diff options
Diffstat (limited to 'drivers/media/dvb/frontends/xc5000.c')
| -rw-r--r-- | drivers/media/dvb/frontends/xc5000.c | 964 |
1 files changed, 964 insertions, 0 deletions
diff --git a/drivers/media/dvb/frontends/xc5000.c b/drivers/media/dvb/frontends/xc5000.c new file mode 100644 index 000000000000..f642ca200b59 --- /dev/null +++ b/drivers/media/dvb/frontends/xc5000.c @@ -0,0 +1,964 @@ +/* + * Driver for Xceive XC5000 "QAM/8VSB single chip tuner" + * + * Copyright (c) 2007 Xceive Corporation + * Copyright (c) 2007 Steven Toth <stoth@hauppauge.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/videodev2.h> +#include <linux/delay.h> +#include <linux/dvb/frontend.h> +#include <linux/i2c.h> + +#include "dvb_frontend.h" + +#include "xc5000.h" +#include "xc5000_priv.h" + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); + +#define dprintk(level,fmt, arg...) if (debug >= level) \ + printk(KERN_INFO "%s: " fmt, "xc5000", ## arg) + +#define XC5000_DEFAULT_FIRMWARE "dvb-fe-xc5000-1.1.fw" +#define XC5000_DEFAULT_FIRMWARE_SIZE 12332 + +/* Misc Defines */ +#define MAX_TV_STANDARD 23 +#define XC_MAX_I2C_WRITE_LENGTH 64 + +/* Signal Types */ +#define XC_RF_MODE_AIR 0 +#define XC_RF_MODE_CABLE 1 + +/* Result codes */ +#define XC_RESULT_SUCCESS 0 +#define XC_RESULT_RESET_FAILURE 1 +#define XC_RESULT_I2C_WRITE_FAILURE 2 +#define XC_RESULT_I2C_READ_FAILURE 3 +#define XC_RESULT_OUT_OF_RANGE 5 + +/* Product id */ +#define XC_PRODUCT_ID_FW_NOT_LOADED 0x2000 +#define XC_PRODUCT_ID_FW_LOADED 0x1388 + +/* Registers */ +#define XREG_INIT 0x00 +#define XREG_VIDEO_MODE 0x01 +#define XREG_AUDIO_MODE 0x02 +#define XREG_RF_FREQ 0x03 +#define XREG_D_CODE 0x04 +#define XREG_IF_OUT 0x05 +#define XREG_SEEK_MODE 0x07 +#define XREG_POWER_DOWN 0x0A +#define XREG_SIGNALSOURCE 0x0D /* 0=Air, 1=Cable */ +#define XREG_SMOOTHEDCVBS 0x0E +#define XREG_XTALFREQ 0x0F +#define XREG_FINERFFREQ 0x10 +#define XREG_DDIMODE 0x11 + +#define XREG_ADC_ENV 0x00 +#define XREG_QUALITY 0x01 +#define XREG_FRAME_LINES 0x02 +#define XREG_HSYNC_FREQ 0x03 +#define XREG_LOCK 0x04 +#define XREG_FREQ_ERROR 0x05 +#define XREG_SNR 0x06 +#define XREG_VERSION 0x07 +#define XREG_PRODUCT_ID 0x08 +#define XREG_BUSY 0x09 + +/* + Basic firmware description. This will remain with + the driver for documentation purposes. + + This represents an I2C firmware file encoded as a + string of unsigned char. Format is as follows: + + char[0 ]=len0_MSB -> len = len_MSB * 256 + len_LSB + char[1 ]=len0_LSB -> length of first write transaction + char[2 ]=data0 -> first byte to be sent + char[3 ]=data1 + char[4 ]=data2 + char[ ]=... + char[M ]=dataN -> last byte to be sent + char[M+1]=len1_MSB -> len = len_MSB * 256 + len_LSB + char[M+2]=len1_LSB -> length of second write transaction + char[M+3]=data0 + char[M+4]=data1 + ... + etc. + + The [len] value should be interpreted as follows: + + len= len_MSB _ len_LSB + len=1111_1111_1111_1111 : End of I2C_SEQUENCE + len=0000_0000_0000_0000 : Reset command: Do hardware reset + len=0NNN_NNNN_NNNN_NNNN : Normal transaction: number of bytes = {1:32767) + len=1WWW_WWWW_WWWW_WWWW : Wait command: wait for {1:32767} ms + + For the RESET and WAIT commands, the two following bytes will contain + immediately the length of the following transaction. + +*/ +typedef struct { + char *Name; + u16 AudioMode; + u16 VideoMode; +} XC_TV_STANDARD; + +/* Tuner standards */ +#define MN_NTSC_PAL_BTSC 0 +#define MN_NTSC_PAL_A2 1 +#define MN_NTSC_PAL_EIAJ 2 +#define MN_NTSC_PAL_Mono 3 +#define BG_PAL_A2 4 +#define BG_PAL_NICAM 5 +#define BG_PAL_MONO 6 +#define I_PAL_NICAM 7 +#define I_PAL_NICAM_MONO 8 +#define DK_PAL_A2 9 +#define DK_PAL_NICAM 10 +#define DK_PAL_MONO 11 +#define DK_SECAM_A2DK1 12 +#define DK_SECAM_A2LDK3 13 +#define DK_SECAM_A2MONO 14 +#define L_SECAM_NICAM 15 +#define LC_SECAM_NICAM 16 +#define DTV6 17 +#define DTV8 18 +#define DTV7_8 19 +#define DTV7 20 +#define FM_Radio_INPUT2 21 +#define FM_Radio_INPUT1 22 + +XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { + {"M/N-NTSC/PAL-BTSC", 0x0400, 0x8020}, + {"M/N-NTSC/PAL-A2", 0x0600, 0x8020}, + {"M/N-NTSC/PAL-EIAJ", 0x0440, 0x8020}, + {"M/N-NTSC/PAL-Mono", 0x0478, 0x8020}, + {"B/G-PAL-A2", 0x0A00, 0x8049}, + {"B/G-PAL-NICAM", 0x0C04, 0x8049}, + {"B/G-PAL-MONO", 0x0878, 0x8059}, + {"I-PAL-NICAM", 0x1080, 0x8009}, + {"I-PAL-NICAM-MONO", 0x0E78, 0x8009}, + {"D/K-PAL-A2", 0x1600, 0x8009}, + {"D/K-PAL-NICAM", 0x0E80, 0x8009}, + {"D/K-PAL-MONO", 0x1478, 0x8009}, + {"D/K-SECAM-A2 DK1", 0x1200, 0x8009}, + {"D/K-SECAM-A2 L/DK3",0x0E00, 0x8009}, + {"D/K-SECAM-A2 MONO", 0x1478, 0x8009}, + {"L-SECAM-NICAM", 0x8E82, 0x0009}, + {"L'-SECAM-NICAM", 0x8E82, 0x4009}, + {"DTV6", 0x00C0, 0x8002}, + {"DTV8", 0x00C0, 0x800B}, + {"DTV7/8", 0x00C0, 0x801B}, + {"DTV7", 0x00C0, 0x8007}, + {"FM Radio-INPUT2", 0x9802, 0x9002}, + {"FM Radio-INPUT1", 0x0208, 0x9002} +}; + +static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len); +static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len); +static void xc5000_TunerReset(struct dvb_frontend *fe); + +static int xc_send_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) +{ + return xc5000_writeregs(priv, buf, len) + ? XC_RESULT_I2C_WRITE_FAILURE : XC_RESULT_SUCCESS; +} + +static int xc_read_i2c_data(struct xc5000_priv *priv, u8 *buf, int len) +{ + return xc5000_readregs(priv, buf, len) + ? XC_RESULT_I2C_READ_FAILURE : XC_RESULT_SUCCESS; +} + +static int xc_reset(struct dvb_frontend *fe) +{ + xc5000_TunerReset(fe); + return XC_RESULT_SUCCESS; +} + +static void xc_wait(int wait_ms) +{ + msleep(wait_ms); +} + +static void xc5000_TunerReset(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + + dprintk(1, "%s()\n", __FUNCTION__); + + if (priv->cfg->tuner_callback) { + ret = priv->cfg->tuner_callback(priv->cfg->priv, + XC5000_TUNER_RESET, 0); + if (ret) + printk(KERN_ERR "xc5000: reset failed\n"); + } else + printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n"); +} + +static int xc_write_reg(struct xc5000_priv *priv, u16 regAddr, u16 i2cData) +{ + u8 buf[4]; + int WatchDogTimer = 5; + int result; + + buf[0] = (regAddr >> 8) & 0xFF; + buf[1] = regAddr & 0xFF; + buf[2] = (i2cData >> 8) & 0xFF; + buf[3] = i2cData & 0xFF; + result = xc_send_i2c_data(priv, buf, 4); + if (result == XC_RESULT_SUCCESS) { + /* wait for busy flag to clear */ + while ((WatchDogTimer > 0) && (result == XC_RESULT_SUCCESS)) { + buf[0] = 0; + buf[1] = XREG_BUSY; + + result = xc_send_i2c_data(priv, buf, 2); + if (result == XC_RESULT_SUCCESS) { + result = xc_read_i2c_data(priv, buf, 2); + if (result == XC_RESULT_SUCCESS) { + if ((buf[0] == 0) && (buf[1] == 0)) { + /* busy flag cleared */ + break; + } else { + xc_wait(100); /* wait 5 ms */ + WatchDogTimer--; + } + } + } + } + } + if (WatchDogTimer < 0) + result = XC_RESULT_I2C_WRITE_FAILURE; + + return result; +} + +static int xc_read_reg(struct xc5000_priv *priv, u16 regAddr, u16 *i2cData) +{ + u8 buf[2]; + int result; + + buf[0] = (regAddr >> 8) & 0xFF; + buf[1] = regAddr & 0xFF; + result = xc_send_i2c_data(priv, buf, 2); + if (result != XC_RESULT_SUCCESS) + return result; + + result = xc_read_i2c_data(priv, buf, 2); + if (result != XC_RESULT_SUCCESS) + return result; + + *i2cData = buf[0] * 256 + buf[1]; + return result; +} + +static int xc_load_i2c_sequence(struct dvb_frontend *fe, u8 i2c_sequence[]) +{ + struct xc5000_priv *priv = fe->tuner_priv; + + int i, nbytes_to_send, result; + unsigned int len, pos, index; + u8 buf[XC_MAX_I2C_WRITE_LENGTH]; + + index=0; + while ((i2c_sequence[index]!=0xFF) || (i2c_sequence[index+1]!=0xFF)) { + len = i2c_sequence[index]* 256 + i2c_sequence[index+1]; + if (len == 0x0000) { + /* RESET command */ + result = xc_reset(fe); + index += 2; + if (result != XC_RESULT_SUCCESS) + return result; + } else if (len & 0x8000) { + /* WAIT command */ + xc_wait(len & 0x7FFF); + index += 2; + } else { + /* Send i2c data whilst ensuring individual transactions + * do not exceed XC_MAX_I2C_WRITE_LENGTH bytes. + */ + index += 2; + buf[0] = i2c_sequence[index]; + buf[1] = i2c_sequence[index + 1]; + pos = 2; + while (pos < len) { + if ((len - pos) > XC_MAX_I2C_WRITE_LENGTH - 2) { + nbytes_to_send = XC_MAX_I2C_WRITE_LENGTH; + } else { + nbytes_to_send = (len - pos + 2); + } + for (i=2; i<nbytes_to_send; i++) { + buf[i] = i2c_sequence[index + pos + i - 2]; + } + result = xc_send_i2c_data(priv, buf, nbytes_to_send); + + if (result != XC_RESULT_SUCCESS) + return result; + + pos += nbytes_to_send - 2; + } + index += len; + } + } + return XC_RESULT_SUCCESS; +} + +static int xc_initialize(struct xc5000_priv *priv) +{ + dprintk(1, "%s()\n", __FUNCTION__); + return xc_write_reg(priv, XREG_INIT, 0); +} + +static int xc_SetTVStandard(struct xc5000_priv *priv, + u16 VideoMode, u16 AudioMode) +{ + int ret; + dprintk(1, "%s(0x%04x,0x%04x)\n", __FUNCTION__, VideoMode, AudioMode); + dprintk(1, "%s() Standard = %s\n", + __FUNCTION__, + XC5000_Standard[priv->video_standard].Name); + + ret = xc_write_reg(priv, XREG_VIDEO_MODE, VideoMode); + if (ret == XC_RESULT_SUCCESS) + ret = xc_write_reg(priv, XREG_AUDIO_MODE, AudioMode); + + return ret; +} + +static int xc_shutdown(struct xc5000_priv *priv) +{ + return 0; + /* Fixme: cannot bring tuner back alive once shutdown + * without reloading the driver modules. + * return xc_write_reg(priv, XREG_POWER_DOWN, 0); + */ +} + +static int xc_SetSignalSource(struct xc5000_priv *priv, u16 rf_mode) +{ + dprintk(1, "%s(%d) Source = %s\n", __FUNCTION__, rf_mode, + rf_mode == XC_RF_MODE_AIR ? "ANTENNA" : "CABLE"); + + if ((rf_mode != XC_RF_MODE_AIR) && (rf_mode != XC_RF_MODE_CABLE)) + { + rf_mode = XC_RF_MODE_CABLE; + printk(KERN_ERR + "%s(), Invalid mode, defaulting to CABLE", + __FUNCTION__); + } + return xc_write_reg(priv, XREG_SIGNALSOURCE, rf_mode); +} + +static const struct dvb_tuner_ops xc5000_tuner_ops; + +static int xc_set_RF_frequency(struct xc5000_priv *priv, u32 freq_hz) +{ + u16 freq_code; + + dprintk(1, "%s(%u)\n", __FUNCTION__, freq_hz); + + if ((freq_hz > xc5000_tuner_ops.info.frequency_max) || + (freq_hz < xc5000_tuner_ops.info.frequency_min)) + return XC_RESULT_OUT_OF_RANGE; + + freq_code = (u16)(freq_hz / 15625); + + return xc_write_reg(priv, XREG_RF_FREQ, freq_code); +} + + +static int xc_set_IF_frequency(struct xc5000_priv *priv, u32 freq_khz) +{ + u32 freq_code = (freq_khz * 1024)/1000; + dprintk(1, "%s(freq_khz = %d) freq_code = 0x%x\n", + __FUNCTION__, freq_khz, freq_code); + + return xc_write_reg(priv, XREG_IF_OUT, freq_code); +} + + +static int xc_get_ADC_Envelope(struct xc5000_priv *priv, u16 *adc_envelope) +{ + return xc_read_reg(priv, XREG_ADC_ENV, adc_envelope); +} + +static int xc_get_frequency_error(struct xc5000_priv *priv, u32 *freq_error_hz) +{ + int result; + u16 regData; + u32 tmp; + + result = xc_read_reg(priv, XREG_FREQ_ERROR, ®Data); + if (result) + return result; + + tmp = (u32)regData; + (*freq_error_hz) = (tmp * 15625) / 1000; + return result; +} + +static int xc_get_lock_status(struct xc5000_priv *priv, u16 *lock_status) +{ + return xc_read_reg(priv, XREG_LOCK, lock_status); +} + +static int xc_get_version(struct xc5000_priv *priv, + u8 *hw_majorversion, u8 *hw_minorversion, + u8 *fw_majorversion, u8 *fw_minorversion) +{ + u16 data; + int result; + + result = xc_read_reg(priv, XREG_VERSION, &data); + if (result) + return result; + + (*hw_majorversion) = (data >> 12) & 0x0F; + (*hw_minorversion) = (data >> 8) & 0x0F; + (*fw_majorversion) = (data >> 4) & 0x0F; + (*fw_minorversion) = data & 0x0F; + + return 0; +} + +static int xc_get_hsync_freq(struct xc5000_priv *priv, u32 *hsync_freq_hz) +{ + u16 regData; + int result; + + result = xc_read_reg(priv, XREG_HSYNC_FREQ, ®Data); + if (result) + return result; + + (*hsync_freq_hz) = ((regData & 0x0fff) * 763)/100; + return result; +} + +static int xc_get_frame_lines(struct xc5000_priv *priv, u16 *frame_lines) +{ + return xc_read_reg(priv, XREG_FRAME_LINES, frame_lines); +} + +static int xc_get_quality(struct xc5000_priv *priv, u16 *quality) +{ + return xc_read_reg(priv, XREG_QUALITY, quality); +} + +static u16 WaitForLock(struct xc5000_priv *priv) +{ + u16 lockState = 0; + int watchDogCount = 40; + + while ((lockState == 0) && (watchDogCount > 0)) { + xc_get_lock_status(priv, &lockState); + if (lockState != 1) { + xc_wait(5); + watchDogCount--; + } + } + return lockState; +} + +static int xc_tune_channel(struct xc5000_priv *priv, u32 freq_hz) +{ + int found = 0; + + dprintk(1, "%s(%u)\n", __FUNCTION__, freq_hz); + + if (xc_set_RF_frequency(priv, freq_hz) != XC_RESULT_SUCCESS) + return 0; + + if (WaitForLock(priv) == 1) + found = 1; + + return found; +} + +static int xc5000_readreg(struct xc5000_priv *priv, u16 reg, u16 *val) +{ + u8 buf[2] = { reg >> 8, reg & 0xff }; + u8 bval[2] = { 0, 0 }; + struct i2c_msg msg[2] = { + { .addr = priv->cfg->i2c_address, + .flags = 0, .buf = &buf[0], .len = 2 }, + { .addr = priv->cfg->i2c_address, + .flags = I2C_M_RD, .buf = &bval[0], .len = 2 }, + }; + + if (i2c_transfer(priv->i2c, msg, 2) != 2) { + printk(KERN_WARNING "xc5000: I2C read failed\n"); + return -EREMOTEIO; + } + + *val = (bval[0] << 8) | bval[1]; + return 0; +} + +static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len) +{ + struct i2c_msg msg = { .addr = priv->cfg->i2c_address, + .flags = 0, .buf = buf, .len = len }; + + if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", + (int)len); + return -EREMOTEIO; + } + return 0; +} + +static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len) +{ + struct i2c_msg msg = { .addr = priv->cfg->i2c_address, + .flags = I2C_M_RD, .buf = buf, .len = len }; + + if (i2c_transfer(priv->i2c, &msg, 1) != 1) { + printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n",(int)len); + return -EREMOTEIO; + } + return 0; +} + +static int xc5000_fwupload(struct dvb_frontend* fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + const struct firmware *fw; + int ret; + + /* request the firmware, this will block and timeout */ + printk(KERN_INFO "xc5000: waiting for firmware upload (%s)...\n", + XC5000_DEFAULT_FIRMWARE); + + ret = request_firmware(&fw, XC5000_DEFAULT_FIRMWARE, &priv->i2c->dev); + if (ret) { + printk(KERN_ERR "xc5000: Upload failed. (file not found?)\n"); + ret = XC_RESULT_RESET_FAILURE; + goto out; + } else { + printk(KERN_INFO "xc5000: firmware read %Zu bytes.\n", + fw->size); + ret = XC_RESULT_SUCCESS; + } + + if (fw->size != XC5000_DEFAULT_FIRMWARE_SIZE) { + printk(KERN_ERR "xc5000: firmware incorrect size\n"); + ret = XC_RESULT_RESET_FAILURE; + } else { + printk(KERN_INFO "xc5000: firmware upload\n"); + ret = xc_load_i2c_sequence(fe, fw->data ); + } + +out: + release_firmware(fw); + return ret; +} + +static void xc_debug_dump(struct xc5000_priv *priv) +{ + u16 adc_envelope; + u32 freq_error_hz = 0; + u16 lock_status; + u32 hsync_freq_hz = 0; + u16 frame_lines; + u16 quality; + u8 hw_majorversion = 0, hw_minorversion = 0; + u8 fw_majorversion = 0, fw_minorversion = 0; + + /* Wait for stats to stabilize. + * Frame Lines needs two frame times after initial lock + * before it is valid. + */ + xc_wait(100); + + xc_get_ADC_Envelope(priv, &adc_envelope); + dprintk(1, "*** ADC envelope (0-1023) = %d\n", adc_envelope); + + xc_get_frequency_error(priv, &freq_error_hz); + dprintk(1, "*** Frequency error = %d Hz\n", freq_error_hz); + + xc_get_lock_status(priv, &lock_status); + dprintk(1, "*** Lock status (0-Wait, 1-Locked, 2-No-signal) = %d\n", + lock_status); + + xc_get_version(priv, &hw_majorversion, &hw_minorversion, + &fw_majorversion, &fw_minorversion); + dprintk(1, "*** HW: V%02x.%02x, FW: V%02x.%02x\n", + hw_majorversion, hw_minorversion, + fw_majorversion, fw_minorversion); + + xc_get_hsync_freq(priv, &hsync_freq_hz); + dprintk(1, "*** Horizontal sync frequency = %d Hz\n", hsync_freq_hz); + + xc_get_frame_lines(priv, &frame_lines); + dprintk(1, "*** Frame lines = %d\n", frame_lines); + + xc_get_quality(priv, &quality); + dprintk(1, "*** Quality (0:<8dB, 7:>56dB) = %d\n", quality); +} + +static int xc5000_set_params(struct dvb_frontend *fe, + struct dvb_frontend_parameters *params) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + + dprintk(1, "%s() frequency=%d (Hz)\n", __FUNCTION__, params->frequency); + + switch(params->u.vsb.modulation) { + case VSB_8: + case VSB_16: + dprintk(1, "%s() VSB modulation\n", __FUNCTION__); + priv->rf_mode = XC_RF_MODE_AIR; + priv->freq_hz = params->frequency - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; + break; + case QAM_64: + case QAM_256: + case QAM_AUTO: + dprintk(1, "%s() QAM modulation\n", __FUNCTION__); + priv->rf_mode = XC_RF_MODE_CABLE; + priv->freq_hz = params->frequency - 1750000; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->video_standard = DTV6; + break; + default: + return -EINVAL; + } + + dprintk(1, "%s() frequency=%d (compensated)\n", + __FUNCTION__, priv->freq_hz); + + ret = xc_SetSignalSource(priv, priv->rf_mode); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR + "xc5000: xc_SetSignalSource(%d) failed\n", + priv->rf_mode); + return -EREMOTEIO; + } + + ret = xc_SetTVStandard(priv, + XC5000_Standard[priv->video_standard].VideoMode, + XC5000_Standard[priv->video_standard].AudioMode); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); + return -EREMOTEIO; + } + + ret = xc_set_IF_frequency(priv, priv->cfg->if_khz); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n", + priv->cfg->if_khz); + return -EIO; + } + + xc_tune_channel(priv, priv->freq_hz); + + if (debug) + xc_debug_dump(priv); + + return 0; +} + +static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); + +static int xc5000_set_analog_params(struct dvb_frontend *fe, + struct analog_parameters *params) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + + if(priv->fwloaded == 0) + xc_load_fw_and_init_tuner(fe); + + dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", + __FUNCTION__, params->frequency); + + priv->rf_mode = XC_RF_MODE_CABLE; /* Fix me: it could be air. */ + + /* params->frequency is in units of 62.5khz */ + priv->freq_hz = params->frequency * 62500; + + /* FIX ME: Some video standards may have several possible audio + standards. We simply default to one of them here. + */ + if(params->std & V4L2_STD_MN) { + /* default to BTSC audio standard */ + priv->video_standard = MN_NTSC_PAL_BTSC; + goto tune_channel; + } + + if(params->std & V4L2_STD_PAL_BG) { + /* default to NICAM audio standard */ + priv->video_standard = BG_PAL_NICAM; + goto tune_channel; + } + + if(params->std & V4L2_STD_PAL_I) { + /* default to NICAM audio standard */ + priv->video_standard = I_PAL_NICAM; + goto tune_channel; + } + + if(params->std & V4L2_STD_PAL_DK) { + /* default to NICAM audio standard */ + priv->video_standard = DK_PAL_NICAM; + goto tune_channel; + } + + if(params->std & V4L2_STD_SECAM_DK) { + /* default to A2 DK1 audio standard */ + priv->video_standard = DK_SECAM_A2DK1; + goto tune_channel; + } + + if(params->std & V4L2_STD_SECAM_L) { + priv->video_standard = L_SECAM_NICAM; + goto tune_channel; + } + + if(params->std & V4L2_STD_SECAM_LC) { + priv->video_standard = LC_SECAM_NICAM; + goto tune_channel; + } + +tune_channel: + ret = xc_SetSignalSource(priv, priv->rf_mode); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR + "xc5000: xc_SetSignalSource(%d) failed\n", + priv->rf_mode); + return -EREMOTEIO; + } + + ret = xc_SetTVStandard(priv, + XC5000_Standard[priv->video_standard].VideoMode, + XC5000_Standard[priv->video_standard].AudioMode); + if (ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: xc_SetTVStandard failed\n"); + return -EREMOTEIO; + } + + xc_tune_channel(priv, priv->freq_hz); + + if (debug) + xc_debug_dump(priv); + + return 0; +} + +static int xc5000_get_frequency(struct dvb_frontend *fe, u32 *freq) +{ + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __FUNCTION__); + *freq = priv->freq_hz; + return 0; +} + +static int xc5000_get_bandwidth(struct dvb_frontend *fe, u32 *bw) +{ + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __FUNCTION__); + + *bw = priv->bandwidth; + return 0; +} + +static int xc5000_get_status(struct dvb_frontend *fe, u32 *status) +{ + struct xc5000_priv *priv = fe->tuner_priv; + u16 lock_status = 0; + + xc_get_lock_status(priv, &lock_status); + + dprintk(1, "%s() lock_status = 0x%08x\n", __FUNCTION__, lock_status); + + *status = lock_status; + + return 0; +} + +static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret = 0; + + if (priv->fwloaded == 0) { + ret = xc5000_fwupload(fe); + if (ret != XC_RESULT_SUCCESS) + return ret; + priv->fwloaded = 1; + } + + /* Start the tuner self-calibration process */ + ret |= xc_initialize(priv); + + /* Wait for calibration to complete. + * We could continue but XC5000 will clock stretch subsequent + * I2C transactions until calibration is complete. This way we + * don't have to rely on clock stretching working. + */ + xc_wait( 100 ); + + /* Default to "CABLE" mode */ + ret |= xc_write_reg(priv, XREG_SIGNALSOURCE, XC_RF_MODE_CABLE); + + return ret; +} + +static int xc5000_sleep(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + + dprintk(1, "%s()\n", __FUNCTION__); + + /* On Pinnacle PCTV HD 800i, the tuner cannot be reinitialized + * once shutdown without reloading the driver. Maybe I am not + * doing something right. + * + */ + + ret = xc_shutdown(priv); + if(ret != XC_RESULT_SUCCESS) { + printk(KERN_ERR + "xc5000: %s() unable to shutdown tuner\n", + __FUNCTION__); + return -EREMOTEIO; + } + else { + /* priv->fwloaded = 0; */ + return XC_RESULT_SUCCESS; + } +} + +static int xc5000_init(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + dprintk(1, "%s()\n", __FUNCTION__); + + if (xc_load_fw_and_init_tuner(fe) != XC_RESULT_SUCCESS) { + printk(KERN_ERR "xc5000: Unable to initialise tuner\n"); + return -EREMOTEIO; + } + + if (debug) + xc_debug_dump(priv); + + return 0; +} + +static int xc5000_release(struct dvb_frontend *fe) +{ + dprintk(1, "%s()\n", __FUNCTION__); + kfree(fe->tuner_priv); + fe->tuner_priv = NULL; + return 0; +} + +static const struct dvb_tuner_ops xc5000_tuner_ops = { + .info = { + .name = "Xceive XC5000", + .frequency_min = 1000000, + .frequency_max = 1023000000, + .frequency_step = 50000, + }, + + .release = xc5000_release, + .init = xc5000_init, + .sleep = xc5000_sleep, + + .set_params = xc5000_set_params, + .set_analog_params = xc5000_set_analog_params, + .get_frequency = xc5000_get_frequency, + .get_bandwidth = xc5000_get_bandwidth, + .get_status = xc5000_get_status +}; + +struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct xc5000_config *cfg) +{ + struct xc5000_priv *priv = NULL; + u16 id = 0; + + dprintk(1, "%s()\n", __FUNCTION__); + + priv = kzalloc(sizeof(struct xc5000_priv), GFP_KERNEL); + if (priv == NULL) + return NULL; + + priv->cfg = cfg; + priv->bandwidth = BANDWIDTH_6_MHZ; + priv->i2c = i2c; + + /* Check if firmware has been loaded. It is possible that another + instance of the driver has loaded the firmware. + */ + if (xc5000_readreg(priv, XREG_PRODUCT_ID, &id) != 0) { + kfree(priv); + return NULL; + } + + switch(id) { + case XC_PRODUCT_ID_FW_LOADED: + printk(KERN_INFO + "xc5000: Successfully identified at address 0x%02x\n", + cfg->i2c_address); + printk(KERN_INFO + "xc5000: Firmware has been loaded previously\n"); + priv->fwloaded = 1; + break; + case XC_PRODUCT_ID_FW_NOT_LOADED: + printk(KERN_INFO + "xc5000: Successfully identified at address 0x%02x\n", + cfg->i2c_address); + printk(KERN_INFO + "xc5000: Firmware has not been loaded previously\n"); + priv->fwloaded = 0; + break; + default: + printk(KERN_ERR + "xc5000: Device not found at addr 0x%02x (0x%x)\n", + cfg->i2c_address, id); + kfree(priv); + return NULL; + } + + memcpy(&fe->ops.tuner_ops, &xc5000_tuner_ops, + sizeof(struct dvb_tuner_ops)); + + fe->tuner_priv = priv; + + return fe; +} +EXPORT_SYMBOL(xc5000_attach); + +MODULE_AUTHOR("Steven Toth"); +MODULE_DESCRIPTION("Xceive xc5000 silicon tuner driver"); +MODULE_LICENSE("GPL"); |