diff options
Diffstat (limited to 'drivers/media/video/pvrusb2/pvrusb2-devattr.h')
| -rw-r--r-- | drivers/media/video/pvrusb2/pvrusb2-devattr.h | 199 |
1 files changed, 0 insertions, 199 deletions
diff --git a/drivers/media/video/pvrusb2/pvrusb2-devattr.h b/drivers/media/video/pvrusb2/pvrusb2-devattr.h deleted file mode 100644 index 273c8d4b3853..000000000000 --- a/drivers/media/video/pvrusb2/pvrusb2-devattr.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * - * - * Copyright (C) 2005 Mike Isely <isely@pobox.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef __PVRUSB2_DEVATTR_H -#define __PVRUSB2_DEVATTR_H - -#include <linux/mod_devicetable.h> -#include <linux/videodev2.h> -#ifdef CONFIG_VIDEO_PVRUSB2_DVB -#include "pvrusb2-dvb.h" -#endif - -/* - - This header defines structures used to describe attributes of a device. - -*/ - - -#define PVR2_CLIENT_ID_NULL 0 -#define PVR2_CLIENT_ID_MSP3400 1 -#define PVR2_CLIENT_ID_CX25840 2 -#define PVR2_CLIENT_ID_SAA7115 3 -#define PVR2_CLIENT_ID_TUNER 4 -#define PVR2_CLIENT_ID_CS53L32A 5 -#define PVR2_CLIENT_ID_WM8775 6 -#define PVR2_CLIENT_ID_DEMOD 7 - -struct pvr2_device_client_desc { - /* One ovr PVR2_CLIENT_ID_xxxx */ - unsigned char module_id; - - /* Null-terminated array of I2C addresses to try in order - initialize the module. It's safe to make this null terminated - since we're never going to encounter an i2c device with an - address of zero. If this is a null pointer or zero-length, - then no I2C addresses have been specified, in which case we'll - try some compiled in defaults for now. */ - unsigned char *i2c_address_list; -}; - -struct pvr2_device_client_table { - const struct pvr2_device_client_desc *lst; - unsigned char cnt; -}; - - -struct pvr2_string_table { - const char **lst; - unsigned int cnt; -}; - -#define PVR2_ROUTING_SCHEME_HAUPPAUGE 0 -#define PVR2_ROUTING_SCHEME_GOTVIEW 1 -#define PVR2_ROUTING_SCHEME_ONAIR 2 -#define PVR2_ROUTING_SCHEME_AV400 3 - -#define PVR2_DIGITAL_SCHEME_NONE 0 -#define PVR2_DIGITAL_SCHEME_HAUPPAUGE 1 -#define PVR2_DIGITAL_SCHEME_ONAIR 2 - -#define PVR2_LED_SCHEME_NONE 0 -#define PVR2_LED_SCHEME_HAUPPAUGE 1 - -#define PVR2_IR_SCHEME_NONE 0 -#define PVR2_IR_SCHEME_24XXX 1 /* FX2-controlled IR */ -#define PVR2_IR_SCHEME_ZILOG 2 /* HVR-1950 style (must be taken out of reset) */ -#define PVR2_IR_SCHEME_24XXX_MCE 3 /* 24xxx MCE device */ -#define PVR2_IR_SCHEME_29XXX 4 /* Original 29xxx device */ - -/* This describes a particular hardware type (except for the USB device ID - which must live in a separate structure due to environmental - constraints). See the top of pvrusb2-hdw.c for where this is - instantiated. */ -struct pvr2_device_desc { - /* Single line text description of hardware */ - const char *description; - - /* Single token identifier for hardware */ - const char *shortname; - - /* List of additional client modules we need to load */ - struct pvr2_string_table client_modules; - - /* List of defined client modules we need to load */ - struct pvr2_device_client_table client_table; - - /* List of FX2 firmware file names we should search; if empty then - FX2 firmware check / load is skipped and we assume the device - was initialized from internal ROM. */ - struct pvr2_string_table fx2_firmware; - -#ifdef CONFIG_VIDEO_PVRUSB2_DVB - /* callback functions to handle attachment of digital tuner & demod */ - const struct pvr2_dvb_props *dvb_props; - -#endif - /* Initial standard bits to use for this device, if not zero. - Anything set here is also implied as an available standard. - Note: This is ignored if overridden on the module load line via - the video_std module option. */ - v4l2_std_id default_std_mask; - - /* V4L tuner type ID to use with this device (only used if the - driver could not discover the type any other way). */ - int default_tuner_type; - - /* Signal routing scheme used by device, contains one of - PVR2_ROUTING_SCHEME_XXX. Schemes have to be defined as we - encounter them. This is an arbitrary integer scheme id; its - meaning is contained entirely within the driver and is - interpreted by logic which must send commands to the chip-level - drivers (search for things which touch this field). */ - unsigned char signal_routing_scheme; - - /* Indicates scheme for controlling device's LED (if any). The - driver will turn on the LED when streaming is underway. This - contains one of PVR2_LED_SCHEME_XXX. */ - unsigned char led_scheme; - - /* Control scheme to use if there is a digital tuner. This - contains one of PVR2_DIGITAL_SCHEME_XXX. This is an arbitrary - integer scheme id; its meaning is contained entirely within the - driver and is interpreted by logic which must control the - streaming pathway (search for things which touch this field). */ - unsigned char digital_control_scheme; - - /* If set, we don't bother trying to load cx23416 firmware. */ - unsigned int flag_skip_cx23416_firmware:1; - - /* If set, the encoder must be healthy in order for digital mode to - work (otherwise we assume that digital streaming will work even - if we fail to locate firmware for the encoder). If the device - doesn't support digital streaming then this flag has no - effect. */ - unsigned int flag_digital_requires_cx23416:1; - - /* Device has a hauppauge eeprom which we can interrogate. */ - unsigned int flag_has_hauppauge_rom:1; - - /* Device does not require a powerup command to be issued. */ - unsigned int flag_no_powerup:1; - - /* Device has a cx25840 - this enables special additional logic to - handle it. */ - unsigned int flag_has_cx25840:1; - - /* Device has a wm8775 - this enables special additional logic to - ensure that it is found. */ - unsigned int flag_has_wm8775:1; - - /* Indicate IR scheme of hardware. If not set, then it is assumed - that IR can work without any help from the driver. */ - unsigned int ir_scheme:3; - - /* These bits define which kinds of sources the device can handle. - Note: Digital tuner presence is inferred by the - digital_control_scheme enumeration. */ - unsigned int flag_has_fmradio:1; /* Has FM radio receiver */ - unsigned int flag_has_analogtuner:1; /* Has analog tuner */ - unsigned int flag_has_composite:1; /* Has composite input */ - unsigned int flag_has_svideo:1; /* Has s-video input */ - unsigned int flag_fx2_16kb:1; /* 16KB FX2 firmware OK here */ - - /* If this driver is considered experimental, i.e. not all aspects - are working correctly and/or it is untested, mark that fact - with this flag. */ - unsigned int flag_is_experimental:1; -}; - -extern struct usb_device_id pvr2_device_table[]; - -#endif /* __PVRUSB2_HDW_INTERNAL_H */ - -/* - Stuff for Emacs to see, in order to encourage consistent editing style: - *** Local Variables: *** - *** mode: c *** - *** fill-column: 75 *** - *** tab-width: 8 *** - *** c-basic-offset: 8 *** - *** End: *** - */ |