summaryrefslogtreecommitdiff
path: root/drivers/media/video/tegra
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/video/tegra')
-rw-r--r--drivers/media/video/tegra/Kconfig7
-rw-r--r--drivers/media/video/tegra/Makefile6
-rwxr-xr-xdrivers/media/video/tegra/ov5650.c765
3 files changed, 777 insertions, 1 deletions
diff --git a/drivers/media/video/tegra/Kconfig b/drivers/media/video/tegra/Kconfig
index ae77e8994dc8..1a122258ad82 100644
--- a/drivers/media/video/tegra/Kconfig
+++ b/drivers/media/video/tegra/Kconfig
@@ -8,3 +8,10 @@ config TEGRA_CAMERA
Enables support for the Tegra camera interface
If unsure, say Y
+
+config VIDEO_OV5650
+ tristate "OV5650 camera sensor support"
+ depends on I2C && ARCH_TEGRA
+ ---help---
+ This is a driver for the Omnivision OV5650 5MP camera sensor
+ for use with the tegra isp.
diff --git a/drivers/media/video/tegra/Makefile b/drivers/media/video/tegra/Makefile
index 68b5c42b0e7a..1ff76a82df40 100644
--- a/drivers/media/video/tegra/Makefile
+++ b/drivers/media/video/tegra/Makefile
@@ -1,2 +1,6 @@
+#
+# Makefile for the video capture/playback device drivers.
+#
obj-y += avp/
-obj-$(CONFIG_TEGRA_CAMERA) += tegra_camera.o
+obj-$(CONFIG_TEGRA_CAMERA) += tegra_camera.o
+obj-$(CONFIG_VIDEO_OV5650) += ov5650.o
diff --git a/drivers/media/video/tegra/ov5650.c b/drivers/media/video/tegra/ov5650.c
new file mode 100755
index 000000000000..579249da8f43
--- /dev/null
+++ b/drivers/media/video/tegra/ov5650.c
@@ -0,0 +1,765 @@
+/*
+ * ov5650.c - ov5650 sensor driver
+ *
+ * Copyright (C) 2010 Google Inc.
+ *
+ * Contributors:
+ * Rebecca Schultz Zavin <rebecca@android.com>
+ *
+ * Leverage OV9640.c
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/i2c.h>
+#include <linux/miscdevice.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <media/ov5650.h>
+
+struct ov5650_reg {
+ u16 addr;
+ u16 val;
+};
+
+struct ov5650_info {
+ int mode;
+ struct i2c_client *i2c_client;
+ struct ov5650_platform_data *pdata;
+};
+
+#define OV5650_TABLE_WAIT_MS 0
+#define OV5650_TABLE_END 1
+#define OV5650_MAX_RETRIES 3
+
+static struct ov5650_reg mode_start[] = {
+ {0x3008, 0x82}, /* reset registers pg 72 */
+ {OV5650_TABLE_WAIT_MS, 5},
+ {0x3008, 0x42}, /* register power down pg 72 */
+ {OV5650_TABLE_WAIT_MS, 5},
+ {0x3103, 0x93}, /* power up system clock from PLL page 77 */
+ {0x3017, 0xff}, /* PAD output enable page 100 */
+ {0x3018, 0xfc}, /* PAD output enable page 100 */
+
+ {0x3600, 0x50}, /* analog pg 108 */
+ {0x3601, 0x0d}, /* analog pg 108 */
+ {0x3604, 0x50}, /* analog pg 108 */
+ {0x3605, 0x04}, /* analog pg 108 */
+ {0x3606, 0x3f}, /* analog pg 108 */
+ {0x3612, 0x1a}, /* analog pg 108 */
+ {0x3630, 0x22}, /* analog pg 108 */
+ {0x3631, 0x22}, /* analog pg 108 */
+ {0x3702, 0x3a}, /* analog pg 108 */
+ {0x3704, 0x18}, /* analog pg 108 */
+ {0x3705, 0xda}, /* analog pg 108 */
+ {0x3706, 0x41}, /* analog pg 108 */
+ {0x370a, 0x80}, /* analog pg 108 */
+ {0x370b, 0x40}, /* analog pg 108 */
+ {0x370e, 0x00}, /* analog pg 108 */
+ {0x3710, 0x28}, /* analog pg 108 */
+ {0x3712, 0x13}, /* analog pg 108 */
+ {0x3830, 0x50}, /* manual exposure gain bit [0] */
+ {0x3a18, 0x00}, /* AEC gain ceiling bit 8 pg 114 */
+ {0x3a19, 0xf8}, /* AEC gain ceiling pg 114 */
+ {0x3a00, 0x38}, /* AEC control 0 debug mode band low
+ limit mode band func pg 112 */
+
+ {0x3603, 0xa7}, /* analog pg 108 */
+ {0x3615, 0x50}, /* analog pg 108 */
+ {0x3620, 0x56}, /* analog pg 108 */
+ {0x3810, 0x00}, /* TIMING HVOFFS both are zero pg 80 */
+ {0x3836, 0x00}, /* TIMING HVPAD both are zero pg 82 */
+ {0x3a1a, 0x06}, /* DIFF MAX an AEC register??? pg 114 */
+ {0x4000, 0x01}, /* BLC enabled pg 120 */
+ {0x401c, 0x48}, /* reserved pg 120 */
+ {0x401d, 0x28}, /* BLC control pg 120 */
+ {0x5000, 0x00}, /* ISP control00 features are disabled. pg 132 */
+ {0x5001, 0x00}, /* ISP control01 awb disabled. pg 132 */
+ {0x5002, 0x00}, /* ISP control02 debug mode disabled pg 132 */
+ {0x503d, 0x00}, /* ISP control3D features disabled pg 133 */
+ {0x5046, 0x00}, /* ISP control isp disable awbg disable pg 133 */
+
+ {0x300f, 0x8f}, /* PLL control00 R_SELD5 [7:6] div by 4 R_DIVL [2]
+ two lane div 1 SELD2P5 [1:0] div 2.5 pg 99 */
+ {0x3010, 0x10}, /* PLL control01 DIVM [3:0] DIVS [7:4] div 1 pg 99 */
+ {0x3011, 0x14}, /* PLL control02 R_DIVP [5:0] div 20 pg 99 */
+ {0x3012, 0x02}, /* PLL CTR 03, default */
+ {0x3815, 0x82}, /* PCLK to SCLK ratio bit[4:0] is set to 2 pg 81 */
+ {0x3503, 0x33}, /* AEC auto AGC auto gain has no latch delay. pg 38 */
+ /* {FAST_SETMODE_START, 0}, */
+ {0x3613, 0x44}, /* analog pg 108 */
+ {OV5650_TABLE_END, 0x0},
+};
+
+static struct ov5650_reg mode_2592x1944[] = {
+ {0x3621, 0x2f}, /* analog horizontal binning/sampling not enabled.
+ pg 108 */
+ {0x3632, 0x55}, /* analog pg 108 */
+ {0x3703, 0xe6}, /* analog pg 108 */
+ {0x370c, 0xa0}, /* analog pg 108 */
+ {0x370d, 0x04}, /* analog pg 108 */
+ {0x3713, 0x2f}, /* analog pg 108 */
+ {0x3800, 0x02}, /* HREF start point higher 4 bits [3:0] pg 108 */
+ {0x3801, 0x58}, /* HREF start point lower 8 bits [7:0] pg 108 */
+ {0x3802, 0x00}, /* VREF start point higher 4 bits [3:0] pg 108 */
+ {0x3803, 0x0c}, /* VREF start point [7:0] pg 108 */
+ {0x3804, 0x0a}, /* HREF width higher 4 bits [3:0] pg 108 */
+ {0x3805, 0x20}, /* HREF width lower 8 bits [7:0] pg 108 */
+ {0x3806, 0x07}, /* VREF height higher 4 bits [3:0] pg 109 */
+ {0x3807, 0xa0}, /* VREF height lower 8 bits [7:0] pg 109 */
+ {0x3808, 0x0a}, /* DVP horizontal output size higher 4 bits [3:0]
+ pg 109 */
+ {0x3809, 0x20}, /* DVP horizontal output size lower 8 bits [7:0]
+ pg 109 */
+ {0x380a, 0x07}, /* DVP vertical output size higher 4 bits [3:0]
+ pg 109 */
+ {0x380b, 0xa0}, /* DVP vertical output size lower 8 bits [7:0]
+ pg 109 */
+ {0x380c, 0x0c}, /* total horizontal size higher 5 bits [4:0] pg 109,
+ line length */
+ {0x380d, 0xb4}, /* total horizontal size lower 8 bits [7:0] pg 109,
+ line length */
+ {0x380e, 0x07}, /* total vertical size higher 5 bits [4:0] pg 109,
+ frame length */
+ {0x380f, 0xb0}, /* total vertical size lower 8 bits [7:0] pg 109,
+ frame length */
+ {0x3818, 0xc0}, /* timing control reg18 mirror & dkhf pg 110 */
+ {0x381a, 0x3c}, /* HS mirror adjustment pg 110 */
+ {0x3a0d, 0x06}, /* b60 max pg 113 */
+ {0x3c01, 0x00}, /* 5060HZ_CTRL01 pg 116 */
+ {0x3007, 0x3f}, /* clock enable03 pg 98 */
+ {0x5059, 0x80}, /* => NOT found */
+ {0x3003, 0x03}, /* reset MIPI and DVP pg 97 */
+ {0x3500, 0x00}, /* long exp 1/3 in unit of 1/16 line, pg 38 */
+ {0x3501, 0x7a}, /* long exp 2/3 in unit of 1/16 line, pg 38,
+ note frame length start with 0x7b0,
+ and SENSOR_BAYER_DEFAULT_MAX_COARSE_DIFF=3 */
+ {0x3502, 0xd0}, /* long exp 3/3 in unit of 1/16 line, pg 38.
+ Two lines of integration time. */
+ {0x350a, 0x00}, /* gain output to sensor, pg 38 */
+ {0x350b, 0x00}, /* gain output to sensor, pg 38 */
+ {0x4801, 0x0f}, /* MIPI control01 pg 125 */
+ {0x300e, 0x0c}, /* SC_MIPI_SC_CTRL0 pg 73 */
+ {0x4803, 0x50}, /* MIPI CTRL3 pg 91 */
+ {0x4800, 0x34}, /* MIPI CTRl0 idle and short line pg 89 */
+ {OV5650_TABLE_END, 0x0000}
+};
+
+static struct ov5650_reg mode_1296x972[] = {
+ {0x3621, 0xaf}, /* analog horizontal binning/sampling not enabled.
+ pg 108 */
+ {0x3632, 0x5a}, /* analog pg 108 */
+ {0x3703, 0xb0}, /* analog pg 108 */
+ {0x370c, 0xc5}, /* analog pg 108 */
+ {0x370d, 0x42}, /* analog pg 108 */
+ {0x3713, 0x2f}, /* analog pg 108 */
+ {0x3800, 0x03}, /* HREF start point higher 4 bits [3:0] pg 108 */
+ {0x3801, 0x3c}, /* HREF start point lower 8 bits [7:0] pg 108 */
+ {0x3802, 0x00}, /* VREF start point higher 4 bits [3:0] pg 108 */
+ {0x3803, 0x06}, /* VREF start point [7:0] pg 108 */
+ {0x3804, 0x05}, /* HREF width higher 4 bits [3:0] pg 108 */
+ {0x3805, 0x10}, /* HREF width lower 8 bits [7:0] pg 108 */
+ {0x3806, 0x03}, /* VREF height higher 4 bits [3:0] pg 109 */
+ {0x3807, 0xd0}, /* VREF height lower 8 bits [7:0] pg 109 */
+ {0x3808, 0x05}, /* DVP horizontal output size higher 4 bits [3:0]
+ pg 109 */
+ {0x3809, 0x10}, /* DVP horizontal output size lower 8 bits [7:0]
+ pg 109 */
+ {0x380a, 0x03}, /* DVP vertical output size higher 4 bits [3:0]
+ pg 109 */
+ {0x380b, 0xd0}, /* DVP vertical output size lower 8 bits [7:0]
+ pg 109 */
+ {0x380c, 0x08}, /* total horizontal size higher 5 bits [4:0]
+ pg 109, line length */
+ {0x380d, 0xa8}, /* total horizontal size lower 8 bits [7:0] pg 109,
+ line length */
+ {0x380e, 0x05}, /* total vertical size higher 5 bits [4:0] pg 109,
+ frame length */
+ {0x380f, 0xa4}, /* total horizontal size lower 8 bits [7:0] pg 109,
+ frame length */
+ {0x3818, 0xc1}, /* timing control reg18 mirror & dkhf pg 110 */
+ {0x381a, 0x00}, /* HS mirror adjustment pg 110 */
+ {0x3a0d, 0x08}, /* b60 max pg 113 */
+ {0x3c01, 0x00}, /* 5060HZ_CTRL01 pg 116 */
+ {0x3007, 0x3b}, /* clock enable03 pg 98 */
+ {0x5059, 0x80}, /* => NOT found. added */
+ {0x3003, 0x03}, /* reset MIPI and DVP pg 97 */
+ {0x3500, 0x00}, /* long exp 1/3 in unit of 1/16 line, pg 38,
+ note frame length is from 0x5a4,
+ and SENSOR_BAYER_DEFAULT_MAX_COARSE_DIFF=3 */
+ {0x3501, 0x5a}, /* long exp 2/3 in unit of 1/16 line, pg 38 */
+ {0x3502, 0x10}, /* long exp 3/3 in unit of 1/16 line, pg 38 */
+ {0x350a, 0x00}, /* gain output to sensor, pg 38 */
+ {0x350b, 0x10}, /* gain output to sensor, pg 38 */
+ {0x4801, 0x0f}, /* MIPI control01 pg 125 */
+ {0x300e, 0x0c}, /* SC_MIPI_SC_CTRL0 pg 73 */
+ {0x4803, 0x50}, /* MIPI CTRL3 pg 91 */
+ {0x4800, 0x34}, /* MIPI CTRl0 idle and short line pg 89 */
+ {OV5650_TABLE_END, 0x0000}
+};
+
+static struct ov5650_reg mode_1920x1088[] = {
+ {0x3621, 0x2f}, /* analog horizontal binning/sampling not enabled.
+ pg 108 */
+ {0x3632, 0x55}, /* analog pg 108 */
+ {0x3703, 0xe6}, /* analog pg 108 */
+ {0x370c, 0xa0}, /* analog pg 108 */
+ {0x370d, 0x04}, /* analog pg 108 */
+ {0x3713, 0x2f}, /* analog pg 108 */
+ {0x3800, 0x02}, /* HREF start point higher 4 bits [3:0] pg 108 */
+ {0x3801, 0x58}, /* HREF start point lower 8 bits [7:0] pg 108 */
+ {0x3802, 0x00}, /* VREF start point higher 4 bits [3:0] pg 108 */
+ {0x3803, 0x0c}, /* VREF start point [7:0] pg 108 */
+ {0x3804, 0x0a}, /* HREF width higher 4 bits [3:0] pg 108 */
+ {0x3805, 0x20}, /* HREF width lower 8 bits [7:0] pg 108 */
+ {0x3806, 0x07}, /* VREF height higher 4 bits [3:0] pg 109 */
+ {0x3807, 0xa0}, /* VREF height lower 8 bits [7:0] pg 109 */
+ {0x3808, 0x0a}, /* DVP horizontal output size higher 4 bits [3:0]
+ pg 109 */
+ {0x3809, 0x20}, /* DVP horizontal output size lower 8 bits [7:0]
+ pg 109 */
+ {0x380a, 0x07}, /* DVP vertical output size higher 4 bits [3:0]
+ pg 109 */
+ {0x380b, 0xa0}, /* DVP vertical output size lower 8 bits [7:0]
+ pg 109 */
+ {0x380c, 0x0c}, /* total horizontal size higher 5 bits [4:0] pg 109,
+ line length */
+ {0x380d, 0xb4}, /* total horizontal size lower 8 bits [7:0] pg 109,
+ line length */
+ {0x380e, 0x07}, /* total vertical size higher 5 bits [4:0] pg 109,
+ frame length */
+ {0x380f, 0xb0}, /* total vertical size lower 8 bits [7:0] pg 109,
+ frame length */
+ {0x3818, 0xc0}, /* timing control reg18 mirror & dkhf pg 110 */
+ {0x381a, 0x3c}, /* HS mirror adjustment pg 110 */
+ {0x3a0d, 0x06}, /* b60 max pg 113 */
+ {0x3c01, 0x00}, /* 5060HZ_CTRL01 pg 116 */
+ {0x3007, 0x3f}, /* clock enable03 pg 98 */
+ {0x5059, 0x80}, /* => NOT found */
+ {0x3003, 0x03}, /* reset MIPI and DVP pg 97 */
+ {0x3500, 0x00}, /* long exp 1/3 in unit of 1/16 line, pg 38 */
+ {0x3501, 0x7a}, /* long exp 2/3 in unit of 1/16 line, pg 38,
+ note frame length start with 0x7b0,
+ and SENSOR_BAYER_DEFAULT_MAX_COARSE_DIFF=3 */
+ {0x3502, 0xd0}, /* long exp 3/3 in unit of 1/16 line, pg 38.
+ Two lines of integration time. */
+ {0x350a, 0x00}, /* gain output to sensor, pg 38 */
+ {0x350b, 0x00}, /* gain output to sensor, pg 38 */
+ {0x4801, 0x0f}, /* MIPI control01 pg 125 */
+ {0x300e, 0x0c}, /* SC_MIPI_SC_CTRL0 pg 73 */
+ {0x4803, 0x50}, /* MIPI CTRL3 pg 91 */
+ {0x4800, 0x34}, /* MIPI CTRl0 idle and short line pg 89 */
+ {OV5650_TABLE_END, 0x0000}
+};
+
+static struct ov5650_reg mode_1264x704[] = {
+ {0x3600, 0x54}, /* analog pg 108 */
+ {0x3601, 0x05}, /* analog pg 108 */
+ {0x3604, 0x40}, /* analog pg 108 */
+ {0x3705, 0xdb}, /* analog pg 108 */
+ {0x370a, 0x81}, /* analog pg 108 */
+ {0x3615, 0x52}, /* analog pg 108 */
+ {0x3810, 0x40}, /* TIMING HVOFFS both are zero pg 80 */
+ {0x3836, 0x41}, /* TIMING HVPAD both are zero pg 82 */
+ {0x4000, 0x05}, /* BLC enabled pg 120 */
+ {0x401c, 0x42}, /* reserved pg 120 */
+ {0x5046, 0x09}, /* ISP control isp disable awbg disable pg 133 */
+ {0x3010, 0x00}, /* PLL control01 DIVM [3:0] DIVS [7:4] div 1 pg 99 */
+ {0x3503, 0x00}, /* AEC auto AGC auto gain has no latch delay. pg 38 */
+ {0x3613, 0xc4}, /* analog pg 108 */
+
+ {0x3621, 0xaf}, /* analog horizontal binning/sampling not enabled.
+ pg 108 */
+ {0x3632, 0x55}, /* analog pg 108 */
+ {0x3703, 0x9a}, /* analog pg 108 */
+ {0x370c, 0x00}, /* analog pg 108 */
+ {0x370d, 0x42}, /* analog pg 108 */
+ {0x3713, 0x22}, /* analog pg 108 */
+ {0x3800, 0x02}, /* HREF start point higher 4 bits [3:0] pg 108 */
+ {0x3801, 0x54}, /* HREF start point lower 8 bits [7:0] pg 108 */
+ {0x3802, 0x00}, /* VREF start point higher 4 bits [3:0] pg 108 */
+ {0x3803, 0x0c}, /* VREF start point [7:0] pg 108 */
+ {0x3804, 0x05}, /* HREF width higher 4 bits [3:0] pg 108 */
+ {0x3805, 0x00}, /* HREF width lower 8 bits [7:0] pg 108 */
+ {0x3806, 0x02}, /* VREF height higher 4 bits [3:0] pg 109 */
+ {0x3807, 0xd0}, /* VREF height lower 8 bits [7:0] pg 109 */
+ {0x3808, 0x05}, /* DVP horizontal output size higher 4 bits [3:0]
+ pg 109 */
+ {0x3809, 0x00}, /* DVP horizontal output size lower 8 bits [7:0]
+ pg 109 */
+ {0x380a, 0x02}, /* DVP vertical output size higher 4 bits [3:0]
+ pg 109 */
+ {0x380b, 0xd0}, /* DVP vertical output size lower 8 bits [7:0]
+ pg 109 */
+ {0x380c, 0x08}, /* total horizontal size higher 5 bits [4:0] pg 109,
+ line length */
+ {0x380d, 0x72}, /* total horizontal size lower 8 bits [7:0] pg 109,
+ line length */
+ {0x380e, 0x02}, /* total vertical size higher 5 bits [4:0] pg 109,
+ frame length */
+ {0x380f, 0xe4}, /* total vertical size lower 8 bits [7:0] pg 109,
+ frame length */
+ {0x3818, 0xc1}, /* timing control reg18 mirror & dkhf pg 110 */
+ {0x381a, 0x3c}, /* HS mirror adjustment pg 110 */
+ {0x3a0d, 0x06}, /* b60 max pg 113 */
+ {0x3c01, 0x34}, /* 5060HZ_CTRL01 pg 116 */
+ {0x3007, 0x3b}, /* clock enable03 pg 98 */
+ {0x5059, 0x80}, /* => NOT found */
+ {0x3003, 0x03}, /* reset MIPI and DVP pg 97 */
+ {0x3500, 0x04}, /* long exp 1/3 in unit of 1/16 line, pg 38 */
+ {0x3501, 0xa5}, /* long exp 2/3 in unit of 1/16 line, pg 38,
+ note frame length start with 0x7b0,
+ and SENSOR_BAYER_DEFAULT_MAX_COARSE_DIFF=3 */
+ {0x3502, 0x10}, /* long exp 3/3 in unit of 1/16 line, pg 38.
+ Two lines of integration time. */
+ {0x350a, 0x00}, /* gain output to sensor, pg 38 */
+ {0x350b, 0x00}, /* gain output to sensor, pg 38 */
+ {0x4801, 0x0f}, /* MIPI control01 pg 125 */
+ {0x300e, 0x0c}, /* SC_MIPI_SC_CTRL0 pg 73 */
+ {0x4803, 0x50}, /* MIPI CTRL3 pg 91 */
+ {0x4800, 0x24}, /* MIPI CTRl0 idle and short line pg 89 */
+
+ {0x300f, 0x8b}, /* PLL control00 R_SELD5 [7:6] div by 4 R_DIVL [2]
+ two lane div 1 SELD2P5 [1:0] div 2.5 pg 99 */
+
+ {0x3711, 0x24},
+ {0x3713, 0x92},
+ {0x3714, 0x17},
+ {0x381c, 0x10},
+ {0x381d, 0x82},
+ {0x381e, 0x05},
+ {0x381f, 0xc0},
+ {0x3821, 0x20},
+ {0x3824, 0x23},
+ {0x3825, 0x2c},
+ {0x3826, 0x00},
+ {0x3827, 0x0c},
+ {0x3623, 0x01},
+ {0x3633, 0x24},
+ {0x3632, 0x5f},
+ {0x401f, 0x03},
+
+ {OV5650_TABLE_END, 0x0000}
+};
+
+static struct ov5650_reg mode_end[] = {
+ {0x3212, 0x00}, /* SRM_GROUP_ACCESS (group hold begin) */
+ {0x3003, 0x01}, /* reset DVP pg 97 */
+ {0x3212, 0x10}, /* SRM_GROUP_ACCESS (group hold end) */
+ {0x3212, 0xa0}, /* SRM_GROUP_ACCESS (group hold launch) */
+ {0x3008, 0x02}, /* SYSTEM_CTRL0 mipi suspend mask pg 98 */
+
+ /* {FAST_SETMODE_END, 0}, */
+ {OV5650_TABLE_END, 0x0000}
+};
+
+enum {
+ OV5650_MODE_2592x1944,
+ OV5650_MODE_1296x972,
+ OV5650_MODE_1920x1088,
+ OV5650_MODE_1264x704,
+};
+
+static struct ov5650_reg *mode_table[] = {
+ [OV5650_MODE_2592x1944] = mode_2592x1944,
+ [OV5650_MODE_1296x972] = mode_1296x972,
+ [OV5650_MODE_1920x1088] = mode_1920x1088,
+ [OV5650_MODE_1264x704] = mode_1264x704,
+};
+
+/* 2 regs to program frame length */
+static inline void ov5650_get_frame_length_regs(struct ov5650_reg *regs,
+ u32 frame_length)
+{
+ regs->addr = 0x380e;
+ regs->val = (frame_length >> 8) & 0xff;
+ (regs + 1)->addr = 0x380f;
+ (regs + 1)->val = (frame_length) & 0xff;
+}
+
+/* 3 regs to program coarse time */
+static inline void ov5650_get_coarse_time_regs(struct ov5650_reg *regs,
+ u32 coarse_time)
+{
+ regs->addr = 0x3500;
+ regs->val = (coarse_time >> 12) & 0xff;
+ (regs + 1)->addr = 0x3501;
+ (regs + 1)->val = (coarse_time >> 4) & 0xff;
+ (regs + 2)->addr = 0x3502;
+ (regs + 2)->val = (coarse_time & 0xf) << 4;
+}
+
+/* 1 reg to program gain */
+static inline void ov5650_get_gain_reg(struct ov5650_reg *regs, u16 gain)
+{
+ regs->addr = 0x350b;
+ regs->val = gain;
+}
+
+static int ov5650_read_reg(struct i2c_client *client, u16 addr, u8 *val)
+{
+ int err;
+ struct i2c_msg msg[2];
+ unsigned char data[3];
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].len = 2;
+ msg[0].buf = data;
+
+ /* high byte goes out first */
+ data[0] = (u8) (addr >> 8);;
+ data[1] = (u8) (addr & 0xff);
+
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].len = 1;
+ msg[1].buf = data + 2;
+
+ err = i2c_transfer(client->adapter, msg, 2);
+
+ if (err != 2)
+ return -EINVAL;
+
+ *val = data[2];
+
+ return 0;
+}
+
+static int ov5650_write_reg(struct i2c_client *client, u16 addr, u8 val)
+{
+ int err;
+ struct i2c_msg msg;
+ unsigned char data[3];
+ int retry = 0;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ data[0] = (u8) (addr >> 8);;
+ data[1] = (u8) (addr & 0xff);
+ data[2] = (u8) (val & 0xff);
+
+ msg.addr = client->addr;
+ msg.flags = 0;
+ msg.len = 3;
+ msg.buf = data;
+
+ do {
+ err = i2c_transfer(client->adapter, &msg, 1);
+ if (err == 1)
+ return 0;
+ retry++;
+ pr_err("ov5650: i2c transfer failed, retrying %x %x\n",
+ addr, val);
+ msleep(3);
+ } while (retry <= OV5650_MAX_RETRIES);
+
+ return err;
+}
+
+static int ov5650_write_table(struct i2c_client *client,
+ const struct ov5650_reg table[],
+ const struct ov5650_reg override_list[],
+ int num_override_regs)
+{
+ int err;
+ const struct ov5650_reg *next;
+ int i;
+ u16 val;
+
+ for (next = table; next->addr != OV5650_TABLE_END; next++) {
+ if (next->addr == OV5650_TABLE_WAIT_MS) {
+ msleep(next->val);
+ continue;
+ }
+
+ val = next->val;
+
+ /* When an override list is passed in, replace the reg */
+ /* value to write if the reg is in the list */
+ if (override_list) {
+ for (i = 0; i < num_override_regs; i++) {
+ if (next->addr == override_list[i].addr) {
+ val = override_list[i].val;
+ break;
+ }
+ }
+ }
+
+ err = ov5650_write_reg(client, next->addr, val);
+ if (err)
+ return err;
+ }
+ return 0;
+}
+
+static int ov5650_set_mode(struct ov5650_info *info, struct ov5650_mode *mode)
+{
+ int sensor_mode;
+ int err;
+ struct ov5650_reg reg_list[6];
+
+ pr_info("%s: xres %u yres %u framelength %u coarsetime %u gain %u\n",
+ __func__, mode->xres, mode->yres, mode->frame_length,
+ mode->coarse_time, mode->gain);
+ if (mode->xres == 2592 && mode->yres == 1944)
+ sensor_mode = OV5650_MODE_2592x1944;
+ else if (mode->xres == 1296 && mode->yres == 972)
+ sensor_mode = OV5650_MODE_1296x972;
+ else if (mode->xres == 1920 && mode->yres == 1088)
+ sensor_mode = OV5650_MODE_1920x1088;
+ else if (mode->xres == 1264 && mode->yres == 704)
+ sensor_mode = OV5650_MODE_1264x704;
+ else {
+ pr_err("%s: invalid resolution supplied to set mode %d %d\n",
+ __func__, mode->xres, mode->yres);
+ return -EINVAL;
+ }
+
+ /* get a list of override regs for the asking frame length, */
+ /* coarse integration time, and gain. */
+ ov5650_get_frame_length_regs(reg_list, mode->frame_length);
+ ov5650_get_coarse_time_regs(reg_list + 2, mode->coarse_time);
+ ov5650_get_gain_reg(reg_list + 5, mode->gain);
+
+ err = ov5650_write_table(info->i2c_client, mode_start, NULL, 0);
+ if (err)
+ return err;
+
+ err = ov5650_write_table(info->i2c_client, mode_table[sensor_mode],
+ reg_list, 6);
+ if (err)
+ return err;
+
+ err = ov5650_write_table(info->i2c_client, mode_end, NULL, 0);
+ if (err)
+ return err;
+
+ info->mode = sensor_mode;
+ return 0;
+}
+
+static int ov5650_set_frame_length(struct ov5650_info *info, u32 frame_length)
+{
+ struct ov5650_reg reg_list[2];
+ int i = 0;
+ int ret;
+
+ ov5650_get_frame_length_regs(reg_list, frame_length);
+
+ for (i = 0; i < 2; i++) {
+ ret = ov5650_write_reg(info->i2c_client, reg_list[i].addr,
+ reg_list[i].val);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int ov5650_set_coarse_time(struct ov5650_info *info, u32 coarse_time)
+{
+ int ret;
+
+ struct ov5650_reg reg_list[3];
+ int i = 0;
+
+ ov5650_get_coarse_time_regs(reg_list, coarse_time);
+
+ ret = ov5650_write_reg(info->i2c_client, 0x3212, 0x01);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < 3; i++) {
+ ret = ov5650_write_reg(info->i2c_client, reg_list[i].addr,
+ reg_list[i].val);
+ if (ret)
+ return ret;
+ }
+
+ ret = ov5650_write_reg(info->i2c_client, 0x3212, 0x11);
+ if (ret)
+ return ret;
+
+ ret = ov5650_write_reg(info->i2c_client, 0x3212, 0xa1);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int ov5650_set_gain(struct ov5650_info *info, u16 gain)
+{
+ int ret;
+ struct ov5650_reg reg_list;
+
+ ov5650_get_gain_reg(&reg_list, gain);
+
+ ret = ov5650_write_reg(info->i2c_client, reg_list.addr, reg_list.val);
+
+ return ret;
+}
+
+static int ov5650_get_status(struct ov5650_info *info, u8 *status)
+{
+ int err;
+
+ *status = 0;
+ err = ov5650_read_reg(info->i2c_client, 0x002, status);
+ return err;
+}
+
+
+static long ov5650_ioctl(struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ int err;
+ struct ov5650_info *info = file->private_data;
+
+ switch (cmd) {
+ case OV5650_IOCTL_SET_MODE:
+ {
+ struct ov5650_mode mode;
+ if (copy_from_user(&mode,
+ (const void __user *)arg,
+ sizeof(struct ov5650_mode))) {
+ return -EFAULT;
+ }
+
+ return ov5650_set_mode(info, &mode);
+ }
+ case OV5650_IOCTL_SET_FRAME_LENGTH:
+ return ov5650_set_frame_length(info, (u32)arg);
+ case OV5650_IOCTL_SET_COARSE_TIME:
+ return ov5650_set_coarse_time(info, (u32)arg);
+ case OV5650_IOCTL_SET_GAIN:
+ return ov5650_set_gain(info, (u16)arg);
+ case OV5650_IOCTL_GET_STATUS:
+ {
+ u8 status;
+
+ err = ov5650_get_status(info, &status);
+ if (err)
+ return err;
+ if (copy_to_user((void __user *)arg, &status,
+ 2)) {
+ return -EFAULT;
+ }
+ return 0;
+ }
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static struct ov5650_info *info;
+
+static int ov5650_open(struct inode *inode, struct file *file)
+{
+ u8 status;
+
+ file->private_data = info;
+ if (info->pdata && info->pdata->power_on)
+ info->pdata->power_on();
+ ov5650_get_status(info, &status);
+ return 0;
+}
+
+int ov5650_release(struct inode *inode, struct file *file)
+{
+ if (info->pdata && info->pdata->power_off)
+ info->pdata->power_off();
+ file->private_data = NULL;
+ return 0;
+}
+
+
+static const struct file_operations ov5650_fileops = {
+ .owner = THIS_MODULE,
+ .open = ov5650_open,
+ .unlocked_ioctl = ov5650_ioctl,
+ .release = ov5650_release,
+};
+
+static struct miscdevice ov5650_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "ov5650",
+ .fops = &ov5650_fileops,
+};
+
+static int ov5650_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int err;
+
+ pr_info("ov5650: probing sensor.\n");
+
+ info = kzalloc(sizeof(struct ov5650_info), GFP_KERNEL);
+ if (!info) {
+ pr_err("ov5650: Unable to allocate memory!\n");
+ return -ENOMEM;
+ }
+
+ err = misc_register(&ov5650_device);
+ if (err) {
+ pr_err("ov5650: Unable to register misc device!\n");
+ kfree(info);
+ return err;
+ }
+
+ info->pdata = client->dev.platform_data;
+ info->i2c_client = client;
+
+ i2c_set_clientdata(client, info);
+ return 0;
+}
+
+static int ov5650_remove(struct i2c_client *client)
+{
+ struct ov5650_info *info;
+ info = i2c_get_clientdata(client);
+ misc_deregister(&ov5650_device);
+ kfree(info);
+ return 0;
+}
+
+static const struct i2c_device_id ov5650_id[] = {
+ { "ov5650", 0 },
+ { },
+};
+
+MODULE_DEVICE_TABLE(i2c, ov5650_id);
+
+static struct i2c_driver ov5650_i2c_driver = {
+ .driver = {
+ .name = "ov5650",
+ .owner = THIS_MODULE,
+ },
+ .probe = ov5650_probe,
+ .remove = ov5650_remove,
+ .id_table = ov5650_id,
+};
+
+static int __init ov5650_init(void)
+{
+ pr_info("ov5650 sensor driver loading\n");
+ return i2c_add_driver(&ov5650_i2c_driver);
+}
+
+static void __exit ov5650_exit(void)
+{
+ i2c_del_driver(&ov5650_i2c_driver);
+}
+
+module_init(ov5650_init);
+module_exit(ov5650_exit);
+
generated by cgit v1.2.3 (git 2.0.4) at 2024-07-06 18:49:44 +0000