diff options
Diffstat (limited to 'drivers/media/video/s5p-fimc/fimc-lite-reg.c')
| -rw-r--r-- | drivers/media/video/s5p-fimc/fimc-lite-reg.c | 300 |
1 files changed, 300 insertions, 0 deletions
diff --git a/drivers/media/video/s5p-fimc/fimc-lite-reg.c b/drivers/media/video/s5p-fimc/fimc-lite-reg.c new file mode 100644 index 000000000000..419adfb7cdf9 --- /dev/null +++ b/drivers/media/video/s5p-fimc/fimc-lite-reg.c @@ -0,0 +1,300 @@ +/* + * Register interface file for EXYNOS FIMC-LITE (camera interface) driver + * + * Copyright (C) 2012 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/io.h> +#include <linux/delay.h> +#include <media/s5p_fimc.h> + +#include "fimc-lite-reg.h" +#include "fimc-lite.h" +#include "fimc-core.h" + +#define FLITE_RESET_TIMEOUT 50 /* in ms */ + +void flite_hw_reset(struct fimc_lite *dev) +{ + unsigned long end = jiffies + msecs_to_jiffies(FLITE_RESET_TIMEOUT); + u32 cfg; + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg |= FLITE_REG_CIGCTRL_SWRST_REQ; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + while (time_is_after_jiffies(end)) { + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + if (cfg & FLITE_REG_CIGCTRL_SWRST_RDY) + break; + usleep_range(1000, 5000); + } + + cfg |= FLITE_REG_CIGCTRL_SWRST; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +void flite_hw_clear_pending_irq(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS); + cfg &= ~FLITE_REG_CISTATUS_IRQ_CAM; + writel(cfg, dev->regs + FLITE_REG_CISTATUS); +} + +u32 flite_hw_get_interrupt_source(struct fimc_lite *dev) +{ + u32 intsrc = readl(dev->regs + FLITE_REG_CISTATUS); + return intsrc & FLITE_REG_CISTATUS_IRQ_MASK; +} + +void flite_hw_clear_last_capture_end(struct fimc_lite *dev) +{ + + u32 cfg = readl(dev->regs + FLITE_REG_CISTATUS2); + cfg &= ~FLITE_REG_CISTATUS2_LASTCAPEND; + writel(cfg, dev->regs + FLITE_REG_CISTATUS2); +} + +void flite_hw_set_interrupt_mask(struct fimc_lite *dev) +{ + u32 cfg, intsrc; + + /* Select interrupts to be enabled for each output mode */ + if (dev->out_path == FIMC_IO_DMA) { + intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN | + FLITE_REG_CIGCTRL_IRQ_LASTEN | + FLITE_REG_CIGCTRL_IRQ_STARTEN; + } else { + /* An output to the FIMC-IS */ + intsrc = FLITE_REG_CIGCTRL_IRQ_OVFEN | + FLITE_REG_CIGCTRL_IRQ_LASTEN; + } + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg |= FLITE_REG_CIGCTRL_IRQ_DISABLE_MASK; + cfg &= ~intsrc; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +void flite_hw_capture_start(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT); + cfg |= FLITE_REG_CIIMGCPT_IMGCPTEN; + writel(cfg, dev->regs + FLITE_REG_CIIMGCPT); +} + +void flite_hw_capture_stop(struct fimc_lite *dev) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIIMGCPT); + cfg &= ~FLITE_REG_CIIMGCPT_IMGCPTEN; + writel(cfg, dev->regs + FLITE_REG_CIIMGCPT); +} + +/* + * Test pattern (color bars) enable/disable. External sensor + * pixel clock must be active for the test pattern to work. + */ +void flite_hw_set_test_pattern(struct fimc_lite *dev, bool on) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + if (on) + cfg |= FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR; + else + cfg &= ~FLITE_REG_CIGCTRL_TEST_PATTERN_COLORBAR; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); +} + +static const u32 src_pixfmt_map[8][3] = { + { V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCBYCR, + FLITE_REG_CIGCTRL_YUV422_1P }, + { V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_YCRYCB, + FLITE_REG_CIGCTRL_YUV422_1P }, + { V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CBYCRY, + FLITE_REG_CIGCTRL_YUV422_1P }, + { V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CISRCSIZE_ORDER422_IN_CRYCBY, + FLITE_REG_CIGCTRL_YUV422_1P }, + { V4L2_PIX_FMT_SGRBG8, 0, FLITE_REG_CIGCTRL_RAW8 }, + { V4L2_PIX_FMT_SGRBG10, 0, FLITE_REG_CIGCTRL_RAW10 }, + { V4L2_PIX_FMT_SGRBG12, 0, FLITE_REG_CIGCTRL_RAW12 }, + { V4L2_MBUS_FMT_JPEG_1X8, 0, FLITE_REG_CIGCTRL_USER(1) }, +}; + +/* Set camera input pixel format and resolution */ +void flite_hw_set_source_format(struct fimc_lite *dev, struct flite_frame *f) +{ + enum v4l2_mbus_pixelcode pixelcode = dev->fmt->mbus_code; + unsigned int i = ARRAY_SIZE(src_pixfmt_map); + u32 cfg; + + while (i-- >= 0) { + if (src_pixfmt_map[i][0] == pixelcode) + break; + } + + if (i == 0 && src_pixfmt_map[i][0] != pixelcode) { + v4l2_err(dev->vfd, + "Unsupported pixel code, falling back to %#08x\n", + src_pixfmt_map[i][0]); + } + + cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + cfg &= ~FLITE_REG_CIGCTRL_FMT_MASK; + cfg |= src_pixfmt_map[i][2]; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + cfg = readl(dev->regs + FLITE_REG_CISRCSIZE); + cfg &= ~(FLITE_REG_CISRCSIZE_ORDER422_MASK | + FLITE_REG_CISRCSIZE_SIZE_CAM_MASK); + cfg |= (f->f_width << 16) | f->f_height; + cfg |= src_pixfmt_map[i][1]; + writel(cfg, dev->regs + FLITE_REG_CISRCSIZE); +} + +/* Set the camera host input window offsets (cropping) */ +void flite_hw_set_window_offset(struct fimc_lite *dev, struct flite_frame *f) +{ + u32 hoff2, voff2; + u32 cfg; + + cfg = readl(dev->regs + FLITE_REG_CIWDOFST); + cfg &= ~FLITE_REG_CIWDOFST_OFST_MASK; + cfg |= (f->rect.left << 16) | f->rect.top; + cfg |= FLITE_REG_CIWDOFST_WINOFSEN; + writel(cfg, dev->regs + FLITE_REG_CIWDOFST); + + hoff2 = f->f_width - f->rect.width - f->rect.left; + voff2 = f->f_height - f->rect.height - f->rect.top; + + cfg = (hoff2 << 16) | voff2; + writel(cfg, dev->regs + FLITE_REG_CIWDOFST2); +} + +/* Select camera port (A, B) */ +static void flite_hw_set_camera_port(struct fimc_lite *dev, int id) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGENERAL); + if (id == 0) + cfg &= ~FLITE_REG_CIGENERAL_CAM_B; + else + cfg |= FLITE_REG_CIGENERAL_CAM_B; + writel(cfg, dev->regs + FLITE_REG_CIGENERAL); +} + +/* Select serial or parallel bus, camera port (A,B) and set signals polarity */ +void flite_hw_set_camera_bus(struct fimc_lite *dev, + struct s5p_fimc_isp_info *s_info) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + unsigned int flags = s_info->flags; + + if (s_info->bus_type != FIMC_MIPI_CSI2) { + cfg &= ~(FLITE_REG_CIGCTRL_SELCAM_MIPI | + FLITE_REG_CIGCTRL_INVPOLPCLK | + FLITE_REG_CIGCTRL_INVPOLVSYNC | + FLITE_REG_CIGCTRL_INVPOLHREF); + + if (flags & V4L2_MBUS_PCLK_SAMPLE_FALLING) + cfg |= FLITE_REG_CIGCTRL_INVPOLPCLK; + + if (flags & V4L2_MBUS_VSYNC_ACTIVE_LOW) + cfg |= FLITE_REG_CIGCTRL_INVPOLVSYNC; + + if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW) + cfg |= FLITE_REG_CIGCTRL_INVPOLHREF; + } else { + cfg |= FLITE_REG_CIGCTRL_SELCAM_MIPI; + } + + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + flite_hw_set_camera_port(dev, s_info->mux_id); +} + +void flite_hw_set_out_order(struct fimc_lite *dev, struct flite_frame *f) +{ + static const u32 pixcode[4][2] = { + { V4L2_MBUS_FMT_YUYV8_2X8, FLITE_REG_CIODMAFMT_YCBYCR }, + { V4L2_MBUS_FMT_YVYU8_2X8, FLITE_REG_CIODMAFMT_YCRYCB }, + { V4L2_MBUS_FMT_UYVY8_2X8, FLITE_REG_CIODMAFMT_CBYCRY }, + { V4L2_MBUS_FMT_VYUY8_2X8, FLITE_REG_CIODMAFMT_CRYCBY }, + }; + u32 cfg = readl(dev->regs + FLITE_REG_CIODMAFMT); + unsigned int i = ARRAY_SIZE(pixcode); + + while (i-- >= 0) + if (pixcode[i][0] == dev->fmt->mbus_code) + break; + cfg &= ~FLITE_REG_CIODMAFMT_YCBCR_ORDER_MASK; + writel(cfg | pixcode[i][1], dev->regs + FLITE_REG_CIODMAFMT); +} + +void flite_hw_set_dma_window(struct fimc_lite *dev, struct flite_frame *f) +{ + u32 cfg; + + /* Maximum output pixel size */ + cfg = readl(dev->regs + FLITE_REG_CIOCAN); + cfg &= ~FLITE_REG_CIOCAN_MASK; + cfg = (f->f_height << 16) | f->f_width; + writel(cfg, dev->regs + FLITE_REG_CIOCAN); + + /* DMA offsets */ + cfg = readl(dev->regs + FLITE_REG_CIOOFF); + cfg &= ~FLITE_REG_CIOOFF_MASK; + cfg |= (f->rect.top << 16) | f->rect.left; + writel(cfg, dev->regs + FLITE_REG_CIOOFF); +} + +/* Enable/disable output DMA, set output pixel size and offsets (composition) */ +void flite_hw_set_output_dma(struct fimc_lite *dev, struct flite_frame *f, + bool enable) +{ + u32 cfg = readl(dev->regs + FLITE_REG_CIGCTRL); + + if (!enable) { + cfg |= FLITE_REG_CIGCTRL_ODMA_DISABLE; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + return; + } + + cfg &= ~FLITE_REG_CIGCTRL_ODMA_DISABLE; + writel(cfg, dev->regs + FLITE_REG_CIGCTRL); + + flite_hw_set_out_order(dev, f); + flite_hw_set_dma_window(dev, f); +} + +void flite_hw_dump_regs(struct fimc_lite *dev, const char *label) +{ + struct { + u32 offset; + const char * const name; + } registers[] = { + { 0x00, "CISRCSIZE" }, + { 0x04, "CIGCTRL" }, + { 0x08, "CIIMGCPT" }, + { 0x0c, "CICPTSEQ" }, + { 0x10, "CIWDOFST" }, + { 0x14, "CIWDOFST2" }, + { 0x18, "CIODMAFMT" }, + { 0x20, "CIOCAN" }, + { 0x24, "CIOOFF" }, + { 0x30, "CIOSA" }, + { 0x40, "CISTATUS" }, + { 0x44, "CISTATUS2" }, + { 0xf0, "CITHOLD" }, + { 0xfc, "CIGENERAL" }, + }; + u32 i; + + pr_info("--- %s ---\n", label); + for (i = 0; i < ARRAY_SIZE(registers); i++) { + u32 cfg = readl(dev->regs + registers[i].offset); + pr_info("%s: %s:\t0x%08x\n", __func__, registers[i].name, cfg); + } +} |