8 files changed, 774 insertions, 1 deletions

diff --git a/drivers/input/joystick/turbografx.c b/drivers/input/joystick/turbografx.c
index d53b9e900234..27b6a3ce18ca 100644
--- a/drivers/input/joystick/turbografx.c
+++ b/drivers/input/joystick/turbografx.c
@@ -245,6 +245,7 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
 		goto err_free_tgfx;
         }
 
+	parport_put_port(pp);
 	return tgfx;
 
  err_free_dev:
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index b8c51b9781db..c76bd3183beb 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -179,6 +179,22 @@ config KEYBOARD_GPIO
 	  To compile this driver as a module, choose M here: the
 	  module will be called gpio_keys.
 
+config KEYBOARD_GPIO_POLLED
+	tristate "Polled GPIO buttons"
+	depends on GENERIC_GPIO
+	select INPUT_POLLDEV
+	help
+	  This driver implements support for buttons connected
+	  to GPIO pins that are not capable of generating interrupts.
+
+	  Say Y here if your device has buttons connected
+	  directly to such GPIO pins.  Your board-specific
+	  setup logic must also provide a platform device,
+	  with configuration data saying which GPIOs are used.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gpio_keys_polled.
+
 config KEYBOARD_TCA6416
 	tristate "TCA6416 Keypad Support"
 	depends on I2C
@@ -443,6 +459,16 @@ config KEYBOARD_OMAP4
 	  To compile this driver as a module, choose M here: the
 	  module will be called omap4-keypad.
 
+config KEYBOARD_TC3589X
+	tristate "TC3589X Keypad support"
+	depends on MFD_TC3589X
+	help
+	  Say Y here if you want to use the keypad controller on
+	  TC35892/3 I/O expander.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tc3589x-keypad.
+
 config KEYBOARD_TNETV107X
 	tristate "TI TNETV107X keypad support"
 	depends on ARCH_DAVINCI_TNETV107X
diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
index a34452e8ebe2..2aa6ce248b71 100644
--- a/drivers/input/keyboard/Makefile
+++ b/drivers/input/keyboard/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_KEYBOARD_BFIN)		+= bf54x-keys.o
 obj-$(CONFIG_KEYBOARD_DAVINCI)		+= davinci_keyscan.o
 obj-$(CONFIG_KEYBOARD_EP93XX)		+= ep93xx_keypad.o
 obj-$(CONFIG_KEYBOARD_GPIO)		+= gpio_keys.o
+obj-$(CONFIG_KEYBOARD_GPIO_POLLED)	+= gpio_keys_polled.o
 obj-$(CONFIG_KEYBOARD_TCA6416)		+= tca6416-keypad.o
 obj-$(CONFIG_KEYBOARD_HIL)		+= hil_kbd.o
 obj-$(CONFIG_KEYBOARD_HIL_OLD)		+= hilkbd.o
@@ -40,6 +41,7 @@ obj-$(CONFIG_KEYBOARD_SH_KEYSC)		+= sh_keysc.o
 obj-$(CONFIG_KEYBOARD_STMPE)		+= stmpe-keypad.o
 obj-$(CONFIG_KEYBOARD_STOWAWAY)		+= stowaway.o
 obj-$(CONFIG_KEYBOARD_SUNKBD)		+= sunkbd.o
+obj-$(CONFIG_KEYBOARD_TC3589X)		+= tc3589x-keypad.o
 obj-$(CONFIG_KEYBOARD_TNETV107X)	+= tnetv107x-keypad.o
 obj-$(CONFIG_KEYBOARD_TWL4030)		+= twl4030_keypad.o
 obj-$(CONFIG_KEYBOARD_XTKBD)		+= xtkbd.o
diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c
new file mode 100644
index 000000000000..4c17aff20657
--- /dev/null
+++ b/drivers/input/keyboard/gpio_keys_polled.c
@@ -0,0 +1,261 @@
+/*
+ *  Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *  Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ *  This file was based on: /drivers/input/misc/cobalt_btns.c
+ *	Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ *  also was based on: /drivers/input/keyboard/gpio_keys.c
+ *	Copyright 2005 Phil Blundell
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+
+#define DRV_NAME	"gpio-keys-polled"
+
+struct gpio_keys_button_data {
+	int last_state;
+	int count;
+	int threshold;
+	int can_sleep;
+};
+
+struct gpio_keys_polled_dev {
+	struct input_polled_dev *poll_dev;
+	struct device *dev;
+	struct gpio_keys_platform_data *pdata;
+	struct gpio_keys_button_data data[0];
+};
+
+static void gpio_keys_polled_check_state(struct input_dev *input,
+					 struct gpio_keys_button *button,
+					 struct gpio_keys_button_data *bdata)
+{
+	int state;
+
+	if (bdata->can_sleep)
+		state = !!gpio_get_value_cansleep(button->gpio);
+	else
+		state = !!gpio_get_value(button->gpio);
+
+	if (state != bdata->last_state) {
+		unsigned int type = button->type ?: EV_KEY;
+
+		input_event(input, type, button->code,
+			    !!(state ^ button->active_low));
+		input_sync(input);
+		bdata->count = 0;
+		bdata->last_state = state;
+	}
+}
+
+static void gpio_keys_polled_poll(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+	struct input_dev *input = dev->input;
+	int i;
+
+	for (i = 0; i < bdev->pdata->nbuttons; i++) {
+		struct gpio_keys_button_data *bdata = &bdev->data[i];
+
+		if (bdata->count < bdata->threshold)
+			bdata->count++;
+		else
+			gpio_keys_polled_check_state(input, &pdata->buttons[i],
+						     bdata);
+	}
+}
+
+static void gpio_keys_polled_open(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+	if (pdata->enable)
+		pdata->enable(bdev->dev);
+}
+
+static void gpio_keys_polled_close(struct input_polled_dev *dev)
+{
+	struct gpio_keys_polled_dev *bdev = dev->private;
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+	if (pdata->disable)
+		pdata->disable(bdev->dev);
+}
+
+static int __devinit gpio_keys_polled_probe(struct platform_device *pdev)
+{
+	struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct gpio_keys_polled_dev *bdev;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input;
+	int error;
+	int i;
+
+	if (!pdata || !pdata->poll_interval)
+		return -EINVAL;
+
+	bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
+		       pdata->nbuttons * sizeof(struct gpio_keys_button_data),
+		       GFP_KERNEL);
+	if (!bdev) {
+		dev_err(dev, "no memory for private data\n");
+		return -ENOMEM;
+	}
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		dev_err(dev, "no memory for polled device\n");
+		error = -ENOMEM;
+		goto err_free_bdev;
+	}
+
+	poll_dev->private = bdev;
+	poll_dev->poll = gpio_keys_polled_poll;
+	poll_dev->poll_interval = pdata->poll_interval;
+	poll_dev->open = gpio_keys_polled_open;
+	poll_dev->close = gpio_keys_polled_close;
+
+	input = poll_dev->input;
+
+	input->evbit[0] = BIT(EV_KEY);
+	input->name = pdev->name;
+	input->phys = DRV_NAME"/input0";
+	input->dev.parent = &pdev->dev;
+
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0001;
+	input->id.version = 0x0100;
+
+	for (i = 0; i < pdata->nbuttons; i++) {
+		struct gpio_keys_button *button = &pdata->buttons[i];
+		struct gpio_keys_button_data *bdata = &bdev->data[i];
+		unsigned int gpio = button->gpio;
+		unsigned int type = button->type ?: EV_KEY;
+
+		if (button->wakeup) {
+			dev_err(dev, DRV_NAME " does not support wakeup\n");
+			error = -EINVAL;
+			goto err_free_gpio;
+		}
+
+		error = gpio_request(gpio,
+				     button->desc ? button->desc : DRV_NAME);
+		if (error) {
+			dev_err(dev, "unable to claim gpio %u, err=%d\n",
+				gpio, error);
+			goto err_free_gpio;
+		}
+
+		error = gpio_direction_input(gpio);
+		if (error) {
+			dev_err(dev,
+				"unable to set direction on gpio %u, err=%d\n",
+				gpio, error);
+			goto err_free_gpio;
+		}
+
+		bdata->can_sleep = gpio_cansleep(gpio);
+		bdata->last_state = -1;
+		bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
+						pdata->poll_interval);
+
+		input_set_capability(input, type, button->code);
+	}
+
+	bdev->poll_dev = poll_dev;
+	bdev->dev = dev;
+	bdev->pdata = pdata;
+	platform_set_drvdata(pdev, bdev);
+
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		dev_err(dev, "unable to register polled device, err=%d\n",
+			error);
+		goto err_free_gpio;
+	}
+
+	/* report initial state of the buttons */
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_keys_polled_check_state(input, &pdata->buttons[i],
+					 &bdev->data[i]);
+
+	return 0;
+
+err_free_gpio:
+	while (--i >= 0)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(poll_dev);
+
+err_free_bdev:
+	kfree(bdev);
+
+	platform_set_drvdata(pdev, NULL);
+	return error;
+}
+
+static int __devexit gpio_keys_polled_remove(struct platform_device *pdev)
+{
+	struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
+	struct gpio_keys_platform_data *pdata = bdev->pdata;
+	int i;
+
+	input_unregister_polled_device(bdev->poll_dev);
+
+	for (i = 0; i < pdata->nbuttons; i++)
+		gpio_free(pdata->buttons[i].gpio);
+
+	input_free_polled_device(bdev->poll_dev);
+
+	kfree(bdev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver gpio_keys_polled_driver = {
+	.probe	= gpio_keys_polled_probe,
+	.remove	= __devexit_p(gpio_keys_polled_remove),
+	.driver	= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init gpio_keys_polled_init(void)
+{
+	return platform_driver_register(&gpio_keys_polled_driver);
+}
+
+static void __exit gpio_keys_polled_exit(void)
+{
+	platform_driver_unregister(&gpio_keys_polled_driver);
+}
+
+module_init(gpio_keys_polled_init);
+module_exit(gpio_keys_polled_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Polled GPIO Buttons driver");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c
new file mode 100644
index 000000000000..69dc0cb20a00
--- /dev/null
+++ b/drivers/input/keyboard/tc3589x-keypad.c
@@ -0,0 +1,472 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Jayeeta Banerjee <jayeeta.banerjee@stericsson.com>
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ *
+ * License Terms: GNU General Public License, version 2
+ *
+ * TC35893 MFD Keypad Controller driver
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/mfd/tc3589x.h>
+
+/* Maximum supported keypad matrix row/columns size */
+#define TC3589x_MAX_KPROW               8
+#define TC3589x_MAX_KPCOL               12
+
+/* keypad related Constants */
+#define TC3589x_MAX_DEBOUNCE_SETTLE     0xFF
+#define DEDICATED_KEY_VAL		0xFF
+
+/* Pull up/down masks */
+#define TC3589x_NO_PULL_MASK		0x0
+#define TC3589x_PULL_DOWN_MASK		0x1
+#define TC3589x_PULL_UP_MASK		0x2
+#define TC3589x_PULLUP_ALL_MASK		0xAA
+#define TC3589x_IO_PULL_VAL(index, mask)	((mask)<<((index)%4)*2))
+
+/* Bit masks for IOCFG register */
+#define IOCFG_BALLCFG		0x01
+#define IOCFG_IG		0x08
+
+#define KP_EVCODE_COL_MASK	0x0F
+#define KP_EVCODE_ROW_MASK	0x70
+#define KP_RELEASE_EVT_MASK	0x80
+
+#define KP_ROW_SHIFT		4
+
+#define KP_NO_VALID_KEY_MASK	0x7F
+
+/* bit masks for RESTCTRL register */
+#define TC3589x_KBDRST		0x2
+#define TC3589x_IRQRST		0x10
+#define TC3589x_RESET_ALL	0x1B
+
+/* KBDMFS register bit mask */
+#define TC3589x_KBDMFS_EN	0x1
+
+/* CLKEN register bitmask */
+#define KPD_CLK_EN		0x1
+
+/* RSTINTCLR register bit mask */
+#define IRQ_CLEAR		0x1
+
+/* bit masks for keyboard interrupts*/
+#define TC3589x_EVT_LOSS_INT	0x8
+#define TC3589x_EVT_INT		0x4
+#define TC3589x_KBD_LOSS_INT	0x2
+#define TC3589x_KBD_INT		0x1
+
+/* bit masks for keyboard interrupt clear*/
+#define TC3589x_EVT_INT_CLR	0x2
+#define TC3589x_KBD_INT_CLR	0x1
+
+#define TC3589x_KBD_KEYMAP_SIZE     64
+
+/**
+ * struct tc_keypad - data structure used by keypad driver
+ * @input:      pointer to input device object
+ * @board:      keypad platform device
+ * @krow:	number of rows
+ * @kcol:	number of coloumns
+ * @keymap:     matrix scan code table for keycodes
+ */
+struct tc_keypad {
+	struct tc3589x *tc3589x;
+	struct input_dev *input;
+	const struct tc3589x_keypad_platform_data *board;
+	unsigned int krow;
+	unsigned int kcol;
+	unsigned short keymap[TC3589x_KBD_KEYMAP_SIZE];
+	bool keypad_stopped;
+};
+
+static int __devinit tc3589x_keypad_init_key_hardware(struct tc_keypad *keypad)
+{
+	int ret;
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	u8 settle_time = keypad->board->settle_time;
+	u8 dbounce_period = keypad->board->debounce_period;
+	u8 rows = keypad->board->krow & 0xf;	/* mask out the nibble */
+	u8 column = keypad->board->kcol & 0xf;	/* mask out the nibble */
+
+	/* validate platform configurations */
+	if (keypad->board->kcol > TC3589x_MAX_KPCOL ||
+	    keypad->board->krow > TC3589x_MAX_KPROW ||
+	    keypad->board->debounce_period > TC3589x_MAX_DEBOUNCE_SETTLE ||
+	    keypad->board->settle_time > TC3589x_MAX_DEBOUNCE_SETTLE)
+		return -EINVAL;
+
+	/* configure KBDSIZE 4 LSbits for cols and 4 MSbits for rows */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSIZE,
+			(rows << KP_ROW_SHIFT) | column);
+	if (ret < 0)
+		return ret;
+
+	/* configure dedicated key config, no dedicated key selected */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_LSB, DEDICATED_KEY_VAL);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBCFG_MSB, DEDICATED_KEY_VAL);
+	if (ret < 0)
+		return ret;
+
+	/* Configure settle time */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDSETTLE_REG, settle_time);
+	if (ret < 0)
+		return ret;
+
+	/* Configure debounce time */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_KBDBOUNCE, dbounce_period);
+	if (ret < 0)
+		return ret;
+
+	/* Start of initialise keypad GPIOs */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_IOCFG, 0x0, IOCFG_IG);
+	if (ret < 0)
+		return ret;
+
+	/* Configure pull-up resistors for all row GPIOs */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_LSB,
+					TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG0_MSB,
+					TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	/* Configure pull-up resistors for all column GPIOs */
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_LSB,
+			TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG1_MSB,
+			TC3589x_PULLUP_ALL_MASK);
+	if (ret < 0)
+		return ret;
+
+	ret = tc3589x_reg_write(tc3589x, TC3589x_IOPULLCFG2_LSB,
+			TC3589x_PULLUP_ALL_MASK);
+
+	return ret;
+}
+
+#define TC35893_DATA_REGS		4
+#define TC35893_KEYCODE_FIFO_EMPTY	0x7f
+#define TC35893_KEYCODE_FIFO_CLEAR	0xff
+#define TC35893_KEYPAD_ROW_SHIFT	0x3
+
+static irqreturn_t tc3589x_keypad_irq(int irq, void *dev)
+{
+	struct tc_keypad *keypad = dev;
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	u8 i, row_index, col_index, kbd_code, up;
+	u8 code;
+
+	for (i = 0; i < TC35893_DATA_REGS * 2; i++) {
+		kbd_code = tc3589x_reg_read(tc3589x, TC3589x_EVTCODE_FIFO);
+
+		/* loop till fifo is empty and no more keys are pressed */
+		if (kbd_code == TC35893_KEYCODE_FIFO_EMPTY ||
+				kbd_code == TC35893_KEYCODE_FIFO_CLEAR)
+			continue;
+
+		/* valid key is found */
+		col_index = kbd_code & KP_EVCODE_COL_MASK;
+		row_index = (kbd_code & KP_EVCODE_ROW_MASK) >> KP_ROW_SHIFT;
+		code = MATRIX_SCAN_CODE(row_index, col_index,
+						TC35893_KEYPAD_ROW_SHIFT);
+		up = kbd_code & KP_RELEASE_EVT_MASK;
+
+		input_event(keypad->input, EV_MSC, MSC_SCAN, code);
+		input_report_key(keypad->input, keypad->keymap[code], !up);
+		input_sync(keypad->input);
+	}
+
+	/* clear IRQ */
+	tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+			0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+	/* enable IRQ */
+	tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+			0x0, TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+
+	return IRQ_HANDLED;
+}
+
+static int tc3589x_keypad_enable(struct tc_keypad *keypad)
+{
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	int ret;
+
+	/* pull the keypad module out of reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* configure KBDMFS */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMFS, 0x0, TC3589x_KBDMFS_EN);
+	if (ret < 0)
+		return ret;
+
+	/* enable the keypad clock */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x0, KPD_CLK_EN);
+	if (ret < 0)
+		return ret;
+
+	/* clear pending IRQs */
+	ret =  tc3589x_set_bits(tc3589x, TC3589x_RSTINTCLR, 0x0, 0x1);
+	if (ret < 0)
+		return ret;
+
+	/* enable the IRQs */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK, 0x0,
+					TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT);
+	if (ret < 0)
+		return ret;
+
+	keypad->keypad_stopped = false;
+
+	return ret;
+}
+
+static int tc3589x_keypad_disable(struct tc_keypad *keypad)
+{
+	struct tc3589x *tc3589x = keypad->tc3589x;
+	int ret;
+
+	/* clear IRQ */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDIC,
+			0x0, TC3589x_EVT_INT_CLR | TC3589x_KBD_INT_CLR);
+	if (ret < 0)
+		return ret;
+
+	/* disable all interrupts */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_KBDMSK,
+			~(TC3589x_EVT_LOSS_INT | TC3589x_EVT_INT), 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* disable the keypad module */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_CLKEN, 0x1, 0x0);
+	if (ret < 0)
+		return ret;
+
+	/* put the keypad module into reset */
+	ret = tc3589x_set_bits(tc3589x, TC3589x_RSTCTRL, TC3589x_KBDRST, 0x1);
+
+	keypad->keypad_stopped = true;
+
+	return ret;
+}
+
+static int tc3589x_keypad_open(struct input_dev *input)
+{
+	int error;
+	struct tc_keypad *keypad = input_get_drvdata(input);
+
+	/* enable the keypad module */
+	error = tc3589x_keypad_enable(keypad);
+	if (error < 0) {
+		dev_err(&input->dev, "failed to enable keypad module\n");
+		return error;
+	}
+
+	error = tc3589x_keypad_init_key_hardware(keypad);
+	if (error < 0) {
+		dev_err(&input->dev, "failed to configure keypad module\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static void tc3589x_keypad_close(struct input_dev *input)
+{
+	struct tc_keypad *keypad = input_get_drvdata(input);
+
+	/* disable the keypad module */
+	tc3589x_keypad_disable(keypad);
+}
+
+static int __devinit tc3589x_keypad_probe(struct platform_device *pdev)
+{
+	struct tc3589x *tc3589x = dev_get_drvdata(pdev->dev.parent);
+	struct tc_keypad *keypad;
+	struct input_dev *input;
+	const struct tc3589x_keypad_platform_data *plat;
+	int error, irq;
+
+	plat = tc3589x->pdata->keypad;
+	if (!plat) {
+		dev_err(&pdev->dev, "invalid keypad platform data\n");
+		return -EINVAL;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	keypad = kzalloc(sizeof(struct tc_keypad), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!keypad || !input) {
+		dev_err(&pdev->dev, "failed to allocate keypad memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	keypad->board = plat;
+	keypad->input = input;
+	keypad->tc3589x = tc3589x;
+
+	input->id.bustype = BUS_I2C;
+	input->name = pdev->name;
+	input->dev.parent = &pdev->dev;
+
+	input->keycode = keypad->keymap;
+	input->keycodesize = sizeof(keypad->keymap[0]);
+	input->keycodemax = ARRAY_SIZE(keypad->keymap);
+
+	input->open = tc3589x_keypad_open;
+	input->close = tc3589x_keypad_close;
+
+	input_set_drvdata(input, keypad);
+
+	input_set_capability(input, EV_MSC, MSC_SCAN);
+
+	__set_bit(EV_KEY, input->evbit);
+	if (!plat->no_autorepeat)
+		__set_bit(EV_REP, input->evbit);
+
+	matrix_keypad_build_keymap(plat->keymap_data, 0x3,
+			input->keycode, input->keybit);
+
+	error = request_threaded_irq(irq, NULL,
+			tc3589x_keypad_irq, plat->irqtype,
+			"tc3589x-keypad", keypad);
+	if (error < 0) {
+		dev_err(&pdev->dev,
+				"Could not allocate irq %d,error %d\n",
+				irq, error);
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "Could not register input device\n");
+		goto err_free_irq;
+	}
+
+	/* let platform decide if keypad is a wakeup source or not */
+	device_init_wakeup(&pdev->dev, plat->enable_wakeup);
+	device_set_wakeup_capable(&pdev->dev, plat->enable_wakeup);
+
+	platform_set_drvdata(pdev, keypad);
+
+	return 0;
+
+err_free_irq:
+	free_irq(irq, keypad);
+err_free_mem:
+	input_free_device(input);
+	kfree(keypad);
+	return error;
+}
+
+static int __devexit tc3589x_keypad_remove(struct platform_device *pdev)
+{
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (!keypad->keypad_stopped)
+		tc3589x_keypad_disable(keypad);
+
+	free_irq(irq, keypad);
+
+	input_unregister_device(keypad->input);
+
+	kfree(keypad);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int tc3589x_keypad_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	/* keypad is already off; we do nothing */
+	if (keypad->keypad_stopped)
+		return 0;
+
+	/* if device is not a wakeup source, disable it for powersave */
+	if (!device_may_wakeup(&pdev->dev))
+		tc3589x_keypad_disable(keypad);
+	else
+		enable_irq_wake(irq);
+
+	return 0;
+}
+
+static int tc3589x_keypad_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct tc_keypad *keypad = platform_get_drvdata(pdev);
+	int irq = platform_get_irq(pdev, 0);
+
+	if (!keypad->keypad_stopped)
+		return 0;
+
+	/* enable the device to resume normal operations */
+	if (!device_may_wakeup(&pdev->dev))
+		tc3589x_keypad_enable(keypad);
+	else
+		disable_irq_wake(irq);
+
+	return 0;
+}
+
+static const SIMPLE_DEV_PM_OPS(tc3589x_keypad_dev_pm_ops,
+			       tc3589x_keypad_suspend, tc3589x_keypad_resume);
+#endif
+
+static struct platform_driver tc3589x_keypad_driver = {
+	.driver.name  = "tc3589x-keypad",
+	.driver.owner = THIS_MODULE,
+#ifdef CONFIG_PM
+	.driver.pm = &tc3589x_keypad_dev_pm_ops,
+#endif
+	.probe = tc3589x_keypad_probe,
+	.remove = __devexit_p(tc3589x_keypad_remove),
+};
+
+static int __init tc3589x_keypad_init(void)
+{
+	return platform_driver_register(&tc3589x_keypad_driver);
+}
+module_init(tc3589x_keypad_init);
+
+static void __exit tc3589x_keypad_exit(void)
+{
+	return platform_driver_unregister(&tc3589x_keypad_driver);
+}
+module_exit(tc3589x_keypad_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jayeeta Banerjee/Sundar Iyer");
+MODULE_DESCRIPTION("TC35893 Keypad Driver");
+MODULE_ALIAS("platform:tc3589x-keypad")
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index 613a3652f98f..0aefaa885871 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -51,7 +51,8 @@
 #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
 #define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
-#define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100100)
+#define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
+#define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
 #define SYN_CAP_MAX_DIMENSIONS(ex0c)	((ex0c) & 0x020000)
 
 /* synaptics modes query bits */
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index b3252ef1e279..4852b440960a 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -1436,6 +1436,12 @@ static struct wacom_features wacom_features_0xD2 =
 	{ "Wacom Bamboo Craft",   WACOM_PKGLEN_BBFUN,     14720,  9200, 1023, 63, BAMBOO_PT };
 static struct wacom_features wacom_features_0xD3 =
 	{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN,     21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD8 =
+	{ "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN,   21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDA =
+	{ "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN,  14720,  9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDB =
+	{ "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN,  21648, 13530, 1023, 63, BAMBOO_PT };
 
 #define USB_DEVICE_WACOM(prod)					\
 	USB_DEVICE(USB_VENDOR_ID_WACOM, prod),			\
@@ -1504,6 +1510,9 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xD1) },
 	{ USB_DEVICE_WACOM(0xD2) },
 	{ USB_DEVICE_WACOM(0xD3) },
+	{ USB_DEVICE_WACOM(0xD8) },
+	{ USB_DEVICE_WACOM(0xDA) },
+	{ USB_DEVICE_WACOM(0xDB) },
 	{ USB_DEVICE_WACOM(0xF0) },
 	{ USB_DEVICE_WACOM(0xCC) },
 	{ USB_DEVICE_WACOM(0x90) },
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
index f45f80f6d336..73fd6642b681 100644
--- a/drivers/input/touchscreen/usbtouchscreen.c
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -178,6 +178,7 @@ static const struct usb_device_id usbtouch_devices[] = {
 
 #ifdef CONFIG_TOUCHSCREEN_USB_ITM
 	{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+	{USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
 #endif
 
 #ifdef CONFIG_TOUCHSCREEN_USB_ETURBO