diff options
Diffstat (limited to 'drivers/media/dvb/ttpci/budget-ci.c')
| -rw-r--r-- | drivers/media/dvb/ttpci/budget-ci.c | 1591 |
1 files changed, 0 insertions, 1591 deletions
diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c deleted file mode 100644 index 98e524178765..000000000000 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ /dev/null @@ -1,1591 +0,0 @@ -/* - * budget-ci.c: driver for the SAA7146 based Budget DVB cards - * - * Compiled from various sources by Michael Hunold <michael@mihu.de> - * - * msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM> - * partially based on the Siemens DVB driver by Ralph+Marcus Metzler - * - * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * Or, point your browser to http://www.gnu.org/copyleft/gpl.html - * - * - * the project's page is at http://www.linuxtv.org/ - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/interrupt.h> -#include <linux/spinlock.h> -#include <media/rc-core.h> - -#include "budget.h" - -#include "dvb_ca_en50221.h" -#include "stv0299.h" -#include "stv0297.h" -#include "tda1004x.h" -#include "stb0899_drv.h" -#include "stb0899_reg.h" -#include "stb0899_cfg.h" -#include "stb6100.h" -#include "stb6100_cfg.h" -#include "lnbp21.h" -#include "bsbe1.h" -#include "bsru6.h" -#include "tda1002x.h" -#include "tda827x.h" -#include "bsbe1-d01a.h" - -#define MODULE_NAME "budget_ci" - -/* - * Regarding DEBIADDR_IR: - * Some CI modules hang if random addresses are read. - * Using address 0x4000 for the IR read means that we - * use the same address as for CI version, which should - * be a safe default. - */ -#define DEBIADDR_IR 0x4000 -#define DEBIADDR_CICONTROL 0x0000 -#define DEBIADDR_CIVERSION 0x4000 -#define DEBIADDR_IO 0x1000 -#define DEBIADDR_ATTR 0x3000 - -#define CICONTROL_RESET 0x01 -#define CICONTROL_ENABLETS 0x02 -#define CICONTROL_CAMDETECT 0x08 - -#define DEBICICTL 0x00420000 -#define DEBICICAM 0x02420000 - -#define SLOTSTATUS_NONE 1 -#define SLOTSTATUS_PRESENT 2 -#define SLOTSTATUS_RESET 4 -#define SLOTSTATUS_READY 8 -#define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) - -/* RC5 device wildcard */ -#define IR_DEVICE_ANY 255 - -static int rc5_device = -1; -module_param(rc5_device, int, 0644); -MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)"); - -static int ir_debug; -module_param(ir_debug, int, 0644); -MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); - -DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); - -struct budget_ci_ir { - struct rc_dev *dev; - struct tasklet_struct msp430_irq_tasklet; - char name[72]; /* 40 + 32 for (struct saa7146_dev).name */ - char phys[32]; - int rc5_device; - u32 ir_key; - bool have_command; - bool full_rc5; /* Outputs a full RC5 code */ -}; - -struct budget_ci { - struct budget budget; - struct tasklet_struct ciintf_irq_tasklet; - int slot_status; - int ci_irq; - struct dvb_ca_en50221 ca; - struct budget_ci_ir ir; - u8 tuner_pll_address; /* used for philips_tdm1316l configs */ -}; - -static void msp430_ir_interrupt(unsigned long data) -{ - struct budget_ci *budget_ci = (struct budget_ci *) data; - struct rc_dev *dev = budget_ci->ir.dev; - u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; - - /* - * The msp430 chip can generate two different bytes, command and device - * - * type1: X1CCCCCC, C = command bits (0 - 63) - * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit - * - * Each signal from the remote control can generate one or more command - * bytes and one or more device bytes. For the repeated bytes, the - * highest bit (X) is set. The first command byte is always generated - * before the first device byte. Other than that, no specific order - * seems to apply. To make life interesting, bytes can also be lost. - * - * Only when we have a command and device byte, a keypress is - * generated. - */ - - if (ir_debug) - printk("budget_ci: received byte 0x%02x\n", command); - - /* Remove repeat bit, we use every command */ - command = command & 0x7f; - - /* Is this a RC5 command byte? */ - if (command & 0x40) { - budget_ci->ir.have_command = true; - budget_ci->ir.ir_key = command & 0x3f; - return; - } - - /* It's a RC5 device byte */ - if (!budget_ci->ir.have_command) - return; - budget_ci->ir.have_command = false; - - if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && - budget_ci->ir.rc5_device != (command & 0x1f)) - return; - - if (budget_ci->ir.full_rc5) { - rc_keydown(dev, - budget_ci->ir.rc5_device <<8 | budget_ci->ir.ir_key, - (command & 0x20) ? 1 : 0); - return; - } - - /* FIXME: We should generate complete scancodes for all devices */ - rc_keydown(dev, budget_ci->ir.ir_key, (command & 0x20) ? 1 : 0); -} - -static int msp430_ir_init(struct budget_ci *budget_ci) -{ - struct saa7146_dev *saa = budget_ci->budget.dev; - struct rc_dev *dev; - int error; - - dev = rc_allocate_device(); - if (!dev) { - printk(KERN_ERR "budget_ci: IR interface initialisation failed\n"); - return -ENOMEM; - } - - snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name), - "Budget-CI dvb ir receiver %s", saa->name); - snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys), - "pci-%s/ir0", pci_name(saa->pci)); - - dev->driver_name = MODULE_NAME; - dev->input_name = budget_ci->ir.name; - dev->input_phys = budget_ci->ir.phys; - dev->input_id.bustype = BUS_PCI; - dev->input_id.version = 1; - if (saa->pci->subsystem_vendor) { - dev->input_id.vendor = saa->pci->subsystem_vendor; - dev->input_id.product = saa->pci->subsystem_device; - } else { - dev->input_id.vendor = saa->pci->vendor; - dev->input_id.product = saa->pci->device; - } - dev->dev.parent = &saa->pci->dev; - - if (rc5_device < 0) - budget_ci->ir.rc5_device = IR_DEVICE_ANY; - else - budget_ci->ir.rc5_device = rc5_device; - - /* Select keymap and address */ - switch (budget_ci->budget.dev->pci->subsystem_device) { - case 0x100c: - case 0x100f: - case 0x1011: - case 0x1012: - /* The hauppauge keymap is a superset of these remotes */ - dev->map_name = RC_MAP_HAUPPAUGE; - budget_ci->ir.full_rc5 = true; - - if (rc5_device < 0) - budget_ci->ir.rc5_device = 0x1f; - break; - case 0x1010: - case 0x1017: - case 0x1019: - case 0x101a: - case 0x101b: - /* for the Technotrend 1500 bundled remote */ - dev->map_name = RC_MAP_TT_1500; - break; - default: - /* unknown remote */ - dev->map_name = RC_MAP_BUDGET_CI_OLD; - break; - } - if (!budget_ci->ir.full_rc5) - dev->scanmask = 0xff; - - error = rc_register_device(dev); - if (error) { - printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error); - rc_free_device(dev); - return error; - } - - budget_ci->ir.dev = dev; - - tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt, - (unsigned long) budget_ci); - - SAA7146_IER_ENABLE(saa, MASK_06); - saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); - - return 0; -} - -static void msp430_ir_deinit(struct budget_ci *budget_ci) -{ - struct saa7146_dev *saa = budget_ci->budget.dev; - - SAA7146_IER_DISABLE(saa, MASK_06); - saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); - tasklet_kill(&budget_ci->ir.msp430_irq_tasklet); - - rc_unregister_device(budget_ci->ir.dev); -} - -static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - - if (slot != 0) - return -EINVAL; - - return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, - DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0); -} - -static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - - if (slot != 0) - return -EINVAL; - - return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, - DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0); -} - -static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - - if (slot != 0) - return -EINVAL; - - return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, - DEBIADDR_IO | (address & 3), 1, 1, 0); -} - -static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - - if (slot != 0) - return -EINVAL; - - return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, - DEBIADDR_IO | (address & 3), 1, value, 1, 0); -} - -static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - struct saa7146_dev *saa = budget_ci->budget.dev; - - if (slot != 0) - return -EINVAL; - - if (budget_ci->ci_irq) { - // trigger on RISING edge during reset so we know when READY is re-asserted - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); - } - budget_ci->slot_status = SLOTSTATUS_RESET; - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); - msleep(1); - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, - CICONTROL_RESET, 1, 0); - - saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); - return 0; -} - -static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - struct saa7146_dev *saa = budget_ci->budget.dev; - - if (slot != 0) - return -EINVAL; - - saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); - return 0; -} - -static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - struct saa7146_dev *saa = budget_ci->budget.dev; - int tmp; - - if (slot != 0) - return -EINVAL; - - saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); - - tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, - tmp | CICONTROL_ENABLETS, 1, 0); - - ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); - return 0; -} - -static void ciintf_interrupt(unsigned long data) -{ - struct budget_ci *budget_ci = (struct budget_ci *) data; - struct saa7146_dev *saa = budget_ci->budget.dev; - unsigned int flags; - - // ensure we don't get spurious IRQs during initialisation - if (!budget_ci->budget.ci_present) - return; - - // read the CAM status - flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); - if (flags & CICONTROL_CAMDETECT) { - - // GPIO should be set to trigger on falling edge if a CAM is present - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); - - if (budget_ci->slot_status & SLOTSTATUS_NONE) { - // CAM insertion IRQ - budget_ci->slot_status = SLOTSTATUS_PRESENT; - dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, - DVB_CA_EN50221_CAMCHANGE_INSERTED); - - } else if (budget_ci->slot_status & SLOTSTATUS_RESET) { - // CAM ready (reset completed) - budget_ci->slot_status = SLOTSTATUS_READY; - dvb_ca_en50221_camready_irq(&budget_ci->ca, 0); - - } else if (budget_ci->slot_status & SLOTSTATUS_READY) { - // FR/DA IRQ - dvb_ca_en50221_frda_irq(&budget_ci->ca, 0); - } - } else { - - // trigger on rising edge if a CAM is not present - when a CAM is inserted, we - // only want to get the IRQ when it sets READY. If we trigger on the falling edge, - // the CAM might not actually be ready yet. - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); - - // generate a CAM removal IRQ if we haven't already - if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) { - // CAM removal IRQ - budget_ci->slot_status = SLOTSTATUS_NONE; - dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, - DVB_CA_EN50221_CAMCHANGE_REMOVED); - } - } -} - -static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) -{ - struct budget_ci *budget_ci = (struct budget_ci *) ca->data; - unsigned int flags; - - // ensure we don't get spurious IRQs during initialisation - if (!budget_ci->budget.ci_present) - return -EINVAL; - - // read the CAM status - flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); - if (flags & CICONTROL_CAMDETECT) { - // mark it as present if it wasn't before - if (budget_ci->slot_status & SLOTSTATUS_NONE) { - budget_ci->slot_status = SLOTSTATUS_PRESENT; - } - - // during a RESET, we check if we can read from IO memory to see when CAM is ready - if (budget_ci->slot_status & SLOTSTATUS_RESET) { - if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) { - budget_ci->slot_status = SLOTSTATUS_READY; - } - } - } else { - budget_ci->slot_status = SLOTSTATUS_NONE; - } - - if (budget_ci->slot_status != SLOTSTATUS_NONE) { - if (budget_ci->slot_status & SLOTSTATUS_READY) { - return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; - } - return DVB_CA_EN50221_POLL_CAM_PRESENT; - } - - return 0; -} - -static int ciintf_init(struct budget_ci *budget_ci) -{ - struct saa7146_dev *saa = budget_ci->budget.dev; - int flags; - int result; - int ci_version; - int ca_flags; - - memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221)); - - // enable DEBI pins - saa7146_write(saa, MC1, MASK_27 | MASK_11); - - // test if it is there - ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0); - if ((ci_version & 0xa0) != 0xa0) { - result = -ENODEV; - goto error; - } - - // determine whether a CAM is present or not - flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); - budget_ci->slot_status = SLOTSTATUS_NONE; - if (flags & CICONTROL_CAMDETECT) - budget_ci->slot_status = SLOTSTATUS_PRESENT; - - // version 0xa2 of the CI firmware doesn't generate interrupts - if (ci_version == 0xa2) { - ca_flags = 0; - budget_ci->ci_irq = 0; - } else { - ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | - DVB_CA_EN50221_FLAG_IRQ_FR | - DVB_CA_EN50221_FLAG_IRQ_DA; - budget_ci->ci_irq = 1; - } - - // register CI interface - budget_ci->ca.owner = THIS_MODULE; - budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem; - budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem; - budget_ci->ca.read_cam_control = ciintf_read_cam_control; - budget_ci->ca.write_cam_control = ciintf_write_cam_control; - budget_ci->ca.slot_reset = ciintf_slot_reset; - budget_ci->ca.slot_shutdown = ciintf_slot_shutdown; - budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable; - budget_ci->ca.poll_slot_status = ciintf_poll_slot_status; - budget_ci->ca.data = budget_ci; - if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter, - &budget_ci->ca, - ca_flags, 1)) != 0) { - printk("budget_ci: CI interface detected, but initialisation failed.\n"); - goto error; - } - - // Setup CI slot IRQ - if (budget_ci->ci_irq) { - tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci); - if (budget_ci->slot_status != SLOTSTATUS_NONE) { - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); - } else { - saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); - } - SAA7146_IER_ENABLE(saa, MASK_03); - } - - // enable interface - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, - CICONTROL_RESET, 1, 0); - - // success! - printk("budget_ci: CI interface initialised\n"); - budget_ci->budget.ci_present = 1; - - // forge a fake CI IRQ so the CAM state is setup correctly - if (budget_ci->ci_irq) { - flags = DVB_CA_EN50221_CAMCHANGE_REMOVED; - if (budget_ci->slot_status != SLOTSTATUS_NONE) - flags = DVB_CA_EN50221_CAMCHANGE_INSERTED; - dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags); - } - - return 0; - -error: - saa7146_write(saa, MC1, MASK_27); - return result; -} - -static void ciintf_deinit(struct budget_ci *budget_ci) -{ - struct saa7146_dev *saa = budget_ci->budget.dev; - - // disable CI interrupts - if (budget_ci->ci_irq) { - SAA7146_IER_DISABLE(saa, MASK_03); - saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); - tasklet_kill(&budget_ci->ciintf_irq_tasklet); - } - - // reset interface - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); - msleep(1); - ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, - CICONTROL_RESET, 1, 0); - - // disable TS data stream to CI interface - saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); - - // release the CA device - dvb_ca_en50221_release(&budget_ci->ca); - - // disable DEBI pins - saa7146_write(saa, MC1, MASK_27); -} - -static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr) -{ - struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; - - dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci); - - if (*isr & MASK_06) - tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet); - - if (*isr & MASK_10) - ttpci_budget_irq10_handler(dev, isr); - - if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq)) - tasklet_schedule(&budget_ci->ciintf_irq_tasklet); -} - -static u8 philips_su1278_tt_inittab[] = { - 0x01, 0x0f, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x5b, - 0x05, 0x85, - 0x06, 0x02, - 0x07, 0x00, - 0x08, 0x02, - 0x09, 0x00, - 0x0C, 0x01, - 0x0D, 0x81, - 0x0E, 0x44, - 0x0f, 0x14, - 0x10, 0x3c, - 0x11, 0x84, - 0x12, 0xda, - 0x13, 0x97, - 0x14, 0x95, - 0x15, 0xc9, - 0x16, 0x19, - 0x17, 0x8c, - 0x18, 0x59, - 0x19, 0xf8, - 0x1a, 0xfe, - 0x1c, 0x7f, - 0x1d, 0x00, - 0x1e, 0x00, - 0x1f, 0x50, - 0x20, 0x00, - 0x21, 0x00, - 0x22, 0x00, - 0x23, 0x00, - 0x28, 0x00, - 0x29, 0x28, - 0x2a, 0x14, - 0x2b, 0x0f, - 0x2c, 0x09, - 0x2d, 0x09, - 0x31, 0x1f, - 0x32, 0x19, - 0x33, 0xfc, - 0x34, 0x93, - 0xff, 0xff -}; - -static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) -{ - stv0299_writereg(fe, 0x0e, 0x44); - if (srate >= 10000000) { - stv0299_writereg(fe, 0x13, 0x97); - stv0299_writereg(fe, 0x14, 0x95); - stv0299_writereg(fe, 0x15, 0xc9); - stv0299_writereg(fe, 0x17, 0x8c); - stv0299_writereg(fe, 0x1a, 0xfe); - stv0299_writereg(fe, 0x1c, 0x7f); - stv0299_writereg(fe, 0x2d, 0x09); - } else { - stv0299_writereg(fe, 0x13, 0x99); - stv0299_writereg(fe, 0x14, 0x8d); - stv0299_writereg(fe, 0x15, 0xce); - stv0299_writereg(fe, 0x17, 0x43); - stv0299_writereg(fe, 0x1a, 0x1d); - stv0299_writereg(fe, 0x1c, 0x12); - stv0299_writereg(fe, 0x2d, 0x05); - } - stv0299_writereg(fe, 0x0e, 0x23); - stv0299_writereg(fe, 0x0f, 0x94); - stv0299_writereg(fe, 0x10, 0x39); - stv0299_writereg(fe, 0x15, 0xc9); - - stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg(fe, 0x21, (ratio) & 0xf0); - - return 0; -} - -static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - u32 div; - u8 buf[4]; - struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; - - if ((p->frequency < 950000) || (p->frequency > 2150000)) - return -EINVAL; - - div = (p->frequency + (500 - 1)) / 500; /* round correctly */ - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2; - buf[3] = 0x20; - - if (p->symbol_rate < 4000000) - buf[3] |= 1; - - if (p->frequency < 1250000) - buf[3] |= 0; - else if (p->frequency < 1550000) - buf[3] |= 0x40; - else if (p->frequency < 2050000) - buf[3] |= 0x80; - else if (p->frequency < 2150000) - buf[3] |= 0xC0; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1) - return -EIO; - return 0; -} - -static struct stv0299_config philips_su1278_tt_config = { - - .demod_address = 0x68, - .inittab = philips_su1278_tt_inittab, - .mclk = 64000000UL, - .invert = 0, - .skip_reinit = 1, - .lock_output = STV0299_LOCKOUTPUT_1, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 50, - .set_symbol_rate = philips_su1278_tt_set_symbol_rate, -}; - - - -static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe) -{ - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; - static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; - struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len = - sizeof(td1316_init) }; - - // setup PLL configuration - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - msleep(1); - - // disable the mc44BC374c (do not check for errors) - tuner_msg.addr = 0x65; - tuner_msg.buf = disable_mc44BC374c; - tuner_msg.len = sizeof(disable_mc44BC374c); - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) { - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1); - } - - return 0; -} - -static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - u8 tuner_buf[4]; - struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = p->frequency + 36130000; - if (tuner_frequency < 87000000) - return -EINVAL; - else if (tuner_frequency < 130000000) - cp = 3; - else if (tuner_frequency < 160000000) - cp = 5; - else if (tuner_frequency < 200000000) - cp = 6; - else if (tuner_frequency < 290000000) - cp = 3; - else if (tuner_frequency < 420000000) - cp = 5; - else if (tuner_frequency < 480000000) - cp = 6; - else if (tuner_frequency < 620000000) - cp = 3; - else if (tuner_frequency < 830000000) - cp = 5; - else if (tuner_frequency < 895000000) - cp = 7; - else - return -EINVAL; - - // determine band - if (p->frequency < 49000000) - return -EINVAL; - else if (p->frequency < 159000000) - band = 1; - else if (p->frequency < 444000000) - band = 2; - else if (p->frequency < 861000000) - band = 4; - else - return -EINVAL; - - // setup PLL filter and TDA9889 - switch (p->bandwidth_hz) { - case 6000000: - tda1004x_writereg(fe, 0x0C, 0x14); - filter = 0; - break; - - case 7000000: - tda1004x_writereg(fe, 0x0C, 0x80); - filter = 0; - break; - - case 8000000: - tda1004x_writereg(fe, 0x0C, 0x14); - filter = 1; - break; - - default: - return -EINVAL; - } - - // calculate divisor - // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) - tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; - - // setup tuner buffer - tuner_buf[0] = tuner_frequency >> 8; - tuner_buf[1] = tuner_frequency & 0xff; - tuner_buf[2] = 0xca; - tuner_buf[3] = (cp << 5) | (filter << 3) | band; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - - msleep(1); - return 0; -} - -static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe, - const struct firmware **fw, char *name) -{ - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - - return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev); -} - -static struct tda1004x_config philips_tdm1316l_config = { - - .demod_address = 0x8, - .invert = 0, - .invert_oclk = 0, - .xtal_freq = TDA10046_XTAL_4M, - .agc_config = TDA10046_AGC_DEFAULT, - .if_freq = TDA10046_FREQ_3617, - .request_firmware = philips_tdm1316l_request_firmware, -}; - -static struct tda1004x_config philips_tdm1316l_config_invert = { - - .demod_address = 0x8, - .invert = 1, - .invert_oclk = 0, - .xtal_freq = TDA10046_XTAL_4M, - .agc_config = TDA10046_AGC_DEFAULT, - .if_freq = TDA10046_FREQ_3617, - .request_firmware = philips_tdm1316l_request_firmware, -}; - -static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) -{ - struct dtv_frontend_properties *p = &fe->dtv_property_cache; - struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; - u8 tuner_buf[5]; - struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, - .flags = 0, - .buf = tuner_buf, - .len = sizeof(tuner_buf) }; - int tuner_frequency = 0; - u8 band, cp, filter; - - // determine charge pump - tuner_frequency = p->frequency + 36125000; - if (tuner_frequency < 87000000) - return -EINVAL; - else if (tuner_frequency < 130000000) { - cp = 3; - band = 1; - } else if (tuner_frequency < 160000000) { - cp = 5; - band = 1; - } else if (tuner_frequency < 200000000) { - cp = 6; - band = 1; - } else if (tuner_frequency < 290000000) { - cp = 3; - band = 2; - } else if (tuner_frequency < 420000000) { - cp = 5; - band = 2; - } else if (tuner_frequency < 480000000) { - cp = 6; - band = 2; - } else if (tuner_frequency < 620000000) { - cp = 3; - band = 4; - } else if (tuner_frequency < 830000000) { - cp = 5; - band = 4; - } else if (tuner_frequency < 895000000) { - cp = 7; - band = 4; - } else - return -EINVAL; - - // assume PLL filter should always be 8MHz for the moment. - filter = 1; - - // calculate divisor - tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500; - - // setup tuner buffer - tuner_buf[0] = tuner_frequency >> 8; - tuner_buf[1] = tuner_frequency & 0xff; - tuner_buf[2] = 0xc8; - tuner_buf[3] = (cp << 5) | (filter << 3) | band; - tuner_buf[4] = 0x80; - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - - msleep(50); - - if (fe->ops.i2c_gate_ctrl) - fe->ops.i2c_gate_ctrl(fe, 1); - if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) - return -EIO; - - msleep(1); - - return 0; -} - -static u8 dvbc_philips_tdm1316l_inittab[] = { - 0x80, 0x01, - 0x80, 0x00, - 0x81, 0x01, - 0x81, 0x00, - 0x00, 0x09, - 0x01, 0x69, - 0x03, 0x00, - 0x04, 0x00, - 0x07, 0x00, - 0x08, 0x00, - 0x20, 0x00, - 0x21, 0x40, - 0x22, 0x00, - 0x23, 0x00, - 0x24, 0x40, - 0x25, 0x88, - 0x30, 0xff, - 0x31, 0x00, - 0x32, 0xff, - 0x33, 0x00, - 0x34, 0x50, - 0x35, 0x7f, - 0x36, 0x00, - 0x37, 0x20, - 0x38, 0x00, - 0x40, 0x1c, - 0x41, 0xff, - 0x42, 0x29, - 0x43, 0x20, - 0x44, 0xff, - 0x45, 0x00, - 0x46, 0x00, - 0x49, 0x04, - 0x4a, 0x00, - 0x4b, 0x7b, - 0x52, 0x30, - 0x55, 0xae, - 0x56, 0x47, - 0x57, 0xe1, - 0x58, 0x3a, - 0x5a, 0x1e, - 0x5b, 0x34, - 0x60, 0x00, - 0x63, 0x00, - 0x64, 0x00, - 0x65, 0x00, - 0x66, 0x00, - 0x67, 0x00, - 0x68, 0x00, - 0x69, 0x00, - 0x6a, 0x02, - 0x6b, 0x00, - 0x70, 0xff, - 0x71, 0x00, - 0x72, 0x00, - 0x73, 0x00, - 0x74, 0x0c, - 0x80, 0x00, - 0x81, 0x00, - 0x82, 0x00, - 0x83, 0x00, - 0x84, 0x04, - 0x85, 0x80, - 0x86, 0x24, - 0x87, 0x78, - 0x88, 0x10, - 0x89, 0x00, - 0x90, 0x01, - 0x91, 0x01, - 0xa0, 0x04, - 0xa1, 0x00, - 0xa2, 0x00, - 0xb0, 0x91, - 0xb1, 0x0b, - 0xc0, 0x53, - 0xc1, 0x70, - 0xc2, 0x12, - 0xd0, 0x00, - 0xd1, 0x00, - 0xd2, 0x00, - 0xd3, 0x00, - 0xd4, 0x00, - 0xd5, 0x00, - 0xde, 0x00, - 0xdf, 0x00, - 0x61, 0x38, - 0x62, 0x0a, - 0x53, 0x13, - 0x59, 0x08, - 0xff, 0xff, -}; - -static struct stv0297_config dvbc_philips_tdm1316l_config = { - .demod_address = 0x1c, - .inittab = dvbc_philips_tdm1316l_inittab, - .invert = 0, - .stop_during_read = 1, -}; - -static struct tda10023_config tda10023_config = { - .demod_address = 0xc, - .invert = 0, - .xtal = 16000000, - .pll_m = 11, - .pll_p = 3, - .pll_n = 1, - .deltaf = 0xa511, -}; - -static struct tda827x_config tda827x_config = { - .config = 0, -}; - -/* TT S2-3200 DVB-S (STB0899) Inittab */ -static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = { - - { STB0899_DEV_ID , 0x81 }, - { STB0899_DISCNTRL1 , 0x32 }, - { STB0899_DISCNTRL2 , 0x80 }, - { STB0899_DISRX_ST0 , 0x04 }, - { STB0899_DISRX_ST1 , 0x00 }, - { STB0899_DISPARITY , 0x00 }, - { STB0899_DISSTATUS , 0x20 }, - { STB0899_DISF22 , 0x8c }, - { STB0899_DISF22RX , 0x9a }, - { STB0899_SYSREG , 0x0b }, - { STB0899_ACRPRESC , 0x11 }, - { STB0899_ACRDIV1 , 0x0a }, - { STB0899_ACRDIV2 , 0x05 }, - { STB0899_DACR1 , 0x00 }, - { STB0899_DACR2 , 0x00 }, - { STB0899_OUTCFG , 0x00 }, - { STB0899_MODECFG , 0x00 }, - { STB0899_IRQSTATUS_3 , 0x30 }, - { STB0899_IRQSTATUS_2 , 0x00 }, - { STB0899_IRQSTATUS_1 , 0x00 }, - { STB0899_IRQSTATUS_0 , 0x00 }, - { STB0899_IRQMSK_3 , 0xf3 }, - { STB0899_IRQMSK_2 , 0xfc }, - { STB0899_IRQMSK_1 , 0xff }, - { STB0899_IRQMSK_0 , 0xff }, - { STB0899_IRQCFG , 0x00 }, - { STB0899_I2CCFG , 0x88 }, - { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */ - { STB0899_IOPVALUE5 , 0x00 }, - { STB0899_IOPVALUE4 , 0x20 }, - { STB0899_IOPVALUE3 , 0xc9 }, - { STB0899_IOPVALUE2 , 0x90 }, - { STB0899_IOPVALUE1 , 0x40 }, - { STB0899_IOPVALUE0 , 0x00 }, - { STB0899_GPIO00CFG , 0x82 }, - { STB0899_GPIO01CFG , 0x82 }, - { STB0899_GPIO02CFG , 0x82 }, - { STB0899_GPIO03CFG , 0x82 }, - { STB0899_GPIO04CFG , 0x82 }, - { STB0899_GPIO05CFG , 0x82 }, - { STB0899_GPIO06CFG , 0x82 }, - { STB0899_GPIO07CFG , 0x82 }, - { STB0899_GPIO08CFG , 0x82 }, - { STB0899_GPIO09CFG , 0x82 }, - { STB0899_GPIO10CFG , 0x82 }, - { STB0899_GPIO11CFG , 0x82 }, - { STB0899_GPIO12CFG , 0x82 }, - { STB0899_GPIO13CFG , 0x82 }, - { STB0899_GPIO14CFG , 0x82 }, - { STB0899_GPIO15CFG , 0x82 }, - { STB0899_GPIO16CFG , 0x82 }, - { STB0899_GPIO17CFG , 0x82 }, - { STB0899_GPIO18CFG , 0x82 }, - { STB0899_GPIO19CFG , 0x82 }, - { STB0899_GPIO20CFG , 0x82 }, - { STB0899_SDATCFG , 0xb8 }, - { STB0899_SCLTCFG , 0xba }, - { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ - { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ - { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ - { STB0899_DIRCLKCFG , 0x82 }, - { STB0899_CLKOUT27CFG , 0x7e }, - { STB0899_STDBYCFG , 0x82 }, - { STB0899_CS0CFG , 0x82 }, - { STB0899_CS1CFG , 0x82 }, - { STB0899_DISEQCOCFG , 0x20 }, - { STB0899_GPIO32CFG , 0x82 }, - { STB0899_GPIO33CFG , 0x82 }, - { STB0899_GPIO34CFG , 0x82 }, - { STB0899_GPIO35CFG , 0x82 }, - { STB0899_GPIO36CFG , 0x82 }, - { STB0899_GPIO37CFG , 0x82 }, - { STB0899_GPIO38CFG , 0x82 }, - { STB0899_GPIO39CFG , 0x82 }, - { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ - { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ - { STB0899_FILTCTRL , 0x00 }, - { STB0899_SYSCTRL , 0x00 }, - { STB0899_STOPCLK1 , 0x20 }, - { STB0899_STOPCLK2 , 0x00 }, - { STB0899_INTBUFSTATUS , 0x00 }, - { STB0899_INTBUFCTRL , 0x0a }, - { 0xffff , 0xff }, -}; - -static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = { - { STB0899_DEMOD , 0x00 }, - { STB0899_RCOMPC , 0xc9 }, - { STB0899_AGC1CN , 0x41 }, - { STB0899_AGC1REF , 0x10 }, - { STB0899_RTC , 0x7a }, - { STB0899_TMGCFG , 0x4e }, - { STB0899_AGC2REF , 0x34 }, - { STB0899_TLSR , 0x84 }, - { STB0899_CFD , 0xc7 }, - { STB0899_ACLC , 0x87 }, - { STB0899_BCLC , 0x94 }, - { STB0899_EQON , 0x41 }, - { STB0899_LDT , 0xdd }, - { STB0899_LDT2 , 0xc9 }, - { STB0899_EQUALREF , 0xb4 }, - { STB0899_TMGRAMP , 0x10 }, - { STB0899_TMGTHD , 0x30 }, - { STB0899_IDCCOMP , 0xfb }, - { STB0899_QDCCOMP , 0x03 }, - { STB0899_POWERI , 0x3b }, - { STB0899_POWERQ , 0x3d }, - { STB0899_RCOMP , 0x81 }, - { STB0899_AGCIQIN , 0x80 }, - { STB0899_AGC2I1 , 0x04 }, - { STB0899_AGC2I2 , 0xf5 }, - { STB0899_TLIR , 0x25 }, - { STB0899_RTF , 0x80 }, - { STB0899_DSTATUS , 0x00 }, - { STB0899_LDI , 0xca }, - { STB0899_CFRM , 0xf1 }, - { STB0899_CFRL , 0xf3 }, - { STB0899_NIRM , 0x2a }, - { STB0899_NIRL , 0x05 }, - { STB0899_ISYMB , 0x17 }, - { STB0899_QSYMB , 0xfa }, - { STB0899_SFRH , 0x2f }, - { STB0899_SFRM , 0x68 }, - { STB0899_SFRL , 0x40 }, - { STB0899_SFRUPH , 0x2f }, - { STB0899_SFRUPM , 0x68 }, - { STB0899_SFRUPL , 0x40 }, - { STB0899_EQUAI1 , 0xfd }, - { STB0899_EQUAQ1 , 0x04 }, - { STB0899_EQUAI2 , 0x0f }, - { STB0899_EQUAQ2 , 0xff }, - { STB0899_EQUAI3 , 0xdf }, - { STB0899_EQUAQ3 , 0xfa }, - { STB0899_EQUAI4 , 0x37 }, - { STB0899_EQUAQ4 , 0x0d }, - { STB0899_EQUAI5 , 0xbd }, - { STB0899_EQUAQ5 , 0xf7 }, - { STB0899_DSTATUS2 , 0x00 }, - { STB0899_VSTATUS , 0x00 }, - { STB0899_VERROR , 0xff }, - { STB0899_IQSWAP , 0x2a }, - { STB0899_ECNT1M , 0x00 }, - { STB0899_ECNT1L , 0x00 }, - { STB0899_ECNT2M , 0x00 }, - { STB0899_ECNT2L , 0x00 }, - { STB0899_ECNT3M , 0x00 }, - { STB0899_ECNT3L , 0x00 }, - { STB0899_FECAUTO1 , 0x06 }, - { STB0899_FECM , 0x01 }, - { STB0899_VTH12 , 0xf0 }, - { STB0899_VTH23 , 0xa0 }, - { STB0899_VTH34 , 0x78 }, - { STB0899_VTH56 , 0x4e }, - { STB0899_VTH67 , 0x48 }, - { STB0899_VTH78 , 0x38 }, - { STB0899_PRVIT , 0xff }, - { STB0899_VITSYNC , 0x19 }, - { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ - { STB0899_TSULC , 0x42 }, - { STB0899_RSLLC , 0x40 }, - { STB0899_TSLPL , 0x12 }, - { STB0899_TSCFGH , 0x0c }, - { STB0899_TSCFGM , 0x00 }, - { STB0899_TSCFGL , 0x0c }, - { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ - { STB0899_RSSYNCDEL , 0x00 }, - { STB0899_TSINHDELH , 0x02 }, - { STB0899_TSINHDELM , 0x00 }, - { STB0899_TSINHDELL , 0x00 }, - { STB0899_TSLLSTKM , 0x00 }, - { STB0899_TSLLSTKL , 0x00 }, - { STB0899_TSULSTKM , 0x00 }, - { STB0899_TSULSTKL , 0xab }, - { STB0899_PCKLENUL , 0x00 }, - { STB0899_PCKLENLL , 0xcc }, - { STB0899_RSPCKLEN , 0xcc }, - { STB0899_TSSTATUS , 0x80 }, - { STB0899_ERRCTRL1 , 0xb6 }, - { STB0899_ERRCTRL2 , 0x96 }, - { STB0899_ERRCTRL3 , 0x89 }, - { STB0899_DMONMSK1 , 0x27 }, - { STB0899_DMONMSK0 , 0x03 }, - { STB0899_DEMAPVIT , 0x5c }, - { STB0899_PLPARM , 0x1f }, - { STB0899_PDELCTRL , 0x48 }, - { STB0899_PDELCTRL2 , 0x00 }, - { STB0899_BBHCTRL1 , 0x00 }, - { STB0899_BBHCTRL2 , 0x00 }, - { STB0899_HYSTTHRESH , 0x77 }, - { STB0899_MATCSTM , 0x00 }, - { STB0899_MATCSTL , 0x00 }, - { STB0899_UPLCSTM , 0x00 }, - { STB0899_UPLCSTL , 0x00 }, - { STB0899_DFLCSTM , 0x00 }, - { STB0899_DFLCSTL , 0x00 }, - { STB0899_SYNCCST , 0x00 }, - { STB0899_SYNCDCSTM , 0x00 }, - { STB0899_SYNCDCSTL , 0x00 }, - { STB0899_ISI_ENTRY , 0x00 }, - { STB0899_ISI_BIT_EN , 0x00 }, - { STB0899_MATSTRM , 0x00 }, - { STB0899_MATSTRL , 0x00 }, - { STB0899_UPLSTRM , 0x00 }, - { STB0899_UPLSTRL , 0x00 }, - { STB0899_DFLSTRM , 0x00 }, - { STB0899_DFLSTRL , 0x00 }, - { STB0899_SYNCSTR , 0x00 }, - { STB0899_SYNCDSTRM , 0x00 }, - { STB0899_SYNCDSTRL , 0x00 }, - { STB0899_CFGPDELSTATUS1 , 0x10 }, - { STB0899_CFGPDELSTATUS2 , 0x00 }, - { STB0899_BBFERRORM , 0x00 }, - { STB0899_BBFERRORL , 0x00 }, - { STB0899_UPKTERRORM , 0x00 }, - { STB0899_UPKTERRORL , 0x00 }, - { 0xffff , 0xff }, -}; - -static struct stb0899_config tt3200_config = { - .init_dev = tt3200_stb0899_s1_init_1, - .init_s2_demod = stb0899_s2_init_2, - .init_s1_demod = tt3200_stb0899_s1_init_3, - .init_s2_fec = stb0899_s2_init_4, - .init_tst = stb0899_s1_init_5, - - .postproc = NULL, - - .demod_address = 0x68, - - .xtal_freq = 27000000, - .inversion = IQ_SWAP_ON, /* 1 */ - - .lo_clk = 76500000, - .hi_clk = 99000000, - - .esno_ave = STB0899_DVBS2_ESNO_AVE, - .esno_quant = STB0899_DVBS2_ESNO_QUANT, - .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, - .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, - .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, - .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, - .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, - .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, - .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, - - .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, - .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, - .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, - .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, - - .tuner_get_frequency = stb6100_get_frequency, - .tuner_set_frequency = stb6100_set_frequency, - .tuner_set_bandwidth = stb6100_set_bandwidth, - .tuner_get_bandwidth = stb6100_get_bandwidth, - .tuner_set_rfsiggain = NULL -}; - -static struct stb6100_config tt3200_stb6100_config = { - .tuner_address = 0x60, - .refclock = 27000000, -}; - -static void frontend_init(struct budget_ci *budget_ci) -{ - switch (budget_ci->budget.dev->pci->subsystem_device) { - case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059)) - budget_ci->budget.dvb_frontend = - dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; - budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; - break; - } - break; - - case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059)) - budget_ci->budget.dvb_frontend = - dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params; - break; - } - break; - - case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt)) - budget_ci->tuner_pll_address = 0x61; - budget_ci->budget.dvb_frontend = - dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; - break; - } - break; - - case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) - budget_ci->tuner_pll_address = 0x63; - budget_ci->budget.dvb_frontend = - dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; - break; - } - break; - - case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt)) - budget_ci->tuner_pll_address = 0x60; - budget_ci->budget.dvb_frontend = - dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; - break; - } - break; - - case 0x1017: // TT S-1500 PCI - budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; - budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; - - budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; - if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { - printk("%s: No LNBP21 found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } - break; - - case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */ - budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48); - if (budget_ci->budget.dvb_frontend) { - if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) { - printk(KERN_ERR "%s: No tda827x found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } - break; - - case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */ - budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) { - if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { - printk(KERN_ERR "%s: No LNBP21 found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } else { - printk(KERN_ERR "%s: No STB6000 found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } - break; - - case 0x1019: // TT S2-3200 PCI - /* - * NOTE! on some STB0899 versions, the internal PLL takes a longer time - * to settle, aka LOCK. On the older revisions of the chip, we don't see - * this, as a result on the newer chips the entire clock tree, will not - * be stable after a freshly POWER 'ed up situation. - * In this case, we should RESET the STB0899 (Active LOW) and wait for - * PLL stabilization. - * - * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is - * connected to the SAA7146 GPIO, GPIO2, Pin 142 - */ - /* Reset Demodulator */ - saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO); - /* Wait for everything to die */ - msleep(50); - /* Pull it up out of Reset state */ - saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI); - /* Wait for PLL to stabilize */ - msleep(250); - /* - * PLL state should be stable now. Ideally, we should check - * for PLL LOCK status. But well, never mind! - */ - budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap); - if (budget_ci->budget.dvb_frontend) { - if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) { - if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { - printk("%s: No LNBP21 found!\n", __func__); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } else { - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } - break; - - } - - if (budget_ci->budget.dvb_frontend == NULL) { - printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", - budget_ci->budget.dev->pci->vendor, - budget_ci->budget.dev->pci->device, - budget_ci->budget.dev->pci->subsystem_vendor, - budget_ci->budget.dev->pci->subsystem_device); - } else { - if (dvb_register_frontend - (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { - printk("budget-ci: Frontend registration failed!\n"); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - budget_ci->budget.dvb_frontend = NULL; - } - } -} - -static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) -{ - struct budget_ci *budget_ci; - int err; - - budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL); - if (!budget_ci) { - err = -ENOMEM; - goto out1; - } - - dprintk(2, "budget_ci: %p\n", budget_ci); - - dev->ext_priv = budget_ci; - - err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, - adapter_nr); - if (err) - goto out2; - - err = msp430_ir_init(budget_ci); - if (err) - goto out3; - - ciintf_init(budget_ci); - - budget_ci->budget.dvb_adapter.priv = budget_ci; - frontend_init(budget_ci); - - ttpci_budget_init_hooks(&budget_ci->budget); - - return 0; - -out3: - ttpci_budget_deinit(&budget_ci->budget); -out2: - kfree(budget_ci); -out1: - return err; -} - -static int budget_ci_detach(struct saa7146_dev *dev) -{ - struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; - struct saa7146_dev *saa = budget_ci->budget.dev; - int err; - - if (budget_ci->budget.ci_present) - ciintf_deinit(budget_ci); - msp430_ir_deinit(budget_ci); - if (budget_ci->budget.dvb_frontend) { - dvb_unregister_frontend(budget_ci->budget.dvb_frontend); - dvb_frontend_detach(budget_ci->budget.dvb_frontend); - } - err = ttpci_budget_deinit(&budget_ci->budget); - - // disable frontend and CI interface - saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); - - kfree(budget_ci); - - return err; -} - -static struct saa7146_extension budget_extension; - -MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC); -MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT); -MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT); - -static struct pci_device_id pci_tbl[] = { - MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c), - MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f), - MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010), - MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011), - MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012), - MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), - MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a), - MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019), - MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b), - { - .vendor = 0, - } -}; - -MODULE_DEVICE_TABLE(pci, pci_tbl); - -static struct saa7146_extension budget_extension = { - .name = "budget_ci dvb", - .flags = SAA7146_USE_I2C_IRQ, - - .module = THIS_MODULE, - .pci_tbl = &pci_tbl[0], - .attach = budget_ci_attach, - .detach = budget_ci_detach, - - .irq_mask = MASK_03 | MASK_06 | MASK_10, - .irq_func = budget_ci_irq, -}; - -static int __init budget_ci_init(void) -{ - return saa7146_register_extension(&budget_extension); -} - -static void __exit budget_ci_exit(void) -{ - saa7146_unregister_extension(&budget_extension); -} - -module_init(budget_ci_init); -module_exit(budget_ci_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others"); -MODULE_DESCRIPTION("driver for the SAA7146 based so-called " - "budget PCI DVB cards w/ CI-module produced by " - "Siemens, Technotrend, Hauppauge"); |