diff options
Diffstat (limited to 'drivers/media/dvb/dvb-usb/lmedm04.c')
-rw-r--r-- | drivers/media/dvb/dvb-usb/lmedm04.c | 292 |
1 files changed, 222 insertions, 70 deletions
diff --git a/drivers/media/dvb/dvb-usb/lmedm04.c b/drivers/media/dvb/dvb-usb/lmedm04.c index d5374ac075d3..d939fbbf9fe6 100644 --- a/drivers/media/dvb/dvb-usb/lmedm04.c +++ b/drivers/media/dvb/dvb-usb/lmedm04.c @@ -1,14 +1,17 @@ /* DVB USB compliant linux driver for * * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395 - * LME2510 + LGTDQT-P001F + * LME2510C + LG TDQY-P001F + * LME2510 + LG TDQY-P001F * * MVB7395 (LME2510C+SHARP:BS2F7HZ7395) * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V) * - * MV001F (LME2510 +LGTDQY-P001F) + * MV001F (LME2510+LGTDQY-P001F) * LG TDQY - P001F =(TDA8263 + TDA10086H) * + * MVB0001F (LME2510C+LGTDQT-P001F) + * * For firmware see Documentation/dvb/lmedm04.txt * * I2C addresses: @@ -21,7 +24,6 @@ * ***Please Note*** * There are other variants of the DM04 * ***NOT SUPPORTED*** - * MVB0001F (LME2510C+LGTDQT-P001F) * MV0194 (LME2510+SHARP0194) * MVB0194 (LME2510C+SHARP0194) * @@ -51,10 +53,7 @@ * LME2510: Non Intel USB chipsets fail to maintain High Speed on * Boot or Hot Plug. * - * DiSEqC functions are not fully supported in this driver. The main - * reason is the frontend is cut off during streaming. Allowing frontend - * access will stall the driver. Applications that attempt to this, the - * commands are ignored. + * QQbox suffers from noise on LNB voltage. * * PID functions have been removed from this driver version due to * problems with different firmware and application versions. @@ -91,9 +90,14 @@ module_param_named(debug, dvb_usb_lme2510_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able))." DVB_USB_DEBUG_STATUS); +static int dvb_usb_lme2510_firmware; +module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644); +MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG"); + + DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); -#define TUNER_LG 0x1 -#define TUNER_S7395 0x2 +#define TUNER_LG 0x1 +#define TUNER_S7395 0x2 struct lme2510_state { u8 id; @@ -107,6 +111,8 @@ struct lme2510_state { u8 i2c_tuner_gate_w; u8 i2c_tuner_gate_r; u8 i2c_tuner_addr; + u8 stream_on; + u8 one_tune; void *buffer; struct urb *lme_urb; void *usb_buffer; @@ -117,6 +123,7 @@ static int lme2510_bulk_write(struct usb_device *dev, u8 *snd, int len, u8 pipe) { int ret, actual_l; + ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe), snd, len , &actual_l, 500); return ret; @@ -151,22 +158,21 @@ static int lme2510_usb_talk(struct dvb_usb_device *d, /* the read/write capped at 512 */ memcpy(buff, wbuf, (wlen > 512) ? 512 : wlen); - ret = mutex_lock_interruptible(&d->usb_mutex); if (ret < 0) return -EAGAIN; ret |= usb_clear_halt(d->udev, usb_sndbulkpipe(d->udev, 0x01)); - msleep(5); - ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x1); - msleep(5); - ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x1)); + ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01); + + msleep(12); + + ret |= usb_clear_halt(d->udev, usb_rcvbulkpipe(d->udev, 0x01)); - msleep(5); ret |= lme2510_bulk_read(d->udev, buff, (rlen > 512) ? - 512 : rlen , 0x1); + 512 : rlen , 0x01); if (rlen > 0) memcpy(rbuf, buff, rlen); @@ -176,6 +182,18 @@ static int lme2510_usb_talk(struct dvb_usb_device *d, return (ret < 0) ? -ENODEV : 0; } +static int lme2510_usb_talk_restart(struct dvb_usb_device *d, + u8 *wbuf, int wlen, u8 *rbuf, int rlen) { + static u8 stream_on[] = LME_ST_ON_W; + int ret; + u8 rbuff[10]; + /*Send Normal Command*/ + ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); + /*Restart Stream Command*/ + ret |= lme2510_usb_talk(d, stream_on, sizeof(stream_on), + rbuff, sizeof(rbuff)); + return ret; +} static int lme2510_remote_keypress(struct dvb_usb_adapter *adap, u16 keypress) { struct dvb_usb_device *d = adap->dev; @@ -213,7 +231,6 @@ static void lme2510_int_response(struct urb *lme_urb) offset = ((lme_urb->actual_length/8) > 4) ? 4 : (lme_urb->actual_length/8) ; - for (i = 0; i < offset; ++i) { ibuf = (u8 *)&rbuf[i*8]; deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x", @@ -228,7 +245,8 @@ static void lme2510_int_response(struct urb *lme_urb) case 0xbb: switch (st->tuner_config) { case TUNER_LG: - st->signal_lock = ibuf[2]; + if (ibuf[2] > 0) + st->signal_lock = ibuf[2]; st->signal_level = ibuf[4]; st->signal_sn = ibuf[3]; st->time_key = ibuf[7]; @@ -237,7 +255,7 @@ static void lme2510_int_response(struct urb *lme_urb) /* Tweak for earlier firmware*/ if (ibuf[1] == 0x03) { st->signal_level = ibuf[3]; - st->signal_sn = ibuf[2]; + st->signal_sn = ibuf[4]; } else { st->signal_level = ibuf[4]; st->signal_sn = ibuf[5]; @@ -295,6 +313,7 @@ static int lme2510_return_status(struct usb_device *dev) { int ret = 0; u8 data[10] = {0}; + ret |= usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), 0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200); info("Firmware Status: %x (%x)", ret , data[2]); @@ -308,25 +327,48 @@ static int lme2510_msg(struct dvb_usb_device *d, int ret = 0; struct lme2510_state *st = d->priv; - if (st->i2c_talk_onoff == 1) { - if ((wbuf[2] == 0x1c) & (wbuf[3] == 0x0e)) - msleep(80); /*take your time when waiting for tune*/ - - if (mutex_lock_interruptible(&d->i2c_mutex) < 0) + if (mutex_lock_interruptible(&d->i2c_mutex) < 0) return -EAGAIN; + if (st->i2c_talk_onoff == 1) { + ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen); - mutex_unlock(&d->i2c_mutex); switch (st->tuner_config) { + case TUNER_LG: + if (wbuf[2] == 0x1c) { + if (wbuf[3] == 0x0e) { + st->signal_lock = rbuf[1]; + if ((st->stream_on & 1) && + (st->signal_lock & 0x10)) { + lme2510_usb_talk_restart(d, + wbuf, wlen, rbuf, rlen); + st->i2c_talk_onoff = 0; + } + msleep(80); + } + } + break; case TUNER_S7395: - if (wbuf[3] == 0x24) - st->signal_lock = rbuf[1]; + if (wbuf[2] == 0xd0) { + if (wbuf[3] == 0x24) { + st->signal_lock = rbuf[1]; + if ((st->stream_on & 1) && + (st->signal_lock & 0x8)) { + lme2510_usb_talk_restart(d, + wbuf, wlen, rbuf, rlen); + st->i2c_talk_onoff = 0; + } + } + if ((wbuf[3] != 0x6) & (wbuf[3] != 0x5)) + msleep(5); + + + } break; default: break; } - } else { switch (st->tuner_config) { case TUNER_LG: @@ -343,6 +385,17 @@ static int lme2510_msg(struct dvb_usb_device *d, rbuf[0] = 0x55; rbuf[1] = st->signal_sn; break; + /*DiSEqC functions as per TDA10086*/ + case 0x36: + case 0x48: + case 0x49: + case 0x4a: + case 0x4b: + case 0x4c: + case 0x4d: + if (wbuf[2] == 0x1c) + lme2510_usb_talk_restart(d, + wbuf, wlen, rbuf, rlen); default: break; } @@ -362,7 +415,31 @@ static int lme2510_msg(struct dvb_usb_device *d, rbuf[0] = 0x55; rbuf[1] = (st->signal_level & 0x80) ? 0 : st->signal_lock; + break; + case 0x6: + if (wbuf[2] == 0xd0) + lme2510_usb_talk(d, + wbuf, wlen, rbuf, rlen); + break; + case 0x1: + if (st->one_tune > 0) + break; + st->one_tune++; + st->i2c_talk_onoff = 1; + /*DiSEqC functions as per STV0288*/ + case 0x5: + case 0x7: + case 0x8: + case 0x9: + case 0xa: + case 0xb: + if (wbuf[2] == 0xd0) + lme2510_usb_talk_restart(d, + wbuf, wlen, rbuf, rlen); + break; default: + rbuf[0] = 0x55; + rbuf[1] = 0x00; break; } break; @@ -376,6 +453,8 @@ static int lme2510_msg(struct dvb_usb_device *d, } + mutex_unlock(&d->i2c_mutex); + return ret; } @@ -469,29 +548,34 @@ static int lme2510_identify_state(struct usb_device *udev, static int lme2510_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) { struct lme2510_state *st = adap->dev->priv; - static u8 reset[] = LME_RESET; static u8 stream_on[] = LME_ST_ON_W; static u8 clear_reg_3[] = LME_CLEAR_PID; static u8 rbuf[1]; + static u8 timeout; int ret = 0, len = 2, rlen = sizeof(rbuf); deb_info(1, "STM (%02x)", onoff); if (onoff == 1) { st->i2c_talk_onoff = 0; - msleep(400); /* give enough time for i2c to stop */ + timeout = 0; + /* wait for i2C to be free */ + while (mutex_lock_interruptible(&adap->dev->i2c_mutex) < 0) { + timeout++; + if (timeout > 5) + return -ENODEV; + } + msleep(100); ret |= lme2510_usb_talk(adap->dev, stream_on, len, rbuf, rlen); + st->stream_on = 1; + st->one_tune = 0; + mutex_unlock(&adap->dev->i2c_mutex); } else { deb_info(1, "STM Steam Off"); - if (st->tuner_config == TUNER_LG) - ret |= lme2510_usb_talk(adap->dev, clear_reg_3, + ret |= lme2510_usb_talk(adap->dev, clear_reg_3, sizeof(clear_reg_3), rbuf, rlen); - else - ret |= lme2510_usb_talk(adap->dev, - reset, sizeof(reset), rbuf, rlen); - - msleep(400); + st->stream_on = 0; st->i2c_talk_onoff = 1; } @@ -604,6 +688,63 @@ static int lme2510_download_firmware(struct usb_device *dev, return (ret < 0) ? -ENODEV : 0; } +/* Default firmware for LME2510C */ +const char lme_firmware[50] = "dvb-usb-lme2510c-s7395.fw"; + +static void lme_coldreset(struct usb_device *dev) +{ + int ret = 0, len_in; + u8 data[512] = {0}; + + data[0] = 0x0a; + len_in = 1; + info("FRM Firmware Cold Reset"); + ret |= lme2510_bulk_write(dev, data , len_in, 1); /*Cold Resetting*/ + ret |= lme2510_bulk_read(dev, data, len_in, 1); + return; +} + +static void lme_firmware_switch(struct usb_device *udev, int cold) +{ + const struct firmware *fw = NULL; + char lme2510c_s7395[] = "dvb-usb-lme2510c-s7395.fw"; + char lme2510c_lg[] = "dvb-usb-lme2510c-lg.fw"; + char *firm_msg[] = {"Loading", "Switching to"}; + int ret; + + if (udev->descriptor.idProduct == 0x1122) + return; + + switch (dvb_usb_lme2510_firmware) { + case 0: + default: + memcpy(&lme_firmware, lme2510c_s7395, sizeof(lme2510c_s7395)); + ret = request_firmware(&fw, lme_firmware, &udev->dev); + if (ret == 0) { + info("FRM %s S7395 Firmware", firm_msg[cold]); + break; + } + if (cold == 0) + dvb_usb_lme2510_firmware = 1; + else + cold = 0; + case 1: + memcpy(&lme_firmware, lme2510c_lg, sizeof(lme2510c_lg)); + ret = request_firmware(&fw, lme_firmware, &udev->dev); + if (ret == 0) { + info("FRM %s LG Firmware", firm_msg[cold]); + break; + } + info("FRM No Firmware Found - please install"); + dvb_usb_lme2510_firmware = 0; + cold = 0; + break; + } + release_firmware(fw); + if (cold) + lme_coldreset(udev); + return; +} static int lme2510_kill_urb(struct usb_data_stream *stream) { @@ -638,7 +779,6 @@ static struct ix2505v_config lme_tuner = { .tuner_chargepump = 0x3, }; - static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) { @@ -646,35 +786,28 @@ static int dm04_lme2510_set_voltage(struct dvb_frontend *fe, struct lme2510_state *st = adap->dev->priv; static u8 voltage_low[] = LME_VOLTAGE_L; static u8 voltage_high[] = LME_VOLTAGE_H; - static u8 reset[] = LME_RESET; - static u8 clear_reg_3[] = LME_CLEAR_PID; + static u8 lnb_on[] = LNB_ON; + static u8 lnb_off[] = LNB_OFF; static u8 rbuf[1]; int ret = 0, len = 3, rlen = 1; - msleep(100); - - if (st->tuner_config == TUNER_LG) - ret |= lme2510_usb_talk(adap->dev, clear_reg_3, - sizeof(clear_reg_3), rbuf, rlen); - else - ret |= lme2510_usb_talk(adap->dev, - reset, sizeof(reset), rbuf, rlen); - - /*always check & stop streaming*/ - lme2510_kill_urb(&adap->stream); - adap->feedcount = 0; + if (st->stream_on == 1) + return 0; - switch (voltage) { + ret |= lme2510_usb_talk(adap->dev, lnb_on, len, rbuf, rlen); - case SEC_VOLTAGE_18: - ret |= lme2510_usb_talk(adap->dev, - voltage_high, len, rbuf, rlen); + switch (voltage) { + case SEC_VOLTAGE_18: + ret |= lme2510_usb_talk(adap->dev, + voltage_high, len, rbuf, rlen); break; - case SEC_VOLTAGE_OFF: - case SEC_VOLTAGE_13: - default: - ret |= lme2510_usb_talk(adap->dev, + case SEC_VOLTAGE_OFF: + ret |= lme2510_usb_talk(adap->dev, + lnb_off, len, rbuf, rlen); + case SEC_VOLTAGE_13: + default: + ret |= lme2510_usb_talk(adap->dev, voltage_low, len, rbuf, rlen); break; @@ -714,6 +847,10 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) &adap->dev->i2c_adap, 1)) { info("TUN TDA8263 Found"); st->tuner_config = TUNER_LG; + if (dvb_usb_lme2510_firmware != 1) { + dvb_usb_lme2510_firmware = 1; + lme_firmware_switch(adap->dev->udev, 1); + } return 0; } kfree(adap->fe); @@ -735,6 +872,10 @@ static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap) &adap->dev->i2c_adap)) { st->tuner_config = TUNER_S7395; info("TUN Sharp IX2505V silicon tuner"); + if (dvb_usb_lme2510_firmware != 0) { + dvb_usb_lme2510_firmware = 0; + lme_firmware_switch(adap->dev->udev, 1); + } return 0; } kfree(adap->fe); @@ -772,6 +913,8 @@ static int lme2510_probe(struct usb_interface *intf, return -ENODEV; } + lme_firmware_switch(udev, 0); + if (0 == dvb_usb_device_init(intf, &lme2510_properties, THIS_MODULE, NULL, adapter_nr)) { info("DEV registering device driver"); @@ -839,7 +982,7 @@ static struct dvb_usb_device_properties lme2510c_properties = { .caps = DVB_USB_IS_AN_I2C_ADAPTER, .usb_ctrl = DEVICE_SPECIFIC, .download_firmware = lme2510_download_firmware, - .firmware = "dvb-usb-lme2510c-s7395.fw", + .firmware = lme_firmware, .size_of_priv = sizeof(struct lme2510_state), .num_adapters = 1, .adapter = { @@ -849,7 +992,7 @@ static struct dvb_usb_device_properties lme2510c_properties = { /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, - .count = 8, + .count = 10, .endpoint = 0x8, .u = { .bulk = { @@ -872,15 +1015,23 @@ static struct dvb_usb_device_properties lme2510c_properties = { } }; -void lme2510_exit_int(struct dvb_usb_device *d) +void *lme2510_exit_int(struct dvb_usb_device *d) { struct lme2510_state *st = d->priv; + struct dvb_usb_adapter *adap = &d->adapter[0]; + void *buffer = NULL; + + if (adap != NULL) { + lme2510_kill_urb(&adap->stream); + adap->feedcount = 0; + } + if (st->lme_urb != NULL) { - st->i2c_talk_onoff = 0; + st->i2c_talk_onoff = 1; st->signal_lock = 0; st->signal_level = 0; st->signal_sn = 0; - kfree(st->usb_buffer); + buffer = st->usb_buffer; usb_kill_urb(st->lme_urb); usb_free_coherent(d->udev, 5000, st->buffer, st->lme_urb->transfer_dma); @@ -888,18 +1039,19 @@ void lme2510_exit_int(struct dvb_usb_device *d) ir_input_unregister(d->rc_input_dev); info("Remote Stopped"); } - return; + return buffer; } void lme2510_exit(struct usb_interface *intf) { struct dvb_usb_device *d = usb_get_intfdata(intf); + void *usb_buffer; + if (d != NULL) { - d->adapter[0].feedcount = 0; - lme2510_exit_int(d); + usb_buffer = lme2510_exit_int(d); dvb_usb_device_exit(intf); + kfree(usb_buffer); } - } static struct usb_driver lme2510_driver = { @@ -932,5 +1084,5 @@ module_exit(lme2510_module_exit); MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>"); MODULE_DESCRIPTION("LM2510(C) DVB-S USB2.0"); -MODULE_VERSION("1.4"); +MODULE_VERSION("1.60"); MODULE_LICENSE("GPL"); |