diff options
Diffstat (limited to 'drivers/md')
| -rw-r--r-- | drivers/md/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/md/Makefile | 4 | ||||
| -rw-r--r-- | drivers/md/md.c | 2 | ||||
| -rw-r--r-- | drivers/md/raid5.c | 2727 | ||||
| -rw-r--r-- | drivers/md/xor.c | 154 |
5 files changed, 1685 insertions, 1204 deletions
diff --git a/drivers/md/Kconfig b/drivers/md/Kconfig index 466909f38d98..64bf3a81db93 100644 --- a/drivers/md/Kconfig +++ b/drivers/md/Kconfig @@ -109,6 +109,8 @@ config MD_RAID10 config MD_RAID456 tristate "RAID-4/RAID-5/RAID-6 mode" depends on BLK_DEV_MD + select ASYNC_MEMCPY + select ASYNC_XOR ---help--- A RAID-5 set of N drives with a capacity of C MB per drive provides the capacity of C * (N - 1) MB, and protects against a failure diff --git a/drivers/md/Makefile b/drivers/md/Makefile index 2c45d7683ae9..c49366cdc05d 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -18,7 +18,7 @@ raid456-objs := raid5.o raid6algos.o raid6recov.o raid6tables.o \ hostprogs-y := mktables # Note: link order is important. All raid personalities -# and xor.o must come before md.o, as they each initialise +# and must come before md.o, as they each initialise # themselves, and md.o may use the personalities when it # auto-initialised. @@ -26,7 +26,7 @@ obj-$(CONFIG_MD_LINEAR) += linear.o obj-$(CONFIG_MD_RAID0) += raid0.o obj-$(CONFIG_MD_RAID1) += raid1.o obj-$(CONFIG_MD_RAID10) += raid10.o -obj-$(CONFIG_MD_RAID456) += raid456.o xor.o +obj-$(CONFIG_MD_RAID456) += raid456.o obj-$(CONFIG_MD_MULTIPATH) += multipath.o obj-$(CONFIG_MD_FAULTY) += faulty.o obj-$(CONFIG_BLK_DEV_MD) += md-mod.o diff --git a/drivers/md/md.c b/drivers/md/md.c index 1c54f3c1cca7..33beaa7da085 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5814,7 +5814,7 @@ static __exit void md_exit(void) } } -module_init(md_init) +subsys_initcall(md_init); module_exit(md_exit) static int get_ro(char *buffer, struct kernel_param *kp) diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 061375ee6592..0b66afef2d82 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -52,6 +52,7 @@ #include "raid6.h" #include <linux/raid/bitmap.h> +#include <linux/async_tx.h> /* * Stripe cache @@ -80,7 +81,6 @@ /* * The following can be used to debug the driver */ -#define RAID5_DEBUG 0 #define RAID5_PARANOIA 1 #if RAID5_PARANOIA && defined(CONFIG_SMP) # define CHECK_DEVLOCK() assert_spin_locked(&conf->device_lock) @@ -88,8 +88,7 @@ # define CHECK_DEVLOCK() #endif -#define PRINTK(x...) ((void)(RAID5_DEBUG && printk(x))) -#if RAID5_DEBUG +#ifdef DEBUG #define inline #define __inline__ #endif @@ -104,6 +103,23 @@ static inline int raid6_next_disk(int disk, int raid_disks) disk++; return (disk < raid_disks) ? disk : 0; } + +static void return_io(struct bio *return_bi) +{ + struct bio *bi = return_bi; + while (bi) { + int bytes = bi->bi_size; + + return_bi = bi->bi_next; + bi->bi_next = NULL; + bi->bi_size = 0; + bi->bi_end_io(bi, bytes, + test_bit(BIO_UPTODATE, &bi->bi_flags) + ? 0 : -EIO); + bi = return_bi; + } +} + static void print_raid5_conf (raid5_conf_t *conf); static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh) @@ -125,6 +141,7 @@ static void __release_stripe(raid5_conf_t *conf, struct stripe_head *sh) } md_wakeup_thread(conf->mddev->thread); } else { + BUG_ON(sh->ops.pending); if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { atomic_dec(&conf->preread_active_stripes); if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) @@ -152,7 +169,8 @@ static void release_stripe(struct stripe_head *sh) static inline void remove_hash(struct stripe_head *sh) { - PRINTK("remove_hash(), stripe %llu\n", (unsigned long long)sh->sector); + pr_debug("remove_hash(), stripe %llu\n", + (unsigned long long)sh->sector); hlist_del_init(&sh->hash); } @@ -161,7 +179,8 @@ static inline void insert_hash(raid5_conf_t *conf, struct stripe_head *sh) { struct hlist_head *hp = stripe_hash(conf, sh->sector); - PRINTK("insert_hash(), stripe %llu\n", (unsigned long long)sh->sector); + pr_debug("insert_hash(), stripe %llu\n", + (unsigned long long)sh->sector); CHECK_DEVLOCK(); hlist_add_head(&sh->hash, hp); @@ -224,9 +243,10 @@ static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int BUG_ON(atomic_read(&sh->count) != 0); BUG_ON(test_bit(STRIPE_HANDLE, &sh->state)); - + BUG_ON(sh->ops.pending || sh->ops.ack || sh->ops.complete); + CHECK_DEVLOCK(); - PRINTK("init_stripe called, stripe %llu\n", + pr_debug("init_stripe called, stripe %llu\n", (unsigned long long)sh->sector); remove_hash(sh); @@ -240,11 +260,11 @@ static void init_stripe(struct stripe_head *sh, sector_t sector, int pd_idx, int for (i = sh->disks; i--; ) { struct r5dev *dev = &sh->dev[i]; - if (dev->toread || dev->towrite || dev->written || + if (dev->toread || dev->read || dev->towrite || dev->written || test_bit(R5_LOCKED, &dev->flags)) { - printk("sector=%llx i=%d %p %p %p %d\n", + printk(KERN_ERR "sector=%llx i=%d %p %p %p %p %d\n", (unsigned long long)sh->sector, i, dev->toread, - dev->towrite, dev->written, + dev->read, dev->towrite, dev->written, test_bit(R5_LOCKED, &dev->flags)); BUG(); } @@ -260,11 +280,11 @@ static struct stripe_head *__find_stripe(raid5_conf_t *conf, sector_t sector, in struct hlist_node *hn; CHECK_DEVLOCK(); - PRINTK("__find_stripe, sector %llu\n", (unsigned long long)sector); + pr_debug("__find_stripe, sector %llu\n", (unsigned long long)sector); hlist_for_each_entry(sh, hn, stripe_hash(conf, sector), hash) if (sh->sector == sector && sh->disks == disks) return sh; - PRINTK("__stripe %llu not in cache\n", (unsigned long long)sector); + pr_debug("__stripe %llu not in cache\n", (unsigned long long)sector); return NULL; } @@ -276,7 +296,7 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector { struct stripe_head *sh; - PRINTK("get_stripe, sector %llu\n", (unsigned long long)sector); + pr_debug("get_stripe, sector %llu\n", (unsigned long long)sector); spin_lock_irq(&conf->device_lock); @@ -324,6 +344,579 @@ static struct stripe_head *get_active_stripe(raid5_conf_t *conf, sector_t sector return sh; } +/* test_and_ack_op() ensures that we only dequeue an operation once */ +#define test_and_ack_op(op, pend) \ +do { \ + if (test_bit(op, &sh->ops.pending) && \ + !test_bit(op, &sh->ops.complete)) { \ + if (test_and_set_bit(op, &sh->ops.ack)) \ + clear_bit(op, &pend); \ + else \ + ack++; \ + } else \ + clear_bit(op, &pend); \ +} while (0) + +/* find new work to run, do not resubmit work that is already + * in flight + */ +static unsigned long get_stripe_work(struct stripe_head *sh) +{ + unsigned long pending; + int ack = 0; + + pending = sh->ops.pending; + + test_and_ack_op(STRIPE_OP_BIOFILL, pending); + test_and_ack_op(STRIPE_OP_COMPUTE_BLK, pending); + test_and_ack_op(STRIPE_OP_PREXOR, pending); + test_and_ack_op(STRIPE_OP_BIODRAIN, pending); + test_and_ack_op(STRIPE_OP_POSTXOR, pending); + test_and_ack_op(STRIPE_OP_CHECK, pending); + if (test_and_clear_bit(STRIPE_OP_IO, &sh->ops.pending)) + ack++; + + sh->ops.count -= ack; + BUG_ON(sh->ops.count < 0); + + return pending; +} + +static int +raid5_end_read_request(struct bio *bi, unsigned int bytes_done, int error); +static int +raid5_end_write_request (struct bio *bi, unsigned int bytes_done, int error); + +static void ops_run_io(struct stripe_head *sh) +{ + raid5_conf_t *conf = sh->raid_conf; + int i, disks = sh->disks; + + might_sleep(); + + for (i = disks; i--; ) { + int rw; + struct bio *bi; + mdk_rdev_t *rdev; + if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) + rw = WRITE; + else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags)) + rw = READ; + else + continue; + + bi = &sh->dev[i].req; + + bi->bi_rw = rw; + if (rw == WRITE) + bi->bi_end_io = raid5_end_write_request; + else + bi->bi_end_io = raid5_end_read_request; + + rcu_read_lock(); + rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = NULL; + if (rdev) + atomic_inc(&rdev->nr_pending); + rcu_read_unlock(); + + if (rdev) { + if (test_bit(STRIPE_SYNCING, &sh->state) || + test_bit(STRIPE_EXPAND_SOURCE, &sh->state) || + test_bit(STRIPE_EXPAND_READY, &sh->state)) + md_sync_acct(rdev->bdev, STRIPE_SECTORS); + + bi->bi_bdev = rdev->bdev; + pr_debug("%s: for %llu schedule op %ld on disc %d\n", + __FUNCTION__, (unsigned long long)sh->sector, + bi->bi_rw, i); + atomic_inc(&sh->count); + bi->bi_sector = sh->sector + rdev->data_offset; + bi->bi_flags = 1 << BIO_UPTODATE; + bi->bi_vcnt = 1; + bi->bi_max_vecs = 1; + bi->bi_idx = 0; + bi->bi_io_vec = &sh->dev[i].vec; + bi->bi_io_vec[0].bv_len = STRIPE_SIZE; + bi->bi_io_vec[0].bv_offset = 0; + bi->bi_size = STRIPE_SIZE; + bi->bi_next = NULL; + if (rw == WRITE && + test_bit(R5_ReWrite, &sh->dev[i].flags)) + atomic_add(STRIPE_SECTORS, + &rdev->corrected_errors); + generic_make_request(bi); + } else { + if (rw == WRITE) + set_bit(STRIPE_DEGRADED, &sh->state); + pr_debug("skip op %ld on disc %d for sector %llu\n", + bi->bi_rw, i, (unsigned long long)sh->sector); + clear_bit(R5_LOCKED, &sh->dev[i].flags); + set_bit(STRIPE_HANDLE, &sh->state); + } + } +} + +static struct dma_async_tx_descriptor * +async_copy_data(int frombio, struct bio *bio, struct page *page, + sector_t sector, struct dma_async_tx_descriptor *tx) +{ + struct bio_vec *bvl; + struct page *bio_page; + int i; + int page_offset; + + if (bio->bi_sector >= sector) + page_offset = (signed)(bio->bi_sector - sector) * 512; + else + page_offset = (signed)(sector - bio->bi_sector) * -512; + bio_for_each_segment(bvl, bio, i) { + int len = bio_iovec_idx(bio, i)->bv_len; + int clen; + int b_offset = 0; + + if (page_offset < 0) { + b_offset = -page_offset; + page_offset += b_offset; + len -= b_offset; + } + + if (len > 0 && page_offset + len > STRIPE_SIZE) + clen = STRIPE_SIZE - page_offset; + else + clen = len; + + if (clen > 0) { + b_offset += bio_iovec_idx(bio, i)->bv_offset; + bio_page = bio_iovec_idx(bio, i)->bv_page; + if (frombio) + tx = async_memcpy(page, bio_page, page_offset, + b_offset, clen, + ASYNC_TX_DEP_ACK | ASYNC_TX_KMAP_SRC, + tx, NULL, NULL); + else + tx = async_memcpy(bio_page, page, b_offset, + page_offset, clen, + ASYNC_TX_DEP_ACK | ASYNC_TX_KMAP_DST, + tx, NULL, NULL); + } + if (clen < len) /* hit end of page */ + break; + page_offset += len; + } + + return tx; +} + +static void ops_complete_biofill(void *stripe_head_ref) +{ + struct stripe_head *sh = stripe_head_ref; + struct bio *return_bi = NULL; + raid5_conf_t *conf = sh->raid_conf; + int i, more_to_read = 0; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + /* clear completed biofills */ + for (i = sh->disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + /* check if this stripe has new incoming reads */ + if (dev->toread) + more_to_read++; + + /* acknowledge completion of a biofill operation */ + /* and check if we need to reply to a read request + */ + if (test_bit(R5_Wantfill, &dev->flags) && !dev->toread) { + struct bio *rbi, *rbi2; + clear_bit(R5_Wantfill, &dev->flags); + + /* The access to dev->read is outside of the + * spin_lock_irq(&conf->device_lock), but is protected + * by the STRIPE_OP_BIOFILL pending bit + */ + BUG_ON(!dev->read); + rbi = dev->read; + dev->read = NULL; + while (rbi && rbi->bi_sector < + dev->sector + STRIPE_SECTORS) { + rbi2 = r5_next_bio(rbi, dev->sector); + spin_lock_irq(&conf->device_lock); + if (--rbi->bi_phys_segments == 0) { + rbi->bi_next = return_bi; + return_bi = rbi; + } + spin_unlock_irq(&conf->device_lock); + rbi = rbi2; + } + } + } + clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack); + clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending); + + return_io(return_bi); + + if (more_to_read) + set_bit(STRIPE_HANDLE, &sh->state); + release_stripe(sh); +} + +static void ops_run_biofill(struct stripe_head *sh) +{ + struct dma_async_tx_descriptor *tx = NULL; + raid5_conf_t *conf = sh->raid_conf; + int i; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + for (i = sh->disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (test_bit(R5_Wantfill, &dev->flags)) { + struct bio *rbi; + spin_lock_irq(&conf->device_lock); + dev->read = rbi = dev->toread; + dev->toread = NULL; + spin_unlock_irq(&conf->device_lock); + while (rbi && rbi->bi_sector < + dev->sector + STRIPE_SECTORS) { + tx = async_copy_data(0, rbi, dev->page, + dev->sector, tx); + rbi = r5_next_bio(rbi, dev->sector); + } + } + } + + atomic_inc(&sh->count); + async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx, + ops_complete_biofill, sh); +} + +static void ops_complete_compute5(void *stripe_head_ref) +{ + struct stripe_head *sh = stripe_head_ref; + int target = sh->ops.target; + struct r5dev *tgt = &sh->dev[target]; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + set_bit(R5_UPTODATE, &tgt->flags); + BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags)); + clear_bit(R5_Wantcompute, &tgt->flags); + set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete); + set_bit(STRIPE_HANDLE, &sh->state); + release_stripe(sh); +} + +static struct dma_async_tx_descriptor * +ops_run_compute5(struct stripe_head *sh, unsigned long pending) +{ + /* kernel stack size limits the total number of disks */ + int disks = sh->disks; + struct page *xor_srcs[disks]; + int target = sh->ops.target; + struct r5dev *tgt = &sh->dev[target]; + struct page *xor_dest = tgt->page; + int count = 0; + struct dma_async_tx_descriptor *tx; + int i; + + pr_debug("%s: stripe %llu block: %d\n", + __FUNCTION__, (unsigned long long)sh->sector, target); + BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags)); + + for (i = disks; i--; ) + if (i != target) + xor_srcs[count++] = sh->dev[i].page; + + atomic_inc(&sh->count); + + if (unlikely(count == 1)) + tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE, + 0, NULL, ops_complete_compute5, sh); + else + tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, + ASYNC_TX_XOR_ZERO_DST, NULL, + ops_complete_compute5, sh); + + /* ack now if postxor is not set to be run */ + if (tx && !test_bit(STRIPE_OP_POSTXOR, &pending)) + async_tx_ack(tx); + + return tx; +} + +static void ops_complete_prexor(void *stripe_head_ref) +{ + struct stripe_head *sh = stripe_head_ref; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + set_bit(STRIPE_OP_PREXOR, &sh->ops.complete); +} + +static struct dma_async_tx_descriptor * +ops_run_prexor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx) +{ + /* kernel stack size limits the total number of disks */ + int disks = sh->disks; + struct page *xor_srcs[disks]; + int count = 0, pd_idx = sh->pd_idx, i; + + /* existing parity data subtracted */ + struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + /* Only process blocks that are known to be uptodate */ + if (dev->towrite && test_bit(R5_Wantprexor, &dev->flags)) + xor_srcs[count++] = dev->page; + } + + tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, + ASYNC_TX_DEP_ACK | ASYNC_TX_XOR_DROP_DST, tx, + ops_complete_prexor, sh); + + return tx; +} + +static struct dma_async_tx_descriptor * +ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx) +{ + int disks = sh->disks; + int pd_idx = sh->pd_idx, i; + + /* check if prexor is active which means only process blocks + * that are part of a read-modify-write (Wantprexor) + */ + int prexor = test_bit(STRIPE_OP_PREXOR, &sh->ops.pending); + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + struct bio *chosen; + int towrite; + + towrite = 0; + if (prexor) { /* rmw */ + if (dev->towrite && + test_bit(R5_Wantprexor, &dev->flags)) + towrite = 1; + } else { /* rcw */ + if (i != pd_idx && dev->towrite && + test_bit(R5_LOCKED, &dev->flags)) + towrite = 1; + } + + if (towrite) { + struct bio *wbi; + + spin_lock(&sh->lock); + chosen = dev->towrite; + dev->towrite = NULL; + BUG_ON(dev->written); + wbi = dev->written = chosen; + spin_unlock(&sh->lock); + + while (wbi && wbi->bi_sector < + dev->sector + STRIPE_SECTORS) { + tx = async_copy_data(1, wbi, dev->page, + dev->sector, tx); + wbi = r5_next_bio(wbi, dev->sector); + } + } + } + + return tx; +} + +static void ops_complete_postxor(void *stripe_head_ref) +{ + struct stripe_head *sh = stripe_head_ref; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + set_bit(STRIPE_OP_POSTXOR, &sh->ops.complete); + set_bit(STRIPE_HANDLE, &sh->state); + release_stripe(sh); +} + +static void ops_complete_write(void *stripe_head_ref) +{ + struct stripe_head *sh = stripe_head_ref; + int disks = sh->disks, i, pd_idx = sh->pd_idx; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (dev->written || i == pd_idx) + set_bit(R5_UPTODATE, &dev->flags); + } + + set_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete); + set_bit(STRIPE_OP_POSTXOR, &sh->ops.complete); + + set_bit(STRIPE_HANDLE, &sh->state); + release_stripe(sh); +} + +static void +ops_run_postxor(struct stripe_head *sh, struct dma_async_tx_descriptor *tx) +{ + /* kernel stack size limits the total number of disks */ + int disks = sh->disks; + struct page *xor_srcs[disks]; + + int count = 0, pd_idx = sh->pd_idx, i; + struct page *xor_dest; + int prexor = test_bit(STRIPE_OP_PREXOR, &sh->ops.pending); + unsigned long flags; + dma_async_tx_callback callback; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + /* check if prexor is active which means only process blocks + * that are part of a read-modify-write (written) + */ + if (prexor) { + xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page; + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (dev->written) + xor_srcs[count++] = dev->page; + } + } else { + xor_dest = sh->dev[pd_idx].page; + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (i != pd_idx) + xor_srcs[count++] = dev->page; + } + } + + /* check whether this postxor is part of a write */ + callback = test_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending) ? + ops_complete_write : ops_complete_postxor; + + /* 1/ if we prexor'd then the dest is reused as a source + * 2/ if we did not prexor then we are redoing the parity + * set ASYNC_TX_XOR_DROP_DST and ASYNC_TX_XOR_ZERO_DST + * for the synchronous xor case + */ + flags = ASYNC_TX_DEP_ACK | ASYNC_TX_ACK | + (prexor ? ASYNC_TX_XOR_DROP_DST : ASYNC_TX_XOR_ZERO_DST); + + atomic_inc(&sh->count); + + if (unlikely(count == 1)) { + flags &= ~(ASYNC_TX_XOR_DROP_DST | ASYNC_TX_XOR_ZERO_DST); + tx = async_memcpy(xor_dest, xor_srcs[0], 0, 0, STRIPE_SIZE, + flags, tx, callback, sh); + } else + tx = async_xor(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, + flags, tx, callback, sh); +} + +static void ops_complete_check(void *stripe_head_ref) +{ + struct stripe_head *sh = stripe_head_ref; + int pd_idx = sh->pd_idx; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + if (test_and_clear_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending) && + sh->ops.zero_sum_result == 0) + set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags); + + set_bit(STRIPE_OP_CHECK, &sh->ops.complete); + set_bit(STRIPE_HANDLE, &sh->state); + release_stripe(sh); +} + +static void ops_run_check(struct stripe_head *sh) +{ + /* kernel stack size limits the total number of disks */ + int disks = sh->disks; + struct page *xor_srcs[disks]; + struct dma_async_tx_descriptor *tx; + + int count = 0, pd_idx = sh->pd_idx, i; + struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page; + + pr_debug("%s: stripe %llu\n", __FUNCTION__, + (unsigned long long)sh->sector); + + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (i != pd_idx) + xor_srcs[count++] = dev->page; + } + + tx = async_xor_zero_sum(xor_dest, xor_srcs, 0, count, STRIPE_SIZE, + &sh->ops.zero_sum_result, 0, NULL, NULL, NULL); + + if (tx) + set_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending); + else + clear_bit(STRIPE_OP_MOD_DMA_CHECK, &sh->ops.pending); + + atomic_inc(&sh->count); + tx = async_trigger_callback(ASYNC_TX_DEP_ACK | ASYNC_TX_ACK, tx, + ops_complete_check, sh); +} + +static void raid5_run_ops(struct stripe_head *sh, unsigned long pending) +{ + int overlap_clear = 0, i, disks = sh->disks; + struct dma_async_tx_descriptor *tx = NULL; + + if (test_bit(STRIPE_OP_BIOFILL, &pending)) { + ops_run_biofill(sh); + overlap_clear++; + } + + if (test_bit(STRIPE_OP_COMPUTE_BLK, &pending)) + tx = ops_run_compute5(sh, pending); + + if (test_bit(STRIPE_OP_PREXOR, &pending)) + tx = ops_run_prexor(sh, tx); + + if (test_bit(STRIPE_OP_BIODRAIN, &pending)) { + tx = ops_run_biodrain(sh, tx); + overlap_clear++; + } + + if (test_bit(STRIPE_OP_POSTXOR, &pending)) + ops_run_postxor(sh, tx); + + if (test_bit(STRIPE_OP_CHECK, &pending)) + ops_run_check(sh); + + if (test_bit(STRIPE_OP_IO, &pending)) + ops_run_io(sh); + + if (overlap_clear) + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (test_and_clear_bit(R5_Overlap, &dev->flags)) + wake_up(&sh->raid_conf->wait_for_overlap); + } +} + static int grow_one_stripe(raid5_conf_t *conf) { struct stripe_head *sh; @@ -537,8 +1130,8 @@ static int raid5_end_read_request(struct bio * bi, unsigned int bytes_done, if (bi == &sh->dev[i].req) break; - PRINTK("end_read_request %llu/%d, count: %d, uptodate %d.\n", - (unsigned long long)sh->sector, i, atomic_read(&sh->count), + pr_debug("end_read_request %llu/%d, count: %d, uptodate %d.\n", + (unsigned long long)sh->sector, i, atomic_read(&sh->count), uptodate); if (i == disks) { BUG(); @@ -613,7 +1206,7 @@ static int raid5_end_write_request (struct bio *bi, unsigned int bytes_done, if (bi == &sh->dev[i].req) break; - PRINTK("end_write_request %llu/%d, count %d, uptodate: %d.\n", + pr_debug("end_write_request %llu/%d, count %d, uptodate: %d.\n", (unsigned long long)sh->sector, i, atomic_read(&sh->count), uptodate); if (i == disks) { @@ -658,7 +1251,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) { char b[BDEVNAME_SIZE]; raid5_conf_t *conf = (raid5_conf_t *) mddev->private; - PRINTK("raid5: error called\n"); + pr_debug("raid5: error called\n"); if (!test_bit(Faulty, &rdev->flags)) { set_bit(MD_CHANGE_DEVS, &mddev->flags); @@ -916,137 +1509,13 @@ static void copy_data(int frombio, struct bio *bio, } } -#define check_xor() do { \ - if (count == MAX_XOR_BLOCKS) { \ - xor_block(count, STRIPE_SIZE, ptr); \ - count = 1; \ - } \ +#define check_xor() do { \ + if (count == MAX_XOR_BLOCKS) { \ + xor_blocks(count, STRIPE_SIZE, dest, ptr);\ + count = 0; \ + } \ } while(0) - -static void compute_block(struct stripe_head *sh, int dd_idx) -{ - int i, count, disks = sh->disks; - void *ptr[MAX_XOR_BLOCKS], *p; - - PRINTK("compute_block, stripe %llu, idx %d\n", - (unsigned long long)sh->sector, dd_idx); - - ptr[0] = page_address(sh->dev[dd_idx].page); - memset(ptr[0], 0, STRIPE_SIZE); - count = 1; - for (i = disks ; i--; ) { - if (i == dd_idx) - continue; - p = page_address(sh->dev[i].page); - if (test_bit(R5_UPTODATE, &sh->dev[i].flags)) - ptr[count++] = p; - else - printk(KERN_ERR "compute_block() %d, stripe %llu, %d" - " not present\n", dd_idx, - (unsigned long long)sh->sector, i); - - check_xor(); - } - if (count != 1) - xor_block(count, STRIPE_SIZE, ptr); - set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags); -} - -static void compute_parity5(struct stripe_head *sh, int method) -{ - raid5_conf_t *conf = sh->raid_conf; - int i, pd_idx = sh->pd_idx, disks = sh->disks, count; - void *ptr[MAX_XOR_BLOCKS]; - struct bio *chosen; - - PRINTK("compute_parity5, stripe %llu, method %d\n", - (unsigned long long)sh->sector, method); - - count = 1; - ptr[0] = page_address(sh->dev[pd_idx].page); - switch(method) { - case READ_MODIFY_WRITE: - BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags)); - for (i=disks ; i-- ;) { - if (i==pd_idx) - continue; - if (sh->dev[i].towrite && - test_bit(R5_UPTODATE, &sh->dev[i].flags)) { - ptr[count++] = page_address(sh->dev[i].page); - chosen = sh->dev[i].towrite; - sh->dev[i].towrite = NULL; - - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - - BUG_ON(sh->dev[i].written); - sh->dev[i].written = chosen; - check_xor(); - } - } - break; - case RECONSTRUCT_WRITE: - memset(ptr[0], 0, STRIPE_SIZE); - for (i= disks; i-- ;) - if (i!=pd_idx && sh->dev[i].towrite) { - chosen = sh->dev[i].towrite; - sh->dev[i].towrite = NULL; - - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - - BUG_ON(sh->dev[i].written); - sh->dev[i].written = chosen; - } - break; - case CHECK_PARITY: - break; - } - if (count>1) { - xor_block(count, STRIPE_SIZE, ptr); - count = 1; - } - - for (i = disks; i--;) - if (sh->dev[i].written) { - sector_t sector = sh->dev[i].sector; - struct bio *wbi = sh->dev[i].written; - while (wbi && wbi->bi_sector < sector + STRIPE_SECTORS) { - copy_data(1, wbi, sh->dev[i].page, sector); - wbi = r5_next_bio(wbi, sector); - } - - set_bit(R5_LOCKED, &sh->dev[i].flags); - set_bit(R5_UPTODATE, &sh->dev[i].flags); - } - - switch(method) { - case RECONSTRUCT_WRITE: - case CHECK_PARITY: - for (i=disks; i--;) - if (i != pd_idx) { - ptr[count++] = page_address(sh->dev[i].page); - check_xor(); - } - break; - case READ_MODIFY_WRITE: - for (i = disks; i--;) - if (sh->dev[i].written) { - ptr[count++] = page_address(sh->dev[i].page); - check_xor(); - } - } - if (count != 1) - xor_block(count, STRIPE_SIZE, ptr); - - if (method != CHECK_PARITY) { - set_bit(R5_UPTODATE, &sh->dev[pd_idx].flags); - set_bit(R5_LOCKED, &sh->dev[pd_idx].flags); - } else - clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags); -} - static void compute_parity6(struct stripe_head *sh, int method) { raid6_conf_t *conf = sh->raid_conf; @@ -1058,7 +1527,7 @@ static void compute_parity6(struct stripe_head *sh, int method) qd_idx = raid6_next_disk(pd_idx, disks); d0_idx = raid6_next_disk(qd_idx, disks); - PRINTK("compute_parity, stripe %llu, method %d\n", + pr_debug("compute_parity, stripe %llu, method %d\n", (unsigned long long)sh->sector, method); switch(method) { @@ -1132,20 +1601,20 @@ static void compute_parity6(struct stripe_head *sh, int method) static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero) { int i, count, disks = sh->disks; - void *ptr[MAX_XOR_BLOCKS], *p; + void *ptr[MAX_XOR_BLOCKS], *dest, *p; int pd_idx = sh->pd_idx; int qd_idx = raid6_next_disk(pd_idx, disks); - PRINTK("compute_block_1, stripe %llu, idx %d\n", + pr_debug("compute_block_1, stripe %llu, idx %d\n", (unsigned long long)sh->sector, dd_idx); if ( dd_idx == qd_idx ) { /* We're actually computing the Q drive */ compute_parity6(sh, UPDATE_PARITY); } else { - ptr[0] = page_address(sh->dev[dd_idx].page); - if (!nozero) memset(ptr[0], 0, STRIPE_SIZE); - count = 1; + dest = page_address(sh->dev[dd_idx].page); + if (!nozero) memset(dest, 0, STRIPE_SIZE); + count = 0; for (i = disks ; i--; ) { if (i == dd_idx || i == qd_idx) continue; @@ -1159,8 +1628,8 @@ static void compute_block_1(struct stripe_head *sh, int dd_idx, int nozero) check_xor(); } - if (count != 1) - xor_block(count, STRIPE_SIZE, ptr); + if (count) + xor_blocks(count, STRIPE_SIZE, dest, ptr); if (!nozero) set_bit(R5_UPTODATE, &sh->dev[dd_idx].flags); else clear_bit(R5_UPTODATE, &sh->dev[dd_idx].flags); } @@ -1183,7 +1652,7 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2) BUG_ON(faila == failb); if ( failb < faila ) { int tmp = faila; faila = failb; failb = tmp; } - PRINTK("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n", + pr_debug("compute_block_2, stripe %llu, idx %d,%d (%d,%d)\n", (unsigned long long)sh->sector, dd_idx1, dd_idx2, faila, failb); if ( failb == disks-1 ) { @@ -1229,7 +1698,79 @@ static void compute_block_2(struct stripe_head *sh, int dd_idx1, int dd_idx2) } } +static int +handle_write_operations5(struct stripe_head *sh, int rcw, int expand) +{ + int i, pd_idx = sh->pd_idx, disks = sh->disks; + int locked = 0; + if (rcw) { + /* if we are not expanding this is a proper write request, and + * there will be bios with new data to be drained into the + * stripe cache + */ + if (!expand) { + set_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending); + sh->ops.count++; + } + + set_bit(STRIPE_OP_POSTXOR, &sh->ops.pending); + sh->ops.count++; + + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + + if (dev->towrite) { + set_bit(R5_LOCKED, &dev->flags); + if (!expand) + clear_bit(R5_UPTODATE, &dev->flags); + locked++; + } + } + } else { + BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) || + test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags))); + + set_bit(STRIPE_OP_PREXOR, &sh->ops.pending); + set_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending); + set_bit(STRIPE_OP_POSTXOR, &sh->ops.pending); + + sh->ops.count += 3; + + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (i == pd_idx) + continue; + + /* For a read-modify write there may be blocks that are + * locked for reading while others are ready to be + * written so we distinguish these blocks by the + * R5_Wantprexor bit + */ + if (dev->towrite && + (test_bit(R5_UPTODATE, &dev->flags) || + test_bit(R5_Wantcompute, &dev->flags))) { + set_bit(R5_Wantprexor, &dev->flags); + set_bit(R5_LOCKED, &dev->flags); + clear_bit(R5_UPTODATE, &dev->flags); + locked++; + } + } + } + + /* keep the parity disk locked while asynchronous operations + * are in flight + */ + set_bit(R5_LOCKED, &sh->dev[pd_idx].flags); + clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags); + locked++; + + pr_debug("%s: stripe %llu locked: %d pending: %lx\n", + __FUNCTION__, (unsigned long long)sh->sector, + locked, sh->ops.pending); + + return locked; +} /* * Each stripe/dev can have one or more bion attached. @@ -1242,7 +1783,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in raid5_conf_t *conf = sh->raid_conf; int firstwrite=0; - PRINTK("adding bh b#%llu to stripe s#%llu\n", + pr_debug("adding bh b#%llu to stripe s#%llu\n", (unsigned long long)bi->bi_sector, (unsigned long long)sh->sector); @@ -1271,7 +1812,7 @@ static int add_stripe_bio(struct stripe_head *sh, struct bio *bi, int dd_idx, in spin_unlock_irq(&conf->device_lock); spin_unlock(&sh->lock); - PRINTK("added bi b#%llu to stripe s#%llu, disk %d.\n", + pr_debug("added bi b#%llu to stripe s#%llu, disk %d.\n", (unsigned long long)bi->bi_sector, (unsigned long long)sh->sector, dd_idx); @@ -1326,6 +1867,729 @@ static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks) return pd_idx; } +static void +handle_requests_to_failed_array(raid5_conf_t *conf, struct stripe_head *sh, + struct stripe_head_state *s, int disks, + struct bio **return_bi) +{ + int i; + for (i = disks; i--; ) { + struct bio *bi; + int bitmap_end = 0; + + if (test_bit(R5_ReadError, &sh->dev[i].flags)) { + mdk_rdev_t *rdev; + rcu_read_lock(); + rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(In_sync, &rdev->flags)) + /* multiple read failures in one stripe */ + md_error(conf->mddev, rdev); + rcu_read_unlock(); + } + spin_lock_irq(&conf->device_lock); + /* fail all writes first */ + bi = sh->dev[i].towrite; + sh->dev[i].towrite = NULL; + if (bi) { + s->to_write--; + bitmap_end = 1; + } + + if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) + wake_up(&conf->wait_for_overlap); + + while (bi && bi->bi_sector < + sh->dev[i].sector + STRIPE_SECTORS) { + struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); + clear_bit(BIO_UPTODATE, &bi->bi_flags); + if (--bi->bi_phys_segments == 0) { + md_write_end(conf->mddev); + bi->bi_next = *return_bi; + *return_bi = bi; + } + bi = nextbi; + } + /* and fail all 'written' */ + bi = sh->dev[i].written; + sh->dev[i].written = NULL; + if (bi) bitmap_end = 1; + while (bi && bi->bi_sector < + sh->dev[i].sector + STRIPE_SECTORS) { + struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); + clear_bit(BIO_UPTODATE, &bi->bi_flags); + if (--bi->bi_phys_segments == 0) { + md_write_end(conf->mddev); + bi->bi_next = *return_bi; + *return_bi = bi; + } + bi = bi2; + } + + /* fail any reads if this device is non-operational and + * the data has not reached the cache yet. + */ + if (!test_bit(R5_Wantfill, &sh->dev[i].flags) && + (!test_bit(R5_Insync, &sh->dev[i].flags) || + test_bit(R5_ReadError, &sh->dev[i].flags))) { + bi = sh->dev[i].toread; + sh->dev[i].toread = NULL; + if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) + wake_up(&conf->wait_for_overlap); + if (bi) s->to_read--; + while (bi && bi->bi_sector < + sh->dev[i].sector + STRIPE_SECTORS) { + struct bio *nextbi = + r5_next_bio(bi, sh->dev[i].sector); + clear_bit(BIO_UPTODATE, &bi->bi_flags); + if (--bi->bi_phys_segments == 0) { + bi->bi_next = *return_bi; + *return_bi = bi; + } + bi = nextbi; + } + } + spin_unlock_irq(&conf->device_lock); + if (bitmap_end) + bitmap_endwrite(conf->mddev->bitmap, sh->sector, + STRIPE_SECTORS, 0, 0); + } + +} + +/* __handle_issuing_new_read_requests5 - returns 0 if there are no more disks + * to process + */ +static int __handle_issuing_new_read_requests5(struct stripe_head *sh, + struct stripe_head_state *s, int disk_idx, int disks) +{ + struct r5dev *dev = &sh->dev[disk_idx]; + struct r5dev *failed_dev = &sh->dev[s->failed_num]; + + /* don't schedule compute operations or reads on the parity block while + * a check is in flight + */ + if ((disk_idx == sh->pd_idx) && + test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) + return ~0; + + /* is the data in this block needed, and can we get it? */ + if (!test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags) && (dev->toread || + (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) || + s->syncing || s->expanding || (s->failed && + (failed_dev->toread || (failed_dev->towrite && + !test_bit(R5_OVERWRITE, &failed_dev->flags) + ))))) { + /* 1/ We would like to get this block, possibly by computing it, + * but we might not be able to. + * + * 2/ Since parity check operations potentially make the parity + * block !uptodate it will need to be refreshed before any + * compute operations on data disks are scheduled. + * + * 3/ We hold off parity block re-reads until check operations + * have quiesced. + */ + if ((s->uptodate == disks - 1) && + !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) { + set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending); + set_bit(R5_Wantcompute, &dev->flags); + sh->ops.target = disk_idx; + s->req_compute = 1; + sh->ops.count++; + /* Careful: from this point on 'uptodate' is in the eye + * of raid5_run_ops which services 'compute' operations + * before writes. R5_Wantcompute flags a block that will + * be R5_UPTODATE by the time it is needed for a + * subsequent operation. + */ + s->uptodate++; + return 0; /* uptodate + compute == disks */ + } else if ((s->uptodate < disks - 1) && + test_bit(R5_Insync, &dev->flags)) { + /* Note: we hold off compute operations while checks are + * in flight, but we still prefer 'compute' over 'read' + * hence we only read if (uptodate < * disks-1) + */ + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) + sh->ops.count++; + s->locked++; + pr_debug("Reading block %d (sync=%d)\n", disk_idx, + s->syncing); + } + } + + return ~0; +} + +static void handle_issuing_new_read_requests5(struct stripe_head *sh, + struct stripe_head_state *s, int disks) +{ + int i; + + /* Clear completed compute operations. Parity recovery + * (STRIPE_OP_MOD_REPAIR_PD) implies a write-back which is handled + * later on in this routine + */ + if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) && + !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) { + clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete); + clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack); + clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending); + } + + /* look for blocks to read/compute, skip this if a compute + * is already in flight, or if the stripe contents are in the + * midst of changing due to a write + */ + if (!test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending) && + !test_bit(STRIPE_OP_PREXOR, &sh->ops.pending) && + !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) { + for (i = disks; i--; ) + if (__handle_issuing_new_read_requests5( + sh, s, i, disks) == 0) + break; + } + set_bit(STRIPE_HANDLE, &sh->state); +} + +static void handle_issuing_new_read_requests6(struct stripe_head *sh, + struct stripe_head_state *s, struct r6_state *r6s, + int disks) +{ + int i; + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (!test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags) && + (dev->toread || (dev->towrite && + !test_bit(R5_OVERWRITE, &dev->flags)) || + s->syncing || s->expanding || + (s->failed >= 1 && + (sh->dev[r6s->failed_num[0]].toread || + s->to_write)) || + (s->failed >= 2 && + (sh->dev[r6s->failed_num[1]].toread || + s->to_write)))) { + /* we would like to get this block, possibly + * by computing it, but we might not be able to + */ + if (s->uptodate == disks-1) { + pr_debug("Computing stripe %llu block %d\n", + (unsigned long long)sh->sector, i); + compute_block_1(sh, i, 0); + s->uptodate++; + } else if ( s->uptodate == disks-2 && s->failed >= 2 ) { + /* Computing 2-failure is *very* expensive; only + * do it if failed >= 2 + */ + int other; + for (other = disks; other--; ) { + if (other == i) + continue; + if (!test_bit(R5_UPTODATE, + &sh->dev[other].flags)) + break; + } + BUG_ON(other < 0); + pr_debug("Computing stripe %llu blocks %d,%d\n", + (unsigned long long)sh->sector, + i, other); + compute_block_2(sh, i, other); + s->uptodate += 2; + } else if (test_bit(R5_Insync, &dev->flags)) { + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + s->locked++; + pr_debug("Reading block %d (sync=%d)\n", + i, s->syncing); + } + } + } + set_bit(STRIPE_HANDLE, &sh->state); +} + + +/* handle_completed_write_requests + * any written block on an uptodate or failed drive can be returned. + * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but + * never LOCKED, so we don't need to test 'failed' directly. + */ +static void handle_completed_write_requests(raid5_conf_t *conf, + struct stripe_head *sh, int disks, struct bio **return_bi) +{ + int i; + struct r5dev *dev; + + for (i = disks; i--; ) + if (sh->dev[i].written) { + dev = &sh->dev[i]; + if (!test_bit(R5_LOCKED, &dev->flags) && + test_bit(R5_UPTODATE, &dev->flags)) { + /* We can return any write requests */ + struct bio *wbi, *wbi2; + int bitmap_end = 0; + pr_debug("Return write for disc %d\n", i); + spin_lock_irq(&conf->device_lock); + wbi = dev->written; + dev->written = NULL; + while (wbi && wbi->bi_sector < + dev->sector + STRIPE_SECTORS) { + wbi2 = r5_next_bio(wbi, dev->sector); + if (--wbi->bi_phys_segments == 0) { + md_write_end(conf->mddev); + wbi->bi_next = *return_bi; + *return_bi = wbi; + } + wbi = wbi2; + } + if (dev->towrite == NULL) + bitmap_end = 1; + spin_unlock_irq(&conf->device_lock); + if (bitmap_end) + bitmap_endwrite(conf->mddev->bitmap, + sh->sector, + STRIPE_SECTORS, + !test_bit(STRIPE_DEGRADED, &sh->state), + 0); + } + } +} + +static void handle_issuing_new_write_requests5(raid5_conf_t *conf, + struct stripe_head *sh, struct stripe_head_state *s, int disks) +{ + int rmw = 0, rcw = 0, i; + for (i = disks; i--; ) { + /* would I have to read this buffer for read_modify_write */ + struct r5dev *dev = &sh->dev[i]; + if ((dev->towrite || i == sh->pd_idx) && + !test_bit(R5_LOCKED, &dev->flags) && + !(test_bit(R5_UPTODATE, &dev->flags) || + test_bit(R5_Wantcompute, &dev->flags))) { + if (test_bit(R5_Insync, &dev->flags)) + rmw++; + else + rmw += 2*disks; /* cannot read it */ + } + /* Would I have to read this buffer for reconstruct_write */ + if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx && + !test_bit(R5_LOCKED, &dev->flags) && + !(test_bit(R5_UPTODATE, &dev->flags) || + test_bit(R5_Wantcompute, &dev->flags))) { + if (test_bit(R5_Insync, &dev->flags)) rcw++; + else + rcw += 2*disks; + } + } + pr_debug("for sector %llu, rmw=%d rcw=%d\n", + (unsigned long long)sh->sector, rmw, rcw); + set_bit(STRIPE_HANDLE, &sh->state); + if (rmw < rcw && rmw > 0) + /* prefer read-modify-write, but need to get some data */ + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if ((dev->towrite || i == sh->pd_idx) && + !test_bit(R5_LOCKED, &dev->flags) && + !(test_bit(R5_UPTODATE, &dev->flags) || + test_bit(R5_Wantcompute, &dev->flags)) && + test_bit(R5_Insync, &dev->flags)) { + if ( + test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + pr_debug("Read_old block " + "%d for r-m-w\n", i); + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + if (!test_and_set_bit( + STRIPE_OP_IO, &sh->ops.pending)) + sh->ops.count++; + s->locked++; + } else { + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); + } + } + } + if (rcw <= rmw && rcw > 0) + /* want reconstruct write, but need to get some data */ + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (!test_bit(R5_OVERWRITE, &dev->flags) && + i != sh->pd_idx && + !test_bit(R5_LOCKED, &dev->flags) && + !(test_bit(R5_UPTODATE, &dev->flags) || + test_bit(R5_Wantcompute, &dev->flags)) && + test_bit(R5_Insync, &dev->flags)) { + if ( + test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + pr_debug("Read_old block " + "%d for Reconstruct\n", i); + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + if (!test_and_set_bit( + STRIPE_OP_IO, &sh->ops.pending)) + sh->ops.count++; + s->locked++; + } else { + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); + } + } + } + /* now if nothing is locked, and if we have enough data, + * we can start a write request + */ + /* since handle_stripe can be called at any time we need to handle the + * case where a compute block operation has been submitted and then a + * subsequent call wants to start a write request. raid5_run_ops only + * handles the case where compute block and postxor are requested + * simultaneously. If this is not the case then new writes need to be + * held off until the compute completes. + */ + if ((s->req_compute || + !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) && + (s->locked == 0 && (rcw == 0 || rmw == 0) && + !test_bit(STRIPE_BIT_DELAY, &sh->state))) + s->locked += handle_write_operations5(sh, rcw == 0, 0); +} + +static void handle_issuing_new_write_requests6(raid5_conf_t *conf, + struct stripe_head *sh, struct stripe_head_state *s, + struct r6_state *r6s, int disks) +{ + int rcw = 0, must_compute = 0, pd_idx = sh->pd_idx, i; + int qd_idx = r6s->qd_idx; + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + /* Would I have to read this buffer for reconstruct_write */ + if (!test_bit(R5_OVERWRITE, &dev->flags) + && i != pd_idx && i != qd_idx + && (!test_bit(R5_LOCKED, &dev->flags) + ) && + !test_bit(R5_UPTODATE, &dev->flags)) { + if (test_bit(R5_Insync, &dev->flags)) rcw++; + else { + pr_debug("raid6: must_compute: " + "disk %d flags=%#lx\n", i, dev->flags); + must_compute++; + } + } + } + pr_debug("for sector %llu, rcw=%d, must_compute=%d\n", + (unsigned long long)sh->sector, rcw, must_compute); + set_bit(STRIPE_HANDLE, &sh->state); + + if (rcw > 0) + /* want reconstruct write, but need to get some data */ + for (i = disks; i--; ) { + struct r5dev *dev = &sh->dev[i]; + if (!test_bit(R5_OVERWRITE, &dev->flags) + && !(s->failed == 0 && (i == pd_idx || i == qd_idx)) + && !test_bit(R5_LOCKED, &dev->flags) && + !test_bit(R5_UPTODATE, &dev->flags) && + test_bit(R5_Insync, &dev->flags)) { + if ( + test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + pr_debug("Read_old stripe %llu " + "block %d for Reconstruct\n", + (unsigned long long)sh->sector, i); + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantread, &dev->flags); + s->locked++; + } else { + pr_debug("Request delayed stripe %llu " + "block %d for Reconstruct\n", + (unsigned long long)sh->sector, i); + set_bit(STRIPE_DELAYED, &sh->state); + set_bit(STRIPE_HANDLE, &sh->state); + } + } + } + /* now if nothing is locked, and if we have enough data, we can start a + * write request + */ + if (s->locked == 0 && rcw == 0 && + !test_bit(STRIPE_BIT_DELAY, &sh->state)) { + if (must_compute > 0) { + /* We have failed blocks and need to compute them */ + switch (s->failed) { + case 0: + BUG(); + case 1: + compute_block_1(sh, r6s->failed_num[0], 0); + break; + case 2: + compute_block_2(sh, r6s->failed_num[0], + r6s->failed_num[1]); + break; + default: /* This request should have been failed? */ + BUG(); + } + } + + pr_debug("Computing parity for stripe %llu\n", + (unsigned long long)sh->sector); + compute_parity6(sh, RECONSTRUCT_WRITE); + /* now every locked buffer is ready to be written */ + for (i = disks; i--; ) + if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { + pr_debug("Writing stripe %llu block %d\n", + (unsigned long long)sh->sector, i); + s->locked++; + set_bit(R5_Wantwrite, &sh->dev[i].flags); + } + /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */ + set_bit(STRIPE_INSYNC, &sh->state); + + if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + atomic_dec(&conf->preread_active_stripes); + if (atomic_read(&conf->preread_active_stripes) < + IO_THRESHOLD) + md_wakeup_thread(conf->mddev->thread); + } + } +} + +static void handle_parity_checks5(raid5_conf_t *conf, struct stripe_head *sh, + struct stripe_head_state *s, int disks) +{ + set_bit(STRIPE_HANDLE, &sh->state); + /* Take one of the following actions: + * 1/ start a check parity operation if (uptodate == disks) + * 2/ finish a check parity operation and act on the result + * 3/ skip to the writeback section if we previously + * initiated a recovery operation + */ + if (s->failed == 0 && + !test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) { + if (!test_and_set_bit(STRIPE_OP_CHECK, &sh->ops.pending)) { + BUG_ON(s->uptodate != disks); + clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags); + sh->ops.count++; + s->uptodate--; + } else if ( + test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) { + clear_bit(STRIPE_OP_CHECK, &sh->ops.ack); + clear_bit(STRIPE_OP_CHECK, &sh->ops.pending); + + if (sh->ops.zero_sum_result == 0) + /* parity is correct (on disc, + * not in buffer any more) + */ + set_bit(STRIPE_INSYNC, &sh->state); + else { + conf->mddev->resync_mismatches += + STRIPE_SECTORS; + if (test_bit( + MD_RECOVERY_CHECK, &conf->mddev->recovery)) + /* don't try to repair!! */ + set_bit(STRIPE_INSYNC, &sh->state); + else { + set_bit(STRIPE_OP_COMPUTE_BLK, + &sh->ops.pending); + set_bit(STRIPE_OP_MOD_REPAIR_PD, + &sh->ops.pending); + set_bit(R5_Wantcompute, + &sh->dev[sh->pd_idx].flags); + sh->ops.target = sh->pd_idx; + sh->ops.count++; + s->uptodate++; + } + } + } + } + + /* check if we can clear a parity disk reconstruct */ + if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) && + test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) { + + clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending); + clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete); + clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack); + clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending); + } + + /* Wait for check parity and compute block operations to complete + * before write-back + */ + if (!test_bit(STRIPE_INSYNC, &sh->state) && + !test_bit(STRIPE_OP_CHECK, &sh->ops.pending) && + !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) { + struct r5dev *dev; + /* either failed parity check, or recovery is happening */ + if (s->failed == 0) + s->failed_num = sh->pd_idx; + dev = &sh->dev[s->failed_num]; + BUG_ON(!test_bit(R5_UPTODATE, &dev->flags)); + BUG_ON(s->uptodate != disks); + + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) + sh->ops.count++; + + clear_bit(STRIPE_DEGRADED, &sh->state); + s->locked++; + set_bit(STRIPE_INSYNC, &sh->state); + } +} + + +static void handle_parity_checks6(raid5_conf_t *conf, struct stripe_head *sh, + struct stripe_head_state *s, + struct r6_state *r6s, struct page *tmp_page, + int disks) +{ + int update_p = 0, update_q = 0; + struct r5dev *dev; + int pd_idx = sh->pd_idx; + int qd_idx = r6s->qd_idx; + + set_bit(STRIPE_HANDLE, &sh->state); + + BUG_ON(s->failed > 2); + BUG_ON(s->uptodate < disks); + /* Want to check and possibly repair P and Q. + * However there could be one 'failed' device, in which + * case we can only check one of them, possibly using the + * other to generate missing data + */ + + /* If !tmp_page, we cannot do the calculations, + * but as we have set STRIPE_HANDLE, we will soon be called + * by stripe_handle with a tmp_page - just wait until then. + */ + if (tmp_page) { + if (s->failed == r6s->q_failed) { + /* The only possible failed device holds 'Q', so it + * makes sense to check P (If anything else were failed, + * we would have used P to recreate it). + */ + compute_block_1(sh, pd_idx, 1); + if (!page_is_zero(sh->dev[pd_idx].page)) { + compute_block_1(sh, pd_idx, 0); + update_p = 1; + } + } + if (!r6s->q_failed && s->failed < 2) { + /* q is not failed, and we didn't use it to generate + * anything, so it makes sense to check it + */ + memcpy(page_address(tmp_page), + page_address(sh->dev[qd_idx].page), + STRIPE_SIZE); + compute_parity6(sh, UPDATE_PARITY); + if (memcmp(page_address(tmp_page), + page_address(sh->dev[qd_idx].page), + STRIPE_SIZE) != 0) { + clear_bit(STRIPE_INSYNC, &sh->state); + update_q = 1; + } + } + if (update_p || update_q) { + conf->mddev->resync_mismatches += STRIPE_SECTORS; + if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) + /* don't try to repair!! */ + update_p = update_q = 0; + } + + /* now write out any block on a failed drive, + * or P or Q if they need it + */ + + if (s->failed == 2) { + dev = &sh->dev[r6s->failed_num[1]]; + s->locked++; + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + } + if (s->failed >= 1) { + dev = &sh->dev[r6s->failed_num[0]]; + s->locked++; + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + } + + if (update_p) { + dev = &sh->dev[pd_idx]; + s->locked++; + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + } + if (update_q) { + dev = &sh->dev[qd_idx]; + s->locked++; + set_bit(R5_LOCKED, &dev->flags); + set_bit(R5_Wantwrite, &dev->flags); + } + clear_bit(STRIPE_DEGRADED, &sh->state); + + set_bit(STRIPE_INSYNC, &sh->state); + } +} + +static void handle_stripe_expansion(raid5_conf_t *conf, struct stripe_head *sh, + struct r6_state *r6s) +{ + int i; + + /* We have read all the blocks in this stripe and now we need to + * copy some of them into a target stripe for expand. + */ + struct dma_async_tx_descriptor *tx = NULL; + clear_bit(STRIPE_EXPAND_SOURCE, &sh->state); + for (i = 0; i < sh->disks; i++) + if (i != sh->pd_idx && (r6s && i != r6s->qd_idx)) { + int dd_idx, pd_idx, j; + struct stripe_head *sh2; + + sector_t bn = compute_blocknr(sh, i); + sector_t s = raid5_compute_sector(bn, conf->raid_disks, + conf->raid_disks - + conf->max_degraded, &dd_idx, + &pd_idx, conf); + sh2 = get_active_stripe(conf, s, conf->raid_disks, + pd_idx, 1); + if (sh2 == NULL) + /* so far only the early blocks of this stripe + * have been requested. When later blocks + * get requested, we will try again + */ + continue; + if (!test_bit(STRIPE_EXPANDING, &sh2->state) || + test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) { + /* must have already done this block */ + release_stripe(sh2); + continue; + } + + /* place all the copies on one channel */ + tx = async_memcpy(sh2->dev[dd_idx].page, + sh->dev[i].page, 0, 0, STRIPE_SIZE, + ASYNC_TX_DEP_ACK, tx, NULL, NULL); + + set_bit(R5_Expanded, &sh2->dev[dd_idx].flags); + set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags); + for (j = 0; j < conf->raid_disks; j++) + if (j != sh2->pd_idx && + (r6s && j != r6s->qd_idx) && + !test_bit(R5_Expanded, &sh2->dev[j].flags)) + break; + if (j == conf->raid_disks) { + set_bit(STRIPE_EXPAND_READY, &sh2->state); + set_bit(STRIPE_HANDLE, &sh2->state); + } + release_stripe(sh2); + + /* done submitting copies, wait for them to complete */ + if (i + 1 >= sh->disks) { + async_tx_ack(tx); + dma_wait_for_async_tx(tx); + } + } +} /* * handle_stripe - do things to a stripe. @@ -1339,81 +2603,70 @@ static int stripe_to_pdidx(sector_t stripe, raid5_conf_t *conf, int disks) * schedule a write of some buffers * return confirmation of parity correctness * - * Parity calculations are done inside the stripe lock * buffers are taken off read_list or write_list, and bh_cache buffers * get BH_Lock set before the stripe lock is released. * */ - + static void handle_stripe5(struct stripe_head *sh) { raid5_conf_t *conf = sh->raid_conf; - int disks = sh->disks; - struct bio *return_bi= NULL; - struct bio *bi; - int i; - int syncing, expanding, expanded; - int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0; - int non_overwrite = 0; - int failed_num=0; + int disks = sh->disks, i; + struct bio *return_bi = NULL; + struct stripe_head_state s; struct r5dev *dev; + unsigned long pending = 0; - PRINTK("handling stripe %llu, cnt=%d, pd_idx=%d\n", - (unsigned long long)sh->sector, atomic_read(&sh->count), - sh->pd_idx); + memset(&s, 0, sizeof(s)); + pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d " + "ops=%lx:%lx:%lx\n", (unsigned long long)sh->sector, sh->state, + atomic_read(&sh->count), sh->pd_idx, + sh->ops.pending, sh->ops.ack, sh->ops.complete); spin_lock(&sh->lock); clear_bit(STRIPE_HANDLE, &sh->state); clear_bit(STRIPE_DELAYED, &sh->state); - syncing = test_bit(STRIPE_SYNCING, &sh->state); - expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state); - expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); + s.syncing = test_bit(STRIPE_SYNCING, &sh->state); + s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state); + s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); /* Now to look around and see what can be done */ rcu_read_lock(); for (i=disks; i--; ) { mdk_rdev_t *rdev; - dev = &sh->dev[i]; + struct r5dev *dev = &sh->dev[i]; clear_bit(R5_Insync, &dev->flags); - PRINTK("check %d: state 0x%lx read %p write %p written %p\n", - i, dev->flags, dev->toread, dev->towrite, dev->written); - /* maybe we can reply to a read */ - if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) { - struct bio *rbi, *rbi2; - PRINTK("Return read for disc %d\n", i); - spin_lock_irq(&conf->device_lock); - rbi = dev->toread; - dev->toread = NULL; - if (test_and_clear_bit(R5_Overlap, &dev->flags)) - wake_up(&conf->wait_for_overlap); - spin_unlock_irq(&conf->device_lock); - while (rbi && rbi->bi_sector < dev->sector + STRIPE_SECTORS) { - copy_data(0, rbi, dev->page, dev->sector); - rbi2 = r5_next_bio(rbi, dev->sector); - spin_lock_irq(&conf->device_lock); - if (--rbi->bi_phys_segments == 0) { - rbi->bi_next = return_bi; - return_bi = rbi; - } - spin_unlock_irq(&conf->device_lock); - rbi = rbi2; - } - } + pr_debug("check %d: state 0x%lx toread %p read %p write %p " + "written %p\n", i, dev->flags, dev->toread, dev->read, + dev->towrite, dev->written); - /* now count some things */ - if (test_bit(R5_LOCKED, &dev->flags)) locked++; - if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++; + /* maybe we can request a biofill operation + * + * new wantfill requests are only permitted while + * STRIPE_OP_BIOFILL is clear + */ + if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread && + !test_bit(STRIPE_OP_BIOFILL, &sh->ops.pending)) + set_bit(R5_Wantfill, &dev->flags); - - if (dev->toread) to_read++; + /* now count some things */ + if (test_bit(R5_LOCKED, &dev->flags)) s.locked++; + if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++; + if (test_bit(R5_Wantcompute, &dev->flags)) s.compute++; + + if (test_bit(R5_Wantfill, &dev->flags)) + s.to_fill++; + else if (dev->toread) + s.to_read++; if (dev->towrite) { - to_write++; + s.to_write++; if (!test_bit(R5_OVERWRITE, &dev->flags)) - non_overwrite++; + s.non_overwrite++; } - if (dev->written) written++; + if (dev->written) + s.written++; rdev = rcu_dereference(conf->disks[i].rdev); if (!rdev || !test_bit(In_sync, &rdev->flags)) { /* The ReadError flag will just be confusing now */ @@ -1422,306 +2675,131 @@ static void handle_stripe5(struct stripe_head *sh) } if (!rdev || !test_bit(In_sync, &rdev->flags) || test_bit(R5_ReadError, &dev->flags)) { - failed++; - failed_num = i; + s.failed++; + s.failed_num = i; } else set_bit(R5_Insync, &dev->flags); } rcu_read_unlock(); - PRINTK("locked=%d uptodate=%d to_read=%d" + + if (s.to_fill && !test_and_set_bit(STRIPE_OP_BIOFILL, &sh->ops.pending)) + sh->ops.count++; + + pr_debug("locked=%d uptodate=%d to_read=%d" " to_write=%d failed=%d failed_num=%d\n", - locked, uptodate, to_read, to_write, failed, failed_num); + s.locked, s.uptodate, s.to_read, s.to_write, + s.failed, s.failed_num); /* check if the array has lost two devices and, if so, some requests might * need to be failed */ - if (failed > 1 && to_read+to_write+written) { - for (i=disks; i--; ) { - int bitmap_end = 0; - - if (test_bit(R5_ReadError, &sh->dev[i].flags)) { - mdk_rdev_t *rdev; - rcu_read_lock(); - rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && test_bit(In_sync, &rdev->flags)) - /* multiple read failures in one stripe */ - md_error(conf->mddev, rdev); - rcu_read_unlock(); - } - - spin_lock_irq(&conf->device_lock); - /* fail all writes first */ - bi = sh->dev[i].towrite; - sh->dev[i].towrite = NULL; - if (bi) { to_write--; bitmap_end = 1; } - - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ - struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - bi->bi_next = return_bi; - return_bi = bi; - } - bi = nextbi; - } - /* and fail all 'written' */ - bi = sh->dev[i].written; - sh->dev[i].written = NULL; - if (bi) bitmap_end = 1; - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) { - struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - bi->bi_next = return_bi; - return_bi = bi; - } - bi = bi2; - } - - /* fail any reads if this device is non-operational */ - if (!test_bit(R5_Insync, &sh->dev[i].flags) || - test_bit(R5_ReadError, &sh->dev[i].flags)) { - bi = sh->dev[i].toread; - sh->dev[i].toread = NULL; - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - if (bi) to_read--; - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ - struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - bi->bi_next = return_bi; - return_bi = bi; - } - bi = nextbi; - } - } - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, sh->sector, - STRIPE_SECTORS, 0, 0); - } - } - if (failed > 1 && syncing) { + if (s.failed > 1 && s.to_read+s.to_write+s.written) + handle_requests_to_failed_array(conf, sh, &s, disks, + &return_bi); + if (s.failed > 1 && s.syncing) { md_done_sync(conf->mddev, STRIPE_SECTORS,0); clear_bit(STRIPE_SYNCING, &sh->state); - syncing = 0; + s.syncing = 0; } /* might be able to return some write requests if the parity block * is safe, or on a failed drive */ dev = &sh->dev[sh->pd_idx]; - if ( written && - ( (test_bit(R5_Insync, &dev->flags) && !test_bit(R5_LOCKED, &dev->flags) && - test_bit(R5_UPTODATE, &dev->flags)) - || (failed == 1 && failed_num == sh->pd_idx)) - ) { - /* any written block on an uptodate or failed drive can be returned. - * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but - * never LOCKED, so we don't need to test 'failed' directly. - */ - for (i=disks; i--; ) - if (sh->dev[i].written) { - dev = &sh->dev[i]; - if (!test_bit(R5_LOCKED, &dev->flags) && - test_bit(R5_UPTODATE, &dev->flags) ) { - /* We can return any write requests */ - struct bio *wbi, *wbi2; - int bitmap_end = 0; - PRINTK("Return write for disc %d\n", i); - spin_lock_irq(&conf->device_lock); - wbi = dev->written; - dev->written = NULL; - while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { - wbi2 = r5_next_bio(wbi, dev->sector); - if (--wbi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - wbi->bi_next = return_bi; - return_bi = wbi; - } - wbi = wbi2; - } - if (dev->towrite == NULL) - bitmap_end = 1; - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, sh->sector, - STRIPE_SECTORS, - !test_bit(STRIPE_DEGRADED, &sh->state), 0); - } - } - } + if ( s.written && + ((test_bit(R5_Insync, &dev->flags) && + !test_bit(R5_LOCKED, &dev->flags) && + test_bit(R5_UPTODATE, &dev->flags)) || + (s.failed == 1 && s.failed_num == sh->pd_idx))) + handle_completed_write_requests(conf, sh, disks, &return_bi); /* Now we might consider reading some blocks, either to check/generate * parity, or to satisfy requests * or to load a block that is being partially written. */ - if (to_read || non_overwrite || (syncing && (uptodate < disks)) || expanding) { - for (i=disks; i--;) { - dev = &sh->dev[i]; - if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - (dev->toread || - (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) || - syncing || - expanding || - (failed && (sh->dev[failed_num].toread || - (sh->dev[failed_num].towrite && !test_bit(R5_OVERWRITE, &sh->dev[failed_num].flags)))) - ) - ) { - /* we would like to get this block, possibly - * by computing it, but we might not be able to - */ - if (uptodate == disks-1) { - PRINTK("Computing block %d\n", i); - compute_block(sh, i); - uptodate++; - } else if (test_bit(R5_Insync, &dev->flags)) { - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - PRINTK("Reading block %d (sync=%d)\n", - i, syncing); - } - } - } - set_bit(STRIPE_HANDLE, &sh->state); + if (s.to_read || s.non_overwrite || + (s.syncing && (s.uptodate + s.compute < disks)) || s.expanding || + test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending)) + handle_issuing_new_read_requests5(sh, &s, disks); + + /* Now we check to see if any write operations have recently + * completed + */ + + /* leave prexor set until postxor is done, allows us to distinguish + * a rmw from a rcw during biodrain + */ + if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) && + test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) { + + clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete); + clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack); + clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending); + + for (i = disks; i--; ) + clear_bit(R5_Wantprexor, &sh->dev[i].flags); } - /* now to consider writing and what else, if anything should be read */ - if (to_write) { - int rmw=0, rcw=0; - for (i=disks ; i--;) { - /* would I have to read this buffer for read_modify_write */ + /* if only POSTXOR is set then this is an 'expand' postxor */ + if (test_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete) && + test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) { + + clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.complete); + clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.ack); + clear_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending); + + clear_bit(STRIPE_OP_POSTXOR, &sh->ops.complete); + clear_bit(STRIPE_OP_POSTXOR, &sh->ops.ack); + clear_bit(STRIPE_OP_POSTXOR, &sh->ops.pending); + + /* All the 'written' buffers and the parity block are ready to + * be written back to disk + */ + BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags)); + for (i = disks; i--; ) { dev = &sh->dev[i]; - if ((dev->towrite || i == sh->pd_idx) && - (!test_bit(R5_LOCKED, &dev->flags) - ) && - !test_bit(R5_UPTODATE, &dev->flags)) { - if (test_bit(R5_Insync, &dev->flags) -/* && !(!mddev->insync && i == sh->pd_idx) */ - ) - rmw++; - else rmw += 2*disks; /* cannot read it */ - } - /* Would I have to read this buffer for reconstruct_write */ - if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx && - (!test_bit(R5_LOCKED, &dev->flags) - ) && - !test_bit(R5_UPTODATE, &dev->flags)) { - if (test_bit(R5_Insync, &dev->flags)) rcw++; - else rcw += 2*disks; + if (test_bit(R5_LOCKED, &dev->flags) && + (i == sh->pd_idx || dev->written)) { + pr_debug("Writing block %d\n", i); + set_bit(R5_Wantwrite, &dev->flags); + if (!test_and_set_bit( + STRIPE_OP_IO, &sh->ops.pending)) + sh->ops.count++; + if (!test_bit(R5_Insync, &dev->flags) || + (i == sh->pd_idx && s.failed == 0)) + set_bit(STRIPE_INSYNC, &sh->state); } } - PRINTK("for sector %llu, rmw=%d rcw=%d\n", - (unsigned long long)sh->sector, rmw, rcw); - set_bit(STRIPE_HANDLE, &sh->state); - if (rmw < rcw && rmw > 0) - /* prefer read-modify-write, but need to get some data */ - for (i=disks; i--;) { - dev = &sh->dev[i]; - if ((dev->towrite || i == sh->pd_idx) && - !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - test_bit(R5_Insync, &dev->flags)) { - if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) - { - PRINTK("Read_old block %d for r-m-w\n", i); - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - } else { - set_bit(STRIPE_DELAYED, &sh->state); - set_bit(STRIPE_HANDLE, &sh->state); - } - } - } - if (rcw <= rmw && rcw > 0) - /* want reconstruct write, but need to get some data */ - for (i=disks; i--;) { - dev = &sh->dev[i]; - if (!test_bit(R5_OVERWRITE, &dev->flags) && i != sh->pd_idx && - !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - test_bit(R5_Insync, &dev->flags)) { - if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) - { - PRINTK("Read_old block %d for Reconstruct\n", i); - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - } else { - set_bit(STRIPE_DELAYED, &sh->state); - set_bit(STRIPE_HANDLE, &sh->state); - } - } - } - /* now if nothing is locked, and if we have enough data, we can start a write request */ - if (locked == 0 && (rcw == 0 ||rmw == 0) && - !test_bit(STRIPE_BIT_DELAY, &sh->state)) { - PRINTK("Computing parity...\n"); - compute_parity5(sh, rcw==0 ? RECONSTRUCT_WRITE : READ_MODIFY_WRITE); - /* now every locked buffer is ready to be written */ - for (i=disks; i--;) - if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { - PRINTK("Writing block %d\n", i); - locked++; - set_bit(R5_Wantwrite, &sh->dev[i].flags); - if (!test_bit(R5_Insync, &sh->dev[i].flags) - || (i==sh->pd_idx && failed == 0)) - set_bit(STRIPE_INSYNC, &sh->state); - } - if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { - atomic_dec(&conf->preread_active_stripes); - if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) - md_wakeup_thread(conf->mddev->thread); - } + if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { + atomic_dec(&conf->preread_active_stripes); + if (atomic_read(&conf->preread_active_stripes) < + IO_THRESHOLD) + md_wakeup_thread(conf->mddev->thread); } } - /* maybe we need to check and possibly fix the parity for this stripe - * Any reads will already have been scheduled, so we just see if enough data - * is available + /* Now to consider new write requests and what else, if anything + * should be read. We do not handle new writes when: + * 1/ A 'write' operation (copy+xor) is already in flight. + * 2/ A 'check' operation is in flight, as it may clobber the parity + * block. */ - if (syncing && locked == 0 && - !test_bit(STRIPE_INSYNC, &sh->state)) { - set_bit(STRIPE_HANDLE, &sh->state); - if (failed == 0) { - BUG_ON(uptodate != disks); - compute_parity5(sh, CHECK_PARITY); - uptodate--; - if (page_is_zero(sh->dev[sh->pd_idx].page)) { - /* parity is correct (on disc, not in buffer any more) */ - set_bit(STRIPE_INSYNC, &sh->state); - } else { - conf->mddev->resync_mismatches += STRIPE_SECTORS; - if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) - /* don't try to repair!! */ - set_bit(STRIPE_INSYNC, &sh->state); - else { - compute_block(sh, sh->pd_idx); - uptodate++; - } - } - } - if (!test_bit(STRIPE_INSYNC, &sh->state)) { - /* either failed parity check, or recovery is happening */ - if (failed==0) - failed_num = sh->pd_idx; - dev = &sh->dev[failed_num]; - BUG_ON(!test_bit(R5_UPTODATE, &dev->flags)); - BUG_ON(uptodate != disks); + if (s.to_write && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending) && + !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) + handle_issuing_new_write_requests5(conf, sh, &s, disks); - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - clear_bit(STRIPE_DEGRADED, &sh->state); - locked++; - set_bit(STRIPE_INSYNC, &sh->state); - } - } - if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { + /* maybe we need to check and possibly fix the parity for this stripe + * Any reads will already have been scheduled, so we just see if enough + * data is available. The parity check is held off while parity + * dependent operations are in flight. + */ + if ((s.syncing && s.locked == 0 && + !test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending) && + !test_bit(STRIPE_INSYNC, &sh->state)) || + test_bit(STRIPE_OP_CHECK, &sh->ops.pending) || + test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) + handle_parity_checks5(conf, sh, &s, disks); + + if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { md_done_sync(conf->mddev, STRIPE_SECTORS,1); clear_bit(STRIPE_SYNCING, &sh->state); } @@ -1729,186 +2807,102 @@ static void handle_stripe5(struct stripe_head *sh) /* If the failed drive is just a ReadError, then we might need to progress * the repair/check process */ - if (failed == 1 && ! conf->mddev->ro && - test_bit(R5_ReadError, &sh->dev[failed_num].flags) - && !test_bit(R5_LOCKED, &sh->dev[failed_num].flags) - && test_bit(R5_UPTODATE, &sh->dev[failed_num].flags) + if (s.failed == 1 && !conf->mddev->ro && + test_bit(R5_ReadError, &sh->dev[s.failed_num].flags) + && !test_bit(R5_LOCKED, &sh->dev[s.failed_num].flags) + && test_bit(R5_UPTODATE, &sh->dev[s.failed_num].flags) ) { - dev = &sh->dev[failed_num]; + dev = &sh->dev[s.failed_num]; if (!test_bit(R5_ReWrite, &dev->flags)) { set_bit(R5_Wantwrite, &dev->flags); + if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) + sh->ops.count++; set_bit(R5_ReWrite, &dev->flags); set_bit(R5_LOCKED, &dev->flags); - locked++; + s.locked++; } else { /* let's read it back */ set_bit(R5_Wantread, &dev->flags); + if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) + sh->ops.count++; set_bit(R5_LOCKED, &dev->flags); - locked++; + s.locked++; } } - if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { - /* Need to write out all blocks after computing parity */ - sh->disks = conf->raid_disks; - sh->pd_idx = stripe_to_pdidx(sh->sector, conf, conf->raid_disks); - compute_parity5(sh, RECONSTRUCT_WRITE); - for (i= conf->raid_disks; i--;) { - set_bit(R5_LOCKED, &sh->dev[i].flags); - locked++; + /* Finish postxor operations initiated by the expansion + * process + */ + if (test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete) && + !test_bit(STRIPE_OP_BIODRAIN, &sh->ops.pending)) { + + clear_bit(STRIPE_EXPANDING, &sh->state); + + clear_bit(STRIPE_OP_POSTXOR, &sh->ops.pending); + clear_bit(STRIPE_OP_POSTXOR, &sh->ops.ack); + clear_bit(STRIPE_OP_POSTXOR, &sh->ops.complete); + + for (i = conf->raid_disks; i--; ) { set_bit(R5_Wantwrite, &sh->dev[i].flags); + if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) + sh->ops.count++; } - clear_bit(STRIPE_EXPANDING, &sh->state); - } else if (expanded) { + } + + if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) && + !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) { + /* Need to write out all blocks after computing parity */ + sh->disks = conf->raid_disks; + sh->pd_idx = stripe_to_pdidx(sh->sector, conf, + conf->raid_disks); + s.locked += handle_write_operations5(sh, 0, 1); + } else if (s.expanded && + !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) { clear_bit(STRIPE_EXPAND_READY, &sh->state); atomic_dec(&conf->reshape_stripes); wake_up(&conf->wait_for_overlap); md_done_sync(conf->mddev, STRIPE_SECTORS, 1); } - if (expanding && locked == 0) { - /* We have read all the blocks in this stripe and now we need to - * copy some of them into a target stripe for expand. - */ - clear_bit(STRIPE_EXPAND_SOURCE, &sh->state); - for (i=0; i< sh->disks; i++) - if (i != sh->pd_idx) { - int dd_idx, pd_idx, j; - struct stripe_head *sh2; - - sector_t bn = compute_blocknr(sh, i); - sector_t s = raid5_compute_sector(bn, conf->raid_disks, - conf->raid_disks-1, - &dd_idx, &pd_idx, conf); - sh2 = get_active_stripe(conf, s, conf->raid_disks, pd_idx, 1); - if (sh2 == NULL) - /* so far only the early blocks of this stripe - * have been requested. When later blocks - * get requested, we will try again - */ - continue; - if(!test_bit(STRIPE_EXPANDING, &sh2->state) || - test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) { - /* must have already done this block */ - release_stripe(sh2); - continue; - } - memcpy(page_address(sh2->dev[dd_idx].page), - page_address(sh->dev[i].page), - STRIPE_SIZE); - set_bit(R5_Expanded, &sh2->dev[dd_idx].flags); - set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags); - for (j=0; j<conf->raid_disks; j++) - if (j != sh2->pd_idx && - !test_bit(R5_Expanded, &sh2->dev[j].flags)) - break; - if (j == conf->raid_disks) { - set_bit(STRIPE_EXPAND_READY, &sh2->state); - set_bit(STRIPE_HANDLE, &sh2->state); - } - release_stripe(sh2); - } - } + if (s.expanding && s.locked == 0) + handle_stripe_expansion(conf, sh, NULL); + + if (sh->ops.count) + pending = get_stripe_work(sh); spin_unlock(&sh->lock); - while ((bi=return_bi)) { - int bytes = bi->bi_size; + if (pending) + raid5_run_ops(sh, pending); - return_bi = bi->bi_next; - bi->bi_next = NULL; - bi->bi_size = 0; - bi->bi_end_io(bi, bytes, - test_bit(BIO_UPTODATE, &bi->bi_flags) - ? 0 : -EIO); - } - for (i=disks; i-- ;) { - int rw; - struct bio *bi; - mdk_rdev_t *rdev; - if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) - rw = WRITE; - else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags)) - rw = READ; - else - continue; - - bi = &sh->dev[i].req; - - bi->bi_rw = rw; - if (rw == WRITE) - bi->bi_end_io = raid5_end_write_request; - else - bi->bi_end_io = raid5_end_read_request; - - rcu_read_lock(); - rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && test_bit(Faulty, &rdev->flags)) - rdev = NULL; - if (rdev) - atomic_inc(&rdev->nr_pending); - rcu_read_unlock(); - - if (rdev) { - if (syncing || expanding || expanded) - md_sync_acct(rdev->bdev, STRIPE_SECTORS); + return_io(return_bi); - bi->bi_bdev = rdev->bdev; - PRINTK("for %llu schedule op %ld on disc %d\n", - (unsigned long long)sh->sector, bi->bi_rw, i); - atomic_inc(&sh->count); - bi->bi_sector = sh->sector + rdev->data_offset; - bi->bi_flags = 1 << BIO_UPTODATE; - bi->bi_vcnt = 1; - bi->bi_max_vecs = 1; - bi->bi_idx = 0; - bi->bi_io_vec = &sh->dev[i].vec; - bi->bi_io_vec[0].bv_len = STRIPE_SIZE; - bi->bi_io_vec[0].bv_offset = 0; - bi->bi_size = STRIPE_SIZE; - bi->bi_next = NULL; - if (rw == WRITE && - test_bit(R5_ReWrite, &sh->dev[i].flags)) - atomic_add(STRIPE_SECTORS, &rdev->corrected_errors); - generic_make_request(bi); - } else { - if (rw == WRITE) - set_bit(STRIPE_DEGRADED, &sh->state); - PRINTK("skip op %ld on disc %d for sector %llu\n", - bi->bi_rw, i, (unsigned long long)sh->sector); - clear_bit(R5_LOCKED, &sh->dev[i].flags); - set_bit(STRIPE_HANDLE, &sh->state); - } - } } static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) { raid6_conf_t *conf = sh->raid_conf; int disks = sh->disks; - struct bio *return_bi= NULL; - struct bio *bi; - int i; - int syncing, expanding, expanded; - int locked=0, uptodate=0, to_read=0, to_write=0, failed=0, written=0; - int non_overwrite = 0; - int failed_num[2] = {0, 0}; + struct bio *return_bi = NULL; + int i, pd_idx = sh->pd_idx; + struct stripe_head_state s; + struct r6_state r6s; struct r5dev *dev, *pdev, *qdev; - int pd_idx = sh->pd_idx; - int qd_idx = raid6_next_disk(pd_idx, disks); - int p_failed, q_failed; - PRINTK("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d, qd_idx=%d\n", - (unsigned long long)sh->sector, sh->state, atomic_read(&sh->count), - pd_idx, qd_idx); + r6s.qd_idx = raid6_next_disk(pd_idx, disks); + pr_debug("handling stripe %llu, state=%#lx cnt=%d, " + "pd_idx=%d, qd_idx=%d\n", + (unsigned long long)sh->sector, sh->state, + atomic_read(&sh->count), pd_idx, r6s.qd_idx); + memset(&s, 0, sizeof(s)); spin_lock(&sh->lock); clear_bit(STRIPE_HANDLE, &sh->state); clear_bit(STRIPE_DELAYED, &sh->state); - syncing = test_bit(STRIPE_SYNCING, &sh->state); - expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state); - expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); + s.syncing = test_bit(STRIPE_SYNCING, &sh->state); + s.expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state); + s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); /* Now to look around and see what can be done */ rcu_read_lock(); @@ -1917,12 +2911,12 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) dev = &sh->dev[i]; clear_bit(R5_Insync, &dev->flags); - PRINTK("check %d: state 0x%lx read %p write %p written %p\n", + pr_debug("check %d: state 0x%lx read %p write %p written %p\n", i, dev->flags, dev->toread, dev->towrite, dev->written); /* maybe we can reply to a read */ if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread) { struct bio *rbi, *rbi2; - PRINTK("Return read for disc %d\n", i); + pr_debug("Return read for disc %d\n", i); spin_lock_irq(&conf->device_lock); rbi = dev->toread; dev->toread = NULL; @@ -1943,17 +2937,19 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) } /* now count some things */ - if (test_bit(R5_LOCKED, &dev->flags)) locked++; - if (test_bit(R5_UPTODATE, &dev->flags)) uptodate++; + if (test_bit(R5_LOCKED, &dev->flags)) s.locked++; + if (test_bit(R5_UPTODATE, &dev->flags)) s.uptodate++; - if (dev->toread) to_read++; + if (dev->toread) + s.to_read++; if (dev->towrite) { - to_write++; + s.to_write++; if (!test_bit(R5_OVERWRITE, &dev->flags)) - non_overwrite++; + s.non_overwrite++; } - if (dev->written) written++; + if (dev->written) + s.written++; rdev = rcu_dereference(conf->disks[i].rdev); if (!rdev || !test_bit(In_sync, &rdev->flags)) { /* The ReadError flag will just be confusing now */ @@ -1962,96 +2958,27 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) } if (!rdev || !test_bit(In_sync, &rdev->flags) || test_bit(R5_ReadError, &dev->flags)) { - if ( failed < 2 ) - failed_num[failed] = i; - failed++; + if (s.failed < 2) + r6s.failed_num[s.failed] = i; + s.failed++; } else set_bit(R5_Insync, &dev->flags); } rcu_read_unlock(); - PRINTK("locked=%d uptodate=%d to_read=%d" + pr_debug("locked=%d uptodate=%d to_read=%d" " to_write=%d failed=%d failed_num=%d,%d\n", - locked, uptodate, to_read, to_write, failed, - failed_num[0], failed_num[1]); - /* check if the array has lost >2 devices and, if so, some requests might - * need to be failed + s.locked, s.uptodate, s.to_read, s.to_write, s.failed, + r6s.failed_num[0], r6s.failed_num[1]); + /* check if the array has lost >2 devices and, if so, some requests + * might need to be failed */ - if (failed > 2 && to_read+to_write+written) { - for (i=disks; i--; ) { - int bitmap_end = 0; - - if (test_bit(R5_ReadError, &sh->dev[i].flags)) { - mdk_rdev_t *rdev; - rcu_read_lock(); - rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && test_bit(In_sync, &rdev->flags)) - /* multiple read failures in one stripe */ - md_error(conf->mddev, rdev); - rcu_read_unlock(); - } - - spin_lock_irq(&conf->device_lock); - /* fail all writes first */ - bi = sh->dev[i].towrite; - sh->dev[i].towrite = NULL; - if (bi) { to_write--; bitmap_end = 1; } - - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ - struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - bi->bi_next = return_bi; - return_bi = bi; - } - bi = nextbi; - } - /* and fail all 'written' */ - bi = sh->dev[i].written; - sh->dev[i].written = NULL; - if (bi) bitmap_end = 1; - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS) { - struct bio *bi2 = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - bi->bi_next = return_bi; - return_bi = bi; - } - bi = bi2; - } - - /* fail any reads if this device is non-operational */ - if (!test_bit(R5_Insync, &sh->dev[i].flags) || - test_bit(R5_ReadError, &sh->dev[i].flags)) { - bi = sh->dev[i].toread; - sh->dev[i].toread = NULL; - if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags)) - wake_up(&conf->wait_for_overlap); - if (bi) to_read--; - while (bi && bi->bi_sector < sh->dev[i].sector + STRIPE_SECTORS){ - struct bio *nextbi = r5_next_bio(bi, sh->dev[i].sector); - clear_bit(BIO_UPTODATE, &bi->bi_flags); - if (--bi->bi_phys_segments == 0) { - bi->bi_next = return_bi; - return_bi = bi; - } - bi = nextbi; - } - } - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, sh->sector, - STRIPE_SECTORS, 0, 0); - } - } - if (failed > 2 && syncing) { + if (s.failed > 2 && s.to_read+s.to_write+s.written) + handle_requests_to_failed_array(conf, sh, &s, disks, + &return_bi); + if (s.failed > 2 && s.syncing) { md_done_sync(conf->mddev, STRIPE_SECTORS,0); clear_bit(STRIPE_SYNCING, &sh->state); - syncing = 0; + s.syncing = 0; } /* @@ -2059,279 +2986,41 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) * are safe, or on a failed drive */ pdev = &sh->dev[pd_idx]; - p_failed = (failed >= 1 && failed_num[0] == pd_idx) - || (failed >= 2 && failed_num[1] == pd_idx); - qdev = &sh->dev[qd_idx]; - q_failed = (failed >= 1 && failed_num[0] == qd_idx) - || (failed >= 2 && failed_num[1] == qd_idx); - - if ( written && - ( p_failed || ((test_bit(R5_Insync, &pdev->flags) + r6s.p_failed = (s.failed >= 1 && r6s.failed_num[0] == pd_idx) + || (s.failed >= 2 && r6s.failed_num[1] == pd_idx); + qdev = &sh->dev[r6s.qd_idx]; + r6s.q_failed = (s.failed >= 1 && r6s.failed_num[0] == r6s.qd_idx) + || (s.failed >= 2 && r6s.failed_num[1] == r6s.qd_idx); + + if ( s.written && + ( r6s.p_failed || ((test_bit(R5_Insync, &pdev->flags) && !test_bit(R5_LOCKED, &pdev->flags) - && test_bit(R5_UPTODATE, &pdev->flags))) ) && - ( q_failed || ((test_bit(R5_Insync, &qdev->flags) + && test_bit(R5_UPTODATE, &pdev->flags)))) && + ( r6s.q_failed || ((test_bit(R5_Insync, &qdev->flags) && !test_bit(R5_LOCKED, &qdev->flags) - && test_bit(R5_UPTODATE, &qdev->flags))) ) ) { - /* any written block on an uptodate or failed drive can be - * returned. Note that if we 'wrote' to a failed drive, - * it will be UPTODATE, but never LOCKED, so we don't need - * to test 'failed' directly. - */ - for (i=disks; i--; ) - if (sh->dev[i].written) { - dev = &sh->dev[i]; - if (!test_bit(R5_LOCKED, &dev->flags) && - test_bit(R5_UPTODATE, &dev->flags) ) { - /* We can return any write requests */ - int bitmap_end = 0; - struct bio *wbi, *wbi2; - PRINTK("Return write for stripe %llu disc %d\n", - (unsigned long long)sh->sector, i); - spin_lock_irq(&conf->device_lock); - wbi = dev->written; - dev->written = NULL; - while (wbi && wbi->bi_sector < dev->sector + STRIPE_SECTORS) { - wbi2 = r5_next_bio(wbi, dev->sector); - if (--wbi->bi_phys_segments == 0) { - md_write_end(conf->mddev); - wbi->bi_next = return_bi; - return_bi = wbi; - } - wbi = wbi2; - } - if (dev->towrite == NULL) - bitmap_end = 1; - spin_unlock_irq(&conf->device_lock); - if (bitmap_end) - bitmap_endwrite(conf->mddev->bitmap, sh->sector, - STRIPE_SECTORS, - !test_bit(STRIPE_DEGRADED, &sh->state), 0); - } - } - } + && test_bit(R5_UPTODATE, &qdev->flags))))) + handle_completed_write_requests(conf, sh, disks, &return_bi); /* Now we might consider reading some blocks, either to check/generate * parity, or to satisfy requests * or to load a block that is being partially written. */ - if (to_read || non_overwrite || (to_write && failed) || - (syncing && (uptodate < disks)) || expanding) { - for (i=disks; i--;) { - dev = &sh->dev[i]; - if (!test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - (dev->toread || - (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)) || - syncing || - expanding || - (failed >= 1 && (sh->dev[failed_num[0]].toread || to_write)) || - (failed >= 2 && (sh->dev[failed_num[1]].toread || to_write)) - ) - ) { - /* we would like to get this block, possibly - * by computing it, but we might not be able to - */ - if (uptodate == disks-1) { - PRINTK("Computing stripe %llu block %d\n", - (unsigned long long)sh->sector, i); - compute_block_1(sh, i, 0); - uptodate++; - } else if ( uptodate == disks-2 && failed >= 2 ) { - /* Computing 2-failure is *very* expensive; only do it if failed >= 2 */ - int other; - for (other=disks; other--;) { - if ( other == i ) - continue; - if ( !test_bit(R5_UPTODATE, &sh->dev[other].flags) ) - break; - } - BUG_ON(other < 0); - PRINTK("Computing stripe %llu blocks %d,%d\n", - (unsigned long long)sh->sector, i, other); - compute_block_2(sh, i, other); - uptodate += 2; - } else if (test_bit(R5_Insync, &dev->flags)) { - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - PRINTK("Reading block %d (sync=%d)\n", - i, syncing); - } - } - } - set_bit(STRIPE_HANDLE, &sh->state); - } + if (s.to_read || s.non_overwrite || (s.to_write && s.failed) || + (s.syncing && (s.uptodate < disks)) || s.expanding) + handle_issuing_new_read_requests6(sh, &s, &r6s, disks); /* now to consider writing and what else, if anything should be read */ - if (to_write) { - int rcw=0, must_compute=0; - for (i=disks ; i--;) { - dev = &sh->dev[i]; - /* Would I have to read this buffer for reconstruct_write */ - if (!test_bit(R5_OVERWRITE, &dev->flags) - && i != pd_idx && i != qd_idx - && (!test_bit(R5_LOCKED, &dev->flags) - ) && - !test_bit(R5_UPTODATE, &dev->flags)) { - if (test_bit(R5_Insync, &dev->flags)) rcw++; - else { - PRINTK("raid6: must_compute: disk %d flags=%#lx\n", i, dev->flags); - must_compute++; - } - } - } - PRINTK("for sector %llu, rcw=%d, must_compute=%d\n", - (unsigned long long)sh->sector, rcw, must_compute); - set_bit(STRIPE_HANDLE, &sh->state); - - if (rcw > 0) - /* want reconstruct write, but need to get some data */ - for (i=disks; i--;) { - dev = &sh->dev[i]; - if (!test_bit(R5_OVERWRITE, &dev->flags) - && !(failed == 0 && (i == pd_idx || i == qd_idx)) - && !test_bit(R5_LOCKED, &dev->flags) && !test_bit(R5_UPTODATE, &dev->flags) && - test_bit(R5_Insync, &dev->flags)) { - if (test_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) - { - PRINTK("Read_old stripe %llu block %d for Reconstruct\n", - (unsigned long long)sh->sector, i); - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantread, &dev->flags); - locked++; - } else { - PRINTK("Request delayed stripe %llu block %d for Reconstruct\n", - (unsigned long long)sh->sector, i); - set_bit(STRIPE_DELAYED, &sh->state); - set_bit(STRIPE_HANDLE, &sh->state); - } - } - } - /* now if nothing is locked, and if we have enough data, we can start a write request */ - if (locked == 0 && rcw == 0 && - !test_bit(STRIPE_BIT_DELAY, &sh->state)) { - if ( must_compute > 0 ) { - /* We have failed blocks and need to compute them */ - switch ( failed ) { - case 0: BUG(); - case 1: compute_block_1(sh, failed_num[0], 0); break; - case 2: compute_block_2(sh, failed_num[0], failed_num[1]); break; - default: BUG(); /* This request should have been failed? */ - } - } - - PRINTK("Computing parity for stripe %llu\n", (unsigned long long)sh->sector); - compute_parity6(sh, RECONSTRUCT_WRITE); - /* now every locked buffer is ready to be written */ - for (i=disks; i--;) - if (test_bit(R5_LOCKED, &sh->dev[i].flags)) { - PRINTK("Writing stripe %llu block %d\n", - (unsigned long long)sh->sector, i); - locked++; - set_bit(R5_Wantwrite, &sh->dev[i].flags); - } - /* after a RECONSTRUCT_WRITE, the stripe MUST be in-sync */ - set_bit(STRIPE_INSYNC, &sh->state); - - if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) { - atomic_dec(&conf->preread_active_stripes); - if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) - md_wakeup_thread(conf->mddev->thread); - } - } - } + if (s.to_write) + handle_issuing_new_write_requests6(conf, sh, &s, &r6s, disks); /* maybe we need to check and possibly fix the parity for this stripe - * Any reads will already have been scheduled, so we just see if enough data - * is available + * Any reads will already have been scheduled, so we just see if enough + * data is available */ - if (syncing && locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state)) { - int update_p = 0, update_q = 0; - struct r5dev *dev; - - set_bit(STRIPE_HANDLE, &sh->state); - - BUG_ON(failed>2); - BUG_ON(uptodate < disks); - /* Want to check and possibly repair P and Q. - * However there could be one 'failed' device, in which - * case we can only check one of them, possibly using the - * other to generate missing data - */ - - /* If !tmp_page, we cannot do the calculations, - * but as we have set STRIPE_HANDLE, we will soon be called - * by stripe_handle with a tmp_page - just wait until then. - */ - if (tmp_page) { - if (failed == q_failed) { - /* The only possible failed device holds 'Q', so it makes - * sense to check P (If anything else were failed, we would - * have used P to recreate it). - */ - compute_block_1(sh, pd_idx, 1); - if (!page_is_zero(sh->dev[pd_idx].page)) { - compute_block_1(sh,pd_idx,0); - update_p = 1; - } - } - if (!q_failed && failed < 2) { - /* q is not failed, and we didn't use it to generate - * anything, so it makes sense to check it - */ - memcpy(page_address(tmp_page), - page_address(sh->dev[qd_idx].page), - STRIPE_SIZE); - compute_parity6(sh, UPDATE_PARITY); - if (memcmp(page_address(tmp_page), - page_address(sh->dev[qd_idx].page), - STRIPE_SIZE)!= 0) { - clear_bit(STRIPE_INSYNC, &sh->state); - update_q = 1; - } - } - if (update_p || update_q) { - conf->mddev->resync_mismatches += STRIPE_SECTORS; - if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) - /* don't try to repair!! */ - update_p = update_q = 0; - } - - /* now write out any block on a failed drive, - * or P or Q if they need it - */ + if (s.syncing && s.locked == 0 && !test_bit(STRIPE_INSYNC, &sh->state)) + handle_parity_checks6(conf, sh, &s, &r6s, tmp_page, disks); - if (failed == 2) { - dev = &sh->dev[failed_num[1]]; - locked++; - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - } - if (failed >= 1) { - dev = &sh->dev[failed_num[0]]; - locked++; - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - } - - if (update_p) { - dev = &sh->dev[pd_idx]; - locked ++; - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - } - if (update_q) { - dev = &sh->dev[qd_idx]; - locked++; - set_bit(R5_LOCKED, &dev->flags); - set_bit(R5_Wantwrite, &dev->flags); - } - clear_bit(STRIPE_DEGRADED, &sh->state); - - set_bit(STRIPE_INSYNC, &sh->state); - } - } - - if (syncing && locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { + if (s.syncing && s.locked == 0 && test_bit(STRIPE_INSYNC, &sh->state)) { md_done_sync(conf->mddev, STRIPE_SECTORS,1); clear_bit(STRIPE_SYNCING, &sh->state); } @@ -2339,9 +3028,9 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) /* If the failed drives are just a ReadError, then we might need * to progress the repair/check process */ - if (failed <= 2 && ! conf->mddev->ro) - for (i=0; i<failed;i++) { - dev = &sh->dev[failed_num[i]]; + if (s.failed <= 2 && !conf->mddev->ro) + for (i = 0; i < s.failed; i++) { + dev = &sh->dev[r6s.failed_num[i]]; if (test_bit(R5_ReadError, &dev->flags) && !test_bit(R5_LOCKED, &dev->flags) && test_bit(R5_UPTODATE, &dev->flags) @@ -2358,7 +3047,7 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) } } - if (expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { + if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) { /* Need to write out all blocks after computing P&Q */ sh->disks = conf->raid_disks; sh->pd_idx = stripe_to_pdidx(sh->sector, conf, @@ -2366,82 +3055,24 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) compute_parity6(sh, RECONSTRUCT_WRITE); for (i = conf->raid_disks ; i-- ; ) { set_bit(R5_LOCKED, &sh->dev[i].flags); - locked++; + s.locked++; set_bit(R5_Wantwrite, &sh->dev[i].flags); } clear_bit(STRIPE_EXPANDING, &sh->state); - } else if (expanded) { + } else if (s.expanded) { clear_bit(STRIPE_EXPAND_READY, &sh->state); atomic_dec(&conf->reshape_stripes); wake_up(&conf->wait_for_overlap); md_done_sync(conf->mddev, STRIPE_SECTORS, 1); } - if (expanding && locked == 0) { - /* We have read all the blocks in this stripe and now we need to - * copy some of them into a target stripe for expand. - */ - clear_bit(STRIPE_EXPAND_SOURCE, &sh->state); - for (i = 0; i < sh->disks ; i++) - if (i != pd_idx && i != qd_idx) { - int dd_idx2, pd_idx2, j; - struct stripe_head *sh2; - - sector_t bn = compute_blocknr(sh, i); - sector_t s = raid5_compute_sector( - bn, conf->raid_disks, - conf->raid_disks - conf->max_degraded, - &dd_idx2, &pd_idx2, conf); - sh2 = get_active_stripe(conf, s, - conf->raid_disks, - pd_idx2, 1); - if (sh2 == NULL) - /* so for only the early blocks of - * this stripe have been requests. - * When later blocks get requests, we - * will try again - */ - continue; - if (!test_bit(STRIPE_EXPANDING, &sh2->state) || - test_bit(R5_Expanded, - &sh2->dev[dd_idx2].flags)) { - /* must have already done this block */ - release_stripe(sh2); - continue; - } - memcpy(page_address(sh2->dev[dd_idx2].page), - page_address(sh->dev[i].page), - STRIPE_SIZE); - set_bit(R5_Expanded, &sh2->dev[dd_idx2].flags); - set_bit(R5_UPTODATE, &sh2->dev[dd_idx2].flags); - for (j = 0 ; j < conf->raid_disks ; j++) - if (j != sh2->pd_idx && - j != raid6_next_disk(sh2->pd_idx, - sh2->disks) && - !test_bit(R5_Expanded, - &sh2->dev[j].flags)) - break; - if (j == conf->raid_disks) { - set_bit(STRIPE_EXPAND_READY, - &sh2->state); - set_bit(STRIPE_HANDLE, &sh2->state); - } - release_stripe(sh2); - } - } + if (s.expanding && s.locked == 0) + handle_stripe_expansion(conf, sh, &r6s); spin_unlock(&sh->lock); - while ((bi=return_bi)) { - int bytes = bi->bi_size; + return_io(return_bi); - return_bi = bi->bi_next; - bi->bi_next = NULL; - bi->bi_size = 0; - bi->bi_end_io(bi, bytes, - test_bit(BIO_UPTODATE, &bi->bi_flags) - ? 0 : -EIO); - } for (i=disks; i-- ;) { int rw; struct bio *bi; @@ -2470,11 +3101,11 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) rcu_read_unlock(); if (rdev) { - if (syncing || expanding || expanded) + if (s.syncing || s.expanding || s.expanded) md_sync_acct(rdev->bdev, STRIPE_SECTORS); bi->bi_bdev = rdev->bdev; - PRINTK("for %llu schedule op %ld on disc %d\n", + pr_debug("for %llu schedule op %ld on disc %d\n", (unsigned long long)sh->sector, bi->bi_rw, i); atomic_inc(&sh->count); bi->bi_sector = sh->sector + rdev->data_offset; @@ -2494,7 +3125,7 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) } else { if (rw == WRITE) set_bit(STRIPE_DEGRADED, &sh->state); - PRINTK("skip op %ld on disc %d for sector %llu\n", + pr_debug("skip op %ld on disc %d for sector %llu\n", bi->bi_rw, i, (unsigned long long)sh->sector); clear_bit(R5_LOCKED, &sh->dev[i].flags); set_bit(STRIPE_HANDLE, &sh->state); @@ -2738,7 +3369,7 @@ static int raid5_align_endio(struct bio *bi, unsigned int bytes, int error) } - PRINTK("raid5_align_endio : io error...handing IO for a retry\n"); + pr_debug("raid5_align_endio : io error...handing IO for a retry\n"); add_bio_to_retry(raid_bi, conf); return 0; @@ -2776,7 +3407,7 @@ static int chunk_aligned_read(request_queue_t *q, struct bio * raid_bio) mdk_rdev_t *rdev; if (!in_chunk_boundary(mddev, raid_bio)) { - PRINTK("chunk_aligned_read : non aligned\n"); + pr_debug("chunk_aligned_read : non aligned\n"); return 0; } /* @@ -2900,7 +3531,7 @@ static int make_request(request_queue_t *q, struct bio * bi) new_sector = raid5_compute_sector(logical_sector, disks, data_disks, &dd_idx, &pd_idx, conf); - PRINTK("raid5: make_request, sector %llu logical %llu\n", + pr_debug("raid5: make_request, sector %llu logical %llu\n", (unsigned long long)new_sector, (unsigned long long)logical_sector); @@ -3273,7 +3904,7 @@ static void raid5d (mddev_t *mddev) raid5_conf_t *conf = mddev_to_conf(mddev); int handled; - PRINTK("+++ raid5d active\n"); + pr_debug("+++ raid5d active\n"); md_check_recovery(mddev); @@ -3308,8 +3939,10 @@ static void raid5d (mddev_t *mddev) handled++; } - if (list_empty(&conf->handle_list)) + if (list_empty(&conf->handle_list)) { + async_tx_issue_pending_all(); break; + } first = conf->handle_list.next; sh = list_entry(first, struct stripe_head, lru); @@ -3325,13 +3958,13 @@ static void raid5d (mddev_t *mddev) spin_lock_irq(&conf->device_lock); } - PRINTK("%d stripes handled\n", handled); + pr_debug("%d stripes handled\n", handled); spin_unlock_irq(&conf->device_lock); unplug_slaves(mddev); - PRINTK("--- raid5d inactive\n"); + pr_debug("--- raid5d inactive\n"); } static ssize_t @@ -3507,7 +4140,7 @@ static int run(mddev_t *mddev) atomic_set(&conf->preread_active_stripes, 0); atomic_set(&conf->active_aligned_reads, 0); - PRINTK("raid5: run(%s) called.\n", mdname(mddev)); + pr_debug("raid5: run(%s) called.\n", mdname(mddev)); ITERATE_RDEV(mddev,rdev,tmp) { raid_disk = rdev->raid_disk; @@ -3690,7 +4323,7 @@ static int stop(mddev_t *mddev) return 0; } -#if RAID5_DEBUG +#ifdef DEBUG static void print_sh (struct seq_file *seq, struct stripe_head *sh) { int i; @@ -3737,7 +4370,7 @@ static void status (struct seq_file *seq, mddev_t *mddev) conf->disks[i].rdev && test_bit(In_sync, &conf->disks[i].rdev->flags) ? "U" : "_"); seq_printf (seq, "]"); -#if RAID5_DEBUG +#ifdef DEBUG seq_printf (seq, "\n"); printall(seq, conf); #endif diff --git a/drivers/md/xor.c b/drivers/md/xor.c deleted file mode 100644 index 324897c4be4e..000000000000 --- a/drivers/md/xor.c +++ /dev/null @@ -1,154 +0,0 @@ -/* - * xor.c : Multiple Devices driver for Linux - * - * Copyright (C) 1996, 1997, 1998, 1999, 2000, - * Ingo Molnar, Matti Aarnio, Jakub Jelinek, Richard Henderson. - * - * Dispatch optimized RAID-5 checksumming functions. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * You should have received a copy of the GNU General Public License - * (for example /usr/src/linux/COPYING); if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#define BH_TRACE 0 -#include <linux/module.h> -#include <linux/raid/md.h> -#include <linux/raid/xor.h> -#include <asm/xor.h> - -/* The xor routines to use. */ -static struct xor_block_template *active_template; - -void -xor_block(unsigned int count, unsigned int bytes, void **ptr) -{ - unsigned long *p0, *p1, *p2, *p3, *p4; - - p0 = (unsigned long *) ptr[0]; - p1 = (unsigned long *) ptr[1]; - if (count == 2) { - active_template->do_2(bytes, p0, p1); - return; - } - - p2 = (unsigned long *) ptr[2]; - if (count == 3) { - active_template->do_3(bytes, p0, p1, p2); - return; - } - - p3 = (unsigned long *) ptr[3]; - if (count == 4) { - active_template->do_4(bytes, p0, p1, p2, p3); - return; - } - - p4 = (unsigned long *) ptr[4]; - active_template->do_5(bytes, p0, p1, p2, p3, p4); -} - -/* Set of all registered templates. */ -static struct xor_block_template *template_list; - -#define BENCH_SIZE (PAGE_SIZE) - -static void -do_xor_speed(struct xor_block_template *tmpl, void *b1, void *b2) -{ - int speed; - unsigned long now; - int i, count, max; - - tmpl->next = template_list; - template_list = tmpl; - - /* - * Count the number of XORs done during a whole jiffy, and use - * this to calculate the speed of checksumming. We use a 2-page - * allocation to have guaranteed color L1-cache layout. - */ - max = 0; - for (i = 0; i < 5; i++) { - now = jiffies; - count = 0; - while (jiffies == now) { - mb(); - tmpl->do_2(BENCH_SIZE, b1, b2); - mb(); - count++; - mb(); - } - if (count > max) - max = count; - } - - speed = max * (HZ * BENCH_SIZE / 1024); - tmpl->speed = speed; - - printk(" %-10s: %5d.%03d MB/sec\n", tmpl->name, - speed / 1000, speed % 1000); -} - -static int -calibrate_xor_block(void) -{ - void *b1, *b2; - struct xor_block_template *f, *fastest; - - b1 = (void *) __get_free_pages(GFP_KERNEL, 2); - if (! b1) { - printk("raid5: Yikes! No memory available.\n"); - return -ENOMEM; - } - b2 = b1 + 2*PAGE_SIZE + BENCH_SIZE; - - /* - * If this arch/cpu has a short-circuited selection, don't loop through all - * the possible functions, just test the best one - */ - - fastest = NULL; - -#ifdef XOR_SELECT_TEMPLATE - fastest = XOR_SELECT_TEMPLATE(fastest); -#endif - -#define xor_speed(templ) do_xor_speed((templ), b1, b2) - - if (fastest) { - printk(KERN_INFO "raid5: automatically using best checksumming function: %s\n", - fastest->name); - xor_speed(fastest); - } else { - printk(KERN_INFO "raid5: measuring checksumming speed\n"); - XOR_TRY_TEMPLATES; - fastest = template_list; - for (f = fastest; f; f = f->next) - if (f->speed > fastest->speed) - fastest = f; - } - - printk("raid5: using function: %s (%d.%03d MB/sec)\n", - fastest->name, fastest->speed / 1000, fastest->speed % 1000); - -#undef xor_speed - - free_pages((unsigned long)b1, 2); - - active_template = fastest; - return 0; -} - -static __exit void xor_exit(void) { } - -EXPORT_SYMBOL(xor_block); -MODULE_LICENSE("GPL"); - -module_init(calibrate_xor_block); -module_exit(xor_exit); |