_haptic_id, +}; +module_platform_driver(max8997_haptic_driver); + +MODULE_ALIAS("platform:max8997-haptic"); +MODULE_AUTHOR("Donggeun Kim <dg77.kim@samsung.com>"); +MODULE_DESCRIPTION("max8997_haptic driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c index 4d60080bb5d5..873ebced544e 100644 --- a/drivers/input/misc/mma8450.c +++ b/drivers/input/misc/mma8450.c @@ -247,17 +247,7 @@ static struct i2c_driver mma8450_driver = { .id_table = mma8450_id, }; -static int __init mma8450_init(void) -{ - return i2c_add_driver(&mma8450_driver); -} -module_init(mma8450_init); - -static void __exit mma8450_exit(void) -{ - i2c_del_driver(&mma8450_driver); -} -module_exit(mma8450_exit); +module_i2c_driver(mma8450_driver); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("MMA8450 3-Axis Accelerometer Driver"); diff --git a/drivers/input/misc/mpu3050.c b/drivers/input/misc/mpu3050.c index 208d1a1cc7f3..5403c571b6a5 100644 --- a/drivers/input/misc/mpu3050.c +++ b/drivers/input/misc/mpu3050.c @@ -475,17 +475,7 @@ static struct i2c_driver mpu3050_i2c_driver = { .id_table = mpu3050_ids, }; -static int __init mpu3050_init(void) -{ - return i2c_add_driver(&mpu3050_i2c_driver); -} -module_init(mpu3050_init); - -static void __exit mpu3050_exit(void) -{ - i2c_del_driver(&mpu3050_i2c_driver); -} -module_exit(mpu3050_exit); +module_i2c_driver(mpu3050_i2c_driver); MODULE_AUTHOR("Wistron Corp."); MODULE_DESCRIPTION("MPU3050 Tri-axis gyroscope driver"); diff --git a/drivers/input/misc/pcf8574_keypad.c b/drivers/input/misc/pcf8574_keypad.c index 08be1a355956..544c6635abe9 100644 --- a/drivers/input/misc/pcf8574_keypad.c +++ b/drivers/input/misc/pcf8574_keypad.c @@ -216,17 +216,7 @@ static struct i2c_driver pcf8574_kp_driver = { .id_table = pcf8574_kp_id, }; -static int __init pcf8574_kp_init(void) -{ - return i2c_add_driver(&pcf8574_kp_driver); -} -module_init(pcf8574_kp_init); - -static void __exit pcf8574_kp_exit(void) -{ - i2c_del_driver(&pcf8574_kp_driver); -} -module_exit(pcf8574_kp_exit); +module_i2c_driver(pcf8574_kp_driver); MODULE_AUTHOR("Michael Hennerich"); MODULE_DESCRIPTION("Keypad input driver for 16 keys connected to PCF8574"); diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index f3bc4189a7ba..fc0ed9b43424 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -172,7 +172,7 @@ static void twl4030_vibra_close(struct input_dev *input) } /*** Module ***/ -#if CONFIG_PM_SLEEP +#ifdef CONFIG_PM_SLEEP static int twl4030_vibra_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 9c1e6ee83531..9b8db821d5f0 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -322,4 +322,21 @@ config MOUSE_SYNAPTICS_I2C To compile this driver as a module, choose M here: the module will be called synaptics_i2c. +config MOUSE_SYNAPTICS_USB + tristate "Synaptics USB device support" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you want to use a Synaptics USB touchpad or pointing + stick. + + While these devices emulate an USB mouse by default and can be used + with standard usbhid driver, this driver, together with its X.Org + counterpart, allows you to fully utilize capabilities of the device. + More information can be found at: + <http://jan-steinhoff.de/linux/synaptics-usb.html> + + To compile this driver as a module, choose M here: the + module will be called synaptics_usb. + endif diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 570c84a4a654..4718effeb8d9 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -18,6 +18,7 @@ obj-$(CONFIG_MOUSE_PXA930_TRKBALL) += pxa930_trkball.o obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o obj-$(CONFIG_MOUSE_SERIAL) += sermouse.o obj-$(CONFIG_MOUSE_SYNAPTICS_I2C) += synaptics_i2c.o +obj-$(CONFIG_MOUSE_SYNAPTICS_USB) += synaptics_usb.o obj-$(CONFIG_MOUSE_VSXXXAA) += vsxxxaa.o psmouse-objs := psmouse-base.o synaptics.o diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index 927e479c2649..f9e2758b9f46 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -433,6 +433,7 @@ static void setup_events_to_report(struct input_dev *input_dev, __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); if (cfg->caps & HAS_INTEGRATED_BUTTON) __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); diff --git a/drivers/input/mouse/hgpk.c b/drivers/input/mouse/hgpk.c index 1c5d521de600..575f880727fe 100644 --- a/drivers/input/mouse/hgpk.c +++ b/drivers/input/mouse/hgpk.c @@ -640,7 +640,6 @@ static int hgpk_reset_device(struct psmouse *psmouse, bool recalibrate) static int hgpk_force_recalibrate(struct psmouse *psmouse) { - struct ps2dev *ps2dev = &psmouse->ps2dev; struct hgpk_data *priv = psmouse->private; int err; @@ -669,12 +668,9 @@ static int hgpk_force_recalibrate(struct psmouse *psmouse) * we don't have a good way to deal with it. The 2s window stuff * (below) is our best option for now. */ - - if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) + if (psmouse_activate(psmouse)) return -1; - psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); - if (tpdebug) psmouse_dbg(psmouse, "touchpad reactivated\n"); @@ -733,8 +729,7 @@ static int hgpk_toggle_powersave(struct psmouse *psmouse, int enable) } /* should be all set, enable the touchpad */ - ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE); - psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + psmouse_activate(psmouse); psmouse_dbg(psmouse, "Touchpad powered up.\n"); } else { psmouse_dbg(psmouse, "Powering off touchpad.\n"); diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index e6c9931f02c7..22fe2547e169 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -1092,28 +1092,33 @@ static void psmouse_initialize(struct psmouse *psmouse) * psmouse_activate() enables the mouse so that we get motion reports from it. */ -static void psmouse_activate(struct psmouse *psmouse) +int psmouse_activate(struct psmouse *psmouse) { - if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) + if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE)) { psmouse_warn(psmouse, "Failed to enable mouse on %s\n", psmouse->ps2dev.serio->phys); + return -1; + } psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + return 0; } - /* * psmouse_deactivate() puts the mouse into poll mode so that we don't get motion * reports from it unless we explicitly request it. */ -static void psmouse_deactivate(struct psmouse *psmouse) +int psmouse_deactivate(struct psmouse *psmouse) { - if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) + if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE)) { psmouse_warn(psmouse, "Failed to deactivate mouse on %s\n", psmouse->ps2dev.serio->phys); + return -1; + } psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + return 0; } diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index 6a417092d010..fe1df231ba4c 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -105,6 +105,8 @@ int psmouse_reset(struct psmouse *psmouse); void psmouse_set_state(struct psmouse *psmouse, enum psmouse_state new_state); void psmouse_set_resolution(struct psmouse *psmouse, unsigned int resolution); psmouse_ret_t psmouse_process_byte(struct psmouse *psmouse); +int psmouse_activate(struct psmouse *psmouse); +int psmouse_deactivate(struct psmouse *psmouse); struct psmouse_attribute { struct device_attribute dattr; diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index e36847de7617..2a77a52d2e62 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -90,8 +90,7 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) * to do that for writes because sysfs set helper does this for * us. */ - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + psmouse_deactivate(psmouse); ps2_begin_command(ps2dev); @@ -128,8 +127,7 @@ static int fsp_reg_read(struct psmouse *psmouse, int reg_addr, int *reg_val) out: ps2_end_command(ps2dev); - ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); - psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + psmouse_activate(psmouse); dev_dbg(&ps2dev->serio->dev, "READ REG: 0x%02x is 0x%02x (rc = %d)\n", reg_addr, *reg_val, rc); return rc; @@ -213,8 +211,7 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) unsigned char param[3]; int rc = -1; - ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE); - psmouse_set_state(psmouse, PSMOUSE_CMD_MODE); + psmouse_deactivate(psmouse); ps2_begin_command(ps2dev); @@ -239,8 +236,7 @@ static int fsp_page_reg_read(struct psmouse *psmouse, int *reg_val) out: ps2_end_command(ps2dev); - ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); - psmouse_set_state(psmouse, PSMOUSE_ACTIVATED); + psmouse_activate(psmouse); dev_dbg(&ps2dev->serio->dev, "READ PAGE REG: 0x%02x (rc = %d)\n", *reg_val, rc); return rc; diff --git a/drivers/input/mouse/synaptics_i2c.c b/drivers/input/mouse/synaptics_i2c.c index 1c58aafa523f..f14675702c0f 100644 --- a/drivers/input/mouse/synaptics_i2c.c +++ b/drivers/input/mouse/synaptics_i2c.c @@ -672,18 +672,7 @@ static struct i2c_driver synaptics_i2c_driver = { .id_table = synaptics_i2c_id_table, }; -static int __init synaptics_i2c_init(void) -{ - return i2c_add_driver(&synaptics_i2c_driver); -} - -static void __exit synaptics_i2c_exit(void) -{ - i2c_del_driver(&synaptics_i2c_driver); -} - -module_init(synaptics_i2c_init); -module_exit(synaptics_i2c_exit); +module_i2c_driver(synaptics_i2c_driver); MODULE_DESCRIPTION("Synaptics I2C touchpad driver"); MODULE_AUTHOR("Mike Rapoport, Igor Grinberg, Compulab"); diff --git a/drivers/input/mouse/synaptics_usb.c b/drivers/input/mouse/synaptics_usb.c new file mode 100644 index 000000000000..3c5eaaa5d154 --- /dev/null +++ b/drivers/input/mouse/synaptics_usb.c @@ -0,0 +1,557 @@ +/* + * USB Synaptics device driver + * + * Copyright (c) 2002 Rob Miller (rob@inpharmatica . co . uk) + * Copyright (c) 2003 Ron Lee (ron@debian.org) + * cPad driver for kernel 2.4 + * + * Copyright (c) 2004 Jan Steinhoff (cpad@jan-steinhoff . de) + * Copyright (c) 2004 Ron Lee (ron@debian.org) + * rewritten for kernel 2.6 + * + * cPad display character device part is not included. It can be found at + * http://jan-steinhoff.de/linux/synaptics-usb.html + * + * Bases on: usb_skeleton.c v2.2 by Greg Kroah-Hartman + * drivers/hid/usbhid/usbmouse.c by Vojtech Pavlik + * drivers/input/mouse/synaptics.c by Peter Osterlund + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + * Trademarks are the property of their respective owners. + */ + +/* + * There are three different types of Synaptics USB devices: Touchpads, + * touchsticks (or trackpoints), and touchscreens. Touchpads are well supported + * by this driver, touchstick support has not been tested much yet, and + * touchscreens have not been tested at all. + * + * Up to three alternate settings are possible: + * setting 0: one int endpoint for relative movement (used by usbhid.ko) + * setting 1: one int endpoint for absolute finger position + * setting 2 (cPad only): one int endpoint for absolute finger position and + * two bulk endpoints for the display (in/out) + * This driver uses setting 1. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/usb.h> +#include <linux/input.h> +#include <linux/usb/input.h> + +#define USB_VENDOR_ID_SYNAPTICS 0x06cb +#define USB_DEVICE_ID_SYNAPTICS_TP 0x0001 /* Synaptics USB TouchPad */ +#define USB_DEVICE_ID_SYNAPTICS_INT_TP 0x0002 /* Integrated USB TouchPad */ +#define USB_DEVICE_ID_SYNAPTICS_CPAD 0x0003 /* Synaptics cPad */ +#define USB_DEVICE_ID_SYNAPTICS_TS 0x0006 /* Synaptics TouchScreen */ +#define USB_DEVICE_ID_SYNAPTICS_STICK 0x0007 /* Synaptics USB Styk */ +#define USB_DEVICE_ID_SYNAPTICS_WP 0x0008 /* Synaptics USB WheelPad */ +#define USB_DEVICE_ID_SYNAPTICS_COMP_TP 0x0009 /* Composite USB TouchPad */ +#define USB_DEVICE_ID_SYNAPTICS_WTP 0x0010 /* Wireless TouchPad */ +#define USB_DEVICE_ID_SYNAPTICS_DPAD 0x0013 /* DisplayPad */ + +#define SYNUSB_TOUCHPAD (1 << 0) +#define SYNUSB_STICK (1 << 1) +#define SYNUSB_TOUCHSCREEN (1 << 2) +#define SYNUSB_AUXDISPLAY (1 << 3) /* For cPad */ +#define SYNUSB_COMBO (1 << 4) /* Composite device (TP + stick) */ +#define SYNUSB_IO_ALWAYS (1 << 5) + +#define USB_DEVICE_SYNAPTICS(prod, kind) \ + USB_DEVICE(USB_VENDOR_ID_SYNAPTICS, \ + USB_DEVICE_ID_SYNAPTICS_##prod), \ + .driver_info = (kind), + +#define SYNUSB_RECV_SIZE 8 + +#define XMIN_NOMINAL 1472 +#define XMAX_NOMINAL 5472 +#define YMIN_NOMINAL 1408 +#define YMAX_NOMINAL 4448 + +struct synusb { + struct usb_device *udev; + struct usb_interface *intf; + struct urb *urb; + unsigned char *data; + + /* input device related data structures */ + struct input_dev *input; + char name[128]; + char phys[64]; + + /* characteristics of the device */ + unsigned long flags; +}; + +static void synusb_report_buttons(struct synusb *synusb) +{ + struct input_dev *input_dev = synusb->input; + + input_report_key(input_dev, BTN_LEFT, synusb->data[1] & 0x04); + input_report_key(input_dev, BTN_RIGHT, synusb->data[1] & 0x01); + input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x02); +} + +static void synusb_report_stick(struct synusb *synusb) +{ + struct input_dev *input_dev = synusb->input; + int x, y; + unsigned int pressure; + + pressure = synusb->data[6]; + x = (s16)(be16_to_cpup((__be16 *)&synusb->data[2]) << 3) >> 7; + y = (s16)(be16_to_cpup((__be16 *)&synusb->data[4]) << 3) >> 7; + + if (pressure > 0) { + input_report_rel(input_dev, REL_X, x); + input_report_rel(input_dev, REL_Y, -y); + } + + input_report_abs(input_dev, ABS_PRESSURE, pressure); + + synusb_report_buttons(synusb); + + input_sync(input_dev); +} + +static void synusb_report_touchpad(struct synusb *synusb) +{ + struct input_dev *input_dev = synusb->input; + unsigned int num_fingers, tool_width; + unsigned int x, y; + unsigned int pressure, w; + + pressure = synusb->data[6]; + x = be16_to_cpup((__be16 *)&synusb->data[2]); + y = be16_to_cpup((__be16 *)&synusb->data[4]); + w = synusb->data[0] & 0x0f; + + if (pressure > 0) { + num_fingers = 1; + tool_width = 5; + switch (w) { + case 0 ... 1: + num_fingers = 2 + w; + break; + + case 2: /* pen, pretend its a finger */ + break; + + case 4 ... 15: + tool_width = w; + break; + } + } else { + num_fingers = 0; + tool_width = 0; + } + + /* + * Post events + * BTN_TOUCH has to be first as mousedev relies on it when doing + * absolute -> relative conversion + */ + + if (pressure > 30) + input_report_key(input_dev, BTN_TOUCH, 1); + if (pressure < 25) + input_report_key(input_dev, BTN_TOUCH, 0); + + if (num_fingers > 0) { + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, + YMAX_NOMINAL + YMIN_NOMINAL - y); + } + + input_report_abs(input_dev, ABS_PRESSURE, pressure); + input_report_abs(input_dev, ABS_TOOL_WIDTH, tool_width); + + input_report_key(input_dev, BTN_TOOL_FINGER, num_fingers == 1); + input_report_key(input_dev, BTN_TOOL_DOUBLETAP, num_fingers == 2); + input_report_key(input_dev, BTN_TOOL_TRIPLETAP, num_fingers == 3); + + synusb_report_buttons(synusb); + if (synusb->flags & SYNUSB_AUXDISPLAY) + input_report_key(input_dev, BTN_MIDDLE, synusb->data[1] & 0x08); + + input_sync(input_dev); +} + +static void synusb_irq(struct urb *urb) +{ + struct synusb *synusb = urb->context; + int error; + + /* Check our status in case we need to bail out early. */ + switch (urb->status) { + case 0: + usb_mark_last_busy(synusb->udev); + break; + + /* Device went away so don't keep trying to read from it. */ + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + return; + + default: + goto resubmit; + break; + } + + if (synusb->flags & SYNUSB_STICK) + synusb_report_stick(synusb); + else + synusb_report_touchpad(synusb); + +resubmit: + error = usb_submit_urb(urb, GFP_ATOMIC); + if (error && error != -EPERM) + dev_err(&synusb->intf->dev, + "%s - usb_submit_urb failed with result: %d", + __func__, error); +} + +static struct usb_endpoint_descriptor * +synusb_get_in_endpoint(struct usb_host_interface *iface) +{ + + struct usb_endpoint_descriptor *endpoint; + int i; + + for (i = 0; i < iface->desc.bNumEndpoints; ++i) { + endpoint = &iface->endpoint[i].desc; + + if (usb_endpoint_is_int_in(endpoint)) { + /* we found our interrupt in endpoint */ + return endpoint; + } + } + + return NULL; +} + +static int synusb_open(struct input_dev *dev) +{ + struct synusb *synusb = input_get_drvdata(dev); + int retval; + + retval = usb_autopm_get_interface(synusb->intf); + if (retval) { + dev_err(&synusb->intf->dev, + "%s - usb_autopm_get_interface failed, error: %d\n", + __func__, retval); + return retval; + } + + retval = usb_submit_urb(synusb->urb, GFP_KERNEL); + if (retval) { + dev_err(&synusb->intf->dev, + "%s - usb_submit_urb failed, error: %d\n", + __func__, retval); + retval = -EIO; + goto out; + } + + synusb->intf->needs_remote_wakeup = 1; + +out: + usb_autopm_put_interface(synusb->intf); + return retval; +} + +static void synusb_close(struct input_dev *dev) +{ + struct synusb *synusb = input_get_drvdata(dev); + int autopm_error; + + autopm_error = usb_autopm_get_interface(synusb->intf); + + usb_kill_urb(synusb->urb); + synusb->intf->needs_remote_wakeup = 0; + + if (!autopm_error) + usb_autopm_put_interface(synusb->intf); +} + +static int synusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_endpoint_descriptor *ep; + struct synusb *synusb; + struct input_dev *input_dev; + unsigned int intf_num = intf->cur_altsetting->desc.bInterfaceNumber; + unsigned int altsetting = min(intf->num_altsetting, 1U); + int error; + + error = usb_set_interface(udev, intf_num, altsetting); + if (error) { + dev_err(&udev->dev, + "Can not set alternate setting to %i, error: %i", + altsetting, error); + return error; + } + + ep = synusb_get_in_endpoint(intf->cur_altsetting); + if (!ep) + return -ENODEV; + + synusb = kzalloc(sizeof(*synusb), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!synusb || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + synusb->udev = udev; + synusb->intf = intf; + synusb->input = input_dev; + + synusb->flags = id->driver_info; + if (synusb->flags & SYNUSB_COMBO) { + /* + * This is a combo device, we need to set proper + * capability, depending on the interface. + */ + synusb->flags |= intf_num == 1 ? + SYNUSB_STICK : SYNUSB_TOUCHPAD; + } + + synusb->urb = usb_alloc_urb(0, GFP_KERNEL); + if (!synusb->urb) { + error = -ENOMEM; + goto err_free_mem; + } + + synusb->data = usb_alloc_coherent(udev, SYNUSB_RECV_SIZE, GFP_KERNEL, + &synusb->urb->transfer_dma); + if (!synusb->data) { + error = -ENOMEM; + goto err_free_urb; + } + + usb_fill_int_urb(synusb->urb, udev, + usb_rcvintpipe(udev, ep->bEndpointAddress), + synusb->data, SYNUSB_RECV_SIZE, + synusb_irq, synusb, + ep->bInterval); + synusb->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + + if (udev->manufacturer) + strlcpy(synusb->name, udev->manufacturer, + sizeof(synusb->name)); + + if (udev->product) { + if (udev->manufacturer) + strlcat(synusb->name, " ", sizeof(synusb->name)); + strlcat(synusb->name, udev->product, sizeof(synusb->name)); + } + + if (!strlen(synusb->name)) + snprintf(synusb->name, sizeof(synusb->name), + "USB Synaptics Device %04x:%04x", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + if (synusb->flags & SYNUSB_STICK) + strlcat(synusb->name, " (Stick) ", sizeof(synusb->name)); + + usb_make_path(udev, synusb->phys, sizeof(synusb->phys)); + strlcat(synusb->phys, "/input0", sizeof(synusb->phys)); + + input_dev->name = synusb->name; + input_dev->phys = synusb->phys; + usb_to_input_id(udev, &input_dev->id); + input_dev->dev.parent = &synusb->intf->dev; + + if (!(synusb->flags & SYNUSB_IO_ALWAYS)) { + input_dev->open = synusb_open; + input_dev->close = synusb_close; + } + + input_set_drvdata(input_dev, synusb); + + __set_bit(EV_ABS, input_dev->evbit); + __set_bit(EV_KEY, input_dev->evbit); + + if (synusb->flags & SYNUSB_STICK) { + __set_bit(EV_REL, input_dev->evbit); + __set_bit(REL_X, input_dev->relbit); + __set_bit(REL_Y, input_dev->relbit); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 127, 0, 0); + } else { + input_set_abs_params(input_dev, ABS_X, + XMIN_NOMINAL, XMAX_NOMINAL, 0, 0); + input_set_abs_params(input_dev, ABS_Y, + YMIN_NOMINAL, YMAX_NOMINAL, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0); + input_set_abs_params(input_dev, ABS_TOOL_WIDTH, 0, 15, 0, 0); + __set_bit(BTN_TOUCH, input_dev->keybit); + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + } + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_MIDDLE, input_dev->keybit); + + usb_set_intfdata(intf, synusb); + + if (synusb->flags & SYNUSB_IO_ALWAYS) { + error = synusb_open(input_dev); + if (error) + goto err_free_dma; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&udev->dev, + "Failed to register input device, error %d\n", + error); + goto err_stop_io; + } + + return 0; + +err_stop_io: + if (synusb->flags & SYNUSB_IO_ALWAYS) + synusb_close(synusb->input); +err_free_dma: + usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data, + synusb->urb->transfer_dma); +err_free_urb: + usb_free_urb(synusb->urb); +err_free_mem: + input_free_device(input_dev); + kfree(synusb); + usb_set_intfdata(intf, NULL); + + return error; +} + +static void synusb_disconnect(struct usb_interface *intf) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct usb_device *udev = interface_to_usbdev(intf); + + if (synusb->flags & SYNUSB_IO_ALWAYS) + synusb_close(synusb->input); + + input_unregister_device(synusb->input); + + usb_free_coherent(udev, SYNUSB_RECV_SIZE, synusb->data, + synusb->urb->transfer_dma); + usb_free_urb(synusb->urb); + kfree(synusb); + + usb_set_intfdata(intf, NULL); +} + +static int synusb_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct input_dev *input_dev = synusb->input; + + mutex_lock(&input_dev->mutex); + usb_kill_urb(synusb->urb); + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int synusb_resume(struct usb_interface *intf) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct input_dev *input_dev = synusb->input; + int retval = 0; + + mutex_lock(&input_dev->mutex); + + if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) && + usb_submit_urb(synusb->urb, GFP_NOIO) < 0) { + retval = -EIO; + } + + mutex_unlock(&input_dev->mutex); + + return retval; +} + +static int synusb_pre_reset(struct usb_interface *intf) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct input_dev *input_dev = synusb->input; + + mutex_lock(&input_dev->mutex); + usb_kill_urb(synusb->urb); + + return 0; +} + +static int synusb_post_reset(struct usb_interface *intf) +{ + struct synusb *synusb = usb_get_intfdata(intf); + struct input_dev *input_dev = synusb->input; + int retval = 0; + + if ((input_dev->users || (synusb->flags & SYNUSB_IO_ALWAYS)) && + usb_submit_urb(synusb->urb, GFP_NOIO) < 0) { + retval = -EIO; + } + + mutex_unlock(&input_dev->mutex); + + return retval; +} + +static int synusb_reset_resume(struct usb_interface *intf) +{ + return synusb_resume(intf); +} + +static struct usb_device_id synusb_idtable[] = { + { USB_DEVICE_SYNAPTICS(TP, SYNUSB_TOUCHPAD) }, + { USB_DEVICE_SYNAPTICS(INT_TP, SYNUSB_TOUCHPAD) }, + { USB_DEVICE_SYNAPTICS(CPAD, + SYNUSB_TOUCHPAD | SYNUSB_AUXDISPLAY | SYNUSB_IO_ALWAYS) }, + { USB_DEVICE_SYNAPTICS(TS, SYNUSB_TOUCHSCREEN) }, + { USB_DEVICE_SYNAPTICS(STICK, SYNUSB_STICK) }, + { USB_DEVICE_SYNAPTICS(WP, SYNUSB_TOUCHPAD) }, + { USB_DEVICE_SYNAPTICS(COMP_TP, SYNUSB_COMBO) }, + { USB_DEVICE_SYNAPTICS(WTP, SYNUSB_TOUCHPAD) }, + { USB_DEVICE_SYNAPTICS(DPAD, SYNUSB_TOUCHPAD) }, + { } +}; +MODULE_DEVICE_TABLE(usb, synusb_idtable); + +static struct usb_driver synusb_driver = { + .name = "synaptics_usb", + .probe = synusb_probe, + .disconnect = synusb_disconnect, + .id_table = synusb_idtable, + .suspend = synusb_suspend, + .resume = synusb_resume, + .pre_reset = synusb_pre_reset, + .post_reset = synusb_post_reset, + .reset_resume = synusb_reset_resume, + .supports_autosuspend = 1, +}; + +module_usb_driver(synusb_driver); + +MODULE_AUTHOR("Rob Miller <rob@inpharmatica.co.uk>, " + "Ron Lee <ron@debian.org>, " + "Jan Steinhoff <cpad@jan-steinhoff.de>"); +MODULE_DESCRIPTION("Synaptics USB device driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/of_keymap.c b/drivers/input/of_keymap.c new file mode 100644 index 000000000000..061493d57682 --- /dev/null +++ b/drivers/input/of_keymap.c @@ -0,0 +1,87 @@ +/* + * Helpers for open firmware matrix keyboard bindings + * + * Copyright (C) 2012 Google, Inc + * + * Author: + * Olof Johansson <olof@lixom.net> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/input.h> +#include <linux/of.h> +#include <linux/input/matrix_keypad.h> +#include <linux/export.h> +#include <linux/gfp.h> +#include <linux/slab.h> + +struct matrix_keymap_data * +matrix_keyboard_of_fill_keymap(struct device_node *np, + const char *propname) +{ + struct matrix_keymap_data *kd; + u32 *keymap; + int proplen, i; + const __be32 *prop; + + if (!np) + return NULL; + + if (!propname) + propname = "linux,keymap"; + + prop = of_get_property(np, propname, &proplen); + if (!prop) + return NULL; + + if (proplen % sizeof(u32)) { + pr_warn("Malformed keymap property %s in %s\n", + propname, np->full_name); + return NULL; + } + + kd = kzalloc(sizeof(*kd), GFP_KERNEL); + if (!kd) + return NULL; + + kd->keymap = keymap = kzalloc(proplen, GFP_KERNEL); + if (!kd->keymap) { + kfree(kd); + return NULL; + } + + kd->keymap_size = proplen / sizeof(u32); + + for (i = 0; i < kd->keymap_size; i++) { + u32 tmp = be32_to_cpup(prop + i); + int key_code, row, col; + + row = (tmp >> 24) & 0xff; + col = (tmp >> 16) & 0xff; + key_code = tmp & 0xffff; + keymap[i] = KEY(row, col, key_code); + } + + return kd; +} +EXPORT_SYMBOL_GPL(matrix_keyboard_of_fill_keymap); + +void matrix_keyboard_of_free_keymap(const struct matrix_keymap_data *kd) +{ + if (kd) { + kfree(kd->keymap); + kfree(kd); + } +} +EXPORT_SYMBOL_GPL(matrix_keyboard_of_free_keymap); diff --git a/drivers/input/serio/altera_ps2.c b/drivers/input/serio/altera_ps2.c index 35864c6130bb..cc11f4efe119 100644 --- a/drivers/input/serio/altera_ps2.c +++ b/drivers/input/serio/altera_ps2.c @@ -180,8 +180,6 @@ static const struct of_device_id altera_ps2_match[] = { {}, }; MODULE_DEVICE_TABLE(of, altera_ps2_match); -#else /* CONFIG_OF */ -#define altera_ps2_match NULL #endif /* CONFIG_OF */ /* @@ -193,7 +191,7 @@ static struct platform_driver altera_ps2_driver = { .driver = { .name = DRV_NAME, .owner = THIS_MODULE, - .of_match_table = altera_ps2_match, + .of_match_table = of_match_ptr(altera_ps2_match), }, }; module_platform_driver(altera_ps2_driver); diff --git a/drivers/input/serio/at32psif.c b/drivers/input/serio/at32psif.c index 95280f9207e1..36e799c31f5e 100644 --- a/drivers/input/serio/at32psif.c +++ b/drivers/input/serio/at32psif.c @@ -98,9 +98,9 @@ struct psif { struct serio *io; void __iomem *regs; unsigned int irq; - unsigned int open; /* Prevent concurrent writes to PSIF THR. */ spinlock_t lock; + bool open; }; static irqreturn_t psif_interrupt(int irq, void *_ptr) @@ -164,7 +164,7 @@ static int psif_open(struct serio *io) psif_writel(psif, CR, PSIF_BIT(CR_TXEN) | PSIF_BIT(CR_RXEN)); psif_writel(psif, IER, PSIF_BIT(RXRDY)); - psif->open = 1; + psif->open = true; out: return retval; } @@ -173,7 +173,7 @@ static void psif_close(struct serio *io) { struct psif *psif = io->port_data; - psif->open = 0; + psif->open = false; psif_writel(psif, IDR, ~0UL); psif_writel(psif, CR, PSIF_BIT(CR_TXDIS) | PSIF_BIT(CR_RXDIS)); @@ -319,9 +319,10 @@ static int __exit psif_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int psif_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_PM_SLEEP +static int psif_suspend(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct psif *psif = platform_get_drvdata(pdev); if (psif->open) { @@ -332,8 +333,9 @@ static int psif_suspend(struct platform_device *pdev, pm_message_t state) return 0; } -static int psif_resume(struct platform_device *pdev) +static int psif_resume(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct psif *psif = platform_get_drvdata(pdev); if (psif->open) { @@ -344,19 +346,17 @@ static int psif_resume(struct platform_device *pdev) return 0; } -#else -#define psif_suspend NULL -#define psif_resume NULL #endif +static SIMPLE_DEV_PM_OPS(psif_pm_ops, psif_suspend, psif_resume); + static struct platform_driver psif_driver = { .remove = __exit_p(psif_remove), .driver = { .name = "atmel_psif", .owner = THIS_MODULE, + .pm = &psif_pm_ops, }, - .suspend = psif_suspend, - .resume = psif_resume, }; static int __init psif_init(void) diff --git a/drivers/input/serio/q40kbd.c b/drivers/input/serio/q40kbd.c index 5eb84b3b67fb..0c0df7f73802 100644 --- a/drivers/input/serio/q40kbd.c +++ b/drivers/input/serio/q40kbd.c @@ -44,26 +44,31 @@ #include <asm/irq.h> #include <asm/q40ints.h> +#define DRV_NAME "q40kbd" + MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>"); MODULE_DESCRIPTION("Q40 PS/2 keyboard controller driver"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); -static DEFINE_SPINLOCK(q40kbd_lock); -static struct serio *q40kbd_port; -static struct platform_device *q40kbd_device; +struct q40kbd { + struct serio *port; + spinlock_t lock; +}; static irqreturn_t q40kbd_interrupt(int irq, void *dev_id) { + struct q40kbd *q40kbd = dev_id; unsigned long flags; - spin_lock_irqsave(&q40kbd_lock, flags); + spin_lock_irqsave(&q40kbd->lock, flags); if (Q40_IRQ_KEYB_MASK & master_inb(INTERRUPT_REG)) - serio_interrupt(q40kbd_port, master_inb(KEYCODE_REG), 0); + serio_interrupt(q40kbd->port, master_inb(KEYCODE_REG), 0); master_outb(-1, KEYBOARD_UNLOCK_REG); - spin_unlock_irqrestore(&q40kbd_lock, flags); + spin_unlock_irqrestore(&q40kbd->lock, flags); return IRQ_HANDLED; } @@ -72,17 +77,23 @@ static irqreturn_t q40kbd_interrupt(int irq, void *dev_id) * q40kbd_flush() flushes all data that may be in the keyboard buffers */ -static void q40kbd_flush(void) +static void q40kbd_flush(struct q40kbd *q40kbd) { int maxread = 100; unsigned long flags; - spin_lock_irqsave(&q40kbd_lock, flags); + spin_lock_irqsave(&q40kbd->lock, flags); while (maxread-- && (Q40_IRQ_KEYB_MASK & master_inb(INTERRUPT_REG))) master_inb(KEYCODE_REG); - spin_unlock_irqrestore(&q40kbd_lock, flags); + spin_unlock_irqrestore(&q40kbd->lock, flags); +} + +static void q40kbd_stop(void) +{ + master_outb(0, KEY_IRQ_ENABLE_REG); + master_outb(-1, KEYBOARD_UNLOCK_REG); } /* @@ -92,12 +103,9 @@ static void q40kbd_flush(void) static int q40kbd_open(struct serio *port) { - q40kbd_flush(); + struct q40kbd *q40kbd = port->port_data; - if (request_irq(Q40_IRQ_KEYBOARD, q40kbd_interrupt, 0, "q40kbd", NULL)) { - printk(KERN_ERR "q40kbd.c: Can't get irq %d.\n", Q40_IRQ_KEYBOARD); - return -EBUSY; - } + q40kbd_flush(q40kbd); /* off we go */ master_outb(-1, KEYBOARD_UNLOCK_REG); @@ -108,36 +116,72 @@ static int q40kbd_open(struct serio *port) static void q40kbd_close(struct serio *port) { - master_outb(0, KEY_IRQ_ENABLE_REG); - master_outb(-1, KEYBOARD_UNLOCK_REG); - free_irq(Q40_IRQ_KEYBOARD, NULL); + struct q40kbd *q40kbd = port->port_data; - q40kbd_flush(); + q40kbd_stop(); + q40kbd_flush(q40kbd); } -static int __devinit q40kbd_probe(struct platform_device *dev) +static int __devinit q40kbd_probe(struct platform_device *pdev) { - q40kbd_port = kzalloc(sizeof(struct serio), GFP_KERNEL); - if (!q40kbd_port) - return -ENOMEM; - - q40kbd_port->id.type = SERIO_8042; - q40kbd_port->open = q40kbd_open; - q40kbd_port->close = q40kbd_close; - q40kbd_port->dev.parent = &dev->dev; - strlcpy(q40kbd_port->name, "Q40 Kbd Port", sizeof(q40kbd_port->name)); - strlcpy(q40kbd_port->phys, "Q40", sizeof(q40kbd_port->phys)); - - serio_register_port(q40kbd_port); + struct q40kbd *q40kbd; + struct serio *port; + int error; + + q40kbd = kzalloc(sizeof(struct q40kbd), GFP_KERNEL); + port = kzalloc(sizeof(struct serio), GFP_KERNEL); + if (!q40kbd || !port) { + error = -ENOMEM; + goto err_free_mem; + } + + q40kbd->port = port; + spin_lock_init(&q40kbd->lock); + + port->id.type = SERIO_8042; + port->open = q40kbd_open; + port->close = q40kbd_close; + port->port_data = q40kbd; + port->dev.parent = &pdev->dev; + strlcpy(port->name, "Q40 Kbd Port", sizeof(port->name)); + strlcpy(port->phys, "Q40", sizeof(port->phys)); + + q40kbd_stop(); + + error = request_irq(Q40_IRQ_KEYBOARD, q40kbd_interrupt, 0, + DRV_NAME, q40kbd); + if (error) { + dev_err(&pdev->dev, "Can't get irq %d.\n", Q40_IRQ_KEYBOARD); + goto err_free_mem; + } + + serio_register_port(q40kbd->port); + + platform_set_drvdata(pdev, q40kbd); printk(KERN_INFO "serio: Q40 kbd registered\n"); return 0; + +err_free_mem: + kfree(port); + kfree(q40kbd); + return error; } -static int __devexit q40kbd_remove(struct platform_device *dev) +static int __devexit q40kbd_remove(struct platform_device *pdev) { - serio_unregister_port(q40kbd_port); - + struct q40kbd *q40kbd = platform_get_drvdata(pdev); + + /* + * q40kbd_close() will be called as part of unregistering + * and will ensure that IRQ is turned off, so it is safe + * to unregister port first and free IRQ later. + */ + serio_unregister_port(q40kbd->port); + free_irq(Q40_IRQ_KEYBOARD, q40kbd); + kfree(q40kbd); + + platform_set_drvdata(pdev, NULL); return 0; } @@ -146,41 +190,16 @@ static struct platform_driver q40kbd_driver = { .name = "q40kbd", .owner = THIS_MODULE, }, - .probe = q40kbd_probe, .remove = __devexit_p(q40kbd_remove), }; static int __init q40kbd_init(void) { - int error; - - if (!MACH_IS_Q40) - return -ENODEV; - - error = platform_driver_register(&q40kbd_driver); - if (error) - return error; - - q40kbd_device = platform_device_alloc("q40kbd", -1); - if (!q40kbd_device) - goto err_unregister_driver; - - error = platform_device_add(q40kbd_device); - if (error) - goto err_free_device; - - return 0; - - err_free_device: - platform_device_put(q40kbd_device); - err_unregister_driver: - platform_driver_unregister(&q40kbd_driver); - return error; + return platform_driver_probe(&q40kbd_driver, q40kbd_probe); } static void __exit q40kbd_exit(void) { - platform_device_unregister(q40kbd_device); platform_driver_unregister(&q40kbd_driver); } diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index 2a97b7e76db1..ca28066dc81e 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -176,7 +176,7 @@ static int wacom_parse_logical_collection(unsigned char *report, /* Logical collection is only used by 3rd gen Bamboo Touch */ features->pktlen = WACOM_PKGLEN_BBTOUCH3; - features->device_type = BTN_TOOL_DOUBLETAP; + features->device_type = BTN_TOOL_FINGER; /* * Stylus and Touch have same active area @@ -184,9 +184,9 @@ static int wacom_parse_logical_collection(unsigned char *report, * data before its overwritten. */ features->x_phy = - (features->x_max * features->x_resolution) / 100; + (features->x_max * 100) / features->x_resolution; features->y_phy = - (features->y_max * features->y_resolution) / 100; + (features->y_max * 100) / features->y_resolution; features->x_max = features->y_max = get_unaligned_le16(&report[10]); @@ -286,12 +286,10 @@ static int wacom_parse_hid(struct usb_interface *intf, if (features->type == TABLETPC2FG) { /* need to reset back */ features->pktlen = WACOM_PKGLEN_TPC2FG; - features->device_type = BTN_TOOL_DOUBLETAP; } if (features->type == BAMBOO_PT) { /* need to reset back */ features->pktlen = WACOM_PKGLEN_BBTOUCH; - features->device_type = BTN_TOOL_DOUBLETAP; features->x_phy = get_unaligned_le16(&report[i + 5]); features->x_max = @@ -325,7 +323,6 @@ static int wacom_parse_hid(struct usb_interface *intf, if (features->type == TABLETPC2FG) { /* need to reset back */ features->pktlen = WACOM_PKGLEN_TPC2FG; - features->device_type = BTN_TOOL_DOUBLETAP; features->y_max = get_unaligned_le16(&report[i + 3]); features->y_phy = @@ -334,7 +331,6 @@ static int wacom_parse_hid(struct usb_interface *intf, } else if (features->type == BAMBOO_PT) { /* need to reset back */ features->pktlen = WACOM_PKGLEN_BBTOUCH; - features->device_type = BTN_TOOL_DOUBLETAP; features->y_phy = get_unaligned_le16(&report[i + 3]); features->y_max = diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index cd3ed29e0801..89a96427faa0 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -832,12 +832,24 @@ static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) dbg("wacom_tpc_irq: received report #%d", data[0]); - if (len == WACOM_PKGLEN_TPC1FG || data[0] == WACOM_REPORT_TPC1FG) - return wacom_tpc_single_touch(wacom, len); - else if (data[0] == WACOM_REPORT_TPC2FG) - return wacom_tpc_mt_touch(wacom); - else if (data[0] == WACOM_REPORT_PENABLED) - return wacom_tpc_pen(wacom); + switch (len) { + case WACOM_PKGLEN_TPC1FG: + return wacom_tpc_single_touch(wacom, len); + + case WACOM_PKGLEN_TPC2FG: + return wacom_tpc_mt_touch(wacom); + + default: + switch (data[0]) { + case WACOM_REPORT_TPC1FG: + case WACOM_REPORT_TPCHID: + case WACOM_REPORT_TPCST: + return wacom_tpc_single_touch(wacom, len); + + case WACOM_REPORT_PENABLED: + return wacom_tpc_pen(wacom); + } + } return 0; } @@ -1317,7 +1329,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, break; case TABLETPC2FG: - if (features->device_type == BTN_TOOL_DOUBLETAP) { + if (features->device_type == BTN_TOOL_FINGER) { input_mt_init_slots(input_dev, 2); input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, @@ -1366,7 +1378,7 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(INPUT_PROP_POINTER, input_dev->propbit); - if (features->device_type == BTN_TOOL_DOUBLETAP) { + if (features->device_type == BTN_TOOL_FINGER) { __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_FORWARD, input_dev->keybit); __set_bit(BTN_BACK, input_dev->keybit); diff --git a/drivers/input/tablet/wacom_wac.h b/drivers/input/tablet/wacom_wac.h index 050acaefee7d..4f0ba21b0196 100644 --- a/drivers/input/tablet/wacom_wac.h +++ b/drivers/input/tablet/wacom_wac.h @@ -39,6 +39,8 @@ #define WACOM_REPORT_INTUOSPAD 12 #define WACOM_REPORT_TPC1FG 6 #define WACOM_REPORT_TPC2FG 13 +#define WACOM_REPORT_TPCHID 15 +#define WACOM_REPORT_TPCST 16 /* device quirks */ #define WACOM_QUIRK_MULTI_INPUT 0x0001 diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 4af2a18eb3ba..97b31a0e0525 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -139,7 +139,6 @@ config TOUCHSCREEN_CY8CTMG110 tristate "cy8ctmg110 touchscreen" depends on I2C depends on GPIOLIB - help Say Y here if you have a cy8ctmg110 capacitive touchscreen on an AAVA device. @@ -149,6 +148,37 @@ config TOUCHSCREEN_CY8CTMG110 To compile this driver as a module, choose M here: the module will be called cy8ctmg110_ts. +config TOUCHSCREEN_CYTTSP_CORE + tristate "Cypress TTSP touchscreen" + help + Say Y here if you have a touchscreen using controller from + the Cypress TrueTouch(tm) Standard Product family connected + to your system. You will also need to select appropriate + bus connection below. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_core. + +config TOUCHSCREEN_CYTTSP_I2C + tristate "support I2C bus connection" + depends on TOUCHSCREEN_CYTTSP_CORE && I2C + help + Say Y here if the touchscreen is connected via I2C bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_i2c. + +config TOUCHSCREEN_CYTTSP_SPI + tristate "support SPI bus connection" + depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER + help + Say Y here if the touchscreen is connected via SPI bus. + + To compile this driver as a module, choose M here: the + module will be called cyttsp_spi. + config TOUCHSCREEN_DA9034 tristate "Touchscreen support for Dialog Semiconductor DA9034" depends on PMIC_DA903X @@ -213,6 +243,21 @@ config TOUCHSCREEN_FUJITSU To compile this driver as a module, choose M here: the module will be called fujitsu-ts. +config TOUCHSCREEN_ILI210X + tristate "Ilitek ILI210X based touchscreen" + depends on I2C + help + Say Y here if you have a ILI210X based touchscreen + controller. This driver supports models ILI2102, + ILI2102s, ILI2103, ILI2103s and ILI2105. + Such kind of chipsets can be found in Amazon Kindle Fire + touchscreens. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ili210x. + config TOUCHSCREEN_S3C2410 tristate "Samsung S3C2410/generic touchscreen input driver" depends on ARCH_S3C2410 || SAMSUNG_DEV_TS @@ -430,6 +475,18 @@ config TOUCHSCREEN_TOUCHWIN To compile this driver as a module, choose M here: the module will be called touchwin. +config TOUCHSCREEN_TI_TSCADC + tristate "TI Touchscreen Interface" + depends on ARCH_OMAP2PLUS + help + Say Y here if you have 4/5/8 wire touchscreen controller + to be connected to the ADC controller on your TI AM335x SoC. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called ti_tscadc. + config TOUCHSCREEN_ATMEL_TSADCC tristate "Atmel Touchscreen Interface" depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45 @@ -577,6 +634,7 @@ config TOUCHSCREEN_USB_COMPOSITE - JASTEC USB Touch Controller/DigiTech DTR-02U - Zytronic controllers - Elo TouchSystems 2700 IntelliTouch + - EasyTouch USB Touch Controller from Data Modul Have a look at <http://linux.chapter7.ch/touchkit/> for a usage description and the required user-space stuff. @@ -681,6 +739,14 @@ config TOUCHSCREEN_USB_NEXIO bool "NEXIO/iNexio device support" if EXPERT depends on TOUCHSCREEN_USB_COMPOSITE +config TOUCHSCREEN_USB_EASYTOUCH + default y + bool "EasyTouch USB Touch controller device support" if EMBEDDED + depends on TOUCHSCREEN_USB_COMPOSITE + help + Say Y here if you have a EasyTouch USB Touch controller device support. + If unsure, say N. + config TOUCHSCREEN_TOUCHIT213 tristate "Sahara TouchIT-213 touchscreen" select SERIO diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 496091e88460..3d5cf8cbf89c 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -16,8 +16,11 @@ obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) += atmel_tsadcc.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BITSY) += h3600_ts_input.o -obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o +obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o +obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o obj-$(CONFIG_TOUCHSCREEN_DA9034) += da9034-ts.o obj-$(CONFIG_TOUCHSCREEN_DYNAPRO) += dynapro.o obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE) += hampshire.o @@ -26,6 +29,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_EGALAX) += egalax_ts.o obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o +obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o @@ -45,6 +49,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o +obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC) += ti_tscadc.o obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c index 49a36df0b752..2c7692108e6c 100644 --- a/drivers/input/touchscreen/ad7877.c +++ b/drivers/input/touchscreen/ad7877.c @@ -860,17 +860,7 @@ static struct spi_driver ad7877_driver = { .remove = __devexit_p(ad7877_remove), }; -static int __init ad7877_init(void) -{ - return spi_register_driver(&ad7877_driver); -} -module_init(ad7877_init); - -static void __exit ad7877_exit(void) -{ - spi_unregister_driver(&ad7877_driver); -} -module_exit(ad7877_exit); +module_spi_driver(ad7877_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7877 touchscreen Driver"); diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c index 0dac6712f42b..3054354d0dd3 100644 --- a/drivers/input/touchscreen/ad7879-i2c.c +++ b/drivers/input/touchscreen/ad7879-i2c.c @@ -102,17 +102,7 @@ static struct i2c_driver ad7879_i2c_driver = { .id_table = ad7879_id, }; -static int __init ad7879_i2c_init(void) -{ - return i2c_add_driver(&ad7879_i2c_driver); -} -module_init(ad7879_i2c_init); - -static void __exit ad7879_i2c_exit(void) -{ - i2c_del_driver(&ad7879_i2c_driver); -} -module_exit(ad7879_i2c_exit); +module_i2c_driver(ad7879_i2c_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver"); diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c index 9b2e1c2b1971..db49abf056ba 100644 --- a/drivers/input/touchscreen/ad7879-spi.c +++ b/drivers/input/touchscreen/ad7879-spi.c @@ -157,17 +157,7 @@ static struct spi_driver ad7879_spi_driver = { .remove = __devexit_p(ad7879_spi_remove), }; -static int __init ad7879_spi_init(void) -{ - return spi_register_driver(&ad7879_spi_driver); -} -module_init(ad7879_spi_init); - -static void __exit ad7879_spi_exit(void) -{ - spi_unregister_driver(&ad7879_spi_driver); -} -module_exit(ad7879_spi_exit); +module_spi_driver(ad7879_spi_driver); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver"); diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c index 23fd90185659..f02028ec3db6 100644 --- a/drivers/input/touchscreen/ads7846.c +++ b/drivers/input/touchscreen/ads7846.c @@ -1433,17 +1433,7 @@ static struct spi_driver ads7846_driver = { .remove = __devexit_p(ads7846_remove), }; -static int __init ads7846_init(void) -{ - return spi_register_driver(&ads7846_driver); -} -module_init(ads7846_init); - -static void __exit ads7846_exit(void) -{ - spi_unregister_driver(&ads7846_driver); -} -module_exit(ads7846_exit); +module_spi_driver(ads7846_driver); MODULE_DESCRIPTION("ADS7846 TouchScreen Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c index 8034cbb20f74..c5c2dbb93869 100644 --- a/drivers/input/touchscreen/atmel-wm97xx.c +++ b/drivers/input/touchscreen/atmel-wm97xx.c @@ -392,9 +392,10 @@ static int __exit atmel_wm97xx_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM -static int atmel_wm97xx_suspend(struct platform_device *pdev, pm_message_t msg) +#ifdef CONFIG_PM_SLEEP +static int atmel_wm97xx_suspend(struct *dev) { + struct platform_device *pdev = to_platform_device(dev); struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev); ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT); @@ -404,8 +405,9 @@ static int atmel_wm97xx_suspend(struct platform_device *pdev, pm_message_t msg) return 0; } -static int atmel_wm97xx_resume(struct platform_device *pdev) +static int atmel_wm97xx_resume(struct device *dev) { + struct platform_device *pdev = to_platform_device(dev); struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev); struct wm97xx *wm = atmel_wm97xx->wm; @@ -416,18 +418,18 @@ static int atmel_wm97xx_resume(struct platform_device *pdev) return 0; } -#else -#define atmel_wm97xx_suspend NULL -#define atmel_wm97xx_resume NULL #endif +static SIMPLE_DEV_PM_OPS(atmel_wm97xx_pm_ops, + atmel_wm97xx_suspend, atmel_wm97xx_resume); + static struct platform_driver atmel_wm97xx_driver = { .remove = __exit_p(atmel_wm97xx_remove), .driver = { - .name = "wm97xx-touch", + .name = "wm97xx-touch", + .owner = THIS_MODULE, + .pm = &atmel_wm97xx_pm_ops, }, - .suspend = atmel_wm97xx_suspend, - .resume = atmel_wm97xx_resume, }; static int __init atmel_wm97xx_init(void) diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index a596c2775d1a..19d4ea65ea01 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -1267,18 +1267,7 @@ static struct i2c_driver mxt_driver = { .id_table = mxt_id, }; -static int __init mxt_init(void) -{ - return i2c_add_driver(&mxt_driver); -} - -static void __exit mxt_exit(void) -{ - i2c_del_driver(&mxt_driver); -} - -module_init(mxt_init); -module_exit(mxt_exit); +module_i2c_driver(mxt_driver); /* Module information */ MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c index 94fb9fbb08a9..c7047b6bb020 100644 --- a/drivers/input/touchscreen/auo-pixcir-ts.c +++ b/drivers/input/touchscreen/auo-pixcir-ts.c @@ -635,17 +635,7 @@ static struct i2c_driver auo_pixcir_driver = { .id_table = auo_pixcir_idtable, }; -static int __init auo_pixcir_init(void) -{ - return i2c_add_driver(&auo_pixcir_driver); -} -module_init(auo_pixcir_init); - -static void __exit auo_pixcir_exit(void) -{ - i2c_del_driver(&auo_pixcir_driver); -} -module_exit(auo_pixcir_exit); +module_i2c_driver(auo_pixcir_driver); MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c index 902c7214e887..f2d03c06c2da 100644 --- a/drivers/input/touchscreen/bu21013_ts.c +++ b/drivers/input/touchscreen/bu21013_ts.c @@ -652,30 +652,7 @@ static struct i2c_driver bu21013_driver = { .id_table = bu21013_id, }; -/** - * bu21013_init() - initializes the bu21013 touchscreen driver - * - * This function used to initializes the bu21013 - * touchscreen driver and returns integer. - */ -static int __init bu21013_init(void) -{ - return i2c_add_driver(&bu21013_driver); -} - -/** - * bu21013_exit() - de-initializes the bu21013 touchscreen driver - * - * This function uses to de-initializes the bu21013 - * touchscreen driver and returns none. - */ -static void __exit bu21013_exit(void) -{ - i2c_del_driver(&bu21013_driver); -} - -module_init(bu21013_init); -module_exit(bu21013_exit); +module_i2c_driver(bu21013_driver); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Naveen Kumar G <naveen.gaddipati@stericsson.com>"); diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c index d8815c5d54ad..237753ad1031 100644 --- a/drivers/input/touchscreen/cy8ctmg110_ts.c +++ b/drivers/input/touchscreen/cy8ctmg110_ts.c @@ -350,18 +350,7 @@ static struct i2c_driver cy8ctmg110_driver = { .remove = __devexit_p(cy8ctmg110_remove), }; -static int __init cy8ctmg110_init(void) -{ - return i2c_add_driver(&cy8ctmg110_driver); -} - -static void __exit cy8ctmg110_exit(void) -{ - i2c_del_driver(&cy8ctmg110_driver); -} - -module_init(cy8ctmg110_init); -module_exit(cy8ctmg110_exit); +module_i2c_driver(cy8ctmg110_driver); MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>"); MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver"); diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c new file mode 100644 index 000000000000..f030d9ec795d --- /dev/null +++ b/drivers/input/touchscreen/cyttsp_core.c @@ -0,0 +1,625 @@ +/* + * Core Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/slab.h> + +#include "cyttsp_core.h" + +/* Bootloader number of command keys */ +#define CY_NUM_BL_KEYS 8 + +/* helpers */ +#define GET_NUM_TOUCHES(x) ((x) & 0x0F) +#define IS_LARGE_AREA(x) (((x) & 0x10) >> 4) +#define IS_BAD_PKT(x) ((x) & 0x20) +#define IS_VALID_APP(x) ((x) & 0x01) +#define IS_OPERATIONAL_ERR(x) ((x) & 0x3F) +#define GET_HSTMODE(reg) (((reg) & 0x70) >> 4) +#define GET_BOOTLOADERMODE(reg) (((reg) & 0x10) >> 4) + +#define CY_REG_BASE 0x00 +#define CY_REG_ACT_DIST 0x1E +#define CY_REG_ACT_INTRVL 0x1D +#define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL + 1) +#define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT + 1) +#define CY_MAXZ 255 +#define CY_DELAY_DFLT 20 /* ms */ +#define CY_DELAY_MAX 500 +#define CY_ACT_DIST_DFLT 0xF8 +#define CY_HNDSHK_BIT 0x80 +/* device mode bits */ +#define CY_OPERATE_MODE 0x00 +#define CY_SYSINFO_MODE 0x10 +/* power mode select bits */ +#define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */ +#define CY_DEEP_SLEEP_MODE 0x02 +#define CY_LOW_POWER_MODE 0x04 + +/* Slots management */ +#define CY_MAX_FINGER 4 +#define CY_MAX_ID 16 + +static const u8 bl_command[] = { + 0x00, /* file offset */ + 0xFF, /* command */ + 0xA5, /* exit bootloader command */ + 0, 1, 2, 3, 4, 5, 6, 7 /* default keys */ +}; + +static int ttsp_read_block_data(struct cyttsp *ts, u8 command, + u8 length, void *buf) +{ + int error; + int tries; + + for (tries = 0; tries < CY_NUM_RETRY; tries++) { + error = ts->bus_ops->read(ts, command, length, buf); + if (!error) + return 0; + + msleep(CY_DELAY_DFLT); + } + + return -EIO; +} + +static int ttsp_write_block_data(struct cyttsp *ts, u8 command, + u8 length, void *buf) +{ + int error; + int tries; + + for (tries = 0; tries < CY_NUM_RETRY; tries++) { + error = ts->bus_ops->write(ts, command, length, buf); + if (!error) + return 0; + + msleep(CY_DELAY_DFLT); + } + + return -EIO; +} + +static int ttsp_send_command(struct cyttsp *ts, u8 cmd) +{ + return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd); +} + +static int cyttsp_load_bl_regs(struct cyttsp *ts) +{ + memset(&ts->bl_data, 0, sizeof(ts->bl_data)); + ts->bl_data.bl_status = 0x10; + + return ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->bl_data), &ts->bl_data); +} + +static int cyttsp_exit_bl_mode(struct cyttsp *ts) +{ + int error; + u8 bl_cmd[sizeof(bl_command)]; + + memcpy(bl_cmd, bl_command, sizeof(bl_command)); + if (ts->pdata->bl_keys) + memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS], + ts->pdata->bl_keys, sizeof(bl_command)); + + error = ttsp_write_block_data(ts, CY_REG_BASE, + sizeof(bl_cmd), bl_cmd); + if (error) + return error; + + /* wait for TTSP Device to complete the operation */ + msleep(CY_DELAY_DFLT); + + error = cyttsp_load_bl_regs(ts); + if (error) + return error; + + if (GET_BOOTLOADERMODE(ts->bl_data.bl_status)) + return -EIO; + + return 0; +} + +static int cyttsp_set_operational_mode(struct cyttsp *ts) +{ + int error; + + error = ttsp_send_command(ts, CY_OPERATE_MODE); + if (error) + return error; + + /* wait for TTSP Device to complete switch to Operational mode */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->xy_data), &ts->xy_data); + if (error) + return error; + + return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0; +} + +static int cyttsp_set_sysinfo_mode(struct cyttsp *ts) +{ + int error; + + memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data)); + + /* switch to sysinfo mode */ + error = ttsp_send_command(ts, CY_SYSINFO_MODE); + if (error) + return error; + + /* read sysinfo registers */ + msleep(CY_DELAY_DFLT); + error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data), + &ts->sysinfo_data); + if (error) + return error; + + if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl) + return -EIO; + + return 0; +} + +static int cyttsp_set_sysinfo_regs(struct cyttsp *ts) +{ + int retval = 0; + + if (ts->pdata->act_intrvl != CY_ACT_INTRVL_DFLT || + ts->pdata->tch_tmout != CY_TCH_TMOUT_DFLT || + ts->pdata->lp_intrvl != CY_LP_INTRVL_DFLT) { + + u8 intrvl_ray[] = { + ts->pdata->act_intrvl, + ts->pdata->tch_tmout, + ts->pdata->lp_intrvl + }; + + /* set intrvl registers */ + retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL, + sizeof(intrvl_ray), intrvl_ray); + msleep(CY_DELAY_DFLT); + } + + return retval; +} + +static int cyttsp_soft_reset(struct cyttsp *ts) +{ + unsigned long timeout; + int retval; + + /* wait for interrupt to set ready completion */ + INIT_COMPLETION(ts->bl_ready); + ts->state = CY_BL_STATE; + + enable_irq(ts->irq); + + retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE); + if (retval) + goto out; + + timeout = wait_for_completion_timeout(&ts->bl_ready, + msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX)); + retval = timeout ? 0 : -EIO; + +out: + ts->state = CY_IDLE_STATE; + disable_irq(ts->irq); + return retval; +} + +static int cyttsp_act_dist_setup(struct cyttsp *ts) +{ + u8 act_dist_setup = ts->pdata->act_dist; + + /* Init gesture; active distance setup */ + return ttsp_write_block_data(ts, CY_REG_ACT_DIST, + sizeof(act_dist_setup), &act_dist_setup); +} + +static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids) +{ + ids[0] = xy_data->touch12_id >> 4; + ids[1] = xy_data->touch12_id & 0xF; + ids[2] = xy_data->touch34_id >> 4; + ids[3] = xy_data->touch34_id & 0xF; +} + +static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data, + int idx) +{ + switch (idx) { + case 0: + return &xy_data->tch1; + case 1: + return &xy_data->tch2; + case 2: + return &xy_data->tch3; + case 3: + return &xy_data->tch4; + default: + return NULL; + } +} + +static void cyttsp_report_tchdata(struct cyttsp *ts) +{ + struct cyttsp_xydata *xy_data = &ts->xy_data; + struct input_dev *input = ts->input; + int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat); + const struct cyttsp_tch *tch; + int ids[CY_MAX_ID]; + int i; + DECLARE_BITMAP(used, CY_MAX_ID); + + if (IS_LARGE_AREA(xy_data->tt_stat) == 1) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Large area detected\n", __func__); + } else if (num_tch > CY_MAX_FINGER) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__); + } else if (IS_BAD_PKT(xy_data->tt_mode)) { + /* terminate all active tracks */ + num_tch = 0; + dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__); + } + + cyttsp_extract_track_ids(xy_data, ids); + + bitmap_zero(used, CY_MAX_ID); + + for (i = 0; i < num_tch; i++) { + tch = cyttsp_get_tch(xy_data, i); + + input_mt_slot(input, ids[i]); + input_mt_report_slot_state(input, MT_TOOL_FINGER, true); + input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x)); + input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y)); + input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z); + + __set_bit(ids[i], used); + } + + for (i = 0; i < CY_MAX_ID; i++) { + if (test_bit(i, used)) + continue; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, false); + } + + input_sync(input); +} + +static irqreturn_t cyttsp_irq(int irq, void *handle) +{ + struct cyttsp *ts = handle; + int error; + + if (unlikely(ts->state == CY_BL_STATE)) { + complete(&ts->bl_ready); + goto out; + } + + /* Get touch data from CYTTSP device */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(struct cyttsp_xydata), &ts->xy_data); + if (error) + goto out; + + /* provide flow control handshake */ + if (ts->pdata->use_hndshk) { + error = ttsp_send_command(ts, + ts->xy_data.hst_mode ^ CY_HNDSHK_BIT); + if (error) + goto out; + } + + if (unlikely(ts->state == CY_IDLE_STATE)) + goto out; + + if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) { + /* + * TTSP device has reset back to bootloader mode. + * Restore to operational mode. + */ + error = cyttsp_exit_bl_mode(ts); + if (error) { + dev_err(ts->dev, + "Could not return to operational mode, err: %d\n", + error); + ts->state = CY_IDLE_STATE; + } + } else { + cyttsp_report_tchdata(ts); + } + +out: + return IRQ_HANDLED; +} + +static int cyttsp_power_on(struct cyttsp *ts) +{ + int error; + + error = cyttsp_soft_reset(ts); + if (error) + return error; + + error = cyttsp_load_bl_regs(ts); + if (error) + return error; + + if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) && + IS_VALID_APP(ts->bl_data.bl_status)) { + error = cyttsp_exit_bl_mode(ts); + if (error) + return error; + } + + if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE || + IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) { + return -ENODEV; + } + + error = cyttsp_set_sysinfo_mode(ts); + if (error) + return error; + + error = cyttsp_set_sysinfo_regs(ts); + if (error) + return error; + + error = cyttsp_set_operational_mode(ts); + if (error) + return error; + + /* init active distance */ + error = cyttsp_act_dist_setup(ts); + if (error) + return error; + + ts->state = CY_ACTIVE_STATE; + + return 0; +} + +static int cyttsp_enable(struct cyttsp *ts) +{ + int error; + + /* + * The device firmware can wake on an I2C or SPI memory slave + * address match. So just reading a register is sufficient to + * wake up the device. The first read attempt will fail but it + * will wake it up making the second read attempt successful. + */ + error = ttsp_read_block_data(ts, CY_REG_BASE, + sizeof(ts->xy_data), &ts->xy_data); + if (error) + return error; + + if (GET_HSTMODE(ts->xy_data.hst_mode)) + return -EIO; + + enable_irq(ts->irq); + + return 0; +} + +static int cyttsp_disable(struct cyttsp *ts) +{ + int error; + + error = ttsp_send_command(ts, CY_LOW_POWER_MODE); + if (error) + return error; + + disable_irq(ts->irq); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int cyttsp_suspend(struct device *dev) +{ + struct cyttsp *ts = dev_get_drvdata(dev); + int retval = 0; + + mutex_lock(&ts->input->mutex); + + if (ts->input->users) { + retval = cyttsp_disable(ts); + if (retval == 0) + ts->suspended = true; + } + + mutex_unlock(&ts->input->mutex); + + return retval; +} + +static int cyttsp_resume(struct device *dev) +{ + struct cyttsp *ts = dev_get_drvdata(dev); + + mutex_lock(&ts->input->mutex); + + if (ts->input->users) + cyttsp_enable(ts); + + ts->suspended = false; + + mutex_unlock(&ts->input->mutex); + + return 0; +} + +#endif + +SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume); +EXPORT_SYMBOL_GPL(cyttsp_pm_ops); + +static int cyttsp_open(struct input_dev *dev) +{ + struct cyttsp *ts = input_get_drvdata(dev); + int retval = 0; + + if (!ts->suspended) + retval = cyttsp_enable(ts); + + return retval; +} + +static void cyttsp_close(struct input_dev *dev) +{ + struct cyttsp *ts = input_get_drvdata(dev); + + if (!ts->suspended) + cyttsp_disable(ts); +} + +struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, + struct device *dev, int irq, size_t xfer_buf_size) +{ + const struct cyttsp_platform_data *pdata = dev->platform_data; + struct cyttsp *ts; + struct input_dev *input_dev; + int error; + + if (!pdata || !pdata->name || irq <= 0) { + error = -EINVAL; + goto err_out; + } + + ts = kzalloc(sizeof(*ts) + xfer_buf_size, GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + ts->dev = dev; + ts->input = input_dev; + ts->pdata = dev->platform_data; + ts->bus_ops = bus_ops; + ts->irq = irq; + + init_completion(&ts->bl_ready); + snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev)); + + if (pdata->init) { + error = pdata->init(); + if (error) { + dev_err(ts->dev, "platform init failed, err: %d\n", + error); + goto err_free_mem; + } + } + + input_dev->name = pdata->name; + input_dev->phys = ts->phys; + input_dev->id.bustype = bus_ops->bustype; + input_dev->dev.parent = ts->dev; + + input_dev->open = cyttsp_open; + input_dev->close = cyttsp_close; + + input_set_drvdata(input_dev, ts); + + __set_bit(EV_ABS, input_dev->evbit); + input_set_abs_params(input_dev, ABS_MT_POSITION_X, + 0, pdata->maxx, 0, 0); + input_set_abs_params(input_dev, ABS_MT_POSITION_Y, + 0, pdata->maxy, 0, 0); + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, CY_MAXZ, 0, 0); + + input_mt_init_slots(input_dev, CY_MAX_ID); + + error = request_threaded_irq(ts->irq, NULL, cyttsp_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + pdata->name, ts); + if (error) { + dev_err(ts->dev, "failed to request IRQ %d, err: %d\n", + ts->irq, error); + goto err_platform_exit; + } + + disable_irq(ts->irq); + + error = cyttsp_power_on(ts); + if (error) + goto err_free_irq; + + error = input_register_device(input_dev); + if (error) { + dev_err(ts->dev, "failed to register input device: %d\n", + error); + goto err_free_irq; + } + + return ts; + +err_free_irq: + free_irq(ts->irq, ts); +err_platform_exit: + if (pdata->exit) + pdata->exit(); +err_free_mem: + input_free_device(input_dev); + kfree(ts); +err_out: + return ERR_PTR(error); +} +EXPORT_SYMBOL_GPL(cyttsp_probe); + +void cyttsp_remove(struct cyttsp *ts) +{ + free_irq(ts->irq, ts); + input_unregister_device(ts->input); + if (ts->pdata->exit) + ts->pdata->exit(); + kfree(ts); +} +EXPORT_SYMBOL_GPL(cyttsp_remove); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core"); +MODULE_AUTHOR("Cypress"); diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h new file mode 100644 index 000000000000..1aa3c6967e70 --- /dev/null +++ b/drivers/input/touchscreen/cyttsp_core.h @@ -0,0 +1,149 @@ +/* + * Header file for: + * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + + +#ifndef __CYTTSP_CORE_H__ +#define __CYTTSP_CORE_H__ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/device.h> +#include <linux/input/cyttsp.h> + +#define CY_NUM_RETRY 16 /* max number of retries for read ops */ + +struct cyttsp_tch { + __be16 x, y; + u8 z; +} __packed; + +/* TrueTouch Standard Product Gen3 interface definition */ +struct cyttsp_xydata { + u8 hst_mode; + u8 tt_mode; + u8 tt_stat; + struct cyttsp_tch tch1; + u8 touch12_id; + struct cyttsp_tch tch2; + u8 gest_cnt; + u8 gest_id; + struct cyttsp_tch tch3; + u8 touch34_id; + struct cyttsp_tch tch4; + u8 tt_undef[3]; + u8 act_dist; + u8 tt_reserved; +} __packed; + + +/* TTSP System Information interface definition */ +struct cyttsp_sysinfo_data { + u8 hst_mode; + u8 mfg_cmd; + u8 mfg_stat; + u8 cid[3]; + u8 tt_undef1; + u8 uid[8]; + u8 bl_verh; + u8 bl_verl; + u8 tts_verh; + u8 tts_verl; + u8 app_idh; + u8 app_idl; + u8 app_verh; + u8 app_verl; + u8 tt_undef[5]; + u8 scn_typ; + u8 act_intrvl; + u8 tch_tmout; + u8 lp_intrvl; +}; + +/* TTSP Bootloader Register Map interface definition */ +#define CY_BL_CHKSUM_OK 0x01 +struct cyttsp_bootloader_data { + u8 bl_file; + u8 bl_status; + u8 bl_error; + u8 blver_hi; + u8 blver_lo; + u8 bld_blver_hi; + u8 bld_blver_lo; + u8 ttspver_hi; + u8 ttspver_lo; + u8 appid_hi; + u8 appid_lo; + u8 appver_hi; + u8 appver_lo; + u8 cid_0; + u8 cid_1; + u8 cid_2; +}; + +struct cyttsp; + +struct cyttsp_bus_ops { + u16 bustype; + int (*write)(struct cyttsp *ts, + u8 addr, u8 length, const void *values); + int (*read)(struct cyttsp *ts, u8 addr, u8 length, void *values); +}; + +enum cyttsp_state { + CY_IDLE_STATE, + CY_ACTIVE_STATE, + CY_BL_STATE, +}; + +struct cyttsp { + struct device *dev; + int irq; + struct input_dev *input; + char phys[32]; + const struct cyttsp_platform_data *pdata; + const struct cyttsp_bus_ops *bus_ops; + struct cyttsp_bootloader_data bl_data; + struct cyttsp_sysinfo_data sysinfo_data; + struct cyttsp_xydata xy_data; + struct completion bl_ready; + enum cyttsp_state state; + bool suspended; + + u8 xfer_buf[] ____cacheline_aligned; +}; + +struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops, + struct device *dev, int irq, size_t xfer_buf_size); +void cyttsp_remove(struct cyttsp *ts); + +extern const struct dev_pm_ops cyttsp_pm_ops; + +#endif /* __CYTTSP_CORE_H__ */ diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c new file mode 100644 index 000000000000..2af1d0c52bcd --- /dev/null +++ b/drivers/input/touchscreen/cyttsp_i2c.c @@ -0,0 +1,136 @@ +/* + * Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include "cyttsp_core.h" + +#include <linux/i2c.h> +#include <linux/input.h> + +#define CY_I2C_DATA_SIZE 128 + +static int cyttsp_i2c_read_block_data(struct cyttsp *ts, + u8 addr, u8 length, void *values) +{ + struct i2c_client *client = to_i2c_client(ts->dev); + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = &addr, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = length, + .buf = values, + }, + }; + int retval; + + retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (retval < 0) + return retval; + + return retval != ARRAY_SIZE(msgs) ? -EIO : 0; +} + +static int cyttsp_i2c_write_block_data(struct cyttsp *ts, + u8 addr, u8 length, const void *values) +{ + struct i2c_client *client = to_i2c_client(ts->dev); + int retval; + + ts->xfer_buf[0] = addr; + memcpy(&ts->xfer_buf[1], values, length); + + retval = i2c_master_send(client, ts->xfer_buf, length + 1); + + return retval < 0 ? retval : 0; +} + +static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = { + .bustype = BUS_I2C, + .write = cyttsp_i2c_write_block_data, + .read = cyttsp_i2c_read_block_data, +}; + +static int __devinit cyttsp_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct cyttsp *ts; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "I2C functionality not Supported\n"); + return -EIO; + } + + ts = cyttsp_probe(&cyttsp_i2c_bus_ops, &client->dev, client->irq, + CY_I2C_DATA_SIZE); + + if (IS_ERR(ts)) + return PTR_ERR(ts); + + i2c_set_clientdata(client, ts); + + return 0; +} + +static int __devexit cyttsp_i2c_remove(struct i2c_client *client) +{ + struct cyttsp *ts = i2c_get_clientdata(client); + + cyttsp_remove(ts); + + return 0; +} + +static const struct i2c_device_id cyttsp_i2c_id[] = { + { CY_I2C_NAME, 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id); + +static struct i2c_driver cyttsp_i2c_driver = { + .driver = { + .name = CY_I2C_NAME, + .owner = THIS_MODULE, + .pm = &cyttsp_pm_ops, + }, + .probe = cyttsp_i2c_probe, + .remove = __devexit_p(cyttsp_i2c_remove), + .id_table = cyttsp_i2c_id, +}; + +module_i2c_driver(cyttsp_i2c_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver"); +MODULE_AUTHOR("Cypress"); +MODULE_ALIAS("i2c:cyttsp"); diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c new file mode 100644 index 000000000000..9f263410407b --- /dev/null +++ b/drivers/input/touchscreen/cyttsp_spi.c @@ -0,0 +1,200 @@ +/* + * Source for: + * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver. + * For use with Cypress Txx3xx parts. + * Supported parts include: + * CY8CTST341 + * CY8CTMA340 + * + * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc. + * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2, and only version 2, as published by the + * Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com> + * + */ + +#include "cyttsp_core.h" + +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/spi/spi.h> + +#define CY_SPI_WR_OP 0x00 /* r/~w */ +#define CY_SPI_RD_OP 0x01 +#define CY_SPI_CMD_BYTES 4 +#define CY_SPI_SYNC_BYTE 2 +#define CY_SPI_SYNC_ACK1 0x62 /* from protocol v.2 */ +#define CY_SPI_SYNC_ACK2 0x9D /* from protocol v.2 */ +#define CY_SPI_DATA_SIZE 128 +#define CY_SPI_DATA_BUF_SIZE (CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE) +#define CY_SPI_BITS_PER_WORD 8 + +static int cyttsp_spi_xfer(struct cyttsp *ts, + u8 op, u8 reg, u8 *buf, int length) +{ + struct spi_device *spi = to_spi_device(ts->dev); + struct spi_message msg; + struct spi_transfer xfer[2]; + u8 *wr_buf = &ts->xfer_buf[0]; + u8 *rd_buf = &ts->xfer_buf[CY_SPI_DATA_BUF_SIZE]; + int retval; + int i; + + if (length > CY_SPI_DATA_SIZE) { + dev_err(ts->dev, "%s: length %d is too big.\n", + __func__, length); + return -EINVAL; + } + + memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE); + memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE); + + wr_buf[0] = 0x00; /* header byte 0 */ + wr_buf[1] = 0xFF; /* header byte 1 */ + wr_buf[2] = reg; /* reg index */ + wr_buf[3] = op; /* r/~w */ + if (op == CY_SPI_WR_OP) + memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length); + + memset(xfer, 0, sizeof(xfer)); + spi_message_init(&msg); + + /* + We set both TX and RX buffers because Cypress TTSP + requires full duplex operation. + */ + xfer[0].tx_buf = wr_buf; + xfer[0].rx_buf = rd_buf; + switch (op) { + case CY_SPI_WR_OP: + xfer[0].len = length + CY_SPI_CMD_BYTES; + spi_message_add_tail(&xfer[0], &msg); + break; + + case CY_SPI_RD_OP: + xfer[0].len = CY_SPI_CMD_BYTES; + spi_message_add_tail(&xfer[0], &msg); + + xfer[1].rx_buf = buf; + xfer[1].len = length; + spi_message_add_tail(&xfer[1], &msg); + break; + + default: + dev_err(ts->dev, "%s: bad operation code=%d\n", __func__, op); + return -EINVAL; + } + + retval = spi_sync(spi, &msg); + if (retval < 0) { + dev_dbg(ts->dev, "%s: spi_sync() error %d, len=%d, op=%d\n", + __func__, retval, xfer[1].len, op); + + /* + * do not return here since was a bad ACK sequence + * let the following ACK check handle any errors and + * allow silent retries + */ + } + + if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 || + rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) { + + dev_dbg(ts->dev, "%s: operation %d failed\n", __func__, op); + + for (i = 0; i < CY_SPI_CMD_BYTES; i++) + dev_dbg(ts->dev, "%s: test rd_buf[%d]:0x%02x\n", + __func__, i, rd_buf[i]); + for (i = 0; i < length; i++) + dev_dbg(ts->dev, "%s: test buf[%d]:0x%02x\n", + __func__, i, buf[i]); + + return -EIO; + } + + return 0; +} + +static int cyttsp_spi_read_block_data(struct cyttsp *ts, + u8 addr, u8 length, void *data) +{ + return cyttsp_spi_xfer(ts, CY_SPI_RD_OP, addr, data, length); +} + +static int cyttsp_spi_write_block_data(struct cyttsp *ts, + u8 addr, u8 length, const void *data) +{ + return cyttsp_spi_xfer(ts, CY_SPI_WR_OP, addr, (void *)data, length); +} + +static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = { + .bustype = BUS_SPI, + .write = cyttsp_spi_write_block_data, + .read = cyttsp_spi_read_block_data, +}; + +static int __devinit cyttsp_spi_probe(struct spi_device *spi) +{ + struct cyttsp *ts; + int error; + + /* Set up SPI*/ + spi->bits_per_word = CY_SPI_BITS_PER_WORD; + spi->mode = SPI_MODE_0; + error = spi_setup(spi); + if (error < 0) { + dev_err(&spi->dev, "%s: SPI setup error %d\n", + __func__, error); + return error; + } + + ts = cyttsp_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq, + CY_SPI_DATA_BUF_SIZE * 2); + if (IS_ERR(ts)) + return PTR_ERR(ts); + + spi_set_drvdata(spi, ts); + + return 0; +} + +static int __devexit cyttsp_spi_remove(struct spi_device *spi) +{ + struct cyttsp *ts = spi_get_drvdata(spi); + + cyttsp_remove(ts); + + return 0; +} + +static struct spi_driver cyttsp_spi_driver = { + .driver = { + .name = CY_SPI_NAME, + .owner = THIS_MODULE, + .pm = &cyttsp_pm_ops, + }, + .probe = cyttsp_spi_probe, + .remove = __devexit_p(cyttsp_spi_remove), +}; + +module_spi_driver(cyttsp_spi_driver); + +MODULE_ALIAS("spi:cyttsp"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver"); +MODULE_AUTHOR("Cypress"); +MODULE_ALIAS("spi:cyttsp"); diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c index 1df19bb8534a..503c7096ed36 100644 --- a/drivers/input/touchscreen/eeti_ts.c +++ b/drivers/input/touchscreen/eeti_ts.c @@ -320,20 +320,8 @@ static struct i2c_driver eeti_ts_driver = { .id_table = eeti_ts_id, }; -static int __init eeti_ts_init(void) -{ - return i2c_add_driver(&eeti_ts_driver); -} - -static void __exit eeti_ts_exit(void) -{ - i2c_del_driver(&eeti_ts_driver); -} +module_i2c_driver(eeti_ts_driver); MODULE_DESCRIPTION("EETI Touchscreen driver"); MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>"); MODULE_LICENSE("GPL"); - -module_init(eeti_ts_init); -module_exit(eeti_ts_exit); - diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index eadcc2e83c77..70524dd34f42 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -285,18 +285,7 @@ static struct i2c_driver egalax_ts_driver = { .remove = __devexit_p(egalax_ts_remove), }; -static int __init egalax_ts_init(void) -{ - return i2c_add_driver(&egalax_ts_driver); -} - -static void __exit egalax_ts_exit(void) -{ - i2c_del_driver(&egalax_ts_driver); -} - -module_init(egalax_ts_init); -module_exit(egalax_ts_exit); +module_i2c_driver(egalax_ts_driver); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller"); diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c index 639a6044183d..85cf9bee8018 100644 --- a/drivers/input/touchscreen/hp680_ts_input.c +++ b/drivers/input/touchscreen/hp680_ts_input.c @@ -93,7 +93,7 @@ static int __init hp680_ts_init(void) hp680_ts_dev->phys = "hp680_ts/input0"; if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt, - 0, MODNAME, 0) < 0) { + 0, MODNAME, NULL) < 0) { printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n", HP680_TS_IRQ); err = -EBUSY; diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c new file mode 100644 index 000000000000..c0044175a921 --- /dev/null +++ b/drivers/input/touchscreen/ili210x.c @@ -0,0 +1,360 @@ +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/delay.h> +#include <linux/workqueue.h> +#include <linux/input/ili210x.h> + +#define MAX_TOUCHES 2 +#define DEFAULT_POLL_PERIOD 20 + +/* Touchscreen commands */ +#define REG_TOUCHDATA 0x10 +#define REG_PANEL_INFO 0x20 +#define REG_FIRMWARE_VERSION 0x40 +#define REG_CALIBRATE 0xcc + +struct finger { + u8 x_low; + u8 x_high; + u8 y_low; + u8 y_high; +} __packed; + +struct touchdata { + u8 status; + struct finger finger[MAX_TOUCHES]; +} __packed; + +struct panel_info { + struct finger finger_max; + u8 xchannel_num; + u8 ychannel_num; +} __packed; + +struct firmware_version { + u8 id; + u8 major; + u8 minor; +} __packed; + +struct ili210x { + struct i2c_client *client; + struct input_dev *input; + bool (*get_pendown_state)(void); + unsigned int poll_period; + struct delayed_work dwork; +}; + +static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf, + size_t len) +{ + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = 0, + .len = 1, + .buf = ®, + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = len, + .buf = buf, + } + }; + + if (i2c_transfer(client->adapter, msg, 2) != 2) { + dev_err(&client->dev, "i2c transfer failed\n"); + return -EIO; + } + + return 0; +} + +static void ili210x_report_events(struct input_dev *input, + const struct touchdata *touchdata) +{ + int i; + bool touch; + unsigned int x, y; + const struct finger *finger; + + for (i = 0; i < MAX_TOUCHES; i++) { + input_mt_slot(input, i); + + finger = &touchdata->finger[i]; + + touch = touchdata->status & (1 << i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); + if (touch) { + x = finger->x_low | (finger->x_high << 8); + y = finger->y_low | (finger->y_high << 8); + + input_report_abs(input, ABS_MT_POSITION_X, x); + input_report_abs(input, ABS_MT_POSITION_Y, y); + } + } + + input_mt_report_pointer_emulation(input, false); + input_sync(input); +} + +static bool get_pendown_state(const struct ili210x *priv) +{ + bool state = false; + + if (priv->get_pendown_state) + state = priv->get_pendown_state(); + + return state; +} + +static void ili210x_work(struct work_struct *work) +{ + struct ili210x *priv = container_of(work, struct ili210x, + dwork.work); + struct i2c_client *client = priv->client; + struct touchdata touchdata; + int error; + + error = ili210x_read_reg(client, REG_TOUCHDATA, + &touchdata, sizeof(touchdata)); + if (error) { + dev_err(&client->dev, + "Unable to get touchdata, err = %d\n", error); + return; + } + + ili210x_report_events(priv->input, &touchdata); + + if ((touchdata.status & 0xf3) || get_pendown_state(priv)) + schedule_delayed_work(&priv->dwork, + msecs_to_jiffies(priv->poll_period)); +} + +static irqreturn_t ili210x_irq(int irq, void *irq_data) +{ + struct ili210x *priv = irq_data; + + schedule_delayed_work(&priv->dwork, 0); + + return IRQ_HANDLED; +} + +static ssize_t ili210x_calibrate(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct i2c_client *client = to_i2c_client(dev); + struct ili210x *priv = i2c_get_clientdata(client); + unsigned long calibrate; + int rc; + u8 cmd = REG_CALIBRATE; + + if (kstrtoul(buf, 10, &calibrate)) + return -EINVAL; + + if (calibrate > 1) + return -EINVAL; + + if (calibrate) { + rc = i2c_master_send(priv->client, &cmd, sizeof(cmd)); + if (rc != sizeof(cmd)) + return -EIO; + } + + return count; +} +static DEVICE_ATTR(calibrate, 0644, NULL, ili210x_calibrate); + +static struct attribute *ili210x_attributes[] = { + &dev_attr_calibrate.attr, + NULL, +}; + +static const struct attribute_group ili210x_attr_group = { + .attrs = ili210x_attributes, +}; + +static int __devinit ili210x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + const struct ili210x_platform_data *pdata = dev->platform_data; + struct ili210x *priv; + struct input_dev *input; + struct panel_info panel; + struct firmware_version firmware; + int xmax, ymax; + int error; + + dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver"); + + if (!pdata) { + dev_err(dev, "No platform data!\n"); + return -EINVAL; + } + + if (client->irq <= 0) { + dev_err(dev, "No IRQ!\n"); + return -EINVAL; + } + + /* Get firmware version */ + error = ili210x_read_reg(client, REG_FIRMWARE_VERSION, + &firmware, sizeof(firmware)); + if (error) { + dev_err(dev, "Failed to get firmware version, err: %d\n", + error); + return error; + } + + /* get panel info */ + error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel)); + if (error) { + dev_err(dev, "Failed to get panel informations, err: %d\n", + error); + return error; + } + + xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8); + ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8); + + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + input = input_allocate_device(); + if (!priv || !input) { + error = -ENOMEM; + goto err_free_mem; + } + + priv->client = client; + priv->input = input; + priv->get_pendown_state = pdata->get_pendown_state; + priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD; + INIT_DELAYED_WORK(&priv->dwork, ili210x_work); + + /* Setup input device */ + input->name = "ILI210x Touchscreen"; + input->id.bustype = BUS_I2C; + input->dev.parent = dev; + + __set_bit(EV_SYN, input->evbit); + __set_bit(EV_KEY, input->evbit); + __set_bit(EV_ABS, input->evbit); + __set_bit(BTN_TOUCH, input->keybit); + + /* Single touch */ + input_set_abs_params(input, ABS_X, 0, xmax, 0, 0); + input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0); + + /* Multi touch */ + input_mt_init_slots(input, MAX_TOUCHES); + input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0); + + input_set_drvdata(input, priv); + i2c_set_clientdata(client, priv); + + error = request_irq(client->irq, ili210x_irq, pdata->irq_flags, + client->name, priv); + if (error) { + dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n", + error); + goto err_free_mem; + } + + error = sysfs_create_group(&dev->kobj, &ili210x_attr_group); + if (error) { + dev_err(dev, "Unable to create sysfs attributes, err: %d\n", + error); + goto err_free_irq; + } + + error = input_register_device(priv->input); + if (error) { + dev_err(dev, "Cannot regiser input device, err: %d\n", error); + goto err_remove_sysfs; + } + + device_init_wakeup(&client->dev, 1); + + dev_dbg(dev, + "ILI210x initialized (IRQ: %d), firmware version %d.%d.%d", + client->irq, firmware.id, firmware.major, firmware.minor); + + return 0; + +err_remove_sysfs: + sysfs_remove_group(&dev->kobj, &ili210x_attr_group); +err_free_irq: + free_irq(client->irq, priv); +err_free_mem: + input_free_device(input); + kfree(priv); + return error; +} + +static int __devexit ili210x_i2c_remove(struct i2c_client *client) +{ + struct ili210x *priv = i2c_get_clientdata(client); + + sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group); + free_irq(priv->client->irq, priv); + cancel_delayed_work_sync(&priv->dwork); + input_unregister_device(priv->input); + kfree(priv); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int ili210x_i2c_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + enable_irq_wake(client->irq); + + return 0; +} + +static int ili210x_i2c_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev)) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm, + ili210x_i2c_suspend, ili210x_i2c_resume); + +static const struct i2c_device_id ili210x_i2c_id[] = { + { "ili210x", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id); + +static struct i2c_driver ili210x_ts_driver = { + .driver = { + .name = "ili210x_i2c", + .owner = THIS_MODULE, + .pm = &ili210x_i2c_pm, + }, + .id_table = ili210x_i2c_id, + .probe = ili210x_i2c_probe, + .remove = __devexit_p(ili210x_i2c_remove), +}; + +module_i2c_driver(ili210x_ts_driver); + +MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>"); +MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c index 4627fe55b401..4eab50b856d7 100644 --- a/drivers/input/touchscreen/max11801_ts.c +++ b/drivers/input/touchscreen/max11801_ts.c @@ -255,18 +255,7 @@ static struct i2c_driver max11801_ts_driver = { .remove = __devexit_p(max11801_ts_remove), }; -static int __init max11801_ts_init(void) -{ - return i2c_add_driver(&max11801_ts_driver); -} - -static void __exit max11801_ts_exit(void) -{ - i2c_del_driver(&max11801_ts_driver); -} - -module_init(max11801_ts_init); -module_exit(max11801_ts_exit); +module_i2c_driver(max11801_ts_driver); MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>"); MODULE_DESCRIPTION("Touchscreen driver for MAXI MAX11801 controller"); diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c index 2d84c80ceb66..b528511861ce 100644 --- a/drivers/input/touchscreen/mcs5000_ts.c +++ b/drivers/input/touchscreen/mcs5000_ts.c @@ -302,18 +302,7 @@ static struct i2c_driver mcs5000_ts_driver = { .id_table = mcs5000_ts_id, }; -static int __init mcs5000_ts_init(void) -{ - return i2c_add_driver(&mcs5000_ts_driver); -} - -static void __exit mcs5000_ts_exit(void) -{ - i2c_del_driver(&mcs5000_ts_driver); -} - -module_init(mcs5000_ts_init); -module_exit(mcs5000_ts_exit); +module_i2c_driver(mcs5000_ts_driver); /* Module information */ MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c index 5226194aa78e..c038db93e2c3 100644 --- a/drivers/input/touchscreen/migor_ts.c +++ b/drivers/input/touchscreen/migor_ts.c @@ -242,19 +242,8 @@ static struct i2c_driver migor_ts_driver = { .id_table = migor_ts_id, }; -static int __init migor_ts_init(void) -{ - return i2c_add_driver(&migor_ts_driver); -} - -static void __exit migor_ts_exit(void) -{ - i2c_del_driver(&migor_ts_driver); -} +module_i2c_driver(migor_ts_driver); MODULE_DESCRIPTION("MigoR Touchscreen driver"); MODULE_AUTHOR("Magnus Damm <damm@opensource.se>"); MODULE_LICENSE("GPL"); - -module_init(migor_ts_init); -module_exit(migor_ts_exit); diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index d5ac09a1ee56..72f6ba3a4709 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -222,17 +222,7 @@ static struct i2c_driver pixcir_i2c_ts_driver = { .id_table = pixcir_i2c_ts_id, }; -static int __init pixcir_i2c_ts_init(void) -{ - return i2c_add_driver(&pixcir_i2c_ts_driver); -} -module_init(pixcir_i2c_ts_init); - -static void __exit pixcir_i2c_ts_exit(void) -{ - i2c_del_driver(&pixcir_i2c_ts_driver); -} -module_exit(pixcir_i2c_ts_exit); +module_i2c_driver(pixcir_i2c_ts_driver); MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>"); MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver"); diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c index 8825fe37d433..cbbf71b22696 100644 --- a/drivers/input/touchscreen/st1232.c +++ b/drivers/input/touchscreen/st1232.c @@ -268,17 +268,7 @@ static struct i2c_driver st1232_ts_driver = { }, }; -static int __init st1232_ts_init(void) -{ - return i2c_add_driver(&st1232_ts_driver); -} -module_init(st1232_ts_init); - -static void __exit st1232_ts_exit(void) -{ - i2c_del_driver(&st1232_ts_driver); -} -module_exit(st1232_ts_exit); +module_i2c_driver(st1232_ts_driver); MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>"); MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver"); diff --git a/drivers/input/touchscreen/ti_tscadc.c b/drivers/input/touchscreen/ti_tscadc.c new file mode 100644 index 000000000000..d229c741d544 --- /dev/null +++ b/drivers/input/touchscreen/ti_tscadc.c @@ -0,0 +1,486 @@ +/* + * TI Touch Screen driver + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/input/ti_tscadc.h> +#include <linux/delay.h> + +#define REG_IRQEOI 0x020 +#define REG_RAWIRQSTATUS 0x024 +#define REG_IRQSTATUS 0x028 +#define REG_IRQENABLE 0x02C +#define REG_IRQWAKEUP 0x034 +#define REG_CTRL 0x040 +#define REG_ADCFSM 0x044 +#define REG_CLKDIV 0x04C +#define REG_SE 0x054 +#define REG_IDLECONFIG 0x058 +#define REG_CHARGECONFIG 0x05C +#define REG_CHARGEDELAY 0x060 +#define REG_STEPCONFIG(n) (0x64 + ((n - 1) * 8)) +#define REG_STEPDELAY(n) (0x68 + ((n - 1) * 8)) +#define REG_STEPCONFIG13 0x0C4 +#define REG_STEPDELAY13 0x0C8 +#define REG_STEPCONFIG14 0x0CC +#define REG_STEPDELAY14 0x0D0 +#define REG_FIFO0CNT 0xE4 +#define REG_FIFO1THR 0xF4 +#define REG_FIFO0 0x100 +#define REG_FIFO1 0x200 + +/* Register Bitfields */ +#define IRQWKUP_ENB BIT(0) +#define STPENB_STEPENB 0x7FFF +#define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_PENUP BIT(9) +#define STEPCONFIG_MODE_HWSYNC 0x2 +#define STEPCONFIG_SAMPLES_AVG (1 << 4) +#define STEPCONFIG_XPP (1 << 5) +#define STEPCONFIG_XNN (1 << 6) +#define STEPCONFIG_YPP (1 << 7) +#define STEPCONFIG_YNN (1 << 8) +#define STEPCONFIG_XNP (1 << 9) +#define STEPCONFIG_YPN (1 << 10) +#define STEPCONFIG_INM (1 << 18) +#define STEPCONFIG_INP (1 << 20) +#define STEPCONFIG_INP_5 (1 << 21) +#define STEPCONFIG_FIFO1 (1 << 26) +#define STEPCONFIG_OPENDLY 0xff +#define STEPCONFIG_Z1 (3 << 19) +#define STEPIDLE_INP (1 << 22) +#define STEPCHARGE_RFP (1 << 12) +#define STEPCHARGE_INM (1 << 15) +#define STEPCHARGE_INP (1 << 19) +#define STEPCHARGE_RFM (1 << 23) +#define STEPCHARGE_DELAY 0x1 +#define CNTRLREG_TSCSSENB (1 << 0) +#define CNTRLREG_STEPID (1 << 1) +#define CNTRLREG_STEPCONFIGWRT (1 << 2) +#define CNTRLREG_4WIRE (1 << 5) +#define CNTRLREG_5WIRE (1 << 6) +#define CNTRLREG_8WIRE (3 << 5) +#define CNTRLREG_TSCENB (1 << 7) +#define ADCFSM_STEPID 0x10 + +#define SEQ_SETTLE 275 +#define ADC_CLK 3000000 +#define MAX_12BIT ((1 << 12) - 1) +#define TSCADC_DELTA_X 15 +#define TSCADC_DELTA_Y 15 + +struct tscadc { + struct input_dev *input; + struct clk *tsc_ick; + void __iomem *tsc_base; + unsigned int irq; + unsigned int wires; + unsigned int x_plate_resistance; + bool pen_down; +}; + +static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg) +{ + return readl(ts->tsc_base + reg); +} + +static void tscadc_writel(struct tscadc *tsc, unsigned int reg, + unsigned int val) +{ + writel(val, tsc->tsc_base + reg); +} + +static void tscadc_step_config(struct tscadc *ts_dev) +{ + unsigned int config; + int i; + + /* Configure the Step registers */ + + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_XPP; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_INP | STEPCONFIG_XNN; + break; + case 5: + config |= STEPCONFIG_YNN | + STEPCONFIG_INP_5 | STEPCONFIG_XNN | + STEPCONFIG_YPP; + break; + case 8: + config |= STEPCONFIG_INP | STEPCONFIG_XNN; + break; + } + + for (i = 1; i < 7; i++) { + tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); + tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YNN | + STEPCONFIG_INM | STEPCONFIG_FIFO1; + switch (ts_dev->wires) { + case 4: + config |= STEPCONFIG_YPP; + break; + case 5: + config |= STEPCONFIG_XPP | STEPCONFIG_INP_5 | + STEPCONFIG_XNP | STEPCONFIG_YPN; + break; + case 8: + config |= STEPCONFIG_YPP; + break; + } + + for (i = 7; i < 13; i++) { + tscadc_writel(ts_dev, REG_STEPCONFIG(i), config); + tscadc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY); + } + + config = 0; + /* Charge step configuration */ + config = STEPCONFIG_XPP | STEPCONFIG_YNN | + STEPCHARGE_RFP | STEPCHARGE_RFM | + STEPCHARGE_INM | STEPCHARGE_INP; + + tscadc_writel(ts_dev, REG_CHARGECONFIG, config); + tscadc_writel(ts_dev, REG_CHARGEDELAY, STEPCHARGE_DELAY); + + config = 0; + /* Configure to calculate pressure */ + config = STEPCONFIG_MODE_HWSYNC | + STEPCONFIG_SAMPLES_AVG | STEPCONFIG_YPP | + STEPCONFIG_XNN | STEPCONFIG_INM; + tscadc_writel(ts_dev, REG_STEPCONFIG13, config); + tscadc_writel(ts_dev, REG_STEPDELAY13, STEPCONFIG_OPENDLY); + + config |= STEPCONFIG_Z1 | STEPCONFIG_FIFO1; + tscadc_writel(ts_dev, REG_STEPCONFIG14, config); + tscadc_writel(ts_dev, REG_STEPDELAY14, STEPCONFIG_OPENDLY); + + tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); +} + +static void tscadc_idle_config(struct tscadc *ts_config) +{ + unsigned int idleconfig; + + idleconfig = STEPCONFIG_YNN | + STEPCONFIG_INM | + STEPCONFIG_YPN | STEPIDLE_INP; + tscadc_writel(ts_config, REG_IDLECONFIG, idleconfig); +} + +static void tscadc_read_coordinates(struct tscadc *ts_dev, + unsigned int *x, unsigned int *y) +{ + unsigned int fifocount = tscadc_readl(ts_dev, REG_FIFO0CNT); + unsigned int prev_val_x = ~0, prev_val_y = ~0; + unsigned int prev_diff_x = ~0, prev_diff_y = ~0; + unsigned int read, diff; + unsigned int i; + + /* + * Delta filter is used to remove large variations in sampled + * values from ADC. The filter tries to predict where the next + * coordinate could be. This is done by taking a previous + * coordinate and subtracting it form current one. Further the + * algorithm compares the difference with that of a present value, + * if true the value is reported to the sub system. + */ + for (i = 0; i < fifocount - 1; i++) { + read = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; + diff = abs(read - prev_val_x); + if (diff < prev_diff_x) { + prev_diff_x = diff; + *x = read; + } + prev_val_x = read; + + read = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; + diff = abs(read - prev_val_y); + if (diff < prev_diff_y) { + prev_diff_y = diff; + *y = read; + } + prev_val_y = read; + } +} + +static irqreturn_t tscadc_irq(int irq, void *dev) +{ + struct tscadc *ts_dev = dev; + struct input_dev *input_dev = ts_dev->input; + unsigned int status, irqclr = 0; + unsigned int x = 0, y = 0; + unsigned int z1, z2, z; + unsigned int fsm; + + status = tscadc_readl(ts_dev, REG_IRQSTATUS); + if (status & IRQENB_FIFO1THRES) { + tscadc_read_coordinates(ts_dev, &x, &y); + + z1 = tscadc_readl(ts_dev, REG_FIFO0) & 0xfff; + z2 = tscadc_readl(ts_dev, REG_FIFO1) & 0xfff; + + if (ts_dev->pen_down && z1 != 0 && z2 != 0) { + /* + * Calculate pressure using formula + * Resistance(touch) = x plate resistance * + * x postion/4096 * ((z2 / z1) - 1) + */ + z = z2 - z1; + z *= x; + z *= ts_dev->x_plate_resistance; + z /= z1; + z = (z + 2047) >> 12; + + if (z <= MAX_12BIT) { + input_report_abs(input_dev, ABS_X, x); + input_report_abs(input_dev, ABS_Y, y); + input_report_abs(input_dev, ABS_PRESSURE, z); + input_report_key(input_dev, BTN_TOUCH, 1); + input_sync(input_dev); + } + } + irqclr |= IRQENB_FIFO1THRES; + } + + /* + * Time for sequencer to settle, to read + * correct state of the sequencer. + */ + udelay(SEQ_SETTLE); + + status = tscadc_readl(ts_dev, REG_RAWIRQSTATUS); + if (status & IRQENB_PENUP) { + /* Pen up event */ + fsm = tscadc_readl(ts_dev, REG_ADCFSM); + if (fsm == ADCFSM_STEPID) { + ts_dev->pen_down = false; + input_report_key(input_dev, BTN_TOUCH, 0); + input_report_abs(input_dev, ABS_PRESSURE, 0); + input_sync(input_dev); + } else { + ts_dev->pen_down = true; + } + irqclr |= IRQENB_PENUP; + } + + tscadc_writel(ts_dev, REG_IRQSTATUS, irqclr); + /* check pending interrupts */ + tscadc_writel(ts_dev, REG_IRQEOI, 0x0); + + tscadc_writel(ts_dev, REG_SE, STPENB_STEPENB); + return IRQ_HANDLED; +} + +/* + * The functions for inserting/removing driver as a module. + */ + +static int __devinit tscadc_probe(struct platform_device *pdev) +{ + const struct tsc_data *pdata = pdev->dev.platform_data; + struct resource *res; + struct tscadc *ts_dev; + struct input_dev *input_dev; + struct clk *clk; + int err; + int clk_value, ctrl, irq; + + if (!pdata) { + dev_err(&pdev->dev, "missing platform data.\n"); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "no memory resource defined.\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "no irq ID is specified.\n"); + return -EINVAL; + } + + /* Allocate memory for device */ + ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!ts_dev || !input_dev) { + dev_err(&pdev->dev, "failed to allocate memory.\n"); + err = -ENOMEM; + goto err_free_mem; + } + + ts_dev->input = input_dev; + ts_dev->irq = irq; + ts_dev->wires = pdata->wires; + ts_dev->x_plate_resistance = pdata->x_plate_resistance; + + res = request_mem_region(res->start, resource_size(res), pdev->name); + if (!res) { + dev_err(&pdev->dev, "failed to reserve registers.\n"); + err = -EBUSY; + goto err_free_mem; + } + + ts_dev->tsc_base = ioremap(res->start, resource_size(res)); + if (!ts_dev->tsc_base) { + dev_err(&pdev->dev, "failed to map registers.\n"); + err = -ENOMEM; + goto err_release_mem_region; + } + + err = request_irq(ts_dev->irq, tscadc_irq, + 0, pdev->dev.driver->name, ts_dev); + if (err) { + dev_err(&pdev->dev, "failed to allocate irq.\n"); + goto err_unmap_regs; + } + + ts_dev->tsc_ick = clk_get(&pdev->dev, "adc_tsc_ick"); + if (IS_ERR(ts_dev->tsc_ick)) { + dev_err(&pdev->dev, "failed to get TSC ick\n"); + goto err_free_irq; + } + clk_enable(ts_dev->tsc_ick); + + clk = clk_get(&pdev->dev, "adc_tsc_fck"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "failed to get TSC fck\n"); + err = PTR_ERR(clk); + goto err_disable_clk; + } + + clk_value = clk_get_rate(clk) / ADC_CLK; + clk_put(clk); + + if (clk_value < 7) { + dev_err(&pdev->dev, "clock input less than min clock requirement\n"); + goto err_disable_clk; + } + /* CLKDIV needs to be configured to the value minus 1 */ + tscadc_writel(ts_dev, REG_CLKDIV, clk_value - 1); + + /* Enable wake-up of the SoC using touchscreen */ + tscadc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB); + + ctrl = CNTRLREG_STEPCONFIGWRT | + CNTRLREG_TSCENB | + CNTRLREG_STEPID; + switch (ts_dev->wires) { + case 4: + ctrl |= CNTRLREG_4WIRE; + break; + case 5: + ctrl |= CNTRLREG_5WIRE; + break; + case 8: + ctrl |= CNTRLREG_8WIRE; + break; + } + tscadc_writel(ts_dev, REG_CTRL, ctrl); + + tscadc_idle_config(ts_dev); + tscadc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO1THRES); + tscadc_step_config(ts_dev); + tscadc_writel(ts_dev, REG_FIFO1THR, 6); + + ctrl |= CNTRLREG_TSCSSENB; + tscadc_writel(ts_dev, REG_CTRL, ctrl); + + input_dev->name = "ti-tsc-adc"; + input_dev->dev.parent = &pdev->dev; + + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); + + input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0); + + /* register to the input system */ + err = input_register_device(input_dev); + if (err) + goto err_disable_clk; + + platform_set_drvdata(pdev, ts_dev); + return 0; + +err_disable_clk: + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); +err_free_irq: + free_irq(ts_dev->irq, ts_dev); +err_unmap_regs: + iounmap(ts_dev->tsc_base); +err_release_mem_region: + release_mem_region(res->start, resource_size(res)); +err_free_mem: + input_free_device(input_dev); + kfree(ts_dev); + return err; +} + +static int __devexit tscadc_remove(struct platform_device *pdev) +{ + struct tscadc *ts_dev = platform_get_drvdata(pdev); + struct resource *res; + + free_irq(ts_dev->irq, ts_dev); + + input_unregister_device(ts_dev->input); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + iounmap(ts_dev->tsc_base); + release_mem_region(res->start, resource_size(res)); + + clk_disable(ts_dev->tsc_ick); + clk_put(ts_dev->tsc_ick); + + kfree(ts_dev); + + platform_set_drvdata(pdev, NULL); + return 0; +} + +static struct platform_driver ti_tsc_driver = { + .probe = tscadc_probe, + .remove = __devexit_p(tscadc_remove), + .driver = { + .name = "tsc", + .owner = THIS_MODULE, + }, +}; +module_platform_driver(ti_tsc_driver); + +MODULE_DESCRIPTION("TI touchscreen controller driver"); +MODULE_AUTHOR("Rachna Patil <rachna@ti.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c index 067d95662997..b6adeaee9cc5 100644 --- a/drivers/input/touchscreen/tsc2005.c +++ b/drivers/input/touchscreen/tsc2005.c @@ -747,17 +747,7 @@ static struct spi_driver tsc2005_driver = { .remove = __devexit_p(tsc2005_remove), }; -static int __init tsc2005_init(void) -{ - return spi_register_driver(&tsc2005_driver); -} -module_init(tsc2005_init); - -static void __exit tsc2005_exit(void) -{ - spi_unregister_driver(&tsc2005_driver); -} -module_exit(tsc2005_exit); +module_spi_driver(tsc2005_driver); MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>"); MODULE_DESCRIPTION("TSC2005 Touchscreen Driver"); diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 1f674cb6c55b..1473d2382afd 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -399,18 +399,7 @@ static struct i2c_driver tsc2007_driver = { .remove = __devexit_p(tsc2007_remove), }; -static int __init tsc2007_init(void) -{ - return i2c_add_driver(&tsc2007_driver); -} - -static void __exit tsc2007_exit(void) -{ - i2c_del_driver(&tsc2007_driver); -} - -module_init(tsc2007_init); -module_exit(tsc2007_exit); +module_i2c_driver(tsc2007_driver); MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>"); MODULE_DESCRIPTION("TSC2007 TouchScreen Driver"); diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index 3a5ebf452e81..22cd96f58c99 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -17,6 +17,7 @@ * - Zytronic capacitive touchscreen * - NEXIO/iNexio * - Elo TouchSystems 2700 IntelliTouch + * - EasyTouch USB Dual/Multi touch controller from Data Modul * * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch> * Copyright (C) by Todd E. Johnson (mtouchusb.c) @@ -140,6 +141,7 @@ enum { DEVTYPE_TC45USB, DEVTYPE_NEXIO, DEVTYPE_ELO, + DEVTYPE_ETOUCH, }; #define USB_DEVICE_HID_CLASS(vend, prod) \ @@ -245,6 +247,10 @@ static const struct usb_device_id usbtouch_devices[] = { {USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO}, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + {USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH}, +#endif + {} }; @@ -326,6 +332,51 @@ static int egalax_get_pkt_len(unsigned char *buf, int len) } #endif +/***************************************************************************** + * EasyTouch part + */ + +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + +#ifndef MULTI_PACKET +#define MULTI_PACKET +#endif + +#define ETOUCH_PKT_TYPE_MASK 0xFE +#define ETOUCH_PKT_TYPE_REPT 0x80 +#define ETOUCH_PKT_TYPE_REPT2 0xB0 +#define ETOUCH_PKT_TYPE_DIAG 0x0A + +static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt) +{ + if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT && + (pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2) + return 0; + + dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F); + dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F); + dev->touch = pkt[0] & 0x01; + + return 1; +} + +static int etouch_get_pkt_len(unsigned char *buf, int len) +{ + switch (buf[0] & ETOUCH_PKT_TYPE_MASK) { + case ETOUCH_PKT_TYPE_REPT: + case ETOUCH_PKT_TYPE_REPT2: + return 5; + + case ETOUCH_PKT_TYPE_DIAG: + if (len < 2) + return -1; + + return buf[1] + 2; + } + + return 0; +} +#endif /***************************************************************************** * PanJit Part @@ -1175,6 +1226,18 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .exit = nexio_exit, }, #endif +#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH + [DEVTYPE_ETOUCH] = { + .min_xc = 0x0, + .max_xc = 0x07ff, + .min_yc = 0x0, + .max_yc = 0x07ff, + .rept_size = 16, + .process_pkt = usbtouch_process_multi, + .get_pkt_len = etouch_get_pkt_len, + .read_data = etouch_read_data, + }, +#endif }; |