1 files changed, 185 insertions, 262 deletions

diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index c74d6604598e..690ee0d42eeb 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -15,9 +15,11 @@
 #include <linux/log2.h>
 #include <linux/module.h>
 
+#include <media/soc_camera.h>
+#include <media/soc_mediabus.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-chip-ident.h>
-#include <media/soc_camera.h>
+#include <media/v4l2-ctrls.h>
 
 /*
  * mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
@@ -101,6 +103,17 @@ static const struct mt9v022_datafmt mt9v022_monochrome_fmts[] = {
 
 struct mt9v022 {
 	struct v4l2_subdev subdev;
+	struct v4l2_ctrl_handler hdl;
+	struct {
+		/* exposure/auto-exposure cluster */
+		struct v4l2_ctrl *autoexposure;
+		struct v4l2_ctrl *exposure;
+	};
+	struct {
+		/* gain/auto-gain cluster */
+		struct v4l2_ctrl *autogain;
+		struct v4l2_ctrl *gain;
+	};
 	struct v4l2_rect rect;	/* Sensor window */
 	const struct mt9v022_datafmt *fmt;
 	const struct mt9v022_datafmt *fmts;
@@ -179,6 +192,8 @@ static int mt9v022_init(struct i2c_client *client)
 		ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
 	if (!ret)
 		ret = reg_write(client, MT9V022_DIGITAL_TEST_PATTERN, 0);
+	if (!ret)
+		return v4l2_ctrl_handler_setup(&mt9v022->hdl);
 
 	return ret;
 }
@@ -200,78 +215,6 @@ static int mt9v022_s_stream(struct v4l2_subdev *sd, int enable)
 	return 0;
 }
 
-static int mt9v022_set_bus_param(struct soc_camera_device *icd,
-				 unsigned long flags)
-{
-	struct i2c_client *client = to_i2c_client(to_soc_camera_control(icd));
-	struct mt9v022 *mt9v022 = to_mt9v022(client);
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned int width_flag = flags & SOCAM_DATAWIDTH_MASK;
-	int ret;
-	u16 pixclk = 0;
-
-	/* Only one width bit may be set */
-	if (!is_power_of_2(width_flag))
-		return -EINVAL;
-
-	if (icl->set_bus_param) {
-		ret = icl->set_bus_param(icl, width_flag);
-		if (ret)
-			return ret;
-	} else {
-		/*
-		 * Without board specific bus width settings we only support the
-		 * sensors native bus width
-		 */
-		if (width_flag != SOCAM_DATAWIDTH_10)
-			return -EINVAL;
-	}
-
-	flags = soc_camera_apply_sensor_flags(icl, flags);
-
-	if (flags & SOCAM_PCLK_SAMPLE_FALLING)
-		pixclk |= 0x10;
-
-	if (!(flags & SOCAM_HSYNC_ACTIVE_HIGH))
-		pixclk |= 0x1;
-
-	if (!(flags & SOCAM_VSYNC_ACTIVE_HIGH))
-		pixclk |= 0x2;
-
-	ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
-	if (ret < 0)
-		return ret;
-
-	if (!(flags & SOCAM_MASTER))
-		mt9v022->chip_control &= ~0x8;
-
-	ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
-	if (ret < 0)
-		return ret;
-
-	dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
-		pixclk, mt9v022->chip_control);
-
-	return 0;
-}
-
-static unsigned long mt9v022_query_bus_param(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-	unsigned int flags = SOCAM_MASTER | SOCAM_SLAVE |
-		SOCAM_PCLK_SAMPLE_RISING | SOCAM_PCLK_SAMPLE_FALLING |
-		SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_LOW |
-		SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_LOW |
-		SOCAM_DATA_ACTIVE_HIGH;
-
-	if (icl->query_bus_param)
-		flags |= icl->query_bus_param(icl) & SOCAM_DATAWIDTH_MASK;
-	else
-		flags |= SOCAM_DATAWIDTH_10;
-
-	return soc_camera_apply_sensor_flags(icl, flags);
-}
-
 static int mt9v022_s_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -390,7 +333,7 @@ static int mt9v022_s_fmt(struct v4l2_subdev *sd,
 
 	/*
 	 * The caller provides a supported format, as verified per call to
-	 * icd->try_fmt(), datawidth is from our supported format list
+	 * .try_mbus_fmt(), datawidth is from our supported format list
 	 */
 	switch (mf->code) {
 	case V4L2_MBUS_FMT_Y8_1X8:
@@ -503,236 +446,131 @@ static int mt9v022_s_register(struct v4l2_subdev *sd,
 }
 #endif
 
-static const struct v4l2_queryctrl mt9v022_controls[] = {
-	{
-		.id		= V4L2_CID_VFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Vertically",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_HFLIP,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Flip Horizontally",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 0,
-	}, {
-		.id		= V4L2_CID_GAIN,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Analog Gain",
-		.minimum	= 64,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	}, {
-		.id		= V4L2_CID_EXPOSURE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Exposure",
-		.minimum	= 1,
-		.maximum	= 255,
-		.step		= 1,
-		.default_value	= 255,
-		.flags		= V4L2_CTRL_FLAG_SLIDER,
-	}, {
-		.id		= V4L2_CID_AUTOGAIN,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Automatic Gain",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Automatic Exposure",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}
-};
-
-static struct soc_camera_ops mt9v022_ops = {
-	.set_bus_param		= mt9v022_set_bus_param,
-	.query_bus_param	= mt9v022_query_bus_param,
-	.controls		= mt9v022_controls,
-	.num_controls		= ARRAY_SIZE(mt9v022_controls),
-};
-
-static int mt9v022_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9v022_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct mt9v022 *mt9v022 = container_of(ctrl->handler,
+					       struct mt9v022, hdl);
+	struct v4l2_subdev *sd = &mt9v022->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	const struct v4l2_queryctrl *qctrl;
+	struct v4l2_ctrl *gain = mt9v022->gain;
+	struct v4l2_ctrl *exp = mt9v022->exposure;
 	unsigned long range;
 	int data;
 
-	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
-
 	switch (ctrl->id) {
-	case V4L2_CID_VFLIP:
-		data = reg_read(client, MT9V022_READ_MODE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x10);
-		break;
-	case V4L2_CID_HFLIP:
-		data = reg_read(client, MT9V022_READ_MODE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x20);
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x1);
-		break;
 	case V4L2_CID_AUTOGAIN:
-		data = reg_read(client, MT9V022_AEC_AGC_ENABLE);
-		if (data < 0)
-			return -EIO;
-		ctrl->value = !!(data & 0x2);
-		break;
-	case V4L2_CID_GAIN:
 		data = reg_read(client, MT9V022_ANALOG_GAIN);
 		if (data < 0)
 			return -EIO;
 
-		range = qctrl->maximum - qctrl->minimum;
-		ctrl->value = ((data - 16) * range + 24) / 48 + qctrl->minimum;
-
-		break;
-	case V4L2_CID_EXPOSURE:
+		range = gain->maximum - gain->minimum;
+		gain->val = ((data - 16) * range + 24) / 48 + gain->minimum;
+		return 0;
+	case V4L2_CID_EXPOSURE_AUTO:
 		data = reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH);
 		if (data < 0)
 			return -EIO;
 
-		range = qctrl->maximum - qctrl->minimum;
-		ctrl->value = ((data - 1) * range + 239) / 479 + qctrl->minimum;
-
-		break;
+		range = exp->maximum - exp->minimum;
+		exp->val = ((data - 1) * range + 239) / 479 + exp->minimum;
+		return 0;
 	}
-	return 0;
+	return -EINVAL;
 }
 
-static int mt9v022_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int mt9v022_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	int data;
+	struct mt9v022 *mt9v022 = container_of(ctrl->handler,
+					       struct mt9v022, hdl);
+	struct v4l2_subdev *sd = &mt9v022->subdev;
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
-	const struct v4l2_queryctrl *qctrl;
-
-	qctrl = soc_camera_find_qctrl(&mt9v022_ops, ctrl->id);
-	if (!qctrl)
-		return -EINVAL;
+	int data;
 
 	switch (ctrl->id) {
 	case V4L2_CID_VFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, MT9V022_READ_MODE, 0x10);
 		else
 			data = reg_clear(client, MT9V022_READ_MODE, 0x10);
 		if (data < 0)
 			return -EIO;
-		break;
+		return 0;
 	case V4L2_CID_HFLIP:
-		if (ctrl->value)
+		if (ctrl->val)
 			data = reg_set(client, MT9V022_READ_MODE, 0x20);
 		else
 			data = reg_clear(client, MT9V022_READ_MODE, 0x20);
 		if (data < 0)
 			return -EIO;
-		break;
-	case V4L2_CID_GAIN:
-		/* mt9v022 has minimum == default */
-		if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
-			return -EINVAL;
-		else {
-			unsigned long range = qctrl->maximum - qctrl->minimum;
+		return 0;
+	case V4L2_CID_AUTOGAIN:
+		if (ctrl->val) {
+			if (reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
+				return -EIO;
+		} else {
+			struct v4l2_ctrl *gain = mt9v022->gain;
+			/* mt9v022 has minimum == default */
+			unsigned long range = gain->maximum - gain->minimum;
 			/* Valid values 16 to 64, 32 to 64 must be even. */
-			unsigned long gain = ((ctrl->value - qctrl->minimum) *
+			unsigned long gain_val = ((gain->val - gain->minimum) *
 					      48 + range / 2) / range + 16;
-			if (gain >= 32)
-				gain &= ~1;
+
+			if (gain_val >= 32)
+				gain_val &= ~1;
+
 			/*
 			 * The user wants to set gain manually, hope, she
 			 * knows, what she's doing... Switch AGC off.
 			 */
-
 			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2) < 0)
 				return -EIO;
 
 			dev_dbg(&client->dev, "Setting gain from %d to %lu\n",
-				reg_read(client, MT9V022_ANALOG_GAIN), gain);
-			if (reg_write(client, MT9V022_ANALOG_GAIN, gain) < 0)
+				reg_read(client, MT9V022_ANALOG_GAIN), gain_val);
+			if (reg_write(client, MT9V022_ANALOG_GAIN, gain_val) < 0)
 				return -EIO;
 		}
-		break;
-	case V4L2_CID_EXPOSURE:
-		/* mt9v022 has maximum == default */
-		if (ctrl->value > qctrl->maximum || ctrl->value < qctrl->minimum)
-			return -EINVAL;
-		else {
-			unsigned long range = qctrl->maximum - qctrl->minimum;
-			unsigned long shutter = ((ctrl->value - qctrl->minimum) *
-						 479 + range / 2) / range + 1;
+		return 0;
+	case V4L2_CID_EXPOSURE_AUTO:
+		if (ctrl->val == V4L2_EXPOSURE_AUTO) {
+			data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
+		} else {
+			struct v4l2_ctrl *exp = mt9v022->exposure;
+			unsigned long range = exp->maximum - exp->minimum;
+			unsigned long shutter = ((exp->val - exp->minimum) *
+					479 + range / 2) / range + 1;
+
 			/*
 			 * The user wants to set shutter width manually, hope,
 			 * she knows, what she's doing... Switch AEC off.
 			 */
-
-			if (reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1) < 0)
+			data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
+			if (data < 0)
 				return -EIO;
-
 			dev_dbg(&client->dev, "Shutter width from %d to %lu\n",
-				reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
-				shutter);
+					reg_read(client, MT9V022_TOTAL_SHUTTER_WIDTH),
+					shutter);
 			if (reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
-				      shutter) < 0)
+						shutter) < 0)
 				return -EIO;
 		}
-		break;
-	case V4L2_CID_AUTOGAIN:
-		if (ctrl->value)
-			data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x2);
-		else
-			data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x2);
-		if (data < 0)
-			return -EIO;
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		if (ctrl->value)
-			data = reg_set(client, MT9V022_AEC_AGC_ENABLE, 0x1);
-		else
-			data = reg_clear(client, MT9V022_AEC_AGC_ENABLE, 0x1);
-		if (data < 0)
-			return -EIO;
-		break;
+		return 0;
 	}
-	return 0;
+	return -EINVAL;
 }
 
 /*
  * Interface active, can use i2c. If it fails, it can indeed mean, that
  * this wasn't our capture interface, so, we wait for the right one
  */
-static int mt9v022_video_probe(struct soc_camera_device *icd,
-			       struct i2c_client *client)
+static int mt9v022_video_probe(struct i2c_client *client)
 {
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	s32 data;
 	int ret;
 	unsigned long flags;
 
-	/* We must have a parent by now. And it cannot be a wrong one. */
-	BUG_ON(!icd->parent ||
-	       to_soc_camera_host(icd->parent)->nr != icd->iface);
-
 	/* Read out the chip version register */
 	data = reg_read(client, MT9V022_CHIP_VERSION);
 
@@ -806,16 +644,6 @@ ei2c:
 	return ret;
 }
 
-static void mt9v022_video_remove(struct soc_camera_device *icd)
-{
-	struct soc_camera_link *icl = to_soc_camera_link(icd);
-
-	dev_dbg(icd->pdev, "Video removed: %p, %p\n",
-		icd->parent, icd->vdev);
-	if (icl->free_bus)
-		icl->free_bus(icl);
-}
-
 static int mt9v022_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
@@ -826,9 +654,12 @@ static int mt9v022_g_skip_top_lines(struct v4l2_subdev *sd, u32 *lines)
 	return 0;
 }
 
+static const struct v4l2_ctrl_ops mt9v022_ctrl_ops = {
+	.g_volatile_ctrl = mt9v022_g_volatile_ctrl,
+	.s_ctrl = mt9v022_s_ctrl,
+};
+
 static struct v4l2_subdev_core_ops mt9v022_subdev_core_ops = {
-	.g_ctrl		= mt9v022_g_ctrl,
-	.s_ctrl		= mt9v022_s_ctrl,
 	.g_chip_ident	= mt9v022_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register	= mt9v022_g_register,
@@ -849,6 +680,72 @@ static int mt9v022_enum_fmt(struct v4l2_subdev *sd, unsigned int index,
 	return 0;
 }
 
+static int mt9v022_g_mbus_config(struct v4l2_subdev *sd,
+				struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+
+	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_SLAVE |
+		V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
+		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_HSYNC_ACTIVE_LOW |
+		V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
+		V4L2_MBUS_DATA_ACTIVE_HIGH;
+	cfg->type = V4L2_MBUS_PARALLEL;
+	cfg->flags = soc_camera_apply_board_flags(icl, cfg);
+
+	return 0;
+}
+
+static int mt9v022_s_mbus_config(struct v4l2_subdev *sd,
+				 const struct v4l2_mbus_config *cfg)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
+	struct mt9v022 *mt9v022 = to_mt9v022(client);
+	unsigned long flags = soc_camera_apply_board_flags(icl, cfg);
+	unsigned int bps = soc_mbus_get_fmtdesc(mt9v022->fmt->code)->bits_per_sample;
+	int ret;
+	u16 pixclk = 0;
+
+	if (icl->set_bus_param) {
+		ret = icl->set_bus_param(icl, 1 << (bps - 1));
+		if (ret)
+			return ret;
+	} else if (bps != 10) {
+		/*
+		 * Without board specific bus width settings we only support the
+		 * sensors native bus width
+		 */
+		return -EINVAL;
+	}
+
+	if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING)
+		pixclk |= 0x10;
+
+	if (!(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH))
+		pixclk |= 0x1;
+
+	if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH))
+		pixclk |= 0x2;
+
+	ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
+	if (ret < 0)
+		return ret;
+
+	if (!(flags & V4L2_MBUS_MASTER))
+		mt9v022->chip_control &= ~0x8;
+
+	ret = reg_write(client, MT9V022_CHIP_CONTROL, mt9v022->chip_control);
+	if (ret < 0)
+		return ret;
+
+	dev_dbg(&client->dev, "Calculated pixclk 0x%x, chip control 0x%x\n",
+		pixclk, mt9v022->chip_control);
+
+	return 0;
+}
+
 static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
 	.s_stream	= mt9v022_s_stream,
 	.s_mbus_fmt	= mt9v022_s_fmt,
@@ -858,6 +755,8 @@ static struct v4l2_subdev_video_ops mt9v022_subdev_video_ops = {
 	.g_crop		= mt9v022_g_crop,
 	.cropcap	= mt9v022_cropcap,
 	.enum_mbus_fmt	= mt9v022_enum_fmt,
+	.g_mbus_config	= mt9v022_g_mbus_config,
+	.s_mbus_config	= mt9v022_s_mbus_config,
 };
 
 static struct v4l2_subdev_sensor_ops mt9v022_subdev_sensor_ops = {
@@ -874,17 +773,10 @@ static int mt9v022_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
 	struct mt9v022 *mt9v022;
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
-	struct soc_camera_link *icl;
 	int ret;
 
-	if (!icd) {
-		dev_err(&client->dev, "MT9V022: missing soc-camera data!\n");
-		return -EINVAL;
-	}
-
-	icl = to_soc_camera_link(icd);
 	if (!icl) {
 		dev_err(&client->dev, "MT9V022 driver needs platform data\n");
 		return -EINVAL;
@@ -901,10 +793,39 @@ static int mt9v022_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	v4l2_i2c_subdev_init(&mt9v022->subdev, client, &mt9v022_subdev_ops);
+	v4l2_ctrl_handler_init(&mt9v022->hdl, 6);
+	v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_HFLIP, 0, 1, 1, 0);
+	mt9v022->autogain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
+	mt9v022->gain = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_GAIN, 0, 127, 1, 64);
+
+	/*
+	 * Simulated autoexposure. If enabled, we calculate shutter width
+	 * ourselves in the driver based on vertical blanking and frame width
+	 */
+	mt9v022->autoexposure = v4l2_ctrl_new_std_menu(&mt9v022->hdl,
+			&mt9v022_ctrl_ops, V4L2_CID_EXPOSURE_AUTO, 1, 0,
+			V4L2_EXPOSURE_AUTO);
+	mt9v022->exposure = v4l2_ctrl_new_std(&mt9v022->hdl, &mt9v022_ctrl_ops,
+			V4L2_CID_EXPOSURE, 1, 255, 1, 255);
+
+	mt9v022->subdev.ctrl_handler = &mt9v022->hdl;
+	if (mt9v022->hdl.error) {
+		int err = mt9v022->hdl.error;
+
+		kfree(mt9v022);
+		return err;
+	}
+	v4l2_ctrl_auto_cluster(2, &mt9v022->autoexposure,
+				V4L2_EXPOSURE_MANUAL, true);
+	v4l2_ctrl_auto_cluster(2, &mt9v022->autogain, 0, true);
 
 	mt9v022->chip_control = MT9V022_CHIP_CONTROL_DEFAULT;
 
-	icd->ops		= &mt9v022_ops;
 	/*
 	 * MT9V022 _really_ corrupts the first read out line.
 	 * TODO: verify on i.MX31
@@ -915,9 +836,9 @@ static int mt9v022_probe(struct i2c_client *client,
 	mt9v022->rect.width	= MT9V022_MAX_WIDTH;
 	mt9v022->rect.height	= MT9V022_MAX_HEIGHT;
 
-	ret = mt9v022_video_probe(icd, client);
+	ret = mt9v022_video_probe(client);
 	if (ret) {
-		icd->ops = NULL;
+		v4l2_ctrl_handler_free(&mt9v022->hdl);
 		kfree(mt9v022);
 	}
 
@@ -927,10 +848,12 @@ static int mt9v022_probe(struct i2c_client *client,
 static int mt9v022_remove(struct i2c_client *client)
 {
 	struct mt9v022 *mt9v022 = to_mt9v022(client);
-	struct soc_camera_device *icd = client->dev.platform_data;
+	struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
 
-	icd->ops = NULL;
-	mt9v022_video_remove(icd);
+	v4l2_device_unregister_subdev(&mt9v022->subdev);
+	if (icl->free_bus)
+		icl->free_bus(icl);
+	v4l2_ctrl_handler_free(&mt9v022->hdl);
 	kfree(mt9v022);
 
 	return 0;