summaryrefslogtreecommitdiff
path: root/drivers/media/radio/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/radio/Kconfig')
-rw-r--r--drivers/media/radio/Kconfig354
1 files changed, 354 insertions, 0 deletions
diff --git a/drivers/media/radio/Kconfig b/drivers/media/radio/Kconfig
new file mode 100644
index 000000000000..d318be383de6
--- /dev/null
+++ b/drivers/media/radio/Kconfig
@@ -0,0 +1,354 @@
+#
+# Multimedia Video device configuration
+#
+
+menu "Radio Adapters"
+ depends on VIDEO_DEV!=n
+
+config RADIO_CADET
+ tristate "ADS Cadet AM/FM Tuner"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have one of these AM/FM radio cards, and then
+ fill in the port address below.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ Further documentation on this driver can be found on the WWW at
+ <http://linux.blackhawke.net/cadet/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-cadet.
+
+config RADIO_RTRACK
+ tristate "AIMSlab RadioTrack (aka RadioReveal) support"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address below.
+
+ Note that newer AIMSlab RadioTrack cards have a different chipset
+ and are not supported by this driver. For these cards, use the
+ RadioTrack II driver below.
+
+ If you have a GemTeks combined (PnP) sound- and radio card you must
+ use this driver as a module and setup the card with isapnptools.
+ You must also pass the module a suitable io parameter, 0x248 has
+ been reported to be used by these cards.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>. More information is
+ contained in the file
+ <file:Documentation/video4linux/radiotrack.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-aimslab.
+
+config RADIO_RTRACK_PORT
+ hex "RadioTrack i/o port (0x20f or 0x30f)"
+ depends on RADIO_RTRACK=y
+ default "20f"
+ help
+ Enter either 0x30f or 0x20f here. The card default is 0x30f, if you
+ haven't changed the jumper setting on the card.
+
+config RADIO_RTRACK2
+ tristate "AIMSlab RadioTrack II support"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have this FM radio card, and then fill in the
+ port address below.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-rtrack2.
+
+config RADIO_RTRACK2_PORT
+ hex "RadioTrack II i/o port (0x20c or 0x30c)"
+ depends on RADIO_RTRACK2=y
+ default "30c"
+ help
+ Enter either 0x30c or 0x20c here. The card default is 0x30c, if you
+ haven't changed the jumper setting on the card.
+
+config RADIO_AZTECH
+ tristate "Aztech/Packard Bell Radio"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address below.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-aztech.
+
+config RADIO_AZTECH_PORT
+ hex "Aztech/Packard Bell I/O port (0x350 or 0x358)"
+ depends on RADIO_AZTECH=y
+ default "350"
+ help
+ Enter either 0x350 or 0x358 here. The card default is 0x350, if you
+ haven't changed the setting of jumper JP3 on the card. Removing the
+ jumper sets the card to 0x358.
+
+config RADIO_GEMTEK
+ tristate "GemTek Radio Card support"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have this FM radio card, and then fill in the
+ port address below.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-gemtek.
+
+config RADIO_GEMTEK_PORT
+ hex "GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)"
+ depends on RADIO_GEMTEK=y
+ default "34c"
+ help
+ Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is
+ 0x34c, if you haven't changed the jumper setting on the card. On
+ Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
+ port is 0x28c.
+
+config RADIO_GEMTEK_PCI
+ tristate "GemTek PCI Radio Card support"
+ depends on VIDEO_DEV && PCI
+ ---help---
+ Choose Y here if you have this PCI FM radio card.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video for Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-gemtek-pci.
+
+config RADIO_MAXIRADIO
+ tristate "Guillemot MAXI Radio FM 2000 radio"
+ depends on VIDEO_DEV && PCI
+ ---help---
+ Choose Y here if you have this radio card. This card may also be
+ found as Gemtek PCI FM.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-maxiradio.
+
+config RADIO_MAESTRO
+ tristate "Maestro on board radio"
+ depends on VIDEO_DEV
+ ---help---
+ Say Y here to directly support the on-board radio tuner on the
+ Maestro 2 or 2E sound card.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-maestro.
+
+config RADIO_MIROPCM20
+ tristate "miroSOUND PCM20 radio"
+ depends on ISA && VIDEO_DEV && SOUND_ACI_MIXER
+ ---help---
+ Choose Y here if you have this FM radio card. You also need to say Y
+ to "ACI mixer (miroSOUND PCM1-pro/PCM12/PCM20 radio)" (in "Sound")
+ for this to work.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called miropcm20.
+
+config RADIO_MIROPCM20_RDS
+ tristate "miroSOUND PCM20 radio RDS user interface (EXPERIMENTAL)"
+ depends on RADIO_MIROPCM20 && EXPERIMENTAL
+ ---help---
+ Choose Y here if you want to see RDS/RBDS information like
+ RadioText, Programme Service name, Clock Time and date, Programme
+ TYpe and Traffic Announcement/Programme identification. You also
+ need to say Y to "miroSOUND PCM20 radio" and devfs!
+
+ It's not possible to read the raw RDS packets from the device, so
+ the driver cant provide an V4L interface for this. But the
+ availability of RDS is reported over V4L by the basic driver
+ already. Here RDS can be read from files in /dev/v4l/rds.
+
+ To compile this driver as a module, choose M here: the
+ module will be called miropcm20-rds.
+
+config RADIO_SF16FMI
+ tristate "SF16FMI Radio"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have one of these FM radio cards. If you
+ compile the driver into the kernel and your card is not PnP one, you
+ have to add "sf16fm=<io>" to the kernel command line (I/O address is
+ 0x284 or 0x384).
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-sf16fmi.
+
+config RADIO_SF16FMR2
+ tristate "SF16FMR2 Radio"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have one of these FM radio cards.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found on the WWW at
+ <http://roadrunner.swansea.uk.linux.org/v4l.shtml>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-sf16fmr2.
+
+config RADIO_TERRATEC
+ tristate "TerraTec ActiveRadio ISA Standalone"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have this FM radio card, and then fill in the
+ port address below. (TODO)
+
+ Note: This driver is in its early stages. Right now volume and
+ frequency control and muting works at least for me, but
+ unfortunately I have not found anybody who wants to use this card
+ with Linux. So if it is this what YOU are trying to do right now,
+ PLEASE DROP ME A NOTE!! Rolf Offermanns <rolf@offermanns.de>.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-terratec.
+
+config RADIO_TERRATEC_PORT
+ hex "Terratec i/o port (normally 0x590)"
+ depends on RADIO_TERRATEC=y
+ default "590"
+ help
+ Fill in the I/O port of your TerraTec FM radio card. If unsure, go
+ with the default.
+
+config RADIO_TRUST
+ tristate "Trust FM radio card"
+ depends on ISA && VIDEO_DEV
+ help
+ This is a driver for the Trust FM radio cards. Say Y if you have
+ such a card and want to use it under Linux.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-trust.
+
+config RADIO_TRUST_PORT
+ hex "Trust i/o port (usually 0x350 or 0x358)"
+ depends on RADIO_TRUST=y
+ default "350"
+ help
+ Enter the I/O port of your Trust FM radio card. If unsure, try the
+ values "0x350" or "0x358".
+
+config RADIO_TYPHOON
+ tristate "Typhoon Radio (a.k.a. EcoRadio)"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address and the frequency used for muting below.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-typhoon.
+
+config RADIO_TYPHOON_PROC_FS
+ bool "Support for /proc/radio-typhoon"
+ depends on PROC_FS && RADIO_TYPHOON
+ help
+ Say Y here if you want the typhoon radio card driver to write
+ status information (frequency, volume, muted, mute frequency,
+ base address) to /proc/radio-typhoon. The file can be viewed with
+ your favorite pager (i.e. use "more /proc/radio-typhoon" or "less
+ /proc/radio-typhoon" or simply "cat /proc/radio-typhoon").
+
+config RADIO_TYPHOON_PORT
+ hex "Typhoon I/O port (0x316 or 0x336)"
+ depends on RADIO_TYPHOON=y
+ default "316"
+ help
+ Enter the I/O port of your Typhoon or EcoRadio radio card.
+
+config RADIO_TYPHOON_MUTEFREQ
+ int "Typhoon frequency set when muting the device (kHz)"
+ depends on RADIO_TYPHOON=y
+ default "87500"
+ help
+ Enter the frequency used for muting the radio. The device is never
+ completely silent. If the volume is just turned down, you can still
+ hear silent voices and music. For that reason, the frequency of the
+ radio device is set to the frequency you can enter here whenever
+ the device is muted. There should be no local radio station at that
+ frequency.
+
+config RADIO_ZOLTRIX
+ tristate "Zoltrix Radio"
+ depends on ISA && VIDEO_DEV
+ ---help---
+ Choose Y here if you have one of these FM radio cards, and then fill
+ in the port address below.
+
+ In order to control your radio card, you will need to use programs
+ that are compatible with the Video For Linux API. Information on
+ this API and pointers to "v4l" programs may be found at
+ <file:Documentation/video4linux/API.html>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called radio-zoltrix.
+
+config RADIO_ZOLTRIX_PORT
+ hex "ZOLTRIX I/O port (0x20c or 0x30c)"
+ depends on RADIO_ZOLTRIX=y
+ default "20c"
+ help
+ Enter the I/O port of your Zoltrix radio card.
+
+endmenu
+