summaryrefslogtreecommitdiff
path: root/drivers/media/video/ovcamchip/ov6x30.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/ovcamchip/ov6x30.c')
-rw-r--r--drivers/media/video/ovcamchip/ov6x30.c374
1 files changed, 374 insertions, 0 deletions
diff --git a/drivers/media/video/ovcamchip/ov6x30.c b/drivers/media/video/ovcamchip/ov6x30.c
new file mode 100644
index 000000000000..44a842379b45
--- /dev/null
+++ b/drivers/media/video/ovcamchip/ov6x30.c
@@ -0,0 +1,374 @@
+/* OmniVision OV6630/OV6130 Camera Chip Support Code
+ *
+ * Copyright (c) 1999-2004 Mark McClelland <mark@alpha.dyndns.org>
+ * http://alpha.dyndns.org/ov511/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version. NO WARRANTY OF ANY KIND is expressed or implied.
+ */
+
+#define DEBUG
+
+#include <linux/slab.h>
+#include "ovcamchip_priv.h"
+
+/* Registers */
+#define REG_GAIN 0x00 /* gain [5:0] */
+#define REG_BLUE 0x01 /* blue gain */
+#define REG_RED 0x02 /* red gain */
+#define REG_SAT 0x03 /* saturation [7:3] */
+#define REG_CNT 0x05 /* Y contrast [3:0] */
+#define REG_BRT 0x06 /* Y brightness */
+#define REG_SHARP 0x07 /* sharpness */
+#define REG_WB_BLUE 0x0C /* WB blue ratio [5:0] */
+#define REG_WB_RED 0x0D /* WB red ratio [5:0] */
+#define REG_EXP 0x10 /* exposure */
+
+/* Window parameters */
+#define HWSBASE 0x38
+#define HWEBASE 0x3A
+#define VWSBASE 0x05
+#define VWEBASE 0x06
+
+struct ov6x30 {
+ int auto_brt;
+ int auto_exp;
+ int backlight;
+ int bandfilt;
+ int mirror;
+};
+
+static struct ovcamchip_regvals regvals_init_6x30[] = {
+ { 0x12, 0x80 }, /* reset */
+ { 0x00, 0x1f }, /* Gain */
+ { 0x01, 0x99 }, /* Blue gain */
+ { 0x02, 0x7c }, /* Red gain */
+ { 0x03, 0xc0 }, /* Saturation */
+ { 0x05, 0x0a }, /* Contrast */
+ { 0x06, 0x95 }, /* Brightness */
+ { 0x07, 0x2d }, /* Sharpness */
+ { 0x0c, 0x20 },
+ { 0x0d, 0x20 },
+ { 0x0e, 0x20 },
+ { 0x0f, 0x05 },
+ { 0x10, 0x9a }, /* "exposure check" */
+ { 0x11, 0x00 }, /* Pixel clock = fastest */
+ { 0x12, 0x24 }, /* Enable AGC and AWB */
+ { 0x13, 0x21 },
+ { 0x14, 0x80 },
+ { 0x15, 0x01 },
+ { 0x16, 0x03 },
+ { 0x17, 0x38 },
+ { 0x18, 0xea },
+ { 0x19, 0x04 },
+ { 0x1a, 0x93 },
+ { 0x1b, 0x00 },
+ { 0x1e, 0xc4 },
+ { 0x1f, 0x04 },
+ { 0x20, 0x20 },
+ { 0x21, 0x10 },
+ { 0x22, 0x88 },
+ { 0x23, 0xc0 }, /* Crystal circuit power level */
+ { 0x25, 0x9a }, /* Increase AEC black pixel ratio */
+ { 0x26, 0xb2 }, /* BLC enable */
+ { 0x27, 0xa2 },
+ { 0x28, 0x00 },
+ { 0x29, 0x00 },
+ { 0x2a, 0x84 }, /* (keep) */
+ { 0x2b, 0xa8 }, /* (keep) */
+ { 0x2c, 0xa0 },
+ { 0x2d, 0x95 }, /* Enable auto-brightness */
+ { 0x2e, 0x88 },
+ { 0x33, 0x26 },
+ { 0x34, 0x03 },
+ { 0x36, 0x8f },
+ { 0x37, 0x80 },
+ { 0x38, 0x83 },
+ { 0x39, 0x80 },
+ { 0x3a, 0x0f },
+ { 0x3b, 0x3c },
+ { 0x3c, 0x1a },
+ { 0x3d, 0x80 },
+ { 0x3e, 0x80 },
+ { 0x3f, 0x0e },
+ { 0x40, 0x00 }, /* White bal */
+ { 0x41, 0x00 }, /* White bal */
+ { 0x42, 0x80 },
+ { 0x43, 0x3f }, /* White bal */
+ { 0x44, 0x80 },
+ { 0x45, 0x20 },
+ { 0x46, 0x20 },
+ { 0x47, 0x80 },
+ { 0x48, 0x7f },
+ { 0x49, 0x00 },
+ { 0x4a, 0x00 },
+ { 0x4b, 0x80 },
+ { 0x4c, 0xd0 },
+ { 0x4d, 0x10 }, /* U = 0.563u, V = 0.714v */
+ { 0x4e, 0x40 },
+ { 0x4f, 0x07 }, /* UV average mode, color killer: strongest */
+ { 0x50, 0xff },
+ { 0x54, 0x23 }, /* Max AGC gain: 18dB */
+ { 0x55, 0xff },
+ { 0x56, 0x12 },
+ { 0x57, 0x81 }, /* (default) */
+ { 0x58, 0x75 },
+ { 0x59, 0x01 }, /* AGC dark current compensation: +1 */
+ { 0x5a, 0x2c },
+ { 0x5b, 0x0f }, /* AWB chrominance levels */
+ { 0x5c, 0x10 },
+ { 0x3d, 0x80 },
+ { 0x27, 0xa6 },
+ /* Toggle AWB off and on */
+ { 0x12, 0x20 },
+ { 0x12, 0x24 },
+
+ { 0xff, 0xff }, /* END MARKER */
+};
+
+/* This initializes the OV6x30 camera chip and relevant variables. */
+static int ov6x30_init(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x30 *s;
+ int rc;
+
+ DDEBUG(4, &c->dev, "entered");
+
+ rc = ov_write_regvals(c, regvals_init_6x30);
+ if (rc < 0)
+ return rc;
+
+ ov->spriv = s = kmalloc(sizeof *s, GFP_KERNEL);
+ if (!s)
+ return -ENOMEM;
+ memset(s, 0, sizeof *s);
+
+ s->auto_brt = 1;
+ s->auto_exp = 1;
+
+ return rc;
+}
+
+static int ov6x30_free(struct i2c_client *c)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+
+ kfree(ov->spriv);
+ return 0;
+}
+
+static int ov6x30_set_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x30 *s = ov->spriv;
+ int rc;
+ int v = ctl->value;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_write_mask(c, REG_CNT, v >> 12, 0x0f);
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_write(c, REG_BRT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_write(c, REG_SAT, v >> 8);
+ break;
+ case OVCAMCHIP_CID_HUE:
+ rc = ov_write(c, REG_RED, 0xFF - (v >> 8));
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, REG_BLUE, v >> 8);
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_write(c, REG_EXP, v);
+ break;
+ case OVCAMCHIP_CID_FREQ:
+ {
+ int sixty = (v == 60);
+
+ rc = ov_write(c, 0x2b, sixty?0xa8:0x28);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write(c, 0x2a, sixty?0x84:0xa4);
+ break;
+ }
+ case OVCAMCHIP_CID_BANDFILT:
+ rc = ov_write_mask(c, 0x2d, v?0x04:0x00, 0x04);
+ s->bandfilt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ rc = ov_write_mask(c, 0x2d, v?0x10:0x00, 0x10);
+ s->auto_brt = v;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ rc = ov_write_mask(c, 0x28, v?0x00:0x10, 0x10);
+ s->auto_exp = v;
+ break;
+ case OVCAMCHIP_CID_BACKLIGHT:
+ {
+ rc = ov_write_mask(c, 0x4e, v?0x80:0x60, 0xe0);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x29, v?0x08:0x00, 0x08);
+ if (rc < 0)
+ goto out;
+
+ rc = ov_write_mask(c, 0x28, v?0x02:0x00, 0x02);
+ s->backlight = v;
+ break;
+ }
+ case OVCAMCHIP_CID_MIRROR:
+ rc = ov_write_mask(c, 0x12, v?0x40:0x00, 0x40);
+ s->mirror = v;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+out:
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, v, rc);
+ return rc;
+}
+
+static int ov6x30_get_control(struct i2c_client *c,
+ struct ovcamchip_control *ctl)
+{
+ struct ovcamchip *ov = i2c_get_clientdata(c);
+ struct ov6x30 *s = ov->spriv;
+ int rc = 0;
+ unsigned char val = 0;
+
+ switch (ctl->id) {
+ case OVCAMCHIP_CID_CONT:
+ rc = ov_read(c, REG_CNT, &val);
+ ctl->value = (val & 0x0f) << 12;
+ break;
+ case OVCAMCHIP_CID_BRIGHT:
+ rc = ov_read(c, REG_BRT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_SAT:
+ rc = ov_read(c, REG_SAT, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_HUE:
+ rc = ov_read(c, REG_BLUE, &val);
+ ctl->value = val << 8;
+ break;
+ case OVCAMCHIP_CID_EXP:
+ rc = ov_read(c, REG_EXP, &val);
+ ctl->value = val;
+ break;
+ case OVCAMCHIP_CID_BANDFILT:
+ ctl->value = s->bandfilt;
+ break;
+ case OVCAMCHIP_CID_AUTOBRIGHT:
+ ctl->value = s->auto_brt;
+ break;
+ case OVCAMCHIP_CID_AUTOEXP:
+ ctl->value = s->auto_exp;
+ break;
+ case OVCAMCHIP_CID_BACKLIGHT:
+ ctl->value = s->backlight;
+ break;
+ case OVCAMCHIP_CID_MIRROR:
+ ctl->value = s->mirror;
+ break;
+ default:
+ DDEBUG(2, &c->dev, "control not supported: %d", ctl->id);
+ return -EPERM;
+ }
+
+ DDEBUG(3, &c->dev, "id=%d, arg=%d, rc=%d", ctl->id, ctl->value, rc);
+ return rc;
+}
+
+static int ov6x30_mode_init(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ /******** QCIF-specific regs ********/
+
+ ov_write_mask(c, 0x14, win->quarter?0x20:0x00, 0x20);
+
+ /******** Palette-specific regs ********/
+
+ if (win->format == VIDEO_PALETTE_GREY) {
+ if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+ /* Do nothing - we're already in 8-bit mode */
+ } else {
+ ov_write_mask(c, 0x13, 0x20, 0x20);
+ }
+ } else {
+ /* The OV518 needs special treatment. Although both the OV518
+ * and the OV6630 support a 16-bit video bus, only the 8 bit Y
+ * bus is actually used. The UV bus is tied to ground.
+ * Therefore, the OV6630 needs to be in 8-bit multiplexed
+ * output mode */
+
+ if (c->adapter->id == (I2C_ALGO_SMBUS | I2C_HW_SMBUS_OV518)) {
+ /* Do nothing - we want to stay in 8-bit mode */
+ /* Warning: Messing with reg 0x13 breaks OV518 color */
+ } else {
+ ov_write_mask(c, 0x13, 0x00, 0x20);
+ }
+ }
+
+ /******** Clock programming ********/
+
+ ov_write(c, 0x11, win->clockdiv);
+
+ return 0;
+}
+
+static int ov6x30_set_window(struct i2c_client *c, struct ovcamchip_window *win)
+{
+ int ret, hwscale, vwscale;
+
+ ret = ov6x30_mode_init(c, win);
+ if (ret < 0)
+ return ret;
+
+ if (win->quarter) {
+ hwscale = 0;
+ vwscale = 0;
+ } else {
+ hwscale = 1;
+ vwscale = 1; /* The datasheet says 0; it's wrong */
+ }
+
+ ov_write(c, 0x17, HWSBASE + (win->x >> hwscale));
+ ov_write(c, 0x18, HWEBASE + ((win->x + win->width) >> hwscale));
+ ov_write(c, 0x19, VWSBASE + (win->y >> vwscale));
+ ov_write(c, 0x1a, VWEBASE + ((win->y + win->height) >> vwscale));
+
+ return 0;
+}
+
+static int ov6x30_command(struct i2c_client *c, unsigned int cmd, void *arg)
+{
+ switch (cmd) {
+ case OVCAMCHIP_CMD_S_CTRL:
+ return ov6x30_set_control(c, arg);
+ case OVCAMCHIP_CMD_G_CTRL:
+ return ov6x30_get_control(c, arg);
+ case OVCAMCHIP_CMD_S_MODE:
+ return ov6x30_set_window(c, arg);
+ default:
+ DDEBUG(2, &c->dev, "command not supported: %d", cmd);
+ return -ENOIOCTLCMD;
+ }
+}
+
+struct ovcamchip_ops ov6x30_ops = {
+ .init = ov6x30_init,
+ .free = ov6x30_free,
+ .command = ov6x30_command,
+};