diff options
Diffstat (limited to 'drivers/input')
-rw-r--r-- | drivers/input/misc/Kconfig | 16 | ||||
-rw-r--r-- | drivers/input/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/input/misc/alps_gpio_scrollwheel.c | 428 |
3 files changed, 445 insertions, 0 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 263471a905f7..37f843e95af0 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -454,4 +454,20 @@ config INPUT_ADXL34X_SPI To compile this driver as a module, choose M here: the module will be called adxl34x-spi. +config INPUT_ALPS_GPIO_SCROLLWHEEL + tristate "Alps GPIO Scrollwheel" + depends on GENERIC_GPIO + help + This driver implements support for Alps SRBE + ScrollWheel connected to GPIO pins of various + CPUs (and some other chips). + + Say Y here if your device has ScrollWheel connected + directly to such GPIO pins. Your board-specific + setup logic must also provide a platform device, + with configuration data saying which GPIOs are used. + + To compile this driver as a module, choose M here: the + module will be called alps_gpio_scrollwheel. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 7ac4ca759999..bc875ba892da 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_INPUT_AD714X_SPI) += ad714x-spi.o obj-$(CONFIG_INPUT_ADXL34X) += adxl34x.o obj-$(CONFIG_INPUT_ADXL34X_I2C) += adxl34x-i2c.o obj-$(CONFIG_INPUT_ADXL34X_SPI) += adxl34x-spi.o +obj-$(CONFIG_INPUT_ALPS_GPIO_SCROLLWHEEL) += alps_gpio_scrollwheel.o obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o diff --git a/drivers/input/misc/alps_gpio_scrollwheel.c b/drivers/input/misc/alps_gpio_scrollwheel.c new file mode 100644 index 000000000000..4a789267c475 --- /dev/null +++ b/drivers/input/misc/alps_gpio_scrollwheel.c @@ -0,0 +1,428 @@ +/* + * kernel/drivers/input/misc/alps_gpio_scrollwheel.c + * + * Copyright (c) 2010, NVIDIA Corporation. + * + * Driver for ScrollWheel on GPIO lines capable of generating interrupts. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + */ + + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/sched.h> +#include <linux/pm.h> +#include <linux/slab.h> +#include <linux/sysctl.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <linux/input.h> +#include <linux/gpio_scrollwheel.h> +#include <linux/workqueue.h> +#include <linux/gpio.h> + +struct scrollwheel_button_data { + struct gpio_scrollwheel_button *button; + struct input_dev *input; + struct timer_list timer; + struct work_struct work; + int timer_debounce; /* in msecs */ + int rotgpio; + bool disabled; +}; + +struct gpio_scrollwheel_drvdata { + struct input_dev *input; + struct mutex disable_lock; + unsigned int n_buttons; + int (*enable)(struct device *dev); + void (*disable)(struct device *dev); + struct scrollwheel_button_data data[0]; +}; + +static void scrollwheel_report_key(struct scrollwheel_button_data *bdata) +{ + struct gpio_scrollwheel_button *button = bdata->button; + struct input_dev *input = bdata->input; + int state = (gpio_get_value(button->gpio) ? 1 : 0) ^ \ + button->active_low; + int state2 = 0; + + switch (button->pinaction) { + case GPIO_SCROLLWHEEL_PIN_PRESS: + input_report_key(input, KEY_ENTER, 1); + input_report_key(input, KEY_ENTER, 0); + input_sync(input); + break; + + case GPIO_SCROLLWHEEL_PIN_ROT1: + case GPIO_SCROLLWHEEL_PIN_ROT2: + state2 = (gpio_get_value(bdata->rotgpio) ? 1 : 0) \ + ^ button->active_low; + if (state != state2) { + input_report_key(input, KEY_DOWN, 1); + input_report_key(input, KEY_DOWN, 0); + } else { + input_report_key(input, KEY_UP, 1); + input_report_key(input, KEY_UP, 0); + } + input_sync(input); + break; + + default: + pr_err("%s:Line=%d, Invalid Pinaction\n", __func__, __LINE__); + } +} + +static void scrollwheel_work_func(struct work_struct *work) +{ + struct scrollwheel_button_data *bdata = + container_of(work, struct scrollwheel_button_data, work); + + scrollwheel_report_key(bdata); +} + +static void scrollwheel_timer(unsigned long _data) +{ + struct scrollwheel_button_data *data = \ + (struct scrollwheel_button_data *)_data; + + schedule_work(&data->work); +} + +static irqreturn_t scrollwheel_isr(int irq, void *dev_id) +{ + struct scrollwheel_button_data *bdata = dev_id; + struct gpio_scrollwheel_button *button = bdata->button; + + BUG_ON(irq != gpio_to_irq(button->gpio)); + + if (bdata->timer_debounce) + mod_timer(&bdata->timer, + jiffies + msecs_to_jiffies(bdata->timer_debounce)); + else + schedule_work(&bdata->work); + + return IRQ_HANDLED; +} + +static int __devinit gpio_scrollwheel_setup_key(struct platform_device *pdev, + struct scrollwheel_button_data *bdata, + struct gpio_scrollwheel_button *button) +{ + char *desc = button->desc ? button->desc : "gpio_scrollwheel"; + struct device *dev = &pdev->dev; + unsigned long irqflags; + int irq, error; + + setup_timer(&bdata->timer, scrollwheel_timer, (unsigned long)bdata); + INIT_WORK(&bdata->work, scrollwheel_work_func); + + error = gpio_request(button->gpio, desc); + if (error < 0) { + dev_err(dev, "failed to request GPIO %d, error %d\n", + button->gpio, error); + return error; + } + + error = gpio_direction_input(button->gpio); + if (error < 0) { + dev_err(dev, "failed to configure" + " direction for GPIO %d, error %d\n", + button->gpio, error); + goto fail; + } + + if (button->debounce_interval) { + error = gpio_set_debounce(button->gpio, + button->debounce_interval * 1000); + /* use timer if gpiolib doesn't provide debounce */ + if (error < 0) + bdata->timer_debounce = button->debounce_interval; + } + + irq = gpio_to_irq(button->gpio); + if (irq < 0) { + error = irq; + dev_err(dev, "Unable to get irq no for GPIO %d, error %d\n", + button->gpio, error); + goto fail; + } + + irqflags = IRQF_TRIGGER_FALLING; + + error = request_irq(irq, scrollwheel_isr, irqflags, desc, bdata); + if (error) { + dev_err(dev, "Unable to claim irq %d; error %d\n", + irq, error); + goto fail; + } + + return 0; + +fail: + return error; +} + +static int gpio_scrollwheel_open(struct input_dev *input) +{ + struct gpio_scrollwheel_drvdata *ddata = input_get_drvdata(input); + + return ddata->enable ? ddata->enable(input->dev.parent) : 0; +} + +static void gpio_scrollwheel_close(struct input_dev *input) +{ + struct gpio_scrollwheel_drvdata *ddata = input_get_drvdata(input); + + if (ddata->disable) + ddata->disable(input->dev.parent); +} + +static int __devinit gpio_scrollwheel_probe(struct platform_device *pdev) +{ + struct gpio_scrollwheel_platform_data *pdata = pdev->dev.platform_data; + struct gpio_scrollwheel_drvdata *ddata; + struct device *dev = &pdev->dev; + struct input_dev *input; + int i, error; + + ddata = kzalloc(sizeof(struct gpio_scrollwheel_drvdata) + + pdata->nbuttons * sizeof(struct scrollwheel_button_data), + GFP_KERNEL); + if (ddata == NULL) { + dev_err(dev, "failed to allocate memory\n"); + error = -ENOMEM; + return error; + } + + input = input_allocate_device(); + if (input == NULL) { + dev_err(dev, "failed to allocate input device\n"); + error = -ENOMEM; + kfree(ddata); + return error; + } + + ddata->input = input; + ddata->n_buttons = pdata->nbuttons; + ddata->enable = pdata->enable; + ddata->disable = pdata->disable; + mutex_init(&ddata->disable_lock); + + platform_set_drvdata(pdev, ddata); + input_set_drvdata(input, ddata); + + input->name = pdev->name; + input->phys = "gpio-scrollwheel/input0"; + input->dev.parent = &pdev->dev; + input->open = gpio_scrollwheel_open; + input->close = gpio_scrollwheel_close; + + input->id.bustype = BUS_HOST; + input->id.vendor = 0x0001; + input->id.product = 0x0001; + input->id.version = 0x0100; + + /* Enable auto repeat feature of Linux input subsystem */ + if (pdata->rep) + __set_bit(EV_REP, input->evbit); + + for (i = 0; i < pdata->nbuttons; i++) { + struct gpio_scrollwheel_button *button = &pdata->buttons[i]; + struct scrollwheel_button_data *bdata = &ddata->data[i]; + + bdata->input = input; + bdata->button = button; + + if (button->pinaction == GPIO_SCROLLWHEEL_PIN_PRESS || + button->pinaction == GPIO_SCROLLWHEEL_PIN_ROT1) { + error = gpio_scrollwheel_setup_key(pdev, bdata, button); + if (error) + goto fail; + } else { + if (button->pinaction == GPIO_SCROLLWHEEL_PIN_ONOFF) { + gpio_request(button->gpio, button->desc); + gpio_direction_output(button->gpio, 0); + } + + if (button->pinaction == GPIO_SCROLLWHEEL_PIN_ROT2) { + gpio_request(button->gpio, button->desc); + gpio_direction_input(button->gpio); + /* Save rot2 gpio number in rot1 context */ + ddata->data[2].rotgpio = button->gpio; + } + } + } + + /* set input capability */ + __set_bit(EV_KEY, input->evbit); + __set_bit(KEY_ENTER, input->keybit); + __set_bit(KEY_UP, input->keybit); + __set_bit(KEY_DOWN, input->keybit); + + error = input_register_device(input); + if (error) { + dev_err(dev, "Unable to register input device, error: %d\n", + error); + goto fail; + } + + input_sync(input); + + return 0; + +fail: + while (--i >= 0) { + if (pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_PRESS || + pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_ROT1) { + free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); + if (ddata->data[i].timer_debounce) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); + } + gpio_free(pdata->buttons[i].gpio); + } + + platform_set_drvdata(pdev, NULL); + input_free_device(input); + kfree(ddata); + return error; +} + +static int __devexit gpio_scrollwheel_remove(struct platform_device *pdev) +{ + struct gpio_scrollwheel_platform_data *pdata = pdev->dev.platform_data; + struct gpio_scrollwheel_drvdata *ddata = platform_get_drvdata(pdev); + struct input_dev *input = ddata->input; + int i; + + for (i = 0; i < pdata->nbuttons; i++) { + if (pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_PRESS || + pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_ROT1) { + int irq = gpio_to_irq(pdata->buttons[i].gpio); + free_irq(irq, &ddata->data[i]); + if (ddata->data[i].timer_debounce) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); + } + gpio_free(pdata->buttons[i].gpio); + } + + input_unregister_device(input); + + return 0; +} + + +#ifdef CONFIG_PM +static int gpio_scrollwheel_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_scrollwheel_platform_data *pdata = pdev->dev.platform_data; + struct gpio_scrollwheel_drvdata *ddata = platform_get_drvdata(pdev); + int i, irq; + + for (i = 0; i < pdata->nbuttons; i++) { + if (pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_PRESS || + pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_ROT1) { + irq = gpio_to_irq(pdata->buttons[i].gpio); + disable_irq(irq); + if (ddata->data[i].timer_debounce) + del_timer_sync(&ddata->data[i].timer); + cancel_work_sync(&ddata->data[i].work); + } else { + if (pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_ONOFF) + gpio_direction_output(pdata->buttons[i].gpio, 1); + else { + irq = gpio_to_irq(pdata->buttons[i].gpio); + disable_irq(irq); + } + } + } + return 0; +} + +static int gpio_scrollwheel_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct gpio_scrollwheel_platform_data *pdata = pdev->dev.platform_data; + struct gpio_scrollwheel_drvdata *ddata = platform_get_drvdata(pdev); + int i, irq; + + for (i = 0; i < pdata->nbuttons; i++) { + if (pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_PRESS || + pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_ROT1) { + irq = gpio_to_irq(pdata->buttons[i].gpio); + enable_irq(irq); + if (ddata->data[i].timer_debounce) + setup_timer(&ddata->data[i].timer,\ + scrollwheel_timer, (unsigned long)&ddata->data[i]); + + INIT_WORK(&ddata->data[i].work, scrollwheel_work_func); + } else { + if (pdata->buttons[i].pinaction == GPIO_SCROLLWHEEL_PIN_ONOFF) + gpio_direction_output(pdata->buttons[i].gpio, 0); + else { + irq = gpio_to_irq(pdata->buttons[i].gpio); + enable_irq(irq); + } + } + } + + return 0; +} + +static const struct dev_pm_ops gpio_scrollwheel_pm_ops = { + .suspend = gpio_scrollwheel_suspend, + .resume = gpio_scrollwheel_resume, +}; +#endif + +static struct platform_driver gpio_scrollwheel_device_driver = { + .probe = gpio_scrollwheel_probe, + .remove = __devexit_p(gpio_scrollwheel_remove), + .driver = { + .name = "alps-gpio-scrollwheel", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &gpio_scrollwheel_pm_ops, +#endif + } +}; + +static int __init gpio_scrollwheel_init(void) +{ + return platform_driver_register(&gpio_scrollwheel_device_driver); +} + +static void __exit gpio_scrollwheel_exit(void) +{ + platform_driver_unregister(&gpio_scrollwheel_device_driver); +} + +module_init(gpio_scrollwheel_init); +module_exit(gpio_scrollwheel_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("NVIDIA Corporation"); +MODULE_DESCRIPTION("Alps SRBE ScrollWheel driver"); + +MODULE_ALIAS("platform:alps-gpio-scrollwheel"); |